Fits 2014-2019 Toyota Tundra models including 1794 Edition, Limited, Platinum, SR, SR5, and TRD Pro.

The ARB Summit Bumper (MPN 3415020KB) represents a modern evolution of the classic ARB Deluxe bar, engineered to provide heavy-duty frontal protection while complementing the contemporary styling of the Toyota Tundra. Built on ARB’s proven airbag-compatible mounting architecture, this system ensures that vehicle safety features remain functional while providing a rugged platform for recovery and lighting. The design features a 30mm edge radius on the wings and center pan, alongside massive 60.3mm top tubing for maximum structural integrity.

Functionality is central to the Summit Series. This bumper is compatible with most electric low-mount winches up to a 12,000 lb capacity and includes twin Hi-Lift jacking points for off-road recovery. Provisions for driving lights are integrated, along with redesigned fog light surrounds to accommodate optional lighting upgrades.

• Heavy-duty 60.3mm outer tubing for increased frontal protection
• Airbag-compatible mounting system engineered for factory safety compliance
• Compatible with low-mount electric winches up to 12,000 lbs
• Twin Hi-Lift jacking points and integrated driving light mounts
• Wider press-formed cover straps and two-piece polyethylene buffers
• Durable 30mm edge radius on wings and center pan
• Manufacturer Part Number: 3415020KB
• Note: Hawse fairlead spacer kit (3500600) required for hawse fairlead applications
• Note: LED fog light kit (3500910) and harness (3500520) sold separately

Fits 2014-2019 Toyota Tundra models including 1794 Edition, Limited, Platinum, SR, SR5, and TRD Pro.

The ARB Summit Bull Bar (3415020K) provides heavy-duty frontal protection for the 2014-2019 Toyota Tundra, evolving the legendary ARB Deluxe Bumper into a modern, contemporary design. Built on ARB’s proven airbag-compatible mounting architecture, this bumper ensures structural integrity while maintaining factory safety standards. The kit features a durable textured black finish and the Summit-specific 60.3mm top tubing for increased coverage.

Engineered for off-road utility, the Summit bumper is compatible with most low-mount electric winches up to a 12,000 lb capacity. It includes twin Hi-Lift jacking points and provisions for both driving lights and ARB’s redesigned fog light surrounds. Please note that a vehicle-specific installation fit kit is required but not included with this bumper kit.

• Manufacturer Part Number: 3415020K
• Fits 2014-2019 Toyota Tundra (Select Submodels)
• Heavy-duty 60.3mm top tubing and 30mm edge radius on wings/center pan
• Airbag-compatible mounting system for safety compliance
• Winch-ready design supports most low-mount winches up to 12,000 lbs
• Twin Hi-Lift jacking points and provisions for driving lights
• Durable two-piece polyethylene buffers
• Requires Hawse fairlead spacer kit (3500600) for Hawse fairlead applications
• Compatible with optional LED fog light kit (3500910) and harness (3500520)

Fits select 2007-2013 Toyota Tundra and 2007-2010 Toyota Sequoia (Base, Limited, Platinum, and SR5).

The ARB Deluxe Winch Bar (3415010) is a fully engineered replacement for the factory bumper, designed to provide superior protection and off-road functionality for remote area travel. This bumper features a multi-fold upswept and tapered wing design to improve approach angles and includes extensive under-protection panels for critical components. Constructed from durable steel with a black powder coat finish, it incorporates urethane buffers and heavy-grade wall tubing for maximum impact resistance.

• Compatible with most electric low-mount winches up to 16,500 lb capacity
• Twin Hi-Lift jacking points and OEM tow points
• Split pan design for maximum strength and airflow
• Provisions for ARB fog lights and IPF driving lights
• Finished in a durable black powder coat
• Requires Hawse fairlead spacer kit (part 3500600) if using a hawse fairlead
• Note: Does not fit Rock Warrior Edition; 2010+ models with Millennium or Limited grills may require modification

Fits 1986-1995 Toyota 4Runner and 1986-1994 Toyota Pickup models.

The ARB Deluxe Winch Bar is a fully engineered front protection system designed to replace the factory bumper on IFS-equipped Toyota Pickups and 4Runners. Unlike universal brush guards, ARB bumpers utilize a vehicle-specific mounting system that provides maximum structural integrity and winch load distribution. The multi-fold upswept and tapered wing design improves approach angles and ground clearance for demanding off-road terrain.

This bumper is constructed from durable steel with a black powder coat finish for corrosion resistance. It features dual Hi-Lift jacking points and a split-pan design to facilitate airflow to the radiator. The bar is compatible with most electric low-mount winches up to 10,000 lb capacity and includes provisions for driving lights and OEM tow points.

• Durable steel construction with 2.50-inch heavy-grade wall tubing
• Multi-fold upswept and tapered wing design for off-road clearance
• Compatible with low-mount winches up to 10,000 lb
• Twin Hi-Lift jacking points and urethane buffers
• Provision for driving lights and optional fog light kits
• Black powder coat finish
• Manufacturer Part Number: 3414070

Note: Fog light installation requires ARB loom part 3500440 (halogen) or 3500520 (LED). Compatible fog light kits include part 6821201 (halogen) or 3500890 (LED).

Fits 2003-2007 Toyota Land Cruiser Base (IFS models).

Unlike standard brush guards, the ARB Deluxe Bumper is a fully engineered protection system that completely replaces the factory bumper assembly. Designed specifically for remote area travel and off-road recovery, this bumper features a multi-fold upswept and tapered wing design for improved approach angles and a split pan design to maximize strength and airflow to the radiator.

Constructed from durable steel with a textured black powder coat finish, this bumper is winch-ready and compatible with most electric low-mount winches up to a 12,000 lb capacity. It includes integrated twin Hi-Lift jacking points and extensive under-protection panels to shield vital drivetrain components from trail debris. For added safety and durability, the unit is finished with urethane buffers and provides secure mounting for optional fog light kits.

• Manufacturer Part Number: 3413190B
• Durable steel construction with black powder coat finish
• Compatible with low-mount winches up to 12,000 lbs
• Twin Hi-Lift jacking points and under-protection panels
• Split pan design for optimal strength and cooling
• Requires loom for fog light kits 3500440 (halogen) or 3500520 (LED) unless using factory fogs
• Hawse fairlead spacer kit (3500600) required for hawse fairlead fitment

Fits 2002-2007 Toyota Land Cruiser Base models with Independent Front Suspension (IFS).

The ARB Deluxe Winch Bar is a fully engineered front protection system that replaces the factory bumper to provide superior structural integrity and off-road functionality. Constructed from durable steel with a multi-fold upswept and tapered wing design, this bar optimizes approach angles and provides extensive under-protection for critical components. The split-pan design ensures maximum airflow to the radiator while maintaining the strength required for remote area travel.

• Compatible with most electric low-mount winches up to 12,000 lb capacity.
• Features twin Hi-Lift jacking points and durable urethane buffers.
• Constructed with 250 heavy-grade wall tubing for maximum impact resistance.
• Finished in a durable black powder coat for long-lasting corrosion resistance.
• Mounting points provided for optional ARB fog light kits (3500890 LED or 6821201 Halogen).

Note: Fit kit is NOT included with this assembly. For hawse fairlead installations, spacer kit part 3500600 is required. Standard wiring loom part 3500440 or 3500520 is necessary if not using factory fog light connections. Manufacturer Part Number: 3413190.

Fits 1998-2001 Toyota Land Cruiser Base models.

The ARB Deluxe Bumper is a fully engineered mounting system designed to completely replace the factory bumper on your Land Cruiser. Built for the rigors of remote area travel, this bumper features a multi-fold upswept and tapered wing design to improve approach angles and strength. The signature split pan design ensures maximum airflow to the radiator while reinforcing the outer structure.

Fabricated from durable steel with a black powder coat finish, this bumper integrates twin Hi-Lift jacking points and urethane buffers for added utility and protection. It is designed specifically for IFS (Independent Front Suspension) models and provides extensive under-protection panels for vital front-end components.

• Manufacturer Part Number: 3413050B
• Compatible with most electric low-mount winches up to 12,000 lb capacity
• Durable steel construction with a black powder coat finish
• Includes twin Hi-Lift jacking points and urethane buffers
• Note: Hawse fairlead spacer kit (part 3500600) required when fitting a hawse fairlead
• Specifically for use with IFS models

Fits 1998-2002 Toyota Land Cruiser Base (IFS models).

The ARB Deluxe Combination Bar is a fully engineered front protection system that completely replaces the factory bumper. Designed specifically for the 100 Series Land Cruiser with Independent Front Suspension (IFS), this bumper provides a secure platform for mounting recovery gear and accessories while significantly increasing the vehicle's approach angle and structural protection.

Constructed from durable steel with a multi-fold upswept and tapered wing design, this bumper is finished in a resilient black powder coat. It features a split-pan design to facilitate airflow to the radiator and includes twin Hi-Lift jacking points for emergency recovery. Please note that the vehicle-specific fitting kit is required for installation and is sold separately.

• Compatible with most electric low-mount winches up to 12,000 lb capacity
• Durable steel construction with heavy-grade wall tubing
• Multi-fold wing design provides optimum strength and approach angle
• Integrated urethane buffers for added protection and aesthetics
• Twin Hi-Lift jacking points and extensive under-protection panels
• Manufacturer Part Number: 3413050
• Note: Hawse fairlead spacer kit (part 3500600) required when fitting a hawse fairlead

Fits 1990-1997 Toyota Land Cruiser and Lexus LX450 wide-flare models. The ARB Deluxe Winch Bar (MPN: 3411050) is an engineered mounting system designed to completely replace the factory bumper, providing superior protection and functionality for remote area travel. Constructed from durable steel with 250 heavy-grade wall tubing, this bumper features a multi-fold upswept and tapered wing design for improved approach angles and structural integrity.

This bar is winch-compatible and suits most low-mount electric winches with a capacity up to 12,000 lbs. The split-pan design facilitates maximum airflow to the radiator, while the durable black powder coat finish and urethane buffers provide a clean, long-lasting aesthetic. Note: This specific model is not airbag compatible and utilizes OEM tow points for recovery.

• Fits wide-flare 80 Series Land Cruisers and LX450 models
• Durable steel construction with black powder coat finish
• Integrated twin Hi-Lift jacking points
• Provisions for ARB fog lights and auxiliary driving lights
• Extensive under-protection panels for critical components
• Winch compatible up to 12,000 lb capacity
• Requires hawse fairlead spacer kit (3500600) for hawse applications

Fits 1980-1989 Toyota Land Cruiser Base.

The ARB Deluxe Bumper and Fitting Kit Bundle (3410100B) is a complete frontal protection system designed for remote travel and off-road durability. Unlike standard brush guards, this bumper replaces the factory unit entirely, utilizing a vehicle-specific mounting system engineered for maximum structural integrity. The signature multi-fold upswept and tapered wing design provides increased approach angles, while the split pan design facilitates optimal airflow to the radiator and increases front-end rigidity.

• Durable steel construction with a corrosion-resistant black powder coat finish.
• Integrated twin Hi-Lift jacking points for emergency recovery.
• Built-in provisions for mounting driving lights.
• Includes extensive under-protection panels to shield critical chassis components.
• Impact-resistant urethane buffers for added durability.
• Engineered mounting system ensures full vehicle integration and safety.

Fits 1980-1989 Toyota Land Cruiser (Base).

The ARB Deluxe Winch Bar provides a fully engineered mounting system that completely replaces the factory bumper for superior front-end protection. Designed specifically for the rigors of remote travel, this winch bar features a multi-fold upswept and tapered wing design to maximize structural integrity and improve approach angles. The split pan design facilitates optimal airflow to the engine while maintaining high-strength protection for the chassis and body.

• Durable steel construction with a corrosion-resistant black powder coat finish
• Fabricated with 250 heavy grade wall tubing for maximum impact resistance
• Integrated twin Hi-Lift jacking points and durable urethane buffers
• Extensive under-protection panels shield vital components from trail debris
• Pre-drilled provisions for mounting auxiliary driving lights
• Engineered mounting system ensures proper vehicle integration
• Manufacturer Part Number: 3410100

Note: A vehicle-specific fit kit is required for installation and is not included with this bumper.

Fits 1990-1997 Toyota Land Cruiser and Lexus LX450 Base models.

The ARB Deluxe Bull Bar (MPN 3211050) provides a fully engineered protection system that replaces the factory bumper assembly. Constructed from durable steel with a black powder coat finish, this bumper is designed for remote area travel, featuring a multi-fold upswept and tapered wing design to improve approach angles and ground clearance. The split-pan design increases structural integrity while ensuring optimal airflow to the engine's cooling system.

This bull bar incorporates twin Hi-Lift jacking points and maintains factory tow points for recovery operations. Please note that this specific model is non-airbag compatible and is not designed for winch mounting.

• Durable steel construction with a corrosion-resistant black powder coat
• Multi-fold upswept and tapered wing design for off-road clearance
• Split-pan design for maximum strength and radiator airflow
• Extensive under-protection panels shield vital components
• Twin Hi-Lift jacking points and integrated urethane buffers
• Provisions for ARB fog light installation
• Retains OEM tow points
• Manufacturer Part Number: 3211050

Fits 2009-2021 Nissan GT-R (Base, Black Edition, Nismo, Premium, Pure, Track Edition, and 50th Anniversary Edition).

Maintain the structural integrity and aesthetic alignment of your R35 with the AMS Performance Front Bumper Repair Kit. Designed as a direct-fit solution for common bumper mounting issues, this kit ensures your front fascia remains secure and properly gapped, whether you are on the street or the track. Developed by the engineering team at AMS Performance—a leader in high-performance Nissan GT-R development—this kit (MPN: ALP.07.06.0002-1) provides a robust alternative to costly full bumper replacements or makeshift repairs.

• Engineered specifically for the Nissan GT-R R35 chassis
• Addresses common bumper mounting point wear and tear
• Developed using documented R&D for precise fitment
• Compatible with all major GT-R trim levels from 2009 to 2021
• Manufacturer Part Number: ALP.07.06.0002-1

The DV8 Offroad Elite Series D-Ring Shackles are engineered for heavy-duty vehicle recovery, offering an 8-ton working load limit (WLL) and a breaking strength exceeding 72,000 lbs. These shackles are forged from 1-1/16" thick steel to provide maximum durability during high-tension pulls. A key feature of the Elite Series is the 7/8" chromoly flush-mount pin, which sits level with the shackle body for a snag-free profile and a clean aesthetic. The pin is designed to be tightened or removed using a standard 3/8" ratchet or chuck.

To ensure a quiet ride on the trail or highway, each pair includes eight polyurethane isolators in two different thicknesses (1/8" and 3/16"). These allow you to fine-tune the fitment to your specific bumper mounts, effectively eliminating rattling and vibration. The shackles are finished in a heavy-duty red powder coat for superior corrosion resistance and visibility in off-road environments.

• 8-ton working load limit (WLL)
• 72,000lb+ breaking strength
• 1-1/16" thick forged steel construction
• 7/8" chromoly steel flush-design pin
• Fits industry-standard D-ring mounts
• Includes (4) 1/8" and (4) 3/16" anti-rattle isolators
• Requires 3/8" ratchet for pin installation and removal
• Sold as a pair
• Manufacturer Part Number: UNSK-01RD

Engineered for high-stress recovery, the DV8 Offroad Elite Series D-Ring Shackles (UNSK-01GR) provide a high-strength connection point for off-road use. These shackles are forged from 1-1/16-inch thick steel, delivering a massive 72,000 lb breaking strength and a certified 8-ton working load limit (WLL). This makes them an essential upgrade for heavy-duty recovery on the trail.

The 7/8-inch chromoly pin features a flush-mount design that sits even with the shackle body. This low-profile aesthetic also improves security, as the pin is recessed and requires a 3/8-inch ratchet or chuck to tighten or loosen. To prevent the common issue of metal-on-metal rattling during daily driving, each kit includes two sets of isolators in 1/8-inch and 3/16-inch thicknesses to ensure a snug fit against your bumper or shackle tabs.

• Forged 1-1/16" thick steel construction with heavy-duty gray powder coat
• High-strength 7/8" chromoly pin with flush-mount security design
• 8-ton working load limit (WLL) and 72,000+ lb breaking strength
• Designed for use with a standard 3/8" ratchet or drive tool
• Includes (4) 1/8" and (4) 3/16" anti-rattle isolators
• Manufacturer Part Number: UNSK-01GR

The DV8 Offroad Elite Series D-Ring Shackles (UNSK-01BL) are engineered for heavy-duty vehicle recovery, providing a secure connection point for the most demanding trail extractions. Forged from 1-1/16 inch thick steel, these shackles are rated for an 8-ton Working Load Limit (WLL) and a breaking strength exceeding 72,000 lbs. The heavy-duty black powder coat finish provides long-term corrosion resistance for external mounting.

These shackles feature a 7/8-inch chromoly pin designed to fit industry-standard D-ring mounts. Unlike traditional shackles, the Elite Series utilizes a flush pin design that sits level with the shackle body for a cleaner look and improved clearance. Installation and removal are handled via a standard 3/8-inch ratchet or chuck. To eliminate annoying trail chatter, each pair includes eight isolators in two different thicknesses (1/8-inch and 3/16-inch) to ensure a snug, rattle-free fit against your bumper.

• Working Load Limit (WLL): 8 Tons
• Breaking Strength: 72,000 lbs+
• Material: 1-1/16" thick forged steel body
• Hardware: 7/8" chromoly steel flush-mount pin
• Tool Requirement: 3/8" ratchet or chuck
• Finish: Heavy-duty black powder coat
• Included Accessories: (4) 1/8" isolators and (4) 3/16" isolators
• Manufacturer Part Number: UNSK-01BL

Fits 2007-2018 Jeep Wrangler JK models equipped with a Dana 44 rear differential. The DV8 Offroad SPJK-13 Dana 44 Rear Differential Skid Plate provides essential armor for your Jeep's drivetrain by shielding the rear diff housing and pinion from direct rock impacts. This protection prevents the differential cover from being pulled back or 'peeled' during heavy scraping, which helps avoid oil leaks and trail-side failures.

• Protects rear differential housing and pinion from off-road impacts and hang-ups
• Seven-point mounting system for maximum durability and a secure fit
• Prevents differential oil leaks by shielding the cover edge from rock pressure
• Finished in a durable micro-texture black powder coat for corrosion resistance
• Includes a removable, paintable aluminum logo plate for customization
• Simple bolt-on installation using factory mounting locations
• Manufacturer Part Number: SPJK-13
• Fitment Note: Compatible with factory differential covers only; will not fit aftermarket covers.

Fits all 2007-2018 Jeep Wrangler JK and JK Unlimited models.

Protect your vulnerable suspension mounting points with the DV8 Offroad Rear Shock & Link Skid Plates. The factory rear axle brackets are notoriously thin and sit at the lowest point of the axle, making them susceptible to damage from rocks and trail obstacles. These skid plates provide a reinforced, smooth surface that allows your Jeep to slide over terrain rather than hanging up on the mounting hardware.

Constructed as a single-piece unit, these skids reinforce both the shock and the lower control arm link mounts simultaneously. The 100% bolt-on design ensures a straightforward installation without the need for welding or cutting. Finished in a micro-texture black powder coat, they offer superior corrosion resistance and a clean look that matches most aftermarket suspension components.

• Protects lower control arm links and shock mounts from rock impacts
• Reinforces thin OE brackets with a heavy-duty single-piece design
• Engineered to slide over obstacles to prevent trail hangups
• Durable micro-texture black powder coat finish
• Compatible with most aftermarket shocks, lift kits, Johnny Joints, and Heim connections
• Note: Not compatible with piggyback shocks featuring fixed lower reservoirs
• Manufacturer Part Number: SPJK-04

Fits all 2022-2026 Toyota Tundra models (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

The DV8 Offroad MTO (Made To Offroad) Series Rear Bumper provides a slim, mid-width profile that improves clearance while offering robust protection for your truck. This bumper is designed for a seamless bolt-on installation and fully retains the functionality of your factory backup sensors, blind spot monitoring (BSM) system, and license plate lighting. It also features dedicated inset mounting points to accommodate the OEM reverse lights.

For additional utility, the bumper includes two mounting points for 3-inch light pods tucked behind paintable aluminum mesh accent panels. Recovery options are provided by two welded 3/4-inch D-ring mounts. To simplify the install, DV8 includes welded-in zip tie tabs for clean wire management and optional grip tape for improved footing on the bumper surface when wet or muddy.

• Manufacturer Part Number: RBTT2-04
• Mid-width, sleek design with bolt-on installation (no cutting required)
• Compatible with factory blind spot monitoring (BSM) and backup sensors
• Accommodates (2) 3-inch light pods behind protective mesh
• Includes (2) 3/4-inch D-ring recovery mounts
• Paintable aluminum mesh inserts for custom color-matching
• Requires factory receiver hitch for installation

Fits 2007-2013 Toyota Tundra Base, Limited, Platinum, and SR5 models.

The DV8 Offroad RBTT2-02 rear bumper provides heavy-duty protection and recovery capability for the 2007-2013 Toyota Tundra. Built from 3/16-inch high tensile strength steel and reinforced with 1/4-inch steel in critical areas, this bumper is designed for rigorous off-road use. The internal winch mount accommodates winches up to 12,500 lbs, while the integrated side step cutouts provide easier access to the truck bed.

To ensure long-term durability, DV8 uses a specialized two-step powder coating process. The steel is first treated with a proprietary corrosion-resistant base layer before receiving a textured black, UV-resistant, and scratch-resistant top coat. This bumper is designed to retain the factory hitch receiver and includes two 3-inch round LED lights for improved visibility.

• Material: 3/16" steel body with 1/4" steel reinforcements
• Winch Capacity: Up to 12,500 lbs
• Finish: Two-step textured black powdercoat (UV and scratch resistant)
• Lighting: Includes (2) 3" round LED lights
• Hardware: Includes D-rings
• Access: Integrated side step cutouts
• Compatibility: Retains factory hitch receiver
• Manufacturer Part Number: RBTT2-02

Fits 2016-2023 Toyota Tacoma (Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport).

The DV8 Offroad MTO Series Rear Bumper is engineered as a heavy-duty, direct-fit replacement for the factory bumper, requiring no cutting or drilling for installation. It increases utility and protection with integrated side steps located at both the corners and the center of the bumper for easier bed access. For recovery situations, the bumper includes two reinforced clevis mounts designed to accept 3/4-inch D-rings.

This bumper maintains essential OEM functionality by retaining the factory backup sensors, trailer hitch, trailer plug, and license plate lighting. It features recessed mounting points for two 3-inch light pods behind paintable aluminum mesh panels, allowing for customizable rear lighting. Please note that while it retains parking sensors, it is not compatible with the factory blind spot detection (BSM) module.

• Replaces factory bumper using existing mounting points
• Two reinforced 3/4-inch D-ring recovery mounts
• Integrated corner and center side steps for improved bed access
• Dual 3-inch light pod mounts behind paintable mesh panels
• Micro-texture black powder coat finish for durability and corrosion resistance
• Retains factory parking sensors, hitch, trailer plug, and license plate lights
• Manufacturer Part Number: RBTT1-04

Fits all 2018-2025 Jeep Wrangler JL and Unlimited models (including 4xe, Rubicon 392, and Sahara).

The DV8 Offroad MTO (Made To Overland) Series Rear Bumper is engineered for heavy off-road use and extreme trail durability. This full-width bumper features tapered wings to maintain clearance while matching the lines of factory or aftermarket fenders. It is designed to retain critical utility, including the factory hitch, harness, and parking sensors, ensuring you don't lose OEM functionality when upgrading your armor.

Trail-ready features include two 1-inch thick clevis mounts for D-ring shackles and integrated mounting points for two 3-inch light pods located behind perforated aluminum accent panels. To resolve common spare tire clearance issues, this bumper includes a license plate relocation bracket and light to keep your plate visible and legal. On the interior, welded zip-tie tabs provide a secure solution for clean wire routing during installation.

• Part Number: RBJL-13
• Full-width design compatible with factory and aftermarket fenders
• Retains factory parking sensors (MPRSNSR-01 recommended for sensor mounting)
• Accommodates up to a 37-inch tall tire on the factory spare mount
• Includes license plate relocation bracket and LED plate light
• Dual 1-inch thick D-ring mounts
• Integrated mounts for (2) 3-inch light pods
• Bolt-on installation requires no vehicle modifications
• Compatible with TCJL-13 bumper-mounted tire carrier

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models including Sport, Sahara, Rubicon, and 4xe.

The DV8 Offroad FS-7 Series Rear Bumper provides a sleek, mid-width profile designed for clearance and functionality on the trail. Engineered to accommodate up to a 37-inch spare tire using the factory carrier and wheels, this bumper ensures you can carry a full-size spare without interference. The assembly includes a dedicated license plate relocation bracket and light to move your plate away from the spare tire area for better visibility and legal compliance.

Built for recovery and utility, the FS-7 features dual 1-inch thick reinforced mounts compatible with 7/8-inch shackle pins. For integrated lighting, the bumper includes shielded mounting positions for two 3-inch pod lights behind perforated aluminum accent panels. To simplify installation, welded-in zip tie tabs allow for clean wire management, while the design maintains compatibility with the factory hitch and rear parking sensors (use of sensor bezels MPRSNSR-01 is recommended).

• Fits up to 37-inch tire with factory wheels and spare tire mount
• Two 1-inch thick D-ring mounts for 7/8-inch shackle pins
• Mounting options for (2) 3-inch pod lights with perforated aluminum accents
• Micro-texture black powder coat finish for durability
• Compatible with factory hitch and rear parking sensors
• Includes license plate relocation bracket and light
• Welded-in zip tie tabs for clean wiring
• Manufacturer Part Number: RBJL-12

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including 4xe, Rubicon 392, Sahara, Sport, and Willys.

The DV8 Offroad FS-15 Series Rear Bumper (RBJL-11) is engineered for aggressive rock crawling where clearance is critical. Featuring a low-profile, high-clearance design, this bumper maximizes departure angles while providing robust protection. It is a direct-fit, bolt-on upgrade that maintains your Jeep’s utility by remaining fully compatible with the factory hitch and wiring harness.

For vehicles equipped with parking sensors, the FS-15 includes precision cutouts to retain full electronic functionality; for those without sensors, included plugs ensure a finished look. The bumper also accommodates up to a 37-inch spare tire on the factory carrier. To ensure legal compliance after installation, a license plate relocation bracket and integrated LED light are included in the box.

• High-clearance design optimized for off-road obstacles and rock crawling.
• Durable steel construction with a micro-texture black powder coat finish.
• Includes (2) 1-inch thick D-ring mounts designed for 7/8-inch shackle pins.
• Integrated sensor cutouts and hole plugs for a clean, factory-integrated look.
• Welded-in zip tie tabs for secure and organized wire management.
• Includes license plate relocation bracket and license plate light.
• Compatible with factory trailer hitch and spare tires up to 37 inches.
• Manufacturer Part Number: RBJL-11

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models, including Sport, Sahara, Rubicon, and 4xe trim levels.

The DV8 Offroad Spec Series Rear Bumper is engineered for dedicated rock crawling and technical trail use. This ultra-low profile design maximizes departure angles and provides essential rear-end protection without the bulk of a full-width bumper. Constructed for durability, it features a micro-texture black powder coat finish complemented by a satin black accent panel for a refined, multi-faceted look.

This bumper is a direct bolt-on solution that maintains factory utility by retaining backup sensor functionality. For recovery and visibility, it includes two integrated clevis mounts for D-ring shackles and mounting points for two 3-inch light pods to provide supplemental trail lighting. To ensure a clean install, the bumper features welded-in zip tie tabs for professional wire management.

• High clearance design for aggressive rock crawling
• Accepts (2) 3-inch pod lights for supplemental lighting
• Integrated clevis mounts for D-ring recovery shackles
• Retains factory backup sensor functionality
• Micro-texture black powder coat with satin black accent panel
• Includes license plate relocation bracket and plate light
• Direct-fit bolt-on installation
• Manufacturer Part Number: RBJL-09

Fits 2019-2025 Ram 2500 and 3500 heavy-duty trucks across various trims including Tradesman, Big Horn, Laramie, Limited, and Power Wagon.

The DV8 Offroad Spec Series Rear Bumper provides a full-width protective solution for the 2019-2025 Ram HD platform. Engineered for versatility, this bumper is compatible with both single and dual-tip exhaust configurations and maintains full functionality of the factory hitch. The bolt-on design installs without the need for cutting or permanent vehicle modification, utilizing factory mounting points for a secure fit.

Constructed with integrated mounts for two 3-inch pod lights, this bumper enhances rear-facing illumination for work or trail use. It supports both 4- and 6-sensor parking systems and reuses the factory license plate lights. To simplify installation on sensor-equipped trucks, DV8 recommends using their MPRSNSR-01 sensor bezels. The exterior is finished in a durable micro-texture black powder coat with satin black aluminum accent plates for added corrosion resistance and a clean, technical aesthetic.

• Manufacturer Part Number: RBDR2-05
• Direct bolt-on installation; no cutting required
• Accommodates (2) 3-inch pod lights for auxiliary lighting
• Compatible with factory parking sensors and license plate lights
• Welded-in zip tie tabs for clean wiring management
• Durable micro-texture black powder coat finish with aluminum accents
• Fits models with single or dual-tip exhaust

Fits select 2020-2023 Chevrolet Silverado 2500 HD and GMC Sierra 3500 HD models.

The DV8 Offroad Spec Series Rear Bumper (RBCS2-03) provides a rugged, full-width protection solution for heavy-duty trucks without sacrificing modern factory features. Engineered for a direct bolt-on installation with no cutting required, this bumper maintains full compatibility with your OEM parking sensors, license plate lights, and factory receiver hitch. It is specifically designed to accommodate Blind Spot Monitoring (BSM) systems and includes block-off plates for vehicles not equipped with sensors.

This bumper is finished in a durable micro-texture black powder coat and features satin black aluminum accent plates for a clean, technical look. For improved visibility on the trail, the design includes mounting provisions for two 3-inch rear-facing pod lights and integrated welded-in zip tie tabs for secure, professional wire management.

• Full-width design for maximum rear-end coverage and off-road protection
• Direct bolt-on installation utilizing factory mounting points
• Mounting provisions for (2) 3-inch rear-facing LED pod lights
• Fully compatible with factory hitch, parking sensors, and BSM functionality
• Micro-texture black powder coat finish with satin black aluminum accents
• Includes BSM block-off plates and welded zip tie tabs for wire management
• Manufacturer Part Number: RBCS2-03

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The DV8 Offroad RBCS1-04 is a low-profile, lightweight prerunner-style tube rear bumper designed to enhance your truck's off-road clearance without sacrificing factory features. This direct-fit, bolt-on bumper integrates seamlessly with your vehicle by utilizing the factory license plate lights and parking sensors. Constructed with a sleek tube-based design and finished in a durable micro-texture black powder coat, it provides a rugged yet refined appearance.

For added utility, this bumper includes integrated mounts for two 3-inch pod lights and features welded-in zip tie tabs to ensure clean wire management. Whether your truck has a single or dual exhaust setup, the RBCS1-04 is compatible with both and includes dedicated covers for dual exhaust tips. It is also designed to work perfectly with your factory trailer hitch.

• Direct-fit/bolt-on design for a straightforward installation.
• Compatible with factory parking sensors and license plate lights.
• Integrated mounts for (2) 3-inch pod lights.
• Sleek prerunner-style tube construction with CNC logo end caps.
• Micro-texture black powder coat finish for superior corrosion resistance.
• Compatible with single or dual exhaust (includes dual tip covers).
• Retains use of the factory receiver hitch.
• Welded zip tie tabs for organized electrical routing.
• Manufacturer Part Number: RBCS1-04

Fits 2021-2026 Ford Bronco all trim levels, including Raptor, Badlands, Wildtrak, and Everglades.

The DV8 Offroad Competition Series Rear Bumper (RBBR-05) is engineered for owners who demand a high-clearance, sleek design that maintains full vehicle utility. This bumper features a fully bolt-on installation that requires no drilling or permanent modification to your chassis. It is finished in a durable micro-texture black powder coat and accented with satin black aluminum panels and an aluminum-backed logo for a premium, rugged look.

This bumper is designed to accommodate up to a 37-inch spare tire on the factory carrier while retaining full use of your OEM tow hitch. It provides mounting points for two 3-inch light pods to enhance rear-facing visibility on the trail. For recovery operations, the bumper includes two 1-inch thick D-ring mounts that accept standard 7/8-inch pins. Integrated zip tie tabs are welded into the structure to ensure clean, secure wire management for your auxiliary lighting and sensors.

• Fits up to a 37-inch spare tire on the OEM carrier
• Retains full use of factory tow hitch
• Two 1-inch thick D-ring mounts (accepts 7/8-inch pins)
• Mounting points for two 3-inch light pods
• Welded-in zip tie tabs for clean wire management
• Micro-texture black powder coat finish with satin black aluminum accents
• Direct bolt-on installation; all mounting hardware included
• Manufacturer Part Number: RBBR-05

Fits select 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

The DV8 Offroad Competition Series Rear Bumper (RBBR-04) is engineered for high-clearance off-roading, drawing inspiration from desert racing aesthetics. This bumper features a robust steel tube and plate construction with a low-profile design that provides clearance for up to a 37-inch spare tire. To maintain factory utility, the bumper includes mounting holes for OEM reverse sensors and is fully compatible with the factory tow hitch.

For additional customization and lighting, the bumper includes two light mounts designed for 3-inch LED pods and two paintable aluminum accent panels to personalize your build while reducing weight. Installation is a straightforward bolt-on process using factory mounting points.

• Construction: High-strength steel tube and plate
• Finish: Durable black powder coat with paintable aluminum accents
• Lighting Compatibility: Dual mounts for 3-inch LED pods
• Tire Clearance: Fits up to a 37-inch spare tire
• Factory Integration: Retains OEM backup sensors and factory tow hitch
• Installation: Direct bolt-on; no drilling or welding required
• Manufacturer Part Number: RBBR-04