Fits 2019-2023 Ford Ranger Lariat, XL, and XLT models.

The ARB Summit Rear Bumper (5640200) provides heavy-duty rear-end protection for the Ford Ranger without sacrificing factory utility. Engineered with press-formed steel wings and lower diffuser panels, this bumper mimics the factory tub profile while offering significantly higher impact resistance than the original equipment. This design specifically retains the OE towbar assembly, trailer wiring harness, and license plate illumination for a seamless installation.

• Durable steel construction for maximum off-road and street protection
• Finished in Integrit textured black powder coat for superior corrosion resistance
• Retains factory OE towbar, trailer wiring, and license plate lighting
• Fully compatible with factory parking sensors
• Press-formed wings designed to complement the vehicle's body lines
• Compatible with optional lower protection tube (PN 5740200, sold separately)
• Manufacturer Part Number: 5640200

Fits 2007-2014 Toyota FJ Cruiser (Base, Trail Teams Special Edition, and TRD Special Edition models).

The ARB Summit Rear Bumper provides the ultimate combination of rear-end protection and utility for the FJ Cruiser. Engineered around a heavy-duty tubular steel subframe, this bumper is finished in a durable textured black powder coat to withstand harsh off-road environments. This vehicle-specific design is optimized to maintain maximum ground clearance and improve departure angles while offering integrated towing capabilities.

Designed for the modern overlander, the Summit bumper includes dedicated mounting provisions for an ARB air compressor, trailer camera wiring, a 50 amp Anderson plug, and standard trailer plug wiring. For recovery and maintenance, the assembly features four easily accessible jack points compatible with both the ARB Jack and traditional Hi-Lift jacks.

• Manufactured from high-strength steel for maximum protection
• Durable textured black powder coat finish
• Integrated heavy-duty tow hitch
• Four integrated ARB Jack/Hi-Lift jack points
• Provisions for 50A Anderson plug and trailer camera wiring
• Designed specifically for vehicles without parking sensors
• Manufacturer Part Number: 5620010B

Fits 2007-2014 Toyota FJ Cruiser (Base, Trail Teams Special Edition, and TRD Special Edition).

The ARB Summit Rear Bumper (MPN 5620010) combines vehicle protection with off-road functionality. Built around a high-strength tubular steel subframe and finished in a textured black powder coat, this bumper is engineered to improve departure angles and ground clearance while providing a secure mounting platform for essential trail equipment.

• Integrated Utility: Includes a built-in tow hitch and dedicated mounting provisions for an ARB air compressor, trailer camera wiring, a 50 amp Anderson plug, and trailer plug wiring.
• Recovery Support: Features four easily accessible jack points designed for use with the ARB Jack or Hi-Lift jack equipment.
• Durable Construction: Manufactured from heavy-duty steel for maximum protection against impacts and terrain obstacles.
• Sensor Compatibility: This model is specifically suited for vehicles without rear parking sensors.

Note: This part number includes the rear bumper assembly only. A vehicle-specific fit kit is required for installation and must be purchased separately.

Fits 1998-2007 Toyota Land Cruiser Base (100 Series IFS).

The ARB Summit Rear Bumper (MPN 5613210) provides high-clearance protection and heavy-duty utility for the 100 Series Land Cruiser. Engineered with a tubular steel subframe and finished in a durable textured black powder coat, this bumper is designed to withstand rigorous off-road use while maintaining a 3500kg towing capacity. This vehicle-specific design ensures excellent departure angles and integrates seamlessly with the chassis.

This bumper is suitable for vehicles without parking sensors. Please note that the Summit rear bumper is modular and must be installed with either ARB wheel carriers, jerry can holders, or cover panels (sold separately).

• Manufactured from high-strength steel for maximum rear-end protection
• Integrated tow hitch with a 3500kg rating
• Four accessible jack points for ARB Jack and Hi-Lift equipment
• Pre-cut provisions for ARB air compressor, trailer camera wiring, 50 amp Anderson plug, and trailer plug wiring
• Optimized for improved ground clearance and off-road departure angles

Fits 1998-2007 Toyota Land Cruiser and Lexus LX470 Base models.

The ARB Classic Buffer Kit is a necessary component for completing the installation of the ARB Sahara Tube bumper (part number 3913160) when adding the optional polished center hoop. These molded protection buffers are designed to integrate perfectly with the bumper assembly, providing a finished, professional look while protecting the structural components of the Sahara bar.

• Manufacturer Part Number: 5100160
• Required for ARB bumper part number 3913160 with optional polished hoop
• Durable molded construction for impact resistance and longevity
• Designed to complement the unique styling of the Sahara Tube series
• Includes necessary buffers for a complete installation

Fits 1998-2002 Toyota Land Cruiser and Lexus LX470.

The ARB Sahara Bar Center Tube (MPN: 5100050) is an optional accessory designed to provide a distinct, finished look to the ARB Sahara bumper. Unlike generic tubes, ARB uses an internal mandrel bender to shape the center tube, ensuring even wall thickness and structural integrity throughout every bend.

This kit includes molded protection buffers and a complete buffer kit to ensure a seamless fit and a professional finish on your vehicle's front-end protection system. Whether you are replacing a damaged component or customizing a new Sahara Bar, this tube provides the precise fitment and durability expected from ARB 4x4 Accessories.

• Part Number: 5100050
• Mandrel-bent tubing for uniform wall thickness and strength
• Includes molded protection buffers and hardware kit
• Designed for compatibility with ARB Sahara Bar systems
• Enhances front-end styling and protection

Fits the 2016 Toyota Tacoma (Limited, SR, SR5, TRD Off-Road, and TRD Sport) equipped with an ARB Summit Bumper.

When equipping your Toyota Tacoma with an ARB Summit Bumper and a recovery winch, the license plate often obstructs the fairlead opening. The ARB Flip Up License Plate Kit (MPN: 3500630) provides a practical and secure mounting solution. This kit allows the plate to remain in a legal, visible position during daily driving but easily flips up and out of the way when you need to access the winch cable or fairlead for recovery operations.

• Designed specifically for compatibility with ARB Summit Series Bumpers
• Hinged design allows for quick access to winch hawse or roller fairleads
• Prevents the need to choose between winch functionality and street legality
• Includes necessary hardware for a secure installation
• Manufacturer Part Number: 3500630

Fits select 2007-2015 Jeep Wrangler (JK/JKU) and Grand Cherokee (WK2) models.

The ARB Hawse Fairlead Spacer Kit is an essential winch installation component designed for ARB bumpers originally equipped with recessed roller fairlead mounts. When upgrading to synthetic winch line and a hawse fairlead, this kit provides the necessary spacing to ensure proper alignment and clearance within the bumper shell. This prevents rope interference and ensures the fairlead is positioned correctly for safe recovery operations.

• Manufacturer Part Number: 3500600
• Designed specifically for ARB bumpers with recessed fairlead mounting points
• Facilitates the installation of hawse fairleads on Jeep-specific ARB bars
• Durable hardware construction for reliable recovery use
• Part of the ARB Winch Install Kit series

Fits 2006-2009 Hummer H3 models.

The ARB Mud Flap (MPN: 3500370) is a necessary component for completing the installation of an ARB Rear Bumper on the Hummer H3. Because the original equipment (OE) mud flaps cannot be reused once the factory bumper is removed, these custom flaps are engineered to provide proper tire coverage and protection from road debris when utilizing ARB's rear protection systems.

• Required for completing ARB Rear Bumper installations
• Replaces OE mud flaps that are incompatible with aftermarket rear bumpers
• Durable construction built to withstand off-road use and road grime
• Designed specifically for the Hummer H3 chassis
• Sold as a single unit
• Manufacturer Part Number: 3500370

The ARB 3500050 Spacer Kit is a specialized hardware solution designed to facilitate the installation of Warn Low Mount Winches (LMW) into ARB winch-compatible bumpers. This kit provides the precise spacing required to ensure proper alignment between the winch housing, the bumper mounting cradle, and the fairlead opening.

By providing the correct offset, these spacers prevent mechanical interference and ensure a secure, flush fitment within the bumper. This is an essential component for completing a professional winch installation on ARB Deluxe, Sahara, or Commercial bumpers when using a low-mount winch configuration.

• Specifically engineered for Warn Low Mount Winch (LMW) applications
• Provides necessary clearance for winch-to-bumper integration
• Critical for maintaining proper bolt-up alignment and recovery safety
• Genuine ARB hardware for long-term durability
• Manufacturer Part Number: 3500050

Fits 2021-2025 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, Outer Banks, and Wildtrak).

The ARB Summit Bumper provides a full replacement solution engineered for demanding 4WD environments. Designed to complement both wide and narrow fender flares, this bumper offers superior off-road protection while maintaining full compatibility with modern vehicle tech, including adaptive cruise control and parking sensors. The wing design is optimized for clearance, allowing the fitment of up to 37-inch tires when paired with a suitable suspension lift and wheel offset.

• Construction: Durable steel with an Integrit black textured powder coat finish
• Recovery: Twin forged bar-mounted ARB Rated 8T recovery points
• Winch Compatibility: Rated for winches up to 10,000 lbs
• Jacking Points: Twin jack points in the lower pan designed for the ARB Jack or mechanical hi-lift jacks
• Lighting: Provisions for driving lights and compatible with original equipment (OE) LED fog lights
• Part Number: 3480010B

Fits select 2021-2025 Ford Bronco models including Badlands, Big Bend, Black Diamond, Outer Banks, and Wildtrak.

The ARB Summit Bumper (MPN 3480010) is a full-replacement front bar engineered for heavy-duty 4WD use and recovery. This bumper provides critical off-road protection while maintaining the vehicle's essential technology, including adaptive cruise control and parking sensors. Constructed from durable steel with a textured Integrit black powder coat finish, the wing design is specifically shaped to accommodate 37-inch tires when the vehicle is equipped with a suitable suspension lift and rim offset.

• Winch Compatibility: Rated for winches up to 10,000lb
• Recovery Points: Twin forged bar-mounted ARB Rated 8T recovery points
• Jack Points: Dual points in lower pan designed for the ARB Jack or mechanical jacks
• Construction: Heavy-duty steel for maximum front-end protection
• Finish: Integrit black textured powder coat
• Lighting: Accommodates original equipment (OE) LED fog lights; includes provision for additional driving lights
• Manufacturer Part Number: 3480010

Note: A vehicle-specific fit kit is required for installation and is not included with this bumper.

Fits 2017-2020 Chevrolet Colorado ZR2.

The ARB Summit Bumper (3462060KB) represents a modern evolution of the renowned ARB Deluxe Bumper, specifically engineered to complement the styling and performance of the Chevrolet Colorado ZR2. This winch-compatible frontal protection system is built on ARB’s proven airbag-compatible mounting architecture, ensuring that critical safety systems remain functional while providing maximum off-road durability. The design features a 30mm edge radius on the wings and center pan, paired with 60.3mm top tubing for a robust profile.

• Durable steel construction with multi-fold, tapered wings for optimized strength and approach angles.
• Compatible with most electric low-mount winches up to 10,000 lb capacity.
• Twin high-lift jack points located securely beneath durable two-piece polyethylene buffers.
• Airbag-compatible chassis mounting system maintains factory safety compliance.
• Includes redesigned fog light surrounds and integrated provisions for driving lights.
• Wider press-formed cover straps and 60.3mm top tubing for superior structural rigidity.
• Manufacturer Part Number: 3462060KB
• Note: Hawse fairlead spacer kit (part 3500600) is required when fitting a hawse fairlead.

Fits 2017-2020 Chevrolet Colorado ZR2.

The ARB Summit Bar provides a robust, integrated protection system for the 2017-2020 Chevrolet Colorado ZR2. Engineered to mitigate damage from animal strikes and off-road obstacles, this bumper features a three-piece split pan grille, press-formed cover straps, and a recessed winch control box mount for a clean, factory-plus appearance. Constructed from durable steel with an Integrit textured black powder coat, it serves as a secure mounting platform for essential recovery gear and accessories.

• Winch Compatibility: Accommodates most electric low-mount winches up to 10,000 lb capacity.
• Structural Design: Multi-fold, tapered wings for optimal strength and improved approach angles.
• Safety Engineered: Airbag-compatible chassis mounting system ensures factory safety systems remain functional.
• Integrated Recovery: Twin Hi-Lift jack points located beneath each durable two-piece buffer.
• Accessory Provisions: Predrilled points for mounting driving lights and CB antennas.
• Manufacturer Part Number: 3462060K.

Note: This part requires a vehicle-specific fit kit for installation (sold separately). A hawse fairlead spacer kit (part 3500600) is required if fitting a hawse fairlead.

Fits select 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) models.

The ARB Bondi Deluxe Winch Bumper (3450460) combines the heritage styling of classic Wrangler protection with modern engineering. This bumper features a single-piece, press-formed center pan reinforced by a silver powder-coated bash plate and a low-slung, forward-facing 3-inch main hoop. Designed for recovery and versatility, it includes two high-visibility 8T-rated recovery points and integrated jacking points for secure field repairs.

• Two 8T-rated red chassis-mounted recovery points and reinforced jacking points
• Durable Integrit matte black finish with zinc shield pretreatment for superior corrosion resistance
• Press-formed apertures designed to retain factory OE plastic bumper fog lights
• Separate winch cradle design for simplified installation and maintenance
• Integrated mounts for driving lights and dual antennas welded to the cross tube
• Includes a silver powder-coated bash plate underpanel for underbody protection
• Compatible with roller or hawse fairleads

Fits select 2018-2025 Jeep Wrangler JL, Wrangler Unlimited, and Gladiator JT models. The ARB Stubby Bumper is engineered for off-roaders running 37-inch or larger tires who require maximum approach angles and tire clearance. By maintaining a width only slightly wider than the vehicle chassis, this bumper eliminates tire rub common with full-width bars during extreme articulation.

Constructed from 4mm laser-cut and folded steel, this bumper features CMT (Cold Metal Transfer) pulse welding on all exterior surfaces for superior strength and a clean finish. The integrated winch platform accommodates most traditional low-mount Warn winches and narrow-pattern competition winches. For recovery, the bumper includes dual 0.8-inch 350-grade steel recovery points that tie directly into the chassis and dedicated jacking points for the ARB JACK or mechanical farm jacks.

• Manufacturer Part Number: 3450450
• Manufactured from 4mm laser-cut and folded steel sheet
• 0.8-inch 350-grade steel recovery points through-bolted to chassis
• ERW center frame tube with antenna/driving light tabs
• Dual flip-up license plate mounts (roller and hawse fairlead compatible)
• Zinc-plated hardware for maximum corrosion resistance
• Provision for ARB and IPF driving lights
• CMT pulse welded exterior surfaces

Fits select 2018-2025 Jeep Wrangler JL and Gladiator JT models (including Rubicon, Sahara, Sport, Mojave, and 4xe variants).

The ARB Deluxe Winch Bumper is a heavy-duty replacement for your factory front bumper, designed to provide maximum full-width protection without compromising style. Engineered to accommodate up to 37-inch tires, this bumper features outer wings that perfectly align with both Rubicon and non-Rubicon factory flares. It comes ready for recovery with an integrated winch mounting platform that supports most low-mount Warn winches up to 10,000 lbs.

Construction is focused on durability and utility, featuring 0.8-inch welded recovery points and dedicated jack points designed for use with the ARB JACK or traditional mechanical jacks. To maintain a clean OE appearance, the 3450440 includes brackets to retain your factory halogen or LED fog lights. The steel structure is pre-treated with a zinc shield for superior corrosion resistance and finished in ARB's Integrit textured powder coat, a matte finish designed to replicate the look of automotive-grade black plastic.

• Full-width steel construction for maximum front-end protection
• Accommodates up to 37-inch tires
• Integrated winch mounting platform (up to 10,000 lb capacity)
• Retains factory halogen or LED fog lights with included brackets
• 0.8-inch welded recovery points for snatch or double-line pulls
• Integrated jack points for safe vehicle recovery
• Dual antenna tabs for mounting communication antennas or driving lights
• Zinc-shielded pre-treatment with Integrit textured black powder coat finish
• Airbag-compatible mounting system
• Part Number: 3450440

Fits 2007-2018 Jeep Wrangler and Wrangler JK (2-Door and 4-Door Unlimited).

The ARB Stubby Front Bumper is engineered for off-roaders prioritizing maximum approach angles and clearance for larger diameter tires. Constructed from 4mm laser-cut and folded steel, this bumper provides a compact, heavy-duty platform for winch mounting and vehicle recovery. The design features a 3-inch main tube and upper wing sections that tie directly into the chassis mounting points for superior strength.

Equipped with 0.79-inch (20mm) thick 350-grade steel recovery points and twin jacking points, this bumper is ready for technical trail use. It accommodates most traditional low-mount style winches and narrow-mount competition winches, ensuring you have the pulling power needed for difficult recoveries.

• 4mm laser-cut and folded steel construction
• Durable textured black powder coat finish
• 3-inch main tube and upper wing section
• 0.79-inch thick 350-grade recovery points
• Integrated twin jacking points for high-lift jacks
• Built-in antenna tabs and driving light brackets
• Zinc-plated hardware for maximum corrosion resistance
• Compatible with most low-mount and competition winches
• Manufacturer Part Number: 3450430

Fits 2014-2016 Jeep Grand Cherokee Laredo, Limited, Summit, and 75th Anniversary models.

The ARB Deluxe Bar for the WK2 Grand Cherokee provides premium front-end protection engineered specifically for 4x4 off-road use. ARB engineers utilized 3D scanning to ensure precise fitment across multiple vehicle configurations, conducting articulation tests for clearance and winch load testing to maintain chassis integrity. The multi-fold upswept and tapered wing design enhances approach angles for technical terrain, while the split-pan design facilitates air flow to the cooling system.

• Durable steel construction with a black powder coat finish
• Twin Hi-Lift jacking points and extensive under-protection panels
• Compatible with most electric low-mount winches up to 10,000 lb capacity
• Winch installation requires kit 3540050 (includes folding license plate bracket)
• Adaptive cruise control/radar-equipped models require fitting kit 3550110
• Fog light installation requires halogen (3500440) or LED (3500520) loom
• Hawse fairlead applications require spacer kit 3500600
• Manufacturer Part Number: 3450420B

Fits 2014-2016 Jeep Grand Cherokee (WK2) models including Laredo, Limited, Overland, SRT, Summit, and 75th Anniversary.

The ARB Deluxe Bar provides robust frontal protection and off-road utility for the WK2 Grand Cherokee. Engineered to integrate seamlessly with the vehicle's chassis, this bumper features a multi-fold upswept and tapered wing design to maximize approach angles. The split pan design ensures superior strength while maintaining critical airflow to the engine and cooling systems. Constructed from high-strength steel and finished in a durable satin black powder coat, this bar is built to withstand rigorous trail use and articulation.

• Durable steel construction with a hard-wearing satin black powder coat
• Multi-fold upswept and tapered wing design for improved approach angles
• Split pan design for maximum strength and optimal airflow
• Twin Hi-Lift jacking points for easier recovery
• Extensive under-protection panels to shield vulnerable components
• Compatible with most electric low-mount winches up to 10,000 lb capacity
• Winch installation kit (3540050) required for winch fitment
• Radar fitting kit (3550110) required for radar-equipped vehicles
• Optional ARB fog light kits available (Halogen or LED)
• Manufacturer Part Number: 3450420

Fits 1987-2006 Jeep Wrangler YJ and TJ models including Sport, Sahara, Rubicon, Unlimited, SE, and X.

The ARB Deluxe Multi-Fit Winch Bumper is a fully engineered front protection system designed to replace the factory bumper on YJ and TJ Wranglers. Built for the rigors of off-road recovery and remote travel, this bumper is constructed from cold-rolled sheet steel and .250-inch heavy-grade wall tubing. Its winch-ready design supports most electric winches with a capacity up to 10,000 lbs, providing a stable platform for recovery operations.

• Suits most electric winches with up to 10,000 lb capacity
• Constructed from .250-inch heavy-grade wall tubing and cold-rolled sheet steel
• Features integrated tow points for secure recovery
• Includes provisions for mounting fog lights and driving lights
• Fully engineered mounting system for complete vehicle integration
• Manufacturer Part Number: 3450150

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT models.

The ARB Summit Bumper represents a significant evolution in front-end protection, combining a modern design with the rugged durability required for off-road environments. This comprehensive bundle includes the Summit bumper, mounting hardware, a winch installation kit, and a fog light kit for a complete front-end transformation. Engineered for the 2019-2023 Ford Ranger, the bumper features multi-fold, tapered wings to improve approach angles and a three-piece split pan grille for optimal airflow and winch clutch access.

Built from heavy-duty steel, the bumper is finished in ARB's signature Integrit textured black powder coat, providing superior corrosion resistance and a low-sheen matte appearance. The system is designed to integrate seamlessly with factory safety features, including front parking sensors and adaptive cruise control, and utilizes an air bag-compatible chassis mounting system for peace of mind.

• Manufacturer Part Number: 3440560KB
• Includes bumper, vehicle-specific mount kit, winch install kit, and fog light kit
• Durable steel construction with Integrit textured black finish
• Recessed winch control box mount for a clean, integrated look
• Twin Hi-Lift jack points located beneath each buffer
• Compatible with factory front parking sensors and adaptive cruise control
• Provision for mounting additional driving lights
• Air bag compatible mounting system for safety compliance

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT.

The ARB Summit Bar provides the 2019-2023 Ford Ranger with industry-leading frontal protection and a rugged, integrated appearance. Engineered for serious off-road use, it features a durable steel construction with multi-fold, tapered wings to optimize strength and approach angles. This bumper is finished in ARB's signature Integrit™ textured black powder coat, delivering a high-quality, ultra-low-sheen matte finish with superior corrosion resistance.

Designed with modern technology in mind, the Summit Bar is fully compatible with factory front parking sensors and adaptive cruise control systems. The design includes a three-piece split pan grille with access doors for winch clutch operation and a recessed winch control box mount for a clean, streamlined look. An airbag-compatible mounting system ensures that vehicle safety features remain fully functional.

• Durable steel construction designed for maximum vehicle protection
• Textured black Integrit™ finish for a low-sheen, corrosion-resistant surface
• Airbag-compatible chassis mounting system
• Compatible with factory front parking sensors and adaptive cruise control
• Three-piece split pan design with winch clutch access
• Recessed winch control box mount and twin Hi-Lift jack points
• Provisions for ARB Intensity LEDs and other driving lights
• Includes bumper, winch install kit, and fog light kit
• Manufacturer Part Number: 3440560K

Fits 2009-2017 Nissan Frontier (Desert Runner, LE, PRO-4X, S, SE, SL, SV, XE).

The ARB Deluxe Bumper provides a fully engineered mounting system that completely replaces the factory bumper, delivering superior front-end protection for remote area travel. Constructed from durable steel with a multi-fold upswept and tapered wing design, this bumper optimizes approach angles while maintaining high-strength vehicle integration. The split pan design ensures maximum airflow to the engine while providing a rigid platform for winch mounting and recovery.

• Durable steel construction with a corrosion-resistant black powder coat finish.
• Compatible with most electric low-mount winches up to 10,000 lb capacity.
• Twin Hi-Lift jacking points and integrated urethane buffers for added utility.
• Extensive under-protection panels shield critical drivetrain components.
• Built-in provisions for auxiliary driving lights and fog light kits.
• Manufacturer Part Number: 3438320B

Note: Installation of fog light kits part 3500440 (halogen) or 3500520 (LED) requires a separate loom. Hawse fairlead spacer kit part 3500600 is required when using a hawse fairlead. Optional ARB fog light kits are available under part 6821201 (halogen) or 3500890 (LED).

Fits select 2009-2017 Nissan Frontier models including PRO-4X, Desert Runner, and S/SL/SV trims. The ARB 3438320 Deluxe Combination Bar is a fully engineered replacement for the factory bumper, designed to provide superior protection and functionality for off-road and remote area travel.

Constructed from durable steel with 0.250-inch heavy-grade wall tubing, this bumper features a multi-fold upswept and tapered wing design for improved approach angles and structural integrity. The split pan design facilitates optimal airflow to the radiator while providing a secure mounting platform for electric low-mount winches up to 10,000 lb capacity. Finished in a durable black powder coat, the bar includes urethane buffers and extensive under-protection panels to safeguard critical front-end components.

• Manufacturer Part Number: 3438320
• Compatible with most electric low-mount winches up to 10,000 lbs
• Integrated twin Hi-Lift jacking points and provisions for driving lights
• Requires separate loom (3500440 or 3500520) for optional fog light kits
• Optional ARB fog light kits: 6821201 (Halogen) or 3500890 (LED)
• Hawse fairlead spacer kit (3500600) required for hawse fairlead fitment
• Note: Fit Kit is NOT included and must be purchased separately

Fits 2005-2015 Nissan Xterra (Off-Road, PRO-4X, S, SE, and X).

The ARB Deluxe Combination Bar is a fully engineered front protection system that completely replaces the factory bumper for superior off-road capability. Designed specifically for the N50-platform Nissan Xterra, this bumper utilizes a multi-fold upswept and tapered wing design to maximize approach angles. The split pan design facilitates optimal airflow to the cooling system while providing a high-strength foundation for winch mounting and recovery operations.

• Durable steel construction with a textured black powder coat finish
• Compatible with most electric low-mount winches up to 10,000 lb capacity
• Twin Hi-Lift jacking points integrated into the pan
• Heavy-grade wall tubing and durable urethane buffers for impact protection
• Provisions for driving lights and optional fog light kits
• Extensive under-protection panels to shield vital components
• Manufacturer Part Number: 3438270

Installation Note: This bumper requires a vehicle-specific fit kit for installation (not included). If installing a hawse fairlead, spacer kit part 3500600 is required. Specific wiring looms are required for fog light integration (3500440 for Halogen or 3500520 for LED).

Fits select 2005-2008 Nissan Frontier and 2005-2007 Nissan Pathfinder models.

The ARB 3438260 Deluxe Combination Bar is a fully engineered front protection system that completely replaces the factory bumper. Designed for remote area travel and off-road recovery, this bumper provides a secure mounting platform for electric low-mount winches up to 10,000 lbs. The multi-fold upswept and tapered wing design maximizes approach angles, while the split pan design facilitates airflow to the engine's cooling system.

Constructed from high-strength steel with a durable black powder coat finish, the bar includes twin Hi-Lift jacking points and urethane buffers for impact protection. Please note that this product requires a vehicle-specific fit kit for installation, which is sold separately.

• Compatible with most electric low-mount winches up to 10,000 lb capacity
• Durable steel construction with a protective black powder coat
• Multi-fold upswept and tapered wing design for improved off-road clearance
• Split pan design for structural integrity and radiator airflow
• Twin Hi-Lift jacking points and durable urethane buffers
• Extensive under-protection panels and heavy grade wall tubing
• Provision for driving lights and optional fog lights
• Manufacturer Part Number: 3438260

Installation Note: Fit kit not included. Hawse fairlead spacer kit (3500600) is required for hawse fairleads. Loom required when installing fog light kit 3500440 (Halogen) or 3500520 (LED).

Fits select 1998-2004 Nissan Frontier and 2000-2004 Nissan Xterra models. This ARB Deluxe Bumper (MPN: 3438110) is a fully engineered front protection system designed for remote area travel and recovery operations. Unlike standard brush guards, this bumper utilizes a comprehensive mounting system that completely replaces the factory unit, providing superior vehicle integration and structural integrity.

Constructed from durable steel with a black powder coat finish, the bumper features a multi-fold upswept and tapered wing design for improved approach angles and strength. The split pan design ensures optimal airflow to the radiator while maintaining protection for critical engine components. It is fully winch-compatible, accommodating most electric low-mount winches with up to a 10,000 lb capacity.

• Durable steel construction with black powder coat finish
• Compatible with electric low-mount winches up to 10,000 lb
• Heavy-grade wall tubing and extensive under-protection panels
• Twin Hi-Lift jacking points and OEM tow point retention
• Provisions for mounting driving lights
• Durable urethane buffers for impact absorption
• Manufacturer Part Number: 3438110

Fits select 1999-2004 Ford F-250 and F-350 Super Duty models. This bumper is also compatible with F-450 and F-550 models equipped with Dana 60 front axles only.

The ARB Deluxe Combination Front Bumper is a fully engineered mounting system designed to completely replace the factory bumper. Engineered for remote area travel and maximum protection, this bumper integrates seamlessly with the vehicle's chassis. The multi-fold upswept and tapered wing design provides optimal strength and improved approach angles for off-road terrain.

• Durable steel construction with a high-quality black powder coat finish
• Heavy-grade wall tubing for superior structural integrity
• Split-pan design for increased strength and improved airflow to the cooling system
• Extensive under-protection panels to shield critical front-end components
• Provisions for ARB fog lights and IPF driving lights
• Integrated twin Hi-Lift jacking points and durable urethane buffers
• Retains factory OEM tow points for reliable recovery
• Manufacturer Part Number: 3436030

Fits 1993-1997 Land Rover Defender 90 and 110 models. This ARB Deluxe Bumper bundle provides a fully engineered mounting system designed to replace the factory unit, offering superior protection and structural integrity for remote off-road travel.

Constructed from durable steel with a black powder coat finish, this bumper features a multi-fold upswept and tapered wing design to improve approach angles. The split-pan design ensures optimal airflow to the engine while maintaining maximum strength. Integrated features include twin Hi-Lift jacking points and urethane buffers for impact absorption.

• Compatible with most electric low-mount winches up to 10,000 lb capacity (requires winch install kit 3532070).
• Durable steel construction with extensive under-protection panels.
• Includes integrated indicator light mounting points.
• 1993-1996 model year surrounds and indicators are required for proper fitment on all applications.
• Note: Does not suit models equipped with the optional protruding grille; 1997 North American Spec (NAS) Defender 90 headlamp surrounds do not clear the bumper.
• Manufacturer Part Number: 3432300B