Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including 4xe, Rubicon 392, Sahara, Sport, and Willys.

The DV8 Offroad FS-15 Series Rear Bumper (RBJL-11) is engineered for aggressive rock crawling where clearance is critical. Featuring a low-profile, high-clearance design, this bumper maximizes departure angles while providing robust protection. It is a direct-fit, bolt-on upgrade that maintains your Jeep’s utility by remaining fully compatible with the factory hitch and wiring harness.

For vehicles equipped with parking sensors, the FS-15 includes precision cutouts to retain full electronic functionality; for those without sensors, included plugs ensure a finished look. The bumper also accommodates up to a 37-inch spare tire on the factory carrier. To ensure legal compliance after installation, a license plate relocation bracket and integrated LED light are included in the box.

• High-clearance design optimized for off-road obstacles and rock crawling.
• Durable steel construction with a micro-texture black powder coat finish.
• Includes (2) 1-inch thick D-ring mounts designed for 7/8-inch shackle pins.
• Integrated sensor cutouts and hole plugs for a clean, factory-integrated look.
• Welded-in zip tie tabs for secure and organized wire management.
• Includes license plate relocation bracket and license plate light.
• Compatible with factory trailer hitch and spare tires up to 37 inches.
• Manufacturer Part Number: RBJL-11

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including Sport, Sahara, Rubicon, and 4xe trim levels.

The DV8 Offroad Spec Series Rear Bumper is engineered for dedicated rock crawling and technical trail use. This ultra-low profile design maximizes departure angles and provides essential rear-end protection without the bulk of a full-width bumper. Constructed for durability, it features a micro-texture black powder coat finish complemented by a satin black accent panel for a refined, multi-faceted look.

This bumper is a direct bolt-on solution that maintains factory utility by retaining backup sensor functionality. For recovery and visibility, it includes two integrated clevis mounts for D-ring shackles and mounting points for two 3-inch light pods to provide supplemental trail lighting. To ensure a clean install, the bumper features welded-in zip tie tabs for professional wire management.

• High clearance design for aggressive rock crawling
• Accepts (2) 3-inch pod lights for supplemental lighting
• Integrated clevis mounts for D-ring recovery shackles
• Retains factory backup sensor functionality
• Micro-texture black powder coat with satin black accent panel
• Includes license plate relocation bracket and plate light
• Direct-fit bolt-on installation
• Manufacturer Part Number: RBJL-09

Fits 2019-2025 Ram 2500 and 3500 heavy-duty trucks across various trims including Tradesman, Big Horn, Laramie, Limited, and Power Wagon.

The DV8 Offroad Spec Series Rear Bumper provides a full-width protective solution for the 2019-2025 Ram HD platform. Engineered for versatility, this bumper is compatible with both single and dual-tip exhaust configurations and maintains full functionality of the factory hitch. The bolt-on design installs without the need for cutting or permanent vehicle modification, utilizing factory mounting points for a secure fit.

Constructed with integrated mounts for two 3-inch pod lights, this bumper enhances rear-facing illumination for work or trail use. It supports both 4- and 6-sensor parking systems and reuses the factory license plate lights. To simplify installation on sensor-equipped trucks, DV8 recommends using their MPRSNSR-01 sensor bezels. The exterior is finished in a durable micro-texture black powder coat with satin black aluminum accent plates for added corrosion resistance and a clean, technical aesthetic.

• Manufacturer Part Number: RBDR2-05
• Direct bolt-on installation; no cutting required
• Accommodates (2) 3-inch pod lights for auxiliary lighting
• Compatible with factory parking sensors and license plate lights
• Welded-in zip tie tabs for clean wiring management
• Durable micro-texture black powder coat finish with aluminum accents
• Fits models with single or dual-tip exhaust

Fits select 2020-2023 Chevrolet Silverado 2500 HD and GMC Sierra 3500 HD models.

The DV8 Offroad Spec Series Rear Bumper (RBCS2-03) provides a rugged, full-width protection solution for heavy-duty trucks without sacrificing modern factory features. Engineered for a direct bolt-on installation with no cutting required, this bumper maintains full compatibility with your OEM parking sensors, license plate lights, and factory receiver hitch. It is specifically designed to accommodate Blind Spot Monitoring (BSM) systems and includes block-off plates for vehicles not equipped with sensors.

This bumper is finished in a durable micro-texture black powder coat and features satin black aluminum accent plates for a clean, technical look. For improved visibility on the trail, the design includes mounting provisions for two 3-inch rear-facing pod lights and integrated welded-in zip tie tabs for secure, professional wire management.

• Full-width design for maximum rear-end coverage and off-road protection
• Direct bolt-on installation utilizing factory mounting points
• Mounting provisions for (2) 3-inch rear-facing LED pod lights
• Fully compatible with factory hitch, parking sensors, and BSM functionality
• Micro-texture black powder coat finish with satin black aluminum accents
• Includes BSM block-off plates and welded zip tie tabs for wire management
• Manufacturer Part Number: RBCS2-03

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The DV8 Offroad RBCS1-04 is a low-profile, lightweight prerunner-style tube rear bumper designed to enhance your truck's off-road clearance without sacrificing factory features. This direct-fit, bolt-on bumper integrates seamlessly with your vehicle by utilizing the factory license plate lights and parking sensors. Constructed with a sleek tube-based design and finished in a durable micro-texture black powder coat, it provides a rugged yet refined appearance.

For added utility, this bumper includes integrated mounts for two 3-inch pod lights and features welded-in zip tie tabs to ensure clean wire management. Whether your truck has a single or dual exhaust setup, the RBCS1-04 is compatible with both and includes dedicated covers for dual exhaust tips. It is also designed to work perfectly with your factory trailer hitch.

• Direct-fit/bolt-on design for a straightforward installation.
• Compatible with factory parking sensors and license plate lights.
• Integrated mounts for (2) 3-inch pod lights.
• Sleek prerunner-style tube construction with CNC logo end caps.
• Micro-texture black powder coat finish for superior corrosion resistance.
• Compatible with single or dual exhaust (includes dual tip covers).
• Retains use of the factory receiver hitch.
• Welded zip tie tabs for organized electrical routing.
• Manufacturer Part Number: RBCS1-04

Fits 2021-2026 Ford Bronco all trim levels, including Raptor, Badlands, Wildtrak, and Everglades.

The DV8 Offroad Competition Series Rear Bumper (RBBR-05) is engineered for owners who demand a high-clearance, sleek design that maintains full vehicle utility. This bumper features a fully bolt-on installation that requires no drilling or permanent modification to your chassis. It is finished in a durable micro-texture black powder coat and accented with satin black aluminum panels and an aluminum-backed logo for a premium, rugged look.

This bumper is designed to accommodate up to a 37-inch spare tire on the factory carrier while retaining full use of your OEM tow hitch. It provides mounting points for two 3-inch light pods to enhance rear-facing visibility on the trail. For recovery operations, the bumper includes two 1-inch thick D-ring mounts that accept standard 7/8-inch pins. Integrated zip tie tabs are welded into the structure to ensure clean, secure wire management for your auxiliary lighting and sensors.

• Fits up to a 37-inch spare tire on the OEM carrier
• Retains full use of factory tow hitch
• Two 1-inch thick D-ring mounts (accepts 7/8-inch pins)
• Mounting points for two 3-inch light pods
• Welded-in zip tie tabs for clean wire management
• Micro-texture black powder coat finish with satin black aluminum accents
• Direct bolt-on installation; all mounting hardware included
• Manufacturer Part Number: RBBR-05

Fits select 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

The DV8 Offroad Competition Series Rear Bumper (RBBR-04) is engineered for high-clearance off-roading, drawing inspiration from desert racing aesthetics. This bumper features a robust steel tube and plate construction with a low-profile design that provides clearance for up to a 37-inch spare tire. To maintain factory utility, the bumper includes mounting holes for OEM reverse sensors and is fully compatible with the factory tow hitch.

For additional customization and lighting, the bumper includes two light mounts designed for 3-inch LED pods and two paintable aluminum accent panels to personalize your build while reducing weight. Installation is a straightforward bolt-on process using factory mounting points.

• Construction: High-strength steel tube and plate
• Finish: Durable black powder coat with paintable aluminum accents
• Lighting Compatibility: Dual mounts for 3-inch LED pods
• Tire Clearance: Fits up to a 37-inch spare tire
• Factory Integration: Retains OEM backup sensors and factory tow hitch
• Installation: Direct bolt-on; no drilling or welding required
• Manufacturer Part Number: RBBR-04

Fits 2021-2026 Ford Bronco all models including Badlands, Wildtrak, and Raptor.

The DV8 Offroad MTO (Modern Truck Overlanding) Series Rear Bumper provides high-clearance protection and recovery utility for the sixth-generation Bronco. Constructed from 4mm high-grade steel with 5mm steel mounts and supports, this bumper is finished in a durable 2-stage micro-texture powder coating. The design relocates the license plate to the side of the bumper, allowing for the use of up to a 37-inch spare tire on the OEM carrier while ensuring the tailgate swings freely.

This bumper is engineered to retain factory functionality, featuring integrated sensor holes to house the original backup sensors. For recovery and lighting, it includes reinforced D-ring mounts and two dedicated mounting points for 3-inch flush-mount pod lights.

• Heavy-duty construction: 4mm steel body with 5mm steel mounts
• Accommodates up to 37-inch spare tire on factory carrier
• Retains factory backup sensors with integrated mounting holes
• Includes side-mounted license plate bracket with LED license plate lights
• Two mounts for 3-inch flush-mount pod lights (BE3FMW40W recommended)
• Reinforced clevis mounts for 3/4-inch D-ring shackles
• Paintable aluminum mesh accent panels
• Manufacturer Part Number: RBBR-01

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited models across all trims including Rubicon, Sahara, Sport, and X.

The DV8 Offroad R4FL16W3W 4-inch LED Fog Lights provide a significant output upgrade over factory incandescent lighting. Designed to complement LED headlight conversions, these units are ideal for owners looking to improve visibility or refresh the look of their front bumper. These lights feature a housing geometry identical to the original equipment, ensuring a consistent fit whether you are mounting them in a factory bumper or a compatible aftermarket bumper designed for OE-style fog lights.

Installation is straightforward as the housings match the factory mounting points; the electrical connectors are designed to be spliced directly into your existing factory wiring harness for a secure and reliable connection.

• Output: 30W per light
• Diameter: 4 Inches
• Fitment: Factory-style replacement housing
• Wiring: Ready to be spliced into factory harness
• Quantity: Sold as a pair
• Manufacturer Part Number: R4FL16W3W

Fits all 2025-2026 Toyota 4Runner models including SR5, Limited, TRD Off-Road, TRD Pro, and Trailhunter.

Maximize the utility of your cargo area with the DV8 Offroad Rear Window Pocket Molle Panels. Designed to utilize the often-wasted space over the rear side windows, these panels provide a secure, organized mounting solution for trail gear, medical kits, and communication equipment. Each panel is laser-cut to match the factory window profile for a seamless, integrated appearance that doesn't compromise visibility.

Constructed for durability on rough terrain, these panels feature a micro-texture black powder coat finish to resist scratches and corrosion. Multiple integrated anchor points ensure a rigid, rattle-free fitment even during high-vibration off-road use. This kit is a direct bolt-on solution and includes both driver and passenger side panels.

• Direct Fit: Uses factory mounting locations for a straightforward, bolt-on installation.
• Construction: Heavy-duty steel with a durable micro-texture black powder coat.
• Versatile Storage: Compatible with MOLLE bags, fire extinguishers, axes, and holster mounts.
• Complete Set: Includes both Driver and Passenger side panels (MPTF3-02) and all necessary hardware.
• Safety Note: Not recommended for use in vehicles with active 3rd-row seating as these panels may interfere with side-curtain airbag deployment.

Fits 2010-2024 Toyota 4Runner (SR5, Limited, Trail, TRD Pro, TRD Off-Road, TRD Sport, and Venture).

Maximize your interior cargo capacity and organize your gear with the DV8 Offroad Rear Window Molle Panels. Designed to utilize the vertical space over the rear side windows, these panels provide a secure mounting surface for Molle bags, first aid kits, recovery gear, and tools. The precision-cut Molle pattern supports various attachment systems, including straps, bolts, and zip ties, ensuring your equipment stays put even on the toughest trails.

Each panel is engineered to conform to the interior lines of the 4Runner for a clean, integrated appearance. They are finished in a durable micro-texture black powder coat to resist scratches and corrosion. For added utility, these panels feature integrated rock light mounts, allowing you to install aftermarket LED lighting to illuminate the cargo area during night-time recovery or camping.

• Complete set includes both driver and passenger side panels
• Direct bolt-on installation to factory mounting points
• Integrated rock light mounts for interior cargo lighting
• Precision Molle pattern for versatile gear attachment
• Durable micro-texture black powder coat finish
• Manufacturer Part Number: MPT3-01

Fits select Jeep, Dodge, and RAM vehicles equipped with MOPAR parking sensors.

The DV8 Offroad MPRSNSR-01 Sensor Bezel and Clip Kit provides a reliable solution for mounting factory parking sensors into aftermarket bumpers. Because factory sensor brackets are often difficult to transfer or reuse without damage, this kit offers a direct replacement to secure your electronics in a professional-grade housing. The semi-directional design ensures proper sensor alignment for accurate proximity detection.

• Complete set includes four (4) semi-directional front bezels and four (4) rear clips
• Engineered for full compatibility with MOPAR parking sensors
• Replaces difficult-to-transfer factory brackets during bumper upgrades
• Simple installation for aftermarket front or rear bumper applications
• Durable construction designed for off-road environments
• Manufacturer Part Number: MPRSNSR-01

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models equipped with a factory hardtop. This overhead storage solution utilizes the space in the freedom panel area to create a secure mounting point for gear and accessories.

The DV8 Offroad MPJL-11 Roof Mount is engineered specifically to host the 15" x 12" Universal MOLLE Panel (UNMP-04). Constructed from high-strength, lightweight aluminum and finished in a micro-texture black powder coat, this mount provides a durable platform for attaching storage bags, communication radios, and other essential equipment. While the mount remains fixed once installed, it allows for adjustment of the panel to suit your specific clearance needs.

• Precision-cut aluminum construction for strength and weight savings
• Micro-texture black powder coat finish for superior corrosion resistance
• Designed specifically for the UNMP-04 15" x 12" Universal MOLLE Panel
• Compatible ONLY with factory hardtops; does not fit soft tops or aftermarket tops
• Drilling into the factory hardtop is required for installation
• Sold individually (per side); mounting hardware included
• Manufacturer Part Number: MPJL-11

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT.

Upgrade your interior utility with the DV8 Offroad Rear Door Molle Panel Pockets (MPJL-06). These panels are engineered to replace the factory door nets, which are prone to sagging and stretching over time. Constructed from rigid steel, these panels provide a stable, long-term storage solution that retains its shape even under the weight of heavy gear.

The design features a specific protrusion at the front to maximize internal volume, allowing you to securely carry water bottles or larger items that standard mesh pockets cannot support. The integrated Molle grid allows for custom gear mounting, making it easy to attach holsters, tool pouches, knives, or other essential recovery gear directly to your door.

• Rigid Steel Design: Replaces weak factory mesh with a durable steel structure that will not sag or lose tension.
• Molle Compatibility: Standardized grid layout supports a wide range of gear mounting solutions for off-road or daily use.
• Increased Capacity: Flared front design accommodates water bottles and bulky items.
• Secure Installation: Features a snap-in design with locking tabs to ensure the pocket stays firmly seated in the factory mounting points.
• Premium Finish: Micro-texture black powder coat provides scratch resistance and matches the OE interior trim.
• Manufacturer Part Number: MPJL-06

Fits 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) models.

Replace weak, sagging factory door netting with a high-strength storage solution. The DV8 Offroad Front Door Pocket Molle Panels (MPJL-05) are engineered to provide a rigid, permanent replacement for OEM nets that lose their elasticity over time. These panels feature a specialized front protrusion to maximize clearance for larger water bottles and everyday essentials.

The laser-cut Molle pattern offers a versatile mounting surface for pouches, tools, holsters, and gear. Built for the trail, these panels use a secure snap-in design with integrated locking tabs to ensure your storage stays firmly seated regardless of terrain.

• Rigid steel construction replaces unreliable factory netting
• Extended front profile accommodates water bottles and larger items
• Precision Molle pattern for modular gear mounting solutions
• Durable micro-texture black powder coat finish resists scratches and corrosion
• Simple snap-in installation with secure locking tabs
• Includes both driver and passenger side front door panels
• Manufacturer Part Number: MPJL-05

The DV8 Offroad Overhead Molle Panel (MPJL-04) provides a versatile internal storage solution for 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) models. This panel converts unused cabin space into a rigid mounting surface for MOLLE pouches, communications equipment, and emergency gear, while creating a secondary storage shelf above the panel for soft goods like blankets or recovery straps.

• Fits 2-door and 4-door 2018-2025 Jeep Wrangler and 2020-2025 Jeep Gladiator.
• Compatible with factory and DV8 Offroad hardtops; includes specific cutouts for easy Freedom Panel removal.
• 100% bolt-on installation utilizing factory mounting points with no drilling or trimming required.
• Durable steel construction finished in a micro-texture black powder coat for corrosion resistance.
• Provides secure mounting points for CB/race radios, med-kits, holsters, and gear pouches.
• Manufacturer Part Number: MPJL-04

Fits 2003-2009 Lexus GX470 Base.

The DV8 Offroad MPGX-03 Molle Door Pocket addresses the common issue of sagging factory cargo nets. This rigid storage solution is constructed from 3mm steel and finished in a micro-texture black powder coat, ensuring the panel maintains its structural integrity even when loaded with heavy gear. It provides a secure mounting surface for Molle pouches, recovery tools, med-kits, and other trail essentials.

The design features a tall front panel to keep stowed items in place during steep climbs or rough off-road terrain. With a deep storage footprint, this panel significantly improves cargo utility over the flimsy OE mesh. Installation is straightforward, though some drilling is required to properly secure the unit to the door.

• Replaces sagging factory door cargo nets with a rigid steel solution
• Laser-cut from 3mm steel for maximum durability
• Micro-texture black powder coat finish for scratch and corrosion resistance
• Storage Dimensions: 3.5" x 5.5" x 20.5"
• Uniform Molle grid for versatile accessory mounting
• Tall front face design prevents gear from sliding out on inclines
• Manufacturer Part Number: MPGX-03

Fits 2003-2009 Lexus GX470 Base models.

The DV8 Offroad Rear Window Molle Storage Panels (MPGX-01) are designed to maximize the utility of your cargo area without sacrificing interior space. These panels follow the natural contour of the Lexus GX470 rear windows and body lines, providing a sleek, integrated look while offering a heavy-duty mounting surface for off-road essentials.

Engineered for versatility, these panels feature a standard Molle mesh pattern alongside individual mounting holes, making them compatible with a wide range of pouches, recovery tools, and gear. Installation is straightforward, utilizing factory mounting points for a secure, bolt-on fit that remains stable even on the roughest trails.

• Precision-fit for 2003-2009 Lexus GX470 Base
• Increases storage capacity for recovery supplies and tools
• Compatible with Molle pouches and various mounting hardware
• Simple bolt-on installation to factory mounting points
• Includes both driver and passenger side panels
• Manufacturer Part Number: MPGX-01

Fits 2021-2025 Ford Bronco 2-Door models including Badlands, Wildtrak, Outer Banks, and Raptor.

The DV8 MPBR-09 Overhead Molle Panel maximizes the interior utility of your Ford Bronco by utilizing unused space above the cabin. This system provides a secure mounting surface for essential gear such as med-kits, communication radios, tools, and holsters, ensuring they remain accessible while keeping the floor and seats clear. For longer trips, the space above the panel serves as an additional storage shelf for soft items like blankets or recovery bags.

Engineered for durability on the trail, the panel is constructed from 3mm plate steel and features a 1-1/4-inch steel tube at the rear. This tube serves a dual purpose as a rigid mounting point for additional accessories or as a convenient grab handle for rear-seat passengers. The entire assembly is finished in a micro-texture black powder coat to match the factory interior and resist corrosion. Installation is a direct bolt-on process using factory mounting points for maximum rigidity.

• CNC-cut 3mm plate steel construction
• 1-1/4" integrated steel tube grab handle and accessory mount
• Includes (1) Baja Designs dome light mount
• Durable micro-texture black powder coat finish
• Molle-pattern design for flexible gear organization
• Direct bolt-on installation to factory points
• Manufacturer Part Number: MPBR-09

Fits 2021-2025 Ford Bronco 4-door models.

Upgrade your interior utility with the DV8 Rear Door Pocket Molle Panels (MPBR-06). Designed to solve the common issue of sagging factory door nets, these rigid panels provide a durable and secure mounting platform for your gear. Each panel is uniquely contoured to accommodate large water bottles or coffee thermoses, significantly increasing the functional storage of your rear seating area.

Constructed from 2mm steel and finished in a micro-texture black powder coat, these panels are built to withstand the rigors of off-road use while seamlessly blending with the Bronco interior. The integrated Molle grid allows you to attach pouches, first aid kits, and small tools exactly where they are needed most.

• Includes driver and passenger side panels
• Precision-cut 2mm steel construction
• Micro-texture black powder coat finish
• Integrated Molle accessory mounting points
• Contoured design fits water bottles and thermoses
• Requires some drilling for a secure installation
• Manufacturer Part Number: MPBR-06

Fits all 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

Eliminate the common issue of sagging factory door nets with the DV8 Offroad Front Door Pocket Molle Panels. These rigid panels are a direct-fit replacement, transforming flimsy mesh into a secure, heavy-duty storage solution. Engineered from 2mm steel and finished in a durable micro-texture black powder coat, these panels are designed to handle the rigors of off-road use while providing a clean, factory-plus interior aesthetic.

• Replaces sagging factory door pocket nets with rigid steel storage
• Precision-cut Molle grid allows for mounting pouches, holsters, and gear
• Uniquely contoured design includes a dedicated space for water bottles
• Heavy-duty 2mm steel construction for long-term durability
• Micro-texture black powder coat finish resists scratches and corrosion
• Straightforward bolt-on installation using factory mounting points and hardware
• Sold as a pair (Includes driver and passenger side panels)
• Manufacturer Part Number: MPBR-05

Fits all 2021-2025 Ford Bronco 4-Door models, including Badlands, Big Bend, Outer Banks, Wildtrak, and Raptor, equipped with either a soft or hard top.

Maximize the interior utility of your Bronco with the DV8 Offroad Overhead Molle Panels. These panels utilize the factory mounting points for a bolt-on installation, providing a secure platform for organizing gear that is often difficult to store. The system is designed to accommodate Molle bags, communication equipment like CB or race radios, phone and tablet holders, and specialized tool sheaths. The upper section of the panel features a flared design, creating a dedicated shelf for stowing soft goods like blankets or recovery bags.

Construction includes a 1-inch thick integrated tube that serves as a secondary grab handle for rear passengers or an additional mounting point for heavy-duty accessories. Integrated slotted holes allow for the direct mounting of Baja Designs dome lights or other interior lighting solutions with variable mounting widths. Each panel is finished in a durable micro-texture black powder coat to resist scratches and match the factory interior aesthetics.

• Fits 2021-2025 Ford Bronco 4-Door models
• Compatible with Molle straps, bolts, and various attachment systems
• Includes 1-inch diameter tubing for grab handle or accessory mounting
• Features integrated slotted holes for dome light installation
• Micro-texture black powder coat finish for long-term durability
• Works with both hard top and soft top configurations
• Utilizes factory mounting locations; no drilling required
• Manufacturer Part Number: MPBR-04

Fits select 2021-2026 Ford Bronco models equipped with the OEM Capable Steel Bumper. This mount relocates your license plate to the center of the bumper, clearing the grille to maximize airflow to the engine compartment and cooling system. Designed with a steep angle for maximum approach clearance, the LPBR-05 bracket provides a clean, aesthetic look while keeping your plate visible and legal.

Constructed for durability on the trail, the mount features a micro-texture black powder coat finish that resists corrosion and matching the factory trim. Installation is a straightforward bolt-on process that utilizes existing factory hardware, allowing you to quickly remove the mount before hitting technical trails.

• Fitment Note: Specifically designed for the OEM Capable Steel Bumper; does not fit HD Modular Steel or plastic bumpers.
• Optimal Airflow: Positions the plate away from the grille to prevent cooling interference.
• High Clearance: Angled design ensures the plate does not impact ground clearance or approach angles.
• Finish: Durable micro-texture black powder coat.
• Installation: Easy bolt-on design using factory hardware.
• MPN: LPBR-05

Fits 2021-2026 Ford Bronco models equipped with the OEM Capable Steel Bumper. This license plate relocation bracket moves your plate to the center of the bumper, clearing the grille to ensure maximum airflow to the engine compartment and cooling system. Designed specifically for the factory steel bumper, it provides a clean, centered aesthetic without obstructing integrated fog lights.

Built for durability on and off the pavement, the bracket is finished in a micro-texture black powder coat to resist corrosion and match factory trim. The simple bolt-on design utilizes existing factory hardware for a quick installation. For owners heading off-road, the bracket is easily removable in minutes to prevent damage during moderate to difficult trail use.

• Relocates license plate away from the grille for optimized cooling
• Designed for the OEM Capable Steel Bumper
• Does not impede factory fog light visibility
• Micro-texture black powder coat finish for superior durability
• Simple bolt-on installation using factory hardware
• Quickly removable for trail clearance
• Manufacturer Part Number: LPBR-04

Fits 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

The DV8 Offroad LPBR-03 Rear License Plate Relocation Bracket is an essential solution for Bronco owners upgrading to aftermarket rear bumpers. Many high-clearance off-road bumpers lack a dedicated plate mount or obscure the factory location; this bracket relocates the license plate to the center of the tailgate, mounting directly to the OEM spare tire carrier. This positioning ensures the plate remains visible and legally compliant while staying clear of the vehicle's factory blind spot detection sensors.

• Relocates license plate to the tailgate/OEM spare tire carrier
• Maintains functionality of blind spot detection sensors
• Includes ultra-bright LED license plate light and necessary wiring
• Durable construction designed for off-road environments
• Minor wiring required for installation
• Manufacturer Part Number: LPBR-03

Fits select 2021-2026 Ford Bronco and 2021-2022 Ford Bronco Sport models.

Move your front license plate to a more aesthetic and functional location with the DV8 Offroad LPBR-01 relocation bracket. While factory dealer options often mount the plate high, obstructing the grille and cooling airflow, this bracket positions the plate below the center of the bumper. The angled design ensures the plate remains tucked away to maintain ground clearance during off-road use without interfering with the Adaptive Cruise Control (ACC) sensor.

Built for durability on the trail, the bracket is constructed from heavy-duty 3mm steel and finished in a micro-texture black powder coat for superior corrosion resistance. It features three integrated M12 nuts, providing convenient mounting points for accessories such as pod lights or camera mounts. Installation is straightforward, bolting directly to factory bumper mounting points with no permanent modifications required.

• Part Number: LPBR-01
• Constructed from 3mm steel
• Micro-texture black powder coat finish
• Includes (3) M12 nut mounting points for accessories
• Maintains functionality of Adaptive Cruise Control (ACC) sensor
• Positions plate away from the grille for better airflow
• Direct bolt-on installation to factory mounting points

Maintain street legality without compromising recovery performance with the DV8 Offroad LPBM-02 Fairlead Mounted Flip-Up License Plate Bracket. This universal solution provides a secure mounting point for your front license plate that quickly flips up to allow unobstructed access to your winch rope during trail recoveries.

Built to withstand off-road use, this bracket is finished in a durable micro-texture black powder coat to resist corrosion and matches most aftermarket bumper finishes. The fully bolt-on design allows for a clean installation in minutes using standard fairlead mounting points. It is compatible with standard flat fairlead mounts and many recessed fairlead designs, specifically engineered for hawse-style fairleads.

• Manufacturer Part Number: LPBM-02
• Finish: Micro-texture black powder coat
• Compatibility: Standard flat fairlead mounts and most recessed fairlead mounts
• Vehicle Fitment: Fits recessed mounts on DV8 bumpers (excluding FBTT2-05 Tundra Center Mount)
• Constraint: Not compatible with roller-style fairleads
• Installation: Direct bolt-on; works well with fairlead part number WBPF-01

The DV8 Offroad LBUN-01 Bull Bar Add-On is engineered specifically for the MTO Series Front Bumpers on the 2021 Ford Bronco. This bolt-on accessory provides enhanced front-end protection for your grille and winch while serving as a dedicated mounting platform for auxiliary off-road lighting.

Constructed from high-grade steel, this bull bar is finished in a durable 2-stage micro-texture powder coat designed to withstand trail debris and resist corrosion. It is purpose-built to accommodate the DV8 Offroad 13-inch Elite Series Light Bar, allowing you to integrate high-output lighting without the need for custom fabrication or drilling.

• Direct bolt-on compatibility with DV8 Offroad MTO Series Front Bumpers
• Constructed from heavy-duty high-grade steel
• Durable 2-stage micro-texture black powder coat finish
• Integrated mounting points for 13-inch Elite Series Light Bar
• Manufacturer Part Number: LBUN-01

Fitment: Fits 2021 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks, and Wildtrak).

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition models.

Protect your front-end from trail debris and light brush with the DV8 Offroad Front Brush Guard. Engineered as a direct bolt-on for the 2024-2026 Toyota Land Cruiser, this guard (MPN: LBTF4-02) provides an extra layer of defense without interfering with your factory recovery points or bumper. It is specifically designed to maintain full functionality of all factory sensors and safety components, ensuring your vehicle's systems operate exactly as intended.

• Manufactured for direct bolt-on installation using factory hardware.
• Retains use of original recovery points and factory sensor systems.
• Mounting points for universal 2-inch tube light brackets to enhance trail visibility.
• Micro-texture black powder coat finish for long-term durability and corrosion resistance.
• Engineered for an easy DIY installation with no cutting or drilling required.

Fits select 2018-2025 Jeep Wrangler (JL/JLU) and 2020-2025 Jeep Gladiator (JT). These DV8 Offroad A-pillar mounts allow you to add four 3-inch LED light pods to your setup, providing significant trail illumination without compromising visibility. The low-profile design mounts directly to the hood cowl area, positioning two pods on each side of the vehicle.

Built for durability in off-road environments, these brackets feature a micro-texture black powder coat finish that resists corrosion and matches factory trim. The dual-mount configuration offers versatility, allowing you to aim one pod forward for long-distance lighting and the second to the side for better peripheral visibility on technical trails. Note: This system is designed exclusively for use with the DV8 Offroad LBJL-10 Light Bar Mount and cannot be installed as a standalone component.

• Provides mounting points for (4) 3-inch pod lights (2 per side)
• Compatible with clear or amber LED pods
• Constructed with a sleek, low-profile design to maintain sightlines
• Durable micro-texture black powder coat finish
• Manufacturer Part Number: LBJL-11
• Requires DV8 Offroad LBJL-10 Light Bar Mount for installation