Fits 2006-2012 Toyota RAV4 models including Base, Limited, Sport, and EV.

The SuperPro TRC1143 front lower control arm set is engineered as a comprehensive repair and performance upgrade for the 2006-2012 Toyota RAV4. By replacing the flexible OE-style rubber bushings with proprietary SuperPro bushings, these arms eliminate unwanted suspension movement and maintain precise steering geometry under load. The result is improved handling and more consistent alignment without a negative impact on NVH (Noise, Vibration, and Harshness).

Constructed from high-strength materials, these arms come fully assembled and ready for installation. This kit includes uprated ball joints designed for increased durability compared to standard replacement components. Replacing the factory arms with this SuperPro set solves common bushing wear issues while providing a more responsive driving experience.

• Direct-fit replacement for 2006-2012 Toyota RAV4 (All models)
• High-strength arm construction for optimized longevity
• Pre-installed proprietary SuperPro polyurethane bushings
• Equipped with uprated, heavy-duty ball joints
• Sold as a complete set (Pair) for front left and right positions
• Part Number: TRC1143

SuperPro specialists recommend replacing both front arms at the same time to ensure correct suspension geometry and balanced vehicle operation.

Fits select 2008-2026 Toyota 4Runner, Tundra, Sequoia, Tacoma, Land Cruiser, and Lexus LX570.

The SuperPro TRC1140 Heavy Duty Adjustable Panhard Rod is a critical suspension component for owners of lifted 4x4 vehicles. When a vehicle is raised, the fixed length of the factory Panhard rod pulls the axle to one side, leading to tracking issues and uneven tire wear. This adjustable rod allows you to reset the axle location to its factory center point, rectifying wheel alignment and restoring handling stability.

Engineered in Australia to withstand harsh off-road environments, this rod is constructed from high-strength DOM steel tubing and features forged ends for maximum structural integrity. It comes pre-fitted with SuperPro polyurethane bushings, which are specifically designed to minimize noise, vibration, and harshness (NVH) while providing a maintenance-free alternative to rubber. The off-car adjustment mechanism ensures you can accurately tune your suspension geometry after installing a lift kit.

• Manufacturer Part Number: TRC1140
• Corrects axle shift on vehicles with suspension lifts
• Heavy-duty DOM steel tube construction with forged ends
• High-quality SuperPro bushings for reduced NVH and long service life
• Off-car adjustable for precise alignment correction
• Designed and tested for extreme 4x4 applications

Fits select 2004-2013 Ford Focus and Volvo C30, C70, S40, and V50 models with 18mm ball joints. This SuperPro front lower control arm assembly kit provides a comprehensive front-end refresh by replacing worn-out factory components with high-performance upgrades.

Designed for the enthusiast who demands better handling and durability, these arms eliminate the need for specialized shop equipment. Each arm comes fully assembled with pre-installed SuperPro polyurethane bushings and new ball joints, allowing for a straightforward bolt-on installation. These components are engineered to maintain alignment precision and improve steering response compared to standard rubber bushings.

• Includes both left and right front lower control arms
• Equipped with high-performance 18mm ball joints
• Pre-installed SuperPro polyurethane bushings for reduced deflection
• Ready-to-install assembly—no bushing press required
• Manufacturer Part Number: TRC1135

Fits 2004-2006 Pontiac GTO Base models.

The SuperPro TRC1104 Front Lower Control Arm Set provides a comprehensive performance and durability upgrade for your vehicle's front suspension. These arms are designed as a direct replacement for the factory units, addressing common handling issues caused by worn-out rubber bushings and aging ball joints. By utilizing pre-assembled arms, you can achieve a full front-end refresh without the labor-intensive process of using a hydraulic press to install individual components.

• Manufacturer Part Number: TRC1104
• Fully Assembled: Includes pre-installed SuperPro high-performance bushings and brand-new ball joints for a bolt-on installation.
• Precision Handling: Polyurethane bushings provide better steering response and maintain alignment geometry under load compared to OE rubber.
• Durability: Engineered to withstand harsh driving conditions while offering a significant service life increase over factory parts.
• Complete Set: Includes both driver and passenger side front lower control arms.

Fits select 2003-2008 Acura TSX and Honda Accord models.

The SuperPro TRC1096 complete front lower control arm set provides a comprehensive suspension refresh, restoring steering precision and vehicle stability. These arms are engineered as a performance-oriented alternative to standard replacements, featuring pre-installed SuperPro polyurethane bushings that offer superior durability and resistance to compression compared to factory rubber. Arriving fully assembled, these arms eliminate the need for a hydraulic press, making them a direct-fit solution for both professional and DIY installations.

• Direct replacement for factory front lower control arms
• Pre-installed SuperPro bushings for improved handling response and longevity
• Complete set includes both driver and passenger side assemblies
• Eliminates the labor-intensive process of pressing out old bushings
• Restores alignment geometry and steering feel
• Manufacturer Part Number: TRC1096

Fits 2002-2006 Honda CR-V EX, LX, and SE models.

The SuperPro TRC1094 Front Lower Control Arm Set provides a comprehensive suspension refresh for your vehicle's front end. These arms are engineered to replace worn OE components with high-durability upgrades, improving handling and restoring steering precision. To simplify the installation process, each arm arrives fully assembled with pre-installed SuperPro performance bushings and new ball joints.

• Direct-fit replacement for factory front lower control arms
• Pre-installed SuperPro bushings for increased durability and response
• New ball joints included for a complete overhaul
• Fitter-friendly assembly eliminates the need to press in new bushings
• Manufacturer Part Number: TRC1094
• Sold as a complete set (Pair)

Fits 2003-2009 Lexus GX470 and Toyota FJ Cruiser.

SuperPro Heavy Duty Adjustable End Links are designed to eliminate sway bar link flex and allow for precise neutral positioning, maximizing the effectiveness of your vehicle's roll control system. These links provide a high-strength alternative to worn factory components, featuring a 6060-T5 alloy construction that handles the increased loads of performance or off-road driving. Whether your vehicle is at factory height, lowered, or raised, these adjustable links allow you to correct sway bar geometry for optimal handling.

• Manufactured from high-strength 6060-T5 alloy
• 10mm ball joint studs for heavy-duty applications
• Low-friction ball joints ensure smooth operation and extended service life
• Integrated spanner provision allows for convenient on-car adjustment
• Eliminates sway bar link flex to improve suspension response
• Designed to work with both factory and aftermarket sway bars
• Includes all necessary hardware for installation
• Manufacturer Part Number: TRC1085V

Fits select 1998-2021 BMW, Honda, Isuzu, Mazda, Mitsubishi, and Nissan models including X1, Accord, HR-V, 3, Lancer Evolution, and GT-R.

The SuperPro TRC1085 heavy-duty adjustable end link set is engineered to solve the alignment issues that arise from changing vehicle ride height. Whether your vehicle is lowered for the track or raised for utility, these links allow you to restore a neutral sway bar position, eliminating preload and ensuring the sway bar performs as intended throughout its full range of motion. Unlike standard OE links that are often prone to flexing under load, these HD units provide a more direct transfer of energy for improved handling response.

• Adjustable Length: 140mm to 185mm (5.5" to 7.25") center-to-center.
• Hardware: 10mm low-friction ball joint studs for smooth articulation and long service life.
• Construction: High-strength 6060-T5 alloy link bodies for maximum rigidity.
• On-Car Tuning: Integrated spanner provision allows for precise adjustment without removing the links from the vehicle.
• Performance: Designed to maximize the effectiveness of both factory and aftermarket adjustable sway bars.
• Manufacturer Part Number: TRC1085

Fits select 2015-2023 Audi A3, A3 Quattro, S3, and Volkswagen Golf, GTI, Jetta, and Tiguan models. See the fitment table below for full compatibility details.

The SuperPro TRC1070 complete front lower control arm set provides a comprehensive suspension refresh for your vehicle's front end. Designed for both performance enthusiasts and those seeking a high-quality replacement for worn factory components, these arms arrive fully assembled and ready for installation. By eliminating the need for a hydraulic press to install bushings, this set significantly reduces labor time and complexity during the DIY or professional installation process.

• Complete front lower control arm set (left and right sides included).
• Pre-installed SuperPro polyurethane bushings for enhanced durability and sharper steering response.
• Includes new ball joints for a total front-end suspension overhaul.
• Bolt-on design replaces OE arms without the need for specialized shop equipment.
• Ideal for restoring alignment stability and eliminating play in the front suspension.
• Manufacturer Part Number: TRC1070

Fits select 2005-2010 Subaru Impreza, Legacy, and Outback models.

The SuperPro TRC1058 front lower control arm set is a comprehensive performance and durability upgrade designed to replace worn or soft original equipment components. This kit simplifies the installation process by providing fully assembled arms, eliminating the technical challenge of pressing in new bushings or ball joints. These arms are engineered to restore front-end precision and maintain proper suspension geometry for improved handling response and more consistent tire wear.

Built for both DIY enthusiasts and professional technicians, these control arms feature pre-installed SuperPro polyurethane bushings and high-quality ball joints. SuperPro strongly recommends replacing both arms simultaneously to ensure symmetrical operation and consistent vehicle handling across the front axle.

• Manufacturer Part Number: TRC1058
• Complete pair: Includes both left and right front lower control arms
• Pre-installed SuperPro polyurethane bushings for enhanced steering feedback
• New ball joints included and pre-installed for a direct bolt-on solution
• Engineered for high durability and performance over standard OE rubber components
• Restores factory alignment specs and improves overall suspension stability

Fits select 2003-2012 Ford Fusion, Lincoln MKZ, Lincoln Zephyr, Mazda 6, and Mercury Milan.

SuperPro TRC1056 complete front lower radius arms are designed to provide a significant performance and durability upgrade over factory equipment. These arms arrive fully assembled with pre-installed SuperPro polyurethane bushings and new ball joints, eliminating the need for a hydraulic press and simplifying the installation process for both professional technicians and DIY enthusiasts.

This radius arm set addresses common front-end wandering and vague steering feel by replacing worn OE rubber bushings with high-grade SuperPro components, which maintain alignment geometry under load. Each kit is a comprehensive front-end refresh solution that restores steering precision and handling stability.

• Manufacturer Part Number: TRC1056
• Positions: Front Lower
• Fully assembled with pre-installed bushings and ball joints
• Fitter-friendly design requires no pressing of bushings
• Enhanced durability and steering response compared to OE components

Fits select 2003-2008 Ford Fusion, Lincoln MKZ, Lincoln Zephyr, Mazda 6, and Mercury Milan models.

Refresh your vehicle's front suspension and steering response with the SuperPro TRC1055 Front Lower Control Arm Set. These arms are designed as a high-performance alternative to standard factory replacements, providing increased durability and improved handling characteristics. To ensure a straightforward, "fitter-friendly" installation, these arms arrive fully assembled, eliminating the need to press in new bushings or ball joints in your shop.

Each arm is outfitted with premium SuperPro polyurethane bushings and brand-new ball joints, offering a significant upgrade over original equipment rubber components that are prone to tearing and deflection. This set provides a complete front-end refresh, restoring alignment stability and suspension geometry for a more controlled driving experience.

• Manufacturer Part Number: TRC1055
• Fully assembled for a direct-fit, bolt-on installation
• Pre-installed SuperPro polyurethane bushings for superior longevity
• Includes new, high-quality ball joints
• Engineered to improve steering feel and tire wear

Fits select 2008-2022 Lexus RX350, RX450h, RX450hL, Toyota Highlander, and Toyota Venza.

The SuperPro TRC1054 front lower control arm set provides a comprehensive front-end suspension refresh. These arms are designed to replace worn factory components, restoring original steering precision and maintaining correct suspension geometry. Unlike standard replacement arms that require a hydraulic press to service, these units arrive fully assembled with pre-installed SuperPro bushings, significantly reducing installation time and complexity for both DIYers and professional technicians.

• Direct-fit replacement for factory front lower control arms
• Pre-installed SuperPro bushings for enhanced durability and performance
• Fitter-friendly design eliminates the need for a shop press
• Restores steering response and predictable handling characteristics
• Complete set including both left and right side arms
• Manufacturer Part Number: TRC1054

Fits 2010-2013 Mazda 3 i and S models.

The SuperPro TRC1051 complete front lower control arm set provides a significant performance and durability upgrade over standard rubber components. These arms are designed to be a "fitter-friendly" solution for a front-end refresh, arriving fully assembled with pre-installed SuperPro polyurethane bushings and new ball joints.

This pre-assembled design eliminates the need for a hydraulic press, making it an ideal choice for both professional technicians and DIY enthusiasts. By replacing worn factory arms with this upgraded set, you restore steering precision and improve the service life of your front suspension.

• Direct-fit replacement for OE front lower control arms
• Pre-installed SuperPro bushings offer superior durability and handling compared to rubber
• Equipped with brand-new, high-quality ball joints
• Complete assembly facilitates a straightforward bolt-on installation
• Includes both left and right side arms
• Manufacturer Part Number: TRC1051

Fits 2004-2009 Mazda 3 models including i, S, SP23, and Mazdaspeed submodels.

Refresh your front suspension and improve handling response with the SuperPro TRC1050 Front Lower Control Arm Set. These complete, "fitter-friendly" arms are designed to replace worn factory components with a significant upgrade in durability and performance. By arriving fully assembled, they eliminate the specialized labor and equipment required to press in new bushings or ball joints, making them an ideal choice for both professional technicians and DIY enthusiasts.

Each arm features pre-installed SuperPro polyurethane bushings, engineered to maintain alignment geometry under load while resisting the degradation common with OE rubber units. The set includes high-quality ball joints to ensure a total front-end restoration of your vehicle's steering precision and suspension feel.

• Manufacturer Part Number: TRC1050
• Position: Front Lower (Left and Right)
• Pre-installed SuperPro proprietary polyurethane bushings
• New ball joints included and installed
• Direct bolt-on replacement for factory arms
• Eliminates the need for a hydraulic press during installation

Fits 2014-2019 Ford Fiesta ST.

The SuperPro TRC1048 Front Lower Control Arm Kit is a comprehensive suspension upgrade designed to replace worn factory components while enhancing steering geometry. This kit features high-quality control arms and ball joints pre-fitted with SuperPro’s proprietary performance bushings, engineered to eliminate the excessive movement and deflection found in soft, voided original equipment rubber.

By increasing positive caster, this kit improves steering weight, turn-in response, and high-speed stability. The pre-installed SuperPro bushings are manufactured from high-grip materials that resist degradation and maintain alignment under heavy cornering and braking loads, providing a significant performance boost over the factory front-end setup.

• Manufacturer Part Number: TRC1048
• Built-in caster increase for improved handling and tire contact patch
• Pre-installed SuperPro performance bushings for sharper steering response
• OEM-quality control arms and ball joints ensure precise fitment
• Direct bolt-on replacement for the factory front lower arms
• Improves performance in transitions and under heavy load

Fits select 2006-2018 Audi A3, A3 Quattro, and Volkswagen CC, Eos, Golf, Golf R, GTI, Jetta, Passat, R32, Rabbit, and Tiguan (2.0T).

The SuperPro TRC1045L Roll Control heavy-duty adjustable end link set is engineered to eliminate sway bar link flex and allow for precise neutral positioning of the sway bar, especially on vehicles with modified ride heights. These links are a professional-grade solution for enthusiasts looking to maximize the efficiency of their sway bar setup or replace hard-to-find OE components. Each link features a combination of one standard-length stud and one extended-length stud to accommodate various mounting geometries found on aftermarket coilover systems.

• Adjustable Length Range: 100mm - 120mm (4.0" - 4.8")
• Ball Joint Stud Diameter: 10mm
• Material: High-strength 6060-T5 Alloy links
• Low-friction ball joints for smooth articulation and long service life
• On-car adjustment via integrated spanner provision
• Compatible with both lowered and raised vehicle applications
• Eliminates link flex to ensure immediate sway bar activation
• Manufacturer Part Number: TRC1045L

SuperPro Tip: To ensure proper geometry, always measure from the center of one ball joint stud to the center of the other. Changes in ride height or the use of aftermarket coilovers with relocated mounting tabs may require a different link length than the factory original.

Fits select 1989-2023 Audi, BMW, Honda, and Hyundai models, including Audi 100, BMW 2/3/4 Series/M2, Honda Accord/CR-V, and Hyundai Tiburon.

The SuperPro Roll Control Rear HD Adjustable End Link Set (TRC1045A) is engineered to maximize the effectiveness of adjustable sway bars and restore proper suspension geometry. These heavy-duty links replace thin OE components that are prone to flexing, allowing for immediate sway bar engagement and improved handling response. Featuring an adjustable length of 125mm to 145mm, these links are essential for eliminating sway bar preload on vehicles with lowered or raised ride heights.

• Manufactured from high-strength 6060-T5 alloy for maximum durability and reduced flex
• 125mm to 145mm adjustable length allows for neutral sway bar positioning
• 10mm studs for robust mounting and increased load capacity
• Low-friction ball joints ensure smooth articulation and an extended service life
• Integrated spanner provision for convenient on-car adjustment
• Designed to complement Roll Control adjustable sway bars
• Manufacturer Part Number: TRC1045A

Fits select 1986-2025 Toyota, Nissan, Mazda, Audi, Honda, and Lexus vehicles (2.0T). These SuperPro Roll Control heavy-duty adjustable end links are engineered to eliminate sway bar link flex and allow for precise, neutral sway bar positioning on vehicles with modified ride heights.

Designed to replace hard-to-find OE links or to maximize the effectiveness of adjustable sway bars, the TRC1045 set features a 100mm to 120mm adjustable range. The inclusion of a spanner provision allows for convenient on-car adjustment. Each link is constructed with 6060-T5 alloy and high-quality ball joints for low friction and extended service life, making them ideal for both lowered and raised applications where factory link geometry is no longer optimal.

• Manufacturer Part Number: TRC1045
• Adjustable Length: 100mm - 120mm (4.0" - 4.75")
• Stud Diameter: 10mm ball joint studs
• Material: 6060-T5 Alloy Link Ball construction
• Adjustment: On-car spanner provision for easy tuning
• Compatibility: Works with factory or aftermarket adjustable sway bars
• Application: Suitable for lowered or raised suspension systems

Fits select 2017-2023 Toyota Camry and 2019-2022 Ram 1500.

The SuperPro TRC1042 Front Lower Control Arm Kit provides a significant upgrade in durability and handling over factory components. Designed as a "fitter-friendly" solution, these arms arrive fully assembled with pre-installed SuperPro bushings. This direct-replacement design eliminates the need for a hydraulic press, making it a straightforward installation for professional technicians and DIY enthusiasts alike.

• Complete front lower control arm assembly
• Pre-installed SuperPro performance bushings
• Bolt-on installation requires no bushing pressing
• Restores steering precision and front-end stability
• Manufacturer Part Number: TRC1042

Fitment Applications:

Fits all 2014-2018 Subaru Forester models, including 2.0XT and 2.5i variants.

Refresh your front suspension and restore handling precision with the SuperPro complete front lower control arm set. These arms are designed as a direct replacement for worn-out factory components, offering a significant upgrade in both durability and performance. Engineered to be "fitter friendly," this kit eliminates the need for a hydraulic press, making it an ideal choice for both DIY enthusiasts and professional technicians.

Each arm (MPN: TRC1040) arrives fully assembled and ready for installation. They feature pre-installed, high-performance SuperPro bushings and brand-new ball joints, ensuring a comprehensive refresh of the front-end geometry. By replacing the entire arm, you address multiple wear points simultaneously, improving steering response and tire wear characteristics.

• Fully assembled front lower control arm pair
• Pre-installed SuperPro performance bushings
• Includes new high-quality ball joints
• Bolt-on installation; no pressing required
• Manufacturer Part Number: TRC1040

Fits select 2009-2017 Subaru Forester, Crosstrek, and XV Crosstrek models.

The SuperPro TRC1038 Front Lower Control Arm Set provides a comprehensive suspension refresh and performance upgrade for your Subaru. Designed to be "fitter friendly," these arms arrive fully assembled with pre-installed SuperPro polyurethane bushings and new ball joints. This eliminates the need for a hydraulic press, making the upgrade an efficient bolt-on process for both professional technicians and DIY enthusiasts.

By replacing worn factory arms with these upgraded units, you restore steering precision and improve front-end stability. The SuperPro bushings are engineered for increased durability and better handling characteristics compared to original rubber components, while the included ball joints ensure a complete refresh of the lower suspension geometry.

• Complete set includes both front lower control arms, pre-assembled for convenience
• Equipped with high-performance SuperPro bushings for improved steering response
• Includes new ball joints for a total front-end refresh
• Direct replacement for OE arms; no pressing of bushings required
• Manufacturer Part Number: TRC1038

Fits 2016-2021 Honda Civic (EX, EX-L, EX-T, LX, LX-P, Si, Sport, Sport Touring, and Touring).

The SuperPro TRC1036 front lower control arm set is a "fitter-friendly" suspension solution designed for a comprehensive front-end refresh. These upgraded arms eliminate the labor-intensive process of pressing out old, worn bushings by arriving as a complete, pre-assembled kit. For both the DIY enthusiast and the professional technician, this set offers a straightforward performance and durability upgrade over factory components.

Engineering-focused and built for precision, these arms restore steering feedback and improve handling stability. By replacing factory units with this fully outfitted set, you ensure your 10th-generation Civic maintains optimal geometry and long-term reliability.

• Manufacturer Part Number: TRC1036
• Position: Front Lower (Driver and Passenger Sides)
• Bushings: Pre-installed SuperPro performance bushings
• Installation: Direct bolt-on replacement; no hydraulic press required
• Included: Complete pair of front lower control arms

Vehicle Fitment

Fits 2016-2021 Honda Civic models including EX, EX-L, EX-T, LX, LX-P, Si, Sport, Sport Touring, and Touring.

The SuperPro TRC1030 Front Lower Control Arm Set provides a comprehensive suspension refresh for the 10th-generation Honda Civic. Designed as a direct-fit performance and durability upgrade, these arms replace worn factory components to restore handling precision and steering response. Each arm is engineered to maintain correct suspension geometry while offering a significant strength advantage over aged OE parts.

This kit is designed for a "fitter-friendly" installation. Unlike standard replacement arms that require a hydraulic press to seat new bushings, these SuperPro units arrive fully assembled with bushings already installed. This eliminates the need for specialized shop equipment, making it a straightforward bolt-on solution for both professional technicians and DIY enthusiasts looking to eliminate front-end play and vibration.

• Direct Fit: Replaces factory front lower control arms using existing mounting points.
• Pre-Assembled: Includes pre-installed SuperPro bushings to save time and eliminate the need for a press.
• Front-End Refresh: Restores factory handling and improves durability over standard rubber bushings.
• Complete Set: Includes both left and right front lower control arms.
• Manufacturer Part Number: TRC1030

Fits select 1984-2020 Nissan, Acura, Chrysler, Dodge, Honda, Mazda, and Subaru vehicles including 300ZX, RX-8, Maxima, S2000, and Crosstrek. These SuperPro TRC1025A heavy-duty adjustable end links are engineered to replace hard-to-find or worn OE links and maximize the efficiency of adjustable sway bars.

Built with 6060-T5 alloy links and low-friction ball joints, these links are designed for long-term durability and consistent performance. The adjustable design allows for neutral sway bar positioning, which is critical for maintaining proper suspension geometry on vehicles with lowered or raised ride heights. A built-in spanner provision enables precise on-car adjustment without the need for disassembly.

• Part Number: TRC1025A
• Material: High-strength 6060-T5 Alloy
• Stud Diameter: 10mm
• Adjustment Range: 85mm - 100mm
• Features: Low-friction ball joint for extended service life
• Eliminates sway bar link flex for improved response
• Ideal for both factory and aftermarket adjustable sway bars

SuperPro Specialist Tip: To achieve optimal handling balance, ensure the sway bar is in a neutral, non-preloaded position while the vehicle is at its static ride height.

Fits select 1987-2022 Acura, BMW, Honda, Hyundai, Jeep, Lexus, Mazda, Mitsubishi, Subaru, and Toyota models (see fitment table for specific compatibility).

The SuperPro TRC1025 heavy-duty adjustable end link set is engineered to eliminate sway bar link flex and allow for neutral sway bar positioning on vehicles with modified ride heights. These links are essential for maximizing the effectiveness of adjustable sway bars, particularly when factory links are too long or too short following the installation of lowering springs or coilovers.

• Adjustable Length: 75mm–85mm (3.0"–3.35") measured center-to-center
• 10mm ball joint studs for high-load durability
• Constructed from 6060-T5 alloy for high strength and weight savings
• Low-friction ball joints ensure smooth articulation and long service life
• Integrated spanner provision allows for precise on-car adjustment
• Ideal for correcting sway bar geometry on lowered or raised vehicles
• Replaces worn or hard-to-find OE end links