This Part Fits:

This Part Fits:

This Part Fits:

The Injen Technology exhaust system for the Jeep Gladiator features full 3" mandrel bent 304 stainless steel tubing that provides optimal pipe routing for maximum flow and additional clearance for extreme off-road use. That 3" piping flows directly into our Injen oval muffler that was designed specifically for the new Jeep powerplants. Our Jeep specific muffler is shallow in height to provide increased ground clearance, all while having the correct interior volume and design to tame the exhaust note of the mighty Jeep Gladiator. Delivering a smooth, deep tone that is distinct to the Injen exhaust line, this system provides you with all dyno-proven performance you crave and the sound enhancements that you demand.

• Features Injen's low-profile oval muffler to deliver a clean, crisp, distinctively Injen sound
• If you're looking to improve sound, power, and looks then this is the system for you!
• Exhaust exits at the OE location for endless bumper and suspension options
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
• Pairs perfectly with our cold air intake EVO5005 and EVO5005C
• Unique Muffler Designed Specifically for the Jeep JK/JL/JT
• Injen's legendary Single exit, high-tuck, cat-back design
• Dyno Proven gains of up to 5 hp and 5 lb-ft. of torque
• Show Quality Embossed Stainless Steel Muffler
• Premium Stainless Steel Hardware and Hangers
• Designed And Made In Pomona; CA
• Designed and Made in Pomona, CA
• No Cutting or Welding Required

This Part Fits:

The legendary Toyota Supra has returned for 2020! A legend only deserves the best and the Injen Race Series Cat-Back Single-Exit Exhaust System Delivers! Specifically engineered for the 2020-2023 Toyota GR Supra equipped with the L6-3.0L Turbo, this system was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty sedans. Our race inspired single-exit design hones the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you're pushing the limits.

• NOTE: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.
• Race Exhaust design that eliminates all factory mufflers, resonators, and valves for race inspired weight reduction and sound
• No-tip racing design that utilizes oversized 3.50in tubing the entire length of the exhaust
• Dyno Proven power increase of 10 HP and 11 Lb.-Ft. of torque at the wheels
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• A savings of over 20lbs when compared to the stock exhaust system!
• Beautiful V-Band clamps used for a simple, leak-free installation
• Manufactured from huge, mandrel-bent, 304 stainless-steel tubing
• Uses all factory mounting locations with factory-style hangers
• Includes all necessary hardware for a hassle-free installation
• Increase Throttle Response and Decreases Turbo Lag
• Designed and manufactured in Pomona, CA
• Race-Inspired single exit design
• Emissions

This Part Fits:

We design every performance product with ease of installation in mind and this exhaust is no different. On the SES2300CF we've included V-Band clamps and flanges for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation. The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a stepped piping design that keeps the flow rate consistent throughout the length of the exhaust. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the rev range.

• Emissions: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#.
• Integrated exhaust valve for normal (quiet) and sport mode (race inspired sound) operation
• Injen's dual oval, straight-through mufflers for exceptional sound and power output
• Oversized tubing reduces restriction providing increased airflow and performance
• Custom investment cast Y-Pipe equalizes flow for improved performance and sound
• Dyno Proven power increase of 11 HP and 9 Lb.-Ft. of torque at the wheels
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Beautiful V-Band clamps used for a simple, leak-free installation
• Manufactured from huge, mandrel-bent, 304 stainless-steel tubing
• Performance Stepped design for maximum performance and velocity
• Uses all factory mounting locations with factory-style hangers
• Includes all necessary hardware for a hassle-free installation
• Front and mid-section utilizing massive 3.50in (89mm) tubing
• Dual 4.5in (114mm) bolt-on Carbon Fiber Exhaust Tips
• Increase Throttle Response and Decreases Turbo Lag
• Rear section utilizes huge 3.00in (76mm) tubing
• Exhaust Valve uses factory motor: not included
• Designed and manufactured in Pomona, CA

This Part Fits:

The Injen Technology engineers are experts when it comes to performance, PERIOD. From Cars to Trucks to Powersports, Injen has a variety of exhaust systems to choose from. All of Injen Technology Performance exhaust systems are constructed from mandrel bent stainless steel tubing Mandrel-bending ensures the tubing maintains its shapes and size throughout the entire length, providing smooth, unrestricted airflow. From the Investment cast flanges to the custom hangers, all Injen exhaust systems are 100% TIG welded and handcrafted in the USA and include all tubing, mufflers, and hardware necessary for a hassle free installation. Each system is uniquely designed to offer an aggressive sound that brings out some massive power. Like all other Injen products, the Injen exhaust systems are proudly built in Pomona, CA.

• Features Injen's dual JDM Style round mufflers to deliver a clean, crisp, distinctively Injen sound
• If you're looking to improve sound, power, and looks then this is the system for you!
• Fits RWD Coupe Models Only. Excludes G37X AWD and Rear Active Steering models
• Injen's fully functional upstream resonator with integrated internal X-Pipe
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• True dual exhaust made from premium 60MM 304 SS Mandrel-Bent Tubing
• Stainless Steel Investment Cast Flange for a Fast and Easy Install
• Premium Stainless Steel Hardware and Hangers for a simple install
• Injen's legendary Full Performance Cat-Back exhaust system
• Dyno Proven gains of up to 14 hp and 16 lb-ft. of torque
• Resonated Titanium Dual Wall Rolled-Burnt Tips
• Beautiful dual 4.5"titanium exhaust tips
• Designed and Manufactured in Pomona, CA
• No Cutting or Welding Required

This Part Fits:

Pump up the volume in that Sentra of yours, exhaust volume that is! The Injen Sentra exhaust has an overall diameter of 60mm to provide you with a subdued yet aggressive exhaust note. That 1.6L turbo under the hood of your Sentra will thank you, for letting it be heard. The SES1971 Cat-back exhaust system will help beef up the exhaust tone but still helps to pull the sound back a bit to prevent drone when at cruising speed. Our 2017 Nissan(R) Sentra exhaust is constructed completely of mandrel-bent 304 stainless steel, for smooth exhaust flow and maximum durability. You won't have to worry about this exhaust rusting out and plaguing your system with exhaust leaks. The Injen Sentra Cat-back exhaust provides a clean look, is finished off with a 3.5" single wall rolled polished tip. Installation can be accomplished in under one hour to get your Sentra back on the road in no time. Combine this Cat-back exhaust with our Sentra cold air intake for a complete performance package. The Injen Limited Lifetime Warranty guarantees precision craftsmanship, to keep your Sentra looking and sounding good.

• Features Injen's 12in Long resonator to deliver a clean, crisp, distinctively Injen sound
• If you're looking to improve sound, power, and looks then this is the system for you!
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Stainless Steel Investment Cast Flange for a Fast and Easy Install
• Premium Stainless Steel Hardware and Hangers for a simple install
• Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
• Dyno Proven gains of up to 14 hp and 12 lb-ft. of torque
• Backed By Injens Limited Lifetime Warranty
• Full Performance Cat-Back exhaust system
• Designed and Manufactured in Pomona, CA
• Does NOT work with SES1971AB Axle Back
• Beautiful 4.0"polished exhaust tip
• No Cutting or Welding Required

This Part Fits:

So you have that new 2016-2021 Honda Civic Sedan with the 1.5L Turbo and now you crave that extra punch in sound and performance. Well, the team at Injen Technology has you covered. This aggressively designed cat-back exhaust system features a large 76mm 304 stainless steel front section that Y's into dual 60mm rear pipes that are each capped with 3.50"burnt titanium exhaust tips. This beautiful cat-back exhaust system is designed specifically for the Honda Civic Sedan to deliver improved performance that you can hear and feel. It doesn't matter if you're hitting the track or commuting to work, this dual exhaust system by Injen Technology will give you the power you need to tackle anything thrown at you. This dual titanium tip exhaust system for your Honda Civic Sedan 1.5L is constructed from mandrel bent 304 stainless steel tubing designed for a lifetime of use. By using Mandrel-bent tubing, Injen Technology ensures the tubing maintains its shape and size throughout the entire length, providing smooth, unrestricted airflow. To go the extra step, the team at Injen Technology TIG welded this system by hand for a beautiful system that is hassle free to install. If you're looking to improve sound, increased performance, and looks that turn heads, then this is the system for you!

• If you're looking to improve sound, power, and looks then this is the system for you!
• Beautiful 3.50"Dual Burnt Titanium exhaust tips for that classic JDM look
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Stainless Steel Investment Cast Flange for a Fast and Easy Install
• Single resonator, no muffler design for a distinct exhaust note
• 76mm front section with dual 60mm rear cat-back exhaust system
• Stainless Steel Hardware and Hangers for a simple install
• Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
• Premium 304 SS Mandrel-Bent Tubing used throughout
• 76mm Stainless Steel Full Cat-Back System
• Does not fit Coupe and Hatchback models
• Designed and Made in Pomona, CA
• No Cutting or Welding Required

This Part Fits: