Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
175 products
175 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$899.99
Our Centric Series Front Bumper has all the features you need in an off-road bumper, in a compact & low-profile package. It was designed to complement factory styling, avoid altering the fenders, and to provide lighting and multiple recovery options. There is a hidden winch mount capable of fitting multiple size winches. Winch access is provided above the bumper, just beneath the grille. Cutaways on either side of the fairlead provide mounting points for 3-inch light pods. If youre not running pods at these cutaways, they can be used as additional access points for the winch. Below the winch is an inset mounting point for a single row 20-inch light barAdditional recovery options are afforded by the 1-inch thick D-ring mounts that take -inch D-rings with -inch shackle pins.
- (2) Mounting Points for 3 Light Pods (Only When Not Running a Winch)
- Welded Tabs Provide Clean Wire Management Options
- Compatible with Adaptive Cruise & Parking Sensors
- Mounting Point for 20 Single Row Light Bar
- Compatible with All Factory Skid Plates
- 1 Thick D-Ring Mounts for Shackles
- Center Mount Factory Style Bumper
- Compatible with all Trim Levels
- Accepts Multiple Size Winches
- Hidden Winch Mount
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$1,399.99
The MTO Series bumper is compatible with factory skid plates across all trims, including the TRD. The Adaptive Cruise Control module is unaffected, retaining full functionality. The parking sensors are incorporated into the bumpers design and function normally. Additionally, the intercooler is guarded by steel plating for added protection. Steel tabs for zip ties at strategic locations on the interior of the bumper help you to achieve solid wiring management for your lights and winch.
Catalog- High Clearance Design for an Ultimate Approach Angle
- Compatible with Stock Skid Plates Including TRD
- Mounts for (2) 3 Light Pods & (1) 20 Light Bar
- Hidden Winch Mount for Many Sized Winches
- Internal Zip Tie Tabs for Wire Management
- Armor the Protects the Lower Intercooler
- Paintable Aluminum Accent Panels
- Retains ACC & Parking Sensors
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$799.99
Our Winch Front Bumper is made with 3, 3.5, and 5mm plate steel for a robust construction that is built to protect the front of your rig from obstacles. The bumper is finished in a durable micro-texture black powder coat to prevent rust and is also compatible with OEM sensors, cameras, fog lights, and adaptive cruise control. Installation is easy with minimal cutting required. The integrated zip tie tabs allow you to effectively organize your aftermarket lights wiring.
- Retains OEM Sensors, Fog Lights, Cameras, and Adaptive Cruise Control
- Accepts Various Standard Sized Heavy Duty Winches
- (2) 1 Thich D-Ring Mounts that Accept a 7/8 Pin
- Welded-In Zip Tie Tabs for Wire Management
- Micro-Texture Black Powder Coat Finish
- Made out of 3, 3.5, & 5mm Plate Steel
- Mounts (1) 20 Single Row Light Bar
- Minimal Cutting Required
- Mounts (2) 3 Pod Lights
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Toyota | Tacoma | Limited |
| 2024-2026 | Toyota | Tacoma | SR |
| 2024-2026 | Toyota | Tacoma | SR5 |
| 2024-2026 | Toyota | Tacoma | Trailhunter |
| 2024-2026 | Toyota | Tacoma | TRD Off-Road |
| 2024-2026 | Toyota | Tacoma | TRD PreRunner |
| 2024-2026 | Toyota | Tacoma | TRD Pro |
| 2024-2026 | Toyota | Tacoma | TRD Sport |
$799.99
We designed the Centric Series Winch Front Bumper for durability and to match factory styling. This center mount bumper doesnt require cutting into the side fenders like a full-width bumper would require. A hidden winch mount can fit multiple size winches, and is tucked away behind the bumper skid. Additional recovery options are provided by 1-inch thick mounts that take -inch D-rings.
- Minimal Cutting for an Easy Installation
- Mounts a 20 Single Row LED Light Bar
- Center Mount Winch Front Bumper
- Micro-Texture Black Powder Coat
- 1 Thick D-Ring Shackle Mounts
- Accepts Multiple Size Winches
- Mounts (2) 3 LED Light Pods
- Complements Factory Styling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
$649.99
2016+ Toyota Tacoma Center Mount Winch Capable Front Bumper. The DV8 Offroad FBTT1-05 Tacoma Center Mount Bumper takes away the hassle of cutting your OEM plastic when installing an aftermarket bumper on a 16+ Tacoma and also allows you to mount up to a 12,500 lbs. winch. For those who want exceptional looks and function without committing to a full length bumper or cutting up a brand new truck. Details: Bolt on design, No cutting required, Excellent clearance, Mounts up to a 12,500 lbs. winch, Comes powder coated
CatalogInstallation Instructions
- Micro-Texture Black Powder Coat Finish
- (1) 20 Light Bar Mount on Bull Bar
- Retains OEM Fog Lights & ACC
- 3mm/5mm Steel Construction
- (2) 1 Thick D-Ring Mounts
- Included Bolt-On Bull Bar
- Heavy-Duty Winch Mount
- Welded-In Zip Tie Tabs
- Center Mount Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
$1,049.99
2024-2026 Toyota Land Cruiser Spec Series Front Bumper. Accepts multiple winch sizes (max 20.9” x 6.3” x 10”). Fits (2) 3” pod lights and a 20” light bar. Includes four top slots for hidden light mounting. Retains factory sensors and ACC. Hidden winch mount with 1” D-ring recovery points. Welded zip-tie tabs for wire management. Micro-texture black powder coat with satin black accent panel. Includes skid plate to front cross member. Fully bolt-on installation.
Installation Instructions- Accepts Multiple Size Winches (Max dimensions: 20.9” x 6.3” x 10” Length x width x height)
- 4 elongated slots on top of bumper to mount lights behind factory bumper mesh
- Retains Factory Parking Sensors and ACC Locations
- Welded Zip-Tie Tabs for Clean Wire Management
- Skid plate from bumper to front cross member
- 20” Light Bar Mount in Center of Bumper
- (2) 3” Pod Light Mounts in Side Pods
- Micro-Texture Black Powder Coat Finish
- Satin Black Accent Panel Finish
- Improves Ground Clearance
- 1” Thick D-Ring Mounts
- Bolt-On Installation
- Hidden Winch Mount
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Toyota | Land Cruiser | 1958 |
| 2024-2026 | Toyota | Land Cruiser | Base |
| 2024 | Toyota | Land Cruiser | First Edition |
$699.99
The front bumper is finished in a micro-texture black powder coat. It retains the OEM front camera, sensors, fog lights, skid plate, and adaptive cruise control in equipped vehicles. Installation is straightforward, and included with the bumper are welded-in zip tie tabs. The bumper is compatible with all trim levels, including the 1958.
- Retains OEM Front Camera, Sensors, & ACC
- Micro-Texture Black Powder Coat Finish
- Retains OEM Fog Lights & Skid Plate
- (1) 20 Single Row Light Bar Mount
- Cutting Required for Installation
- 3/3.5/5mm Steel Construction
- (2) 1 Thick D-Ring Mounts
- Integrated Winch Mount
- Welded-In Zip Tie Tabs
- Center Mount Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2026 | Toyota | Land Cruiser | 1958 |
| 2024-2026 | Toyota | Land Cruiser | Base |
| 2024 | Toyota | Land Cruiser | First Edition |
$899.99
The 2025 Toyota 4Runner Centric Winch Front Bumper adds strength and off-road protection while keeping a factory look. It fits most winches, a 20-inch light bar, and two 3-inch light pods, with optional extra light mounts. It retains factory sensors and fog lights, includes welded zip-tie tabs for clean wiring, needs only minor cutting to install, and comes in a durable micro-texture black powder coat.
Installation Instructions- Center mount design to keep factory styling while offering recovery and protection offroad.
- Rugged steel design complements the factory bumper and aesthetic.
- Optional light mounts for additional lighting on the trail.
- Keeps sensors and factory fog lights in stock locations.
- Minimal cutting makes for a quick and easy install.
- (2) 1" Thick D-Ring mounts that accept a 7/8" pin
- Welded-in zip tie tabs for wire management.
- Minor cutting Required for Installation
- Not Compatible with Factory Skid Plate
- Accepts a 20” Single Row Light Bar
- Micro Texture Black Powder Coat
- Accepts multiple size winches.
- Accepts Two 3” Light Pods
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | 4Runner | Limited |
| 2025-2026 | Toyota | 4Runner | Platinum |
| 2025-2026 | Toyota | 4Runner | SR5 |
| 2025-2026 | Toyota | 4Runner | Trailhunter |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road Premium |
| 2025-2026 | Toyota | 4Runner | TRD Pro |
| 2025-2026 | Toyota | 4Runner | TRD Sport |
| 2025-2026 | Toyota | 4Runner | TRD Sport Premium |
$799.99
Our Centric Series Winch Front Bumper features a mid-width design that complements the iconic style of the front end. A hidden winch mount that accepts multiple size winches and 1-inch thick D-ring mounts provide ample recovery options. A recessed light mount for 20-inch single row light bars sits at the center of the bumper. Additional lighting provisions include (2) 3-inch pod light mounts. Note that if you install the pod lights, you will need a winch with a wireless remote as the pods will block access. Welded zip-tie tabs provide for clean wire management behind the bumper.
- (2) 3 Light Pod Mounts (Removes Access to Winch Unless it has Wireless Remote)
- Welded Zip Tie Tabs for Clean Wire Management
- Hidden Winch Mount for Multiple Size Winches
- Does not Interfere with Factory Fog Lights
- Micro-Texture Black Powder Coat Finish
- Mid-Width Center Mount Front Bumper
- Recessed 20 LED Light Bar Mount
- (2) 1 Thick D-Ring Mounts
- Retains Factory Styling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2014-2024 | Toyota | 4Runner | Limited |
| 2020-2021 | Toyota | 4Runner | Nightshade |
| 2014-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2014-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2022-2024 | Toyota | 4Runner | TRD Sport |
| 2020-2021 | Toyota | 4Runner | Venture |
$849.99
The Front Bumper features removable wings for a full or stubby width design. The bumper offers a recessed winch mount, and it is compatible with the OEM tow hooks in equipped vehicles. The bumper provides two light mounts that are compatible with (2) 3-inch pod lights or DV8’s JL & JT 4-inch LED Fog Lights. You can also install DV8’s Elite Series Light Bar Mount to the top of the bumper for running DV8’s 13-Inch Elite Series LED Single Row Light Bar. The included bull bar is removable, and the bumper comes with a winch plate cover for when you’re not mounting a winch. The bumper is made from steel, and it is finished in a micro-texture black powder coat. * Please Note: The bumper is not compatible with the factory front skid plate. As a replacement, we recommend DV8’s Sway Bar Disconnect Skid Plate. ** Please Note: Minor trimming may be required for installation. *** Please Note: The bull bar and winch may obstruct the front camera in equipped vehicles.
Installation Instructions- Included Winch Plate Cover for when Winch Mount is Not Utilized
- Compatible w/ DV8’s 13” Elite Series Light Bar & Mount
- Compatible w/ Factory Jeep Tow Hooks (If Equipped)
- Removable Wings for a Full or Stubby Width Design
- (2) 4” Fog Light or 3” Pod Light Mounts
- Micro-Texture Black Powder Coated Finish
- 3mm & 5mm Steel Construction
- Included Steel Bull Bar
- Recessed Winch Mount
- Retains OEM Styling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2026 | Jeep | Wrangler | Rubicon |
| 2023-2024,2026 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2026 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2026 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2026 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2026 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2026 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$899.99
Our MTO Series Winch Front Bumper for the Jeep Wrangler & Gladiator features a full-width design for maximum protection on the trail. Its aggressive design and flared wings look great with the JK factory fenders and the JL/JT Rubicon and Non-Rubicon fenders. The recessed winch tray accepts multiple size winches, and sits protected behind a tubular bull bar. Additional recovery options are provided by the 1-inch D-ring mounts that take ?-inch shackle pins. Sitting behind paintable aluminum accent panels is a mount that can take a DV8 Elite 20? single row light bar, Baja Designs S8 20?, or Rigid SR 20? LED light bars. On each wing of the bumper is a mount for a 3-inch light pod. The bumper is finished in a micro-texture black powder coat, and features a fully bolt-on installation.
Catalog- (Additional info: Recessed winch tray/ 20" light bar bracket that is also a winch plate support bracket/ Modular wings for shipping efficiency)
- Full width designed to work with any of the JKJL/JT factory fender options.
- 20" single row light bar mount (Amber and clear lens compatible)
- Provides (2) 1" thick D-ring mounts for 7/8" shackle pin.
- Full Width design for maximum front end protection!!
- Works flawlessly with the SPJL-02 skid plate
- Mounts on each wing for 3" Light Pod
- Accepts multiple size winches.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2007-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2007-2017,2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2010-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2016,2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2007-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2007-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2010-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2016,2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
| 2007-2010 | Jeep | Wrangler | X |
$799.99
This stubby winch front bumper was designed to maintain good clearance off-road, recovery options, and supplemental lighting. It is compatible with the Wrangler JK & JL, as well as the Gladiator JT. Multiple size winches can be installed in a recessed winch tray behind the protective tubular bull bar. 1-inch thick D-ring mounts that take ?-inch shackle pins provide additional recovery options. An inset light mount in the center of the bumper fits the DV8 Elite 20?, Baja Designs 20?, or Rigid 20? dual row light bars. The bumper is finished in a micro-texture black powder coat, and features a completely bolt-on installation.
Catalog- Recessed winch tray and bolt on fairlead mount (For people who dont run a winch right away).
- Gusseted and support tube bull bar design for extra bull bar strength and safety.
- 20" dual row light bar mount (Amber and clear lens compatible)
- High clearance Stubby design for ultimate approach angles!!
- Provides (2) 1" thick D-ring mounts for 7/8" shackle pin.
- Works flawlessly with the SPJL-02 skid plate
- Accepts multiple size winches.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2007-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2007-2017,2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2010-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2016,2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2007-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2007-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2010-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2016,2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
| 2007-2010 | Jeep | Wrangler | X |
$949.99
Introducing the new Spec Series line of bumpers from DV8 Offroad. Our designers worked to create a Jeep winch front bumper that not only provided protection & recovery options off-road, but gives your Jeep a truly unique look. Its high clearance design is perfect for aggressive rock crawling, ensuring you can tackle any obstacles. At the center of the bumper is a removable winch plate that can mount most full-sized winches. Pictured in the gallery is a Warn 12s EVO. The bull bar can mount up to a 15-inch light bar above or below if not running a winch.
Catalog- Accepts (1) 20" Light Bar, (1) 15" Light Bar, and (2) Round Lights (No bigger than LP4 or Rigid 360)
- Included Bull Bar For Protection Against Light Debris/ Brush
- High Clearance Design For Aggressive Rock Crawling
- Welded-in Zip Tie Tabs For Clean Wire Management
- Micro-Texture Black Powder Coat
- Accepts Multiple Size Winches
- Satin Black Mesh Accent Plate
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$799.99
This Mid-Width Winch Front Bumper for the Jeep Wrangler JL & Gladiator JT is a remake of the classic DV8 FS-7 bumper. The winch tray is recessed to keep the winch at a lower profile position, and can accommodate many different sizes of winches. A bull bar sits in front of the winch providing protection. Additional recovery options include D-ring mounts that take ?? shackles. Its high clearance design is perfect for rock crawling. At the center of the bumper is a light mount for a dual row 20-inch light bar. Additionally, each wing can take a 3-inch pod light.
Catalog- Perfect for aftermarket or factory fenders (Rubicon and non-Rubicon)
- 20" dual row light bar mount (Amber and clear lens compatible)
- Provides (2) 1" thick D-ring mounts for 7/8" shackle pin.
- High clearance design for ultimate approach angles!!
- Welded-in zip tie tabs for wire management.
- Works amazing with the SPJL-02 skid plate
- DV8's legacy mid width bumper design.
- Accepts multiple size winches.
- Recessed winch tray.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2007-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2007-2017,2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2010-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2016,2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2007-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2007-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2010-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2016,2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
| 2007-2010 | Jeep | Wrangler | X |
$749.99
We took our iconic FS-15 Front Bumper and introduced several improvements. We reduced its weight while maintaining the same standards in strength and protection. The overall fit and finish was improved, and JL/JT models no longer require a bumper adapter. The FS-15 was designed for performance and protection while on the trail. Its high clearance design is well suited for OHV trails. The winch mount can fit multiple winch sizes, including most 12,000lb winches. Additional recovery options include dual 1-inch thick D-ring mounts for ?-inch shackles. The heavy duty bull bar protects both the winch and grille from light debris such as brush or small branches. This bumper features mounting points for factory 4-bolt style 4-inch fog lights. The bull bar is capable of mounting either dual light pods or our 13-inch Elite Series Light Bar. Installation on JL/JT models is a strictly bolt-on process, but please note that JK models require trimming or removal of the plastic trim cover.
Catalog- HD bull bar to protect the winch/grille from light debris - branches, brush, etc..
- (2) 1" thick D-Ring mounts that accept a 3/4" shackle (7/8" pin).
- High clearance design for ultimate approach angles!!
- Fits multiple size winches and most 12k lb winches.
- An updated design of an iconic DV8 legacy item!
- Works amazing with the SPJL-02 skid plate
- Stubby front bumper.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2007-2025 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024-2025 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2025 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2007-2017,2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2010-2025 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2016,2018-2025 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2007-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2007-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2010-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2016,2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2021-2025 | Jeep | Wrangler | Willys |
| 2023-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
| 2007-2010 | Jeep | Wrangler | X |
$1,299.99
This overland-style winch front bumper for the GX 470 was designed to provide protection to the front end of your Lexus. A winch can be mounted securely within the bumper, and accessed through two openings at the top of the bumper. At the front of the bumper are two heavily reinforced clevis mounts that can take ?-inch d-rings.?Like all MTO (Made To Overland) Series bumpers, it features an optional Bull Bar that can mount a 13-inch single row LED light bar. Additionally, a 3-inch LED pod light can be mounted in each wing of the bumper. The perforated aluminum mesh accent plates can be removed and painted if desired.?There is also a dual row 20 in light bar mount behind the center mesh panel.
CatalogInstallation Instructions
- DUAL ROW 20 in LIGHT BAR MOUNT BEHIND CENTER MESH
- Dual Row 20" Light Bar Mount Behind Center Mesh
- OPTIONAL BULL BAR & 13-INCH LIGHT BAR
- 3.5MM PAINTABLE ALUMINUM MESH PANELS
- 2-STAGE MICRO-TEXTURE POWDER COATING
- 4MM BODY AND 5MM MOUNTS/SUPPORTS
- (2) 3 in POD LIGHT MOUNTS
- REINFORCED D-RING MOUNTS
- (2) 3 Pod Light Mounts
- IN-BUMPER WINCH MOUNT
- 3-PIECE CONSTRUCTION?
- 3-Piece Construction
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2009 | Lexus | GX470 | Base |
$1,199.99
The Spec Series offers improved ground clearance, and it is made from high-quality steel for maximum trail protection. The bumper is compatible with the factory parking sensors, front camera, and adaptive cruise control. The welded-in zip tie tabs allow for clean wire management when installing lights or winch. With its resilient micro-texture black powder coat and aggressive styling, our front bumper is designed to accent the factory styling of your rig. Whether youre on the trail or in the city, our bumper will make your Sierra stand out amongst the crowd.
- Satin Black Powder Coated Mesh Accent Panels
- (1) 20 Dual or Single Row Light Bar Mount
- Micro-Texture Black Powder Coat Finish
- Standard Heavy-Duty Hidden Winch Mount
- Included Steel Front Skid Plate
- Retains OEM Front Camera & ACC
- 3.5mm & 5mm Steel Construction
- Retains OEM Parking Sensors
- Improved Ground Clearance
- (2) 1 Thick D-Ring Mounts
- (2) 3 Pod Light Mounts
- Welded-In Zip Tie Tabs
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | GMC | Sierra 1500 | AT4 |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2021 | GMC | Sierra 1500 | Denali |
| 2019-2021 | GMC | Sierra 1500 | Elevation |
| 2019-2021 | GMC | Sierra 1500 | SLE |
| 2019-2021 | GMC | Sierra 1500 | SLT |
$159.99
2017+ Ford Super Duty F-250/350 Adaptive Cruise Control Relocation Bracket. The DV8 FBFF2-BR Adaptive Cruise Relocation Bracket can be used with any aftermarket bumper for your 2017+ F-250 or F-350. It moves the Adaptive cruise sensor up into the grill so that it is still operational and the adjustable design allows you to tune it in just right for your truck. Details: Economical relocation bracket, Keeps use of OEM Adaptive Cruise Control, Can be used with any bumper, Attaches inside the grill, Textured Powdercoat, DV8 assumes no responsibility for improperly installed brackets
Catalog- DV8 Assumes No Responsibility For Improperly Installed Brackets
- Keeps Use Of OEM Adaptive Cruise Control
- Economical Relocation Bracket
- Can Be Used With Any Bumper
- Attaches Inside The Grill
- Textured Powder Coat
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-250 Super Duty | King Ranch |
| 2017-2021 | Ford | F-250 Super Duty | Lariat |
| 2018-2021 | Ford | F-250 Super Duty | Limited |
| 2017-2021 | Ford | F-250 Super Duty | Platinum |
| 2017-2021 | Ford | F-250 Super Duty | XL |
| 2017-2021 | Ford | F-250 Super Duty | XLT |
| 2017-2021 | Ford | F-350 Super Duty | King Ranch |
| 2017-2021 | Ford | F-350 Super Duty | Lariat |
| 2018-2021 | Ford | F-350 Super Duty | Limited |
| 2017-2021 | Ford | F-350 Super Duty | Platinum |
| 2017-2021 | Ford | F-350 Super Duty | XL |
| 2017-2021 | Ford | F-350 Super Duty | XLT |
$1,099.99
DV8 truck bumpers are made with high tensile strength 3/16 inch steel and reinforced with 1/4 inch steel in key areas which allows them to accommodate up to a 12,500 lbs. winch. We also use a 2 step powder coating process. First the bumper is coated with a thick layer of a proprietary compound for corrosion resistance, then we coat the bumper with our textured black, UV resistant, scratch resistant powder coating. The result is a bumper that will look good and perform well for the lifetime of the vehicle. Key Features: Front Bumper, 2010-2014 Dodge Ram 2500/3500 5.7L V8, 6.7L, 1/4 inch and 3/16 inch Steel Construction, 2 Stage Powder Coat Finish, Accommodates Up to a 12,500 lbs. Winch, DV8 No Hassle Warranty, Lights Included.
Catalog- DV8 Assumes No Responsibility For Improperly Installed Brackets
- Keeps Use Of OEM Adaptive Cruise Control
- Economical Relocation Bracket
- Can Be Used With Any Bumper
- Attaches Inside The Grill
- Textured Powder Coat
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010 | Dodge | Ram 2500 | Laramie |
| 2010 | Dodge | Ram 2500 | Power Wagon |
| 2010 | Dodge | Ram 2500 | SLT |
| 2010 | Dodge | Ram 2500 | ST |
| 2010 | Dodge | Ram 2500 | SXT |
| 2010 | Dodge | Ram 2500 | TRX |
| 2010 | Dodge | Ram 3500 | Laramie |
| 2010 | Dodge | Ram 3500 | SLT |
| 2010 | Dodge | Ram 3500 | ST |
| 2013-2018 | Ram | 2500 | Big Horn |
| 2011-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2011-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2012-2016 | Ram | 2500 | Outdoorsman |
| 2011-2018 | Ram | 2500 | Power Wagon |
| 2011-2018 | Ram | 2500 | SLT |
| 2011-2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2011-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2011-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2011-2018 | Ram | 3500 | SLT |
| 2011-2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$1,499.99
High-clearance front bumper with integrated full skid plate. Accepts multiple winch sizes. Provisions for dual 3” pod lights and a 20” light bar behind the mesh panel. Includes welded D-ring mounts, high-and-tight wings for clearance, welded-in zip tie tabs, and aluminum-backed DV8 logo. Finished in micro-texture black powder coat with satin powder-coated Spec Series mesh.
Installation Instructions- High and tight wings to increase clearance while off-roading.
- Welded-in Zip Tie Tabs For Clean Wire Management
- Will not work with crossmember style lifts
- Provisions for a pair of 3” Pod Lights
- Compatible only with the ZR2 Trim level
- 20” Light Bar Mount behind Mesh Panel
- Satin Powder Coated Spec Series Mesh
- Integrated full front skid plate
- Micro-Texture Black Powder Coat
- Accepts Multiple Size Winches
- High Clearance Design
- Aluminum Backed Logo
- D-Ring Mounts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Chevrolet | Colorado | ZR2 |
$1,199.99
* Please Note: The bumper is not compatible with the ZR2 trim level, and it will not work with roller style fairleads. The bumper is not compatible with the factory fog lights.** Please Note: Minor cutting is required for installation.
Installation Instructions- Pair of 1” Thick D-Ring Mounts
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2025 | Chevrolet | Silverado 1500 | Custom |
| 2022-2025 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2022-2025 | Chevrolet | Silverado 1500 | High Country |
| 2022-2025 | Chevrolet | Silverado 1500 | LT |
| 2022-2025 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2022-2025 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2025 | Chevrolet | Silverado 1500 | PPV |
| 2022-2025 | Chevrolet | Silverado 1500 | RST |
| 2022-2025 | Chevrolet | Silverado 1500 | WT |
| 2022-2025 | Chevrolet | Silverado 1500 | ZR2 |
$1,299.99
Our Spec Series Front Bumper features aggressive styling, and provides improved ground clearance without any cutting required. At the center of the bumper behind the satin black mesh panel is a light mount suitable for the DV8 Elite 20 Single Row, Rigid SR 20, or Baja Designs S8 20 light bar. Additional supplemental lighting options are provided by dual 3-inch light pod mounts in each wing of the bumper. Recovery options for your truck includes 1-inch thick D-ring mounts that take -inch shackles, and a hidden winch mount. OEM parking sensors retain full functionality with our compatible sensor cutouts. This front bumper requires no drilling or modifications and features a fully bolt-on installation.
- Welded Zip-Tie Tabs for Clean Wire Management
- Micro-Texture Black Powder Coat Finish
- Retains Factory Parking Sensors
- Satin Black Accent Panel Finish
- (2) Dual 3 Pod Light Mounts
- Improves Ground Clearance
- 1 Thick D-Ring Mounts
- Bolt-On Installation
- 20 Light Bar Mount
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Chevrolet | Silverado 1500 | Custom |
| 2019-2021 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2021 | Chevrolet | Silverado 1500 | High Country |
| 2019-2021 | Chevrolet | Silverado 1500 | LT |
| 2019-2021 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2021 | Chevrolet | Silverado 1500 | LTZ |
| 2019-2021 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2021 | Chevrolet | Silverado 1500 | WT |
$1,299.99
The Spec Series Winch Front Bumper offers unparalleled style, performance, & protection for your Bronco. It was designed for serious rock crawling, featuring a low profile and an improved approach angle. The winch mount can fit a variety of different size winches. The Spec Series includes a heavy duty steel skid plate, a direct replacement to the stock skid plate. A tubular bull bar provides light brush protection for the winch & grille, and also features a light mount for up to a 13-inch single row light bar. A 20-inch light bar can be mounted behind the satin black accent plate at the center of the bumper. Each wing can take (2) 3-inch light pods, giving you plenty of lighting options. Installation is a simple, bolt-on process.
Catalog- Multiple light mounting options for additional lighting on the trail.
- The 20 mount in the bumper will only work with the following.
- Tube mount will only work with the following center lights.
- Provides (2) 1" thick D-ring mounts for 3/4" shackle.
- High clearance design for ultimate approach angles!!
- Includes HD skid plate offering extra protection.
- Welded-in zip tie tabs for wire management.
- Retains the use of factory sensors.
- Our slimmest/sleekest design yet!
- Perfect for Bronco Raptors too!
- Accepts multiple size winches.
- DV8 Elite 13 Single Row
- DV8 Elite 20 Single Row
- Baja Designs S8 10
- Baja Designs S8 20
- Rigid SR 10
- Rigid SR 20
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$899.99
The Bronco OE Plus is a Low-Profile Front Bumper for the 2021-2022 Ford Bronco. This was designed to fit the form of the Bronco as tight as the OEM bumper. The front panel was designed to match the grille of the higher-tier trim levels, although it looks excellent with the lower-tier trim levels as well. Behind this cutaway pattern, a Dual Row 20-inch LED light bar can mounted. It features pod light mounts on each side of the bumper, that fit 2 pods each.
CatalogInstallation Instructions
Installation Instructions
- COMPATIBLE WITH FACTORY PLASTIC AND METAL SKID PLATES
- WORKS WITH FACTORY PARKING SENSORS
- DOES NOT INTERFERE WITH 360 CAMERA
- 2-STAGE MICRO-TEXTURE POWDER COAT
- 4MM BODY AND 5MM MOUNTS/SUPPORTS
- 20 DUAL ROW LIGHT BAR MOUNT
- REINFORCED D-RING MOUNTS
- (4) 3 POD LIGHT MOUNTS
- 3 PIECE CONSTRUCTION
- 3-PIECE DESIGN
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2026 | Ford | Bronco | Badlands |
| 2021-2023,2025-2026 | Ford | Bronco | Base |
| 2021-2026 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2026 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2026 | Ford | Bronco | Outer Banks |
| 2022-2026 | Ford | Bronco | Raptor |
| 2025-2026 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
$29.99
Compatible with Many Other Bumpers with Hawse Styles Fairlead Mounts
Product Specifications SheetInstallation Instructions
- Compatible with Many Other Bumpers with Hawse Styles Fairlead Mounts
- Covers Fairlead Hole when Not Using a Winch
- Micro-Texture Black Powder Coat Finish
- Compatible with DV8 Bumpers
- Steel Construction
$109.99
Our Dash Mount provides solutions for mounting your digital devices at arms reach. Finished in a micro-texture black powder coat, and by following the contours of the dash, the dash plate complements the interior styling. M5 PEM nuts provide multiple options for you to locate your devices, such as your phone, GPS, tablet, & other gear. Compatible with RAM Mounts brand device holders, you can keep your gear secure & conveniently located both on and off the road.
- Built in cable slot to keep utilization of 12V plug. (tested multiple plus sizes)
- Multiple accessory amounts designed to be used with RAM diamond base mounts.
- Quick and Easy install (Minor drilling required)
- Slots to be used with 1/4 carriage bolts
- M5 pem nuts for accessory mounting
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | Sequoia | 1794 Edition |
| 2023-2026 | Toyota | Sequoia | Capstone |
| 2022-2026 | Toyota | Sequoia | Limited |
| 2022 | Toyota | Sequoia | Nightshade |
| 2022-2026 | Toyota | Sequoia | Platinum |
| 2022-2026 | Toyota | Sequoia | SR5 |
| 2022-2026 | Toyota | Sequoia | TRD Pro |
| 2022 | Toyota | Sequoia | TRD Sport |
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$49.99
The TJ replacement antenna is a stainless steel mast with e-coated black finish. OEM style grommet, cable and foam insulating cover. Includes new base cover with rubber gasket. Features: Replacement Antenna, Material: Stainless Steel, Finish: E-Coated, Color: Black, Sold As: Each, Fits: 1997-18 Jeep TJ.
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Jeep | Wrangler | 65th Anniversary Edition |
| 2003-2006 | Jeep | Wrangler | Rubicon |
| 1997-2004 | Jeep | Wrangler | Sahara |
| 1997-2006 | Jeep | Wrangler | SE |
| 1997-2006 | Jeep | Wrangler | Sport |
| 2004-2006 | Jeep | Wrangler | Unlimited |
| 2005-2006 | Jeep | Wrangler | Unlimited Rubicon |
| 2002-2006 | Jeep | Wrangler | X |
$149.99
Ever drive down the road and notice a little flutter in your Jeep's hood Have you replaced the stock, rubber hood hold downs that came with your Jeep DV8's race-inspired hood hold downs feature a billet aluminum turnbuckle and stainless steel helm joints. The quick-release push pin provides easy access to opening your hood and won't be lost thanks to the attached, stainless steel lanyard. Also available in a lockable version to help prevent any under-hood theft or tampering. Note: Designed to work with the stock fender and hood - may not work with all aftermarket hoods, fenders and fender flairs. Features: Hood Hold Downs, Location: Hood, Material: Billet Aluminum, Color: Black, Sold As: Pair, Fits: 2007-18 Jeep JK.
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Jeep | Wrangler | 65th Anniversary Edition |
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2003-2018 | Jeep | Wrangler | Rubicon |
| 1997-2004,2007-2017 | Jeep | Wrangler | Sahara |
| 1997-2006 | Jeep | Wrangler | SE |
| 1997-2006,2010-2018 | Jeep | Wrangler | Sport |
| 2016,2018 | Jeep | Wrangler | Sport S |
| 2004-2006 | Jeep | Wrangler | Unlimited |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2018 | Jeep | Wrangler | Unlimited Moab |
| 2005-2018 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2018 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2018 | Jeep | Wrangler | Unlimited Sport |
| 2016,2018 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2002-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$59.99
DV8 Off Road's shift knobs are made from billet aluminum and feature our patented 'Tired Tread' design grip which not only feels good when resting your hand on it, but also provides a better tactile feel when it comes time to throw a shift. Features: Shift Knob 'Tired Tread' Design Grip, Material: Billet Aluminum, Transmission: Automatic, Color: Black, Sold As: Each, Fits: 2011-18 Jeep JK.
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2011-2017 | Jeep | Wrangler | Rubicon |
| 2011-2017 | Jeep | Wrangler | Sahara |
| 2011-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2011-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2011-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2011-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$59.99
DV8 Off Road's shift knobs are made from billet aluminum and feature our patented 'Tired Tread' design grip which not only feels good when resting your hand on it, but also provides a better tactile feel when it comes time to throw a shift. Features: Shift Knob 'Tired Tread' Design Grip, Material: Billet Aluminum, Transmission: 6-Speed, Color: Black, Sold As: Each, Fits: 2011-18 Jeep JK.
CatalogThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2011-2017 | Jeep | Wrangler | Rubicon |
| 2011-2017 | Jeep | Wrangler | Sahara |
| 2011-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2011-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2011-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2011-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
Showing 150/175
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.