This Vibrant Performance replacement oil filter bolt is engineered specifically for use with thermostatic oil cooler sandwich plates and adapter kits. It provides the essential connection between the engine block and the oil filter adapter, ensuring a secure, leak-free seal for your external oiling system.

• Manufacturer Part Number: 17175
• Thread Pitch: M18 x 1.5
• Total Bolt Length: 1.75 inches
• Application: Service component for Vibrant thermostatic oil cooler sandwich and adapter kits

Precision-machined to exact tolerances, this fastener replaces worn or damaged mounting bolts to maintain proper stack height and thread engagement, preventing potential oil pressure loss or fluid leaks at the filter mounting point.

Vibrant Performance nylon braided flex hoses provide a durable and flexible plumbing solution for high-performance automotive systems. This -4 AN hose features a reinforced CPE synthetic rubber inner liner protected by a two-tone black and blue nylon braided cover, offering superior abrasion resistance and easy routing through tight engine bays.

This flex hose is engineered for oil, water, fuel, coolant, and vacuum service. While compatible with E85 and methanol, fuel vapors may permeate the CPE liner if fluid is left stagnant for extended periods; for dedicated ethanol applications, a PTFE-lined hose is recommended. Note: This hose is not for use in high-pressure hydraulic or brake systems, nor is it rated for submerged in-tank use.

• Manufacturer Part Number: 11964B
• Hose Size: -4 AN
• Length: 10 Foot Roll
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Inner Liner: Reinforced CPE Synthetic Rubber
• Outer Cover: Nylon Braid
• Finish: Two-Tone Black/Blue

Maintain a secure, leak-free seal in your performance fluid assembly with this Vibrant Performance replacement O-ring. This component is constructed entirely from high-grade FKM (Viton) rubber, offering superior resistance to high temperatures and chemical degradation from fuels and oils compared to standard nitrile seals.

• Manufacturer Part Number: 11490R
• Material: FKM (Viton) Rubber
• Direct replacement for O-rings used in Vibrant fittings #11490 and #11490S
• Engineered for durability in high-performance plumbing and fluid transfer systems

Vibrant Performance 10464 tee adapters are engineered for high-demand fluid delivery systems, providing a reliable transition between AN flare lines and NPT pipe ports. These fittings are commonly used to plumb fuel pumps, oil filters, and external oil pumps where a branching connection is required. Manufactured from 6061 aluminum alloy, they offer a lightweight yet durable solution capable of withstanding the rigors of performance automotive environments.

• Part Number: 10464
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized for corrosion resistance and aesthetics
• Thread A: -10AN Male Flare
• Thread B: 1/2 inch NPT Male Pipe
• Configuration: Tee adapter for branching fluid lines
• Features an anti-leak seal design for consistent, smooth flow

This Vibrant Performance air-to-air intercooler assembly provides high-efficiency thermal management for forced induction systems. Built with robust bar and plate construction, it utilizes a 25% increase in fin density compared to traditional cores to significantly lower intake air temperatures. The ambient air path features a louvered fin design to maximize surface area contact, while the internal charge path uses an offset fin layout to provide maximum cooling with minimal pressure drop.

• Construction: Heavy-duty bar and plate core for superior durability and heat soak resistance.
• End Tanks: Precision TIG-welded cast aluminum end tanks designed for smooth internal airflow.
• Fin Technology: Louvered ambient fins for cooling efficiency and offset charge fins for low restriction.
• Quality Control: Every unit is pressure tested to ensure leak-free performance under high-boost conditions.
• Core Dimensions: 22" W x 9" H x 3.25" Thick
• Inlet/Outlet: 2.5" OD
• Manufacturer Part Number: 12810

Vibrant Performance Horizontal Flow Air-to-Air Intercooler Cores are engineered for custom forced induction applications where thermal efficiency and structural integrity are paramount. Built with heavy-duty bar and plate construction, these cores are designed to withstand high boost pressures while providing superior heat dissipation compared to standard tube and fin designs.

This core utilizes a specialized internal fin configuration to optimize airflow dynamics. The ambient path features a louvered fin design that significantly increases the surface area exposed to external airflow, maximizing heat transfer. Internally, the charge path uses an offset fin design that balances cooling capacity with high flow rates, ensuring minimal pressure loss across the core. This makes it an ideal foundation for high-performance custom intercooler assemblies.

• Part Number: 12915
• Core Type: Horizontal Flow Air-to-Air
• Construction: Bar and Plate
• Dimensions: 20" Width x 11.75" Height x 3" Thick
• Ambient Path: Louvered fin design for maximum surface area
• Charge Path: Offset fin design for minimal pressure drop

The Vibrant Performance 10603 -8AN 45-degree bulkhead adapter fitting provides a secure, leak-free transition for fluid lines passing through firewalls, fuel cells, or mounting brackets. This male AN flare adapter is ideal for high-performance plumbing in fuel, oil, and cooling systems where specific routing angles are required to clear chassis components or maintain a clean engine bay layout.

Constructed from lightweight 6061 aluminum alloy, this fitting is engineered for smooth flow and easy assembly. The durable black anodized finish ensures long-term corrosion resistance and a professional look under the hood. It is designed to integrate seamlessly with most popular fuel pumps, filters, and oil pumps.

• Manufacturer Part Number: 10603
• Fitting Size: -8AN Male Flare
• Angle: 45-Degree Elbow
• Material: 6061 Aluminum Alloy
• Finish: Anodized Black
• Connection Type: Male AN to Male AN Bulkhead
• Note: Bulkhead Nut sold separately

Vibrant Performance StreetPower universal mufflers provide a low-profile aesthetic for enthusiasts looking to maintain a high-performance exhaust system without attracting unwanted attention. This oval muffler is finished in a high-temperature flat black coating, making it ideal for clean, stealthy builds.

The "True Straight Through" internal design features a perforated 304 stainless steel tube wrapped in premium, multi-layer sound suppression materials. This construction ensures unrestricted exhaust flow for maximum horsepower gains while producing the deep, resonant tone Vibrant is known for. The T304 stainless steel body offers excellent corrosion resistance, ensuring long-term durability even in harsh environments.

• Inlet Diameter: 2.5" I.D.
• Outlet Diameter: 3" Single Tip
• Muffler Dimensions: 5" H x 9" W x 15" L
• Overall Length: 20"
• Material: T304 Stainless Steel
• Finish: Flat Black
• Internal Design: Perforated Straight-Through
• Manufacturer Part Number: 1146

This Vibrant Performance Streetpower series muffler provides a durable, high-temperature exhaust solution for custom builds requiring a retro aesthetic. Fabricated entirely from 100% stainless steel, this unit is engineered to withstand continuous operating temperatures of up to 1200°F (649°C). The flat black finish offers a low-profile look, while the dual DTM-style tips provide a distinct performance profile. As a universal component, it is designed to be welded into custom exhaust systems where space allows for the 15-inch body length.

• Manufacturer Part Number: 12335
• Material: 100% Stainless Steel construction
• Finish: Flat Black
• Body Dimensions: 9.5" x 6.75" x 15"
• Inlet Diameter: 2.5" ID
• Tip Diameter: Dual 3" OD
• Tip Style: DTM (Straight Cut, Angled Up)
• Maximum Operating Temperature: 1200°F (649°C)

Vibrant Performance 6061 aluminum transition weld ferrules provide fabricators with a reliable solution for connecting different tubing diameters within an HD Clamp system. This specific ferrule facilitates a clean transition from a 4.5-inch OD to a 4-inch OD, allowing for more versatile intake and charge pipe configurations without compromising seal integrity.

Constructed from high-grade 6061 aluminum, these ferrules are designed to be welded directly to aluminum tubing. Each unit comes equipped with a high-temperature O-ring to ensure a leak-proof seal when mated with Vibrant HD Clamp assemblies, providing a more robust connection than traditional silicone couplers for high-boost applications.

• Manufacturer Part Number: 12674
• Material: 6061 Aluminum
• Transition Size: 4.5" OD to 4" OD
• Compatibility: Vibrant HD Clamp Assemblies
• Included Hardware: (1) Transition Weld Ferrule, (1) O-Ring Seal

This Vibrant Performance 45-degree pipe adapter provides a reliable solution for plumbing oil, fuel, or coolant lines in confined engine bays. Constructed from lightweight 6061 aluminum alloy, this fitting allows for smooth fluid flow and precise routing where straight or 90-degree adapters lack the necessary clearance. The black anodized finish ensures durability and corrosion resistance for long-term service.

Designed to integrate seamlessly with high-performance components such as oil pumps, fuel filters, and fuel pumps, this adapter features an anti-leak seal design to maintain system integrity under pressure. Part number 11332 simplifies complex plumbing layouts by providing a high-quality transition between 3/8" NPT male and female connections.

• Material: 6061 Aluminum Alloy
• Finish: Anodized Black
• Fitting Angle: 45 Degree
• Thread Size: 3/8" NPT (Female to Male)
• Manufacturer Part Number: 11332

Vibrant Performance stainless steel braided flex hoses provide a high-strength plumbing solution for critical automotive systems. This -16 AN hose features a high-tensile stainless steel outer cover for superior abrasion resistance, surrounding a reinforced CPE (Chlorinated Polyethylene) synthetic rubber inner liner designed for durability and flexibility.

• Manufacturer Part Number: 11933
• Size: -16 AN
• Length: 20 foot roll
• Inner Liner: Reinforced CPE synthetic rubber
• Outer Cover: Stainless steel braid
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Compatibility: Oil, water, fuel, coolant, and vacuum service

While suitable for E85 and methanol, please note that fuel fumes may permeate through the CPE liner if fuel is left stagnant for long periods; for dedicated E85 applications, consider PTFE-lined hoses. This hose is NOT for use as a brake line, high-pressure hydraulic line, or for in-tank submersion.

Vibrant Performance non-swivel high-flow hose end fittings are engineered specifically for use with PTFE-lined flex hoses, providing the leak-free reliability required by professional builders. Each fitting is precision CNC-machined from 6061 aluminum alloy with a full-flow internal design to minimize fluid restriction in high-demand systems.

• Material: CNC-machined 6061 aluminum alloy for strength and precision
• Finish: Black hard anodized for superior corrosion resistance and durability
• Assembly: Includes an aluminum olive that compresses to the PTFE liner for a secure, simple, and leak-free seal
• Configuration: 30-degree angle, non-swivel design
• Part Number: 28306

This fitting is ideal for race fuel systems, nitrous, cooling, oil, and power steering applications. Please note: these hose ends are specifically designed for PTFE-lined hose and are not suitable for brake or high-pressure hydraulic line applications.

The Vibrant Performance 28016 is a straight, non-swivel High Flow Hose End Fitting engineered specifically for use with PTFE-lined flex hoses. CNC-machined from 6061 aluminum alloy, this fitting features a full-flow internal design to maximize fluid volume while maintaining leak-free reliability in demanding high-performance systems.

Each hose end includes a precision aluminum olive that compresses directly to the PTFE liner, simplifying the assembly process and ensuring a secure, mechanical seal. Finished in black hard anodizing for superior corrosion resistance, these fittings are ideal for race fuel systems, nitrous, cooling, oil, and power steering applications. Note that these components are not suited for brake or high-pressure hydraulic line systems.

• Manufacturer Part Number: 28016
• Size: -16AN
• Configuration: Straight (Non-Swivel)
• Material: CNC Machined 6061 Aluminum Alloy
• Finish: Black Hard Anodized
• Hose Compatibility: Designed exclusively for PTFE-lined flex hoses
• Included Hardware: Compression Aluminum Olive

The Vibrant Performance 29990 is a high-performance 90-degree tight radius forged hose end designed specifically for use with PTFE-lined flex hoses. Engineered for plumbing configurations where space is at a premium, this non-swivel fitting provides a compact, reliable connection without compromising fluid flow dynamics.

Constructed from lightweight 6061 aluminum alloy, these fittings feature a black anodized finish for superior corrosion resistance and a professional aesthetic. The forged design ensures maximum strength and durability, while the internal geometry promotes smooth flow and a dependable anti-leak seal for secure assembly.

• Part Number: 29990
• Fitting Size: -10AN
• Fitting Angle: 90 Degree (Tight Radius)
• Fitting Style: Non-Swivel Forged
• Material: 6061 Aluminum Alloy
• Finish: Anodized Black
• Compatibility: For use with Vibrant PTFE lined flex hoses

This Vibrant Performance -16 AN 45-degree PTFE hose end is engineered for high-demand fluid transfer where reliability is non-negotiable. CNC machined from 6061 aluminum alloy, these fittings feature a full-flow, one-piece design that eliminates potential leak points while maintaining maximum flow capacity. Designed exclusively for use with Vibrant PTFE-lined flex hose, each fitting includes an aluminum olive that compresses directly to the PTFE liner for a secure, leak-free seal even under high pressure.

The black hard anodized finish provides superior corrosion resistance and a professional look for race fuel systems, nitrous, oil, power steering, and coolant applications. Note that these non-swivel fittings are not intended for use in brake or high-pressure hydraulic line applications.

• Brand: Vibrant Performance
• Part Number: 28416
• Fitting Size: -16 AN
• Fitting Angle: 45 Degree
• Material: CNC Machined 6061 Aluminum Alloy
• Finish: Black Hard Anodized
• Inclusion: Aluminum compression olive
• Compatibility: Designed for use with Vibrant PTFE-lined flex hose

The Vibrant Performance Pinless HD 2.0 Clamp (MPN: 32540) provides a highly secure and robust connection for high-pressure charge piping and intake systems. This 5-inch O.D. clamp features an innovative integrated clasp mechanism with a safety lock push-button, successfully replacing the traditional quick-release pin. This pinless design eliminates the risk of losing small components or dealing with pin malfunctions caused by debris buildup in the engine bay.

• Pinless clasp mechanism delivers a more secure connection than traditional quick-release pins
• Integrated safety lock push-button prevents unintentional opening during operation
• Precision machined for 5-inch O.D. components
• Durable anodized black finish for superior corrosion and heat resistance
• Ideal for turbocharger and intercooler piping applications
• Manufacturer Part Number: 32540

Vibrant Performance non-swivel, high-flow hose end fittings are engineered specifically for use with PTFE-lined flex hoses. This one-piece 90-degree fitting (part #28908) provides professional-grade reliability and a leak-free seal for high-demand automotive plumbing. CNC-machined from 6061 aluminum alloy, these fittings feature a full-flow design that minimizes restriction in critical systems.

• Size: -8AN
• Angle: 90 Degree
• Material: CNC-Machined 6061 Aluminum Alloy
• Finish: Black Hard Anodized for corrosion resistance
• Included Hardware: Aluminum olive for secure compression to the PTFE liner
• Applications: Race fuel systems, nitrous, oil, power steering, and coolant

Note: These fittings are designed exclusively for PTFE-lined hoses and are not suitable for brake or hydraulic line applications.

This Vibrant Performance Female AN Flare Union Adapter (MPN 10707) provides a reliable, leak-free connection for high-flow fluid systems. Engineered for professional plumbing, these straight unions are commonly used to bridge components like oil pumps, fuel pumps, and fuel filters where a secure, high-volume transition is required.

Precision-machined from 6061 aluminum alloy, this adapter is both lightweight and durable enough for the rigors of performance street and racing environments. The interior is designed for smooth, laminar flow to prevent turbulence and pressure drops. Finished in black anodizing, it offers excellent corrosion resistance and a clean aesthetic for any engine bay.

• Size: -20AN Female to -20AN Female
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized
• Connection Type: Straight Union
• Manufacturer Part Number: 10707

Vibrant Performance tight radius forged hose end fittings provide a compact, high-flow solution for plumbing professional fuel, oil, and coolant systems. These swivel-style fittings are precision-engineered from 6061 aluminum alloy for maximum weight savings and durability. The forged 90-degree design allows for a tighter radius than standard mandrel-bent fittings, making them ideal for plumbing in cramped engine bays where space is at a premium.

• Manufacturer Part Number: 26904
• Size: -8AN to 3/8" NPT (Male)
• Angle: 90 Degree
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized
• Style: Tight Radius Forged (Swivel)
• Compatibility: For use exclusively with Vibrant Braided Flex Hoses

The black anodized finish provides superior corrosion resistance, while the swivel-style construction ensures easy assembly and proper clocking after installation. Each fitting is designed to deliver a consistent, anti-leak seal and smooth internal flow characteristics.

Vibrant Performance swivel-style Banjo Hose End Fittings offer a reliable, lightweight plumbing solution for high-performance fluid systems. Engineered from 6061 aluminum alloy, these fittings facilitate smooth fluid flow and simplified assembly in tight engine bay configurations where a traditional 90-degree fitting might not clear obstacles.

• Part Number: 24085
• Hose End Size: -8AN
• Banjo Size: 16mm (5/8")
• Fitting Style: Straight Swivel
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized
• Internal design ensures an anti-leak seal and unrestricted flow

The integrated swivel allows for precise clocking and alignment after the hose has been assembled. Please note that the required Banjo Bolt is sold separately. Designed for compatibility with Vibrant Performance braided flex hoses and equivalent AN-spec lines.

Vibrant Performance non-swivel High Flow Hose End Fittings (MPN 28008) are engineered specifically for use with PTFE-lined flex hose, providing a reliable, leak-free connection for high-performance plumbing. Each fitting is CNC-machined from 6061 aluminum alloy with a full-flow design to ensure maximum fluid volume and minimal pressure drop.

Designed for straightforward assembly, these fittings include an aluminum olive that compresses against the PTFE liner for a mechanical seal. The black hard-anodized finish provides excellent corrosion resistance and durability in demanding environments like race fuel systems, oiling, and cooling circuits.

• Fitting Size: -8AN
• Fitting Angle: Straight
• Material: CNC Machined 6061 Aluminum Alloy
• Finish: Black Hard Anodized
• Included Component: Aluminum compression olive
• Compatibility: For use with PTFE-lined flex hose only
• Suitable Applications: Race fuel systems, Nitrous, Oil, Power Steering, and Cooling
• Exclusions: Not for use in brake or hydraulic line applications
• MPN: 28008

The Vibrant Performance 11982R -12 AN Nylon Braided Flex Hose is engineered for high-performance fluid transfer in oil, fuel, coolant, water, and vacuum systems. This hose features a durable two-tone black and red nylon braided cover that provides superior abrasion resistance compared to traditional rubber hoses. The outer braid protects a reinforced CPE (Chlorinated Polyethylene) synthetic rubber inner liner, ensuring reliability across a wide range of automotive plumbing applications.

• Manufacturer Part Number: 11982R
• Size: -12 AN
• Length: 20-foot roll
• Construction: Reinforced CPE synthetic rubber liner with nylon braided cover
• Operating Temperature: -40°F to 300°F (-40°C to 150°C)
• Fluid Compatibility: Oil, fuel, water, coolant, and vacuum

While suitable for E85 and methanol use, note that fuel fumes may permeate the CPE liner during long periods of stagnation. This hose is not recommended for high-pressure hydraulic applications, brake lines, or in-tank fuel submersion.

The Vibrant Performance 16948 adapter fitting provides a reliable, high-flow connection for performance plumbing systems. This 45-degree elbow features a -10AN male flare on one side and a -10AN male ORB (Straight Cut) port on the other, utilizing a swivel design that allows for precise clocking and simplified hose routing in tight engine bays.

• CNC-machined from lightweight 6061 aluminum alloy for strength and durability
• Black anodized finish provides superior corrosion resistance
• Includes a high-quality O-ring for a secure, anti-leak seal
• Full swivel design allows for easy orientation during assembly
• Fits most popular fuel pumps, oil pumps, filters, and other ORB-threaded components
• Manufacturer Part Number: 16948

The Vibrant Performance 10873 -8AN Female Tee Adapter is a precision-engineered solution for complex fluid plumbing. Part of the 938 series, this adapter is designed to provide a reliable, leak-free connection point for oil pumps, fuel pumps, fuel filters, and other critical system components. Its lightweight 6061 aluminum alloy construction ensures durability without adding unnecessary mass to your engine bay.

Built for high-flow applications, this adapter features smooth internal transitions to minimize turbulence and pressure drop. Each fitting is finished in a durable black anodized coating to resist corrosion and maintain a professional appearance in harsh environments. Whether you are plumbing a custom fuel rail or a complex oiling system, these adapters offer the ease of assembly and security required for high-performance use.

• Part Number: 10873
• Fitting Size: -8AN
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized
• Configuration: Female Tee (938 Series)
• Compatibility: Suitable for oil, fuel, and other common automotive fluids

The Vibrant Performance 10470 On Run Tee Adapter is engineered for high-performance plumbing, providing a reliable transition between AN flare and NPT pipe threads. Constructed from lightweight 6061 aluminum alloy, this fitting is designed for plumbing oil pumps, fuel pumps, filters, and other critical fluid systems where space and flow efficiency are paramount.

• Configuration: Male -3AN Flare to 1/8" NPT Male Pipe (On Run)
• Material: CNC-machined 6061 Aluminum Alloy
• Finish: Black Anodized for superior corrosion resistance and durability
• Flow: Designed with smooth internal transitions to ensure unrestricted fluid movement
• Seal: Precision-machined threads for a consistent, leak-free connection
• Part Number: 10470

This Vibrant Performance adapter fitting provides a secure, leak-free transition from a -8AN ORB (O-Ring Boss) port to a 1/2-inch hose barb. Precision-machined from 6061 aluminum alloy, this lightweight component is designed for plumbing fuel pumps, oil pumps, fuel filters, and other high-performance fluid system components requiring reliable flow.

The fitting is engineered with smooth internal geometry to minimize turbulence and maintain flow efficiency. It includes a high-quality O-ring to ensure a positive seal against the mating port. The durable black anodized finish provides long-lasting corrosion resistance and a professional aesthetic for custom engine bay plumbing.

• Manufacturer Part Number: 11319
• Material: 6061 Aluminum Alloy
• Finish: Anodized Black
• Fitting Side A: Male -8AN ORB (3/4-16 Thread)
• Fitting Side B: 1/2" Hose Barb
• Included: Sealing O-Ring

The Vibrant Performance 10746 -16AN Tee Adapter provides a reliable plumbing solution for high-performance fuel and oil systems. This fitting is constructed from lightweight 6061 aluminum alloy and features an integrated female swivel side, allowing for precise clocking and easier assembly in tight engine bays without twisting your lines.

Designed for smooth flow and an anti-leak seal, these adapters are commonly used on high-volume oil pumps, fuel pumps, and fuel filters. The black anodized finish ensures durability and corrosion resistance in harsh automotive environments.

• Manufacturer Part Number: 10746
• Fitting Size: -16AN (Male and Female)
• Configuration: Tee with Female Swivel
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized
• Application: Universal oil and fuel system plumbing

The Vibrant Performance swivel-style Banjo Hose End is engineered specifically for use with PTFE-lined flex hoses. Precision-machined entirely from 6061 aluminum alloy, this lightweight fitting ensures an anti-leak seal while maintaining smooth fluid flow. The integrated swivel design simplifies assembly by allowing for easier clocking and alignment in tight engine bays or chassis locations.

• Part Number: 29918
• Hose Size: -3 AN
• Bolt/Thread Size: 1/8 NPT
• Material: 6061 Aluminum Alloy
• Finish: Black Anodized
• Compatibility: Designed for PTFE Lined Flex Hose only
• Construction: Swivel-style for easier installation

The Vibrant Performance 12963 Horizontal Flow Air-to-Air Intercooler Core is engineered for high-performance forced induction applications where cooling efficiency and structural integrity are paramount. This core utilizes robust Bar and Plate construction, allowing it to withstand high boost pressures while providing a significant thermal sink for compressed intake air.

To maximize heat dissipation, the ambient path features a unique louvered fin design that increases the core's effective surface area. Internally, the charge path uses an offset fin configuration designed to create the necessary turbulence for heat transfer while ensuring minimal pressure drop. This balance of airflow and cooling capacity makes it an ideal foundation for custom-fabricated intercooler assemblies.

• Manufacturer Part Number: 12963
• Construction: Bar and Plate
• Flow Configuration: Horizontal Flow
• Core Dimensions: 25" Width x 11.75" Height x 4.5" Thickness
• Ambient Fin Style: Louvered
• Charge Fin Style: Offset