Fits 2013-2018 Ford Focus ST models.

The AWE Track Edition Cat-Back Exhaust is the most aggressive acoustic option for the Focus ST, designed for drivers who prioritize a raw, uncensored exhaust note. This system maintains the same 3-inch diameter precision engineering as the Touring Edition but omits AWE’s proprietary 180 Technology® drone-canceling resonators. The result is a lightweight, straight-through design that maximizes flow and delivers a significant volume increase in the mid-range. Due to its high-volume nature, this system is recommended for those who want an uncompromised soundtrack.

Constructed from handcrafted, U.S.-sourced .065-inch wall T304L stainless steel, the Track Edition ensures long-term durability and resistance to corrosion. The system concludes with dual 4-inch slash-cut, double-walled tips in a Diamond Black finish. Each tip is individually adjustable, allowing you to set the protrusion depth from the rear bumper to your specific preference. This direct bolt-on kit replaces the factory exhaust with no cutting or welding required.

• Direct bolt-on fitment for factory-like installation
• Full 3-inch diameter U.S.-sourced T304L stainless steel construction
• Max gains of 7 hp and 12 lb-ft of torque at the crank
• Dual 4-inch adjustable double-walled tips in Diamond Black
• Clean, non-baffled, straight-through design for maximum flow
• No Check Engine Light (CEL) guarantee
• AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3020-33036

Fits 2011-2026 Dodge Durango models including Citadel, Crew, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, and Special Service (5.7L / 3.6L).

The AWE Track Edition Cat-Back Exhaust is engineered for Durango owners who want an aggressive, unfiltered V8 or V6 sound. This system replaces the restrictive factory exhaust with a straight-through design featuring dual 3-inch CNC mandrel-bent T304L stainless steel piping. It begins with a bespoke resonated H-pipe to provide a deep, rich tone while minimizing rasp, followed by mid-pipe bullet resonators. As the Track Edition removes the final mufflers, it delivers a significant increase in volume during mid-range acceleration and deceleration.

This exhaust is a direct bolt-on replacement that utilizes factory mounting points. It not only improves the auditory profile but also enhances performance with dyno-proven gains and substantial weight reduction compared to the stock assembly. Each system is handcrafted in the USA from U.S.-sourced .065-inch wall stainless steel to ensure long-term durability and resistance to corrosion.

• Manufacturer Part Number: 3020-32575
• Direct bolt-on cat-back configuration with dual 3-inch piping
• Dyno-proven max gains of +13 hp and +8 lb-ft of torque at the wheels
• Dual 5-inch double-walled, slash-cut tips in Chrome Silver finish
• Weight: 55.5 lbs (approx. 20 lbs lighter than factory exhaust)
• Handcrafted from U.S.-made .065-inch wall T304L stainless steel
• Bespoke resonated H-pipe design for deep tone
• 50-state emissions legal
• AWE No Check Engine Light (CEL) Guarantee
• AWE Lifetime Warranty

Fits 2023-2024 Toyota GR Corolla models.

Elevate the performance and acoustic profile of your G16E-GTS powered hatchback with the REMARK Elite Spec Full Titanium Quad Tip Cat-Back Exhaust. Engineered specifically for the GR Corolla chassis, this system replaces the restrictive factory exhaust with high-grade titanium piping, significantly reducing vehicle weight while optimizing exhaust gas flow. The Elite Spec tuning provides a sophisticated, aggressive tone that remains refined during daily driving.

• Full titanium construction for maximum weight savings and superior corrosion resistance
• Precision TIG-welded seams for long-term structural integrity
• Quad-tip exit configuration designed to perfectly fit the factory rear valance
• Direct bolt-on installation utilizing OEM mounting locations
• Manufacturer Part Number: RK-C4076T-05T

Fits 2013-2015 Toyota Tacoma Base, Pre Runner, TRD Pro, and X-Runner models (V6-4.0L).

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17147 is engineered to maximize ground clearance and deliver a deep, signature exhaust note. This weight-optimized system features a high-clearance turn-down exit located before the rear axle, specifically designed to stay clear of obstacles during technical off-roading where traditional rear-exit tailpipes are vulnerable to damage.

Constructed from 100% corrosion-resistant stainless steel, this system utilizes 2.5-inch CNC mandrel-bent tubing to maintain consistent flow and a straight-through muffler for a very aggressive exterior sound profile. Extensive 3D scanning ensures a precise direct-fit design for a bolt-on installation that replaces all factory components from the catalytic converter back.

• System Type: Cat-Back
• Series: Off-Road Pro Series
• Tubing Diameter: 2.5 in.
• Exit Style: Turn Down Before Rear Axle
• Muffler Quantity: 1
• Muffler Type: Straight-Through
• Material: Stainless Steel
• Tip Diameter: 3 in. Satin Single Wall Cut Edge
• Installation: Bolt-On; No Welding Required
• Manufacturer Part Number: 17147

Fits Suzuki Jimny JA12W and JA22W models equipped with F6A or K6A engines.

The HKS Hi-Power 409 exhaust system is engineered to reduce backpressure and optimize exhaust flow while providing the signature deep, sporty HKS tone. Designed specifically for the turbocharged Jimny, this system utilizes SUH409 stainless steel for the piping to ensure long-term durability and heat resistance, while the muffler shell and tip are constructed from high-luster SUS304 stainless steel for a premium look and corrosion resistance.

• Manufacturer Part Number: 31006-AS010
• Series: Hi-Power 409
• Chassis Compatibility: JA12W, JA22W
• Engine Fitment: F6A (Turbo), K6A (Turbo)
• Piping Material: SUH409 Stainless Steel
• Shell and Tip Material: SUS304 Stainless Steel
• Direct bolt-on installation to factory mounting points

Fits 2021+ Cadillac Escalade models (6.2L).

The AWE Tuning 0FG Exhaust System is a high-performance cat-back solution designed specifically for the 6.2L Cadillac Escalade. Engineered to provide a deep, aggressive V8 exhaust note while maintaining cabin comfort, this system features AWE’s signature 0FG technology for maximum flow and sound quality. The dual-exit design is constructed from CNC mandrel-bent T304L stainless steel to ensure durability and precise fitment. The system is completed by a pair of massive 5-inch Diamond Black tips, providing a significant aesthetic upgrade over the factory exhaust outlets.

• Direct bolt-on installation replaces factory exhaust components
• Dual exit configuration with precision-fit 5-inch Diamond Black tips
• Constructed from T304L stainless steel for superior corrosion resistance
• Engineered for the 6.2L V8 powertrain
• Manufacturer Part Number: 3015-43321

Fits 2021+ Cadillac Escalade (6.2L).

The AWE Tuning 0FG Dual Exit Exhaust System is a high-performance exhaust solution specifically engineered for the 6.2L Cadillac Escalade. This system provides a refined yet aggressive acoustic profile that complements the vehicle's V8 powerplant. Designed for enthusiasts who want a sound upgrade without altering the external appearance of the vehicle, this 0FG setup is engineered to reuse the factory OE exhaust tips for a perfect integrated fit within the rear valance.

• Series: AWE Tuning 0FG Dual Exit
• Engine Fitment: 6.2L V8
• Configuration: Dual Exit System
• Installation: Reuses original equipment (OE) exhaust tips
• Fitment: Direct bolt-on for 2021+ Cadillac Escalade models
• Manufacturer Part Number: 3015-31321

Fits 2019-2024 Porsche 911 Carrera, Carrera 4, Carrera 4S, and Carrera S (3.0L). This APR catback exhaust system provides a direct plug-and-play upgrade for both base and Porsche Sport Exhaust (PSE) equipped 992.1 models.

Engineered to optimize exhaust velocity for turbocharged engines, this system features dual-path routing with 3-inch valved paths and 2-inch non-valved paths. The valved sections utilize cast T304 stainless steel housings that integrate seamlessly with the factory ECU valve actuation, allowing for a civilized tone at cruise and a free-flowing, aggressive note at wide-open throttle. Constructed entirely from brushed T304 stainless steel, the system employs CNC mandrel-bent tubing and TIG welding for maximum durability and precision fitment.

Weight reduction is a primary benefit; at just 17 lbs, the APR system is 10 lbs lighter (37% reduction) than the factory Porsche Sport Exhaust. The design includes a drone-eliminating muffler and utilizes CNC-bent, laser-cut brackets that bolt to factory mounting points for a simple, two-clamp installation.

• Material: Brushed T304 stainless steel
• Weight: 17 lbs (10 lbs lighter than PSE)
• Valved Path: 3.0-inch (19% larger cross-section than stock)
• Non-Valved Path: 2.0-inch (66% larger cross-section than stock)
• Installation: Single-piece design with 2 clamps and 2 mounting features
• Valve Actuation: Factory ECU controlled via cast housings
• Emissions Status: Emissions compliant
• Manufacturer Part Number: CBK0054

Fits 2022-2026 Audi RS3 Base models.

The APR Catback Exhaust System (CBK0053) is a precision-engineered upgrade designed to enhance the acoustic profile and exhaust flow of the Audi RS3 8Y. Constructed from high-grade T304 stainless steel with full TIG welding, this system features dual 63.5mm (2.5") mandrel-bent tubing that transitions into a quad-exit configuration. The straight-through, brushed-finish mufflers are designed to deliver a deep, refined growl while eliminating drone and restriction.

This system integrates seamlessly with the factory electronics using cast valve housings that accommodate the original equipment manufacturer (OEM) electronic valve actuators. This allows for full retention of variable sound levels through the factory drive modes. The low-profile design ensures adequate ground clearance for lowered vehicles, while rugged brackets and OEM-style slip clamps provide a secure, plug-and-play installation into the factory bumper-integrated tips.

• Manufacturer Part Number: CBK0053
• Material: Hand-crafted T304 stainless steel
• Tubing: Dual 63.5mm mandrel-bent tubing with quad 63.5mm outlets
• Finish: Brushed tubing and mufflers
• Valving: Dual cast valve housings for OEM actuator retention
• Installation: Bolt-on design with OEM-style slip clamps
• Compatibility: Compatible with factory RS bumper exhaust tips

Fits 2022-2026 Volkswagen Golf R models, including Base, 20th Anniversary Edition, and Black Edition.

The APR Cat-Back Exhaust System (CBK0052) is engineered to provide an aggressive exhaust note under load while maintaining a drone-free, civilized experience during daily operation. Constructed entirely from brushed T304 stainless steel, this system features 3-inch (76mm) mandrel-bent main tubing that splits into quad 2.5-inch (63.5mm) exits. The design utilizes dual Helmholtz drone-elimination resonators and integrates with the factory OEM-controlled valves to retain full functionality and sound profile control.

Performance is optimized through an unrestrictive straight-through design that significantly outperforms the factory 50mm narrowing. Users can expect peak gains of approximately 5 AWHP and 4 FT-LBS of torque at the wheels along with improved turbocharger response. Installation is a bolt-on procedure using the included low-profile butt clamps and precision-engineered bracketry, requiring no cutting to the factory system.

• Brushed T304 stainless steel construction for maximum corrosion resistance
• Unrestrictive 3" (76mm) main tubing to quad 2.5" (63.5mm) exit design
• Quad 5.2x3.9" (131mm x 99mm) matte carbon fiber tips with stainless steel inlays
• Dual Helmholtz resonators for drone-free cruising
• Retains factory exhaust valve control functionality
• Precision TIG welding and T304 bracketry for perfect fitment
• Direct bolt-on installation with no cutting required
• Manufacturer Part Number: CBK0052

Fits 2022-2026 Volkswagen GTI models including 40th Anniversary Edition, Autobahn, S, and SE.

The APR Catback Exhaust System (CBK0047) provides a significant upgrade to your vehicle's acoustics and exhaust flow. Hand-crafted from T304 stainless steel with precision TIG welding, this system features 3-inch (76mm) mandrel-bent tubing that transitions into dual 2.5-inch (63.5mm) exit pipes. The straight-through, brushed-finish mufflers and integrated Helmholtz resonator work together to deliver a deep growl while effectively eliminating cabin drone.

Designed for a precise fit even on lowered vehicles, this system offers a 60% increase in piping cross-sectional area over the factory exhaust while weighing 9% less than stock. Installation is straightforward using the included rugged mounting brackets and OEM-style slip clamps, providing a plug-and-play solution that mounts to factory locations.

• Manufacturer Part Number: CBK0047
• T304 stainless steel construction with brushed finish
• 3" (76mm) primary tubing to dual 2.5" (63.5mm) exits
• Removable 4" (102mm) polished slash-cut exhaust tips
• Drone-eliminating Helmholtz resonator
• Mandrel-bent paths for maximum flow velocity
• 9% weight reduction compared to factory OE system
• TIG-welded joints and OEM-style slip clamps included

Fits 2017-2020 Audi RS3 Base models.

The APR Catback Exhaust System (CBK0041) is a premium upgrade designed to enhance the acoustic profile and exhaust flow of the Audi RS3 8V. Hand-crafted from T304 stainless steel, this system utilizes dual 63.5mm (2.5-inch) mandrel-bent tubing to provide a smooth, unrestricted path for exhaust gases. The straight-through, brushed-finish mufflers are engineered to deliver a deep growl while eliminating rasp, maintaining a sophisticated tone throughout the RPM range.

Designed for seamless integration, this system features cast valve housings that retain the factory electronic valve actuators, allowing for continued use of OEM valve operation for variable sound levels. The assembly is secured with rugged mounting brackets and OEM-style slip clamps for a precise, rattle-free fit. It is finished with distinctive 170x112mm ovalized diamond black tips that complement the RS aesthetic.

• T304 stainless steel construction with argon back-purged TIG welding
• Dual 63.5mm mandrel-bent tubing with quad outlets
• Low-profile design compatible with lowered vehicles
• Retains factory electronic valve control for variable sound levels
• Brushed-finish sound absorption mufflers for a deep, refined note
• Plug-and-play installation with no cutting required
• Includes 170x112mm ovalized diamond black exhaust tips
• Manufacturer Part Number: CBK0041

Fits 2020-2021 Volkswagen GTI Autobahn, S, and SE models.

The APR Catback Exhaust System (MPN: CBK0038) is a premium T304 stainless-steel upgrade designed to improve the exhaust note, appearance, and flow of your MK7.5 GTI. Hand-crafted using argon-back-purged TIG welding, this system features a single 3-inch lead pipe transitioning through a smooth-cast rear splitter into dual 2.5-inch mandrel-bent tubes. The straight-through, brushed-finish mufflers are designed to deliver a deep growl while eliminating rasp and cabin drone, providing a refined yet aggressive tone.

Installation is a direct bolt-on process using rugged mounting brackets and high-quality hardware, including OEM-style slip clamps and Torca AccuSeal T304 tip clamps. The system is finished with removable 4-inch polished slash-cut tips, offering a motorsport-inspired look that fits perfectly within the factory rear valance. Its low-profile design also ensures adequate ground clearance for lowered vehicles.

• Argon-back-purged TIG welding throughout T304 stainless-steel construction
• 3" lead pipe to dual 2.5" mandrel-bent brushed tubing
• Ultra-smooth cast 3" to dual 2.5" rear splitter for optimized flow
• Straight-through brushed-finished mufflers for a deep, drone-free note
• Removable 4" polished slash-cut exhaust tips
• Direct bolt-on fitment with precise mounting brackets
• Lighter overall weight compared to the factory exhaust system
• Includes Torca AccuSeal T304 clamps for secure installation

Fits select 2008-2023 Ford F-250 and F-350 Super Duty models.

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0748 is engineered to replace your worn factory exhaust system with a precise, bolt-on solution. Designed to install from behind or near the last catalytic converter, this kit maintains all emissions equipment while improving exhaust flow through the use of mandrel-bent aluminized steel tubing. Unlike common crush-bent aftermarket alternatives, mandrel bending maintains a consistent diameter through every curve, reducing backpressure and ensuring reliable performance.

This multi-piece system is designed for a straightforward DIY installation, utilizing factory mounting points and requiring no welding or custom fabrication. The kit comes complete with all necessary gaskets and heavy-duty band clamps to ensure a leak-free seal and professional finish.

• Construction: Durable aluminized steel for corrosion resistance
• Design: Precision mandrel-bent tubing for superior exhaust flow
• Installation: Bolt-on, multi-piece design; no welding or bending required
• Included Hardware: (3) 4in. Band Clamps, (1) 3.5in. Band Clamp, (3) 4in. Band Clamp Hangers, (1) 3-Bolt Gasket, (3) Nuts, and (3) Bolts
• OE Interchange: FC3Z-5230-B
• Manufacturer Part Number: 106-0748
• Warranty: 2-year unlimited mileage warranty

Fits 1991-1992 Toyota Land Cruiser Base (4.0L).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0360 is engineered to provide a precision-matched, bolt-on solution for your vehicle's exhaust system. This kit eliminates the need for fabrication, welding, or pipe bending, utilizing a multi-piece design that bolts directly to factory mounting points. Constructed from durable aluminized steel, the system features mandrel-bent tubing to maintain a consistent diameter and optimize exhaust flow compared to standard crush-bent alternatives.

This kit is designed for installation from behind the catalytic converter and includes all necessary gaskets and hardware for a complete job. It is fully emissions-compliant, leaving all factory emissions equipment intact while restoring OE-level performance and sound. Every kit is packaged with clear installation instructions and is backed by a two-year warranty.

• Direct-fit for 1991-1992 Toyota Land Cruiser Base (4.0L)
• Durable aluminized steel construction with mandrel-bent piping
• Bolt-on design requires no welding or fabrication
• Includes (2) ring gaskets, clamps, and installation hardware
• Replaces OE part numbers 17404-61020, 17405-61320, and 17420-61130
• Two-year, unlimited mileage warranty
• Manufacturer Part Number: 106-0360

Fits 1999-2007 Toyota MR2 and MR-S (ZZW30) models equipped with the 1ZZ-FE engine.

The HKS Legamax Exhaust System is engineered to provide a sophisticated balance between increased exhaust flow and a refined, sporty sound. Designed as a direct-fit replacement for the restrictive factory exhaust components, this system reduces backpressure to improve throttle response and power across the RPM range. The Legamax series is specifically tuned to offer a deeper, more aggressive exhaust note under acceleration while maintaining a comfortable, drone-free cabin experience during cruising.

• Manufacturer Part Number: 3302-ST065
• Series: Legamax
• Specifically tuned for the 1ZZ-FE 1.8L I4 naturally aspirated engine
• High-quality construction for long-term corrosion resistance
• Direct-fit design utilizes factory mounting points for straightforward installation
• Polished tips for a clean, premium aesthetic

Fits 1993-1998 Nissan Skyline R33 ECR33 GTS25-t models equipped with the RB25DET engine.

The HKS Hi-Power 409 series offers a balance of performance and value by utilizing SUH409 stainless steel for the main piping and high-polish SUS304 stainless steel for the muffler shell and tip. This cat-back system is engineered to reduce backpressure, improving turbo spool-up and power delivery across the RB25DET rev range. The straight-through design ensures optimal exhaust flow while producing the signature deep HKS resonance.

• Manufacturer Part Number: 31006-AN014
• Series: Hi-Power 409
• Piping Material: SUH409 Stainless Steel
• Muffler & Tip Material: SUS304 Stainless Steel
• Chassis Fitment: Nissan Skyline R33 ECR33
• Engine Compatibility: RB25DET
• Direct bolt-on installation to factory mounting points

Fits 2020-2026 Chevrolet Corvette Stingray and E-Ray models. This AWE Touring Edition Exhaust is a dual 3-inch T304L stainless steel cat-back system engineered to provide a sophisticated, aggressive exhaust note for the LT2 engine while maintaining daily drivability. By utilizing a bespoke, valveless, asymmetric design with a unique crossover section, this system reduces flow restriction to deliver maximum gains of 19 hp and 15 lb-ft of torque at the wheels.

To eliminate unwanted frequencies, AWE incorporates their patented drone-canceling 180 Technology®, ensuring a pure exhaust soundtrack even when the vehicle switches between V4 and V8 modes. The system includes robust 8-inch internally-lined stainless steel flex sections to isolate engine movement and a bespoke aluminum heat shield that bolts to factory mounting locations for superior thermal protection without the risk of waterlogging common with heat blankets.

• Direct bolt-on fitment with no cutting required
• Handcrafted from 3-inch CNC mandrel-bent 0.065-wall U.S.-made T304L stainless steel
• Saves 31 lbs compared to the factory exhaust system
• Includes AWE AFM and NPP valve simulators to prevent CELs
• Quad 4.5-inch double-walled slash-cut Diamond Black tips
• No impact on factory emissions equipment
• Manufacturer Part Number: 3015-43159

Fits 1989-1991 Toyota 4Runner DLX and SR5 (3.0L).

The BRExhaust Direct-Fit Replacement Exhaust Kit (MPN 106-0397) provides a professional-grade alternative to factory components, engineered to restore exhaust system integrity with a precise, bolt-on fit. This kit replaces the exhaust components from behind the catalytic converter, utilizing a multi-piece design that simplifies DIY installation around chassis obstructions without requiring specialized bending or welding.

Constructed from durable aluminized steel, this system features precision mandrel-bent piping. Unlike standard crush-bent pipes that can restrict exhaust flow, mandrel bending maintains a consistent internal diameter throughout the bends to optimize performance and efficiency. This kit arrives as a complete solution, including the gaskets and hardware needed for a secure seal.

• Mandrel-bent aluminized steel construction for superior flow and corrosion resistance
• Bolt-on, multi-piece design ensures easy DIY installation and perfect fitment
• Direct replacement for OE part numbers 17430-YZZG2 and 17430-YZZP6
• Retains factory emissions equipment for full compliance
• Includes (1) ring gasket, (1) 1.75in. U-bolt clamp, (2) bolts, and (2) nuts
• 2-year unlimited mileage warranty

Fits 1995-2004 Toyota Tacoma Base, DLX, Limited, Pre Runner, and SR5 models equipped with the 3.4L engine.

The BRExhaust 106-0389 Direct-Fit Replacement Exhaust Kit provides a professional-grade solution for restoring your vehicle's exhaust system performance. Constructed from durable aluminized steel, this kit features precision mandrel-bent piping to ensure superior exhaust flow and backpressure management compared to standard crush-bent alternatives. The multi-piece, bolt-on design allows for a straightforward installation that follows the factory exhaust path without the need for welding, bending, or specialized fabrication.

This kit replaces the exhaust components from behind the catalytic converter while keeping all factory emissions equipment intact. It includes all necessary gaskets and hardware for a complete installation, ensuring a leak-free seal and reliable service life.

• Construction: Mandrel-bent aluminized steel for corrosion resistance and flow efficiency
• Fitment Type: Direct-fit bolt-on replacement (No welding required)
• Included Hardware: (1) 2-bolt gasket, (1) 2.5in U-bolt clamp, (2) ring gaskets, (2) 2.25in U-bolt clamps, (2) bolts, and (4) nuts
• OE Interchange: 17405-07030, 17430-07080, 17430-07090, 17430-07091, 17430-07092, 17430-07110, 17430-07120
• Warranty: Manufacturer 2-year unlimited mileage warranty
• MPN: 106-0389

Fits 2011-2014 Ford Mustang GT, Boss 302, and Shelby GT500 models. This Kooks OEM Cat-back exhaust system is engineered to optimize exhaust flow and maximize power for street and track applications.

Constructed from premium T304 aircraft-quality stainless steel, this system (MPN 11404200) is designed to withstand high-heat environments while resisting corrosion. Each system is handcrafted in the USA and undergoes dyno and race testing to ensure a precise fit and meaningful performance gains over the factory setup. The 2-3/4 inch to 3 inch mandrel-bent tubing provides a significant upgrade in exhaust volume and tone without sacrificing durability.

• Material: T304 Aircraft Quality Stainless Steel
• Inlet/Outlet: 2-3/4 inch x 3 inch
• Installation: Designed to fit with OEM components
• Origin: 100% Manufactured in the USA
• Manufacturer Part Number: 11404200
• Warranty: Limited Lifetime Warranty to the original purchaser

Fits 2014+ Honda Fit Sport (GK5).

The HKS Hi-Power Muffler (MPN: 32016-KH001) is engineered to reduce backpressure and improve exhaust flow, allowing the engine to breathe more efficiently. Inspired by GT and endurance racing, the Hi-Power series delivers a deep, resonant exhaust note that remains civil for daily driving while providing a aggressive tone under acceleration.

This specific model features a race-inspired canister design finished with high-quality carbon fiber tips, offering a premium aesthetic contrast against the vehicle's rear fascia. It is designed as a direct-fit upgrade that utilizes factory mounting locations for a straightforward installation.

• Manufacturer Part Number: 32016-KH001
• Product Line: HKS Hi-Power
• Tip Material: Carbon Fiber
• Fitment: 2014+ Honda Fit Sport (GK5)
• Installation: Direct bolt-on to factory exhaust points

Fits 1993-1998 Toyota Supra (3.0L Non-Turbo).

The HKS Hi-Power Exhaust system is engineered to optimize exhaust scavenging and deliver a resonant, aggressive tone for the naturally aspirated 3.0L Supra. Inspired by circuit and drag racing performance, the Hi-Power series features a high-velocity, straight-through design that minimizes backpressure. Constructed for durability and precision, this system replaces the restrictive factory exhaust to improve engine response and provide a race-inspired aesthetic.

• Direct fit for 1993-1998 Toyota Supra 3.0L Non-Turbo models
• High-quality stainless steel construction for long-term corrosion resistance
• Straight-through muffler design for maximum flow efficiency
• Large diameter polished exhaust tip
• Manufacturer Part Number: 32003-AT009
• Note: Designed for off-road use only

Fits the Nissan Skyline ER34 4-door sedan equipped with the RB25DET engine.

The HKS Hi-Power 409 exhaust system is designed for enthusiasts seeking the signature HKS sound and high-flow performance in a cost-effective package. This system utilizes a high-grade SUS304 stainless steel muffler shell and tip for maximum corrosion resistance and a mirror-polished finish, while the main piping is constructed from SUH409 stainless steel to optimize durability and value. The straight-through canister design reduces backpressure, allowing the RB25DET turbocharger to spool more efficiently and provide improved throttle response across the RPM range.

• Manufacturer Part Number: 31006-AN016
• Piping Material: SUH409 Stainless Steel
• Muffler & Tip Material: SUS304 Stainless Steel
• Optimized for turbocharged RB25DET applications
• Direct bolt-on installation to factory mounting points
• Signature HKS sport exhaust tone without excessive drone

Fits 2012-2014 Chrysler 300 SRT8 and Dodge Charger SRT8 (6.4L). This system replaces the restrictive factory exhaust with high-flow 304 stainless steel tubing and Corsa's signature acoustic engineering.

The Corsa Xtreme Cat-Back Exhaust system utilizes patented Reflective Sound Cancellation (RSC) technology to eliminate low-frequency resonance (drone) at cruising speeds while delivering an aggressive, high-performance exhaust note under acceleration. This 304 stainless steel system is engineered to flow 20% better than the stock assembly and reduces vehicle weight by 10 lbs. The direct bolt-on design ensures a precise fit to factory mounting points without the need for welding.

• Patented RSC Technology for a drone-free cabin experience
• Manufactured from premium 304 stainless steel for long-term durability
• Flows 20% better than the factory exhaust system
• Weight reduction of 10 lbs compared to OE components
• Easy bolt-on installation; no welding or cutting required
• Includes rectangular black-finished exhaust tips
• Manufacturer Part Number: 14464BLK
• Made in the U.S.A.

Fits 2022-2023 Honda Civic Si and 2023 Acura Integra A-Spec (1.5L).

The Borla S-Type Cat-Back exhaust system is engineered specifically for the 1.5L turbocharged platform, providing a significant upgrade in sound and exhaust velocity. This 2.5-inch diameter system features Borla's patented Polyphonic Harmonizer Technology, utilizing specific pipe diameters and lengths to create a clean, rich, and full-bodied exhaust note. Designed for the 4-door manual transmission FWD models, this system is built to deliver a more aggressive tone while maintaining Borla's strict no-drone guarantee.

• Construction: Premium T-304 austenitic stainless steel for maximum durability and corrosion resistance.
• Performance: 2.5-inch mandrel-bent tubing ensures ultra-smooth flow and increased exhaust velocity.
• Tips: Dual 4.5-inch bright chrome on T-304 stainless steel tips for a refined appearance.
• Technology: Features patented straight-through and multi-core technology for optimized power.
• Manufacturing: Precision CNC manufacturing ensures a direct-fit, bolt-on installation.
• Warranty: Backed by Borla’s Million-Mile Warranty.
• MPN: 140922

Fits 2022-2025 Volkswagen Jetta GLI.

The AWE Track Edition Exhaust is engineered for Jetta GLI owners who want the rawest, most aggressive acoustic profile possible. Handcrafted from CNC mandrel-bent T304L stainless steel, this system removes AWE’s 180 Technology® resonators to provide a deep, unfiltered rumble across the entire RPM range. By utilizing a straight-through design, this cat-back system maximizes exhaust flow, resulting in dyno-proven gains of +4 hp and +8 lb-ft of torque at the wheels while shedding 18 lbs compared to the factory unit.

Constructed with .065” wall thickness and featuring a 3” to 2.5” diameter transition, the Track Edition includes a slip-fit inlet adapter to ensure a perfect seal with the factory downpipe. The system is finished with massive 5” slash-cut, double-walled tips in chrome silver for a bold, high-performance aesthetic. Note: Due to its high volume and rowdy nature, this edition cannot be returned for sound preference.

• Manufacturer Part Number: 3020-32275
• Handcrafted from U.S.-sourced T304L stainless steel (.065” wall thickness)
• Dyno-proven max gains of +4 hp and +8 lb-ft of torque
• Saves 18 lbs over the stock exhaust system
• 5” double-walled, slash-cut chrome silver tips
• Direct bolt-on design for factory-like fitment
• AWE No CEL Guarantee and Lifetime Warranty
• Proudly engineered and manufactured in-house at AWE

Fits select 2012-2016 Porsche 911 (991.1) Carrera, Targa, and Turbo models (3.4L). Note: This system is specifically confirmed to fit non-PSE (Porsche Sport Exhaust) vehicles at this time.

The AWE Carrera Performance Exhaust is engineered for the 991 owner who demands increased power and a more aggressive acoustic profile without sacrificing daily drivability. Hand-crafted from T-304L stainless steel, this exhaust was developed and tested to be 100% drone-free on both PDK and manual transmissions. By replacing the restrictive factory unit, this system optimizes exhaust flow to deliver significant power gains while reducing rear-axle weight by 12 lbs.

This version is designed to integrate seamlessly with your factory exhaust tips, allowing for a stealthy look while providing the signature AWE tone throughout the power band. The bolt-on design ensures perfect fitment and requires no modification to factory emissions equipment, keeping the vehicle street-legal.

• Maximum gains: +29 hp and +33 lb-ft of torque at the crank
• Weight savings: 12 lbs lighter than the factory exhaust
• Construction: High-grade T-304L stainless steel
• PDK-friendly: Engineered to be 100% drone-free
• Emissions: Does not alter or affect factory emissions devices
• Installation: Reuses factory exhaust tips
• Manufacturer Part Number: 3015-11020

Fits 2020 Toyota GR Supra A90 (DB42).

The Remark Stainless Steel Cat-Back Exhaust is engineered to transform the acoustic profile and exhaust flow of the A90 Supra. Constructed from high-quality T304 stainless steel, this system replaces the restrictive factory piping from the catalytic converter back to the rear exit, reducing backpressure and enhancing throttle response.

Designed for a precise fit, this exhaust system utilizes factory mounting points for a straightforward installation. The mandrel-bent tubing ensures consistent diameter throughout the bends, maximizing flow efficiency while delivering the aggressive, deep exhaust note expected from the B58 powerplant.

• T304 stainless steel construction for superior corrosion resistance
• Precision mandrel-bent tubing for optimized exhaust scavenging
• Direct bolt-on fitment to factory hangers and mounting points
• Complete cat-back system for improved sound and performance
• Manufacturer Part Number: RK-C2076T-04

Fits 2014-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 (6.2L) Crew Cab/Double Cab models with Short or Standard beds. This Corsa Sport system is engineered to provide an aggressive exhaust note under acceleration while maintaining a drone-free experience during highway cruising.

Constructed from premium 304 stainless steel, this cat-back system (MPN 14866BLK) utilizes Corsa's patented Reflective Sound Cancellation (RSC) technology. This acoustic engineering targets and eliminates specific frequencies that cause interior cabin drone without restricting airflow. In fact, this system is designed to flow 400% better than the factory exhaust, enhancing overall performance while being lighter than the stock assembly.

• Patented No-Drone Reflective Sound Cancellation (RSC) technology
• Aggressive exhaust note under throttle; quiet at cruise
• Premium 304 stainless steel construction for maximum durability
• Dual-walled black stainless steel tips for a sleek, custom look
• Flows 400% better than stock exhaust systems
• Lighter than the factory exhaust assembly
• Easy bolt-on installation; no welding required
• Includes detailed printed instructions (full-color available online)
• Limited Lifetime Warranty
• Made in the U.S.A.