Fits 1993-2001 Subaru Impreza (Base, Brighton, L, LS, LX, Outback, and RS).

The Whiteline BSK004 sway bar kit is a comprehensive suspension solution engineered to reduce body roll, neutralize understeer, and increase mechanical grip. This matched set replaces the factory bars with heavier duty, adjustable units that allow for precise chassis tuning. The kit features a 22mm front bar with two adjustment points and a 22mm rear bar with three adjustment points, giving you the ability to dial in the car's balance for anything from daily driving to spirited track use.

Constructed from high-quality materials for consistent torsional stiffness, this kit includes everything needed for a complete installation, including heavy-duty end links and bushings. The adjustable nature of these bars makes it easy to compensate for other suspension modifications or specific tires.

• Manufacturer Part Number: BSK004
• Front Sway Bar: 22mm (2-point adjustable)
• Rear Sway Bar: 22mm (3-point adjustable)
• Kit Includes: 2 Sway Bars, 2 End Links, 4 Bushings, 8 Bolts, 14 Washers, 8 Nuts
• Reduces body roll and improves turn-in response

Fits 2004-2008 Acura TSX Base models.

The Whiteline 18mm 2-point adjustable rear sway bar is engineered to reduce body roll and sway during cornering. By increasing the vehicle's roll stiffness, this bar distributes lateral loads more evenly across the tires, maximizing the contact patch and improving overall cornering grip without compromising ride quality or comfort. The 2-point adjustability allows drivers to fine-tune the handling characteristics to suit specific driving conditions or personal preferences.

This sway bar kit features Whiteline's advanced synthetic elastomer bushings, designed to resist oil, grease, ozone, and weathering. The bushings incorporate internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation. The bar itself is finished in a durable protective powder coating to provide superior corrosion resistance over standard paint.

• Part Number: BHR80Z
• Diameter: 18mm
• Adjustment: 2-Point Adjustable
• Material: High-strength steel with synthetic elastomer bushings
• Finish: Protective powder coating
• Included: (1) Sway bar, (2) Bushings

Fits 1993-2002 Mitsubishi Mirage (DE, ES, LS, S).

Worn front control arm bushings significantly degrade vehicle stability, steering precision, and braking efficiency. The Whiteline Plus Front Lower Inner Rear Control Arm Bushing Kit (W52662) replaces soft or degraded OE bushings with advanced synthetic elastomer components. This kit is engineered to provide superior elasticity, memory, and durability across all driving conditions, from daily commuting to performance applications.

• Advanced Synthetic Elastomer: Formulated for resistance to oil, grease, ozone, and weathering to ensure a long service life.
• Internal Grease Reservoirs: Features a self-lubricating design for optimal friction management and silent operation.
• Corrosion Protection: Metal components feature a protective plating tougher than conventional paint for superior weather resistance.
• Installation Ready: Supplied with extreme pressure molybdenum disulphide (LM) based grease and a detailed install guide.
• High-Load Strength: Specially bonded design provides the optimized strength required in high load-bearing suspension points.
• Manufacturer Part Number: W52662

The Whiteline Grip Series Stage 1 Kit (GS1-SUB009) is a comprehensive entry-level suspension upgrade designed to improve handling precision and reduce body roll for the 2008-2014 Subaru Impreza and WRX. By combining tuned lowering springs with adjustable sway bars and heavy-duty end links, this kit provides a flatter cornering attitude and sharper turn-in response while maintaining daily driving comfort.

This kit features progressive-rate lowering springs that provide a 20mm drop front and rear, lowering the center of gravity for better stability. The 22mm adjustable sway bars allow for fine-tuning of the chassis balance, while the included heavy-duty end links eliminate the flex found in factory components. Each kit is supplied with synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent, quiet operation.

• Front Sway Bar: 22mm diameter, 2-point adjustable with forged ends.
• Rear Sway Bar: 22mm diameter, 3-point adjustable with forged ends.
• Front Springs: 6.1kg/mm (329lb/in) rate, approx. 20mm drop.
• Rear Springs: 5.8kg/mm (325lb/in) rate, approx. 20mm drop.
• Adjustable End Links: Heavy-duty steel ball joint ends with up to 25mm on-car length adjustment.
• Bushings: Oil and ozone resistant synthetic elastomer with internal grease reservoirs.
• Finish: Protective powder coating and anodized alloy for superior corrosion resistance.
• Included Hardware: DIY lateral locks, mounting accessories, and molybdenum disulphide (LM) grease.
• Manufacturer Part Number: GS1-SUB009

Fits 2015-2021 Subaru WRX and 2015-2017 WRX STI. The Whiteline Grip Series Stage 1 Kit is an engineered handling solution designed to reduce body roll, improve turn-in response, and provide a more aggressive stance without compromising daily ride quality. This comprehensive kit replaces soft factory components with performance-tuned alternatives, featuring progressive rate lowering springs and multi-point adjustable sway bars.

• Lowering Springs: Delivers a consistent 20mm drop front and rear with spring rates of 6.1kg/mm (329lb/in) front and 5.8kg/mm (325lb/in) rear.
• Adjustable Sway Bars: Includes a 26mm 2-point adjustable front bar and a 22mm 3-point adjustable rear bar for precise chassis tuning.
• Heavy-Duty End Links: Eliminates flex and allows for up to 25mm of on-car length adjustment to remove sway bar preload.
• Advanced Bushings: Synthetic elastomer mounts with internal bore knurling and grease reservoirs for quiet, maintenance-free operation.
• Durability: Metal components feature protective plating and powder coating to resist corrosion in harsh environments.

Each GS1-SUB008 kit includes DIY lateral locks to prevent sway bar shifting under cornering loads, extreme pressure molybdenum disulphide grease, and a detailed installation guide. These components are designed to work seamlessly with factory dampers while maintaining correct alignment geometry.

Fits 2022-2026 Subaru WRX (Base, GT, Limited, and Premium).

Engineered to “Activate More Grip,” the Whiteline 22mm 3-point adjustable rear sway bar is a vital upgrade for the VB chassis, designed to significantly reduce body roll and lateral sway. By increasing the rear roll stiffness, this bar spreads cornering loads more evenly across all four tires, resulting in increased grip and improved handling balance without compromising ride quality. The 3-point adjustability allows drivers to fine-tune the suspension response to suit specific driving styles or track conditions.

• Precision Tuning: 3-point adjustment holes allow for easy stiffness calibration to dial out understeer.
• Advanced Bushing Design: Features synthetic elastomer bushings with internal bore knurling and grease retention lips for optimum lubrication and silent operation.
• Lateral Locks: Included lateral locks prevent the sway bar from shifting sideways under heavy cornering loads.
• Durable Finish: Heavy-duty powder coating provides a tough skin that resists corrosion and weathering in harsh environments.
• Self-Lubricating: Internal grease reservoirs provide continual lubrication for long-term friction management.

Kit Specifications:

• Diameter: 22mm
• Adjustment: 3-Point
• Position: Rear
• Bushings: Synthetic Elastomer
• Grease: Molybdenum disulphide (LM) based
• MPN: BSR57Z
• Includes: 1 Sway Bar, 2 Bushings, Lateral Locks, and Installation Hardware

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models.

The Whiteline BSK017 Front and Rear Sway Bar Kit is a comprehensive handling solution engineered to reduce body roll, neutralize understeer, and sharpen steering response. By increasing the roll stiffness of the chassis, this kit ensures your tires maintain a more consistent contact patch during hard cornering, providing the "more grip" required for spirited driving and track applications. The kit features adjustable bars that allow you to fine-tune the handling balance to your specific driving style or tire setup.

• Front Sway Bar: 26mm 2-point adjustable.
• Rear Sway Bar: 22mm 3-point adjustable.
• Heavy-duty alloy end links with steel ball joints and up to 25mm of on-car length adjustment.
• Synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent lubrication.
• DIY lateral locks prevent sideways shifting of the sway bar under heavy cornering loads.
• Dual-layer protection with corrosion-resistant plating and a durable powder-coated finish.
• Includes internal grease reservoirs for reduced maintenance and friction management.
• Supplied with molybdenum disulphide (LM) grease and a detailed installation guide.
• Manufacturer Part Number: BSK017

Fits 2008-2014 Subaru Impreza WRX, including 2.5 GT, Limited, and Premium models.

The Whiteline BSK011 sway bar kit is a complete handling solution designed to reduce body roll and increase chassis rigidity. This kit features a 22mm 2-point adjustable front sway bar and a 22mm 3-point adjustable rear sway bar, allowing you to fine-tune your vehicle's oversteer and understeer characteristics. By replacing thin factory units with high-tensile adjustable bars, you achieve flatter cornering and more precise steering response during aggressive driving or lane changes.

The kit includes heavy-duty sway bar links with ball joint ends that allow for up to 25mm of on-car length adjustment to eliminate sway bar preload. The included bushings are manufactured from Whiteline's proprietary synthetic elastomer, featuring internal bore knurling and grease retention lips for consistent lubrication and silent operation. All metal components are finished with a combination of protective plating, E-coat, and powder coating for maximum corrosion resistance in harsh environments.

• Manufacturer Part Number: BSK011
• Front Sway Bar: 22mm (2-point adjustable)
• Rear Sway Bar: 22mm (3-point adjustable)
• Heavy-duty adjustable end links with 25mm range
• Forged ends for maximum strength at mounting points
• DIY lateral locks to prevent sway bar shifting
• Synthetic elastomer bushings with internal grease reservoirs
• Includes installation guide and molybdenum disulphide grease

Fits 1993-2000 Nissan Skyline R33 and R34 GT-S models.

The Whiteline BNK010 sway bar kit is an engineered handling solution designed to "Activate More Grip" by reducing body roll and improving the chassis balance of your vehicle. By minimizing lean during cornering, this kit ensures a more stable tire contact patch and sharper steering response, providing a more predictable and controlled driving experience.

This kit features a 24mm 4-point adjustable front sway bar paired with a 22mm 2-point adjustable rear sway bar. This adjustability allows drivers to fine-tune the suspension's roll stiffness to match specific driving styles or track conditions. Both bars are finished in a durable, protective powder coating that acts as a hard skin to resist corrosion and survive harsh undercar environments.

The included bushings utilize high-grade synthetic elastomer technology. Engineered with internal bore knurling and grease retention lips, these bushings maintain optimum lubrication for silent, low-friction operation. Internal grease reservoirs provide continual self-lubrication, ensuring long-term performance and friction management.

• Front Sway Bar: 24mm diameter, 4-point adjustable
• Rear Sway Bar: 22mm diameter, 2-point adjustable
• Bushings: Synthetic elastomer with internal grease reservoirs and bore knurling
• Hardware: Includes extreme pressure molybdenum disulphide (LM) grease
• Finish: Corrosion-resistant silver powder coating
• Manufacturer Part Number: BNK010

Fits select 2005-2016 Subaru Forester, Impreza, WRX, STI, and Legacy models.

The Whiteline Front Vehicle Essentials Kit (WEK080) is an engineered handling solution designed to eliminate steering slop and maximize front-end grip. By bundling critical bushing and geometry components, this kit addresses the inherent soft points in the factory Subaru suspension. It features the renowned front anti-lift and caster kit to improve dynamic alignment, along with a positive shift gearbox kit and precision steering rack bushings for direct tactile feedback.

Constructed using Whiteline's proprietary synthetic elastomer formulation, these bushings are resistant to oil, grease, ozone, and extreme weathering. The metal components feature protective plating and powder coating for superior corrosion resistance in harsh environments. Designed for high-load applications, the bushings include internal grease reservoirs for self-lubrication and consistent friction management.

• Replaces soft OE bushings with high-durometer synthetic elastomer for sharper response.
• Front anti-lift/caster kit improves turn-in and high-speed stability.
• Positive shift gearbox kit and steering rack bushings reduce drivetrain and steering rack deflection.
• Internal grease reservoirs ensure long-term, quiet operation.
• Protective plating on hardware withstands road salt and debris.
• Includes extreme pressure molybdenum disulphide (LM) grease and a detailed installation guide.
• Manufacturer Part Number: WEK080

Fits select 2005-2016 Subaru Forester, Impreza, WRX, STI, and Legacy models.

The Whiteline WEK079 Front Vehicle Essentials Kit is a comprehensive handling solution designed to optimize front-end geometry and steering response. By replacing compliant factory rubber with high-performance synthetic elastomer bushings, this kit provides a significant upgrade in grip and tactile feedback. The package targets critical points in the front suspension and drivetrain to deliver more precise steering and improved power delivery.

This kit includes Whiteline’s famous front anti-lift/caster kit, a positive shift gearbox kit for better gear engagement, and steering rack and control arm bushings to eliminate slop. Each component is engineered for durability, featuring internal grease reservoirs for self-lubrication and protective plating or powder coating to resist corrosion in demanding environments.

• Synthetic Elastomer Formulation: Resistant to oil, grease, ozone, and weathering for long-term performance.
• Anti-Lift/Caster Kit: Enhances front-end grip and turn-in by adjusting suspension geometry.
• Positive Shift Gearbox Kit: Reduces drivetrain movement for more consistent gear changes.
• High-Load Design: Specially bonded construction for strength in high-stress applications.
• Internal Lubrication: Built-in grease reservoirs provide continual lubrication to minimize friction.
• Included Hardware: Supplied with extreme pressure molybdenum disulphide (LM) based grease and a detailed installation guide.
• MPN: WEK079

Fits select 1987-2006 Jeep Cherokee, Comanche, and Wrangler models.

The Whiteline W93530 Engine Mount Set is engineered to provide superior drivetrain stability while resisting the harshest environmental conditions. Each component features a specialized protective plating that functions as a hard skin, providing significantly higher corrosion resistance than conventional paint. These mounts are built using Whiteline’s advanced formulation technology, ensuring the material remains resistant to oil, grease, ozone, and weathering over years of service.

• Internal grease reservoirs provide continual self-lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended component life.
• Protective plating on all metal components resists corrosion and environmental wear.
• Designed for straightforward installation using standard tools.
• Manufacturer Part Number: W93530

Fits 2005-2012 Nissan Pathfinder models including LE, S, SE, SE Off-Road, Silver Edition, SV, and XE.

The Whiteline W93451 differential mount bushing kit is designed to eliminate excessive drivetrain slop and maintain critical pinion angles. By replacing soft or worn factory units with high-performance synthetic elastomer bushings, this kit reduces initial torque loss and ensures more efficient power transfer to the wheels. This upgrade provides a more connected feel during gear shifts and under heavy acceleration.

Constructed using the latest material formulation technology, these bushings are engineered to withstand harsh undercar environments. The elastomer compound is resistant to oil, grease, ozone, and weathering for long-term durability and consistent performance.

• Maintains proper pinion alignment for improved power delivery
• Reduces drivetrain movement and torque loss
• Advanced synthetic elastomer construction
• Resistant to oil, grease, and ozone
• Manufacturer Part Number: W93451
• Includes: 2 Bushings

Fits 2005-2014 Ford Mustang models, including Base, GT, Boss 302, Bullitt, and Shelby GT500 variants. This adjustable panhard rod is essential for vehicles with modified ride heights to correctly re-center the rear axle.

The Whiteline Adjustable Panhard Rod (KPR068) is engineered to control lateral axle movement, preventing tires from rubbing and ensuring predictable handling. Constructed from heavy-duty DOM steel tubing with forged ends, this assembly provides the structural integrity needed for high-performance driving. It features Whiteline's proprietary Max-C synthetic elastomer bushings, which utilize grease-free technology for quiet, maintenance-free operation without the squeaks often associated with polyurethane.

• Precision Adjustment: Allows for fine-tuning of axle center after lowering or lifting the vehicle.
• Durable Construction: Manufactured from heavy-duty DOM steel tube for maximum rigidity.
• Max-C Bushings: Provides a grease-free, quiet, and maintenance-free solution for lateral stability.
• Corrosion Resistance: Finished with a protective powder coating to withstand harsh road conditions.
• Direct Replacement: Designed as a complete assembly that replaces the factory fixed-length rod.

Vehicle Fitment:

Fits select 1996-2024 Ford, Hyundai, Kia, Mercedes-Benz, Nissan, Suzuki, and Toyota models.

Whiteline heavy-duty adjustable sway bar links are engineered to eliminate sway bar preload, a critical step for vehicles with altered ride heights or aftermarket suspension components. By neutralizing preload, these links ensure the sway bar can deliver its maximum intended rate for immediate roll control, improved mechanical grip, and sharper turn-in response. Unlike fixed-length OE links that can bind or flex, these high-strength components use a turnbuckle-style adjustment to fine-tune the connection between the sway bar and the control arm or strut.

Built for durability in demanding environments, these links feature high-quality anodized alloy bodies and heavy-duty steel ball joint ends. The ball joints provide a wide range of angular rotation to accommodate complex suspension travel without binding. The on-car adjustment design allows for precise length changes of up to 25mm without requiring the removal of the link from the vehicle.

• Manufacturer Part Number: KLC180-255
• Adjustment Range: Up to 25mm (center-to-center)
• Construction: Anodized alloy bodies with heavy-duty steel ball joints
• Function: Eliminates sway bar preload to optimize handling and response
• Installation: On-car length adjustment with included hardware and guide

Fits 2008-2015 Mitsubishi Lancer Evolution models, including GSR, MR, MR Touring, SE, and Final Edition. This kit is engineered to replace the soft, compliant factory bushings that allow excessive rear differential movement under load, helping to eliminate drivetrain clunk and improve power delivery to the ground.

The Whiteline KDT963 kit features a specially bonded design optimized for high load-bearing applications. The advanced synthetic elastomer formulation is resistant to oil, grease, ozone, and weathering, ensuring long-term durability compared to standard rubber. To ensure consistent performance, the bushings include internal grease reservoirs for self-lubrication and articulation voids that allow for necessary compression under load.

• Corrosion Resistance: Protective plating on all metal components provides a hard skin tougher than conventional paint.
• Optimized Management: Internal grease reservoirs and articulation voids balance strength with necessary movement.
• Self-Lubricating: Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended service life.
• Installation: Includes a detailed installation guide; designed for fitment without specialized equipment.
• Manufacturer Part Number: KDT963

Fits select 1990-1997 Mazda Miata and 2004-2011 Mazda RX-8. This Whiteline BMK002 kit is a complete handling solution designed to reduce body roll, increase chassis rigidity, and improve steering response during high-speed cornering and lane changes.

This kit replaces restrictive factory bars with a 24mm 2-point adjustable front sway bar and a 16mm 3-point adjustable rear sway bar. By providing multiple mounting points, this setup allows for fine-tuned chassis balance to suit your driving style. The package includes high-strength adjustable end links that eliminate sway bar preload and allow for up to 25mm of on-car length adjustment. The heavy-duty ball joints rotate to any angle for stress-free fitment and maximum articulation.

Construction features include forged ends for maximum strength at the mounting points and DIY lateral locks to prevent the bars from shifting under heavy cornering loads. The included bushings are made from Whiteline's proprietary synthetic elastomer, featuring internal bore knurling and grease reservoirs for self-lubrication and resistance to oil, ozone, and weathering.

• Front Sway Bar: 24mm (2-point adjustable)
• Rear Sway Bar: 16mm (3-point adjustable)
• High-strength adjustable front and rear sway bar links
• Synthetic elastomer bushings with internal grease retention lips
• Protective powder coating and plating for superior corrosion resistance
• Heavy-duty steel ball joint ends
• Includes lateral locks and extreme pressure molybdenum disulphide (LM) grease
• Manufacturer Part Number: BMK002

Fits 1986-1999 Jeep Cherokee and 1987-1992 Jeep Comanche.

Whiteline W73819 bushings are a critical service upgrade for leaf-sprung Jeeps. Factory rubber bushings often perish under heavy loads, towing, or high mileage, leading to sloppy handling and poor axle alignment. These signature red synthetic elastomer bushings are engineered for maximum durability, offering high load-bearing capability and resistance to oil, grease, ozone, and weathering.

• Replaces worn OE spring eye and shackle bushings to restore suspension geometry.
• Internal grease reservoirs provide continual self-lubrication for smooth friction management.
• Protective plating on metal components offers a hard skin tougher than paint to resist corrosion in harsh off-road environments.
• Formulated for high tensile strength and abrasion resistance.
• Includes extreme pressure molybdenum disulphide (LM) based grease for extended service life.
• Manufacturer Part Number: W73819

Fits select 2001-2006 Acura RSX, Honda Civic, and Honda CR-V models.

Worn front control arm bushings significantly degrade vehicle stability, steering precision, and braking efficiency. The Whiteline Plus W53412 Front Lower Inner Rear Bushing Kit replaces factory units with advanced synthetic elastomer bushings designed to restore "as-new" handling while providing superior elasticity, memory, and durability for both daily driving and performance applications.

These bushings feature internal grease reservoirs for continuous self-lubrication, ensuring optimum friction management and a quiet ride. To protect against the elements, all metal components are treated with a protective plating and powder coating that outlasts conventional paint, resisting corrosion and weathering from oil, grease, and ozone.

• Manufacturer Part Number: W53412
• Material: Advanced synthetic elastomer for high durability and memory
• Finish: Protective plating and powder coating for superior corrosion resistance
• Self-Lubrication: Internal grease reservoirs for reduced friction
• Included Hardware: Extreme pressure molybdenum disulphide (LM) based grease and installation guide

Fits 2003-2008 Mitsubishi Lancer Evolution including GSR, MR, RS, and SE models.

Replace worn factory rubber mounts with the Whiteline Plus Rear Sway Bar Bushing Set to restore chassis precision and improve handling. These 22mm bushings are engineered from a high-grade synthetic elastomer that provides the durability of a solid mount with the compliance needed for street and track use. Unlike standard rubber, this material is resistant to oil, grease, ozone, and weathering, ensuring a long service life without degradation.

Designed for low-maintenance performance, the internal bore features knurling and grease retention lips. These reservoirs act as a self-lubrication system, managing friction and preventing the common squeaking associated with aftermarket bushings. Each set is supplied with extreme pressure molybdenum disulphide (LM) based grease for a quiet, smooth-acting suspension setup.

• Bushing Diameter: 22mm
• Material: High-durability synthetic elastomer
• Internal bore knurling for optimum grease retention
• Resistant to chemicals and environmental weathering
• Includes molybdenum disulphide (LM) grease
• Manufacturer Part Number: W22959

Fits select 1995-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner models. This Whiteline Plus steering rack and pinion mount bushing kit is engineered to restore steering precision and driver feedback that is often lost to worn or contaminated factory rubber bushings.

Modern steering systems face significant stress from wider wheels, lower-profile tires, and aggressive alignment settings. Additionally, engine bay contaminants like oil leaks can rapidly degrade OE rubber. This kit (W12978) utilizes Whiteline's advanced synthetic elastomer formulation, which is specifically designed to resist oil, grease, ozone, and weathering while providing a more stable mounting point for the steering rack.

• Improved Feedback: Reduces rack movement for sharper steering response.
• Durability: Synthetic elastomer formulation outlasts factory rubber and resists degradation from automotive fluids.
• Self-Lubricating: Internal grease reservoirs ensure continuous lubrication and reduced friction.
• Corrosion Protection: Metal components feature protective plating and powder coating to withstand harsh undercar environments.
• Complete Kit: Includes bushings and extreme pressure molybdenum disulphide (LM) grease for a long-lasting installation.

Fits select 2012-2026 Hyundai Elantra, Elantra N, Kona, Veloster, and Veloster N.

The Whiteline KDT973 pitch mount bushing is engineered to control the fore and aft twisting motion of the engine and drivetrain. Factory pitch stop mounts are typically constructed from high-compliance rubber intended for cabin comfort, which often results in significant movement under load. This low-compliance bushing replaces the soft OE unit to eliminate the slop and shudder found during aggressive shifting or throttle transitions.

By limiting engine pitch, this mount ensures faster and more responsive power delivery. It is constructed from premium anodized alloy materials for superior corrosion resistance and features Whiteline's signature synthetic elastomer for long-lasting performance under high torque demands. This is a critical upgrade for vehicles with increased power output where engine movement can compromise drivetrain efficiency.

• Replaces soft factory rubber bushings to eliminate drivetrain slop and shudder
• Constructed with premium anodized alloy for superior corrosion and wear resistance
• Low-compliance bushing technology provides a faster, more positive throttle response
• Engineered to handle high torque and power output demands
• Includes detailed installation guide for a straightforward bolt-on upgrade
• Manufacturer Part Number: KDT973

The Whiteline BWK004 Front and Rear Sway Bar Kit fits select 2004-2015 Audi A3, TT, and Volkswagen Eos, Golf, Jetta, and Rabbit models (1.8T / 2.0T). This engineered suspension solution is designed to reduce body roll, improve cornering grip, and enhance steering response by increasing the vehicle's lateral stiffness.

This kit features 24mm heavy-duty sway bars with multi-point adjustment: 3-point front and 2-point rear. These adjustment points allow drivers to fine-tune the handling balance to suit specific driving conditions or preferences. The bars are manufactured from high-quality alloy with forged ends for maximum strength at the link mounting points. To ensure long-term durability and corrosion resistance, all metal components feature a protective plating and powder-coated finish.

The package includes Whiteline’s synthetic elastomer bushings, which utilize internal bore knurling and grease retention lips for consistent lubrication. The included adjustable sway bar links eliminate preload and allow for up to 25mm of on-car length adjustment. DIY lateral locks are also provided to prevent sideways movement of the bar under heavy cornering loads.

• Part Number: BWK004
• Front Sway Bar: 24mm, 3-point adjustable
• Rear Sway Bar: 24mm, 2-point adjustable
• Bushings: Synthetic elastomer with PTFE lining for low friction
• Hardware: Heavy-duty ball joint end links and lateral locks included
• Finish: Powder-coated and anodized alloy for superior corrosion resistance

Fits 2000-2005 Toyota MR2 Spyder Base.

The Whiteline 22mm front adjustable sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires, significantly increasing cornering grip and improving the handling characteristics of the MR2 Spyder. This heavy-duty upgrade provides a more stable platform for performance driving without sacrificing ride quality or comfort.

This kit features a 2-point adjustment system, allowing you to fine-tune the vehicle's roll stiffness to suit your driving style or specific track conditions. To ensure long-lasting performance and quiet operation, the included mounts utilize Whiteline's synthetic elastomer formulation, which is resistant to oil, grease, ozone, and weathering. The bushings are designed with internal bore knurling and grease retention lips to maintain lubrication and manage friction.

• Part Number: BTF81Z
• Diameter: 22mm Heavy Duty Solid Spring Steel
• Adjustment: 2-Point multi-point adjustment
• Bushing Technology: Synthetic elastomer with internal grease reservoirs
• Hardware: DIY lateral locks to prevent sideways movement under load
• Finish: Corrosion-resistant protective powder coating
• Included: Sway bar, bushings, lateral locks, molybdenum disulphide (LM) grease, and install guide

Fits select 2008-2021 Subaru Forester, Impreza, WRX, STI, Legacy, Outback, and XV Crosstrek. This Whiteline BSR49XXZ rear sway bar is engineered to increase cornering grip and reduce body roll by spreading lateral loads more evenly across all four tires.

The 24mm heavy-duty blade features 3-point adjustability, allowing you to fine-tune your vehicle's handling characteristics for specific driving conditions or preferences. The bar is finished with a protective plating and powder coating for long-term corrosion resistance, while the forged ends provide maximum strength at the link mounting points. This kit includes DIY lateral locks to prevent sideways movement of the bar under high cornering loads.

• Diameter: 24mm
• Adjustment: 3-point adjustable
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips
• Hardware: Lateral locks and install guide included
• Installation: Direct bolt-on; estimated 1-hour install time
• Warranty: 3-year / 60,000-mile manufacturer warranty
• Manufacturer Part Number: BSR49XXZ

Fits select 2004-2013 Subaru Forester and 2008-2014 Subaru Impreza, WRX, and STI models.

Engineered to "Activate More Grip," this Whiteline heavy-duty front sway bar is designed to reduce body roll and stabilize the vehicle's chassis during cornering. By effectively distributing lateral loads across the tires, this 22mm sway bar increases cornering grip and improves overall handling precision without compromising ride quality. The 2-point adjustability allows drivers to fine-tune the stiffness to suit specific driving conditions or performance preferences.

Constructed with forged ends for maximum strength, the sway bar features a durable protective powder coating to resist corrosion and wear. The kit includes DIY lateral locks to prevent sideways movement under heavy cornering loads and high-performance synthetic elastomer bushings. These bushings utilize internal bore knurling and grease retention lips to ensure consistent lubrication and long-term durability against oil, ozone, and weathering.

• Diameter: 22mm
• Adjustment: 2-point multi-hole adjustment
• Construction: Heavy-duty steel with forged ends and silver powder coat finish
• Bushings: Synthetic elastomer with grease retention knurling
• Hardware: Includes DIY lateral locks and detailed installation guide
• Manufacturer Part Number: BSF39Z

Fits select 2001-2007 Subaru Impreza and 2005-2006 Saab 9-2X.

The Whiteline Rear Vehicle Essentials Kit (WEK078) is a hand-picked collection of bushings and alignment components designed to refresh your rear suspension and optimize vehicle geometry. By replacing soft or worn factory rubber with Whiteline’s advanced synthetic elastomer formulation, this kit eliminates excessive deflection and maintains consistent alignment settings even under high-load cornering.

Engineered for longevity and performance, these components feature internal grease reservoirs for continuous self-lubrication and are finished with protective plating or powder coating to resist corrosion. This kit is a comprehensive solution for drivers seeking improved chassis response and handling precision without sacrificing daily drivability.

• Synthetic elastomer formulation provides superior resistance to oil, grease, ozone, and weathering.
• Internal grease reservoirs facilitate optimal friction management and quiet operation.
• Protective plating and powder coating offer a durable barrier against corrosion.
• Bonded design optimized for high load-bearing suspension applications.
• Includes extreme pressure molybdenum disulphide (LM) based grease for extended service life.
• Complete with detailed installation instructions for a straightforward bolt-on upgrade.
• Manufacturer Part Number: WEK078

Fits select 2004-2007 Subaru Impreza (WRX, STI, RS, TS, 2.5i, Outback Sport) and Saab 9-2X models.

The Whiteline WEK077 Front Vehicle Essentials Kit is a curated set of suspension bushings and alignment components designed to restore steering precision and handling balance. This kit replaces worn factory rubber with Whiteline's advanced synthetic elastomer formulation, offering a significant upgrade in durability and chassis feedback. These components are engineered to withstand extreme conditions while maintaining consistent geometry.

• Synthetic Elastomer Formulation: Engineered to resist oil, grease, ozone, and environmental weathering for long-term performance.
• Internal Grease Reservoirs: Features integrated channels for self-lubrication, ensuring smooth operation and optimum friction management.
• Heavy-Duty Finish: Metal components are protected by a hard-skin plating and powder coating that resists corrosion and outlasts conventional paint.
• Assembly Lubricant: Includes extreme pressure molybdenum disulphide (LM) based grease to prevent squeaks and extend component life.
• Installation Ready: Kit includes a detailed instruction guide for a straightforward installation process.
• Manufacturer Part Number: WEK077

Vehicle Fitment

Fits select 2001-2007 Subaru Impreza (WRX, STI, RS, TS, Outback Sport) and 2005-2006 Saab 9-2X models.

The Whiteline Plus W92835 Rear Differential Mount In Cradle is engineered to stabilize the rear drivetrain by replacing soft factory bushings with a high-performance synthetic elastomer. This specially bonded design is optimized for high load-bearing applications, reducing differential movement to improve power delivery and throttle response while maintaining durability for street and track use.

• Advanced synthetic elastomer formulation resists oil, grease, ozone, and weathering for a longer service life than rubber.
• Bonded design provides the necessary strength for high-torque applications.
• Protective plating on all metal components offers a corrosion-resistant barrier that outperforms standard paint.
• Includes internal sleeves designed to bolt directly into the factory rear cradle.
• Manufacturer Part Number: W92835

Fits 1973-1980 Chevrolet C10 and GMC C15/C1500 pickups across all submodels including Cheyenne, Silverado, and Sierra Classic.

The Whiteline Body Mount Bushing Set replaces worn-out factory rubber mounts that have compressed or perished over decades of service. These high-quality elastomer bushings are engineered to restore proper body-to-chassis alignment, providing consistent stability and handling performance. By replacing degraded OE components, this kit significantly reduces the noise and vibration transferred into the cabin for a smoother, quieter ride.

• Restores factory body alignment and chassis stability
• Engineered for superior durability and resistance to environmental wear
• Effective reduction of NVH (Noise, Vibration, and Harshness)
• Manufacturer Part Number: W93498

Kit Contains: 12 Bushings, 6 Tubes, 12 Washers, and Assembly Grease.