Fits select 2000-2005 Ford Excursion and 2001-2004 Ford F-250/F-350 Super Duty 2WD models.

The Fabtech K2098M 6-inch Basic Lift System provides a cost-effective solution for increasing ground clearance and tire capacity on your 2WD Ford Super Duty or Excursion. This system is specifically engineered for the budget-minded enthusiast who wants a significant lift without the complexity and cost of replacing major suspension geometry. By utilizing the factory stock radius arms, this kit simplifies the installation process while maintaining structural integrity.

Included in this system are Fabtech Stealth series shocks. These monotube shocks are designed to provide superior damping over stock units, offering a more controlled ride on the street and reliable performance during light off-road use. Every component in this kit is the result of extensive research and rigorous testing, ensuring a trouble-free fitment that bolts directly to your vehicle's factory mounting points.

• 6-inch lift height for increased ground clearance and larger tire fitment
• Includes Fabtech Stealth monotube shocks for improved ride quality
• Retains factory radius arms for a simplified, budget-friendly installation
• Complete system including all necessary hardware for a full installation
• Precision-engineered components finished for durability and corrosion resistance
• Manufacturer Part Number: K2098M

Fits 2000-2005 Ford Excursion and 2001-2004 Ford F-250/F-350 Super Duty 2WD models.

The Fabtech 6-inch Basic System is an engineered suspension solution for the budget-minded enthusiast looking to increase ride height without sacrificing front-end geometry. This system utilizes the vehicle's factory I-beams and radius arms, relocating them with heavy-duty 1/4-inch thick steel brackets. By combining these relocation brackets with extended-length coil springs, Fabtech achieves a full 6 inches of lift while maintaining proper alignment specifications.

This comprehensive kit includes a drop pitman arm to correct steering geometry and a rear block kit to level the vehicle's stance. To ensure consistent ride quality and control, the system comes complete with front and rear Fabtech Performance Shocks specifically valved for this application.

• Includes front and rear Fabtech Performance Shocks
• Heavy-duty 1/4-inch thick steel relocation brackets
• Extended-length front coil springs for 6 inches of lift
• Drop pitman arm for steering correction
• Rear block kit and necessary hardware included
• Retains factory radius arms and I-beams
• Manufacturer Part Number: K2098

Fits select 1999-2000 Ford F-250 and F-350 Super Duty 2WD models (Gas / 6.0L Diesel).

The Fabtech K2097M 6-inch Basic Suspension Lift System provides a reliable and cost-effective solution for Ford Super Duty owners looking to increase ground clearance and accommodate larger wheel and tire packages. Designed for the budget-minded enthusiast, this system utilizes the factory radius arms to maintain suspension geometry while achieving a full 6 inches of lift.

This kit features Fabtech Stealth shocks, which are built with a 46mm high-flow piston and vehicle-specific valving to ensure a controlled ride on and off the road. Every component is engineered to provide a straightforward installation that integrates with the vehicle's OE mounting points.

• Manufacturer Part Number: K2097M
• Lift Height: 6 inches
• Shock Type: Fabtech Stealth (Monotube-style)
• Compatible with factory radius arms
• Retains factory steering geometry and ride quality
• Includes all necessary installation hardware

Fits 1999-2000 Ford F-250 and F-350 Super Duty 2WD models (Gas / 6.0L Diesel).

The Fabtech 6-inch Basic System is a heavy-duty lift solution engineered to increase ride height while maintaining proper front suspension geometry. This kit utilizes the vehicle's factory I-beams and radius arms, relocating them with high-strength 1/4-inch thick steel brackets. To achieve the 6-inch lift, the system includes extended-length front coil springs that provide the necessary clearance without compromising structural integrity.

Designed for durability and steering precision, the kit includes a drop pitman arm to correct drag link angles and front and rear Fabtech Performance Shocks. These shocks are specifically valved for the Super Duty platform to improve damping and ride control. The rear of the vehicle is lifted via a block kit to achieve a level, aggressive stance.

• Manufacturer Part Number: K2097
• Lift Height: 6 Inches
• Heavy-duty 1/4-inch thick steel relocation brackets
• Extended-length front coil springs
• Drop pitman arm for steering geometry correction
• Front and rear Fabtech Performance Shocks included
• Rear block kit for level stance
• Compatible with stock I-beams and radius arms

Fits 2005-2007 Ford F-250 Super Duty 2WD models (V10 and Diesel).

The Fabtech 6-inch Basic Lift System (K2060M) provides a significant height increase for your 2WD Super Duty while maintaining factory ride characteristics. This system is specifically engineered for owners seeking a reliable, budget-friendly lift solution that accommodates larger tires and improves ground clearance without requiring extensive modifications to the suspension geometry.

This kit utilizes the stock radius arms, retaining the original pivot points for a straightforward installation. To manage the increased ride height, the system includes Fabtech Stealth monotube shocks, which feature a 46mm piston and nitro-carburized piston rod for superior durability and damping control compared to standard twin-tube shocks.

• 6-inch lift height for increased tire and ground clearance
• Retains factory radius arms for simplified installation and consistent geometry
• Includes Fabtech Stealth monotube shocks for improved damping and heat dissipation
• Specifically tuned for V10 and Diesel 2WD configurations
• High-quality construction designed for long-term off-road and street use
• Manufacturer Part Number: K2060M

Fits 2005-2007 Ford F-250 Super Duty 2WD models equipped with V10 or Diesel engines.

The Fabtech K2060 Basic System is engineered for drivers seeking a 6-inch increase in ride height while maintaining proper suspension geometry. This kit utilizes the vehicle's factory I-beams and radius arms, relocating them with heavy-duty 1/4-inch thick steel brackets to preserve alignment specs. The system features extended-length front coil springs to provide the lift and a rear block kit to level the stance. To ensure controlled damping, Fabtech includes a full set of front and rear Performance Shocks specifically valved for this application.

• 6-inch front lift height via extended coil springs
• Heavy-duty 1/4-inch thick relocation brackets for I-beams and radius arms
• Includes drop pitman arm for steering correction
• Front and rear Fabtech Performance Shocks included
• Rear lift block kit with hardware
• Designed for 2WD Super Duty models with V10 or Diesel powerplants
• Manufacturer Part Number: K2060

The Fabtech Universal Angled Spare Tire Mount (FTT10002BK) provides a secure, space-efficient solution for carrying an oversized spare in any truck bed. Designed for versatility, this mount can be positioned anywhere in the bed to suit your cargo layout, providing a clean and functional alternative to factory under-chassis storage.

• Durable Construction: Built using 1 1/4-inch steel tubing with MIG-welded joints for maximum structural integrity and long-lasting durability in off-road environments.
• Tire Capacity: Engineered to securely hold a full-size spare tire measuring up to 35 inches in diameter.
• Installation: Requires drilling only four holes for a permanent and stable mount to the truck bed floor.
• Finish: Finished in a resilient black coating to resist corrosion and wear.

Whether you are outfitting a chase truck or simply need a accessible spare for the trail, this angled carrier offers a professional-grade mounting solution. Part Number: FTT10002BK.

The Fabtech FTT10001BK Universal Spare Tire Flat Mount provides a versatile and secure solution for carrying a full-size spare tire in your truck bed. Designed for universal application, this mount allows you to position your tire anywhere in the bed to optimize cargo space or weight distribution.

This flat mount features a durable base plate that offers two distinct installation methods. You can bolt the plate directly to the top of the bed floor for a permanent mounting point, or install the plate underneath the bed floor. The sub-mount option provides a clean, factory look, allowing you to remove the tire carrier without leaving visible mounting hardware behind. Installation is straightforward and requires drilling four holes to secure the assembly to the vehicle.

• Manufacturer Part Number: FTT10001BK
• Mounting Type: Universal Flat Mount
• Finish: Black powder coat
• Installation: Requires drilling four holes
• Flexibility: Can be surface-mounted or sub-mounted for a hidden look

Fits select 1991-2004 Ford F-250/F-350 Super Duty, Chevrolet/GMC C2500/C3500, and C2500 Suburban.

The Fabtech FTSBK5 5-inch Rear Leaf Spring Block Kit provides a reliable way to increase the rear ride height of your truck or SUV. Designed for the budget-conscious enthusiast, this kit installs directly between the axle housing and the leaf spring pack to facilitate 5 inches of lift. This setup is ideal for leveling out a vehicle with a front lift kit or for gaining the necessary clearance for larger tire and wheel packages while maintaining the factory ride quality of the OE leaf springs.

• Provides 5 inches of additional rear lift height
• Compatible with heavy-duty leaf spring applications
• Engineered for precise fitment between axle pad and spring pack
• Straightforward bolt-on installation process
• Manufacturer Part Number: FTSBK5

Fits select 1980-2004 Chevrolet, GMC, Ford, and Dodge trucks and SUVs.

The Fabtech FTSBK4 4-inch Rear Leaf Spring Block Kit provides a reliable and cost-effective way to raise the rear ride height of your vehicle. Ideal for leveling out the stance after a front suspension lift or for gaining additional ground clearance, these blocks are designed for straightforward installation between the rear axle and the leaf spring pack. This kit is engineered for enthusiasts seeking functional performance without unnecessary complexity.

• Lift Height: 4 inches
• Position: Rear
• Design: Tapered or straight block configuration for leaf spring applications
• Installation: Bolts between axle housing and leaf springs
• Manufacturer Part Number: FTSBK4

Fits select 1983-2005 Chevrolet, GMC, Ford, and Dodge trucks and SUVs, including C1500/C2500, Ram 1500, Ranger, and F-Series Super Duty models.

The Fabtech FTSBK3 Rear Leaf Spring Block Kit provides a straightforward and cost-effective method to raise the rear of your vehicle by 3 inches. By spacing the factory leaf springs from the axle, these blocks allow for increased tire clearance and a leveled stance without the complexity or expense of a complete replacement leaf pack. Designed for the budget-conscious enthusiast, this kit maintains the factory ride quality while providing the lift needed for larger wheel and tire combinations.

• Lift Height: 3 inches
• Position: Rear axle
• Compatibility: Designed for vehicles with leaf spring rear suspensions
• Installation: Facilitates a direct-fit install between the axle pad and leaf spring
• Manufacturer Part Number: FTSBK3
• Includes: Rear lift blocks and installation instructions

Fits select 1991-2008 Chevrolet/GMC C2500 and C3500, Dodge Ram 2500, Ford Excursion, F-150, F-250, and Ranger.

This Fabtech Rear Leaf Spring Block Kit (FTSBK2) provides a reliable 2-inch lift to the rear of your vehicle by mounting between the factory axle housing and the leaf springs. Engineered as a cost-effective solution for enthusiasts looking to level their stance or accommodate larger tire sizes, these blocks help restore ride height or add clearance without sacrificing ride quality. The components are designed for a straightforward installation, making this an ideal upgrade for trucks and SUVs requiring additional rear altitude for towing, hauling, or off-road use.

• Provides 2.0 inches of rear lift height
• Designed to fit between the axle and leaf spring pack
• Restores rear stance or levels vehicle after front-end lift
• Durable construction for long-term suspension stability
• Compatible with factory-style U-bolts and hardware
• Manufacturer Part Number: FTSBK2

Fits 1998-2008 Ford Ranger 2WD models with coil spring front suspension.

Fabtech Upper Control Arms are engineered to provide increased strength and improved alignment geometry for Ford Ranger models with coil spring front suspensions. These arms are a direct replacement for factory units, specifically designed to correct caster issues common with leveling kits. By utilizing heavy-duty chromoly tubing, these arms significantly reduce the flex found in stock components, resulting in a more positive and predictable road feel.

This kit replaces the weak factory upper ball joints with 1-inch ID stainless American uniballs for maximum durability. The included 4340 heat-treated uniball pins are precision-tapered to seat into the factory spindle without modification, allowing for a straightforward installation or a return to stock if necessary. When paired with Dirt Logic 2.5 coilover shocks, these arms allow for increased wheel travel for improved off-road performance.

• Constructed from high-strength chromoly tubing to eliminate arm flex
• Includes 1-inch ID stainless American uniballs for superior joint strength
• 4340 heat-treated uniball pins fit factory spindle tapers
• Built-in additional caster to aid in alignment for leveled vehicles
• Compatible with Dirt Logic 2.5 coilovers for increased travel
• Manufacturer Part Number: FTS98100-6BJ

Fits select 2006-2018 Dodge and Ram 1500 models equipped with a 6-inch lift kit.

The Fabtech FTS98028 Front Sway Bar End Link Bushing Kit is engineered to maintain proper suspension geometry and sway bar operation on lifted 4WD applications. Specifically designed for trucks running a 6-inch lift, these bushings replace worn or fatigued components that can lead to excessive body roll and vague steering response. This kit ensures your front anti-roll system stays properly articulated, providing the stability and control required for both on-road and off-road driving.

• Specifically designed for use with 6-inch suspension lift kits
• Restores front sway bar geometry and handling performance
• Replaces worn factory or lift-kit bushings to eliminate slop in the end links
• Durable construction to withstand the increased leverage of lifted suspension setups
• Includes necessary bushings for a complete front service
• Manufacturer Part Number: FTS98028

Fits select 1984-2023 Toyota 4Runner, Tacoma, and FJ Cruiser.

Reinforce your vehicle's front suspension with the Fabtech Extra Large Diameter Front Sway Bar End Link Kit. Engineered as a heavy-duty replacement for factory components, these end links utilize a larger diameter design to provide superior strength and stability compared to OE parts. This kit is particularly effective for vehicles with suspension lifts or those subjected to demanding off-road conditions where factory links are prone to bending or failure.

By maintaining proper sway bar geometry and reducing flex under load, these links help restore steering response and minimize body roll. This kit includes all necessary hardware for a straightforward installation into factory mounting locations.

• Manufacturer Part Number: FTS98024
• Design: Extra-large diameter for increased structural integrity
• Placement: Front axle sway bar
• Construction: Heavy-duty materials for long-term durability in off-road environments
• Fitment Type: Vehicle-specific replacement for 1984-2023 Toyota platforms

Fits select 2007-2017 Chevrolet Silverado 1500, Suburban, Tahoe, Avalanche, and GMC Sierra 1500, Yukon, and Yukon XL.

The Fabtech FTS98023 Shock Extension Bushing Kit is engineered to maintain the performance and reliability of your lifted or leveled GM 1500 series truck. These bushings are designed to replace worn components within the shock extension assembly, restoring proper dampening and preventing unwanted suspension noise or vibration. Whether you are performing routine maintenance or refreshing an older lift kit, these bushings ensure your shocks remain securely mounted and correctly aligned.

• Direct replacement bushings for Fabtech shock extension systems
• Precision engineered for GM 1500 chassis fitment (2007-2017)
• Durable construction to withstand road salt, moisture, and debris
• Restores factory-like suspension feel and eliminates mounting play
• Manufacturer Part Number: FTS98023

Fits select 2011-2017 Chevrolet Silverado/GMC Sierra 2500/3500 HD and 2009-2015 Dodge/Ram 1500.

Restore the precision and responsiveness of your truck’s front-end geometry with the Fabtech FTS98019 Upper Control Arm Replacement Bushing Kit. These bushings are designed to replace worn factory components, eliminating excessive play that leads to wheel hop and imprecise steering. By utilizing high-quality black polyurethane, this kit offers superior durability and resistance to road chemicals and oils compared to standard rubber bushings.

Properly functioning bushings are critical for maintaining caster and camber settings during suspension travel. This kit is engineered to provide the stiffness required for improved cornering control while ensuring a quiet, trouble-free ride for off-road enthusiasts and daily drivers alike.

• Manufacturer Part Number: FTS98019
• Material: High-durometer black polyurethane
• Replaces worn bushings in Fabtech upper control arms
• Improves steering response and handling characteristics
• Helps maintain alignment and reduces wheel hop
• Built for long-term durability in demanding environments

Fits select 2001-2023 Chevrolet Silverado, GMC Sierra, Ford F-150, Toyota Tacoma, and FJ Cruiser models.

Fabtech Upper Control Arm Bearing Kits are engineered to restore and maintain your vehicle's steering and handling precision. These kits are designed to replace worn components within the suspension system, ensuring that your vehicle remains in top form during both street driving and off-road use. By utilizing high-quality materials and precise tolerances, Fabtech helps you maintain proper caster and camber alignment for better tire wear and predictable tracking.

• Manufactured from high-quality black polyurethane for long-lasting performance
• Reduces wheel hop and increases cornering control
• Helps maintain proper caster and camber settings
• Restores factory steering feel and handling characteristics
• Engineered for a trouble-free installation and durable service life
• Manufacturer Part Number: FTS98015

Proper design in suspension development is essential for a high-performing vehicle. Fabtech leverages over 20 years of experience and rigorous testing to ensure their components meet the needs of discerning off-road enthusiasts.

Fits Ford F250, F350, F450, and F550 Super Duty models. The Fabtech FTS98014 Uniball Bearing Kit is designed to provide heavy-duty articulation and durability for high-performance suspension systems. Engineered as a direct replacement or upgrade for suspension components, this kit utilizes high-grade materials to maintain chassis integrity under demanding off-road conditions.

The core of this kit is a PTFE-lined uniball, which offers significant strength advantages over standard ball joints. The PTFE (Polytetrafluoroethylene) liner provides a self-lubricating, low-friction surface that ensures smooth suspension cycling while resisting the ingress of dirt and debris that can lead to premature wear.

• PTFE-lined uniball for reduced friction and increased service life
• Heavy-duty construction for superior strength in off-road applications
• Designed for select Ford Super Duty F250/F350/F450/F550 models
• Manufacturer Part Number: FTS98014

Fits Ford F250, F350, F450, and F550 Super Duty trucks.

Maintain front-end stability and suspension alignment with the Fabtech FTS98012 Radius Arm Bushing Kit. Over time, factory bushings can degrade from constant road vibration and heavy-duty use, leading to steering wander, clunking, and decreased ride quality. This kit provides durable replacement bushings designed to restore suspension precision and maintain proper axle control under load.

• Engineered to restore original suspension geometry and front-end stability
• High-durability material construction to withstand heavy-duty towing and off-road stress
• Designed for precise fitment in the radius arm assembly
• Manufacturer Part Number: FTS98012

Fits 1995-2013 Toyota Tacoma models, including Base, DLX, Limited, Pre Runner, S-Runner, SR5, and X-Runner. This heavy-duty tie rod end assembly is engineered to address the inherent weaknesses of factory components when subjected to the stress of oversized tires and off-road terrain.

Forged for superior strength, these extra-large diameter tie rods are designed to resist bending and breakage where OEM units often fail. As a direct replacement for the factory hardware, the Fabtech FTS96005 installs quickly without requiring any modifications to the vehicle's centerlink or steering knuckles. It is a critical upgrade for drivers looking to maintain steering precision and extend service life on modified or frequently driven off-road Tacomas.

• Manufacturer Part Number: FTS96005
• Direct replacement for weak factory tie rod ends
• Extra-large forged diameter for maximum resistance to bending
• Compatible with oversized wheel and tire combinations
• No modifications required to knuckles or centerlink
• Sold individually

Fits 2004-2013 Nissan Titan (LE, PRO-4X, S, SE, SL, SV, XE).

Maintain the handling and stability of your vehicle with the Fabtech Front Sway Bar End Link Kit. Designed as a direct-fit replacement for worn or damaged factory components, these end links restore the vital connection between the sway bar and the suspension system. By properly transferring load, these links help control body roll and improve overall cornering performance in both street and off-road environments.

• Direct replacement for factory front sway bar end links
• Restores handling precision and reduces body roll
• Specifically engineered for 2004-2013 Nissan Titan geometry
• Manufacturer Part Number: FTS95003

Fits 2006-2007 Dodge Ram 1500 (Laramie, SLT, Sport, SRT-10, ST, and TRX4).

The Fabtech FTS93011 Heavy Duty Tie Rod End is engineered as a robust upgrade over factory components, specifically designed to address the steering demands of late-model trucks. Rather than a standard replacement, this heavy-duty unit enhances steering strength and extends service life, particularly on vehicles equipped with larger tire and wheel packages or aftermarket suspension systems.

Fabtech utilizes advanced design software and rigorous testing to ensure this tie rod end maintains proper steering geometry and withstands off-road stress. This component replaces worn OE hardware with a higher-tolerance part, providing the reliability needed for both daily driving and discerning off-road use.

• Direct heavy-duty upgrade for factory tie rod ends
• Improves steering system strength and durability
• Precision-engineered for 2006-2007 Ram 1500 steering geometry
• Manufacturer Part Number: FTS93011

Fits 2002-2005 Dodge Ram 1500 (ST, SLT, Laramie, and SRT-10).

The Fabtech FTS93010 Heavy-Duty Tie Rod End is engineered as a direct-fit upgrade to improve steering strength and extend the service life of your vehicle's steering linkage. Unlike standard replacement parts, this tie rod end is built to handle the added stresses of off-road use and larger wheel/tire combinations, providing the durability needed for the discerning enthusiast.

• Heavy-duty construction provides a significant strength upgrade over factory components.
• Designed to improve steering response and reliability in demanding conditions.
• Precision-engineered for the 2002-2005 Dodge Ram 1500 chassis.
• Direct replacement for worn factory tie rod ends.
• Manufacturer Part Number: FTS93010

The Fabtech FTS93009 Rear Sway Bar End Link Kit is engineered to restore proper sway bar geometry and functionality on Ford F-250, F-350, and Excursion models equipped with 6, 8, or 10-inch lift kits.

When a vehicle is significantly lifted, factory sway bar links become too short, pulling the sway bar out of its ideal operating angle and compromising roll control. This kit replaces the factory links with two offset, extended-length units designed to accommodate increased ride height. These links are built to maintain stability and ensure the suspension operates correctly under heavy use.

• Compatible with Ford F-250, F-350, and Excursion (6, 8, and 10-inch suspension systems)
• Includes two offset, extended-length link ends
• High-grade urethane bushings for increased durability and response
• Restores proper sway bar geometry for improved roll control
• Manufacturer Part Number: FTS93009

Fits select 2005-2019 Ford F-250 and F-350 Super Duty 4WD models.

Correct your vehicle's steering geometry after installing a suspension lift with the Fabtech FTS92011 Dropped Pitman Arm. When a truck is lifted, the angle of the drag link increases, which can lead to bump steer and reduced steering feedback. This dropped pitman arm restores the proper drag link alignment, ensuring consistent handling and reduced stress on steering components.

Fabtech engineers these pitman arms to exceed the strength of factory units. Utilizing advanced forging techniques and precision CNC machining, the FTS92011 provides a secure, zero-play fitment on the steering box output shaft. It is a critical component for maintaining driveability and safety on lifted Super Duty applications.

• Corrects steering geometry and drag link angles on lifted trucks
• Forged construction for superior strength over OE cast units
• Precision CNC machined for an exact fit
• Helps eliminate bump steer and improves steering response
• Manufacturer Part Number: FTS92011

Fits select 2001-2010 Chevrolet Silverado 1500/2500 HD and GMC Sierra 1500/2500 HD models.

The Fabtech Front Sway Bar End Link Kit is engineered to restore proper sway bar geometry on vehicles equipped with significant suspension lifts. These extended-length links replace the factory components, ensuring the sway bar operates at the correct angle to maintain stability and control. Designed for heavy-duty use, the kit features an offset link design and high-durability urethane bushings to handle the increased articulation and stress of lifted applications.

• Compatible with 6-inch, 8-inch, and 10-inch suspension systems
• Offset extended length design corrects sway bar alignment for lifted trucks
• Durable urethane bushings replace soft factory rubber for improved response
• Designed for direct replacement of OE links on select GM 1500 and 2500 HD models
• Manufacturer Part Number: FTS91001

Fits select 2005-2015 Ford F-250 and F-350 Super Duty 4WD models.

Elevate your heavy-duty Ford's off-road performance with the Fabtech Dirt Logic 4.0 Front Reservoir Coilover. Specifically engineered for trucks equipped with an 8-inch lift, this 4.0-inch diameter coilover provides exceptional damping and high-capacity heat management. The shock body is constructed from 304 stainless steel with a machine finish for superior corrosion resistance, ensuring it stands up to road salt and trail debris better than traditional plated shocks.

The Dirt Logic 4.0 system includes a remote reservoir crafted from black anodized 6061 aluminum, which facilitates rapid heat dissipation to prevent shock fade during aggressive cycling. For maximum durability, the piston rod is made from NitroSteel, a material significantly harder and more corrosion-resistant than standard chrome. To ensure a quiet yet capable ride, Fabtech utilizes spherical bearings at both ends, protected by urethane misalignment cups that isolate vibration and road noise from the chassis.

• Fits 2005-2015 Ford F-250/F-350 Super Duty 4WD with 8" lift systems
• Large 4.0" diameter 304 stainless steel shock body
• Remote reservoir made from black anodized 6061 aluminum
• Ultra-hard NitroSteel piston rod for longevity
• Billet aluminum top cap and rod ends
• Spherical bearings with urethane misalignment cups to reduce rattle
• High-quality coil spring preset with correct preload
• Sold individually (Single)
• Manufacturer Part Number: FTS835012

Fits select 2005-2017 Ford F-250 and F-350 Super Duty 4WD trucks. This Fabtech Dirt Logic 2.25 N/R (Non-Reservoir) front shock absorber is engineered to provide superior dampening for vehicles equipped with Fabtech suspension systems. Designed with high-grade 304 stainless steel bodies, these shocks offer maximum corrosion resistance and a machine finish for long-lasting durability and appearance.

Each shock features a NitroSteel piston rod, which provides a significantly harder surface and better corrosion resistance than traditional chromed rods. The Dirt Logic 2.25 series is equipped with urethane bushings at the mounting points to isolate road noise and eliminate the rattling often associated with spherical bearings, ensuring a quiet and controlled ride on or off the road.

• Manufacturer Part Number: FTS810382
• 2.25-inch diameter 304 stainless steel shock body
• NitroSteel high-durability piston rod
• Billet aluminum top cap and rod end
• Urethane bushings for reduced road noise and vibration
• Direct-fit application for specific Ford Super Duty 4WD configurations

Fits select 2011-2026 Ford F-250 and F-350 Super Duty 4WD models.

The Fabtech Dirt Logic 2.25 N/R (Non-Reservoir) shock absorber is engineered to provide superior dampening and exceptional corrosion resistance for heavy-duty applications. Each shock features a high-grade 304 stainless steel body with a finely detailed machine finish, ensuring it can withstand harsh environments while maintaining a premium appearance. To enhance durability, the piston rod is constructed from NitroSteel, a material significantly harder and more corrosion-resistant than standard chrome.

Specifically tuned for the Ford Super Duty chassis, these shocks utilize billet 6061 aluminum top caps and rod ends for structural integrity. Unlike shocks using spherical bearings that can transfer road noise and vibration, the Dirt Logic 2.25 series features high-quality urethane bushings at the mounting points to ensure a quiet, rattle-free ride on and off the road.

• 304 Stainless steel shock body for maximum corrosion resistance
• NitroSteel piston rod for increased hardness and longevity
• Billet 6061 aluminum top cap and rod ends
• Urethane mounting bushings to reduce road noise and vibration
• Direct fit for 2011-2026 Ford F-250/F-350 Super Duty 4WD
• Manufacturer Part Number: FTS810052