The DV8 Offroad LBUN-01 Bull Bar Add-On is engineered specifically for the MTO Series Front Bumpers on the 2021 Ford Bronco. This bolt-on accessory provides enhanced front-end protection for your grille and winch while serving as a dedicated mounting platform for auxiliary off-road lighting.

Constructed from high-grade steel, this bull bar is finished in a durable 2-stage micro-texture powder coat designed to withstand trail debris and resist corrosion. It is purpose-built to accommodate the DV8 Offroad 13-inch Elite Series Light Bar, allowing you to integrate high-output lighting without the need for custom fabrication or drilling.

• Direct bolt-on compatibility with DV8 Offroad MTO Series Front Bumpers
• Constructed from heavy-duty high-grade steel
• Durable 2-stage micro-texture black powder coat finish
• Integrated mounting points for 13-inch Elite Series Light Bar
• Manufacturer Part Number: LBUN-01

Fitment: Fits 2021 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks, and Wildtrak).

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition models.

Protect your front-end from trail debris and light brush with the DV8 Offroad Front Brush Guard. Engineered as a direct bolt-on for the 2024-2026 Toyota Land Cruiser, this guard (MPN: LBTF4-02) provides an extra layer of defense without interfering with your factory recovery points or bumper. It is specifically designed to maintain full functionality of all factory sensors and safety components, ensuring your vehicle's systems operate exactly as intended.

• Manufactured for direct bolt-on installation using factory hardware.
• Retains use of original recovery points and factory sensor systems.
• Mounting points for universal 2-inch tube light brackets to enhance trail visibility.
• Micro-texture black powder coat finish for long-term durability and corrosion resistance.
• Engineered for an easy DIY installation with no cutting or drilling required.

Fits 2021-2026 Ford Bronco models equipped with the factory OEM Capable front bumper. This includes Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe Edition, and Wildtrak trims.

The DV8 Offroad LBBR-09 Capable Bull Bar provides essential front-end protection and versatile lighting configurations for the Ford Bronco. Engineered to bolt directly to the OEM Capable front bumper, this bull bar sits in front of the grille to guard against brush, branches, and debris while maintaining a sleek, factory-integrated appearance. The 3mm and 3.5mm steel plate construction ensures durability on technical trails, while the micro-texture black powder coat finish provides superior corrosion resistance.

• Flexible Lighting Options: Mount a 13-inch to 20-inch single or dual-row light bar above or below the bar, or install three 3-inch pod lights using the adjustable and removable light tabs.
• Rugged Construction: Manufactured from heavy-duty 3mm and 3.5mm steel plate for reliable impact protection.
• Premium Finish: Micro-texture black powder coat designed to match the factory bumper and trim components.
• Easy Installation: Specifically designed for the OEM Capable bumper for a precise, secure fit.
• Manufacturer Part Number: LBBR-09

Fits 2021-2026 Ford Bronco.

Upgrading to an aftermarket off-road bumper often leaves the factory crash bars exposed, resulting in an unfinished look at the front of your rig. The DV8 Offroad LBBR-07 Crash Bar Caps provide a clean, professional solution by capping the open ends of the steel bars while adding functional mounting points for auxiliary lighting or equipment.

Constructed from durable steel and finished in a micro-texture black powder coat, these caps are built to withstand trail debris and harsh environments. The integrated accessory mounts are designed to host up to 3-inch light pods, rock lights, RGB accent lighting, or action cameras. Designed for a straightforward bolt-on installation, these caps maintain clearance for tire sizes up to 35 inches.

• Replaces unsightly open crash bar ends with a finished steel cap
• Integrated mounting point for lights or action cameras
• Supports up to 3-inch light pods or standard rock lights
• Durable micro-texture black powder coat finish
• Simple bolt-on installation to factory points
• Engineered for clearance with up to 35-inch tires
• Manufacturer Part Number: LBBR-07

Fits 2021-2026 Ford Bronco models equipped with the factory modular steel front bumper.

The DV8 Offroad LBBR-04 bull bar provides rugged grille protection and a streamlined mounting solution for auxiliary lighting. Designed specifically for the OEM modular steel bumper, this bar sits lower than the factory version to maintain a low-profile stance while shielding your front end from light obstacles. It features an integrated mounting point for a 13-inch single-row LED light bar, allowing for a clean, recessed lighting setup.

This bull bar is a direct bolt-on upgrade that utilizes factory accessory mounting locations and original hardware for a straightforward installation with no drilling required.

• Fits a 13-inch single-row LED light bar
• Low-profile design for improved grille visibility
• Direct bolt-on to factory accessory mount locations
• Utilizes OEM hardware for installation
• Manufacturer Part Number: LBBR-04

Fits select 2018-2025 Jeep Wrangler (JK and JL) and 2020-2025 Jeep Gladiator models.

Enhance your Jeep's off-road presence and trail visibility with the DV8 Offroad LED Grille Marker Lights. This kit features three high-powered amber LEDs mounted to a single, precision-engineered bracket that positions the lights with uniform spacing within your grille openings. Designed for both form and function, these lights improve vehicle recognition when navigating through dust, snow, or heavy rain.

To ensure long-term durability on the trail, these lights are designed to be slightly recessed. This positioning protects the LED units from flying debris and the elements without sacrificing their wide-angle visibility. The kit provides a clean, integrated look that adds a rugged aesthetic to your Jeep's front end while serving as a functional safety upgrade.

• High-Powered LEDs: Includes three high-output amber LEDs for maximum visibility.
• Custom Mounting Bracket: Single-piece bracket ensures perfect light spacing and a secure fit.
• Recessed Protection: Lights are set back to shield them from trail debris and weather damage.
• Rugged Aesthetics: Adds a distinct off-road look to the factory grille.
• Manufacturer Part Number: GRJL-02

Fits select 2018-2025 Jeep Wrangler JL and Gladiator JT models.

The DV8 Offroad GRJL-01 Replacement Grille provides an aggressive, "angry eye" transformation for your Jeep's front end. Designed specifically to complement the larger 9-inch headlights found on the JL and Gladiator platforms, this grille replaces the factory plastic unit with a more menacing profile. The design features a pronounced brow that gives your vehicle a custom off-road aesthetic without compromising headlight output.

Constructed for a precise fit, the GRJL-01 is easy to paint, allowing for a perfect color match to your vehicle's body or a high-contrast accent. Installation is straightforward and requires no permanent modifications, as it utilizes the factory grille mounting points and hardware for a secure, rattle-free fit.

• Direct replacement for the OEM front grille
• Aggressive "angry eye" brow design for a custom look
• Compatible with factory 9-inch headlights
• Paintable finish for custom color-matching
• Uses factory mounting locations for an easy, bolt-on installation
• Manufacturer Part Number: GRJL-01

Fits 2022-2026 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

The DV8 Offroad Centric Series Front Bumper provides a high-clearance, low-profile solution for the third-generation Tundra. Engineered to complement factory body lines, this center-mount bumper installs without the need for fender modifications. It features a hidden winch mount located beneath the grille for a clean aesthetic while maintaining functionality for recovery. The design ensures full compatibility with factory adaptive cruise control, parking sensors, and all OE skid plates.

• Hidden winch mount with access point located just beneath the grille
• Inset mounting point for a single-row 20-inch LED light bar
• Dual mounting points for 3-inch light pods (can serve as secondary winch access when pods are not installed)
• 1-inch thick D-ring mounts designed for 3/4-inch shackle pins
• Internal welded tabs for secure and organized wire management
• Compatible with factory parking sensors and adaptive cruise control
• Retains use of all factory skid plates
• Low-profile design requires no cutting or alteration of factory fenders
• Manufacturer Part Number: FBTT2-05

Fits all 2022-2026 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone.

The DV8 Offroad MTO (Made to Overland) Series Front Bumper is engineered for 2022-2026 Toyota Tundra owners who require a high-clearance profile for technical terrain without sacrificing modern vehicle technology. This bumper features a slim, high-clearance design that significantly improves approach angles. It is fully compatible with factory TRD and non-TRD skid plates, and is specifically designed to retain the full functionality of the Adaptive Cruise Control (ACC) module and parking sensors.

Constructed for durability and utility, the MTO Series includes steel plating to shield the lower intercooler from trail debris. For recovery and lighting, the bumper houses a hidden winch mount and mounting points for a 20-inch light bar and two 3-inch light pods. Integrated internal zip-tie tabs provide a clean solution for routing wiring harnesses away from moving parts. The bumper is finished with paintable aluminum accent panels, allowing for a custom color-matched look.

• Manufacturer Part Number: FBTT2-04
• Compatible with factory skid plates (including TRD models)
• Retains Adaptive Cruise Control (ACC) and factory parking sensors
• Mounting points for (1) 20-inch light bar and (2) 3-inch light pods
• Integrated hidden winch mount
• Steel intercooler protection plating
• Internal zip-tie tabs for clean wire management
• Paintable aluminum accent panels

Fits 2024-2026 Toyota Tacoma models including Limited, SR, SR5, Trailhunter, and TRD Series. This heavy-duty front bumper is engineered to provide superior front-end protection while maintaining full compatibility with factory technology suites.

The DV8 Centric Series bumper is constructed from a combination of 3mm, 3.5mm, and 5mm plate steel for a robust shield against trail obstacles. It is finished in a durable micro-texture black powder coat to resist corrosion and abrasions. Designed for the modern Tacoma, it retains full functionality of OEM parking sensors, cameras, fog lights, and adaptive cruise control (ACC) systems. For recovery and lighting, it features an integrated winch mount, two 1-inch thick D-ring mounts, and mounting points for both a 20-inch single-row light bar and two 3-inch pod lights.

• Manufacturer Part Number: FBTT1-08
• Material: 3mm, 3.5mm, and 5mm plate steel construction
• Finish: Micro-texture black powder coat
• Recovery: Integrated winch mount and (2) 1" thick D-ring mounts for 7/8" pins
• Lighting Compatibility: Mounts for (1) 20" single-row light bar and (2) 3" pod lights
• Tech Compatibility: Retains OEM sensors, fog lights, cameras, and Adaptive Cruise Control
• Wire Management: Welded-in zip tie tabs for clean aftermarket wiring
• Installation: Minimal cutting required for fitment

The DV8 Offroad Centric Series Front Bumper (FBTT1-06) provides a low-profile, heavy-duty recovery solution for 2016-2023 Toyota Tacoma models. Designed to complement factory styling, this center-mount bumper eliminates the need to cut into side fenders, requiring only minimal trimming for installation. The hidden winch mount is positioned securely behind the integrated bumper skid plate and is compatible with various winch sizes.

For recovery and lighting, the Centric Series features 1-inch thick D-ring shackle mounts and dedicated mounting points for a 20-inch single-row LED light bar and two 3-inch LED light pods. Finished in a micro-texture black powder coat, this bumper offers superior corrosion resistance while maintaining a clean, OE-plus appearance.

• Fits 2016-2023 Toyota Tacoma Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport.
• Manufacturer Part Number: FBTT1-06
• Integrated hidden winch mount fits multiple winch sizes
• Reinforced 1-inch thick D-ring shackle mounts for recovery
• Mounts for (1) 20-inch single-row LED bar and (2) 3-inch LED pods
• Micro-texture black powder coat finish for durability
• Minimal cutting required for installation; retains factory side fenders

Fits 2016-2023 Toyota Tacoma models including Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport.

The DV8 Offroad FBTT1-05 Center Mount Bumper provides a rugged winch-capable platform without the hassle of cutting factory plastic bodywork. Engineered for a direct bolt-on installation, this bumper is ideal for owners who want to add recovery capability and front-end protection while maintaining a clean, factory-integrated aesthetic. The heavy-duty winch mount is rated to support up to 12,500 lbs., providing confidence in difficult recovery scenarios.

• Manufactured from 3mm and 5mm steel for high-impact durability
• Finished in a micro-texture black powder coat for long-term corrosion resistance
• Includes a bolt-on bull bar with an integrated mount for a 20-inch light bar
• Integrated heavy-duty winch mount supports up to 12,500 lbs. capacity
• Features two 1-inch thick D-ring mounts for secure recovery points
• Designed to retain OEM fog lights and Adaptive Cruise Control (ACC) functionality
• Welded-in zip tie tabs for organized light and winch wiring
• Part Number: FBTT1-05

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition models.

The DV8 Offroad Spec Series Front Bumper (FBTL4-02) is a high-clearance, low-profile armor solution designed to enhance the utility of the 2024-2026 Toyota Land Cruiser. This bumper features a hidden winch mount and 1-inch thick D-ring recovery points to handle recovery tasks, while an integrated skid plate provides protection reaching back to the front cross member. Engineered for modern technology, it retains factory parking sensors and adaptive cruise control (ACC) functionality.

• Accepts multiple winch sizes up to 20.9” x 6.3” x 10” (L x W x H)
• Central mounting point for a 20” light bar and two side pods for 3” lights
• Four top-mounted elongated slots for hidden light mounting behind the factory grille mesh
• Durable micro-texture black powder coat with a satin black accent panel
• Welded zip-tie tabs for professional wire management
• 1-inch thick D-ring mounts for secure recovery
• Straightforward bolt-on installation with no drilling required

Fits all 2024-2026 Toyota Land Cruiser trim levels, including the 1958, Base, and First Edition models.

The DV8 Offroad Centric Front Bumper (FBTL4-01) is a center-mount recovery solution designed to enhance the off-road capability of your Land Cruiser without sacrificing modern convenience. This bumper is engineered to retain critical factory features, including the OEM front camera, parking sensors, adaptive cruise control (ACC), fog lights, and the factory skid plate. Its low-profile design provides a clean, integrated look while significantly improving front-end protection.

Constructed from a combination of 3mm, 3.5mm, and 5mm steel, the bumper is finished in a durable micro-texture black powder coat for long-term corrosion resistance. For recovery, it features an integrated winch mount and two 1-inch thick D-ring mounts. Lighting options are expanded via a mount for a single 20-inch single-row light bar. Installation requires cutting of the factory bumper, and welded-in zip tie tabs are included for clean wire management.

• Manufacturer Part Number: FBTL4-01
• Material: 3mm/3.5mm/5mm Steel Construction
• Finish: Micro-Texture Black Powder Coat
• Retains OEM Camera, Parking Sensors, and Adaptive Cruise Control
• Compatible with OEM Fog Lights and Factory Skid Plate
• Integrated Winch Mount and (2) 1-inch Thick D-Ring Mounts
• (1) 20-inch Single Row Light Bar Mount
• Includes Welded-In Zip Tie Tabs for Cable Management

Fits 2025-2026 Toyota 4Runner models, including SR5, TRD Sport, TRD Off-Road, Limited, Platinum, Trailhunter, and TRD Pro.

The DV8 Offroad Centric Series Front Winch Bumper (FBTF3-03) provides heavy-duty front-end protection and recovery capability while maintaining the factory styling of your 5th Gen 4Runner. Constructed from rugged steel and finished in a durable micro-texture black powder coat, this center-mount bumper is designed to accommodate a recovery winch and integrated lighting without replacing the entire front fascia.

• Recovery Ready: Features an internal winch mount that accepts most standard winches and two 1-inch thick D-ring mounts compatible with 7/8-inch pins.
• Integrated Lighting: Pre-drilled mounts for a 20-inch single-row light bar and two 3-inch light pods; retains factory fog lights in their original locations.
• Factory Retention: Engineered to maintain full functionality of factory parking sensors for uncompromised safety features.
• Clean Installation: Includes welded-in zip-tie tabs for professional wire management. Note: Minor cutting of the factory bumper is required for installation.

Technical Specifications:
- Material: Heavy-duty steel
- Finish: Micro-texture black powder coat
- MPN: FBTF3-03
- Compatibility: Not compatible with factory skid plate

Fits 2014-2024 Toyota 4Runner (SR5, Limited, TRD Off-Road, TRD Pro, TRD Sport, Trail, Venture, and Nightshade).

The DV8 Offroad Centric Series Winch Front Bumper (FBTF3-02) provides a robust recovery solution for the Toyota 4Runner while maintaining a streamlined, mid-width profile that complements factory body lines. Designed for versatility, it features a hidden winch mount capable of accommodating various winch sizes and integrates two 1-inch thick D-ring mounts for secure recovery points. The bumper is engineered to retain factory fog lights and styling while adding essential off-road functionality.

Lighting capabilities include a recessed mount for a 20-inch single-row LED light bar and two additional 3-inch pod light mounts. Please note that installing pod lights will restrict manual access to the winch; therefore, a winch with a wireless remote is required when pods are installed. The bumper is finished in a durable micro-texture black powder coat and features welded zip-tie tabs for organized wire management.

• Manufacturer Part Number: FBTF3-02
• Mid-width center mount design retains factory styling
• Hidden winch mount for multiple size winches
• Mounting provision for a 20-inch single-row LED light bar
• Dual 3-inch pod light mounts (requires wireless winch remote)
• Two 1-inch thick D-ring mounts
• Micro-texture black powder coat finish
• Does not interfere with factory fog lights
• Welded zip-tie tabs for clean wire management

The DV8 Offroad OE Plus Front Bumper (FBJL-13) is designed for 2018-2026 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT owners who want to maintain factory styling while significantly upgrading off-road utility. Engineered from a combination of 3mm and 5mm steel, this bumper features a modular design with removable wings, allowing you to switch between a full-width setup for maximum protection and a stubby configuration for increased tire clearance.

• Modular Versatility: Removable steel wings allow for full-width or stubby width configurations.
• Winch-Ready: Features a recessed winch mount to keep your recovery gear low for better airflow; includes a winch plate cover for when a winch is not installed.
• Lighting Compatibility: Integrated mounts for (2) 3-inch pod lights or DV8’s JL/JT-specific 4-inch LED fog lights. Compatible with DV8’s Elite Series Light Bar Mount and 13-inch LED Light Bar.
• Durable Construction: Fabricated from 3mm and 5mm steel and finished in a micro-texture black powder coat for superior corrosion resistance.
• Recovery Points: Designed to retain and work with factory Jeep tow hooks (if equipped).
• Includes: Removable steel bull bar and winch plate cover.

Note: This bumper is not compatible with the factory front skid plate. Minor trimming may be required for installation. The bull bar and winch may obstruct the front camera on equipped models.

Fits select 2007-2025 Jeep Wrangler JK and JL models, including Unlimited, Rubicon, Sahara, Sport, and 4xe.

The DV8 Offroad MTO Series Full-Width Winch Front Bumper (FBJL-12) is engineered for maximum front-end protection and trail utility. Its aggressive, flared-wing design aligns seamlessly with factory JK fenders as well as JL Rubicon and Non-Rubicon flares. A recessed winch tray keeps your recovery gear protected behind a sturdy tubular bull bar, while two 1-inch thick D-ring mounts—designed for 7/8-inch shackle pins—provide robust recovery points for technical recoveries.

This bumper offers versatile lighting options to keep the trail visible. It includes a mount for a 20-inch single-row light bar (compatible with DV8 Elite, Baja Designs S8, or Rigid SR series) tucked behind paintable aluminum accent panels. Additionally, each wing features a mount for a 3-inch LED light pod to improve peripheral lighting.

• Full-Width Coverage: Provides maximum protection for the grille and fenders.
• Winch Ready: Recessed tray accepts multiple winch sizes and includes a support bracket that doubles as a light bar mount.
• Heavy-Duty Recovery: Dual 1-inch thick D-ring mounts for 7/8-inch pins.
• Lighting Versatility: Central 20-inch light bar mount and dual 3-inch pod mounts.
• Durable Finish: Micro-texture black powder coat for long-lasting corrosion resistance.
• Easy Installation: Fully bolt-on design that works flawlessly with the SPJL-02 skid plate.
• Manufacturer Part Number: FBJL-12

Fits 2007-2025 Jeep Wrangler (JK/JL).

The DV8 Offroad FS-1 Series Stubby Front Bumper (FBJL-11) is engineered for off-road enthusiasts who prioritize aggressive approach angles and reliable recovery options. This high-clearance design minimizes front-end overhang, allowing your tires to contact obstacles more effectively. Built for durability, the bumper features a gusseted tubular bull bar and a recessed winch tray that protects your recovery gear while maintaining optimal airflow to the radiator.

• Recovery Capability: Includes a recessed winch tray that accepts multiple winch sizes and features a bolt-on fairlead mount. Two 1-inch thick D-ring mounts are integrated for 7/8-inch shackle pins.
• Integrated Lighting: Features a center inset light mount compatible with 20-inch dual-row light bars from DV8 Elite, Baja Designs, and Rigid.
• Heavy-Duty Finish: Coated in a micro-texture black powder finish for maximum resistance against trail debris and corrosion.
• Bolt-On Installation: Engineered as a direct bolt-on upgrade; fully compatible with the SPJL-02 skid plate.

• Manufacturer Part Number: FBJL-11
• Style: Stubby High-Clearance
• Material: Steel with micro-texture black powder coat
• Light Mount: 20" Dual Row
• D-Ring Mounts: 1" thick for 7/8" pins

Fits 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT (All trims including Rubicon, Mojave, and 4xe).

The DV8 Offroad Spec Series front bumper is engineered for aggressive rock crawling and technical trail use. This high-clearance bumper features a modular design with a removable winch plate capable of mounting most full-sized recovery winches, including the Warn 12s EVO. For protection against brush and light debris, the bumper includes a low-profile bull bar that also serves as a versatile lighting mount.

Built for durability and utility, the FBJL-09 is finished in a micro-texture black powder coat with a satin black mesh accent plate. The design prioritizes clean installation with welded-in zip tie tabs for organized wire management of your aftermarket lighting and winch accessories.

• Lighting Compatibility: Accepts (1) 20-inch light bar, (1) 15-inch light bar (mounted to bull bar), and (2) round lights (compatible with Baja Designs LP4 or Rigid 360 series).
• Winch Mounting: Removable center winch plate for full-size winch integration.
• Construction: High-clearance steel design for improved approach angles.
• Finish: Micro-texture black powder coat with satin black mesh accents.
• Wire Management: Integrated welded tabs for secure zip tie routing.
• MPN: FBJL-09

Fits select 2007-2025 Jeep Wrangler models including JK, JL, 4xe, and Rubicon trims.

The DV8 Offroad FS-7 Mid-Width Winch Front Bumper (FBJL-07) is a technical recovery solution designed for rock crawling and challenging terrain. This evolution of the classic FS-7 design features a recessed winch tray that lowers the center of gravity and maintains a sleek profile while optimizing airflow to the grille. The integrated bull bar provides critical protection for your winch and front-end components. Engineered for maximum clearance, this bumper facilitates aggressive approach angles for off-road performance.

• Recessed winch tray for lower profile and protected winch placement
• Integrated bull bar provides front-end and winch protection
• Dual 1-inch thick D-ring mounts compatible with 7/8-inch shackle pins
• Center mounting point for a 20-inch dual-row LED light bar
• Integrated mounts for two 3-inch pod lights on the bumper wings
• High-clearance design optimized for rock crawling and technical trails
• Welded-in zip tie tabs for clean and secure wire management
• Compatible with factory or aftermarket fenders (Rubicon and non-Rubicon)
• Works with the optional DV8 Offroad SPJL-02 skid plate
• Manufacturer Part Number: FBJL-07

Fits select 2007-2025 Jeep Wrangler JK and JL models, including Rubicon, Sahara, Sport, and 4xe trims.

The DV8 Offroad FS-15 Series Stubby Front Bumper is an evolution of a legacy design, re-engineered for reduced weight without compromising the structural integrity required for serious recovery. Featuring a high-clearance profile, this bumper provides aggressive approach angles for technical off-road trails. The integrated winch plate is designed to accommodate multiple winch sizes, including most 12,000 lb capacities.

Built for durability and utility, the FS-15 includes 1-inch thick D-ring mounts compatible with 3/4-inch shackles (7/8-inch pins). For protection, a heavy-duty bull bar shields your grille and winch from trail debris. This bumper also maintains factory functionality with mounting points for standard 4-bolt style 4-inch fog lights and additional tabs on the bull bar for dual pod lights or a 13-inch Elite Series Light Bar.

• High-Clearance Design: Stubby width optimized for maximum tire clearance and approach angles.
• Winch Ready: Integrated mount fits most winches up to 12,000 lbs.
• Heavy-Duty Recovery: Includes two 1-inch thick D-ring mounts.
• Lighting Options: Compatible with factory 4-inch fog lights; bull bar fits 13-inch light bars or pod lights.
• Installation: Direct bolt-on for 2018-2025 models; 2007-2018 models require trimming or removal of the factory plastic trim cover.
• Accessories: Compatible with DV8 Offroad SPJL-02 front skid plate.
• MPN: FBJL-05

Fits 2003-2009 Lexus GX470 Base models.

The DV8 Offroad MTO (Made To Overland) Series Winch Front Bumper is engineered to provide superior front-end protection and recovery versatility for the GX 470. This bumper features a 3-piece construction designed for high-clearance off-roading. The integrated winch mount sits securely within the bumper frame and is accessible through two top openings for easy operation. For recovery, the front face includes two heavily reinforced clevis mounts sized for 3/4-inch D-rings.

Built for durability, the MTO Series uses 4mm steel for the body and 5mm steel for critical mounts and supports, all protected by a 2-stage micro-texture black powder coat. Customization is built-in with paintable 3.5mm aluminum mesh accent plates and extensive lighting provisions. You can mount a 20-inch dual-row LED light bar behind the center mesh, 3-inch LED pods in the wings, and an additional 13-inch single-row light bar on the optional bull bar.

• 4mm steel body construction with 5mm internal mounts and supports
• Internal winch mount with dual top-access ports
• Dual reinforced recovery points for 3/4-inch D-rings
• Multiple lighting mounts: center 20-inch bar, wing pods, and optional bull bar mount
• 3.5mm perforated aluminum mesh panels (removable and paintable)
• Durable 2-stage micro-texture black powder coat finish
• Manufacturer Part Number: FBGX-02

Fits 2019-2021 GMC Sierra 1500 AT4, Base, Denali, Elevation, SLE, and SLT models.

The DV8 Offroad Spec Series Front Bumper (FBGC1-02) is engineered for the 2019-2021 GMC Sierra 1500 owner who demands maximum trail protection without sacrificing modern technology. Constructed from a robust combination of 3.5mm and 5mm steel, this bumper is designed to improve ground clearance while providing a secure mounting point for recovery gear. The assembly is finished in a durable micro-texture black powder coat with satin black mesh accent panels for a rugged, high-clearance aesthetic.

Unlike many aftermarket options, the Spec Series retains your factory adaptive cruise control (ACC), front camera, and parking sensors. It features a standard heavy-duty hidden winch mount and an included steel front skid plate to protect vital front-end components. For electrical upgrades, welded-in zip tie tabs ensure clean wire management for the integrated light mounts.

• Manufacturer Part Number: FBGC1-02
• Material: 3.5mm and 5mm heavy-duty steel
• Finish: Micro-texture black powder coat with satin black mesh inserts
• Recovery: (2) 1-inch thick D-ring mounts and hidden winch mount
• Lighting: (1) 20-inch dual or single row light bar mount and (2) 3-inch pod light mounts
• Technology: Retains OEM front camera, ACC, and parking sensors
• Included: Steel front skid plate and welded-in zip tie tabs

Fits select 2017-2021 Ford F-150, F-250 Super Duty, and F-350 Super Duty.

The DV8 Offroad FBFF2-03 Modular Winch Front Bumper is engineered to provide heavy-duty protection and utility without the excessive weight of traditional steel bumpers. Constructed from 3/16-inch steel with 1/4-inch internal reinforcements, this bumper utilizes strategic cutouts and removable aluminum mesh grills to maximize strength while minimizing mass. The innovative three-piece modular design allows for easier installation and the flexibility to swap end pieces for different styles, such as Baja or high-clearance plates, or to replace a single section if damaged.

This bumper is built for recovery and lighting performance, featuring an integrated winch mount capable of accommodating up to a 16,000 lbs. winch and two shackle recovery points. Visibility is enhanced via three integrated light mounting locations designed for two LED pods and one 6-inch light bar. The sand texture black powder coat finish offers excellent durability as-is or can be sanded and painted to color-match your vehicle.

• 3/16" steel construction with 1/4" reinforcements for high-impact durability
• Modular 3-piece design allows for end-piece customization and easier repair
• Integrated winch mount accommodates up to 16,000 lbs. capacity
• Two reinforced shackle recovery points
• Cutouts for two LED pod lights (DV8 p/n B3CE16W4W) and one 6-inch light bar
• Removable aluminum mesh inserts for weight reduction and color-matching
• Corrosion-resistant sand texture black powder coat finish
• Manufacturer Part Number: FBFF2-03

Note: LED lights are not included.

Fits select 2010-2018 Dodge and Ram 2500/3500 (5.7L / 6.7L).

The DV8 Offroad FBDR2-02 Front Bumper is engineered for heavy-duty recovery and front-end protection. Constructed from 3/16-inch high-tensile strength steel and reinforced with 1/4-inch steel in critical stress areas, this bumper is designed to accommodate winches with up to a 12,500 lbs. rating. To ensure long-term durability, each bumper undergoes a two-stage powder coating process: first, a proprietary corrosion-resistant base layer is applied, followed by a UV- and scratch-resistant textured black topcoat.

This bumper includes integrated lighting and maintains the functionality of your factory safety systems. The included economical relocation bracket allows for the continued use of OEM Adaptive Cruise Control by mounting securely inside the grill.

• Manufacturer Part Number: FBDR2-02
• Material: 3/16" and 1/4" High-Tensile Steel
• Finish: 2-Stage Textured Black Powder Coat
• Winch Compatibility: Up to 12,500 lbs.
• Includes integrated lighting
• Includes Adaptive Cruise Control (ACC) relocation bracket
• Mounts to factory locations
• DV8 Offroad No-Hassle Warranty

Fits 2023-2025 Chevrolet Colorado ZR2.

The DV8 Offroad Spec Series Front Bumper (FBCS3-02) is a high-clearance, winch-ready solution engineered specifically for the third-generation Colorado ZR2. This bumper features a "high and tight" wing design to maximize approach angles and obstacle clearance on technical trails. The integrated full front skid plate provides essential underbody protection, while the micro-texture black powder coat and satin powder-coated Spec Series mesh offer a durable, corrosion-resistant finish.

Built for utility and lighting versatility, the FBCS3-02 accepts multiple winch sizes and includes mounting provisions for a pair of 3-inch pod lights and a 20-inch light bar positioned behind the mesh panel. For recovery and maintenance, it features welded D-ring mounts and integrated zip tie tabs for clean wire management. This bumper is designed for ZR2 trim levels and retains factory functionality while improving off-road capability.

• High-clearance design with integrated full front skid plate
• Accepts multiple winch sizes for recovery versatility
• Mounting provisions for (2) 3-inch pod lights and (1) 20-inch light bar
• Welded-in zip tie tabs for streamlined electrical wiring
• Reinforced D-ring mounts for secure recovery points
• Micro-texture black powder coat with aluminum-backed logo
• Note: Compatible only with ZR2 trim; will not fit with crossmember-style lift kits

Fits 2022-2025 Chevrolet Silverado 1500 (Custom, High Country, LT, LTZ, RST, WT, and ZR2).

The DV8 Offroad Spec Series Front Bumper (FBCS1-08) is engineered for Silverado owners who demand a low-profile, high-clearance solution for off-road recovery. This bumper features an integrated winch mount, providing a secure foundation for self-recovery or assisting others on the trail. For additional recovery points, it includes a pair of 1-inch thick D-ring mounts designed to accept standard 3/4-inch shackles.

Constructed for durability and a tight fit, this Spec Series bumper requires minor cutting of the factory components for a proper installation. Please note that this design is not compatible with factory fog lights or roller-style fairleads. While the fitment includes the full model range, manufacturer testing indicates this specific bumper is not compatible with the ZR2 trim level package.

• Manufacturer Part Number: FBCS1-08
• Recovery: Integrated winch mount and dual 1-inch thick D-ring mounts
• Installation: Minor cutting of factory plastics required
• Compatibility: Not compatible with roller fairleads or factory fog lights
• Finish: Durable textured black powder coat

Fits 2019-2021 Chevrolet Silverado 1500 models including Custom, High Country, LT, LTZ, RST, SSV, WT, and Trail Boss.

The DV8 Offroad SPEC Series Front Bumper (FBCS1-07) is engineered to provide aggressive off-road styling and improved approach angles without the need for vehicle modifications. This bumper features a fully bolt-on installation, requiring no cutting or drilling to mount. Built for recovery, it includes 1-inch thick D-ring mounts and a hidden winch mount tucked behind the front fascia. For integrated lighting, the center section behind the satin black mesh panel is designed for 20-inch single-row light bars, while each wing accommodates dual 3-inch light pods.

• Micro-texture black powder coat finish with satin black accent panel
• Hidden winch mount and heavy-duty 1-inch thick D-ring recovery points
• Retains full functionality of factory OEM parking sensors via precision cutouts
• Center light mount fits DV8 Elite 20, Rigid SR 20, or Baja Designs S8 20-inch bars
• Wing mounts for (2) dual 3-inch light pods for supplemental lighting
• Internal welded zip-tie tabs for clean, secure wire management
• Direct bolt-on installation replaces factory bumper assembly
• Manufacturer Part Number: FBCS1-07

Fits 2021-2026 Ford Bronco all models including Raptor, Badlands, Wildtrak, and Everglades.

The DV8 Offroad Spec Series Winch Front Bumper (FBBR-05) is engineered for technical rock crawling and high-clearance off-roading. Featuring a slim, low-profile design, this bumper maximizes approach angles while providing robust front-end protection. The integrated winch mount is designed to fit a wide range of recovery winches, and the included heavy-duty steel skid plate directly replaces the factory unit to shield critical components from trail obstacles.

• Retains factory parking sensor functionality with integrated mounting points.
• Features dual 1-inch thick D-ring mounts for 3/4-inch shackles.
• Tubular bull bar offers grille protection and includes a mount for 10 to 13-inch single-row light bars.
• Center satin black accent plate provides mounting for a 20-inch single-row light bar.
• Each bumper wing accepts two 3-inch light pods for maximum peripheral visibility.
• Light fitment compatible with DV8 Elite 13/20, Baja Designs S8 10/20, and Rigid SR 10/20 series.
• Welded-in zip tie tabs included for organized electrical wire management.
• Direct bolt-on installation with no permanent vehicle modifications required.