Fits 2005-2022 Ford F-250 and F-350 Super Duty 4x4 trucks equipped with 4.5-inch to 5.5-inch suspension lifts.

Carli Fabricated Radius Arms (CS-FARA-45-05) are a heavy-duty replacement for the weak, stamped factory arms that often struggle with increased suspension cycles and off-road stress. Engineered for durability and geometry correction, these arms are constructed from 3/16-inch thick fully boxed plate steel with internal gusseting and robust cross-bracing. This rigid design eliminates the flex found in OEM components, providing tighter steering response and a more controlled ride.

The axle-end connection features a rebuildable 17-4 stainless steel spherical joint. Unlike factory rubber bushings that wind up and release energy—creating a noticeable "kinetic kick" during suspension travel—this spherical joint allows for bind-free articulation and smoother cycling. Additionally, the arms are designed with a specific profile to provide an extra 1/2-inch of tire clearance, accommodating larger wheel and tire packages without rubbing.

• Fits 2005-2022 Ford F-250/F-350 Super Duty 4x4 models
• Engineered for 4.5-inch to 5.5-inch lift heights
• Built from 3/16-inch boxed plate steel with internal gussets
• Provides 0.5° to 2.5° of adjustable caster correction
• Includes 12-inch quad-wrap limit strap kit to prevent shock over-travel
• 17-4 stainless steel rebuildable spherical joints for bind-free movement
• Manufacturer Part Number: CS-FARA-45-05

Fits select 2005-2024 Ford F-250 and F-350 Super Duty models.

The Carli Pathfinder Series 2.5 shock system is engineered for the Super Duty owner who requires the increased control and heat capacity of a 2.5-inch diameter shock without compromising on-road comfort. These custom-tuned shocks deliver a significant upgrade over factory damping, offering superior cooling capability and consistent performance during heavy towing or off-road use. Each shock features a hard-coat anodized aluminum body, providing enhanced thermal efficiency and corrosion resistance compared to traditional steel-body shocks.

• Large 2.5-inch aluminum bodies for maximum heat dissipation and durability
• Custom-tuned specifically for Ford Super Duty platforms to optimize ride quality
• Compatible with Carli Full Progressive Leaf Springs or factory rear leaf packs
• Gray hard-coat finish protects against debris and harsh environmental conditions
• Remote reservoirs included to increase oil volume and prevent damping fade
• Includes all necessary reservoir mounting hardware for a complete installation
• Manufacturer Part Number: CS-F45SPKG-CS25RR-A

Fits 1994-2013 Dodge Ram 2500 and 3500 trucks (Select submodels) equipped with 2.75 inches of front lift.

Carli Suspension Signature Series 2.0 shocks are engineered to provide a significant upgrade in ride quality for daily driving and light off-road use without the cost of high-end reservoir shocks. These dampers are custom-tuned to manage the heavy solid axles of the Ram platform, smoothing out road chatter and highway expansion joints. The shock bodies feature a clear-coated finish for corrosion resistance and are paired with durable rubber boots to protect the shafts from debris and road salt.

• Manufacturer Part Number: CS-DSIG20SPKG-94
• Shock Body Diameter: 2.0 inches
• Front Wheel Travel: 10 inches
• Rear Wheel Travel: 12 inches
• Finish: Clear coated for weather protection
• Includes: Front and rear shock absorbers with rubber boots
• Warranty: Backed by Carli's Limited Lifetime Warranty

Fits select 2003-2024 Dodge Ram 2500 and Ram 3500 4x4 models.

Carli Fabricated Leaf Spring Shackles are engineered as a direct replacement for factory hardware to provide immediate ride quality improvements. By allowing the leaf spring to cycle more freely than the restrictive OE shackles, this upgrade reduces rear suspension harshness during daily driving and off-road use.

• Rugged Construction: Manufactured from 1/4-inch fabricated steel for superior strength and durability compared to stamped factory alternatives.
• Serviceable Design: Features a greasable and rebuildable design, ensuring a long service life and easy maintenance.
• Corrosion Protection: Finished in a durable black powdercoat to resist salt, debris, and the elements.
• Dual Compatibility: Designed to fit perfectly with both factory leaf springs and Carli aftermarket leaf spring packs.
• Manufacturer Part Number: CS-DSHACKLE-0313

Fits select 2013-2023 Ram 2500 and 3500 4x4 models with a 3-inch suspension lift.

The Carli CS-DSBD-14 Sway Bar Drop Brackets are engineered to correct sway bar geometry on heavy-duty Ram trucks equipped with 3 inches of lift. Lifting your truck shifts the factory sway bar out of its optimal operating range; these brackets drop the mounting points to restore the correct angle, ensuring consistent stability and preventing binding during suspension cycling.

• Specifically designed for vehicles with 3-inch lift heights
• Precision in-house machined from high-quality billet aluminum
• Hard-anodized finish provides a durable, corrosion-resistant protective layer
• Maintains factory sway bar geometry for improved handling and control
• Direct-fit installation for Ram 2500 (2014-2023) and Ram 3500 (2013-2023) 4x4 models
• Manufacturer Part Number: CS-DSBD-14

Fits 2013-2025 Ram 3500 4x4 models.

Carli Front Shock Reservoir Mounts (CS-DRM-14-25) provide a secure, high-clearance mounting solution for 2.5-inch diameter shock reservoirs. By positioning the reservoir above the tire, these mounts protect sensitive components from road debris and off-road hazards while ensuring they remain clear of suspension travel. The brackets are designed to install precisely between the factory coil bucket and the spring isolator for a robust, rattle-free fitment.

• Specifically engineered for 2.5-inch diameter reservoirs
• Mounts securely between the coil bucket and spring isolator
• Positions reservoirs out of harm's way above the front tire
• Includes corrosion-resistant stainless steel hose clamps
• Manufacturer Part Number: CS-DRM-14-25

Fits 2013-2025 Ram 3500 trucks including Big Horn, Laramie, Limited, SLT, and Tradesman models.

Carli 2.0 Reservoir Mounts provide a robust and secure solution for mounting shock reservoirs above the tire, keeping sensitive components out of harm's way and protected from road debris. These mounts are designed to seat precisely between the factory coil bucket and the spring isolator, ensuring a clean and professional installation that maintains reservoir accessibility for tuning or inspection.

• Designed specifically for 2.0" diameter shock reservoirs
• Mounts securely between the factory coil bucket and spring isolator
• Keeps reservoirs protected and elevated above the tire
• Includes durable stainless steel hose clamps for a secure fit
• Manufacturer Part Number: CS-DRM-14-20

Fits select 2014-2023 Ram 2500 models including Power Wagon, Rebel, Laramie, and Tradesman.

Carli Rear Bump Stop Drops provide essential suspension height correction for 2014-2023 Ram 2500 trucks equipped with 1" to 2" of rear lift. By relocating the factory bump stops, these drops ensure proper engagement during compression, protecting your shocks and suspension components from over-travel damage. CNC-machined from billet aluminum, these spacers are engineered to withstand heavy off-road use while maintaining a clean, professional appearance under the chassis.

• Corrects bump stop height for 1-2" rear lifts
• CNC-machined billet aluminum construction for maximum durability
• Corrosion-resistant black anodized finish
• Simple bolt-in installation to factory mounting points
• Includes high-strength Grade 8 installation hardware
• Manufacturer Part Number: CS-DRBD-AL

Fits select 2013-2023 Ram 2500 and 3500 trucks (2WD/4WD depending on configuration).

The Carli Radius Arm Drop Brackets (CS-DRAD-14) are essential for maintaining proper suspension geometry on late-model Ram heavy-duty trucks. Specifically engineered for lift heights ranging from 2.5 to 4.5 inches, these brackets drop the radius arm mounting point to restore factory-like caster settings. Correcting this geometry is critical for eliminating the

Fits 2014-2024 Ram 2500 Power Wagon.

Carli lift systems for Radius-Arm equipped Power Wagons utilize long-travel rear springs and shocks to significantly increase suspension articulation. Since the factory bump stop location is maintained, this extra travel occurs during the extension (droop) side of the stroke. Under full droop, the additional angle can cause the rear driveshaft to contact the factory underbelly skid plate.

This drop bracket repositions the factory skid plate to provide the necessary clearance for the driveshaft, ensuring your suspension can reach its full range of motion without interference. This is a critical component for any 2014-2024 Power Wagon running a Carli extended-travel system.

• Prevents rear driveshaft contact with factory underbelly skid
• Designed specifically for Carli Suspension extended travel systems
• Durable black powdercoat finish for long-term corrosion resistance
• Direct bolt-in fitment using factory mounting points
• Manufacturer Part Number: CS-DPWSKIDBLK-14

Fits select 2003-2010 Dodge Ram 2500 and 3500 4x4 (Diesel).

The Carli Progressive Add-A-Pack is engineered to enhance rear ride quality without sacrificing your truck's load-carrying capacity. By replacing the factory lower overload spring with a progressive leaf pack, this system improves predictability on rough terrain and ensures tires stay firmly planted. This kit provides 1" of rear lift, making it an ideal solution for leveling vehicles equipped with 3" front suspension systems.

• Specifically tuned for 2003-2010 Dodge Ram 2500/3500 4x4 Diesel applications
• Provides 1" of rear lift to match 3" front leveling/lift kits
• Replaces the harsh factory lower overload spring
• Includes heavy-duty U-bolts and centering pins for complete installation
• Improves suspension cycle predictability and ride comfort
• Manufacturer Part Number: CS-DPAP-03-D

Fits 2003-2010 Dodge Ram 2500 and 3500 Diesel models.

Carli 6-inch Multi-Rate Front Coil Springs are engineered to deliver a refined ride for heavy-duty trucks. These custom-wound springs utilize a multi-rate design to provide a smooth, compliant feel over small road chatter while maintaining the necessary bottom-out resistance for larger impacts. They are a direct component for a full Carli 6-inch suspension system and serve as a high-performance upgrade for any Dodge Ram truck already equipped with a 6-inch lift.

• 6-inch front lift height
• Custom-wound multi-rate design for improved ride quality and control
• Shot-peened and pre-set construction to ensure maximum fatigue life and prevent sagging
• Finished in a durable black powder coat for long-lasting corrosion resistance
• Specifically tuned for the weight and requirements of Diesel powertrain models
• Manufacturer Part Number: CS-DMRC6-03-D

Fits 2014-2023 Ram 2500 trucks (including Power Wagon, Rebel, Tradesman, Laramie, and Limited models). These Carli CS-DMRC-14-R2 Multi-Rate Rear Coil Springs are designed to improve ride quality and increase suspension travel without sacrificing your truck's factory payload capacity.

By utilizing a multi-rate design, these springs provide a supple feel over small road chatter while offering the support needed for heavy-duty hauling. They provide approximately 2 to 3 inches of rear lift, depending on your specific truck configuration. For optimal geometry and performance, Carli recommends pairing these springs with extended rear sway bar end links (CS-DEL-R-14) and a rear track bar drop bracket (CS-DPRBDROP-14-R).

• Fits 2014-2023 Ram 2500 models
• Provides 2-3 inches of rear lift depending on configuration
• Multi-rate design for superior ride quality and suspension travel
• Maintains full factory payload capacity
• Durable black powdercoat finish
• Load tested to 2,500 lbs
• Manufacturer Part Number: CS-DMRC-14-R2

Fits 2014-2023 Ram 2500 4x4 models including Power Wagon, Tradesman, Laramie, and Limited.

Improve your heavy-duty truck's ride quality and handling with Carli Suspension multi-rate rear coil springs. Designed specifically for the 2014-2023 Ram 2500, these springs provide 1/2 inch to 1 inch of rear lift depending on your vehicle's bed configuration. The multi-rate design delivers a more compliant ride over small bumps and road chatter while maintaining the structural integrity required for towing and hauling.

Constructed for durability and performance, these coils are payload tested to 1,500 lbs and finished in a resilient black powdercoat to resist corrosion and road debris. For proper suspension geometry and performance, Carli recommends pairing these springs with extended rear sway bar end links (CS-DEL-R-14) and a rear track bar drop bracket (CS-DPRBDROP-14-R).

• Provides 0.5" to 1.0" of rear lift
• Multi-rate coil design for optimized control
• Payload tested to 1,500 lbs
• Durable black powdercoat finish
• Direct fit for 2014-2023 Ram 2500 4x4 models
• Manufacturer Part Number: CS-DMRC-14-R1

Fits 1994-2013 Dodge and Ram 2500/3500 models equipped with the HEMI gas engine. These Carli Suspension multi-rate coil springs are engineered to improve front-end ride quality while providing approximately 2.75 to 3 inches of lift, depending on your vehicle's cab configuration.

Constructed with a custom-wind multi-rate design, these springs offer a compliant feel over small chatter while maintaining the necessary support for larger impacts and increased suspension travel. Each spring undergoes a shot-peening process and is pre-set to ensure long-term resistance to sagging. The coils are finished in a durable black powder coat for superior corrosion resistance in harsh environments.

• Fits 1994-2013 Dodge/Ram 2500 and 2003-2012 Ram 3500
• Lift Height: 2.75" to 3" (application dependent)
• Spring Design: Custom-wind multi-rate
• Finish: Durable black powder coat
• Process: Shot-peened and pre-set for durability
• Manufacturer Part Number: CS-DMRC-03-H

Fits 2003-2009 Dodge Ram 2500 and 3500 (Diesel).

Carli CS-DMRC-03-D front coil springs are engineered to solve the harsh ride characteristics and sagging common with factory and standard aftermarket springs. These custom-wound multi-rate coils provide a more compliant ride across varying terrain by using multiple spring rates in a single coil. This ensures a supple feel during daily driving while providing the necessary resistance to handle large bumps and off-road impacts.

Built for long-term durability, each coil undergoes a shot-peening process to increase fatigue resistance and is pre-set to prevent height loss over time. The springs provide approximately 2.75 to 3 inches of lift, depending on your vehicle's cab configuration, effectively leveling the front end of your heavy-duty Ram truck.

• Fits 2003-2009 Dodge Ram 2500/3500 Diesel models
• Provides 2.75" to 3" of front lift height
• Multi-rate design for optimized ride quality and suspension travel
• Shot-peened and pre-set to ensure maximum strength and sag resistance
• Durable black powdercoat finish for corrosion protection
• Manufacturer Part Number: CS-DMRC-03-D

Fits select 2013-2023 Ram 3500 and 2014-2023 Ram 2500 4x4 Diesel models. These Carli Suspension front coil springs provide a 2.5-inch lift, correcting the factory nose-down stance while significantly improving ride quality over both stock and generic aftermarket springs.

Engineered for heavy-duty applications, these linear-rate coils utilize a slightly reduced spring rate compared to OEM to enhance small-bump compliance without sacrificing load-carrying stability. To ensure long-term performance and prevent sagging, every coil is shot-peened and pre-set during manufacturing. This process relieves internal stresses and guarantees the spring will maintain its specified height even under demanding off-road use.

• Lift Height: 2.5 inches
• Spring Type: Linear Rate
• Construction: Shot-peened and pre-set for maximum durability
• Finish: Durable black powdercoat for corrosion resistance
• Quantity: Sold as a pair
• Manufacturer Part Number: CS-DLRC-14-LVL-D

These springs are a direct replacement for the factory front coils, mounting into the original spring buckets for a straightforward installation that provides an aggressive, leveled appearance and improved suspension cycling.

Fits 2013-2023 Ram 2500 4x4 models equipped with the HEMI gas engine.

Carli linear-rate front coil springs are engineered specifically to address the lighter front-end weight of gas-powered Ram trucks compared to their diesel counterparts. By calibrating the spring rate for the HEMI engine, these coils provide a significant improvement in ride quality and off-road performance without the harshness often found in heavy-duty diesel springs. On standard Ram 2500 models, these springs provide 3" to 3.5" of front lift; on Power Wagon models, they provide 1" of front lift to level the stance.

• Fits 2013-2023 Ram 2500 (HEMI gas models)
• 3.0" to 3.5" front lift (1.0" lift for Power Wagon models)
• Linear rate design for consistent handling and predictable compression
• Finished in a durable black powdercoat for long-term corrosion resistance
• Specifically tuned for gas engine weight distribution
• Manufacturer Part Number: CS-DLRC-14-H

Fits select 2013-2023 Ram 2500 and 3500 4x4 trucks equipped with the Diesel engine.

Carli Front Coil Springs are engineered to provide 3.0" to 3.5" of front lift while significantly improving ride quality over factory components. These springs utilize a slightly reduced linear rate compared to stock, which softens the initial impact and provides better suspension travel both on the highway and in off-road environments. Unlike progressive springs, the linear rate ensures consistent handling characteristics throughout the stroke.

Built for long-term performance, each coil spring is shot peened and pre-set to ensure maximum strength and prevent sagging over time, even under the heavy front-end load of a diesel engine. The springs are finished in a durable black powdercoat for superior corrosion resistance.

• Manufacturer Part Number: CS-DLRC-14-D
• Lift Height: 3.0" - 3.5" (model dependent)
• Spring Rate: Linear
• Finish: Black Powdercoat
• Construction: Shot peened and pre-set steel
• Fitment: 2014-2023 Ram 2500 4x4 Diesel / 2013-2023 Ram 3500 4x4 Diesel

Fits select 2003-2010 Dodge Ram 2500 and 3500 Diesel models.

Carli Suspension linear rate coil springs are engineered to improve ride quality and suspension travel for heavy-duty Ram trucks. Unlike factory springs that can feel harsh over small bumps, these custom-wound coils provide a smooth, comfortable ride while maintaining the support needed for diesel applications. Each spring is shot-peened and pre-set to ensure long-term durability and resistance to sagging, even under the constant weight of a Cummins powerplant.

• Provides 2.75" to 3" of front lift height depending on cab configuration
• Custom-wound linear rate design for consistent handling and comfort
• Shot-peened and pre-set construction for maximum fatigue resistance
• Finished in a durable black powder coat for superior corrosion protection
• Specifically tuned for heavy-duty Diesel front-end weights
• Manufacturer Part Number: CS-DLRC-10-D

Fits 2003-2008 Dodge Ram 2500 and 3500 4WD models with Y-style steering systems.

The Carli CS-DLMSS-Y Low-Mount Steering Stabilizer is engineered to solve front-end instability and correct radial tire pull. Featuring a proprietary nitrogen chamber, this shock is adjustable from 70 psi to 200 psi, allowing you to fine-tune the internal pressure to counteract pulling caused by various tire configurations or road crowns. It serves as a critical component in the comprehensive Dodge "Death Wobble" solution, providing significantly more damping than the factory unit.

Built to withstand harsh environments, this stabilizer features a corrosion-resistant stainless steel body, a hardened black nitride shaft, and machined billet aluminum rod ends. The use of precision 1/2-inch spherical bearings ensures smooth articulation and eliminates the deflection common with stock rubber bushings. The entire unit is fully rebuildable, ensuring long-term serviceability for your heavy-duty truck.

• Adjustable nitrogen pressure (70 psi to 200 psi) to correct for radial tire pull
• Corrosion-resistant stainless steel shock body with custom valving profile
• Hardened black nitride shaft and machined billet aluminum rod ends
• Precision 1/2-inch spherical bearings for rigid, responsive steering
• Fully rebuildable design for extended service life
• Designed specifically for Dodge Y-style steering linkages
• Manufacturer Part Number: CS-DLMSS-Y

Fits select 2003-2010 Dodge Ram 2500 and 3500 trucks equipped with T-style steering systems.

The Carli Low-Mount Steering Stabilizer (CS-DLMSS-T) is engineered to solve the common issue of radial tire-pull in heavy-duty Dodge trucks. Featuring a proprietary nitrogen chamber, this shock is externally adjustable from 70psi to 200psi, allowing you to fine-tune the internal pressure to counteract the directional pull of various tire tread patterns and wheel offsets.

Built for longevity in harsh environments, the unit features a 304 stainless steel body that is fully rebuildable. The internal components include a hardened black nitride shaft for superior wear resistance, while the exterior is finished with machined billet aluminum rod ends housing 1/2-inch precision spherical bearings for smooth, bind-free operation.

• Externally adjustable nitrogen pressure: 70psi to 200psi
• Corrects for radial tire-pull on heavy-duty applications
• 304 stainless steel shock body
• Hardened black nitride shock shaft
• Machined billet aluminum rod ends
• Precision 1/2-inch spherical bearings
• Designed specifically for T-style steering systems
• Fully rebuildable design
• Manufacturer Part Number: CS-DLMSS-T

Fits select 2013-2023 Ram 2500 and 3500 4WD trucks.

The Carli Suspension low-mount steering stabilizer is engineered to correct radial tire pull and improve front-end damping on heavy-duty Ram platforms. Unlike standard shocks, this unit features a proprietary nitrogen chamber adjustable from 70psi to 200psi, allowing owners to fine-tune the internal pressure to counteract the specific pull characteristics of their tire setup. Built for longevity in harsh environments, the stabilizer utilizes a corrosion-resistant stainless-steel body and a hardened black nitride shaft.

This fully rebuildable unit replaces the factory stabilizer using precision 1/2-inch spherical bearings and machined billet aluminum rod ends to eliminate the deflection common in rubber-bushed OEM components. Each shock is custom-valved specifically for steering stabilization to provide a firm, controlled feel without increasing steering effort.

• Manufacturer Part Number: CS-DLMSS-14
• Adjustable nitrogen pressure: 70psi to 200psi
• Corrosion-resistant stainless-steel shock body
• Hardened black nitride shaft for superior wear resistance
• Machined billet aluminum rod ends with 1/2-inch spherical bearings
• Fully rebuildable internal design

Fits select 2013-2023 Ram 2500 and 3500 4x4 models.

The Carli Front Differential Guard provides essential protection for your truck's ring gear during off-road use. Designed to shield the axle from direct impacts with rocks and trail obstacles, this heavy-duty guard helps prevent costly housing damage and gear failure. It features a low-profile design that maintains ground clearance while adding a layer of 1/4-inch thick armor to the front differential.

• Manufactured from 1/4-inch cold-rolled steel for high-impact durability
• Includes Grade 8 mounting hardware for maximum shear strength and reliability
• Direct bolt-on installation requires no welding or permanent modifications
• Protects the factory ring gear and differential cover from puncture or deflection
• Manufacturer Part Number: CS-DFDG-14

Fits 2003-2010 Dodge Ram 2500 and 3500 (5.7L / 5.9L / 6.7L).

The Carli Suspension CS-DFBD-1 front bump stop drop is a critical component for maintaining proper suspension geometry and preventing component damage on lifted applications. This 1-inch spacer effectively lowers the factory bump stop mounting point to compensate for the increased ride height of Carli 3-inch systems. By limiting upward travel, it prevents the coil springs from binding and protects the shock absorbers from bottoming out during heavy compression.

Constructed from machined aluminum for high-tolerance fitment and durability, these spacers feature a black anodized finish for corrosion resistance in harsh underbody environments. The simple bolt-in design allows for a straightforward installation without the need for welding or specialized fabrication.

• Precision machined aluminum construction
• Lowers factory bump stops by 1 inch
• Direct bolt-on installation; no welding required
• Corrosion-resistant black anodized finish
• Essential for Carli 3" suspension systems
• Manufacturer Part Number: CS-DFBD-1

Fits select 2014-2023 Ram 2500 4x4 models (including Power Wagon, Tradesman, and Laramie) equipped with 1-2 inches of rear lift.

Carli extended rear sway bar links are engineered to return the rear sway bar to its factory alignment and operating angle after the installation of a rear lift. Correcting this geometry prevents the sway bar from binding or contacting other suspension components, ensuring predictable handling and full suspension travel.

Built for durability in off-road environments, these links feature robust machined aluminum construction and forged ends. The assembly utilizes high-performance urethane bushings and stainless steel crush sleeves to resist corrosion and maintain tight tolerances over time.

• Fits 2014-2023 Ram 2500 4x4 with 1"-2" rear lift
• Returns rear sway bar to factory alignment
• Heavy-duty machined aluminum construction
• Forged ends with durable urethane bushings
• Corrosion-resistant stainless steel crush sleeves
• Includes Grade 8 mounting hardware
• Manufacturer Part Number: CS-DEL-R-14

Fits 1998-2009 Dodge Ram 2500 and 3500 4WD trucks.

Carli Suspension extended sway bar end links are engineered to correct sway bar geometry on trucks equipped with 0 to 3 inches of front-end lift. By restoring the proper operating angle of the sway bar, these links prevent binding and ensure the suspension cycles smoothly through its full range of travel. These are a heavy-duty replacement for factory links that often fail or reach their limit on leveled or lifted applications.

Each link is precision machined from 17-4 stainless steel for maximum corrosion resistance and structural integrity. For superior articulation, Carli utilizes 1/2-inch FK chromoly rod ends, which provide a significantly longer service life and better performance than standard rubber or polyurethane bushings. The package includes all necessary Grade 8 hardware for a secure, bolt-on installation.

• Manufacturer Part Number: CS-DEL-985
• Compatible with 0-3" front lift heights
• Material: Machined 17-4 stainless steel
• Joints: 1/2" FK chromoly rod ends
• Hardware: Grade 8 mounting bolts included

Fits select 2013-2023 Ram 2500 and 3500 heavy-duty trucks. Carli Dominator Coil Retainers provide a permanent, heavy-duty solution for the insufficient support provided by the factory coil buckets. These supports ensure your coils remain properly seated and aligned, even during demanding suspension cycles.

Precision machined from a solid piece of mild steel, these supports are designed for a weld-in installation, creating a robust mounting point that won't shift or fail. This is a critical upgrade for owners seeking to eliminate coil displacement issues common with high-performance off-road use.

• Fits 2013-2023 Ram 2500 and 3500 models
• Machined from solid mild steel for maximum durability
• Permanent weld-in installation design
• Requires standard OEM coil isolators for proper fitment
• Note: NOT compatible with Power Wagon-specific isolators
• Manufacturer Part Number: CS-DD30-14-COILRETAINER

Fits 2020-2022 Ram 2500 and 3500 heavy-duty trucks.

The Carli Transmission Crossmember Extended Hardware Kit (CS-DCM-20-HK) is a mandatory component for the proper installation of Carli Radius Arm Drop Brackets. When correcting suspension geometry on late-model Ram trucks, the factory crossmember hardware is often insufficient. This kit provides high-strength, extended-length fasteners to ensure the transmission crossmember is securely anchored to the frame after the drop brackets are in place.

• Required for Carli Radius Arm Drop Bracket installation
• Replaces factory hardware with extended-length fasteners
• High-strength bolts and nuts for secure crossmember mounting
• Manufacturer Part Number: CS-DCM-20-HK
• Kit includes: (4) Extended Bolts and (4) Matching Nuts

Vehicle Fitment:

Fits select 2003-2010 Dodge Ram 2500 and 3500 4WD models. This complete Carli Extreme-Duty Ball Joint Package (CS-DBJP-03) replaces the failure-prone factory ball joints with a robust, rebuildable solution designed to handle the lateral loads and weight of heavy-duty Ram trucks.

Carli's upper ball joints utilize a unique design where the pin contacts the housing at the "hat," creating a secondary wear surface to better distribute lateral forces. The lower joints feature a spherical design with a bronze wear surface preloaded by a disc spring, ensuring tight tolerances throughout the steering cycle. To maximize longevity, the joints undergo a specialized carburizing process using copper masking to achieve a case-hardness depth of 0.020"-0.025" on wear surfaces, while the exterior is protected by a gray corrosion-resistant coating and Viton seals.

• Carburized and heat-treated wear surfaces for extreme durability
• Recessed, angled grease fittings for easy maintenance and protection
• Upper ball joints eliminate the weak isolation sleeve found in OE units
• Lower ball joints feature a bronze wear surface and disc spring preload
• Gray corrosion-resistant finish with Viton environmental seals
• Includes 2 upper ball joints, 2 lower ball joints, installation tool, and Redline CV2 grease
• Manufacturer Part Number: CS-DBJP-03
• Limited Lifetime Warranty