Fits select 1986-2001 Acura Integra and 1988-2001 Honda Civic, CRX, and CR-V models. These heavy-duty Whiteline rear upper control arms are designed to provide precise on-car camber adjustment, allowing you to optimize your vehicle's alignment for improved traction, increased cornering grip, and extended tire life.

Constructed from premium anodized alloy, these arms feature a long-lasting protective barrier against corrosion and wear. The kit utilizes Whiteline's latest synthetic elastomer bushing technology, formulated for superior resistance to oil, grease, ozone, and weathering. This specially bonded design ensures the strength and durability required for high-load suspension applications.

• Provides on-car camber adjustability to correct tire wear and handling behavior
• Improves cornering grip and overall rear-end stability
• Anodized alloy construction for maximum corrosion resistance
• Synthetic elastomer bushings resist environmental degradation and oil contamination
• Manufacturer Part Number: KTA332
• Includes: Pair of 2 rear upper control arms

Fits select 2008-2014 Subaru Impreza, WRX, and STI models.

The Whiteline BSK012 is a comprehensive suspension solution designed to reduce body roll and neutralize understeer. This kit replaces the restrictive factory components with heavy-duty 22mm bars to increase chassis rigidity and steering response. By significantly reducing body flex during cornering and rapid lane changes, it maintains a more consistent contact patch for improved grip and driver confidence.

The kit features a 2-point adjustable front bar and a 3-point adjustable rear bar, allowing for precise chassis tuning. The included heavy-duty end links utilize forged ends and steel ball joints to eliminate the deflection found in original equipment. To ensure long-term performance, the synthetic elastomer bushings are designed with internal bore knurling and grease retention lips for superior lubrication and noise-free operation.

• Front Sway Bar: 22mm 2-point adjustable
• Rear Sway Bar: 22mm 3-point adjustable
• Bushings: Synthetic elastomer resistant to oil, grease, and ozone
• End Links: Heavy-duty adjustable alloy links with up to 25mm of adjustment
• Lateral Locks: DIY lateral locks prevent bar shifting under cornering loads
• Finish: Protective plating and powder coating for long-term corrosion resistance
• Grease: Includes molybdenum disulphide (LM) based grease
• Manufacturer Part Number: BSK012

Fits select 2008-2014 Subaru Impreza and WRX models (Base, Limited, Premium, Sport, and WRX submodels). This Whiteline Grip Series Stage 1 Kit (GS1-SUB005) is a comprehensive suspension solution designed to eliminate body roll, improve turn-in response, and provide a lowered, aggressive stance without sacrificing ride quality.

The kit features progressive rate lowering springs that provide a 25mm drop front and rear, utilizing spring rates of 4.9kg/mm (274lb/in) at the front and 3.7kg/mm (207lb/in) at the rear. To manage lateral loads, the package includes 22mm heavy-duty sway bars: a 2-point adjustable bar for the front and a 3-point adjustable bar for the rear. These bars are paired with adjustable drop links featuring heavy-duty steel ball joint ends that allow for on-car length adjustment up to 25mm to eliminate sway bar preload.

• Manufacturer Part Number: GS1-SUB005
• Front Sway Bar: 22mm, 2-point adjustable with lateral locks
• Rear Sway Bar: 22mm, 3-point adjustable
• Lowering Springs: 25mm drop; 4.9kg/mm (F) / 3.7kg/mm (R) rates
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips
• Hardware: Includes adjustable drop links, DIY lateral locks, and molybdenum disulphide (LM) grease
• Construction: Cold-rolled European steel with protective powder coating and anodized alloy components

By replacing soft OE bushings and undersized factory bars, this kit maintains alignment angles and reduces chassis flex during high-speed cornering and lane changes. All metal components are treated with a corrosion-resistant plating to ensure long-term durability in harsh environments.

Fits 2008-2014 Subaru Impreza WRX STI models, including Limited and Special Edition. This Whiteline Grip Series Stage 1 Kit (GS1-SUB004) is an engineered handling solution designed to reduce body roll and improve steering response while maintaining ride quality. By combining matched lowering springs with adjustable sway bars and heavy-duty links, this kit provides a comprehensive suspension upgrade that eliminates the flex and vague feel associated with original equipment components.

The system features 22mm adjustable sway bars (2-point front, 3-point rear) that allow you to fine-tune the chassis balance for specific driving conditions. These bars are paired with progressive rate springs cold-rolled in Europe for high durability and consistent performance. The included heavy-duty end links allow for on-car length adjustment to eliminate sway bar preload during installation, ensuring the suspension geometry remains optimal even at a lower ride height.

• Front Springs: 4.9kg/mm (274lb/in) rating with a 25mm drop
• Rear Springs: 3.7kg/mm (207lb/in) rating with a 25mm drop
• Front Sway Bar: 22mm 2-point adjustable with forged ends
• Rear Sway Bar: 22mm 3-point adjustable with forged ends
• End Links: Heavy-duty steel ball joint ends with up to 25mm of adjustment
• Mounts: Synthetic elastomer bushings with internal bore knurling and grease retention lips
• Protection: Powder-coated and plated metal components for superior corrosion resistance
• Included: Front and rear sway bars, lowering springs, drop links, lateral locks, and molybdenum disulphide grease

The Whiteline WEK004 Vehicle Essentials Kit is a comprehensive handling solution designed for select 2004-2018 Audi and Volkswagen models. By bundling critical suspension bushings and geometry correction components, this kit addresses common steering vagueness and improves overall mechanical grip.

This kit features Whiteline’s renowned front anti-lift and caster kit alongside high-performance control arm bushings. These components are engineered to optimize the tire contact patch during cornering, improving turn-in response and directional stability. Each bushing is manufactured from a specialized synthetic elastomer that maintains its properties against oil, grease, and ozone, providing a significant upgrade over factory rubber without the harshness often associated with inferior materials.

• Optimizes caster alignment to maximize tire contact patch and improve turn-in.
• Synthetic elastomer formulation provides high resistance to oil, grease, and weathering.
• Internal grease reservoirs facilitate continuous self-lubrication for low-friction operation.
• Protective plating and powder coating ensure long-lasting resistance to corrosion and road debris.
• Includes extreme pressure molybdenum disulphide (LM) based grease and detailed install guide.
• Manufacturer Part Number: WEK004

Fits select 2017-2025 Tesla Model 3 and 2020-2025 Tesla Model Y.

The Whiteline KTA476 front lower lateral control arm is a high-performance suspension upgrade engineered to eliminate the compliance and deflection inherent in factory rubber bushings. By utilizing a premium spherical bearing, this arm maintains precise suspension geometry and wheel alignment under heavy cornering and braking loads. This direct-fit solution provides sharper steering response, improved turn-in, and a more communicative feel for both street and track-driven Tesla Model 3 and Model Y vehicles.

• Replaces factory front lower lateral control arm with a high-strength upgraded unit
• Premium spherical bearing eliminates bushing flex for consistent geometry
• Delivers sharper steering response and enhanced cornering stability
• Direct-fit design installs into factory mounting points
• Ideal for maintaining alignment under high-load conditions
• Manufacturer Part Number: KTA476

Fits select 1982-2003 Chevrolet S10, GMC S15, GMC Sonoma, and Isuzu Hombre models. This Whiteline body mount bushing set (W93544) is designed to replace worn OE bushings, restoring vehicle chassis alignment and structural stability.

Engineered to withstand harsh environments, these bushings utilize Whiteline’s specialized formulation technology, providing superior resistance to oil, grease, ozone, and weathering. The metal components feature a protective plating that acts as a durable skin, outperforming standard paint to resist corrosion and ensure longevity in demanding conditions. The specially bonded design is optimized for the high load-bearing requirements typical of truck chassis mounting points.

• Fits 1982-2003 Chevrolet S10, GMC S15/Sonoma, and 1996-2000 Isuzu Hombre
• Advanced formulation resists chemical degradation and environmental weathering
• Protective metal plating for maximum corrosion resistance
• High load-bearing bonded design for increased strength
• Installation guide included for straightforward fitment
• Manufacturer Part Number: W93544

Fits 1990-1999 BMW 318i, 318is, 323i, 325i, 328i, and M3.

The Whiteline Rear Subframe Mount Bushing Kit is engineered to replace high-compliance factory rubber bushings, significantly reducing rear cross member misalignment and unwanted movement. By stabilizing the subframe, this kit provides a more positive feel and precise chassis control during hard cornering and aggressive driving. While recommended for motorsport applications, the advanced material properties provide the durability needed for performance street use.

Constructed from Whiteline's proprietary synthetic elastomer, these bushings offer superior resistance to oil, grease, ozone, and harsh weather conditions. The design features internal grease reservoirs for continual self-lubrication, ensuring optimum friction management and a quiet, long-lasting service life without the squeaking associated with lesser polyurethane alternatives.

• Part Number: KDT988
• Material: High-performance synthetic elastomer
• Stabilizes rear subframe for improved suspension geometry
• Resistant to automotive fluids and environmental degradation
• Internal grease reservoirs for self-lubrication
• Kit Includes: 8 Bushings, 4 Inner Tubes, and Installation Grease

Fits select 2005-2026 Nissan Frontier, 2005-2012 Pathfinder, 2005-2015 Xterra, and 2009-2012 Suzuki Equator.

A common limitation of modern independent front suspension (IFS) 4WD vehicles is the narrow alignment adjustment range, which becomes critical when the vehicle is lifted more than 1 inch. Lifting often leads to insufficient caster and camber, ball joint binding, and contact between the upper control arm and the coilover strut. The Whiteline KTA301 fixed offset Upper Control Arm (UCA) set is engineered as a comprehensive solution for vehicles with 30mm to 70mm (1.2" to 2.75") of lift.

These arms utilize Whiteline’s proprietary GIIRO bushing technology, providing a maintenance-free, grease-free pivot point that offers superior articulation without the noise or harshness of traditional poly bushings. The fixed geometry corrects suspension sweep and restores essential alignment specs for improved high-speed stability and tire wear.

• Manufacturer Part Number: KTA301
• Optimized for lifts between 30mm and 70mm
• Increases caster by +2.5 to +3.5 degrees
• Provides up to 1.5 degrees of negative camber increase (at approx. 50mm lift)
• Enhanced clearance for coilover struts at full droop
• Maintenance-free GIIRO bushing technology for high articulation
• Includes: Left and Right Upper Control Arms

The Whiteline KLC140-275 Universal Heavy Duty Adjustable Sway Bar Link Kit is engineered to maximize the effectiveness of your vehicle's sway bar system. Factory links are often prone to flex or premature wear, which hinders suspension performance. These heavy-duty replacements utilize high-spec, lightweight components to ensure immediate load transfer for improved grip and handling precision.

Featuring a 270mm to 295mm window of adjustability, these links allow you to eliminate sway bar preload caused by ride height changes, aftermarket coilovers, or corner balancing. By ensuring the sway bar remains neutral at rest, you achieve more predictable roll control. The 10mm ball-style studs provide smooth, articulated movement without the deflection common in rubber-bushed OE links.

• Adjustment Range: 270mm - 295mm
• Ball Stud Diameter: 10mm
• Joint Type: Ball/Ball Style
• Contents: Kit contains 2 adjustable links
• Manufacturer Part Number: KLC140-275

Fits select 2004-2019 Ford Escape and Focus, Mazda 3 and 5, and Volvo C30, C70, S40, and V50.

The Whiteline WA402 Rear Upper Control Arm provides a complete solution for restoring or upgrading your vehicle's rear suspension geometry. Rather than the labor-intensive process of pressing out old bushings and risking damage to the factory arms, this complete assembly comes pre-fitted with Whiteline’s signature synthetic elastomer bushings. These arms are engineered to improve vehicle stability, enhance handling precision, and maintain consistent alignment during high-load cornering and braking.

Built to withstand harsh environments, each arm features a protective E-coat finish that provides a hard skin tougher than conventional paint for long-term corrosion resistance. The internal grease reservoirs within the bushings ensure continual self-lubrication, while the specially bonded design optimizes strength for high-load applications.

• Durable Construction: Synthetic elastomer formulation resists oil, grease, ozone, and weathering for extended service life.
• Direct Fit: Designed for the installer to reduce the need for specialized press tools or equipment.
• Corrosion Resistance: Protective E-coat plating withstands tough road conditions and resists oxidation.
• Self-Lubricating: Internal grease reservoirs provide optimal friction management.
• Included Hardware: Supplied with extreme pressure molybdenum disulphide (LM) based grease.
• Manufacturer Part Number: WA402
• Warranty: Backed by a limited lifetime warranty.

Fits select 1966-2004 Nissan, Infiniti, and Mitsubishi vehicles, including 240Z, 280Z, 510, Pathfinder, Frontier, and Xterra. Worn radius rod bushings significantly impact braking performance and steering precision, as they absorb the bulk of the longitudinal load during deceleration. The Whiteline Plus W81075 replaces these soft or perished factory units with a high-performance synthetic elastomer formulation designed for long-lasting durability and predictable handling.

These bushings feature internal grease reservoirs for self-lubrication and are engineered for a straightforward installation without the need for specialized shop tools. The included metal components feature a protective plating that acts as a hard skin, resisting corrosion and weathering even in harsh undercar environments.

• Material: Advanced synthetic elastomer resistant to oil, grease, and ozone.
• Bushing Type: Front Radius Rod - To Chassis.
• Hardware: Protective plating for superior corrosion resistance.
• Lubrication: Internal reservoirs provide continual friction management.
• Included: Extreme pressure molybdenum disulphide (LM) based grease.
• Manufacturer Part Number: W81075

Fits select 2003-2009 Dodge Ram 1500, 2500, and 3500 models.

The Whiteline W73823 bushing kit is engineered to replace worn factory rubber components, providing a significant upgrade to your truck's suspension geometry. By utilizing high-quality synthetic elastomer, these bushings dramatically reduce axle misalignment and unwanted movement during suspension travel. This results in a more positive steering feel, improved handling stability, and increased component durability under heavy loads or off-road conditions.

Each kit includes extreme pressure molybdenum disulphide (LM) based grease, designed to ensure a long service life and quiet operation by minimizing friction and preventing binding within the spring eyes and shackles.

• Replaces front and rear spring eye and shackle bushings
• Reduces suspension misalignment for improved tracking and feel
• Includes extreme pressure molybdenum disulphide grease
• Durable synthetic elastomer construction
• Manufacturer Part Number: W73823

Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

The Whiteline W73820 leaf spring and shackle bushing kit is a critical service item for any leaf-sprung vehicle. High mileage and heavy payloads cause original rubber bushings to degrade, leading to handling slop and suspension noise. This kit replaces worn factory bushings with Whiteline's signature red polyurethane, engineered for superior abrasion resistance, high load-bearing capability, and lasting flexibility.

• Durable Polyurethane: Formulated for high tensile strength and resistance to oil, grease, ozone, and harsh weathering.
• Corrosion Resistant Hardware: Metal components feature protective plating that acts as a hard skin, outperforming conventional paint in tough off-road or towing conditions.
• Internal Grease Reservoirs: Features integrated reservoirs for continual self-lubrication and optimal friction management.
• Complete Installation Kit: Includes detailed instructions and extreme pressure molybdenum disulphide (LM) grease for extended service life.
• Direct Fitment: Designed for straightforward installation into factory spring eyes and shackle points without specialized shop equipment.

Manufacturer Part Number: W73820

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (Base, Golden Eagle, Laredo, Limited, Renegade, SL, and SR trims).

A critical service item for leaf-sprung vehicles, Whiteline W73814 bushings replace worn-out factory rubber components that often degrade under heavy loads and off-road articulation. These signature red bushings are engineered to restore suspension precision and maintain alignment geometry in demanding environments, including 4WD use and towing. Constructed from high-grade synthetic elastomer, they offer a specific balance of flexibility and tensile strength to handle the shearing forces common in leaf spring applications.

• Replaces deteriorated OE bushings to eliminate excessive play and vibration.
• Superior abrasion and chemical resistance to oil, grease, ozone, and weathering.
• High load-bearing capacity designed for off-road and towing conditions.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for reduced friction and extended service life.
• Manufacturer Part Number: W73814

Fits select 1986-2004 Nissan Frontier, Xterra, Pickup, and D21 models.

Leaf spring bushings are a critical service item for any leaf-sprung vehicle. High mileage and heavy load-carrying often cause excessive wear on factory rubber bushings, leading to suspension play and instability. Whiteline Plus W71060 bushings are engineered from a signature synthetic elastomer formulation designed to provide outstanding abrasion resistance, high load-bearing capability, and increased tensile strength for trucks, utes, and towing applications.

These bushings feature internal grease reservoirs for continual self-lubrication and optimum friction management. The material is resistant to oil, grease, ozone, and weathering, ensuring long-term performance in harsh undercar environments. Designed for straightforward installation, this kit reduces the need for specialized equipment.

• Manufacturer Part Number: W71060
• Material: Proprietary synthetic elastomer
• Includes: Rear spring-eye and shackle bushings
• Hardware: Extreme pressure molybdenum disulphide (LM) based grease included
• Finish: Signature Black
• Resistant to oil, grease, and ozone weathering

Fits 1965-1982 Chevrolet Corvette models including Base, Stingray, Collector's Edition, and Silver Anniversary Edition.

Whiteline power steering arm bushings are engineered to restore steering precision and feedback to your classic Corvette. Over decades, factory rubber bushings degrade due to age, engine bay heat, and oil exposure, leading to vague steering response. These high-performance replacements are designed to handle the increased loading of modern tire compounds and aggressive alignment settings while providing a more direct connection to the road.

• Engineered to outlast factory bushings and improve steering tactile feedback
• Resistant to common engine bay contaminants such as oil and road grime
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended service life
• Direct replacement for worn OE steering arm bushings
• Manufacturer Part Number: W13408

Fits 2017-2026 Tesla Model 3 and 2020-2024 Tesla Model Y.

Upgrade your Tesla's suspension geometry and front-end grip with the Whiteline KTA406 Front Lower Compliance Control Arm Set. Engineered to replace the soft factory compliance bushings, this heavy-duty set incorporates Whiteline's Anti-Lift Kit (ALK) technology to improve traction and steering precision under load. By reducing movement in the control arm, these arms ensure more consistent alignment settings during spirited driving and heavy braking.

The KTA406 kit features dual offset bushings that provide increased static caster and dynamic negative camber gain. This results in a more communicative steering feel, increased steering weight, and a sharper turn-in. Whether you are looking to maximize cornering performance or improve tire longevity by reducing unwanted toe change, these arms offer the mechanical adjustment and durability needed for the Model 3 and Model Y platforms.

• Increased Caster & Camber: Dual offset bushings provide optimized geometry for better cornering grip.
• Steering Precision: High-performance bushings reduce compliance for a more direct steering feel.
• Anti-Lift Geometry: Specifically tuned to improve front-end traction and reduce nose-dive.
• Durable Construction: Heavy-duty arms designed for long-term reliability and performance.
• Part Number: KTA406

Fits 2014-2018 Subaru Forester (2.0XT / 2.5i).

Restore the responsiveness and precision of your vehicle's suspension with the Whiteline Sway Bar Mount Bushing Service Kit. Engineered specifically for 26mm sway bars, these bushings replace worn or compliant OE rubber components that lead to handling degradation and unwanted suspension noise. Using an advanced synthetic elastomer formulation, these bushings maintain their shape and performance under high loads while resisting the chemical breakdown often caused by oil, grease, and ozone.

• Precision fit for 26mm sway bars to ensure optimal clamping and reduced deflection.
• Advanced material formulation provides superior resistance to oil, grease, ozone, and harsh weathering.
• Integrated internal grease reservoirs provide continual self-lubrication for long-term friction management.
• Designed for a straightforward installation that minimizes the need for specialized shop tools.
• Includes detailed installation instructions to ensure proper fitment and performance.
• Manufacturer Part Number: KSK109-26

Fitment Table

Fits select 2009-2024 Toyota 4Runner and 2010-2023 Lexus GX460 models.

The Whiteline KLC248 Sway Bar Link Drop Kit is engineered to restore and optimize sway bar effectiveness, which is often hindered by worn mounts or improper geometry on modified vehicles. By correcting the link alignment, this kit eliminates sway bar preload during installation, ensuring maximum output from the sway bar for significantly improved grip and sharper handling response.

Built with durable, lightweight componentry, this kit is designed to withstand varied road conditions while distributing loads more effectively across the chassis. It helps reduce body roll for a more stable, confident cornering experience. This kit is essential for enthusiasts looking to maintain the mechanical advantage of their sway bar system.

• Eliminates sway bar preload for consistent handling performance
• Improves cornering stability and reduces body roll
• Distributes suspension loads more effectively
• Durable construction for long-term reliability
• Kit Includes: (4) Bushings, (2) Spacers, and (4) Bolts
• Manufacturer Part Number: KLC248

Fits select 2015-2026 Audi A3 and Volkswagen Golf, SportWagen, and GTI models. This Whiteline BWK018 kit is a complete handling solution designed to reduce body roll and improve chassis balance by replacing the undersized factory sway bars with larger-diameter, adjustable units.

The kit features a 24mm 2-point adjustable front sway bar and a 22mm 2-point adjustable rear sway bar. These bars allow drivers to fine-tune the vehicle's handling characteristics to reduce understeer and increase cornering grip. The included heavy-duty adjustable sway bar links eliminate the flex found in OE components and allow for on-car length adjustment up to 25mm to eliminate sway bar preload.

Constructed for longevity and maintenance-free operation, the kit includes Whiteline's synthetic elastomer bushings with a PTFE internal lining that eliminates the need for periodic lubrication. All metal components are finished with protective plating or powder coating to resist corrosion in harsh environments.

• Manufacturer Part Number: BWK018
• Front Sway Bar: 24mm (2-point adjustable)
• Rear Sway Bar: 22mm (2-point adjustable)
• Bushings: PTFE-lined synthetic elastomer (no grease required)
• Hardware: Heavy-duty adjustable links with steel ball joint ends
• Lateral Locks: Included DIY locks to prevent bar shifting
• Construction: Forged ends and high-quality alloy materials

Fits select 2007-2019 Toyota Yaris, Prius C, and Scion xD models. This Whiteline heavy-duty rear sway bar is engineered to reduce body roll and improve lateral grip by spreading cornering loads more evenly across all four tires. By increasing the roll stiffness of the rear suspension, this 22mm bar provides sharper turn-in response and better handling balance without compromising ride quality.

Constructed from high-quality solid spring steel, the BTR86Z features 2-point adjustability, allowing you to fine-tune the vehicle's handling characteristics to your driving style. The kit includes Whiteline's proprietary synthetic elastomer bushings, which are resistant to oil, grease, and ozone, ensuring long-term performance and quiet operation. To prevent the bar from shifting during aggressive cornering, DIY lateral locks are included to maintain alignment within the mounts.

• Part Number: BTR86Z
• Diameter: 22mm
• Adjustment: 2-Point adjustable for customizable roll stiffness
• Material: High-strength spring steel with protective powder coating
• Bushings: Grease-retention synthetic elastomer for maximum durability
• Includes: Rear sway bar, bushings, lateral locks, and installation hardware
• Design: Bolt-on installation to factory mounting points

Fits 2014-2017 Chevrolet SS Base.

The Whiteline BHR95 is a 27mm non-adjustable rear sway bar engineered to reduce body roll and improve the handling balance of your vehicle. By increasing the rear roll stiffness, this bar ensures that lateral loads are spread more evenly across the tires during cornering, resulting in increased grip and better steering response without significantly impacting ride comfort.

Built for long-term durability, the bar features forged ends for maximum strength at the link mounting points. The kit includes Whiteline’s specialized synthetic elastomer bushings, which utilize internal bore knurling and grease retention lips to maintain lubrication and prevent noise. All metal components are finished with protective plating and powder coating to resist corrosion and weathering in harsh undercar environments.

• Diameter: 27mm solid spring steel
• Adjustment: Non-adjustable (fixed position)
• Bushings: Synthetic elastomer with internal grease reservoirs
• Lateral Locks: Included DIY locks prevent sideways movement under load
• Finish: Protective powder coating over corrosion-resistant plating
• Installation: Bolts to factory mounting points
• Includes: 27mm sway bar, bushings, lateral locks, and molybdenum disulphide grease
• Part Number: BHR95

Fits 1994-2001 Acura Integra GS, GS-R, LS, RS, Special Edition, and Type R models.

The Whiteline 27mm heavy-duty front sway bar is engineered to reduce body roll and improve lateral grip by spreading cornering loads more evenly across the tire contact patches. Featuring a 2-point adjustable "Blade" design, this bar allows for precise tuning of your suspension's stiffness to match your driving style and track conditions without sacrificing ride quality or comfort. The kit utilizes a ball-joint and pin link type configuration for direct response and dependable fitment.

• Part Number: BHF53XZ
• Diameter: 27mm
• Adjustment: 2-Point Adjustable
• Type: Heavy-duty Blade style with ball-joint/pin links
• Kit includes: 1 sway bar, 2 links, 6 bushings, and 4 washers

Fits select 1973-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler models.

The Whiteline W93574 Transmission Mount Bushing kit is designed to replace worn or degraded factory mounts, effectively restoring drivetrain stability and alignment. By upgrading to these high-durability bushings, you reduce the risk of excessive transmission movement that can lead to vibration and driveline wear. Engineered for straightforward installation, this kit ensures a dependable fit for both classic CJ series and early Wrangler models.

• Replaces worn OE bushings to maintain proper transmission alignment
• Durable materials support long-term use and consistent drivetrain reliability
• Reduces unwanted movement for improved performance across all driving conditions
• Manufacturer Part Number: W93574

Kit Contains: 2 Bushings, Grease, and Installation Guide.

Fits select 1963-1982 Chevrolet Camaro, Chevelle, Corvette, El Camino, and Nova. This Whiteline W93473 complete mount set is engineered to replace worn original equipment mounts, restoring drivetrain alignment and improving power delivery by reducing excessive engine and transmission movement.

Constructed from a proprietary synthetic elastomer formulation, these mounts are specifically designed to resist the common failures of rubber, including degradation from oil, grease, ozone, and atmospheric weathering. The specially bonded design provides the optimized strength necessary for high-load applications, while internal grease reservoirs offer continual self-lubrication for long-term friction management.

• Complete kit includes engine and transmission mounts plus supporting corrosion-resistant hardware.
• Synthetic elastomer formulation provides superior longevity over standard rubber.
• Includes extreme pressure molybdenum disulphide (LM) based grease for extended service life.
• Designed for straightforward installation without the need for specialized shop tools.
• Manufacturer Part Number: W93473

Fits select 2006-2016 Volkswagen Golf, GTI, Golf R, Jetta, Rabbit, and R32 (1.8T / 2.0T).

Whiteline front sway bar mount bushings are engineered to improve suspension response and eliminate the excessive play common with aged factory rubber components. These bushings are manufactured from a high-grade synthetic elastomer formulation designed to resist oil, grease, ozone, and harsh weather conditions. A standout feature is the high-performance PTFE inner lining, which creates an exceptionally low coefficient of friction. This lining facilitates a "grease-free" operation by reducing the need for lubrication during installation. For maximum service life, these bushings include internal grease reservoirs and are supplied with molybdenum disulphide (LM) based grease.

• Manufacturer Part Number: W23618
• Inner Diameter: 23.6mm
• Material: Advanced Synthetic Elastomer
• Lining: PTFE inner lining for low friction
• Grease-free technology reduces maintenance
• Internal reservoirs for self-lubrication
• Resistant to ozone and weathering
• Includes molybdenum disulphide (LM) based grease

Fits 2003-2008 Mitsubishi Lancer Evolution, including GSR, MR, RS, and SE submodels.

Restore suspension precision and eliminate unwanted geometry changes with the Whiteline W0590 Rear Upper Control Arm bushing kit. Designed to replace the high-compliance factory rubber bushings at the inner front position of the rear upper arm, this kit utilizes Whiteline's advanced synthetic elastomer formulation. This material provides superior resistance to oil, grease, ozone, and extreme weather conditions while maintaining consistent alignment and predictable handling under heavy cornering loads.

• Direct replacement for worn OE bushings to improve suspension response and chassis feedback.
• Advanced synthetic elastomer formulation resists degradation from oil and environmental exposure.
• Protective plating on all metal components acts as a durable skin to resist corrosion in harsh conditions.
• Specifically engineered for the rear upper control arm (inner front position).
• Maintains critical alignment settings by reducing bushing deflection.
• Manufacturer Part Number: W0590

Fits select 2012-2026 Audi A3, S3, TT Quattro, and Volkswagen Golf, GTI, Golf R, Passat, Tiguan, and Arteon. Check fitment table for specific model and engine compatibility.

The Whiteline KCA476 offset strut mounts provide a technical solution for drivers seeking to optimize front-end geometry. These mounts feature an offset design that allows for precise adjustments of either caster or camber, depending on the orientation during installation. By refining these alignment settings, you can significantly improve turn-in response, steering feel, and overall cornering grip.

Constructed with low-compliance rubber, these mounts are engineered to maintain consistent suspension geometry under high loads while helping to isolate vibration for a controlled driving experience. The inclusion of a twin-shielded bearing design ensures long-term reliability and smooth operation throughout the suspension's travel.

• Provides adjustment for either caster or camber to suit specific driving requirements
• Low-compliance rubber construction reduces deflection for stable alignment settings
• Twin-shielded bearing design enhances durability and protects against contaminants
• Includes required installation hardware for a direct replacement of the factory strut top
• Manufacturer Part Number: KCA476

Fits 1992-2000 Lexus SC300/SC400 and 1993-1998 Toyota Supra (Base / Twin Turbo).

Engineered to reduce body roll and improve lateral grip, the Whiteline 30mm heavy-duty front sway bar is a fundamental upgrade for the JZA80 and Z30 chassis. By spreading cornering loads more evenly across all four tires, this bar increases stability and responsiveness during turn-in and high-speed lane changes without compromising ride quality. The 2-point adjustability allows drivers to fine-tune the handling balance to suit specific driving conditions or track setups.

Constructed from high-quality steel with a protective powder coating, this sway bar is built to resist corrosion in harsh environments. It features Whiteline’s advanced synthetic elastomer bushings, designed with internal bore knurling and grease retention lips for consistent lubrication and noise-free operation. The included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads, ensuring the geometry remains precise.

• Part Number: BTF67Z
• Diameter: 30mm
• Adjustment: 2-Point Adjustable
• Material: High-strength steel with protective plating and powder coating
• Bushing Type: Synthetic elastomer with oil and ozone resistance
• Includes: Sway bar, bushings, lateral locks, molybdenum disulphide grease, and installation guide