Fits 2006-2011 Honda Element EX, LX, and SC models (2.4L).

The Gibson Stainless Cat-Back Single Exhaust System is engineered to provide reliable performance and an aggressive exhaust note without the excessive interior drone often found in aftermarket systems. This system features 2.25-inch mandrel-bent stainless steel tubing to ensure consistent exhaust flow and reduced backpressure. At the heart of the system is the Superflow CFT muffler, a baffled and chambered design that contains no internal packing to wear out or blow out over time.

Installation is straightforward and hassle-free, utilizing factory-style hangers and included hardware for a direct bolt-on fit. Drivers can expect average performance gains of 5-10 horsepower. The system exits straight out the back and is finished with a polished stainless steel round slash-cut tip for a clean, professional appearance.

• 2.25-inch mandrel-bent stainless steel tubing
• Superflow CFT baffled/chambered muffler for consistent sound
• Polished stainless steel round slash-cut tip
• Direct bolt-on installation with included hardware and factory-style hangers
• Average gains of 5-10 horsepower
• No internal packing to blow out
• Lifetime Limited Warranty
• Manufacturer Part Number: 614001

Fits 2007-2009 Hummer H2 Base (6.2L).

The Gibson Single Exhaust system is engineered for drivers seeking reliable performance and an aggressive exhaust note. This cat-back system features high-flow 3.5-inch mandrel-bent stainless steel tubing to reduce restriction and improve efficiency. At the core of the system is the Superflow™ CFT Muffler, a baffled and chambered design that contains no internal packing to blow out or deteriorate over time. This configuration provides a deep, powerful sound while maintaining minimal interior drone.

Designed for a straightforward installation, this kit includes all necessary hardware and utilizes factory-style hangers for a secure, bolt-on fit. The system exits straight out the rear of the vehicle, finished with a polished stainless steel round slash-cut tip for a refined look.

• Main Piping: 3.5-inch mandrel-bent stainless steel tubing
• Muffler Type: Superflow™ CFT (Baffled/Chambered, no internal packing)
• Tip: Polished stainless round slash-cut design
• Installation: Bolt-on with included hardware and factory-style hangers
• Performance: Engineered for average gains of 5-10 horsepower
• Warranty: Lifetime Limited Warranty
• Manufacturer Part Number: 612501

Fits 2004-2011 Infiniti QX56 and Nissan Armada models (5.6L).

The Gibson Single Side Exhaust system is engineered to provide increased low-end torque and horsepower, specifically between 1,800 and 3,000 RPM. This makes it an ideal upgrade for heavy-duty applications such as towing, hauling, or climbing steep grades. Built from 3-inch mandrel-bent stainless steel tubing, this system ensures consistent exhaust flow without the restrictive bottlenecks found in factory crimp-bent pipes.

At the core of the system is the Superflow™ muffler. Featuring a baffled and chambered design with no internal packing to blow out over time, it delivers a deep, aggressive exterior tone while maintaining a quiet, drone-free experience inside the cabin. Installation is a straightforward bolt-on process using professional-grade hardware and factory-style hangers, requiring no welding or specialized tools. The system is finished with a polished stainless steel slash-cut tip that exits behind the rear passenger-side tire.

• 3-inch mandrel-bent stainless steel tubing for maximum flow
• Superflow™ baffled/chambered muffler (no internal packing)
• Includes polished stainless steel slash-cut exhaust tips
• Average gains of 10-15 HP and 15-20 lb-ft of torque
• Hassle-free bolt-on installation with factory-style hangers
• No welding required for assembly
• Manufacturer Part Number: 612213
• Lifetime Limited Warranty

Fits 2000-2002 Nissan Xterra SE and XE models (3.3L).

Designed for the Nissan enthusiast seeking improved low-end torque and towing performance, the Gibson Single Side Exhaust system delivers power gains specifically in the 1,800 to 3,000 RPM range. This cat-back system utilizes 2.25-inch stainless steel mandrel-bent tubing to maintain consistent exhaust flow and reduce backpressure. At the heart of the system is the Superflow™ muffler, a baffled and chambered design that eliminates internal packing while providing an aggressive exterior note with minimal interior cab drone.

Installation is a straightforward bolt-on process using factory-style hangers and the included hardware, requiring no welding. The system is finished with a polished stainless steel slash-cut tip that exits behind the rear tire for a professional look and sound.

• Manufacturer Part Number: 612203
• Tubing Diameter: 2.25-inch stainless steel mandrel-bent
• Muffler: Superflow™ Baffled and Chambered (No internal packing)
• Tip: Polished stainless steel slash-cut
• Fitment: Replaces factory exhaust from the catalytic converter back
• Installation: Bolt-on using factory hangers; no welding required
• Warranty: Limited Lifetime Warranty

Fits 1998-2000 Nissan Frontier SE and XE (2.4L).

Improve your truck's low-end power and exhaust note with the Gibson Single Side Cat-Back Exhaust System. Engineered as a direct bolt-on upgrade, this system uses 2.5-inch mandrel-bent stainless steel tubing to maximize flow and efficiency. It is specifically tuned to deliver increased torque and horsepower in the 1,800 to 3,000 RPM range, making it an ideal solution for towing, passing, and improved throttle response.

At the heart of the system is the Superflow™ baffled and chambered muffler. Unlike packed mufflers that degrade over time, this chambered design maintains its sound quality for the life of the vehicle, providing an aggressive exterior tone while keeping interior cab noise to a minimum. The system exits behind the rear tire and is finished with a polished stainless steel slash-cut tip for a clean, professional appearance.

• Tubing: 2.5-inch mandrel-bent stainless steel for consistent flow
• Muffler: Superflow™ baffled/chambered design with no internal packing to blow out
• Exit: Single side exit behind rear passenger tire
• Tip: Polished stainless steel slash-cut tip included
• Installation: Easy bolt-on fitment; includes factory-style hangers and all necessary hardware
• Performance: Optimizes low-end torque and horsepower for better towing and acceleration
• Part Number: 612201
• Warranty: Manufacturer Lifetime Limited Warranty

Fits select 1987-1996 Ford Bronco models (5.0L).

The Gibson Single Side Exhaust system is engineered to deliver improved low-end performance, specifically targeting horsepower and torque gains in the 1,800 to 3,000 RPM range. This 3-inch cat-back system is constructed from mandrel-bent aluminized tubing to ensure consistent flow and durability. It features a Superflow™ baffled and chambered muffler that provides an aggressive exterior sound profile while remaining quieter in the cab than many performance alternatives.

• Performance Gains: Typical increases of 10-15 HP and 15-20 lb-ft of torque for improved towing and passing power.
• High-Flow Construction: 3-inch mandrel-bent aluminized steel tubing maintain constant diameter through bends.
• Superflow™ Muffler: Baffled and chambered design with no internal packing to blow out over time.
• Installation: Direct bolt-on design includes all hardware and factory-style hangers; no welding required.
• Finish: Includes a polished stainless steel slash-cut tip for a professional look.
• Exit Style: Single side exit behind the rear tire.
• Manufacturer Part Number: 319675

Fits 2007-2021 Toyota Tundra models with the 4.7L engine. The Gibson Single Side Cat-Back Exhaust is engineered to provide increased low-end torque and horsepower, making it an ideal choice for towing, passing, and improved acceleration. This system utilizes a Superflow muffler with a baffled and chambered design, ensuring maximum flow without the need for internal packing that can degrade over time.

Dyno-tested to deliver average gains of 10-15 horsepower and 15-20 lb-ft of torque between 1,800 and 3,000 RPM, this exhaust provides an aggressive exterior note while maintaining a quiet cab environment. The 3-inch mandrel-bent aluminized tubing ensures consistent exhaust flow, and the entire system bolts directly to factory mounting points for a straightforward installation without the need for welding.

• Baffled and chambered Superflow muffler (no internal packing)
• 3-inch mandrel-bent aluminized steel tubing
• Polished stainless steel slash-cut tip
• Minimal interior drone with an aggressive exterior sound
• Includes all necessary hardware and factory-style hangers
• Bolt-on installation requires no welding
• Manufacturer Part Number: 18603
• Lifetime Limited Warranty

Fits select 2005-2019 Nissan Frontier models including Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, and SV (4.0L).

The Gibson Superflow Single Side Exhaust system is engineered for the Nissan Frontier owner who needs improved low-end torque and horsepower for towing, hauling, and off-road performance. Designed to produce maximum power between 1800 and 3000 RPM, this system utilizes a Superflow baffled and chambered muffler with no internal packing to maintain a consistent, aggressive tone without excessive interior drone. The system exits behind the rear tire, providing a clean look and improved clearance.

Constructed from heavy-duty aluminized mandrel-bent tubing, this 3-inch cat-back system ensures smooth exhaust flow. It features a completely bolt-on installation using factory-style hangers and includes all necessary hardware, requiring no welding or specialized tools. The system is finished with a polished stainless steel slash-cut tip for a professional appearance.

• Baffled/chambered Superflow muffler for maximum low-end torque
• 3-inch aluminized mandrel-bent tubing for optimal flow
• Polished stainless steel slash-cut tip
• Hassle-free, bolt-on installation with factory-style hangers
• Average gains of 10-15 HP and 15-20 lb-ft of torque
• Manufacturer Part Number: 12211
• Lifetime Limited Warranty

The AWE Touring Edition Exhaust for the B8 and B8.5 Audi A4 provides a sophisticated, refined tone that is civil during part-throttle cruising but delivers a distinctive sound under wide-open throttle. Fits 2009-2016 Audi A4 and A4 Quattro models (Base, Premium, Premium Plus, Prestige, Avant, and Cabriolet).

Engineered using CAD modeling, this system replaces the restrictive, crimped factory tubing with smooth, mandrel-bent T304L stainless steel to maximize exhaust flow. This optimized path yields gains of 8-9 horsepower and 6-7 lb-ft of torque at the crank. The system features AWE's patented 180 Technology® to eliminate drone while maintaining a high-performance acoustic profile. This quad-outlet version features four 90mm (3.5 inch) double-walled, slash-cut tips finished in Diamond Black. Each tip is individually adjustable, allowing for custom stagger and depth adjustment within the rear valance.

• Fits 2009-2016 Audi A4 and A4 Quattro
• Power gains: +8-9 crank HP and +6-7 crank TQ
• T304L stainless steel construction
• Patented 180 Technology® drone-canceling resonators
• Quad 90mm (3.5") slash-cut Diamond Black tips
• Handcrafted in the USA
• Manufacturer Part Number: 3015-43020

Note: This quad-tip system requires a quad-tip rear valance/conversion kit for proper installation and fitment.

Fits 2021-2025 Ford F-150 XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, STX, SSV, and Police Responder (2.7L / 3.5L / 5.0L) with 145.4-inch and 157.2-inch wheelbases.

The AWE 0FG Exhaust system provides a refined yet aggressive sound profile for the Ford F-150, engineered to eliminate interior drone while maximizing flow. Handcrafted from U.S.-sourced 0.065-inch wall T304L stainless steel, this 3-inch cat-back system features a non-resonated mid-pipe and a 100% straight-through design. The system is equipped with AWE’s patented 180 Technology®, a proprietary drone-canceling solution that ensures a clean exhaust note at cruising speeds without sacrificing performance under load.

This dual-exit configuration terminates behind the rear passenger-side fender with two 4.5-inch double-walled, slash-cut tips in a Diamond Black finish. Each tip is individually adjustable, allowing owners to customize the bumper depth and angle to their preference. Designed as a direct bolt-on for the factory Y-pipe, this system requires no cutting or welding for installation.

• Manufacturer Part Number: 3015-23059
• Full 3-inch mandrel-bent T304L stainless steel construction
• Patented 180 Technology® drone-canceling resonators
• Dual 4.5-inch slash-cut tips in Diamond Black
• Fits 145.4" and 157.2" wheelbases
• Direct bolt-on replacement for stock Y-pipe
• AWE No CEL Guarantee and Lifetime Warranty
• Proudly engineered and manufactured in the USA

Fits 2015-2020 Audi A3 Quattro Premium, Premium Plus, and Prestige models (2.0L).

The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15352 is engineered to provide a refined, resonant exhaust note for the Audi A3 Quattro without compromising cabin comfort. This system features a moderate exterior sound profile and a mild interior drone level, making it ideal for long-distance driving and daily use. Constructed from durable 409 stainless steel, the kit utilizes fast-flowing 2.5-inch mandrel-bent main piping and a straight-through muffler design to reduce backpressure and improve exhaust scavenging.

This direct-fit exhaust replaces the factory components from the catalytic converter back. Developed using precision 3D scans and CNC robotic manufacturing, the 15352 ensures exact fitment to factory mounting points. The system terminates in a dual split rear exit featuring 3.5-inch polished, double-wall, angle-cut folded-edge tips for a clean, premium aesthetic.

• 409 stainless steel construction for corrosion resistance
• 2.5-inch mandrel-bent tubing for optimized flow
• Straight-through muffler delivers signature MagnaFlow sound
• Dual 3.5-inch polished stainless steel tips
• Direct-fit design for straightforward installation
• Manufacturer Part Number: 15352
• Limited lifetime construction warranty

Fits 2006-2007 Hummer H3 Base models with the 3.5L or 3.7L engine.

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0351 is a comprehensive solution for restoring the exhaust system on your Hummer H3. This kit is engineered to serve as a high-quality alternative to OEM components, utilizing precision mandrel-bent pipes to ensure consistent diameter throughout every bend. Unlike standard crush-bent tubing, this design maintains superior exhaust flow and reduces backpressure. Constructed from durable aluminized steel, this system provides reliable corrosion resistance and long-term durability under demanding conditions.

Designed for the DIY-friendly installer, this multi-piece, bolt-on kit replaces all exhaust components from the rear of the catalytic converter. The direct-fit design eliminates the need for specialized bending or welding, securing directly to factory mounting points. Each kit is packaged with all necessary gaskets and hardware to ensure a leak-free seal and professional-grade installation.

• Material: Corrosion-resistant aluminized steel
• Design: Mandrel-bent tubing for optimized exhaust flow
• Installation: Direct bolt-on; no welding or fabrication required
• Components Included: (2) Nuts, (2) Bolts, (3) 2.5-inch U-bolt clamps, and gaskets
• Emissions: Retains factory emissions equipment and compliance
• OE Interchange: 15233771, 15268699, 15297148, 15931261
• Warranty: 2-year unlimited mileage warranty
• Part Number: 106-0351

Fits select 2009-2012 Ford Escape (Limited, XLS, XLT) and 2009-2011 Mazda Tribute (i, S).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0062 provides a precision-engineered solution for replacing a corroded or failing factory exhaust system. This kit features mandrel-bent aluminized steel tubing, which maintains a constant diameter through every curve to optimize exhaust flow and reduce backpressure compared to standard crush-bent alternatives. Designed as a complete bolt-on system from the final catalytic converter back, it allows for a straightforward installation that utilizes factory mounting points without the need for specialized welding or pipe bending.

Built to resist corrosion and endure daily driving conditions, this multi-piece kit simplifies DIY installation by allowing for easier maneuvering around chassis obstructions. Every component required to restore your vehicle's exhaust performance and sound is included in the box, ensuring compatibility with your existing emissions equipment.

• Construction: Durable Aluminized Steel
• Piping Type: Precision Mandrel-Bent
• Installation: Bolt-on, no welding required
• Included Hardware: (1) Donut Gasket, (1) 2.25in U-Bolt Clamp, (2) Bolts, (2) Nuts
• OE Interchange: 9L8Z-5230-C, 9L8Z-5A212-A, 9L8Z-5A212-B, 9L8Z-5A212-C, AL8Z-5230-A, AL8Z-5230-B, AL8Z-5K256-A
• Manufacturer Part Number: 106-0062
• Warranty: 2-Year Limited

Fits 2007-2014 Chevrolet Avalanche, Suburban 1500, and GMC Yukon XL 1500 (5.3L).

The Gibson Dual Extreme Cat-Back Exhaust system is engineered for drivers seeking an aggressive, performance-oriented tone with a distinctive look. This system features dual tailpipes that exit at an angle behind the rear tires, providing a bold aesthetic and high-clearance functionality. At the heart of the system is the Superflow CFT muffler, a baffled and chambered design with no internal packing to blow out, ensuring a consistent, powerful sound with minimal interior drone.

Constructed from aluminized mandrel-bent tubing, this kit is designed to optimize exhaust flow. The 2.25-inch diameter piping helps produce average gains of 15-20 horsepower while maintaining the backpressure needed for low-end torque. The system is finished with polished stainless steel slash-cut tips for a premium look. Installation is a straightforward bolt-on process using factory-style hangers, requiring no welding or specialized fabrication.

• System Type: Cat-Back Dual Extreme
• Main Piping Diameter: 2.25-inch
• Material: Aluminized Mandrel-Bent Tubing
• Muffler Type: Superflow™ CFT (Baffled/Chambered)
• Tips: Polished Stainless Slash-Cut Clamp-On
• Installation: Bolt-on; no welding required
• Manufacturer Part Number: 5572
• Warranty: Lifetime Limited Warranty

Fits select 2006-2009 Chevrolet Trailblazer and GMC Envoy (4.2L).

The Gibson Single Side Exhaust system is engineered to provide increased low-end torque and horsepower, specifically targeting the 1800 to 3000 RPM range. This makes it an ideal upgrade for 4.2L Trailblazer and Envoy owners looking for improved acceleration, towing capability, and passing power. The system utilizes 2.5-inch aluminized mandrel-bent tubing to maintain consistent flow and a Superflow™ baffled/chambered muffler that delivers an aggressive exterior note with minimal interior drone.

Designed for a hassle-free, bolt-on installation, this kit uses factory-style hangers and requires no welding. The exhaust exits behind the rear tire and is finished with a polished stainless steel slash-cut tip for a clean, professional appearance.

• Main Piping: 2.5-inch aluminized mandrel-bent tubing
• Muffler Type: Gibson Superflow™ baffled and chambered (no internal packing)
• Exit Location: Single side, exits behind rear tire
• Tip Style: Polished stainless steel slash-cut
• Installation: Bolt-on, no welding required; includes hardware and factory-style hangers
• Performance: Tested average gains of 10-15 HP and 15-20 lb-ft of torque
• Manufacturer Part Number: 315599
• Warranty: Lifetime Limited Warranty

Fits 2007-2014 Toyota FJ Cruiser Base, Trail Teams Special Edition, and TRD Special Edition models (4.0L).

The Gibson Dual Split Cat-Back exhaust system is designed for the FJ Cruiser enthusiast looking for an aggressive, throaty exhaust note and improved performance. This system features Gibson’s Superflow™ muffler, a baffled and chambered design with no internal packing to blow out, ensuring consistent sound quality over the life of the vehicle. By reducing backpressure, this exhaust helps generate increased horsepower and torque for better off-road and highway capability.

Constructed from 2.5-inch aluminized mandrel-bent tubing, this kit maintains constant diameter through every bend to maximize flow. The system exits behind each rear tire for a balanced look and includes polished T304 stainless steel slash-cut tips. Designed as a direct bolt-on replacement, it uses factory mounting points for a hassle-free installation with no welding required.

• Main Piping: 2.5in aluminized mandrel-bent tubing
• Muffler Type: Superflow™ baffled/chambered (no internal packing)
• Exit Style: Dual rear exit (one behind each rear tire)
• Tips: Polished stainless steel slash-cut tips
• Installation: Bolt-on design; no welding or cutting required
• Includes all necessary hardware and hangers
• Manufacturer Part Number: 18808
• Limited Lifetime Warranty

Fits 2009-2021 Toyota Tundra models equipped with the 5.7L V8 engine, including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro trims.

This Borla ATAK® Cat-Back™ system (MPN: 141024BC) is engineered to deliver an aggressive, high-velocity exhaust note without interior cabin drone. This true dual, split side-exit system features a 2.25-inch diameter flow path constructed from premium austenitic T-304 stainless steel. The design includes an internal H-pipe in the muffler to balance exhaust pulses, optimizing both the deep V8 growl and overall performance. Despite being a full dual system, the lightweight T-304 fabrication ensures it weighs less than the factory single exhaust while providing superior flow characteristics.

The system is finished with 4-inch round black chrome tips over T-304 stainless steel. Note: Do not use Borla stainless steel polish (p# 21499) on these black chrome tips; use only hot water and a microfiber cloth for cleaning. Every system is built using CNC manufacturing and ultra-smooth mandrel bends for an accurate fit and maximum exhaust velocity.

• System Type: Cat-Back™ True Dual
• Tubing Diameter: 2.25"
• Tip Description: 4" Round Black Chrome on T-304 Stainless Steel
• Exit Style: Split Side Exit
• Material: Premium T-304 Stainless Steel
• Technology: Patented straight-through and multi-core ATAK® sound
• Warranty: Borla Million-Mile Warranty
• Manufacturer Part Number: 141024BC

Fits 2018-2023 Suzuki Jimny 3-door models (1.4L) equipped with 4WD and either automatic or manual transmissions. Please note: this vehicle configuration is not available in North American markets.

The Borla S-Type Cat-Back system (MPN: 140923BC) is engineered to provide the classic Borla "Sound of Power" for the Suzuki Jimny without introducing cabin drone or resonance. This 2-inch diameter system is constructed from premium T-304 stainless steel, offering superior corrosion resistance and durability compared to standard T-400 series materials. The exhaust gases are channeled through ultra-smooth mandrel bends to maximize flow and exhaust velocity, utilizing patented straight-through and multi-core technology to optimize engine performance.

This system exits through dual 3.5-inch round black chrome tips over T-304 stainless steel. To maintain the finish of the black chrome tips, do not use traditional stainless steel polishes; Borla recommends cleaning exclusively with hot water and a microfiber cloth.

• System Type: Cat-Back
• Tubing Diameter: 2.0 inches
• Sound Level: S-Type (Aggressive yet refined)
• Tip Description: Dual 3.5-inch Round Black Chrome on T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Manufacturing: CNC Machined with Mandrel Bends
• MPN: 140923BC

Fits 2009-2021 Toyota Tundra (4.6L / 5.7L) models including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

This Borla Touring Cat-Back system is a true dual, split-side exit exhaust engineered to provide the Tundra with a mellow, sophisticated V8 growl without any interior drone. The system features an internal H-pipe to balance exhaust pulses, improving both sound quality and performance. Built from premium austenitic T-304 stainless steel, it offers superior durability and corrosion resistance compared to T-400 series alternatives. The mandrel-bent 2.25-inch tubing and straight-through muffler design increase exhaust velocity and flow while weighing less than the factory single-exhaust setup.

The system is finished with dual 4-inch round black chrome on T-304 stainless steel tips. To maintain the finish, clean with hot water and a microfiber cloth; do not use abrasive polishes or chemical cleaners on the black chrome surface.

• System Type: Cat-Back Exhaust
• Series: Touring
• Configuration: True Dual, Split Side Exit
• Tubing Diameter: 2.25"
• Tip Size/Finish: 4" Round Black Chrome
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140332BC
• Warranty: Million-Mile Warranty

Fits 2014-2019 Chevrolet Corvette Stingray and 2017-2018 Grand Sport (excluding Grand Sport models with manual transmission).

The Borla ATAK (Abnormally Toxic Air Kill) Rear Section exhaust system is engineered for the C7 Corvette enthusiast who demands the highest available decibel levels and a sharp, aggressive exhaust note. This system is specifically tuned for vehicles equipped with Active Fuel Management (AFM) but without the NPP Dual Mode exhaust option, ensuring the sensory feedback and acoustic clarity needed to stay within the powerband during spirited driving.

• Series: ATAK Rear Section
• Vehicle Fitment: 2014-2019 Corvette C7 (Stingray/Grand Sport)
• Transmission Fitment: Fits all Stingray models; fits Grand Sport Automatic only
• Valve Configuration: Includes AFM valves; designed for vehicles without NPP
• Tip Style: Quad Round Rolled Intercooled (IC)
• Material: High-quality T-304 stainless steel construction
• Manufacturer Part Number: 11863

Fits 2006-2013 BMW 325i, 325xi, 328i, 328i xDrive, and 328xi (L6-3.0L Non-Turbo).

The aFe Power MACH Force-XP cat-back exhaust system is engineered to improve flow and resonance for the E92 and E93 chassis BMW 3-Series. Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing with a brushed finish, this system is 100% hand TIG-welded for maximum strength and durability. In dyno testing, this configuration produced gains of up to 4 horsepower and 8 lbs. x ft. of torque, providing a performance boost across the power band.

This system features a high-flow 16-inch 304 stainless steel muffler with a single-in/dual-out design to maintain a refined yet aggressive exhaust note. The exit is finished with dual 3-inch laser-etched, polished 304 stainless steel tips. While this system utilizes factory hanger locations, please note that cutting is required for installation unless used in conjunction with aFe Power race pipes (PN 49-36319).

• 2.5-inch diameter 304 stainless steel mandrel-bent tubing
• Dual 3-inch laser-etched polished 304 stainless steel tips
• High-flow 16-inch single-in/dual-out muffler
• Hand TIG-welded for superior weld integrity
• Utilizes factory mounting locations for a secure fit
• 2-year limited warranty
• Manufacturer Part Number: 49-36313

Fits 2022-2025 Ford Bronco Raptor (V6-3.0L).

Engineered for maximum flow and a refined, aggressive tone, the aFe Vulcan Series cat-back exhaust system is built specifically for the V6-3.0L twin-turbocharged Ford Bronco Raptor. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing to ensure long-term durability and high-flow performance. A mitered merge x-pipe balances exhaust pulses to maximize scavenging and minimize drone, while an acoustically tuned expansion chamber provides a deep, resonant exhaust note. For a premium finish, the system features dual 4-1/2 inch polished 304 stainless steel tips with laser-etched aFe POWER logos.

The Vulcan Series maintains the functionality of the Raptor's active exhaust by incorporating factory-style valves that utilize the OE exhaust valve motors. This allows for seamless integration with factory drive modes to regulate exhaust flow and volume based on throttle position. The system is 100% MIG-welded for race-proven strength and utilizes factory-style flanges and hangers for a secure, direct bolt-on installation without the need for cutting or permanent modifications.

• Manufacturer Part Number: 49-33154-P
• Material: 3in Mandrel-Bent 304 Stainless Steel Tubing
• Tips: Dual 4-1/2in Polished 304 Stainless Steel
• Integrated factory-style exhaust valves (retains factory valve motors, motors not included)
• Mitered merge x-pipe for improved pulse balancing and scavenging
• Acoustically tuned expansion chamber for deep, drone-reduced sound
• Direct bolt-on installation using factory hangers and flanges
• 100% MIG-welded for maximum durability

Fits 2022-2025 Ford Bronco Raptor (V6-3.0L).

The aFe Vulcan Series cat-back exhaust system is engineered to enhance the 2022-2025 Ford Bronco Raptor, providing a significant upgrade in both sound profile and exhaust flow. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing for maximum durability and corrosion resistance. It features an acoustically tuned expansion chamber that delivers a deep, powerful exhaust note without excessive drone during highway driving.

This direct bolt-on system utilizes factory-style flanges and hangers for a secure fit that requires no cutting or modification for installation. It integrates factory-style exhaust valves that reuse your original exhaust valve motors (not included), allowing you to maintain control over exhaust flow and sound levels via the factory drive modes. The system is finished with dual 4-inch black 304 stainless steel clamp-on tips, each featuring a laser-etched aFe POWER logo for a custom look.

• Manufacturer Part Number: 49-33154-B
• Constructed from 3-inch mandrel-bent 304 stainless steel tubing
• Dual 4-inch black 304 stainless steel clamp-on exhaust tips
• Integrated factory-style exhaust valves (reuses OE motors)
• Acoustically tuned expansion chamber for a refined, deep tone
• 100% MIG-welded for race-proven strength and longevity
• Direct bolt-on installation using factory mounting points

Fits 2020-2026 Chevrolet Silverado 2500 HD and 3500 HD models.

The Gibson Black Elite Series cat-back exhaust system (Part #616518B) delivers a refined, deep exhaust note while significantly upgrading the visual profile of your truck. Engineered for the 2020-2026 Silverado HD, this system is constructed from 3.5-inch mandrel-bent stainless steel tubing to maintain consistent flow and reduce backpressure. At the center of the system is Gibson’s Superflow muffler, which uses a baffled and chambered design rather than internal packing to ensure a consistent sound that won't degrade over time.

The signature feature of the Black Elite line is the T-304 stainless steel tips, finished in a proprietary black coating for extreme durability against heat and road debris. This kit is a direct-fit upgrade designed for simple installation and is backed by a limited lifetime warranty.

• 3.5-inch mandrel-bent stainless steel tubing
• Baffled and chambered Superflow muffler (8-inch oval body)
• T-304 stainless steel rolled slash-cut tips with premium black finish
• Minimal interior drone with a deep, mild exterior tone
• No internal packing to blow out or deteriorate
• Clamp-on installation with included hardware
• Made in the USA
• Manufacturer Part Number: 616518B

Fits select 2020-2025 BMW M340i and M340i xDrive, and 2021-2026 BMW M440i and M440i xDrive (G20/G22/G23/G26 chassis).

The AWE Touring Edition Exhaust provides the ideal balance of performance and daily-driver refinement for the B58-powered BMW M340i and M440i. This dual 3-inch downpipe-back system is handcrafted from U.S.-sourced T304L stainless steel with a 0.065-inch wall thickness. This specific resonated configuration is recommended for vehicles equipped with aftermarket downpipes to maintain a sophisticated tone without excessive volume. It features AWE’s patented 180 Technology®, a drone-canceling solution that targets and eliminates specific frequencies to ensure a clear cabin experience at highway speeds.

Engineering highlights include a stamped stainless steel merge that provides a 65% increase in flow over the factory exhaust, facilitating gains of up to 16 hp and 12 lb-ft of torque at the wheels. The system terminates in statement-making quad 102mm double-walled, slash-cut diamond black tips. This is a direct bolt-on upgrade that requires no cutting for installation and includes a No Check Engine Light (CEL) guarantee.

• Manufacturer Part Number: 3015-43158
• Dual 3-inch CNC mandrel-bent T304L stainless steel construction
• Patented 180 Technology® drone-canceling resonators
• Resonated mid-pipes optimized for stock or aftermarket downpipes
• Quad 102mm diamond black double-walled slash-cut tips
• Max gains of +16 hp and +12 lb-ft of torque at the wheels
• 65% flow increase over OE exhaust system
• Direct bolt-on installation—no cutting required
• Lifetime Warranty

Fits 2020-2026 Chevrolet Corvette Stingray and E-Ray models (LT2 6.2L). This AWE Touring Edition Exhaust is a dual 3-inch T304L stainless steel cat-back system engineered to deliver an aggressive, exotic exhaust note without sacrificing daily drivability. Featuring an asymmetric valveless design, this system minimizes flow restriction while managing the transition between V4 and V8 modes to eliminate in-cabin tone changes.

Constructed from U.S.-sourced 0.065-inch wall T304L stainless steel, the system utilizes AWE’s patented 180 Technology® to target and cancel drone-prone frequencies. The inclusion of 8-inch internally lined flex sections allows for engine movement, protecting the system from stress and fatigue. For a clean look and thermal protection, a bespoke aluminum heat shield is included, mounting directly to factory locations behind the rear bumper mesh.

• Direct bolt-on fitment replaces factory exhaust without cutting
• Max gains of 19 hp and 15 lb-ft of torque at the wheels
• Reduces vehicle weight by 31 lbs compared to the OE unit
• Patented 180 Technology® ensures a drone-free highway experience
• Includes AWE AFM and NPP valve simulators to prevent CELs
• Quad 4.5-inch double-walled slash-cut chrome silver tips
• Handcrafted from CNC mandrel-bent 3-inch T304L stainless steel
• Manufacturer Part Number: 3015-42151

Fits 2009-2013 Chevrolet Corvette Base, Grand Sport, Z06, ZR1, 427, and Z06 Carbon models.

The SLP LoudMouth Cat-Back Exhaust System (part number 32000) is engineered to provide maximum exhaust flow and a signature aggressive tone for the C6 Corvette. This system replaces the restrictive factory exhaust from the catalytic converters back, reducing backpressure to improve engine efficiency and power delivery. Constructed for long-term durability and a precise fit, it uses factory mounting points for a straightforward installation.

• Aggressive LoudMouth series exhaust note
• High-flow design reduces backpressure and improves throttle response
• Cat-back configuration replaces all piping behind the factory catalytic converters
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: 32000

Fits select 2012-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims (V6-3.6L / 3.6L).

Designed specifically for the demands of off-roading, the MagnaFlow Rock Crawler Series Cat-Back Performance Exhaust System (15237) maximizes ground clearance for improved boulder-climbing capabilities. The system features a high-clearance, weight-optimized design with a turndown-style tipless exit that stays tucked away to prevent damage and improve departure angles on technical trails.

Constructed from durable, corrosion-resistant stainless steel, this system utilizes 2.5-inch mandrel-bent main piping for unrestricted flow. The single straight-through muffler is dyno-tested to deliver MagnaFlow’s signature aggressive exterior sound while maintaining moderate interior resonance. Each kit is developed using extensive 3D scanning for precise fitment, allowing for a straightforward, direct-fit installation onto your rig.

• Manufacturer Part Number: 15237
• Piping Diameter: 2.5 inches
• Construction: Mandrel-bent stainless steel
• Exit Configuration: Single Straight Driver Side Rear (Turndown Style)
• Muffler Type: Straight-Through
• Sound Profile: Aggressive Exterior / Moderate Interior
• Installation: Direct-fit; 3D scanned for precision
• Manufacturing: CNC robotic precision manufacturing

Fits 2024-2025 Ford F-150 Lariat, SSV, STX, Tremor, XL, and XLT models (5.0L).

Upgrade your truck's presence and performance with the Gibson Black Elite Series Split Rear Exhaust. This system is engineered to provide an aggressive, rich tone while maintaining minimal interior drone, thanks to the baffled and chambered Superflow muffler design. The kit features massive 5.0-inch stainless steel tips finished in an exclusive black ceramic coating for a premium, long-lasting look. This system is designed for a hassle-free, bolt-on installation, utilizing the factory over-axle pipes and heat shields for a seamless fit.

• Manufacturer Part Number: 69226B
• Muffler Type: Baffled and Chambered Superflow design (No internal packing)
• Construction: High-quality stainless steel
• Tips: Dual 5.0-inch stainless steel with black ceramic finish
• Exit: Split Rear (exits behind rear tires)
• Installation: Direct bolt-on; reuses factory over-axle pipes and heat shields
• Origin: Made in the USA
• Warranty: Lifetime Limited Warranty

Fits 2005-2006 Ford F-250 and F-350 Super Duty (6.8L).

The Gibson Dual Sport Cat-Back Exhaust System (69101) is engineered to provide a powerful, deep exhaust tone while maintaining a quiet cab environment. Designed for truck owners who tow, the dual exit points behind the rear tires ensure that exhaust gases and heat stay clear of trailers and cargo. This system features 2.5-inch stainless steel mandrel-bent tubing and a Superflow™ baffled muffler, providing maximum flow and a consistent sound profile without the maintenance of internal packing.

This kit is a complete bolt-on solution that utilizes heavy-duty, factory-style hangers for a straightforward installation with no welding required. Dyno testing on this 6.8L application indicates average gains of 10-15 horsepower and 15-20 lb-ft of torque.

• 2.5-inch stainless steel mandrel-bent tubing for optimized exhaust flow
• Superflow™ baffled and chambered muffler prevents internal packing blowout
• Minimal interior drone with an aggressive external sound profile
• Dual polished stainless round slash-cut clamp-on tips
• Includes all necessary hardware and factory-style hangers
• Simple bolt-on installation with no welding or drilling required
• Manufacturer Part Number: 69101
• Backed by a Lifetime Limited Warranty