Fits select 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (0-6" Lift).

The JKS Manufacturing JKSOGS121 adjustable front track bar is a critical upgrade for lifted Wranglers, allowing you to precisely center the axle housing under the chassis. By restoring correct geometry, this track bar prevents undue stress on steering and suspension components while improving handling characteristics. The variable length design accommodates everything from stock height to 6-inch lift kits.

Engineered for extreme off-road durability, the bar is constructed from 1.5-inch diameter DOM tubing with a massive 3/8-inch wall thickness. It features 1-1/4-inch fine threads for ultra-precise axle positioning and utilizes CNC-bent OE-style geometry for maximum clearance. To maintain ride quality, JKS equips both ends with heavy-duty rubber bushings that provide quiet, vibration-free operation without the harshness of heim joints.

• Corrects axle alignment on Jeep Wrangler JK models with 0-6 inches of lift
• 1.5" x 0.375" wall DOM steel tubing construction for superior strength
• 1-1/4" fine adjustment threads for precise axle centering
• Premium rubber bushings reduce NVH (noise, vibration, and harshness)
• Zinc-plated and powder-coated finish for long-term corrosion protection
• Simple bolt-on installation to factory mounting points
• Manufacturer Part Number: JKSOGS121

Fitment Note: Designed for Left-Hand Drive (LHD) models only. Does NOT fit Right-Hand Drive (RHD) vehicles.

Fits select 2007-2018 Jeep Wrangler JK (Rubicon, Sahara, Sport, X, and 70th/75th Anniversary models).

Correct your axle alignment and optimize suspension travel with the JKS Manufacturing Front Heavy Duty Adjustable Track Bar. Modern JK suspension setups often provide enough droop travel to exceed the limits of standard axle bushings. JKS solves this by utilizing a high-misalignment spherical COM bearing at the axle end and a reliable OE-style rubber bushing at the frame, allowing you to run longer shocks without binding or premature wear.

Constructed from high-strength DOM tubing with OE-style bends, this track bar provides superior clearance and durability over the factory panhard rod. The fine-thread adjustment allows for ultra-precise axle centering after a lift, while the included misalignment spacers maximize angular travel at the axle.

• Manufacturer Part Number: JKSOGS120
• High-strength DOM tube construction with precision OE bends for clearance
• Replaceable COM bearing with self-lubricating, injection-molded race
• 42,000 lbs static load rating on spherical bearing for extreme durability
• Variable length design allows for precise axle centering and reduced component stress
• Includes high-angle misalignment spacers to ensure maximum articulation
• Direct replacement for original fixed-length front track bar

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Give your leaf-sprung Jeep Wrangler YJ the benefits of track bar stability without sacrificing the articulation needed for the trail. The JKS Manufacturing front telescoping track bar (MPN: JKS9800) is engineered to provide up to 31 percent more suspension travel than a solid track bar, significantly improving off-road performance while retaining critical on-road handling and highway stability.

This design eliminates the need for track bar relocation brackets, which are often the primary cause of induced bump steer in lifted applications. For durability in harsh environments, the assembly features a zinc-plated and powder-coated finish to resist corrosion and debris. Maintenance is simplified with a greaseable slip-shaft design, while high-quality Teflon-lined heim joints prevent binding and reduce stress on your vehicle's factory mounting points.

• Provides 31% more suspension travel than a solid track bar
• Greaseable slip-shaft ensures smooth, silent telescoping operation
• Teflon-lined heim joints eliminate binding and component stress
• Dual-stage finish: Zinc plated and powder coated for maximum protection
• Direct replacement for the factory track bar; prevents bump steer without relocation brackets
• Manufacturer Part Number: JKS9800

Fits select 2007-2023 Jeep Wrangler (JK, JL, JK Unlimited) and Jeep Gladiator models.

Restore steering precision and lateral stability to your Jeep with the JKS Manufacturing Track Bar Rebuild Kit. Over time, track bar bushings can degrade, leading to annoying steering wheel feedback, vague handling, and accelerated tire wear. This service pack is designed to refresh your existing JKS adjustable track bar with high-durometer solid mount bushings, maintaining tight tolerances and proper axle alignment under heavy suspension articulation.

• Manufacturer Part Number: JKS7202
• Service Compatibility: Designed specifically for JKS track bars OGS121, OGS122, OGS123, and OGS159
• Kit Contents: Includes two (2) solid mount bushings
• Capacity: One kit services one complete track bar
• Installation: Direct replacement for worn bushings in JKS adjustable track bars

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited.

Restore the performance of your JKS Quicker Disconnect sway bar links with the JKS7103 Rebuild Kit. Over time, polyurethane spacers and spherical bushings can wear down, leading to noticeable clunking noises and decreased handling precision. This comprehensive service kit provides the necessary components to overhaul one complete set (one pair) of sway bar links, ensuring your suspension remains quiet and responsive both on and off the road.

This kit is specifically designed for use with JKS Quicker Disconnect systems 2030, 2031, 2034, and 2035. Installation involves basic hand tools to replace the high-wear items, making it a straightforward maintenance task to eliminate link slop and restore factory-level tolerances.

• Complete rebuild kit for one set of sway bar links
• Eliminates clunking and restores link stability
• Includes high-quality spherical bushings
• Includes durable polyurethane spacers
• Includes replacement click pins
• Manufacturer Part Number: JKS7103
• Compatible with JKS Quicker Disconnect models: 2030, 2031, 2034, 2035

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Rubicon, Sahara, Sport, Sport S, X, and Special Editions).

Improve suspension geometry and rear axle positioning on your lifted Jeep with JKS J-Flex adjustable rear lower control arms. These arms are CNC-bent from heavy-wall DOM tubing to ensure maximum clearance for tires, frames, and axle mounts during extreme articulation. The adjustable design allows you to precisely fine-tune arm length to correct pinion angles and restore wheelbase after installing a lift kit.

The J-Flex system uses a combination of materials to balance off-road performance with on-road comfort. The adjustable end features a forged, greaseable flex joint with 1-1/4"-12 threads for superior strength and rebuildability. On the non-adjustable end, factory-style rubber bushings are utilized to absorb road vibrations and provide quiet, maintenance-free operation. Finished in a durable black powder coat, these arms are built to withstand harsh trail conditions.

• CNC-formed DOM tubing for axle and tire clearance
• Fully adjustable forged flex ends with 1-1/4"-12 threads for fine-tuning geometry
• Rebuildable and greaseable flex joints for long-term service
• OE-style rubber bushings provide quiet operation and absorb NVH
• Hex-shaped weld-in bungs for secure jam nut tightening
• Sold as a pair (left and right)
• Manufacturer Part Number: JKS1660

Fits select 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) models. These J-Flex adjustable front lower control arms allow for precise alignment correction and improved suspension geometry on lifted applications while maintaining on-road comfort.

Constructed from heavy-duty 2-inch OD x .250-wall DOM tubing, these arms are CNC bent to provide maximum tire clearance during tight turns and full articulation. The axle-side mounts feature premium durometer-specific rubber bushings to effectively isolate noise, vibration, and harshness (NVH) for a factory-quiet ride. On the frame side, JKS utilizes a forged flex end with 1-1/4”-12 threads and a greaseable design, offering 30 degrees of total misalignment to maximize wheel travel off-road. These arms come fully assembled and finished in a durable gloss black powder coat.

• Adjustable length to correct alignment caster and axle positioning
• Built from 2-inch OD x .250-wall DOM steel tubing for superior strength
• Forged flex joints allow for 30 degrees of misalignment (15 in either direction)
• OE-style rubber bushings at the axle end for maintenance-free operation and NVH isolation
• Greaseable and rebuildable flex ends for long-term serviceability
• CNC formed for maximum tire and chassis clearance
• Includes 1-1/4”-12 thread jam nuts and hex-shaped threaded bungs for easy adjustment
• Sold as a pair (MPN: JKS1625)

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (all submodels including Rubicon, Sahara, and Sport).

Improve your Jeep’s suspension geometry and off-road capability with JKS Manufacturing J-Flex adjustable front lower control arms. Specifically designed to correct caster and front axle positioning after a lift, these arms are CNC-formed from heavy-wall DOM tubing for maximum tire and frame clearance. The JKS1610 kit features a forged, fully rebuildable, and greaseable flex end to provide superior articulation without binding.

At the non-adjustable end, factory-style rubber bushings are utilized to isolate road noise and vibration for maintenance-free, quiet operation. The heavy-duty 1-1/4"-12 threaded ends and hex-shaped weld-in bungs ensure secure adjustment and easy tightening of the jam nuts. Each pair is finished in a durable black powder coat to resist corrosion on the trail.

• CNC-bent DOM tubing for optimal axle and frame clearance
• Forged adjustable flex end is fully rebuildable and greaseable
• High-strength 1-1/4"-12 threads for fine-tuned suspension alignment
• Factory-style rubber bushings for quiet operation and long-term durability
• Heavy-duty black powder-coated finish
• Sold as a pair
• Manufacturer Part Number: JKS1610

The JKS Manufacturing Fox 2.0 Adventure Series Universal Shock delivers high-performance damping for custom suspension configurations. Utilizing Fox's Internal Floating Piston (IFP) technology, this shock separates the shock oil from the high-pressure, nitrogen-charged gas chamber. This design eliminates oil aeration, allowing for fade-free performance across varying terrain and temperatures. Built with a 2-inch diameter smooth bore steel body, it provides the structural integrity needed for demanding off-road use.

• Internal Floating Piston (IFP) mono-tube design prevents oil aeration and cavitation
• 2-inch smooth bore steel body with zinc plating and clear coat for corrosion resistance
• Chrome-plated, heat-treated alloy steel shaft for long-term seal durability
• Extended Length: 30.06 inches
• Collapsed Length: 18.46 inches
• Stroke: 11.60 inches
• Mounting Style: EB1 Eyelet Bushing (Top) and EB1 Eyelet Bushing (Bottom)
• Manufacturer Part Number: FOX98450327

Fits 2018-2025 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT models (including 4xe and Rubicon 392) with 0 to 2 inches of suspension lift.

Maximize your Jeep's off-road potential by increasing front axle articulation by up to 30%. JKS Manufacturing Quicker Disconnects allow you to decouple the front sway bar in seconds via quick-release pins, providing the suspension travel needed for technical trails without sacrificing on-road stability. These adjustable links feature a variable-length design to adapt to your specific lift height and future suspension modifications.

• Easy Alignment: Stainless steel tapered mounting posts and self-aligning bushings allow for easy reconnection even on unlevel surfaces.
• Advanced Articulation: Spherical bushings provide unrestricted 360-degree rotation and 11 degrees of misalignment capability.
• Silent Operation: Integrated grease fittings allow for regular lubrication, ensuring smooth, quiet bushing performance.
• Secure Storage: Includes a pair of frame-mounted retention brackets to safely tuck the links and sway bar out of the way when disconnected.
• Rugged Construction: Finished in a durable black powder coat for long-term corrosion resistance; Made in the USA.
• Specifications: Fits 0-2.0" lift heights; Sold as a pair; Manufacturer Part Number: JKS2032.

Fits 2007-2018 Jeep Wrangler JK (Right Hand Drive models only) with suspension lifts ranging from 0 to 6 inches.

Restore proper suspension geometry and lateral axle alignment on your lifted RHD Jeep Wrangler JK with the JKS Manufacturing adjustable rear track bar. When suspension height is increased, the factory-length panhard rod pulls the axle housing out of alignment with the chassis. This heavy-duty replacement allows for ultra-precise centering of the rear axle, preventing undue stress on suspension components and improving overall handling predictability.

Built for the trail, this track bar is constructed from thick-wall, CNC-bent DOM tubing for maximum rigidity. It features a variable length design with 1-1/4 inch fine adjustment threads, allowing for minute changes to suit your specific ride height. Premium-grade rubber bushings are used at both ends to ensure quiet, vibration-free operation while maintaining the durability required for off-road use.

• Replaces original fixed-length panhard rod to center axle housing
• Heavy-duty DOM tube construction with OE-style bends for proper clearance
• Zinc-plated and powder-coated finish for superior corrosion resistance
• Precision 1-1/4 inch fine threads for exact axle positioning
• Premium rubber bushings provide long-lasting comfort and quietness
• Manufacturer Part Number: JKSOGS159
• Includes all necessary hardware for a direct bolt-on installation

Fits 1993-1998 Jeep Grand Cherokee ZJ (Base, Laredo, Limited, Orvis, SE, TSi, 5.9 Limited). Does not fit models equipped with the Dana 44 rear axle or Right Hand Drive (RHD) vehicles.

Properly align your rear axle and restore lateral control with the JKS Manufacturing adjustable track bar. Designed for Grand Cherokee ZJ models with 1 to 6 inches of suspension lift, this heavy-duty bar allows for ultra-precise axle positioning to compensate for geometry changes caused by increased ride height. By centering the axle housing under the chassis, you eliminate undue stress on related suspension components and ensure consistent handling.

• Manufactured from high-strength, CNC-bent DOM tubing for maximum durability and OE-style clearance
• Equipped with high-performance Dura-Thane polyurethane bushings at both ends for improved steering response and reduced deflection
• Fine adjustment threads allow for precise centering of the axle housing
• Dual-stage finish includes zinc plating and a durable powder coat for superior corrosion resistance
• Direct bolt-on installation replaces the factory fixed-length panhard rod
• Manufacturer Part Number: JKSOGS155

Fits select 1997-2006 Jeep Wrangler TJ and LJ models, including Rubicon, Sahara, Sport, SE, X, and Unlimited. This JKS Manufacturing heavy-duty rear adjustable track bar is designed to properly center the rear axle housing under the chassis after installing a suspension lift.

Constructed from 1.25-inch diameter DOM tubing with a thick 0.25-inch wall, this track bar replaces the factory fixed-length panhard rod to eliminate axle shift and prevent undue stress on suspension components. It features a variable-length design with 1.25-inch fine threads for ultra-precise positioning. For maximum articulation, it utilizes a spherical urethane bushing at one end to allow unrestricted travel, while a high-performance urethane bushing at the frame end maintains sharp steering responsiveness. The CNC-bent geometry ensures OE-style clearance for all underbody components.

• Fits Jeep Wrangler TJ/LJ with 0 to 6 inches of suspension lift
• Manufactured from heavy-duty 1.25" x 0.25" wall DOM tubing
• Zinc-plated and powder-coated finish for superior corrosion resistance
• Spherical urethane bushing allows for maximum suspension bind-free travel
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: JKSOGS151

Fits select 1984-2006 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, and Wrangler TJ models. This JKS Manufacturing front adjustable track bar is an essential upgrade for lifted Jeeps, allowing you to properly re-center the axle housing under the chassis to maintain correct steering geometry and prevent binding.

Built for the rigors of off-road use, this track bar replaces the light-duty factory panhard rod with heavy-duty 1.25-inch diameter DOM tubing featuring a 0.250-inch wall thickness. The CNC-bent design ensures maximum clearance for suspension travel while the 1-1/4 inch fine adjustment threads allow for ultra-precise positioning of the axle. To ensure a quiet ride and responsive steering, it utilizes a combination of spherical urethane and high-performance urethane bushings to isolate vibration without sacrificing control.

• Precise Alignment: Variable length design allows for fine-tuning to suit specific lift heights and suspension components.
• Rugged Construction: Heavy-duty 1.25" x .250"-wall DOM tubing provides superior strength over OE components.
• Premium Finish: Dual-stage protection with zinc plating and a durable powder coat finish for maximum corrosion resistance.
• Lift Requirements: Designed for Wrangler TJ with 2.5"+ lift, and Cherokee XJ/MJ or Grand Cherokee ZJ with 3.0"+ lift.
• Installation: Direct bolt-on replacement for the original fixed-length track bar; MPN: JKSOGS128.

Fits 1999-2004 Jeep Grand Cherokee WJ (Laredo, Limited, Overland, Special Edition, Sport).

Recenter the front axle of your Jeep Grand Cherokee WJ after installing a suspension lift. The JKS Manufacturing adjustable front track bar (JKSOGS127) is designed to control lateral movement of the axle housing and properly align the chassis with the axle. Replacing the original fixed-length panhard rod, this variable-length design allows for ultra-precise axle positioning to prevent undue stress on steering and suspension components.

Built for the rigors of off-road use, this track bar is constructed from 1.5-inch OD thick-wall DOM tubing. It is CNC bent to ensure correct geometry and maintain critical clearances under the front of the vehicle. High-performance Dura-Thane polyurethane bushings are utilized to improve steering responsiveness and durability over factory rubber. Fine adjustment threads and a 1.5-inch jam nut provide a positive lock once the axle is centered.

• Replaces OE fixed-length panhard rod to correct axle alignment on lifted vehicles
• 1.5-inch OD heavy-duty DOM steel tubing with CNC-accurate bends
• Dura-Thane polyurethane bushings for increased steering feel and longevity
• Durable gloss black powder coat and zinc-plated end for superior corrosion resistance
• 1.5-inch jam nut with fine adjustment threads for precise locking
• Part Number: JKSOGS127

Fits select 2018-2025 Jeep Wrangler JL/JLU and 2020-2023 Jeep Gladiator JT models.

Recenter the front axle of your lifted Jeep to correct geometry and control lateral movement with the JKS Manufacturing adjustable front track bar. This heavy-duty bar is designed to eliminate the axle shift common with suspension lifts while providing significantly higher strength than the factory fixed-length unit. Built from 1.5" OD thick-wall DOM tubing, it is CNC-formed to ensure proper clearance under the chassis and maintains factory mounting points for a straightforward installation.

The variable length design uses fine threads and a 1.5" jam nut for precise centering of the axle housing. To maintain ride quality and isolate noise, vibration, and harshness (NVH), JKS utilizes premium durometer-specific rubber bushings pre-installed at both ends. This track bar is finished in a durable gloss black powder coat with a zinc-plated end for maximum corrosion resistance in harsh off-road environments.

• Fits vehicles with 0 to 4.5 inches of lift height
• Constructed from high-strength 1.5" OD thick-wall DOM tubing
• Fine-thread adjustment with 1.5" jam nut for positive locking
• Includes durometer-specific rubber bushings to isolate NVH
• Compatible with OE-style mounting points
• Durable gloss black powder coat and zinc-plated finish
• Manufacturer Part Number: JKSOGS123

Fits 2007-2018 Jeep Wrangler and Wrangler JK Right Hand Drive (RHD) models.

When lifting a Jeep Wrangler JK, the factory track bar geometry pulls the axle housing away from the center of the chassis. The JKS Manufacturing adjustable front track bar corrects this alignment, centering the axle and restoring steering geometry on vehicles with up to 6 inches of lift. This heavy-duty component replaces the thin factory bar with high-strength 1.5-inch diameter DOM tubing featuring a 3/8-inch wall thickness for maximum rigidity under off-road stress.

Built for durability and precision, the bar utilizes CNC-bent tubing to maintain OE clearance and geometry. The 1-1/4 inch fine adjustment threads allow for ultra-precise axle positioning to suit any suspension combination. Both ends are equipped with factory-style rubber bushings to ensure quiet, vibration-free operation while maintaining a firm steering feel without the harshness of poly bushings.

• Fits stock height to 6-inch suspension lifts
• Constructed from 1.5" x .375" wall DOM tubing
• CNC-bent for exact fit and component clearance
• 1-1/4" fine adjustment threads for precise axle positioning
• Durable zinc and powder coat finish for superior corrosion resistance
• Heavy-duty rubber bushings minimize NVH (noise, vibration, harshness)
• Direct bolt-on installation using factory mounting points
• MPN: JKSOGS122

Fits 2021-2025 Ford Bronco (All trims including Badlands, Wildtrak, and Raptor).

While the current Ford Bronco is highly capable off-road, the factory steering tie rod ends are a documented weak point when navigating technical trails with oversized tires. Failure typically occurs at the threaded rod section under high stress. The JKS Manufacturing Tie Rod End Sleeve Kit (MPN: JKS9700) provides a heavy-duty solution by reinforcing the weakest section of the steering linkage. By replacing the thin OE jam nut with a robust 1-inch O.D. sleeve, this kit significantly increases the steering link diameter to prevent the rod from bending or snapping during off-road articulation.

Machined from cold rolled 1215 steel, these sleeves are engineered to handle the rigors of the trail while maintaining factory-level functionality. The design allows for full OE toe adjustment, ensuring you can dial in a precise front-end alignment regardless of your lift height. Installation is straightforward, offering immediate peace of mind for Bronco owners looking to push their vehicle's limits.

• Reinforces factory tie rod ends to prevent bending or breakage in high-stress situations
• Replaces the factory jam nut with a heavy-duty 1-inch O.D. sleeve
• Precision machined from high-strength cold rolled 1215 steel
• Works with all lift heights and maintains full range of OE toe adjustment
• Specifically designed for the factory inner tie rod end for a perfect fit
• Manufacturer Part Number: JKS9700

Fits select 1984-2006 Jeep Cherokee (XJ) and Wrangler (TJ/LJ) models.

Upgrade your rear upper suspension with the JKS Manufacturing Bar Pin Eliminator kit. This heavy-duty solution replaces the failure-prone factory bar pins with a robust mounting block and cross-pin system, converting the rear mount to a standard EB1 eyelet style. This design eliminates the excessive bushing movement that causes unwanted noise and vibration, while gaining nearly 1/2-inch of additional shock absorber down travel.

• Enhanced Longevity: The design preloads the shock absorber bushing to its proper specification, reducing friction and extending the life of the bushing.
• Heavy-Duty Construction: Manufactured from premium-grade steel with a zinc-plated finish for long-lasting corrosion resistance in harsh off-road environments.
• Machined Precision: Features smooth machined bushing surfaces to reduce wear and retains the original mounting alignment to prevent unnecessary stress on the shock absorber.
• Universal Compatibility: Works with both OE and aftermarket shock absorbers.
• MPN: JKS9604

Fits select 1984-2006 Jeep Cherokee (XJ), Comanche (MJ), Grand Cherokee (ZJ/WJ), and Wrangler (TJ/LJ).

Eliminate a notorious weak link in your Jeep's suspension with the JKS Manufacturing Front Lower Shock Bar Pin Eliminator. The factory bar pin design lacks lateral support for shock absorber bushings, often leading to bushing distortion, excessive movement, and annoying thumping or rattling sounds inside the cabin. This heavy-duty kit replaces the standard bar pin with a robust cross pin and mount block system, converting the shock mounting to a standard EB1 eyelet.

By preloading the shock absorber bushings to proper specifications, this eliminator kit reduces friction and wear while preventing the transfer of noise and vibration. The design maintains original mounting alignment to ensure no unnecessary stress is placed on the shock or bushing, even during articulation. Additionally, the low-profile design provides nearly 1/2-inch of additional down travel at the shock absorber.

• Manufactured from premium-grade steel for maximum durability
• Zinc-coated finish for superior corrosion resistance
• Machined bushing surfaces reduce friction and extend component life
• Compatible with both OE and aftermarket shock absorbers
• Converts mounting to standard EB1 eyelet configuration
• Manufacturer Part Number: JKS9603

Fits 2021-2025 Ford Bronco models (including Badlands, Big Bend, Black Diamond, Heritage, Outer Banks, Wildtrak, and Raptor).

Optimize your wheel-well clearance and eliminate tire rub with the JKS Manufacturing Max Tire Clearance Kit. Designed specifically for the 2021-2025 Ford Bronco, this kit replaces the factory body mount brackets with high-strength, low-profile alternatives. This modification allows for the installation of larger tires on both stock height and lifted vehicles while maintaining compatibility with factory and aftermarket "stubby" or mid-width bumpers.

• Heavy-duty 3/16" steel construction for maximum durability and support.
• Provides full clearance through wheel travel for 37x12.50 tires on Broncos with 2-4" of lift.
• Optimized for 17x9 to 20x9 wheels with 4.5"-5.5" backspacing.
• Allows for larger tire fitment at all ride heights; maximum tire size is dependent on specific lift height.
• High-clearance design provides a clean look when paired with aftermarket bumpers.
• MPN: JKS8300

Whether you are running a stock suspension or a lifted setup, this kit provides the necessary room for aggressive off-road rubber while retaining the structural integrity of the body mount system.

Fits select 1984-2022 Jeep Cherokee, Grand Cherokee, and Wrangler models equipped with JKS J-Flex arms.

Maintain the articulation and handling precision of your suspension with the JKS Manufacturing J-Flex Front Lower Control Arm Rebuild Kit. Over time, heavy trail use and high-mileage driving can wear down suspension bushings, leading to increased NVH (noise, vibration, harshness) and imprecise steering. This kit allows you to service a single J-Flex control arm, restoring its performance without the cost of replacing the entire arm assembly.

The JKS7001 kit features high-quality replacement bushings engineered to withstand the rotational forces and vertical travel common in off-road applications. It includes both the solid mount and flex joint components required for a complete refresh of the front lower arm's pivoting points.

• MPN: JKS7001
• Application: Fits JKS J-Flex control arm part numbers JKS1650, JKS1653, JKS1660, and JKS1661
• Service Count: Rebuilds one (1) front lower control arm
• Package Includes: 1 solid mount bushing, 2 flex joint bushings, 1 washer, and 1 snap ring

Fits select 2018-2025 Jeep Wrangler JL/JLU and 2020-2023 Jeep Gladiator JT models with 2-inch to 4.5-inch suspension lifts.

Restore factory-like suspension geometry and improve on-road handling with JKS Manufacturing Front Control Arm Correction Brackets. These heavy-duty brackets lower the frame-side control arm mounting points to level the arms, which corrects caster and restores the proper geometry lost during the lifting process. By improving the operating angle of the control arms, these brackets significantly reduce front-end "brake dive" and optimize front driveshaft CV joint angles for smoother operation.

Built for off-road durability, the brackets are manufactured from heavy-duty 7GA steel with a fully boxed and gusseted one-piece design. They feature two mounting hole positions to accurately dial in geometry for specific lift heights within the 2-inch to 4.5-inch range. The brackets install directly into the factory upper and lower control arm mounts using the original factory hardware.

• Corrects caster and suspension geometry for 2" to 4.5" of lift
• Reduces anti-dive during braking for more stable handling
• Improves front driveshaft CV joint operating angles
• Manufactured from heavy-duty 7GA steel with a fully boxed, gusseted design
• One-piece construction for superior strength and easy installation
• Installs into factory mounts using OE hardware
• Manufacturer Part Number: JKS6201

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models.

Restore factory-level handling and suspension geometry on your lifted Jeep Wrangler JK with JKS Manufacturing Front Control Arm Correction Brackets. These brackets are engineered for vehicles with 2 to 4.5 inches of lift to flatten the control arm operating angles. By lowering the frame-side mounting points, these brackets correct caster and significantly improve anti-dive characteristics during hard braking, providing a more stable and controlled driving experience on and off the road.

• Designed for 2007-2018 Jeep Wrangler JK with 2-inch to 4.5-inch lift kits
• Constructed from heavy-duty, 1-piece fully boxed 7GA steel for superior strength
• Features a fully gusseted design for maximum durability under off-road stress
• Dual mounting hole positions allow for precise geometry correction based on lift height
• Improves front driveshaft CV joint operating angles to extend component life
• Easy installation inside factory control arm mounts using OE hardware
• Compatible with factory arms or JKS adjustable control arms
• Manufacturer Part Number: JKS6200

Fits 1999-2004 Jeep Grand Cherokee WJ (Laredo, Limited, Overland, Special Edition, and Sport) equipped with 4" to 6" of suspension lift.

Improve your off-road performance with JKS Quicker Disconnects, designed to provide up to 30% more axle articulation by allowing you to easily decouple the front sway bar. This 100% bolt-on system replaces the factory end links and attaches to the sway bar and axle housing. The adjustable-length design ensures compatibility with various lift heights and future suspension modifications.

• Increased Articulation: Gain up to 30% more suspension travel for superior traction on technical terrain.
• Premium Components: Stainless steel tapered mounting posts and self-aligning bushings allow for easy connection and disconnection on uneven surfaces.
• Range of Motion: High-quality spherical bushings provide unrestricted 360° of rotation and 11° of misalignment capability.
• Serviceability: Integrated grease fittings allow for easy lubrication of the bushings to ensure smooth, silent operation.
• Durable Finish: Components are powder-coated for long-term corrosion resistance and durability.

These sway bar links are sold in pairs and are proudly made in the USA. Manufacturer Part Number: JKS3104.

Fits 1997-2006 Jeep Wrangler TJ and LJ models (including SE, Sport, Sahara, Rubicon, Unlimited, and X) equipped with 2.5" to 6" of suspension lift.

Restore proper suspension geometry and sharpen handling on your lifted Jeep with JKS Manufacturing rear adjustable sway bar end links. These heavy-duty links allow you to precisely set the sway bar operating angle, ensuring the bar remains level and functions correctly throughout the suspension cycle. By correcting the geometry, these links prevent the sway bar from contacting the axle housing during full suspension droop, a common issue on lifted TJs and LJs.

• Variable Length Design: Provides precise adjustment to accommodate lift heights from 2.5 to 6 inches, ensuring optimal sway bar orientation.
• High-Response Bushings: Reduced-deflection bushings minimize loss of motion between the chassis and suspension for improved cornering and stability.
• Zinc Plated Finish: Specialized zinc plating offers superior corrosion resistance and long-term durability against the elements.
• Direct Fitment: Designed to bolt into factory mounting points; specifically engineered for use with OEM sway bars.
• Package Includes: Sold as a complete pair for the rear axle.
• Manufacturer Part Number: JKS2942

Fits select 2018-2025 Jeep Wrangler (JL) and 2020-2023 Jeep Gladiator (JT) models. These JKS Front Adjustable Coil Spring Spacers (ACOS) provide a technical solution for fine-tuning your vehicle's front ride height without the labor-intensive process of swapping coil springs. Designed to compensate for the added weight of heavy bumpers, winches, or accessories, the ACOS system allows for precise height adjustments between 1.0 and 3.5 inches.

Each spacer features a locking threaded collar that enables ride height changes while the suspension remains on the vehicle. The kit includes integrated, adjustable bump stops to prevent bottoming out and protect your shocks during maximum wheel travel. For superior ride quality, JKS utilizes Dura-Thane isolators to prevent metal-on-metal contact and minimize NVH (noise, vibration, and harshness) transfer into the cabin.

• Lift Height: Adjustable from 1.0" to 3.5"
• Construction: High-tech billet material for maximum durability
• Isolators: Dura-Thane components for noise and vibration damping
• Features: Integrated adjustable bump stops for tire and travel clearance
• Quantity: Sold as a pair
• Part Number: JKS2211

Fits 1984-2006 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, and Wrangler TJ models with 0-4 inches of suspension lift.

Improve your Jeep's off-road capability with JKS Quicker Disconnects, designed to provide up to 30% more axle articulation by allowing you to easily decouple the front sway bar. These adjustable-length links feature a 100% bolt-on design that replaces factory equipment, offering a significant performance upgrade for both stock and modified vehicles.

• Gain 30% more axle articulation by disconnecting the front sway bar on uneven terrain
• Stainless steel tapered mounting posts and self-aligning bushings enable easy connection/disconnection on unlevel surfaces
• Spherical bushings allow for 360 degrees of rotation and up to 11 degrees of misalignment capability
• Integrated grease fittings ensure smooth, quiet operation and easy maintenance
• Variable-length design adapts to current lift height and future suspension modifications
• Durable powder-coated finish for long-term corrosion resistance
• Made in the USA and sold as a pair (includes both left and right links)
• Manufacturer Part Number: JKS2000