Fits 2016-2023 Toyota Tacoma (SR, SR5, Limited, Trail, TRD Sport, TRD Off-Road, and TRD Pro).

Enhance your front-end protection and off-road geometry with Body Armor 4x4 HiLine Series High Clearance Side Wings. These wings are engineered to integrate seamlessly with the Body Armor 4x4 HiLine bumper, providing a compact, tight-fitting profile that significantly improves approach and departure angles while creating the necessary clearance for larger tire setups.

Each wing is built for utility, featuring integrated mounting provisions for 6-inch single-row LED light bars (supporting both side and stem mounts). The wings are finished in a durable two-stage light texture black powder coat to resist corrosion and trail wear. While these components bolt directly to the HiLine bumper without modification, some trimming of factory plastics is required for a flush installation.

• Precision fit for 2016-2023 Toyota Tacoma models
• Optimized for increased clearance and oversized tires
• Compatible with 6-inch single-row LED light bars (side or stem mount)
• Durable two-stage light texture black powder coat finish
• Sold as a complete pair (driver and passenger sides)
• Manufacturer Part Number: TC-19339W
• Warranty: 3-Year Finish / Limited Lifetime Structural

Fits 2016-2023 Toyota Tacoma SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, Limited, and Trail models.

The Body Armor 4x4 HiLine Series Front Winch Bumper (TC-19339) is engineered for off-roaders who need recovery capability and front-end protection without the bulk of a full-width replacement. This low-profile, high-clearance design significantly improves approach angles while maintaining a sleek factory-integrated look. Built from heavy-duty 3/16" steel plate with a 1/4" winch mount, it is rated for up to a 10,000 lbs. winch and is specifically designed to accommodate WARN ZEON series winches. The bumper also features an integrated bull bar for grille protection and cut-outs for a 20" dual-row LED light bar.

Installation is a direct bolt-on process to the factory mounting points, though it does require trimming of the factory plastic bumper cover. It is designed to work seamlessly with the factory TRD skid plate. The assembly is finished in a durable two-stage light texture black powder coat to resist corrosion and trail wear.

• Manufacturer Part Number: TC-19339
• Material: 3/16" steel plate bumper with 1/4" winch mount
• Winch Capacity: 10,000 lbs. (Compatible with Warn Zeon series)
• Lighting: Fits one 20" dual-row LED light bar
• Includes: Integrated shackle recovery points and license plate bracket
• Finish: Two-stage light texture black powder coat
• Warranty: 3-year finish warranty / Limited lifetime structural warranty

Fits 2019-2024 Subaru Forester (Base, Limited, Premium, Sport, Touring, and Wilderness).

The Body Armor 4x4 HiLine series front winch bumper provides a rugged recovery solution and enhanced front-end protection for the Subaru Forester without requiring a full bumper replacement. Constructed from heavy-duty 3/16" steel plate, this bumper is engineered for off-road durability. The design includes an integrated skid plate that accommodates the factory plastic guard or most aftermarket skid plates, ensuring comprehensive underbody protection. For recovery operations, the bumper features dual integrated shackle points and a winch cradle capable of supporting winches up to 5,500 lbs.

• Manufacturer Part Number: SU-19340
• Supports winches with up to 5,500 lb capacity
• Bolt-on bull bar with mounting provisions for a 20" double-row light bar or individual auxiliary lights
• Built from 3/16" steel plate for maximum impact resistance
• Integrated shackle recovery points for secure rigging
• Finished in a durable two-stage light textured black powder coat
• 3-year finish warranty and limited lifetime structural warranty

Fits 2018-2023 Subaru Crosstrek models (Base, Hybrid, Limited, Premium, and Sport).

Equip your Subaru for technical terrain and recovery with the Body Armor 4x4 HiLine Series Front Winch Bumper. Engineered for off-road durability, this bumper is fabricated from heavy-duty 3/16-inch steel plate and finished in a two-stage light textured black powder coat for long-term corrosion resistance. The design features a bolt-on bull bar with integrated mounting points for a 20-inch double-row light bar or individual accessory lights.

This low-profile bumper is designed to accommodate winches up to 5,500 lbs, providing reliable self-recovery capability. It includes a bolt-on skid plate that works seamlessly with the factory plastic guard or most aftermarket skid plates. Integrated shackle recovery points provide secure attachment for D-rings, making it a functional upgrade for any trail-driven Crosstrek.

• Part Number: SU-19339
• Construction: 3/16-inch steel plate
• Winch Compatibility: Up to 5,500 lb capacity
• Lighting: Provisions for 20-inch double row light bar or individual lights
• Finish: 2-stage light textured black powder coat
• Hardware: Bolt-on bull bar and skid plate included
• Warranty: 3-year finish / Limited lifetime warranty

Fits select 2007-2024 Jeep Wrangler JK and JL models, including Unlimited and 4xe editions.

The Body Armor 4x4 Orion Series Mid-Width Front Bumper is engineered for off-roaders seeking a balance between comprehensive protection and high-clearance performance. Fabricated from heavy-duty 3/16-inch steel plate, this bumper features a compact profile designed to maximize approach angles and provide ample room for larger tires. Every unit includes an integrated grille guard and a protective skid plate to shield critical steering and cooling components from trail obstacles.

Recovery and utility are central to the Orion design, featuring a winch plate with a 12,000 lbs capacity compatible with WARN ZEON and most standard winches. Lighting mounts are pre-configured to accept an 18-inch single-row LED bar along with either two cube LEDs or factory fog lights. The assembly is finished in a robust two-stage light texture black powder coat for long-term durability in harsh environments.

• Construction: 3/16-inch steel plate with integrated shackle recovery mounts
• Finish: Two-stage light texture black powder coat
• Winch Rating: 12,000 lbs capacity (fits WARN ZEON)
• Lighting Capability: Mounts for 18" single-row LED bar and cube LEDs or OE fog lights
• Installation: Direct bolt-on; compatible with 4xe models with minor modifications
• Included Components: Grille guard, skid plate, and mounting hardware
• Manufacturer Part Number: JP-19536

Fits select 2018-2024 Jeep Wrangler and Wrangler Unlimited models (including Rubicon, Sahara, Sport, and 4xe).

The Body Armor 4x4 Full Width Rear Bumper (JL-2965) is engineered for trail protection and utility. Fabricated from heavy-duty 3/16" steel plate, this bumper features a wrap-around design compatible with both factory and aftermarket fender flares. The bumper is designed to maintain your vehicle's core utility, retaining the OEM tow hitch and providing precision cutouts for factory rear parking sensors. For night visibility, integrated cutouts accommodate LED cube lights, while an included bolt-on license plate frame features a DOT-approved light for street legality.

• Manufactured from high-strength 3/16" steel plate
• Durable two-stage light texture black powder coat finish
• Retains factory tow hitch and accommodates rear parking sensors
• Integrated LED cube light cutouts for auxiliary lighting
• Includes bolt-on license plate frame with DOT-approved light
• Compatible with optional Body Armor 4x4 tire carrier (Part #5298, sold separately)
• Manufacturer Part Number: JL-2965

Fits select 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Body Armor 4x4 Eco Series Rear Bumper (GM-2961) is a functional upgrade designed for owners who need increased durability without losing factory utility. Fabricated from 1/8-inch steel plate, this bumper provides a rugged alternative to the OE unit while retaining the factory tow hitch. It features built-in corner step pockets to improve access to the truck bed and includes mounting provisions for up to four cube LED lights. This bumper is fully compatible with factory backup sensors, ensuring your vehicle's safety systems remain functional after installation.

• Manufactured from heavy-duty 1/8-inch steel plate
• Retains factory tow hitch for seamless towing integration
• Integrated step pockets for easy truck bed access
• OE sensor compatible for continued use of parking aids
• Light fitment: Mounting points for four cube LED lights
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: GM-2961

Fits 2019-2022 Chevrolet Silverado 1500 Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT, and ZR2. This Body Armor 4x4 Ambush Series front bumper (MPN: GM-19344) provides a rugged, low-profile alternative to factory bumpers without the weight or bulk of a winch-ready unit.

Constructed from a combination of 3/16-inch and 1/4-inch cold roll steel, this bumper is engineered for heavy-duty protection. It features a two-stage light texture black powder coat finish for superior corrosion resistance. Designed as a direct bolt-on replacement, it maintains full OE parking sensor compatibility to preserve factory safety features.

• Material: 3/16" and 1/4" cold roll steel construction
• Recovery Points: Two integrated, welded D-ring mounts
• Lighting Compatibility: Center mount for 30" dual-row LED light bar and side mounts for two cube LEDs
• Finish: Two-stage light texture black powder coat
• Installation: Bolt-on design; no welding required
• Diesel Note: Intercooler shroud (PN: GM-5966) required for diesel engines; optional for gas engines

Fits 2014-2015 Chevrolet Silverado 1500 (High Country, LS, LT, LTZ, SSV, and WT).

The Body Armor 4x4 Eco Series Front Bumper (GM-19335) is engineered for Silverado owners seeking an aggressive aesthetic and improved protection without the excessive weight of a traditional winch bumper. Fabricated from 1/8-inch thick steel plate, this bumper provides a rugged look and durable front-end shielding while maintaining factory-level fit and finish.

This bumper is designed for a direct bolt-on installation to factory mounting points. It is fully compatible with OE parking sensors and includes a dedicated license plate bracket. To enhance night-time visibility, the Eco Series bumper features integrated mounts for a 20-inch dual-row LED light bar in the center and four cube LED pods in the wings.

• Constructed from 1/8" thick steel plate for high strength and low weight
• Pre-cut fitments for one 20" dual-row LED bar and four cube LEDs
• Full compatibility with factory OE parking sensors
• Simple bolt-on installation; no drilling required
• Non-winch capable design for streamlined profile
• Includes license plate relocation bracket
• Manufacturer Part Number: GM-19335

Fits 2017-2022 Ford F-250 and F-350 Super Duty (All Trims).

The Body Armor 4x4 Ambush XT Series front bumper is engineered to provide uncompromising front-end protection while maintaining the advanced technology of your Super Duty. This one-piece wrap-around bumper shields your grille and headlights with a 2-inch main tube and 1.25-inch to 1.50-inch supporting tubes. Unlike many aftermarket bumpers, the FD-20341 is specifically designed to retain your factory front camera and Adaptive Cruise Control (ACC) sensor functionality for seamless integration.

• Constructed from heavy-duty 3/16-inch and 1/4-inch cold-roll steel for maximum durability.
• Finished in a two-stage light texture black powder coat for long-lasting corrosion resistance.
• Integrated 2-inch receiver hitch and heavy-duty shackle recovery mounts for utility.
• Steel mesh screen allows maximum airflow to vital cooling components while blocking debris.
• Pre-cut mounts for one 30-inch dual-row LED light bar and four LED cubes.
• Direct bolt-on installation using factory mounting points; not winch compatible.
• Includes a 3-year finish warranty and limited lifetime structural warranty.

Fits 2021-2024 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, and Wildtrak).

The Body Armor 4x4 Odyssey Series Front Bumper (FB-19534) provides an aggressive, functional upgrade for the 6th-gen Ford Bronco. Engineered for the trail, this 2-in-1 style bumper is constructed from heavy-duty 3/16-inch and 1/4-inch steel to handle rigorous off-road use while improving approach and departure angles. It features a durable two-stage light texture black powder coat finish to resist corrosion and wear.

This bumper is a true bolt-on solution that requires no drilling for installation. It is designed to work seamlessly with O.E. parking sensors and does not require the relocation of the Adaptive Cruise Control (ACC) module. For recovery and lighting, it includes integrated shackle mounts, a 12,000 lbs winch capacity plate, and versatile light mounting options.

• Heavy-duty 3/16" and 1/4" steel construction
• 12,000 lbs winch capacity (compatible with most standard winches)
• Compatible with 18" single row or 20" double row LED light bars and two cube LEDs
• Maintains functionality of O.E. parking sensors
• Integrated shackle recovery mounts
• Includes both low-profile and high-profile hoops and a skid plate
• No-drill, bolt-on installation with no ACC relocation required
• MPN: FB-19534
• Warranty: 3-year finish / Limited lifetime

Fits select 2019-2024 Ram 2500 and 3500 heavy-duty trucks across all major trims including Tradesman, Laramie, and Power Wagon.

The Body Armor 4x4 Ambush XT Front Bumper is engineered for truck owners seeking a modern, low-profile look without sacrificing front-end protection. This one-piece wrap-around bumper is designed to contour precisely with the Ram's factory body lines, providing enhanced clearance for larger tires and off-road obstacles while protecting the grille and headlights. Built from heavy-duty 3/16" and 1/4" cold roll steel with 2" main tubing and 1.25" to 1.50" support tubes, it provides a rigid barrier against trail hazards. The integrated mesh screen ensures maximum airflow reaches your radiator and intercooler.

This bumper is OE sensor compatible, allowing you to maintain factory safety features, and includes a skid plate for additional underbody protection. The design features integrated mounting points for a 30" dual-row LED bar and two cube LEDs for superior visibility. For recovery and utility, it features an integrated 2" receiver and heavy-duty shackle mounts. Installation is a straightforward bolt-on process with no welding required.

• Manufacturer Part Number: DG-20339
• Construction: 3/16" and 1/4" cold roll steel
• Tubing: 2" main tube with 1.25"-1.50" support tubes
• Finish: Two-stage light texture black powder coat
• Lighting Compatibility: Fits 30" dual-row LED bar and 2 cube LEDs
• Recovery: Integrated 2" receiver and shackle recovery mounts
• Features: Includes skid plate and mesh airflow screen
• Compatibility: OE sensor compatible; non-winch design
• Warranty: 3-year finish warranty / Limited lifetime structural

Fits select 2010-2018 Dodge and Ram 2500/3500 heavy-duty trucks across all trim levels including Power Wagon, Laramie, and Tradesman.

The Body Armor 4x4 Ambush XT Front Bumper (DG-20338) provides heavy-duty protection with a sleek, low-profile aesthetic. Constructed from 3/16" and 1/4" cold-rolled steel, this one-piece wrap-around bumper is designed to shield your grille and headlights while maintaining maximum ground clearance. The center mesh screen allows for optimal airflow to the radiator and intercooler, ensuring your HD truck remains cool under load.

This bumper is highly functional for both work and trail use, featuring an integrated 2" receiver for accessories and shackle recovery mounts. For nighttime visibility, it includes mounting points for a 30" dual-row LED bar and two cube LEDs. The system is fully OE sensor compatible and includes a dedicated skid plate for lower-end protection.

• Manufacturer Part Number: DG-20338
• Material: 3/16" and 1/4" cold-rolled steel plate with 2" main tubing
• Supporting Tubes: 1.25"-1.50" diameter
• Finish: Two-stage light texture black powder coat
• Lighting Compatibility: Fits one 30" dual-row LED bar and two cube LEDs
• Installation: Easy bolt-on design with no drilling required
• Features: Integrated 2" receiver, shackle mounts, and mesh screen
• Warranty: 3-year finish / limited lifetime structural

Fits select 2015-2024 Ford Mustang models, including V6, EcoBoost, GT, Shelby GT350/GT350R/GT500, Mach 1, Bullitt, and Dark Horse.

Reduce vehicle weight and improve performance on the street, drag strip, or road course with BMR Suspension's Rear Bumper Support. Factory bumper supports are constructed from heavy stamped steel, adding unnecessary mass to the rear of your S550 or S650. The BMR BSR760R is engineered as a lightweight, high-strength alternative that trims nearly 20 lbs from your vehicle's curb weight.

This support is fabricated from 1-inch Chromoly steel tubing and 3/16-inch laser-cut steel plates. The bolt-on design ensures a straightforward installation that requires no cutting or permanent modification to your Mustang's chassis. Finished in a durable red powdercoat, it provides long-lasting corrosion resistance and a clean look.

• Direct replacement for heavy factory stamped-steel support
• Fabricated from 1-inch Chromoly steel tubing and 3/16-inch laser-cut plates
• Reduces vehicle weight by nearly 20 lbs
• 100% bolt-on design; no cutting or modification required
• Estimated installation time: 1-2 hours
• Durable red powdercoat finish
• Proudly manufactured in the USA
• Manufacturer Part Number: BSR760R

Fits select 2015-2024 Ford Mustang models, including GT, EcoBoost, V6, Shelby GT350/GT500, Mach 1, and Dark Horse.

Reduce vehicle weight and improve track performance with the BMR Suspension Rear Bumper Support. Factory rear bumper supports are manufactured from heavy stamped steel; the BMR BSR760H replaces this unit with a lightweight, high-strength alternative engineered for street performance, drag racing, and road course applications. Fabricated from 1-inch Chromoly steel tubing and 3/16-inch laser-cut plates, this support provides the structural integrity needed for the bumper cover while shaving nearly 20 lbs from the rear of the vehicle.

Installation is straightforward and 100% bolt-on, utilizing existing factory mounting points without the need for cutting or permanent modifications to your S550 or S650 chassis. Finished in a durable black hammertone powdercoat, this component is designed for long-lasting corrosion resistance and a clean look under the bodywork.

• Fits 2015-2024 Ford Mustang (All Submodels)
• Fabricated from 1-inch lightweight Chromoly steel tubing
• Heavy-duty 3/16-inch laser-cut mounting plates
• Eliminates approximately 20 lbs of factory weight
• Direct bolt-on design; no cutting or welding required
• Estimated installation time: 1-2 hours
• Manufacturer Part Number: BSR760H
• Made in the USA

Fits 2024 Ford Mustang models, including EcoBoost, GT, and Dark Horse (S650).

Optimize your vehicle's weight distribution and improve front-end performance with the BMR Suspension Front Bumper Support. Factory bumper supports are typically manufactured from heavy stamped steel, adding significant, unnecessary mass to the nose of the car. BMR's BSF771H replaces the OE unit with a lightweight design specifically engineered for drag racing and high-performance handling applications where every pound matters.

• Replaces heavy factory stamped steel bumper support
• Lightweight design reduces front-end weight for improved weight transfer
• Durable Black Hammertone powdercoat finish
• Engineered for drag racing and performance handling use
• Direct-fit replacement for S650 chassis
• Manufacturer Part Number: BSF771H

Fits 2015-2019 Ford Mustang (S550).

Engineered for weight reduction and improved front-end airflow, the BMR Suspension Front Bumper Support (BSF760R) replaces the heavy factory reinforcement bar. This tubular steel upgrade is ideal for drag racing or performance street builds where shedding front-end mass and making room for larger intercoolers or heat exchangers is critical.

• Lightweight tubular construction significantly reduces weight over the OE bumper support
• Designed to bolt directly to the factory mounting points for a clean installation
• Provides additional clearance for aftermarket forced induction cooling components
• Finished in a durable red powder coat for long-lasting corrosion resistance
• Manufactured to high tolerances for a precise fit on the S550 chassis
• Manufacturer Part Number: BSF760R

Fits 2015-2019 Ford Mustang S550 models.

Optimize your front-end weight and increase clearance for cooling upgrades with the BMR Front Bumper Support. This lightweight replacement for the bulky factory bumper beam is engineered for enthusiasts and racers who need extra room for large intercoolers or turbo piping while shedding unnecessary pounds off the nose of the car. Constructed for durability and a precise fit, it bolts directly to the factory mounting locations for a straightforward installation.

• Designed specifically for the S550 Mustang chassis to improve weight distribution and airflow.
• Finished in a durable Black Hammertone powder coat for superior corrosion resistance.
• Provides critical clearance for aftermarket forced induction and cooling components.
• Direct bolt-on design utilizes existing factory mounting points.
• Manufacturer Part Number: BSF760H

Fits 2018-2025 Jeep Wrangler JL including Sahara models.

The Artec Industries V2 Spare Tire Delete Kit (JL5627) provides a clean, streamlined look for owners looking to remove the bulky factory spare tire carrier. By shedding the weight of the spare and its mounting bracket, you reduce stress on the tailgate hinges while improving rear visibility. This V2 design is precision-engineered from lightweight aluminum to follow the specific contours of the JL tailgate for a seamless, professional appearance.

• Constructed from lightweight, corrosion-resistant aluminum
• Durable powder-coated finish for long-lasting protection
• V2 design ensures updated aesthetics and precise fitment
• Direct bolt-on installation using existing factory mounting points
• Reduces tailgate weight and improves rear-view clearance
• Manufacturer Part Number: JL5627

Fits 2018-2025 Jeep Wrangler JL models including Sahara. The Artec Industries Spare Tire Delete Kit V2 provides a clean, low-profile solution for drivers looking to remove the factory spare tire carrier from their tailgate to reduce weight or improve rearward visibility.

This kit is manufactured from bare aluminum, offering a lightweight alternative to steel plates while maintaining the structural integrity needed for a professional finish. It is designed to bolt directly into the factory mounting locations, ensuring a straightforward installation process without the need for drilling or permanent modifications. The bare aluminum finish allows for custom paint or powder coating to match your vehicle's specific build.

• Replaces the bulky factory spare tire carrier for a sleek rear aesthetic
• Constructed from high-grade bare aluminum for weight savings and durability
• V2 design ensures precise fitment on all Jeep Wrangler JL tailgates
• Bolts directly to OE mounting points with no drilling required
• Manufacturer Part Number: JL5626

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models equipped with the factory steel bumper group.

The Artec Industries Winch Plate V3 provides a heavy-duty mounting solution for recovery winches on Jeep JL and JT platforms. Engineered to integrate seamlessly with the factory steel bumper, this winch plate is built from high-strength steel to withstand the extreme loads encountered during off-road recovery. The V3 design optimizes winch positioning for better clearance and airflow while maintaining a low-profile aesthetic that complements the OE bumper lines.

• Specifically designed for the factory steel bumper group
• Precision-engineered steel construction for maximum durability
• Bolt-on installation using factory mounting points
• Compatible with most standard recovery winches
• Maintains structural integrity during high-stress extractions
• Manufacturer Part Number: JL5611

Fits 2007-2018 Jeep Wrangler JK (2-Door & 4-Door models).

The Artec Industries Spare Tire Delete Kit (JK1112) provides a professional, finished look for owners who have relocated their spare or are looking to shed weight and improve rear visibility. This kit replaces the bulky factory tire carrier with a sleek, low-profile plate that covers the venting and mounting holes in the tailgate.

Constructed from lightweight yet durable aluminum, this delete kit is designed to withstand the elements and the vibrations of off-road travel. The powdercoated finish adds a layer of corrosion protection while maintaining a clean aesthetic that complements the JK body lines. This plate bolts directly to the factory mounting points for a simple and secure installation.

• Material: Lightweight aluminum construction
• Finish: Durable powdercoat for long-term corrosion resistance
• Fitment: 2007-2018 Jeep Wrangler JK/JKU
• Installation: Reuses factory tailgate mounting locations
• Manufacturer Part Number: JK1112

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT models.

The Artec Industries High Clearance Comp Front Bumper with Hoop Guard (JJ8022) is engineered for off-roaders who prioritize maximum approach angles and front-end protection. This competition-inspired "stubby" bumper is designed to keep the front tires clear of obstructions, allowing for better articulation and clearance on technical trails and rock crawls.

• High-clearance competition design optimized for extreme approach angles
• Integrated hoop guard for added grille and winch protection
• Heavy-duty construction designed to withstand rigorous off-road use
• Direct fitment for Jeep Wrangler JL and Gladiator JT platforms
• Precision-engineered for reliable performance and trail durability
• Manufacturer Part Number: JJ8022

The ARB LED Indicator and Clearance Lamp Kit (6821287) provides a high-visibility, long-lasting lighting solution specifically engineered for ARB bumper systems. This dual-function lamp kit replaces or upgrades standard lighting to provide both turn signal (indicator) and parking (clearance) functionality in a single, rugged assembly.

Designed to withstand the rigors of off-road use, these LEDs offer superior vibration resistance and a significantly longer service life compared to traditional incandescent bulbs. The kit is designed for a precise fit within the light pockets of ARB Deluxe, Sahara, and Commercial bumpers, ensuring a clean, professional installation that maintains the specialized aesthetic of your vehicle's armor.

• Product Type: LED Combination Indicator and Clearance Lamp Kit
• Function: Integrated turn signal and marker/parking light
• Compatibility: Fits select ARB Deluxe, Sahara, and Commercial bumpers
• Technology: High-output, vibration-resistant LEDs for increased reliability
• Hardware: Includes necessary wiring components for installation
• Manufacturer Part Number: 6821287

Fits select 2024-2025 Toyota Tacoma SR, SR5, Limited, Trailhunter, TRD Off-Road, TRD Pro, and TRD Sport models.

The ARB Bumper Fitting Kit 3423210 is a vehicle-specific mounting solution required to securely attach an ARB bumper to the truck's chassis. This kit is precision-engineered to maintain the integrity of the vehicle's safety systems, ensuring that bumper installation does not interfere with factory airbag deployment sensors or structural crumple zones.

• Vehicle-specific design ensures precise alignment with the 2024-2025 Toyota Tacoma chassis
• Engineered to integrate seamlessly with factory safety systems and airbag sensors
• Comprehensive kit includes all necessary heavy-duty mounting hardware
• Durable finish for corrosion resistance in harsh off-road environments
• Manufacturer Part Number: 6178463
• ARB Fitting Kit Number: 3423210

Fits 2018-2019 Jeep Wrangler Rubicon, Sport, Sahara, and Unlimited models (JL).

The ARB License Plate Relocation Kit is an essential accessory for Jeep Wrangler JL owners installing ARB rear bumpers. When upgrading to high-clearance or heavy-duty rear barwork, the factory license plate mounting position often becomes obstructed or is removed entirely. This kit provides a secure, durable mounting solution that relocates the plate to a visible location while maintaining legal compliance with an included illumination light.

• Designed specifically for use with ARB Rear Bumpers
• Includes heavy-duty mounting bracket and integrated license plate light
• Compatible with 2-door and 4-door Wrangler JL models
• Ensures registration plate visibility and illumination
• Manufacturer Part Number: 5750390

Fits 1990-2016 Toyota Land Cruiser and Lexus LX450/LX470 models equipped with an ARB Rear Bumper system.

The ARB Hi-Lift Jack Mounting Bracket provides a secure and accessible recovery point for your off-road adventures. Designed to bolt directly onto the swing-out spare tire carrier of an ARB Rear Bumper system, this bracket moves your heavy jack from the interior to the exterior, saving cargo space and ensuring the tool is ready when you need it most. This bracket is engineered for high-vibration environments, maintaining a rigid hold on the jack even over corrugated terrain.

• Specifically designed for ARB Rear Bumper systems with spare tire carriers
• Direct fit for ARB wheel carrier part numbers 5700251 and 5700252
• Required for mounting Hi-Lift jacks to ARB rear carrier setups
• Durable finish to match ARB bumper systems
• Manufacturer Part Number: 5700060

Vehicle Fitment:

Fits 2021-2025 Ford Bronco models equipped with wide fender flares. This comprehensive ARB rear bumper bundle (MPN 5680010B) provides a significant upgrade in protection and recovery capability while maintaining factory utility.

Engineered for off-road durability, the bumper is constructed from high-strength steel and features a multi-stage finish: a zinc-rich primer for corrosion resistance followed by an Integrit textured black powder coat. The design incorporates two chassis-mounted, rated recovery points and twin jack points in the outer wings compatible with the ARB Jack or standard mechanical jacks.

• OE Integration: Designed to retain the factory tow bar, wiring, and rear parking sensors.
• Visibility & Legal: Includes a license plate relocation kit for the spare wheel and an LED license plate light.
• Aesthetic Finish: Features a vintage silver center panel that houses the central sensors and OE tow bar.
• Vehicle Specific: Precision-engineered for Ford Bronco models with wide fender flares to ensure proper body lines and clearance.

The bundle includes the ARB rear bumper and the necessary fitting kit for a complete installation to factory mounting points.

Fits 2021-2025 Ford Bronco models equipped with wide fender flares.

Engineered for maximum protection and off-road utility, the ARB Rear Bumper for the Ford Bronco integrates seamlessly with factory systems while providing robust recovery options. Constructed from durable steel with a zinc-rich primer for corrosion resistance and finished in Integrit textured black powder coat, this bumper is built to withstand harsh trail conditions. It features twin chassis-mounted rated recovery points and dual jack points compatible with the ARB Jack or standard mechanical jacks. The design retains the OE tow bar and wiring, and includes a vintage silver center panel that houses factory parking sensors.

• Compatible with 2021-2025 Ford Bronco (Wide Body/Wide Fender Flares)
• Durable steel construction with zinc-rich primer and Integrit textured black finish
• Twin chassis-mounted rated recovery points and integrated jack points in outer wings
• Retains factory tow bar, wiring, and rear parking sensor functionality
• Includes LED license plate light and relocation kit for spare wheel mounting
• Note: Installation requires a vehicle-specific fit kit (sold separately)
• Manufacturer Part Number: 5680010

Fits 1987-2006 Jeep Wrangler (YJ and TJ) including Base, Sport, Sahara, Rubicon, and Unlimited models.

The ARB Summit Rear Bumper (5650310) delivers a high-clearance protection solution engineered for demanding off-road environments. Built around a robust tubular steel subframe and finished in a durable textured black powder coat, this bumper is designed to maximize departure angles while providing a 1588kg towing capacity. The center recess accommodates oversized tires, ensuring the bumper remains functional even with significant vehicle modifications.

• Heavy-Duty Construction: Manufactured from high-strength steel with a vehicle-specific design for optimal fitment.
• Integrated Recovery Points: Four dedicated ARB Jack and Hi-Lift jack points are easily accessible for trail-side recoveries.
• Advanced Connectivity: Includes provisions for an ARB air compressor, trailer camera wiring, a 50-amp Anderson plug, and trailer plug wiring.
• Towing Capability: Integrated tow hitch rated for up to 1588kg.
• Finish: Textured black powder coat for superior corrosion and scratch resistance.
• Manufacturer Part Number: 5650310