Fits 2008-2016 Ford F-250 and F-350 Super Duty models.

Carli Fabricated Rear Shock Mounts provide a significant strength upgrade over the thin factory mounts, which are known to flex or fail under heavy use. Engineered to accommodate larger diameter shocks, these mounts allow for the installation of up to a 3.0" bypass or smooth-body shock. The design ensures proper clearance and structural integrity for off-road performance and heavy towing applications.

Construction features include a heavy-duty fabricated steel design finished in a durable black powdercoat for long-term corrosion resistance. Installation is a straightforward bolt-on process that utilizes factory mounting locations and requires no welding.

• Fits shocks up to 3.0" in diameter
• Durable black powdercoat finish
• Direct bolt-on installation; no welding required
• Includes all necessary Grade 8 mounting hardware
• Replaces weak factory rear shock mounts

Fits 2005-2016 Ford F-250 and F-350 Super Duty 4WD trucks with a 4.5-inch lift.

When lifting your Super Duty, maintaining proper suspension geometry is essential for protecting your components. These Carli Suspension front bump stop drop brackets relocate the factory bump stops downward to account for the increased ride height. This ensures the bump stops engage at the appropriate point in the suspension cycle, preventing over-compression of the shocks and protecting the front-end components from damage during hard bottom-outs.

• Designed specifically for 4.5-inch lift systems
• Heavy-duty fabricated steel construction for superior strength
• Durable black powder coat finish for long-lasting corrosion resistance
• Includes high-strength Grade 8 mounting hardware
• Direct-fit installation into factory locations
• Manufacturer Part Number: CS-FBDF05-45

Fits select 2005-2016 Ford F-250 and F-350 Super Duty models.

Carli Front Bump Stop Drop Pucks provide essential geometry correction for Super Duty trucks equipped with 2.5 inches of front lift. By lowering the factory bump stop mounting point, these spacers ensure the suspension contacts the bump stop at the correct interval, preventing over-compression of the shocks and protecting front-end components during hard bottom-out events.

Each puck is CNC-machined from billet aluminum and finished in a durable gray anodize for superior corrosion resistance in harsh underbody environments. This kit includes all necessary high-strength Grade 8 hardware to ensure a secure, bolt-on installation to the factory mounting locations.

• Specifically designed for 2.5" lift heights
• Corrects bump stop geometry to prevent shock bottoming
• CNC-machined billet aluminum construction
• Gray anodized finish for long-term durability
• Includes Grade 8 mounting hardware
• Manufacturer Part Number: CS-FBDF05-25

Fits 2011-2023 Ford F-250 and F-350 Super Duty 4x4 models with gas engines and a 2.5-inch front lift.

Specifically engineered for the unique weight distribution of gas-powered Super Duty trucks, the Carli Signature Series 2.0 IFP (Internal Floating Piston) shock package is designed to replace factory shocks for a significant upgrade in ride quality. These shocks are valved for balanced performance across on-road commuting, highway travel, and heavy-duty towing or hauling, making them an ideal all-around suspension solution for leveled trucks.

The 2.0-inch aluminum shock bodies provide superior heat dissipation and excellent corrosion resistance compared to steel alternatives. This package is optimized for use with Carli leveling springs, delivering increased suspension travel to better manage rough terrain and road imperfections.

• Manufacturer Part Number: AS-FLVLSPKG-CS20IFP-C
• Shock Diameter: 2.0" aluminum body for cooling and durability
• Front Travel: 9.0 inches
• Rear Travel: 12.3 inches
• Tuning: Carli-proprietary gas-specific valving
• Configuration: Front and rear shock set

Fits 2019-2025 Ram 2500 4x4 Diesel models (excluding trucks equipped with factory rear air ride).

The Carli Pathfinder System is engineered as a comprehensive suspension solution that balances daily driving comfort with rugged off-road capability. At the heart of this system are the Carli-Spec 2.5-inch shocks, which are specifically tuned to provide superior cooling and damping control compared to standard leveling kits. These shocks feature a durable gray hardcoat finish for maximum corrosion resistance and longevity in harsh environments.

This system replaces the harsh factory front-end components with premium hardware designed for improved articulation and stability. The included soft-ride coil springs eliminate the stiff factory ride, while the adjustable track bar allows you to perfectly center the front axle after leveling the vehicle.

• Carli-Spec 2.5-inch Pathfinder shock package with gray hardcoat finish
• Carli soft-ride front coil springs for improved comfort
• Adjustable track bar for precise axle alignment
• Maintains stability and control during towing and hauling
• Bolt-on installation to factory mounting points
• Manufacturer Part Number: CS-DLVL-PF-19-D-2500

Fits select 2013-2025 Ram 2500 and 3500 4WD trucks. This comprehensive package replaces the failure-prone factory ball joints with Carli’s extreme-duty components, designed to withstand heavy loads and harsh environments without the use of isolating sleeves that often serve as point-of-failure locations.

Carli Extreme-Duty upper ball joints utilize a unique design where the pin "hat" contacts the housing, creating a second wear surface to distribute lateral loads more effectively. The lower ball joints feature a bronze wear surface preloaded by a disc spring, safety washer, and snap ring, ensuring the wear surfaces remain tightly coupled for long-term steering precision. Each joint undergoes a specialized copper-masking and carburizing process, resulting in a case-hardness depth of 0.020"–0.025" on the wear surfaces while maintaining internal integrity.

• Manufacturer Part Number: CS-DBJP-14
• Includes: 2 upper ball joints, 2 lower ball joints, installation tool, and Redline CV2 grease.
• Materials: Carburized steel with corrosion-resistant gray coating and Viton environmental seals.
• Maintenance: Accessible grease fittings (recessed and angled on the lower joints for protection).
• Warranty: Manufacturer lifetime warranty against excessive play.
• Construction: No-liner design eliminates plastic or Teflon components that degrade over time.

Fits select 2023-2026 Ford F-250 and F-350 Super Duty 4x4 models.

When lifting the front of a 2023+ Super Duty by 3 to 3.5 inches, factory caster is reduced by approximately 1.5 degrees, which can negatively impact steering tracking and stability. These Carli Suspension Radius Arm Drop Brackets solve this by lowering the pivot point of the radius arms, restoring the correct geometry and caster angle. This correction ensures your truck holds its lane better and provides a more natural return-to-center feel after turns, especially when running larger 37-inch tires.

• Fabricated from heavy-duty 1/4-inch steel for maximum structural integrity
• Drops the pivot point to achieve the ideal radius arm angle on 3.5-inch lifts
• Complete bolt-on installation requires no welding
• Finished in a durable black powdercoat to resist corrosion and road debris
• Designed to restore caster and improve highway tracking
• Manufacturer Part Number: CS-FRAD-LVL-2325

Fits 2014-2023 Ram 2500 4WD models (all trims including Power Wagon, Rebel, Tradesman, and Laramie).

The Carli Suspension Rear Track Bar Drop Bracket is the essential solution for re-centering the rear axle and restoring proper suspension geometry after installing a 1-2" lift. By lowering the mounting point of the factory track bar, this bracket corrects the tracking arc to minimize rear-end shift and ensure the axle remains centered under the frame during suspension travel.

Engineered for maximum durability, this bracket is fabricated from 1/4" cold rolled steel and finished in a resilient black powdercoat to withstand harsh road conditions. The kit includes high-strength Grade 8 mounting hardware for a secure, bolt-on installation that maintains factory-level reliability.

• Provides geometry correction for 1-2" rear lift heights
• Re-centers the rear axle for improved handling and tracking
• Heavy-duty 1/4" cold rolled steel construction
• Durable black powdercoat finish for corrosion resistance
• Complete with Grade 8 mounting hardware
• Manufacturer Part Number: CS-DPRBDROP-14-R

Fits 2003-2010 Dodge Ram 2500 and 3500 4WD trucks equipped with 6-inch lift systems.

The Carli Track Bar Drop Bracket is engineered to restore proper front-end geometry on heavily lifted Dodge Ram trucks. Increasing ride height by 6 inches significantly alters the operating angle of the track bar, which often leads to axle shift and steering feedback. This heavy-duty drop bracket lowers the frame-side mounting point, helping to keep the track bar in phase with the drag link to ensure predictable handling and minimized bump steer.

• Manufactured from 1/4-inch cold rolled steel for superior structural rigidity
• Durable black powdercoat finish for long-term corrosion resistance
• Includes high-strength Grade 8 mounting hardware for a secure installation
• Designed specifically for 6-inch suspension lift heights
• Manufacturer Part Number: CS-DATBDROP6-03

Detailed Fitment:

• 2003, 2005-2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, Sport, ST, SXT, TRX, TRX4)
• 2003-2010 Dodge Ram 3500 (Laramie, SLT, Sport, ST, SXT, TRX4)

Fits select 2019-2023 Ram 1500 4x4 models (Big Horn, Laramie, Limited, Rebel, Tradesman, TRX).

The Carli-SPEC Commuter shock package is engineered for owners seeking a controlled, smooth on-road ride with improved handling characteristics. This set levels the 2019-2023 Ram 1500 platform by providing approximately 2.5 inches of front lift height using precision-tuned 2.5-inch internal reservoir front coilovers. The rear suspension is upgraded with 2.0-inch internal reservoir shocks featuring durable aluminum bodies for superior heat dissipation and rubber shock boots to protect the shafts from debris.

• Front Lift: 2.5 inches (height may vary by trim such as Rebel or EcoDiesel)
• Front Shocks: 2.5-inch internal reservoir coilovers
• Rear Shocks: 2.0-inch internal reservoir aluminum body shocks
• Compatibility: Works with factory Ram upper control arms (UCAs)
• Installation Requirements: Requires Carli rear coils and sway bar end links (sold separately)
• Manufacturer Part Number: AS-RAM15SPKG-CS20IFP-B

Vehicle Fitment:

• 2019-2023 Ram 1500 Big Horn, HFE, Laramie, Limited, Lone Star, Rebel, Tradesman
• 2019-2021 Ram 1500 Laramie Longhorn
• 2021-2023 Ram 1500 Limited Longhorn, TRX
• 2021 Ram 1500 Longhorn, TRX Launch Edition
• 2020-2021 Ram 1500 Special Service

Fits 2010 Dodge Ram 2500 and 3500.

Carli Mild Steel Extended Control Arms are an essential upgrade for any leveled or lifted 4th Gen truck. Designed specifically for 3-inch suspension systems, these arms re-center the front axle to ensure proper suspension cycling and geometry. The arm centers are welded off-center to provide additional clearance for larger tires, preventing rub during articulation.

• Heavy-duty boxed construction with .120-inch wall mild steel for maximum strength
• High-strength 17-4 stainless steel spherical joints
• Greasable and rebuildable joints for long-term serviceability and ease of maintenance
• Superior durability compared to factory stamped-steel arms
• Direct replacement for OE components; part number CS-CA-MS-10

Fits 2005-2007 Ford F-250 and F-350 Super Duty.

Carli Front Brake Line Relocation Tabs offer an economical solution for correcting brake line fitment on vehicles equipped with basic leveling systems. These tabs relocate the factory brake line mounting points to provide the necessary slack for increased suspension travel, preventing tension on the OEM lines without requiring a full replacement.

• Designed to maintain safe brake line geometry on leveled trucks
• Heavy-duty construction with a durable black powdercoat finish
• Includes high-strength Grade 8 mounting hardware for a secure installation
• Cost-effective alternative to extended aftermarket brake lines
• Manufacturer Part Number: CS-FBLT-05

Fits select 2014-2024 Ram 2500 and 2013-2024 Ram 3500 (Multiple Trims).

The Carli Suspension Front Reservoir Mount is engineered specifically to provide a secure, vibration-resistant mounting solution for the 2.5-inch remote reservoirs included in the Carli Pathfinder Shock Package. These mounts ensure proper reservoir orientation and clearance, preventing interference with other suspension components while allowing for maximum cooling during heavy cycles.

• Designed specifically for the Carli Pathfinder Shock Package with 2.5" shock bodies
• Precision-engineered for heavy-duty Ram 2500 and 3500 chassis
• Ensures stable reservoir placement for consistent suspension performance
• Heavy-duty construction for off-road reliability
• Manufacturer Part Number: CS-DRM-14-CS25

Fits 2009-2010 Dodge Ram 1500 and 2011-2022 Ram 1500 models.

Correct your suspension geometry and restore wheel travel on your leveled Ram 1500 with Carli Fabricated Upper Control Arms. These UCAs are engineered to provide the necessary clearance and strength that factory stamped-steel arms lack, especially when paired with aftermarket leveling kits. Built from heavy-duty fabricated steel, these arms feature a 1-inch FK Uniball to replace the restrictive factory ball joint, offering significantly more articulation and durability in demanding conditions.

• Strong fabricated steel construction for maximum rigidity
• Corrected geometry specifically for leveled Ram 1500 suspension systems
• 1-inch FK Uniball with 17-4 stainless steel uniball pin
• Anodized aluminum cap protects the uniball from dirt and road debris
• Serviceable frame-side bushings with easily accessible grease fittings
• Durable black powdercoat finish for corrosion resistance
• Manufacturer Part Number: CS-RAM15UCA-09

Fits 2017-2022 Ford F-250 and F-350 Super Duty 4x4 Diesel models.

The Carli Signature Leveling System is a comprehensive suspension upgrade designed to level the stance and significantly improve the ride quality of your Ford Super Duty. This kit provides a 2.5-inch lift for F-250 models or a 3.5-inch lift for F-350 models, providing clearance for larger tires while enhancing off-road capability and on-road comfort.

The system features Carli’s custom-tuned Signature Series shocks, built for durability with a corrosion-resistant finish and backed by a limited lifetime warranty. To maintain proper suspension geometry, the kit includes an adjustable track bar to re-center the axle and caster correction shims to ensure factory-like steering feel and stability.

• Carli Signature Series front and rear shock package
• Linear rate front coil springs
• Adjustable track bar for precise axle alignment
• Caster correction shims
• Extended brake line kit
• Front bump stop drops
• Increases wheel travel to 9 inches front and 13 inches rear
• Manufacturer Part Number: CS-FLVL-SIG-17

Fits 2017-2022 Ford F-250 and F-350 Super Duty 4x4.

These Carli Upper Frame Brackets (CS-FLTB-23-UPR) provide a secure, heavy-duty mounting foundation for long-travel airbag systems on the Ford Super Duty platform. Designed to handle the increased articulation of modified suspension systems, these brackets ensure the air springs remain properly aligned throughout the full range of travel. This prevents binding and ensures consistent load support during heavy towing or hauling.

• Precision-engineered for Carli Long Travel Airbag kits
• Heavy-gauge steel construction for superior durability under stress
• Includes all necessary Grade 8 installation hardware
• Specifically designed for 4x4 Ford F-250 and F-350 frames
• Manufacturer Part Number: CS-FLTB-23-UPR

Fits select 1994-2013 Dodge and Ram 2500/3500 trucks with 2.75 inches of front lift. Carli Suspension Signature Series 2.0 Front Shocks are engineered to provide a significant improvement in ride quality and off-road capability for heavy-duty Ram platforms. These shocks are specifically tuned to deliver 10 inches of front wheel travel, allowing for better articulation and damping performance in varied terrain.

Built for long-term durability in harsh environments, each shock body features a zinc-plated finish and a protective clearcoat to resist corrosion. The included rubber shock boots shield the shafts from road debris, mud, and grit that can cause premature seal failure. These shocks utilize high-quality bushings for a direct fit into factory mounting locations.

• Provides 10" of front wheel travel
• Zinc-plated and clear-coated shock bodies for superior corrosion resistance
• Protective rubber boots included to shield shock shafts
• Includes application-specific bushings for secure mounting
• Manufacturer Part Number: CS-DSIG20FRONTSPKG-94
• Backed by Carli's Lifetime Warranty

Fits select 2013-2023 Ram 2500 and 3500 models.

Carli Dominator Front Lower Shock Mounts provide a critical reinforcement for heavy-duty Ram trucks. Designed to replace the thin factory mounts, these weld-on brackets are engineered to handle the increased leverage and dampening forces of high-performance suspension systems. They are a recommended upgrade for any owner running 2.5-inch or 3.0-inch diameter shocks or those who take their vehicle into aggressive off-road environments.

Constructed from boxed 1/4-inch steel, these mounts offer superior rigidity and durability compared to the OE stampings. The weld-in design ensures a permanent, high-strength connection to the axle housing, preventing the mount deflection or failure common with oversized shocks on stock hardware.

• Manufacturer Part Number: CS-DLSM-14-F
• Material: 1/4-inch steel
• Design: Fully boxed for maximum strength
• Installation: Weld-on
• Compatibility: Optimized for 2.5-inch and 3.0-inch shocks

Fits 2003-2009 Dodge Ram 2500 and 3500 4WD trucks, including Laramie, Power Wagon, SLT, Sport, ST, SXT, and TRX4 submodels.

Carli Mild Steel Extended Control Arms are a critical component for any 2003-2009 Ram 2500/3500 equipped with a 3-inch suspension system. These arms are engineered to re-center the front axle within the wheel well, correcting the geometry that is typically compromised when installing a leveling kit or lift. To better accommodate oversized tires, the arm centers are welded off-center, providing maximum clearance at full steering lock.

Constructed from heavy-duty .120-inch wall box mild steel, these arms offer a significant strength advantage over the thin factory stamped steel components. For long-term reliability and smooth suspension cycling, Carli utilizes 17-4 stainless steel spherical joints that are both fully greasable and rebuildable.

• Manufacturer Part Number: CS-CA-MS-03
• Re-centers axle on 3-inch suspension systems
• Heavy-duty .120" wall box mild steel construction
• 17-4 stainless steel spherical joints for durability
• Fully greasable and rebuildable joint design
• Off-center weld design for increased tire clearance

Fits 2014-2024 Ram 2500 Diesel models including Tradesman, Laramie, Power Wagon, and Rebel.

The Carli Pathfinder Series 2.5" shock system is engineered for owners who require the damping control and thermal stability of a 2.5" shock while maintaining optimized on-road comfort. Custom tuned for a 3.25" level height, these shocks provide a significant upgrade in cooling capability and off-road stability compared to smaller diameter options. The aluminum bodies offer superior heat dissipation and corrosion resistance over standard steel shocks.

• 2.5" Aluminum body reservoir shocks with gray hard-coat finish
• Custom tuned for 3.25" front lift height and optimal ride quality
• Compatible with Carli Full Progressive Leaf Springs or factory leaf packs
• Increased fluid capacity for improved cooling and fade resistance
• Enhanced towing stability and off-road control
• MPN: AS-D3SPKG-CS25RR-A

Note: This package includes shocks only; reservoir mounts are not included.

Fits select 1994-2022 Ram 2500/3500, 2005-2022 Ford Super Duty F-250/F-350, and 2000-2005 Ford Excursion.

Carli Suspension Short Reservoir Mounts (CS-SRM-25) are engineered to secure 2.5-inch diameter shock reservoirs in a compact, high-clearance position. These mounts are essential for enthusiasts running 37-inch tires, as they tuck the reservoir out of harm's way to ensure a full range of axle movement without interference or rubbing during heavy articulation. Built to withstand off-road abuse, these mounts provide a stable mounting point that protects your shock components from debris and suspension contact.

• Designed specifically for 2.5-inch diameter shock reservoirs
• Optimized for maximum clearance with upgraded 37-inch tire configurations
• Durable black powder-coated finish for superior corrosion resistance
• Includes high-quality hose clamps for a secure, professional installation
• Manufacturer Part Number: CS-SRM-25

Fits 2019-2023 Ram 1500 models including Big Horn, Laramie, Limited, Rebel, and Tradesman. These heavy-duty springs are engineered specifically for trucks carrying a constant bed load.

Carli Multi-Rate HD rear coil springs provide a significant upgrade for Ram 1500 owners who experience rear-end sag or a harsh ride due to permanent weight in the bed. By utilizing a multi-rate design, these springs maintain a supple initial stroke for daily driving comfort while providing the necessary support to keep the vehicle level and planted when loaded. This design eliminates the

Fits 2019-2023 Ram 1500 4x4 models including Big Horn, Laramie, Limited, Rebel, and Tradesman.

Carli Multi-Rate rear coil springs are engineered to improve the ride quality and handling of your 2019-2023 Ram 1500. By replacing the factory rear coils, these springs provide a consistent 1/2 inch of rear lift while delivering a more planted, controlled feel over varied terrain. The multi-rate design is specifically tuned to offer plush compliance over small bumps without sacrificing the stability needed for towing or hauling.

Built for durability in harsh under-chassis environments, these springs feature a heavy-duty black powdercoat finish to resist corrosion and road debris. Please note that these springs are designed for standard bed configurations and are not compatible with vehicles equipped with the multi-function tailgate or Rambox storage system.

• Provides 1/2 inch of rear lift height
• Multi-rate design for improved ride comfort and stability
• Durable black powdercoat finish
• Direct-fit replacement for factory rear coil springs
• Manufacturer Part Number: CS-RAM15MRC-19-R

Fits 2019-2023 Ram 1500 4x4 models including Rebel, Laramie, and Limited.

The Carli Front Braided Brake Line Kit for the 2019-2023 Ram 1500 is specifically engineered to address the brake line strain experienced when using extended travel coilovers. These lines provide the necessary length and durability for high-performance suspension systems, ensuring your braking system remains safe and functional throughout the full range of wheel travel.

Constructed with a triple-layer design, these lines feature a Teflon inner core for fluid compatibility, a Kevlar braid middle layer for structural integrity, and a stainless steel outer braid for superior protection against abrasion. This rigid construction eliminates the volumetric expansion found in factory rubber hoses, delivering a firm, consistent pedal feel and improved braking modulation.

• Fits 2019-2023 Ram 1500 4x4
• Pressure tested to 4,500 PSI
• Multi-layer construction: Teflon core, Kevlar middle, and Stainless Steel outer
• Eliminates spongy pedal feel by reducing line expansion
• Designed for trucks with extended travel suspension components
• Manufacturer Part Number: CS-RAM15BBL-19

Vehicle Fitment

Fits select 2011-2023 Ram 1500 models without factory air ride. Designed for vehicles equipped with 1" to 2" of rear lift.

Carli machined aluminum rear sway bar end links are engineered to correct the rear sway bar geometry on leveled or lifted trucks. By restoring the proper operating angle of the sway bar, these links prevent binding and ensure the rear suspension maintains its full range of motion. Each link is built for durability under heavy use, featuring machined aluminum bodies and forged ends for superior strength over factory components.

• Machined aluminum link bodies for high strength and corrosion resistance
• Forged ends to handle increased articulation and stress
• High-performance urethane bushings for improved stability and response
• Stainless steel crush sleeves to prevent hardware seizing and corrosion
• Includes Grade 8 mounting hardware
• Corrects geometry on systems with 1"-2" of rear lift
• Manufacturer Part Number: CS-RAM15-EL-R

Fits 2005-2023 Ford F-250 and F-350 Super Duty (All Trims).

Carli Suspension Signature Series 2.0” Rear Shocks are custom-tuned to provide a refined ride quality for Ford Super Duty owners. These nitrogen-charged shocks are specifically designed for trucks equipped with a 2.5-inch rear lift, offering a balanced damping profile that excels in daily driving scenarios while maintaining durability for light off-road use.

• Provides 12" of rear wheel travel for improved articulation and comfort.
• Durable clear-coated shock bodies protect against corrosion and road debris.
• High-quality rubber shock boots included to shield the piston rods.
• Manufacturer Part Number: CS-FSIG20SPKG-REAR-LVL-05
• Backed by Carli’s Limited Lifetime Warranty.

Includes a pair of rear shocks only.

Fits 2005-2023 Ford F-250 and F-350 Super Duty models with a 2.5 to 3.0-inch front lift.

Carli Suspension Signature Series 2.0” Front Shocks are specifically tuned for heavy-duty Ford trucks, delivering a compliant and comfortable ride quality optimized for daily driving. These shocks are designed to work with leveled or slightly lifted applications, providing a significant upgrade over factory dampening without the harshness often associated with performance shocks.

The shock bodies feature a durable clear-coat finish to resist corrosion, while the included rubber shock boots protect the shafts from road debris and environmental contaminants. Built to endure, these shocks provide 9 inches of front wheel travel to maintain contact and control across various road surfaces.

• Fits 2.5-inch to 3.0-inch front lift heights
• 9 inches of front wheel travel
• Clear-coated shock bodies for corrosion resistance
• Protective rubber shock boots included
• Tuned for daily driving comfort
• Carli Lifetime Warranty
• Sold as a pair (front only)
• Manufacturer Part Number: CS-FSIG20SPKG-F-LVL-05

Fits 2005-2026 Ford F-250 and F-350 Super Duty 4x4 models.

The Carli CS-FSHACKLE-11 Fabricated Leaf Spring Shackles are engineered to provide a significant improvement in ride quality over rigid factory units. By allowing the leaf spring to move more freely throughout its cycle, these shackles reduce rear-end harshness and improve overall suspension articulation. Designed as a direct-fit upgrade, they are fully compatible with both factory leaf springs and Carli performance leaf packs.

• Heavy-duty 1/4-inch fabricated steel construction for maximum durability
• Durable black powdercoat finish provides superior corrosion resistance
• Greasable and fully rebuildable design ensures long-term serviceability
• Improves suspension compliance compared to the restrictive factory shackle
• Compatible with OEM and Carli leaf spring assemblies
• Manufacturer Part Number: CS-FSHACKLE-11

Fits 2017-2026 Ford F-250 and F-350 Super Duty 4x4 models.

Restore proper suspension geometry on your lifted Ford Super Duty with Carli Suspension Sway Bar Frame Drop Brackets. When installing a 2.5-inch or 3.5-inch front lift, the factory sway bar angle is compromised, which can lead to binding and poor handling. These brackets lower the sway bar mounting points on the frame to bring the bar back into its optimal operating range.

Built for durability in demanding environments, these brackets feature a heavy-duty fabricated steel design. The kit is a direct bolt-in solution that requires no permanent modifications and includes high-strength Grade 8 hardware for a secure installation.

• Specifically designed for 2.5" and 3.5" front lift heights
• Restores factory sway bar geometry and improves ride quality
• Heavy-duty fabricated steel construction
• Direct bolt-on installation to factory mounting points
• Includes high-strength Grade 8 mounting hardware
• Manufacturer Part Number: CS-FSBD-LVL-1723

Fits 2017-2024 Ford F-250 and F-350 Super Duty 4x4 models (King Ranch, Lariat, Limited, Platinum, XL, XLT).

Engineered for use with Carli Dominator systems, this weld-in rear shock mount pair addresses the limitations of the factory Ford chassis. The original single-shear, pin-style mount is prone to failure when subjected to the high-bypass forces of large-diameter racing shocks. These mounts provide a massive strength increase, allowing you to run 3.0-inch diameter shocks in the factory location while maintaining structural integrity during off-road use.

• Designed specifically for King 3.0-inch shocks; will NOT work with factory-style shocks
• Robust weld-in design replaces the weak single-shear OE pin mounts
• Engineered for high-stress off-road applications and Dominator series kits
• Includes flag bolts for easier shock installation
• Requires professional welding for secure attachment to the frame
• Manufacturer Part Number: CS-FRSM-1723