The Skunk2 K Series Coil Cover protects both the wire harness and the precious coil packs sitting atop of the valve cover. This coil cover fits 2002-2011 K Series valve covers and is made from mild steel with a laser-cut Skunk2 Racing logo and powder coated black. The aluminum secondary plate that sits below the main-plate offers additional customization by allowing you to paint or powder coat it in a contrasting color, giving it that extra POP!!

• Protects Coil Packs and Wire Harness
• Mounting Hardware Included
• Includes Contrast Insert
• Black Powder Coat

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '02-'06 RSX, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '02-'05 Civic Si, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicle's OEM water housings, radiator necks, and OEM hose clamps. You're going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• Handmade Automotive Grade Silicone
• Multi Layer Embedded Fiber Linings
• Max Temperature 446F (230C)
• Inner Diameter 1.25 in.
• Outer Diameter 1.65 in.

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '06-'11 Civic Si, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '00-'09 S2000, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Short-Throw Shift Adapter for the 06-08 Civic Si, help put the finishing touches onto your vehicle you work so hard to make perform well. Skunk2's Short-Throw Shift Adapters are manufactured from high-strength steel alloy for maximum strength and longevity. Skunk2's Short-Throw Shift Adapters are precision CNC machined for a precise fit and help promote smoother, more positive shifting, suitable for all forms of racing and street applications. Skunk2's Short-Throw Shift Adapter is a simple solution that reduces shift throws by more than 20 percent and installs quickly and easily with basic hand tools.

• Increases Shifting Precision And Enhances Your Interior
• Steel Alloy

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its billet Shift Knobs for five-speed Nissans, Mitsubishi and Mazda help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Skunk2 Shift Knob is machined from high-quality, billet stainless steel and features a PVD titanium coating that's designed to resist scratching and wear. Skunk2 Shift Knobs are also custom weighted to 440 grams each and designed for use with Skunk2 Short-Throw Shifters as well as with OEM applications. The additional weight helps promote smoother, more positive shifting, suitable for all forms of racing and street applications. Don't be fooled by less expensive imitations; only Skunk2 Shift Knobs feature a true titanium finish and are precision machined to exacting standards

• For Use w/Skunk2 Short Shifter For The Ultimate Combination
• Allows For Smoother More Positive Shifting
• PVT Titanium Coating

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its billet Shift Knobs for six-speed Hondas, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Skunk2 Shift Knob is machined from high-quality, billet stainless steel and features a PVD titanium coating that's designed to resist scratching and wear. Skunk2 Shift Knobs are also custom weighted to 440 grams each and designed for use with Skunk2 Short-Throw Shifters as well as with OEM applications. The additional weight helps promote smoother, more positive shifting, suitable for all forms of racing and street applications. Don't be fooled by less expensive imitations; only Skunk2 Shift Knobs feature a true titanium finish and are precision machined to exacting standards

• For Use w/Skunk2 Short Shifter For The Ultimate Combination
• Allows For Smoother More Positive Shifting
• PVT Titanium Coating

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its billet Shift Knobs for five-speed Hondas, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Skunk2 Shift Knob is machined from high-quality, billet stainless steel and features a PVD titanium coating that's designed to resist scratching and wear. Skunk2 Shift Knobs are also custom weighted to 440 grams each and designed for use with Skunk2 Short-Throw Shifters as well as with OEM applications. The additional weight helps promote smoother, more positive shifting, suitable for all forms of racing and street applications. Don't be fooled by less expensive imitations; only Skunk2 Shift Knobs feature a true titanium finish and are precision machined to exacting standards.

• For Use w/Skunk2 Short Shifter For The Ultimate Combination
• Allows For Smoother More Positive Shifting
• PVT Titanium Coating

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Hard Anodized Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Hard Anodized Billet Oil Cap is precision CNC machined and features a durable, gun metal finish. Skunk2's Hard Anodized Billet Oil Caps feature a 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.

• 33mm x 2.8mm Thread Pitch
• Acid-Etched Skunk2 Logo
• Hard Anodized Finish
• CNC Machined

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Black Series Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Black Series Billet Oil Cap is precision CNC machined and features Skunk2s signature, Black Series finish. Skunk2's Black Series Billet Oil Caps feature a 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.

• 33mm x 2.8mm Thread Pitch
• Acid-Etched Skunk2 Logo
• Black Anodized Finish
• CNC Machined

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Polished Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Polished Billet Oil Cap is precision CNC machined and features a durable, fully polished finish. Skunk2's Polished Billet Oil Caps feature an 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.

• 33mm x 2.8mm Thread Pitch
• Acid-Etched Skunk2 Logo
• Fully Polished Finish
• CNC Machined

This Part Fits:

Skunk2 is proud to introduce its all-new FA20 BRZ/FRS Oil Filter Sandwich Adapter. Each adapter is made from 6061 Aluminum, CNC machined and then hard-anodized. Skunk2s Oil Filter Sandwich Adapter features a 1/8 pipe port to feed a turbo or the addition of a pressure gauge. The Skunk2 FA20 BRZ/FRS Sandwich Adapter fits the Kraftwerks supercharger kit by raising the height and splitting the inlet and outlet ports.

• Fits w/Kraftwerks Supercharger
• For Use w/Oil Cooler Kit
• 6061 Aluminum

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Black Series Billet Battery Tiedowns, compatible with the 92-00 Civic and 94-01 Integra, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Black Series Billet Battery Tiedown is precision CNC machined from high-quality, 6061 billet aluminum and features Skunk2s signature, Black Series finish. Skunk2's Black Series Billet Battery Tiedowns are also compatible with your vehicle's original mounts as well as with OEM and aftermarket batteries and feature laser-etched Skunk2 logos for the ultimate finishing touch.

• Compatible w/OEM/Aftermarket Batteries
• Compatible w/OEM Mounts
• Black Anodized Finish

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Billet Battery Tiedowns, compatible with the 92-00 Civic and 94-01 Integra, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2's racing heritage and high-performance parts manufacturing practices, each Billet Battery Tiedown is precision CNC machined from high-quality, 6061 billet aluminum and features a durable, hard anodized finish. Skunk2's Billet Battery Tiedowns are also compatible with your vehicle's original mounts as well as with OEM and aftermarket batteries and feature laser-etched Skunk2 logos for the ultimate finishing touch.

• Compatible w/OEM/Aftermarket Batteries
• Compatible w/OEM Mounts
• Hard Anodized Finish

This Part Fits:

Skunk2 is proud to introduce its Spherical Bearing Upgrade for the Alpha and Ultra Series Lower Control Arms. Designed for the hardcore racer and discerning enthusiast, these high load steel Spherical Bearing maintain accurate suspension geometry under aggressive driving. The bushing change can be done in minutes with basic tools.

• Replaces Outer Bearing Or Upgrade Inner Bushing On Ultra LCAs
• Incl. [2]Spherical Bearings/[2]Snap Rings/[4]Spacers
• Completes Two Mounting Points

Skunk2 Racing is proud to announce the release of its Spherical Bearing Compliance Bracket for the front lower control arms on the '96-'00 Civic. Skunk2 Racing's Billet Compliance Bracket w/ Spherical Bearings are direct replacements for your soft and worn OEM units that compromise geometry for comfort. Our Billet Brackets and Spherical Bearings eliminate deflection and increases the lower control arms freedom of motion on multiple axes simultaneously. Spherical Bearing Billet Compliance Brackets offer the hardcore racer and discerning enthusiast, the very best of the best. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings that are retained in the billet housing with removable Spirolox, giving you the ability to service or replace when needed. Skunk2 Racing Billet Compliance Brackets w/ Spherical Bearings are recommended for no-nonsense track cars or extreme performance streetcars. For maximum suspension performance, Skunk2 Billet Compliance Brackets w/ Spherical Bearings are best complemented with Skunk2 Spherical Bearing Front Lower Control Arms, Pro Series Camber Kits, Coilovers, and Strut Tower Bars.

• Spherical Compliance Bearings
• Billet Aluminum Housing
• Misaligned Spacers
• Black Anodized
• Set of 2

This Part Fits:

Skunk2 Racing is proud to announce the release of its Spherical Bearing Front Lower Control Arms for the 92-95 Civic's and 94-01 Integra's. The race FLCA's are based on the same technology the company's been using in its own racecars for over 20 years. Skunk2 Racing's Spherical Bearing Front Lower Control Arms are direct replacements that greatly improve OEM suspension geometry by increasing freedom of motion on multiple axes simultaneously and eliminating suspension bind. Spherical Bearing Front Lower Control Arms offer the hardcore racer and discerning enthusiast, the very best of the best. Skunk2 uses brand new direct replacement cores rather than beat up used ones, saving you headaches associated with getting a used set that is potentially bent or damaged. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings that are retained in the lower control arm with precision machined bearing sleeves that have been press-fit and TIG welded for redundancy. Each spherical bearing is locked into the sleeves with removable Spirolox, giving you the ability to service or replace when needed. Skunk2 Racing Front Lower Control Arms are recommended for no-nonsense track cars or extreme performance streetcars. For maximum suspension performance, Skunk2 Front Lower Control Arms are best complemented with Skunk2 Pro Series Camber Kits, Coilovers, and Strut Tower Bars.

• Accurate Suspension Geometry Under Aggressive Driving
• Corrosion Resistant Yellow Zinc Platting
• High Load Steel Spherical Bearings
• TIG Welded Precision Bearing Cups
• Brand New Direct Replacement Arms
• Steel Misalignment Bushings
• Improved 60 ft. Times
• No Core Charge
• Set of 2

This Part Fits:

Skunk2 Racing is proud to announce the release of its Spherical Bearing Compliance Bracket for the front lower control arms on the '92-'95 Civic and '94-'01 Integra. Skunk2 Racing's Billet Compliance Bracket w/ Spherical Bearings are direct replacements for your soft and worn OEM units that compromise geometry for comfort. Our Billet Brackets and Spherical Bearings eliminate deflection and increases the lower control arms freedom of motion on multiple axes simultaneously. Spherical Bearing Billet Compliance Brackets offer the hardcore racer and discerning enthusiast, the very best of the best. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings that are retained in the billet housing with removable Spirolox, giving you the ability to service or replace when needed. Skunk2 Racing Billet Compliance Brackets w/ Spherical Bearings are recommended for no-nonsense track cars or extreme performance streetcars. For maximum suspension performance, Skunk2 Billet Compliance Brackets w/ Spherical Bearings are best complemented with Skunk2 Spherical Bearing Front Lower Control Arms, Pro Series Camber Kits, Coilovers, and Strut Tower Bars. False

• Provision For Sway-Bar Bracket
• Spherical Compliance Bearings
• Billet Aluminum Housing
• Misaligned Spacers
• Black Anodized
• Set of 2

This Part Fits:

Skunk2 Racing is proud to announce the release of its Spherical Bearing Compliance Bracket for the front lower control arms on the '92-'95 Civic and '94-'01 Integra. Skunk2 Racing's Billet Compliance Bracket w/ Spherical Bearings are direct replacements for your soft and worn OEM units that compromise geometry for comfort. Our Billet Brackets and Spherical Bearings eliminate deflection and increases the lower control arms freedom of motion on multiple axes simultaneously. Spherical Bearing Billet Compliance Brackets offer the hardcore racer and discerning enthusiast, the very best of the best. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings that are retained in the billet housing with removable Spirolox, giving you the ability to service or replace when needed. Skunk2 Racing Billet Compliance Brackets w/ Spherical Bearings are recommended for no-nonsense track cars or extreme performance streetcars. For maximum suspension performance, Skunk2 Billet Compliance Brackets w/ Spherical Bearings are best complemented with Skunk2 Spherical Bearing Front Lower Control Arms, Pro Series Camber Kits, Coilovers, and Strut Tower Bars. False

• Provision For Sway-Bar Bracket
• Spherical Compliance Bearings
• Billet Aluminum Housing
• Misaligned Spacers
• Hard Anodized
• Set of 2

This Part Fits:

Skunk2 Racing is proud to announce the release of its Hard Rubber Bushing Front Lower Control Arms for the '92-'95 Civic and '94-'01 Integra. Skunk2 Racing's Hard Rubber Bushing Front Lower Control Arms for the '92-'95 Civic and '94-'01 Integra are direct replacements for OEM that greatly improve your vehicles ride quality and comfort! Restoring lost suspension performance due to soft, worn, and deteriorated 20+ year old bushings is a snap with the Skunk2 Hard Rubber LCA's; no need to hassle with taking your car to a shop or have have bushings pressed in and out! Skunk2 Racing uses OEM replacement arms that install with common hand tools! Skunk2 Racing Front Lower Control Arms are recommended for street cars and track cars alike. For improved suspension performance, Skunk2 Front Lower Control Arms are best complemented with Skunk2 Pro Series Camber Kits, Coilovers, and Strut Tower Bars.

• Brand New Direct Replacement Arms [No Cores Needed]
• Corrosion Resistant Yellow Zinc Platting
• Restores Degraded Suspension Geometry
• Bushings 15% Harder Than OEM
• Improved 60 ft. Times
• Set of 2

This Part Fits:

Skunk2 Racing is proud to announce the release of its Hard Rubber Bushing Front Lower Control Arms for the '88-'91 Civic/ CRX. Skunk2 Racing's Hard Rubber Bushing Front Lower Control Arms for the '88-'91 Civic/ CRX are direct replacements for OEM that greatly improve your vehicles ride quality and comfort! Restoring lost suspension performance due to soft, worn, and deteriorated 20+ year old bushings is a snap with the Skunk2 Hard Rubber LCA's; no need to hassle with taking your car to a shop or have have bushings pressed in and out! Skunk2 Racing uses OEM replacement arms that install with common hand tools! Skunk2 Racing Front Lower Control Arms are recommended for street cars and track cars alike. For improved suspension performance, Skunk2 Front Lower Control Arms are best complemented with Skunk2 Pro Series Camber Kits, Coilovers, and Strut Tower Bars.

• Brand New Direct Replacement Arms [No Cores Needed]
• Corrosion Resistant Yellow Zinc Platting
• Restores Degraded Suspension Geometry
• Bushings 15% Harder Than OEM
• Improved 60 ft. Times
• Set of 2

This Part Fits:

Skunk2 Racing is proud to announce the release of its Spherical Bearing Front Lower Control Arms for the '88-'91 Civic/ CRX. Skunk2 Racing's Spherical Bearing Front Lower Control Arms for the '88-'91 Civic/ CRX are direct replacements for OEM that greatly improve your vehicles ride quality and comfort! Spherical Bearing Front Lower Control Arms offer the hardcore racer and discerning enthusiast, the very best of the best. Skunk2 uses brand new direct replacement cores rather than beat up used ones, saving you headaches associated with getting a used set that is potentially bent or damaged. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings that are retained in the lower control arm with precision machined bearing sleeves that have been press-fit and TIG welded for redundancy. Each spherical bearing is locked into the sleeves with removable Spirolox, giving you the ability to service or replace when needed. Skunk2 Racing Front Lower Control Arms are recommended for street cars and track cars alike. For improved suspension performance, Skunk2 Front Lower Control Arms are best complemented with Skunk2 Pro Series Camber Kits, Coilovers, and Strut Tower Bars.

• Accurate Suspension Geometry Under Aggressive Driving
• Corrosion Resistant Yellow Zinc Platting
• High Load Steel Spherical Bearings
• TIG Welded Precision Bearing Cups
• Brand New Direct Replacement Arms
• Steel Misalignment Bushings
• Improved 60 ft. Times
• No Core Charge
• Set of 2

This Part Fits:

Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Ultra Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of 'Me Too' Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA's. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools

• Delrin Shock Mount Bushings For Improved Shock Performance
• Optional Inboard Spherical Bearing Upgrade Available
• Outboard Spherical Bearing Eliminates Bushing Twist
• 27% Stronger Than Original Skunk2 Pro Series Arms
• 19% Lighter Than Original Skunk2 Pro Series Arms
• Tuned Polyurethane Inboard Bushing Dampens NVH
• CNC Machined From Forged 7075 Aluminum
• 45% Lighter Than OEM Arms

This Part Fits:

Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Ultra Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of 'Me Too' Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA's. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools

• Spherical Bearing Option To Maintain Accurate Suspension Geometry
• Delrin Shock Bushings For Low Friction w/Minimal Deflection
• Tuned Durometer Elastomeric Bushings To Damp Out Harshness
• 19% Lighter Than Original S2 LCA Design
• CNC Machined From Forged 7075 Aluminum
• 27% Stronger Than Previous Skunk LCAs
• 44% Lighter Than OEM Arms

This Part Fits:

Skunk2 Alpha Rear Lower Control Arms are direct replacements for the factory OEM arms, and are ideal for street and race applications. Benchmarking off of our previous LCA design, our goal was to design an arm that was lighter, stronger, and more durable without increased noise, vibration, or harshness (NVH). The inboard bushing features a large tuned durometer elastomeric bushing, that is hard enough for improved handling performance yet compliant enough to minimize unwanted increase in NVH, while the lower shock mount utilizes Delrin bushings for reduced friction and minimal deflection for improved dynamic shock control. For improved bushing life, the latest materials were used, and a high-precision spherical bearing on the trailing arm side was utilized to reduce twist at the inboard bushing. Even though a second spherical bearing for the inboard pick up point is offered as a racing upgrade, we chose to use only one spherical bearing to minimize unwanted increases in NVH for street use. By using this specific combination of bushings, handling performance and control is improved significantly without compromising NVH or comfort.

• Delrin Shock Mount Bushings For Improved Shock Performance
• Outboard Spherical Bearing To Reduce Bushing Twist
• Tuned Polyurethane Inboard Bushing To Dampen NVH
• 11% Stronger Than Original S2 LCA Design
• 19% Lighter Than Original S2 LCA Design
• CNC Machined From Forged 6061 Aluminum
• 40% Lighter Than OEM Arms

This Part Fits:

Skunk2 Alpha Rear Lower Control Arms are direct replacements for the factory OEM arms, and are ideal for street and race applications. Benchmarking off of our previous LCA design, our goal was to design an arm that was lighter, stronger, and more durable without increased noise, vibration, or harshness (NVH). The inboard bushing features a large tuned durometer elastomeric bushing, that is hard enough for improved handling performance yet compliant enough to minimize unwanted increase in NVH, while the lower shock mount utilizes Delrin bushings for reduced friction and minimal deflection for improved dynamic shock control. For improved bushing life, the latest materials were used, and a high-precision spherical bearing on the trailing arm side was utilized to reduce twist at the inboard bushing. Even though a second spherical bearing for the inboard pick up point is offered as a racing upgrade, we chose to use only one spherical bearing to minimize unwanted increases in NVH for street use. By using this specific combination of bushings, handling performance and control is improved significantly without compromising NVH or comfort.

• Delrin Shock Mount Bushings For Improved Shock Performance
• Outboard Spherical Bearing To Reduce Bushing Twist
• Tuned Polyurethane Inboard Bushing To Dampen NVH
• 11% Stronger Than Original S2 LCA Design
• 19% Lighter Than Original S2 LCA Design
• CNC Machined From Forged 6061 Aluminum
• 40% Lighter Than OEM Arms

This Part Fits:

Skunk2 Alpha Rear Lower Control Arms are direct replacements for the factory OEM arms, and are ideal for street and race applications. Benchmarking off of our previous LCA design, our goal was to design an arm that was lighter, stronger, and more durable without increased noise, vibration, or harshness (NVH). The inboard bushing features a large tuned durometer elastomeric bushing, that is hard enough for improved handling performance yet compliant enough to minimize unwanted increase in NVH, while the lower shock mount utilizes Delrin bushings for reduced friction and minimal deflection for improved dynamic shock control. For improved bushing life, the latest materials were used, and a high-precision spherical bearing on the trailing arm side was utilized to reduce twist at the inboard bushing. Even though a second spherical bearing for the inboard pick up point is offered as a racing upgrade, we chose to use only one spherical bearing to minimize unwanted increases in NVH for street use. By using this specific combination of bushings, handling performance and control is improved significantly without compromising NVH or comfort.

• Delrin Shock Mount Bushings For Improved Shock Performance
• Outboard Spherical Bearing To Reduce Bushing Twist
• Tuned Polyurethane Inboard Bushing To Dampen NVH
• 11% Stronger Than Original S2 LCA Design
• 19% Lighter Than Original S2 LCA Design
• CNC Machined From Forged 6061 Aluminum
• 40% Lighter Than OEM Arms

This Part Fits:

Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Alpha Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years and are a must-have for enthusiast looking to fine-tune their suspension for maximum handling performance while keeping budget in mind. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. When deciding on a material to base our new design on, we chose very carefully, as there are many inferior annealed and cheap versions of aluminum available on the market today. We chose 6061-T6 because of its excellent strength to weight ratio. With an ultimate tensile strength of over 42,000 PSI, and fatigue strength of 14,000 psi for 500 million cycles – we knew this would be perfect for the Alpha Series Lower Control Arms. The result of our re-engineered lower control arm is a 6061-T6 Forged Aluminum LCA, that is 15% lighter and 7% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this specific combination of bushings allows the most comfort and control under any driving conditions. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2's Rear Lower Control Arms are both..

• Delrin Shock Bushings For Low Friction w/Minimal Deflection
• Tuned Durometer Elastomeric Bushings To Damp Out Harshness
• CNC Machined To A Precise Fit And Finish
• 15% Lighter Than Previous Skunk2 LCAs
• 7% Stronger Than Previous Skunk LCAs
• Forged 6061-T6 Billet Aluminum
• 40% Lighter Than OEM Arms

This Part Fits: