Fits 2008-2014 Subaru WRX and STI.

The PERRIN Front Mount Intercooler Bumper Beam is an essential component for enthusiasts installing a front-mount intercooler (FMIC) system on the GR/GV chassis. This beam is engineered to replace the bulky factory crash beam, providing the critical clearance required to fit large intercooler cores behind the front fascia without compromising the mounting points for the bumper cover.

• Specifically designed to accommodate front mount intercooler upgrades
• Provides necessary clearance for oversized cores while supporting the front bumper
• Durable black finish for a discreet look and corrosion resistance
• Direct fitment for 2008-2014 Subaru WRX and STI models
• Manufacturer Part Number: PSP-ITR-428

Fits 2015-2021 Subaru WRX and STI.

The PERRIN Front Mount Intercooler (FMIC) Bumper Beam is a purpose-built replacement for the factory support structure, designed specifically to accommodate the installation of large intercooler cores. On 2015-2021 Subaru WRX and STI models, the OEM bumper beam often interferes with the placement of high-performance front mount kits; this PERRIN beam provides the necessary clearance while maintaining critical mounting points.

• Designed specifically for front mount intercooler (FMIC) clearance
• Fits 2015-2021 Subaru WRX and STI models
• Durable black finish for a clean, stealthy look behind the bumper cover
• Direct replacement part engineered for specific vehicle chassis fitment
• Manufacturer Part Number: PSP-ITR-440

Fits 2002-2007 Subaru WRX and STI.

The PERRIN Front Mount Intercooler (FMIC) Bumper Beam is a purpose-built component designed to provide the necessary clearance for large aftermarket intercooler cores on the GD-chassis Subaru. When upgrading to an FMIC, the factory bumper beam typically interferes with the core and piping; this PERRIN replacement (PSP-ITR-401) allows for a proper fitment while maintaining structural support for your front bumper cover.

• Engineered specifically to accommodate front mount intercooler upgrades
• Constructed for durability with a corrosion-resistant black powder-coated finish
• Maintains critical mounting points for the front bumper fascia
• Direct replacement for the factory front beam during intercooler installation
• Manufacturer Part Number: PSP-ITR-401

Fits select 2015-2024 Ford Mustang models, including V6, EcoBoost, GT, Shelby GT350/GT350R/GT500, Mach 1, Bullitt, and Dark Horse.

Reduce vehicle weight and improve performance on the street, drag strip, or road course with BMR Suspension's Rear Bumper Support. Factory bumper supports are constructed from heavy stamped steel, adding unnecessary mass to the rear of your S550 or S650. The BMR BSR760R is engineered as a lightweight, high-strength alternative that trims nearly 20 lbs from your vehicle's curb weight.

This support is fabricated from 1-inch Chromoly steel tubing and 3/16-inch laser-cut steel plates. The bolt-on design ensures a straightforward installation that requires no cutting or permanent modification to your Mustang's chassis. Finished in a durable red powdercoat, it provides long-lasting corrosion resistance and a clean look.

• Direct replacement for heavy factory stamped-steel support
• Fabricated from 1-inch Chromoly steel tubing and 3/16-inch laser-cut plates
• Reduces vehicle weight by nearly 20 lbs
• 100% bolt-on design; no cutting or modification required
• Estimated installation time: 1-2 hours
• Durable red powdercoat finish
• Proudly manufactured in the USA
• Manufacturer Part Number: BSR760R

Fits select 2015-2024 Ford Mustang models, including GT, EcoBoost, V6, Shelby GT350/GT500, Mach 1, and Dark Horse.

Reduce vehicle weight and improve track performance with the BMR Suspension Rear Bumper Support. Factory rear bumper supports are manufactured from heavy stamped steel; the BMR BSR760H replaces this unit with a lightweight, high-strength alternative engineered for street performance, drag racing, and road course applications. Fabricated from 1-inch Chromoly steel tubing and 3/16-inch laser-cut plates, this support provides the structural integrity needed for the bumper cover while shaving nearly 20 lbs from the rear of the vehicle.

Installation is straightforward and 100% bolt-on, utilizing existing factory mounting points without the need for cutting or permanent modifications to your S550 or S650 chassis. Finished in a durable black hammertone powdercoat, this component is designed for long-lasting corrosion resistance and a clean look under the bodywork.

• Fits 2015-2024 Ford Mustang (All Submodels)
• Fabricated from 1-inch lightweight Chromoly steel tubing
• Heavy-duty 3/16-inch laser-cut mounting plates
• Eliminates approximately 20 lbs of factory weight
• Direct bolt-on design; no cutting or welding required
• Estimated installation time: 1-2 hours
• Manufacturer Part Number: BSR760H
• Made in the USA

Fits 2024 Ford Mustang models, including EcoBoost, GT, and Dark Horse (S650).

Optimize your vehicle's weight distribution and improve front-end performance with the BMR Suspension Front Bumper Support. Factory bumper supports are typically manufactured from heavy stamped steel, adding significant, unnecessary mass to the nose of the car. BMR's BSF771H replaces the OE unit with a lightweight design specifically engineered for drag racing and high-performance handling applications where every pound matters.

• Replaces heavy factory stamped steel bumper support
• Lightweight design reduces front-end weight for improved weight transfer
• Durable Black Hammertone powdercoat finish
• Engineered for drag racing and performance handling use
• Direct-fit replacement for S650 chassis
• Manufacturer Part Number: BSF771H

Fits 2015-2019 Ford Mustang (S550).

Engineered for weight reduction and improved front-end airflow, the BMR Suspension Front Bumper Support (BSF760R) replaces the heavy factory reinforcement bar. This tubular steel upgrade is ideal for drag racing or performance street builds where shedding front-end mass and making room for larger intercoolers or heat exchangers is critical.

• Lightweight tubular construction significantly reduces weight over the OE bumper support
• Designed to bolt directly to the factory mounting points for a clean installation
• Provides additional clearance for aftermarket forced induction cooling components
• Finished in a durable red powder coat for long-lasting corrosion resistance
• Manufactured to high tolerances for a precise fit on the S550 chassis
• Manufacturer Part Number: BSF760R

Fits 2015-2019 Ford Mustang S550 models.

Optimize your front-end weight and increase clearance for cooling upgrades with the BMR Front Bumper Support. This lightweight replacement for the bulky factory bumper beam is engineered for enthusiasts and racers who need extra room for large intercoolers or turbo piping while shedding unnecessary pounds off the nose of the car. Constructed for durability and a precise fit, it bolts directly to the factory mounting locations for a straightforward installation.

• Designed specifically for the S550 Mustang chassis to improve weight distribution and airflow.
• Finished in a durable Black Hammertone powder coat for superior corrosion resistance.
• Provides critical clearance for aftermarket forced induction and cooling components.
• Direct bolt-on design utilizes existing factory mounting points.
• Manufacturer Part Number: BSF760H

Fits 2021-2025 Ford Bronco and Bronco Raptor models. This Frame Horn Gusset Kit is engineered to reinforce the 6th Gen Bronco's factory frame horn mounts, which are prone to bending or damage during winch recoveries and heavy-duty towing. By bracing these high-stress points, you can utilize factory or aftermarket winch-capable bumpers with greater confidence.

Constructed from heavy-duty 1018 steel, this kit is finished in a dual-stage hammer black powder coat for superior corrosion resistance. The installation is fully bolt-on and includes high-strength Grade 8 hardware to ensure a secure, rigid connection to the vehicle chassis. Proudly made in the USA.

• Reinforces failure-prone OEM frame horn mounts
• Precision-cut 1018 steel construction
• Dual-stage hammer black powder coat finish
• Heavy-duty Grade 8 installation hardware included
• Designed for use with winch-capable or recovery-integrated bumpers
• Fully bolt-on installation; no welding required
• Manufacturer Part Number: AC2303701NA