Fits 1960-1984 Toyota Land Cruiser Base.

The ARB Old Man Emu Dakar leaf spring (CS003R) is a core component of OME's integrated 4x4 suspension systems. Engineered to provide optimal ride performance across diverse operating conditions, these springs improve handling and load-carrying capabilities whether your vehicle is used for recreational off-roading or heavy commercial tasks. For the best results, these springs should be paired with OME 4x4 shock absorbers.

• Military Wrap Design: Provides an additional layer of safety by wrapping the second leaf around the spring eye.
• Advanced Durability: Every spring is shot peened to reduce surface stress and fully scragged to minimize the risk of future sagging.
• Improved Ride Quality: Features draw-tapered and diamond-cut leaves to ensure even load distribution and reduced friction at the leaf tips.
• Precision Mounting: The flat axle seat area provides a positive, secure mount that reduces overall spring stress.
• Interleaf Pads: Re-greasable nylon interleaf anti-friction pads reduce noise and wear at the leaf tips.
• Load Tested: Each unit is rigorously tested to ensure it meets the required mechanical specifications.
• Installation Features: Bolted leaf clamps allow for the installation of anti-squeak nylon liners.

Fits select 2007-2024 Toyota 4Runner, FJ Cruiser, and Tacoma.

Old Man Emu front coil springs are engineered to provide precise ride control and handle specific load requirements for off-road and utility use. These springs are manufactured from high-strength, micro-alloyed spring steel to resist sagging and corrosion over time. Each coil is formed on computer-controlled mandrels for consistency and undergoes a double-scragging process to reduce internal stress and maximize service life.

This coil set is designed as part of a fully integrated suspension system, specifically tuned for use with OME MT64 and Nitrocharger Plus shock absorbers. The durable matte black powder coat finish provides a hard-wearing barrier against debris and environmental exposure.

• Manufacturer Part Number: 4007
• Material: High-strength micro-alloyed spring steel
• Double scragged to minimize stress and prevent spring fatigue
• Precision mandrel-formed for exact fitment and consistent spring rates
• Finished in a durable, matte black powder coat
• Optimized for use with MT64 and Nitrocharger Plus shock absorbers
• Sold as a front pair

Fits 2023-2024 Toyota Land Cruiser 300.

The Old Man Emu Nitrocharger Plus front strut provides a significant suspension upgrade, balancing off-road durability with refined on-road handling. Specifically tuned for the Toyota Land Cruiser 300 platform, these struts utilize vehicle-specific damping to minimize body roll and improve steering precision across diverse terrain and load conditions. The heavy-gauge steel twin-tube body ensures internal components remain protected even if the outer shell is dented by trail debris.

Designed to be paired with OME vehicle-specific coil springs, this strut (MPN: 93054) features a unique 5-position spring seat adjustment system. This allows for precise ride height and preload tuning when accounting for heavy accessories like bumpers or winches. The high-flow piston design reduces oil aeration and manages heat for consistent performance during extended off-road use.

• 5-Position Spring Seat: Includes coil seat spacers to accommodate varying vehicle weights and setups.
• High-Flow Piston: Integrated design reduces aeration and oil temperature to extend shock life.
• Twin-Tube Construction: Heavy-gauge steel outer tube provides added protection in rough terrain.
• Vehicle-Specific Bushings: Durable polyurethane and rubber materials for extended service life and vibration isolation.
• Precision Tuning: Damping rates optimized specifically for the Land Cruiser 300 chassis.

Fits 1999-2007 Toyota Land Cruiser and Lexus LX470 (100 Series IFS models).

The Old Man Emu Nitrocharger Plus rear shock absorber is engineered to provide a significant upgrade in damping control and ride quality for the 100 Series platform. Designed as a direct replacement for factory dampers, these shocks feature vehicle-specific valving tuned to manage body roll and enhance steering response. The twin-tube design ensures the internal components remain protected from stone damage and trail debris, making them ideal for heavy-duty towing, off-road touring, and daily use.

• Integrated high-flow piston reduces oil aeration and operating temperatures to maintain consistent damping performance.
• Heavy-gauge steel tube construction provides increased structural strength for demanding terrain.
• Twin-tube body protects the internal cylinder from impacts and external damage.
• Vehicle-specific polyurethane and rubber bushings for improved longevity and vibration isolation.
• Optimized for use with OME coil springs to handle increased loads and varied driving conditions.
• Manufacturer Part Number: 63002

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models (Rubicon, Sahara, Sport, Unlimited, and X trims).

The ARB Old Man Emu (OME) Steering Stabilizer Mount Kit (FK50) is a vehicle-specific mounting solution designed to integrate seamlessly with the Old Man Emu suspension system. While shock absorbers and springs are the core of any suspension upgrade, this kit provides the essential hardware required to maintain proper steering geometry and securely mount a steering damper to your JK chassis.

Built to handle the stresses of off-road use, this kit ensures your steering stabilizer is positioned correctly to reduce vibration and provide precise steering feel. It replaces or supplements factory mounting points to accommodate high-performance dampers used in lifted applications.

• Designed specifically for the 2007-2018 Jeep Wrangler JK/JKU platform
• Enables secure mounting for Old Man Emu steering dampers
• Engineered for precise fitment and suspension system integration
• Direct-fit hardware simplifies installation on factory mounting points
• Manufacturer Part Number: FK50

Fits 1969-1985 Toyota 4Runner, Hi-Lux, and Pickup models.

The Old Man Emu Front U-Bolt Washer and Nut (OMEU52) is a critical component for the proper installation and maintenance of your front leaf spring suspension. Part of the integrated ARB Old Man Emu suspension system, this hardware set is engineered to provide reliable clamping force for front U-bolts. Replacing worn or single-use hardware during a suspension overhaul is essential for ensuring the axle remains securely located and the leaf pack stays properly compressed under load.

• Specifically engineered for front leaf spring installation
• Replaces worn or damaged OE-style hardware
• Designed for use with Old Man Emu suspension systems
• Manufacturer Part Number: OMEU52

Fits 1996-2000 Toyota RAV4 Base models. These Old Man Emu rear coil springs are engineered for drivers who require increased load-carrying capacity and improved ride control during remote travel or heavy use. Designed as part of a fully integrated suspension system, these springs provide a reliable solution for vehicles carrying additional gear, fuel, or water without sacrificing handling.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability.
• Double scragged before and after shot peening to reduce internal spring stress and prevent sagging over time.
• Formed on computer-controlled mandrels to ensure perfect consistency and exact fitment.
• Heavy-duty black powder coat finish provides superior resistance to corrosion and road debris.
• Specifically engineered to be paired with Old Man Emu shock absorbers for optimized ride quality.
• Designed and manufactured in Australia for demanding off-road environments.
• Manufacturer Part Number: 2794

Fits select 1990-2007 Toyota Land Cruiser and 1996-1997 Lexus LX450 models.

The ARB Old Man Emu adjustable rear panhard rod is an essential upgrade for raised 80 and 105 Series vehicles. When a vehicle is lifted, the factory panhard rod can pull the axle off-center, causing alignment issues and tracking problems. This adjustable rod allows you to reset the axle location and restore proper suspension geometry for improved handling and tire wear.

Constructed from high-strength 4140 alloy steel, this rod is designed to withstand the stresses of off-road use while maintaining strict tolerances. It features a hard-wearing black powder coat finish for maximum corrosion resistance and utilizes premium bushing technology to ensure a quiet, long-lasting service life. This model is compatible with both Right-Hand Drive (RHD) and Left-Hand Drive (LHD) configurations.

• Manufacturer Part Number: PANR008
• Forged from high-strength 4140 alloy steel
• Adjustable design to recenter axle on lifted vehicles
• Durable black powder coat finish for corrosion protection
• Premium bushing technology for extended life and performance
• Compatible with RHD and LHD models

Fits select 1969-2014 Toyota 4Runner, Pickup, and Hi-Lux models.

The ARB Old Man Emu (OME) Dakar Front Leaf Spring is a heavy-duty suspension upgrade engineered to provide consistent ride performance regardless of terrain or load. Designed as part of an integrated 4X4 suspension system, these springs replace fatigued factory components to improve handling and load-carrying capability. Each leaf pack is manufactured with precision, utilizing shot peening to reduce internal stress and a full scragging process to prevent future sagging. The design incorporates draw-tapered and diamond-cut leaves to ensure even load distribution and a smoother ride during articulation.

• Manufacturer Part Number: CS009FB
• Military Wrap: Provides a secondary safety attachment point by wrapping around the spring eye.
• Interleaf Anti-Friction Pads: Re-greasable nylon pads reduce friction at the leaf tips for quieter operation.
• Flat Axle Seat: Allows for a secure, positive axle mount that minimizes spring stress.
• Bolted Leaf Clamps: Features bolted clamps to maintain leaf alignment and accommodate anti-squeak liners.
• Shot Peened & Scragged: Specialized manufacturing treatments increase the fatigue life and durability of the spring steel.

Fits 1969-1985 Toyota Hi-Lux, Pickup, and 4Runner. This ARB Old Man Emu (OME) Dakar front leaf spring is a heavy-duty suspension upgrade engineered to provide superior ride quality and load-carrying capability regardless of the terrain. Designed as part of an integrated 4x4 suspension system, the CS008FA replaces worn factory springs with a multi-leaf pack built for durability and consistent performance.

• Military Wrap Design: Enhances safety by providing an additional point of contact around the spring eye.
• Shot Peened & Scragged: Each spring is shot peened to reduce internal stress and fully scragged to ensure the pack maintains its height without sagging.
• Reduced Friction: Features re-greasable nylon interleaf anti-friction pads at the tips and diamond-cut leaves to minimize friction and prevent squeaking.
• Secure Mounting: A flat axle seat area provides a positive, safe mounting surface, significantly reducing localized spring stress.
• Bolted Clamps: Utilizes bolted leaf clamps to allow for the installation of anti-squeak nylon liners, further refining ride comfort.
• Manufacturer Part Number: CS008FA

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks.

As part of ARB's integrated 4x4 suspension systems, Old Man Emu Emu Dakar leaf springs are engineered to provide optimum ride performance regardless of the terrain or load. Designed to replace worn factory springs, these leaf packs offer a significant upgrade in handling and load-carrying capacity for both recreational and commercial use. The construction features draw-tapered and diamond-cut leaves to ensure even load distribution and reduced stress at the leaf ends.

• Durable Construction: Shot-peened to reduce internal stress and fully scragged to prevent sagging over time.
• Safety and Strength: Military wrap design provides an additional layer of security by wrapping the second leaf around the spring eye.
• Reduced Friction: Re-greasable nylon interleaf anti-friction pads at the leaf tips minimize noise and wear.
• Optimized Ride: Two-stage leaf pack design provides comfort when the vehicle is unladen while maintaining support under heavy loads.
• Secure Mounting: A flat axle seat area ensures a positive, safe mount to the axle, reducing spring stress during articulation.
• Serviceable Design: Bolted leaf clamps allow for the installation of anti-squeak nylon liners for quieter operation.

Includes one rear leaf spring (Manufacturer Part Number: CS048R). For best performance, pair with Old Man Emu 4x4 shock absorbers.

Fits select 1969-1985 Toyota Hi-Lux, Pickup, and 4Runner models.

Old Man Emu Dakar leaf springs are engineered as part of ARB's integrated 4x4 suspension systems to provide superior ride performance and load-carrying capability. Unlike standard factory springs, these Dakar units utilize a specific multi-leaf design to handle the stresses of off-road terrain and varying payloads while maintaining a controlled, comfortable ride.

• Military Wrap: Provides an additional layer of safety by wrapping the second leaf around the main spring eye.
• Anti-Friction Pads: Re-greasable nylon interleaf pads reduce friction and noise at the leaf tips.
• Shot Peened & Scragged: Each spring is shot peened to reduce stress and fully scragged to prevent sagging over time.
• Precise Geometry: Features draw-tapered and diamond-cut leaves for better load distribution and a flat axle seat area for a secure, positive mount.
• Serviceable Design: Bolted leaf clamps allow for the installation of anti-squeak nylon liners to ensure quiet operation.

Manufacturer Part Number: CS008FB

Fits 1996-2002 Toyota 4Runner and 1998-2004 Toyota Tacoma models.

The ARB Old Man Emu (OME) Nitrocharger Plus front strut is engineered to bridge the gap between off-road durability and refined on-road manners. These dampers feature vehicle-specific valving designed to minimize body roll and sharpen steering response across diverse terrain and load configurations. Built with a rugged twin-tube design, the Nitrocharger Plus (MPN: 93004) utilizes a heavy-gauge steel outer tube to protect internal components from stone damage and debris during technical trail use.

A standout feature of this strut is the 5-position spring seat adjustment system. When paired with OME vehicle-specific coil springs, the included coil seat spacers allow owners to fine-tune ride height to compensate for added front-end weight from accessories like steel bumpers or winches.

• 5-Position Spring Seat: Includes coil seat spacers to accommodate varying vehicle weights and setups.
• High-Flow Piston: Reduces aeration and controls oil temperature to maintain consistent damping performance.
• Twin-Tube Body: Heavy-gauge steel construction provides structural strength and internal protection.
• Vehicle-Specific Bushings: Premium polyurethane and rubber materials for increased longevity and reduced NVH.
• Custom Tuning: Valving is specifically matched to the 1996-2004 Toyota 4x4 chassis for a controlled, responsive ride.

Fits 2002-2012 Jeep Liberty (KJ/KK).

Engineered for the demands of off-road travel and remote touring, ARB Old Man Emu front coil springs provide the support and ride control needed for fully loaded 4WD vehicles. These medium-load springs are designed to handle additional weight from accessories while significantly improving vehicle stability and suspension performance over factory components. When matched with OME shock absorbers, these coils create a fully integrated suspension system tailored to the specific weight and handling characteristics of the Jeep Liberty.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability and fatigue resistance
• Double scragged before and after shot peening to reduce internal spring stress and prevent sagging
• Formed on computer-precision mandrels to ensure consistent spring rates and perfect fitment
• Finished in a resilient black powder coat for long-term corrosion protection
• Constant and variable rate designs available to suit specific vehicle load requirements
• Designed and manufactured in Australia for rigorous off-road use
• Manufacturer Part Number: 2926

Fits 2016-2023 Toyota Tacoma (Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport).

Old Man Emu (OME) front coil springs are precision-engineered to support the additional weight of 4x4 accessories and gear during remote travel. While these springs provide an increase in ride height, their primary focus is delivering superior ride control and handling stability. Manufactured in Australia, each spring is designed to withstand the stress of a fully loaded vehicle while maintaining its height and performance over time.

• Manufactured from high-strength, micro-alloyed spring steel for maximum durability.
• Double scragged to reduce internal stress and significantly enhance spring life.
• Formed on computer-precision mandrels to ensure exact consistency and fitment.
• Finished in a heavy-duty black powder coat for long-lasting corrosion protection.
• Designed to be matched with Old Man Emu shock absorbers for a fully integrated suspension system.
• Manufacturer Part Number: 2888

Fits 1990-2007 Toyota Land Cruiser and 1996-2007 Lexus LX450/LX470 models.

Designed for raised vehicles, the ARB Old Man Emu adjustable upper trailing arms allow for precise axle location and geometry realignment. When a vehicle is lifted, the factory trailing arms often pull the axle out of its original alignment, negatively impacting pinion angles and suspension travel. These heavy-duty replacements allow you to reset the drivetrain geometry for better handling and reduced driveline vibration.

Constructed from high-strength 4140 alloy steel, these arms are built to withstand the rigors of off-road use. They feature a hard-wearing black powder coat finish for superior corrosion resistance and utilize premium bushing technology for improved articulation, quiet operation, and an extended service life.

• Realigns rear axle geometry on lifted vehicles to factory-spec tolerances
• Manufactured from high-strength 4140 alloy steel for maximum durability
• Corrosion-resistant black powder coat finish
• Premium bushing technology for reduced noise and improved longevity
• Adjustable design for fine-tuning pinion angles
• Manufacturer Part Number: UTA3036

Fits 2021-2025 Ford Bronco submodels including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, and Wildtrak.

When lifting an independent front suspension (IFS) vehicle, the factory suspension geometry is often pushed to its limit, making it difficult to achieve a proper alignment. ARB Old Man Emu (OME) Upper Control Arms (UCAs) are engineered to bring alignment cams back into acceptable ranges, specifically providing increased camber and caster correction for vehicles with a 2-inch (50mm) lift.

Constructed for durability and performance, these UCAs feature a tubular steel design with forged eyelets and forged ball joint housings. They utilize maintenance-free GIIRO bushings, which are free-pivoting and require no grease. The heavy-duty greaseable ball joints include a protective cap to keep contaminants out of the joint, ensuring a longer service life during off-road use.

• Manufacturer Part Number: UCA0011
• Includes one pair of front upper control arms
• Tubular steel construction with forged eyelets and ball joint housings
• Free-pivoting GIIRO bushings (grease and maintenance-free)
• Heavy-duty greaseable ball joints with protective caps
• Provides increased camber and caster for 2-inch (50mm) lifts
• Integrated mounting provisions for OE ABS lines
• Finished in a durable black powder coat

Fits 1998-2007 Toyota Land Cruiser Base.

Old Man Emu Upper Control Arms (UCAs) are engineered to correct suspension geometry and alignment on independent front suspension (IFS) vehicles. When lifting a Land Cruiser, the factory alignment cams often lack the range to compensate for the change in height. These UCAs bring the alignment back into spec, providing the increased camber and caster needed for a 2-inch (50mm) lift to ensure stable handling and optimal tire contact.

Built for durability in rugged off-road environments, these arms (MPN: UCA0010) feature a high-strength tubular design with forged eyelets and ball joint housings. They are equipped with GIIRO bushings, which are free-pivoting and maintenance-free, and heavy-duty greaseable ball joints protected by custom caps.

• Forged eyelet and ball joint housings for superior structural integrity
• Maintenance-free, free-pivoting GIIRO bushings
• Heavy-duty greaseable ball joints with protective weather caps
• Optimized caster and camber correction for 2-inch (50mm) lifts
• Integrated mounting points for OE ABS lines
• Durable black finish for corrosion resistance
• Manufacturer Part Number: UCA0010

Fits 2005-2023 Toyota Tacoma models including TRD Pro, TRD Off-Road, SR5, and Pre Runner.

Lifting an Independent Front Suspension (IFS) vehicle often pushes factory alignment settings beyond their adjustment limits. ARB Old Man Emu (OME) Front Upper Control Arms (UCAs) are engineered to bring alignment cams back into an acceptable range, specifically optimized for vehicles with a 50mm lift. These arms provide the necessary increase in caster and camber adjustment to maintain predictable handling and tire wear on modified Tacomas.

• Forged Strength: Constructed with forged ball joint housings and forged eyelets for maximum structural integrity.
• GIIRO Bushings: Equipped with GIIRO bushings that are free-pivoting, grease-free, and maintenance-free for quiet, bind-free operation.
• Serviceable Ball Joints: Includes heavy-duty greasable ball joints protected by OME-branded caps.
• Durable Finish: Coated in ARB’s Integrit powder-coat finish for superior corrosion resistance.
• OEM Integration: Features dedicated mounting provisions for factory ABS wires and is engineered for compatibility with OME GVM upgrades.
• Compliance: Tested and passed to meet VSB14 requirements.

Each set is boxed as a pair with foam inserts and includes comprehensive fitting instructions. Manufacturer Part Number: UCA0005.

Fits select 2005-2024 Toyota 4Runner and 2007-2014 Toyota FJ Cruiser.

When an Independent Front Suspension (IFS) vehicle is equipped with a suspension lift, the factory alignment geometry is often pushed beyond its adjustment limits. These ARB Old Man Emu (OME) Front Upper Control Arms provide the necessary caster and camber correction to bring your alignment back into spec, ensuring predictable handling and even tire wear. Engineered for vehicles with approximately a 50mm (2-inch) lift, these arms are essential for maintaining drivability after installing a suspension upgrade.

Built for durability and ease of maintenance, these UCAs feature forged ball joint housings and forged eyelets for maximum strength. They utilize GIIRO bushings, which are free-pivoting and maintenance-free, eliminating the need for periodic greasing while maintaining a quiet, bind-free ride. The heavy-duty greaseable ball joints are protected by OME-branded caps, and the entire assembly is finished in ARB’s Integrit powder coat for superior corrosion resistance.

• Manufacturer Part Number: UCA0004
• Corrects caster and camber for 50mm (2") lifts
• Forged ball joint housing and forged eyelets
• Heavy-duty greaseable ball joints with protective caps
• Maintenance-free, free-pivoting GIIRO bushings
• ARB Integrit black powder-coat finish
• Integrated mount provisions for factory ABS wires
• Tested and passed to meet VSB14 requirements
• Sold as a pair with fitting instructions included

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition models.

When an independent front suspension (IFS) vehicle is equipped with a suspension lift, the original caster and camber settings often exceed factory adjustment limits. ARB Old Man Emu (OME) Front Upper Control Arms are engineered to restore alignment geometry, bringing the alignment cams back into an acceptable range for proper handling and tire wear on lifted 200 Series Land Cruisers.

Built for durability in off-road environments, these arms feature forged ball joint housings and forged eyelets for maximum strength. They utilize GIIRO bushings, which are free-pivoting, grease-free, and maintenance-free for long-term reliability. To ensure a professional installation, the arms include integrated mounting provisions for the factory ABS wires and are finished in ARB's Integrit powder-coat for superior corrosion resistance.

• Specifically engineered for vehicles with a 50mm lift
• Heavy-duty greaseable ball joints with OME protective caps
• GIIRO free-pivoting, maintenance-free bushings
• Forged ball joint housing and forged eyelets for increased structural integrity
• ARB Integrit powder-coat finish for durability
• Direct-fit mount provisions for original equipment ABS wires
• Tested and compliant with VSB14 requirements
• Compatible with OME GVM Upgrades
• Includes installation instructions and boxed as a pair
• Manufacturer Part Number: UCA0001

Maintain your vehicle's leaf spring performance with the ARB Old Man Emu Short HDPE Interleaf Liner (SRBC60B). Designed as a critical service part for Old Man Emu suspension systems, this liner is precision-molded from High-Density Polyethylene (HDPE) to provide a durable, low-friction barrier between spring leaves.

By creating essential spacing between the leaves, this liner significantly reduces metal-on-metal friction and protects the spring pack from premature wear. This helps eliminate common leaf spring squeaks and ensures smoother suspension articulation during both on-road and off-road driving.

• Manufacturer Part Number: SRBC60B
• Material: High-Density Polyethylene (HDPE)
• Function: Reduces friction and noise by spacing spring leaves
• Type: Leaf spring service and maintenance component
• Size: Short configuration

The ARB Old Man Emu SRBC60A Interleaf Liner is a specialized service component designed for leaf spring maintenance and performance. Manufactured from durable High-Density Polyethylene (HDPE), these long-format liners are installed between individual leaves within a spring pack to improve operational efficiency.

By creating consistent spacing between the leaves, this liner significantly reduces metal-on-metal friction and minimizes the common squeaks associated with leaf spring articulation. As an integral part of the Old Man Emu suspension ecosystem, it ensures your leaf pack operates smoothly under load while protecting the springs from premature wear.

• Material: High-Density Polyethylene (HDPE) for low friction and high durability
• Type: Long Interleaf Liner
• Function: Reduces interleaf friction and operational noise
• Compatibility: Designed for use with Old Man Emu leaf spring packs
• Manufacturer Part Number: SRBC60A

Fits 2018-2025 Jeep Wrangler JL models (LHD only).

When lifting a Jeep Wrangler JL, the factory suspension geometry is altered, often pulling the rear axle out of alignment. This ARB Old Man Emu adjustable rear panhard rod is engineered to reset the axle location and restore correct tracking. It is a critical component for raised vehicles to ensure predictable handling and prevent uneven tire wear.

Built for durability on and off the trail, this rod is fabricated from high-strength 4140 alloy steel and finished with a hard-wearing black powder coat for superior corrosion resistance. It features premium OME bushing technology designed to improve performance and provide an extended service life compared to standard components.

• Manufacturer Part Number: PANRJL002
• Material: High-strength 4140 alloy steel
• Finish: Hard-wearing black powder coat
• Bushing Type: Premium OME bushing technology
• Compatibility: Designed for Left-Hand Drive (LHD) vehicles only
• Function: Corrects axle alignment and suspension geometry on lifted applications

Fits 2018-2025 Jeep Wrangler (JL) models in Left-Hand Drive configuration.

When you lift your Jeep Wrangler JL, the factory suspension geometry is altered, often pulling the front axle to one side. The ARB Old Man Emu adjustable front Panhard rod solves this by allowing you to precisely reset the axle location and realign the front-end geometry. This is a critical component for maintaining straight-line tracking and proper tire clearance on raised vehicles.

Built for the rigors of off-road use, this Panhard rod is fabricated from high-strength 4140 alloy steel. It features ARB's premium bushing technology, designed to provide a more compliant ride and extended service life compared to standard rubber or polyurethane alternatives. The entire assembly is finished in a hard-wearing black powder coat for maximum corrosion resistance against the elements.

• Maintains proper axle alignment on lifted 2018-2025 Jeep Wrangler JL models
• Constructed from high-strength 4140 alloy steel for maximum durability
• Hard-wearing black powder coat finish protects against rust and corrosion
• Equipped with premium bushing technology for improved performance and longevity
• Designed specifically for Left-Hand Drive (LHD) vehicles
• Manufacturer Part Number: PANRJL001

Fits select 2015-2023 Chevrolet Colorado and Ford Ranger models.

The ARB Old Man Emu (OME) U-bolt washer and nut kit is essential hardware for the proper installation of rear leaf springs. As a critical component of a fully integrated 4x4 suspension system, these nuts and washers are designed to maintain clamping force and secure the leaf pack to the axle assembly under high-load conditions.

• Designed specifically for rear leaf spring installation and maintenance
• Integrated hardware to support Old Man Emu suspension systems
• Durable construction to withstand the stresses of off-road articulation and heavy towing
• Provides a reliable replacement for worn or corroded factory hardware
• Manufacturer Part Number: OMEU81

Fits 2005-2015 Nissan Xterra (Off-Road, PRO-4X, S, SE, and X models).

Ensure your rear suspension is properly secured with the ARB Old Man Emu U-Bolt Washers and Nuts kit. This hardware set is specifically designed for the installation of rear leaf springs, providing the necessary clamping force and reliability required for both daily driving and demanding off-road use. As part of the fully integrated OME suspension range, these components are engineered to work seamlessly with OME U-bolts and leaf spring assemblies.

• Manufacturer Part Number: OMEU72
• Application: Installation of rear leaf springs
• System Context: Rear suspension hardware for leaf spring setups
• Included Hardware: Specific washers and nuts required for U-bolt fitment
• Brand Quality: Engineered as part of the Old Man Emu integrated suspension system

Fits select 1984-2001 Jeep Cherokee and Suzuki Samurai models. This ARB Old Man Emu suspension hardware is specifically engineered to integrate with OME leaf spring systems, ensuring a precise fit and reliable performance under off-road conditions.

The OMEU60 U-bolt washer and nut are essential components for the proper installation of front or rear leaf springs. Designed to meet the high standards of the Old Man Emu range, these fasteners provide the necessary clamping force and durability required for heavy-duty 4x4 applications.

• Replaces or completes hardware for leaf spring installation
• Engineered for high-strength suspension integration
• Compatible with ARB Old Man Emu U-bolts and spring kits
• Manufacturer Part Number: OMEU60

Fits 1960-1989 Toyota Land Cruiser models. This ARB Old Man Emu (OME) hardware kit is engineered for the precise installation of rear leaf springs, providing the necessary securing components for a complete suspension overhaul or maintenance.

As part of the integrated OME suspension system, these washers and nuts are manufactured to work specifically with OME U-bolts and spring kits. Using the correct hardware is critical for maintaining proper torque and ensuring the structural integrity of your vehicle's leaf spring assembly during off-road use.

• Manufacturer Part Number: OMEU59B
• Position: Rear
• Application: Rear U-bolt fastening and leaf spring installation
• Material: High-strength steel construction
• Compatibility: Designed for 1960-1989 Toyota Land Cruiser models

Fits select 1969-1985 Toyota Land Cruiser and 1989-1996 Isuzu Amigo and Rodeo.

The ARB Old Man Emu (OME) U-Bolt Washer and Nut (MPN: OMEU59A) is a critical hardware component designed for the secure installation of front or rear leaf springs. Part of the fully integrated OME suspension range, this fastener set ensures that U-bolts maintain their torque and structural integrity under the high-stress conditions of off-road driving and heavy-duty hauling.

• Specifically engineered for leaf spring installation on select 4x4 vehicles
• Designed to complement Old Man Emu U-bolts and suspension systems
• High-strength construction to withstand vibration and trail loads
• Manufacturer Part Number: OMEU59A