DV8 Off Road's shift knobs are made from billet aluminum and feature our patented 'Tired Tread' design grip which not only feels good when resting your hand on it, but also provides a better tactile feel when it comes time to throw a shift. Features: Shift Lever 'Tired Tread' Design Grip, Transmission: Automatic, Material: Billet Aluminum, Color: Black, Sold As: Each, Fits: 1997-06 Jeep TJ.

This Part Fits:

DV8 Off Road's shift knobs are made from billet aluminum and feature our patented 'Tired Tread' design grip which not only feels good when resting your hand on it, but also provides a better tactile feel when it comes time to throw a shift. Features: Shift Knob 'Tired Tread' Design Grip, Transmission: 6-Speed, Material: Billet Aluminum, Color: Black, Sold As: Each, Fits: 2007-10 Jeep JK.

This Part Fits:

Ever drive down the road and notice a little flutter in your Jeep's hood Have you replaced the stock, rubber hood hold downs that came with your Jeep DV8's race-inspired hood hold downs feature a billet aluminum turnbuckle and stainless steel helm joints. The quick-release push pin provides easy access to opening your hood and won't be lost thanks to the attached, stainless steel lanyard. Also available in a lockable version to help prevent any under-hood theft or tampering. Note: May not work with all aftermarket hoods, fenders and fender flairs. Features: Hood Hold Downs, Location: Hood, Material: Billet Aluminum, Color: Black, Sold As: Pair, Fits: 2018-Up Jeep JL.

This Part Fits:

DV8's JKBLJNT-01 is designed for rugged off-road use. DV8 uses SAE4140 chromoly steel studs and SAE1045 steel housings to make one of the toughest ball joints on the market. These ball joints are also greaseable which allows for standard maintenance and increased longevity. The grooves on the side of the housing are closer together resulting in superior resistance to turning that can occur and also helps makes the install easier. Details: SAE4140 and SAE1045 steel, Greaseable, 1-year limited Warranty, For Jeep JK Dana 44, Front and Rear.

• SAE4140 And SAE1045 Steel
• 1-Year Limited Warranty
• Greaseable

This Part Fits:

NHRA-approved, this quick release fire extinguisher mount is Baja-proven! It features CNC-machined 6061-T6 billet aluminum construction with a red, anodized, quick release pull knob. It can be installed in just about any location including under the seat and roll-bars. Also available in silver. Features: Fire Extinguisher Mount, Material: Billet Aluminum, Finish: Anodized, Color: Black, Sold As: Each.

This is the only mount on the market today that allows for an ARB twin compressor to be mounted inside the JL engine bay as it was meant to be! The mount comes with all hardware needed for install and is powder coated standard DV8 black. It will work with other our inner fenders or with the OEM inner fenders. The location of the bracket makes the install very easy and keeps the compressor out of harms way. Designed to mount the ARB twin compressor (CKMTA12) inside the engine bay of a Jeep JL! CMJL-01 Product Description: Easy to install and comes with all necessary hardware. Comes powder coated black (not pictured), Mounts the compressor out of the way, Eliminates the need to mount the compressor inside the cab where it is noisy and in the way, Can be used with both DV8 inner fenders or factory inner fenders, Standard DV8 warranty.

• Can Be Used With Both DV8 Inner Fenders Or Factory Inner Fenders
• Eliminates The Need To Mount The Compressor Inside The Cab
• Easy To Install And Comes With All Necessary Hardware.
• Comes Powder Coated Black (Not Pictured)
• Mounts The Compressor Out Of The Way
• Standard DV8 Warranty

This Part Fits:

Our Rear Storage Compartment provides improved space with 54% more volume and a sturdier design compared to the flimsy factory storage box. With increased capacity, you can store air hoses, recovery gear, and other equipment; or you can utilize it to hide your valuables from view. The compartment features an extra thick heat shield that helps reduce temperatures from the exhaust and outside heat that can damage your gear and valuables. For a quick and easy install process, it is fully bolt-on with no cutting or drilling required. Our storage compartment is made from high-quality steel and finished in a resilient micro-texture black powder coat for a durable design that matches your rigs factory styling.

• 54% More Storage Volume than the OEM Box
• Replaces the Flimsy Factory Storage Box
• Micro-Texture Black Powder Coat Finish
• Fully Bolt-On Installation
• Extra Thick Heat Shield
• Enhanced Storage Space
• Steel Construction

This Part Fits:

Our Air Compressor Mount & Storage Box provides a hidden & convenient location for mounting an ARB single or twin on-board air system compressor. A rubber grommet and access hole provides easy wire management access for the compressor. This system enables you to easily air up and down while on the trail without all the extra setup required for an external compressor system. Our larger box replaces the smaller OEM box, and installs easily to factory mounting points. In addition to the compressor mount, there is an additional storage compartment perfect for things like air hoses, recovery equipment, or tools. The provided heat shielding material insulates the container from heat radiating from the exhaust & external roadway temperatures. It also features a water resistant skin for ARB mounting holes.

• Hides the compressor in a convenient spot utilizing the factory mounting location.
• Can store additional equipment, air hoses, recovery equipment and more.
• Extra thick heat shield to reduce tempatures from exhaust/outside heat.
• Provides additional storage over the flimsy factory storage box.
• Drain plugs for easy clean out or to be used as ice cooler.
• Designed for ARB twin or single tube air compressors.
• Water resistant skin provided for ARB mounting holes.
• Rubber wire grommet included for easy wiring access.
• Features access for wiring solutions.

This Part Fits:

Our Molle Panels provide storage solutions for your daily gear and accessories. The top of each panel features M5 Pem nuts that are compatible with RAM Diamond Base Mounts and Bulletpoint 2-Bolt Mounts. The panels are also compatible with molle attachment systems for securing a wide range of gear. They allow for full adjustment of the front seats, and they dont interfere with the buttons, switches, compartments, shifter, or cup holders located within the center console area. They are made from steel and finished in a micro-texture black powder coat. The panels are quick and easy to install.

• M5 Pem Nuts Compatible w/ RAM Diamond Base Mounts & Bulletpoint 2-Bolt Mounts
• Allows for Full Adjustment of Front Seats
• Compatible w/ Molle Attachment Systems
• Micro-Texture Black Powder Coat Finish
• Retains Access to Center Console Area
• Multiple Mounting Solutions
• 3mm Steel Construction
• Molle Panel Design

This Part Fits:

Our Tundra Molle Panels & Digital Device Bridge provide efficient ways to keep your everyday items and handheld devices close and accessible. The driver & passenger side panels provide an excellent way to mount molle pouches, small tools, a holster, pocket light, and many other molle accessories.The bridge fits along the control panel, and does not interfere with any of your controls or cupholders. It?s fitted with 5 PEM nuts (M5 x 0.8) which are compatible with RAM diamond base digital device mounts, as well as other common brands. This bridge can mount your smartphone, GPS, tablet, radio, or other handheld devices in an easily accessible location. If you choose not to use the bridge, it can be easily removed while keeping the side molle panels in place.

• Multiple mounting options(pem nuts, molle mounts, clip mounts) Can be ran with or without bridge. Quick and Easy install
• Great for molle bags, knife mounts, radio mounts, phone mounts, gun holsters, med-kit accessories, and more!
• Pem nuts (M5x.08) on bridge designed to be used w/ RAM diamond base mounts or other bolt-on items
• Allows easy access to all factory buttons, switch, compartments, shifters, etc...
• Molle panels allows for full adjustment of front seats
• Direct fit, vehicle-specific design
• Molle accessory compatible

This Part Fits:

Improve your interior storage capabilities with our Center Console Molle Panels and Device Mount. You can mount multi-tools, med kits, sheaths, holsters, and other molle accessories to the driver and passenger side panels for quick access to your daily gear. You can also utilize clip mounts for attaching pouches and other supplies. The tops of the panels are equipped with M5 PEM nuts that are compatible with Bulletpoint and RAM Mounts for storing your smartphone, GPS, radio, or tablet in a convenient and accessible location.

• Compatible w/ Molle Accessories, Straps, & Clip Mounts
• Retains OEM Cup Holders & Passenger Side Grab Handle
• Compatible w/ Bulletpoint & RAM Mounts
• Micro-Texture Black Powder Coat Finish
• Driver & Passenger Side Panels
• 3.5mm Steel Construction

This Part Fits:

DV8 Offroad SL8 Slim Lights come with a clear polycarbonate lens and are IP68 rated to keep water and dirt out. They have both a spot and flood combo pattern with 5W Cree LED's rated to 50,000 hours, and use side or bottom mounts to attach to your vehicle. DV8 Offroad's LED Optical Technology and low-profile design make it a great choice for maximum light-output to illuminate the landscape while keeping a non-bulky presence.

• 100W Total 5W Per
• 7700 Lumens

This crossbar was designed to provide your Bronco additional mounting options for rear facing LED lights and speaker cans, or a speaker bar. The bar measures 29-inches in total length, and is 2-inches in diameter. There is a 10-inch slotted flat mount in the middle of the bar. 4 holes, 2 towards each end, allow you to run wiring hidden inside the bar. It is finished in a Micro-Texture Black Powder Coat, which blends well with the OEM trim. There are several possible configurations you can run. Two speaker cans with roll bar clamps can be installed, with up to a 6-inch light bar or two 3-inch pod lights on the flat mount. You can run a 20-inch light bar across the length of the bottom if utilizing the back rail mounts on the bar. Alternatively, a speaker bar up to 28-inches wide with roll bar clamps can be mounted across the bottom of the bar.

• DESIGNED FOR SPEAKER CANS OR A SPEAKER BAR WITH ROLL BAR CLAMP MOUNTS?
• Designed For Speaker Cans Or A Speaker Bar With Roll Bar Clamp Mounts
• 10" FLAT MOUNT FOR LIGHT BAR OR LIGHT PODS?
• 10 Flat Mount For Light Bar Or Light Pods
• 3MM PLATE STEEL & 2" X 1.5MM TUBE STEEL ?
• 3mm Plate Steel & 2 X 1.5mm Tube Steel
• MICRO-TEXTURE BLACK POWDER COAT?
• Micro-Texture Black Powder Coat
• 4 HIDDEN WIRING ACCESS POINTS?
• 4 Hidden Wiring Access Points
• INSTALLS TO OEM LOCATIONS?
• Installs To OEM Locations

This Part Fits:

The DV8 Elite Series slide brackets offers the ability to mount your light in just about any location. With our adjustable slide mounts, you can position the mounts almost the full width of the light as well as the angle. Our mounts include two brackets, rubber feet to prevent damage to painted or finished surfaces, and stainless hardware to last you through any type of weather.

• DESIGNED TO WORK WITH (BE52EW500W & BE13EW45W)

The DV8 Elite Series of LED Pod Lights are a perfect addition to your primary lighting when exploring in the dark. Amber lenses do not reflect against dust as much as clear lenses, offering improved visibility on dark & dusty trails. These new cube lights feature a bezel-less housing and small heat fins for a sleek and stylish finish. The OSRAM LEDs provide significant brightness and are rated to 50,000 hours. Our indirect reflector improves the direction of the light and reduces glaring and hotspots. The UV-resistant lens is shatterproof and designed to whisk away ice and water. These LED Lights have an IP68 rating - They are highly resistant to dust, dirt, sand and water.

• Shatterproof Polycarbonate UV Resistant Lens
• OSRAM P9 LEDs Rated at 50,000 Hours of Use
• IP68 Rated - Resistant to Water and Dust
• Weather-Resistant Plug with Pig Tail
• Bezel-less Housing with Heat Fins
• Flood Light Pattern
• Size: 3 x 3 x 2.75
• 3 Year Warranty
• 40 Total Watts
• 4,800 Lumens
• Amber Lens

The DV8 Elite Series of LED Pod Lights are a perfect addition to your primary lighting when exploring in the dark. These new cube lights feature a bezel-less housing and small heat fins for a sleek and stylish finish. The OSRAM LEDs provide significant brightness and are rated to 50,000 hours. Our indirect reflector improves the direction of the light and reduces glaring and hotspots. The UV-resistant lens is shatterproof and designed to whisk away ice and water. These LED Lights have an IP68 rating - They are resistant to dust, dirt, sand and water.

• 40 TOTAL WATTS
• 4,800 LUMENS

Our Elite Series 20-inch Amber Light Bar is a great solution for many of DV8s & other aftermarket in-bumper or bullbar light mounts. Amber light is great for high particle environments, such as dust, fog, rain, & snowy conditions. The light features a combo pattern of Flood & Spot lighting for an even spread of light in front of the vehicle. The indirect reflector focuses the direction of lighting while reducing glare and hot spots. The UV-resistant lens is shatterproof, in case debris is kicked up ahead of you on the trail. Additionally, it was designed to whisk away ice and water to keep your lighting optimal.

• IP68 Rated - Resistant to Water and Dust
• OSRAM LEDs Rated at 50,000 Hours of Use
• Shatterproof UV Resistant Lens
• Heat Fins to Shed Excess Heat
• Mixed with Polycarbonate Lens
• Flood/Spot Light Pattern
• Size: 20.5 x 2.0 x 1.5
• 105 Total Watts
• 8,800 Lumens

This DV8 Offroad Elite Series 20-Inch LED Light Bar is perfect for your bumper or hood light. It could be used to supplement your primary lighting, or used as a pair for your primary trail lighting. The housing is bezel-less, giving it a streamlined style. It also features heat fins to reduce ambient heat. The OSRAM LEDs provide a significant amount of lighting at 8,800 lumens. These are rated to 50,000 hours of life. The indirect reflector focuses the direction of the light and reduces glare and hotspots. Our UV-resistant lens is shatterproof and designed to whisk away ice and water. This light bar has an IP68 rating - Signifying they are resistant to dust, dirt, sand and water.

• 105 TOTAL WATTS
• 8,800 LUMENS

** Please Note: Proper wiring is necessary for safe usage of the light bar.*** Please Note: The light comes with driving and offroad mode. To switch modes: Turn on the light and wait for 2 seconds, then turn off/on the light 3 times within 5 seconds and the light will turn to off-road mode. The light will remain in the last mode it was in when turned off.

• 8,820 Lumens (RAW)

The DV8 Offroad Elite Series 20-Inch Dual Row LED Light Bar is a great choice for trail lighting. Powered by 200 Watts, it produces 16,800 raw lumens of light. The low profile bezel-less housing features heat fins to reduce ambient heat. The light bar can be mounted at the sides with the provided brackets, or along the back rail by using The DV8 Offroad Large Elite Series Light Bar Mounts. The OSRAM LEDs are rated to 50,000 hours of life. An indirect hooded reflector focuses the direction of the light and reduces glare and hotspots. Our UV-resistant lens is shatterproof and designed to whisk away ice and water. This light bar has an IP68 rating, signifying it is resistant to dust, dirt, sand and water.

• IP68 RATED - RESISTANT TO WATER AND DUST
• SIZE: 21.5 inch X 2.75 inch X 2.65 inch
• OSRAM LEDS RATED AT 50,000 HOURS OF USE
• BEZEL-LESS HOUSING WITH HEAT FINS
• FLOOD/SPOT COMBO LIGHT PATTERN
• SHATTERPROOF UV RESISTANT LENS
• SATIN BLACK POWDER COAT FINISH
• Size: 21.5 X 2.75 X 2.65
• 16,800 RAW LUMENS
• LUX@10M: 2319
• 200W

This DV8 Offroad Elite Series 13-Inch LED Light Bar is perfect for your bumper or hood light. Its great for supplementing your primary lighting. The housing is sleek and bezel-less, and it also features heat fins to reduce ambient heat. The OSRAM LEDs provide a significant amount of lighting at 3,800 lumens, and are rated to 50,000 hours of life. The indirect reflector focuses the direction of the light, reduces glare, and virtually eliminates hotspots. Our UV-resistant lens is shatterproof and designed to whisk away ice and water. This light bar has an IP68 rating - Signifying they are resistant to dust, dirt, sand and water.

• 45 TOTAL WATTS
• 3,800 LUMENS

These Replacement LED Fog Lights for Jeep JL and Jeep Gladiatorare designed and developed in the USA to replace the factory fog lights, and to compliment your LED headlights.These lights go through strict quality control testing for LED function, water tightness, and are measured to ensure that each light is built to specification.Their housing is the same size as the factory housing and features a connector that is ready to be connected into the factory wiring. If you are running an aftermarket bumper and need fog lights or just want to upgrade your stock bumper, these lights are a great option.

• Tested And Qc Approved
• Excellent Crisp Light
• Fits In OEM Location
• Easy Install

This Part Fits:

Due to the factory front camera placement, the front camera view is partially blocked by aftermarket winch front bumpers. Our front camera relocation bracket for the 6th Gen Bronco enables you to maintain an unobscured view from your front camera. This also helps you maintain a full view of the 360 camera feature. The bracket is adjustable, allowing you to run different setups. This relocation bracket is compatible with all DV8 Bronco winch bumpers, and we?ve also confirmed fitment on ADD Bronco winch bumpers. Please verify fitment if running another manufacturer?s winch bumper. The kit includes an extended camera optical cable and spray hose.

• Fits all DV8 and ADD Bronco winch front bumpers (Verify fitment on other manufactures bumpers)
• Relocates front camera for full visibility if running winch style front bumper.
• Comes with extended camera optical cable and spray hose.
• Adjustable for multiple different setups.
• Corrects 360 view and front camera view.
• Only usable on winch style bumpers.

This Part Fits:

If you're looking to run tires larger than stock, our 3rd brake light bracket extension allows you to mount up to a 38-inch spare tire and retain your center brake light. The bracket elevates the Bronco's OEM 3rd brake light above larger spare tires. This also keeps your ride in compliance with certain states' laws requiring a clearly visible center brake light.

• BOLT-ON INSTALLATION - NO CUTTING OR DRILLING
• ACCOMMODATES UP TO 38" SPARE TIRE
• MICRO-TEXTURE BLACK POWDER COAT?
• Accommodates Up To 38 Spare Tire
• Micro-Texture Black Powder Coat
• UTILIZES FACTORY WIRING
• 4MM STEEL

This Part Fits:

The DV8 Offroad ABBR-01 is a relocation bracket for the adaptive cruise control module in equipped 2021+ Ford Broncos. Manufactured from steel and protected with a powder coat finish, the bracket relocates the module for better clearance and operation.

• RELOCATES ACC SENSOR MODULE TO RETAIN FUNCTIONALITY WITH MOST AFTERMARKET BUMPERS
• 2-STAGE MICRO-TEXTURE POWDER COAT

This Part Fits: