Fits 2020-2025 Chevrolet Corvette Stingray (6.2L) equipped with factory Performance Exhaust and AFM.

The Corsa Performance 4 Valve NPP Exhaust system provides total acoustic control for the C8 Corvette. This 3.0-inch valved cat-back system utilizes Corsa’s patented Reflective Sound Cancellation (RSC®) No Drone Technology, ensuring a refined cabin experience during cruising while delivering an aggressive, high-performance exhaust note under load. The system is engineered to toggle seamlessly between Sport and Xtreme sound levels, maintaining all factory-integrated sound modes.

Built to handle the intense heat of the C8’s mid-engine configuration, this exhaust features Corsa’s exclusive cast AFM and NPP active valve assemblies. These components bolt directly to the factory actuator motors for perfect ECM integration, ensuring no Check Engine Light (CEL) codes follow the valve relearn sequence. Manufactured in the USA from premium 304 stainless steel, this system is 13 pounds lighter than the factory exhaust and provides dyno-proven performance gains.

• Performance Gains: Up to +19 HP and +16 lb-ft Tq over factory performance exhaust
• Weight Reduction: 13 lbs lighter than stock
• Sound Levels: +9 decibels (Louder) and -1 decibel (Quieter) than factory valved system
• Construction: 3.0-inch 304 Stainless Steel
• Tip Style: 4.5-inch Black Quad Tips
• Hardware: Includes Corsa spec cast AFM and NPP active valve assemblies
• Warranty: Lifetime Exhaust; 5-Year Valve Warranty
• Manufacturer Part Number: 21100BLK

Fits 2018-2023 Ford Mustang GT and GT Premium (5.0L) Fastback models.

The Corsa 3-inch Cat-Back Exhaust System (MPN: 21001GNM) is engineered to deliver a custom-tuned exhaust note for your 5.0L Mustang GT, ranging from Touring to Xtreme. Constructed from premium 304 stainless steel, this system maximizes exhaust flow and durability. Performance testing indicates this system flows 17% better than stock with valves open and 28% better with valves closed, all while maintaining the vehicle's factory Quiet Start functionality.

The dual rear exit design features aggressive 4-inch dual-walled gunmetal PVD stainless steel tips for a high-end finish. This system is a direct bolt-on replacement for the factory exhaust, requiring no welding for installation. Every kit includes detailed instructions and all necessary hardware for a straightforward upgrade.

• 3.0-inch mandrel-bent 304 stainless steel construction
• 4.0-inch dual-walled gunmetal PVD stainless steel tips
• 17% flow increase (Open Valve) / 28% flow increase (Closed Valve) over OE
• Maintains factory Quiet Start functionality
• Custom-tuned exhaust note from Touring to Xtreme
• Direct bolt-on installation; no welding required
• Made in the U.S.A.
• Manufacturer Part Number: 21001GNM
• Limited Lifetime Warranty

Fits 2018-2023 Ford Mustang GT and GT Premium Fastback models equipped with the 5.0L engine.

This Corsa 3-inch cat-back exhaust system is engineered to maximize exhaust flow while maintaining complete control over your Mustang's acoustic profile. Constructed from premium 304 stainless steel, this system utilizes mandrel-bent tubing to achieve significant flow improvements over the factory exhaust—delivering 17% better flow with valves open and a substantial 28% improvement when closed. The design is specifically tuned to retain the vehicle's Quiet Start functionality while offering an exhaust note that ranges from Touring to Xtreme under load.

Installation is a straightforward, bolt-on process that utilizes factory mounting points, requiring no welding or permanent vehicle modifications. The system is finished with quad 4-inch dual-walled black tips for a refined, aggressive aesthetic that resists heat discoloration.

• System Diameter: 3.0-inch
• Tip Size: 4.0-inch Dual-Walled Black Tips
• Exit Style: Dual Rear Exit
• Material: 304 Stainless Steel
• Performance: Up to 28% flow increase over stock
• Installation: Bolt-on; no welding required
• Warranty: Limited Lifetime Warranty
• Manufacturing: Made in the U.S.A.
• Manufacturer Part Number: 21001BLK

Fits 2018-2023 Ford Mustang GT and GT Premium Fastback models (5.0L).

This Corsa Performance 3-inch cat-back exhaust system (MPN: 21001) is engineered specifically for the S550 Mustang GT to provide a significant increase in flow while maintaining the vehicle's factory active valve functionality. Constructed from premium 304 stainless steel, this system features mandrel-bent tubing to eliminate restrictions and provide a custom-tuned exhaust note that ranges from Touring to Xtreme. The dual rear exit design is finished with 4-inch dual-walled polished stainless steel tips for a refined, aggressive look.

• 304 stainless steel construction for maximum corrosion resistance
• 3-inch mandrel-bent piping maximizes exhaust gas velocity
• Maintains factory Quiet Start functionality and active valve control
• Flows 17% better than stock with valves open and 28% better with valves closed
• Direct bolt-on installation with no welding required
• Dual-walled 4-inch polished stainless steel tips
• Includes detailed full-color printed instructions
• Manufactured in the USA
• Manufacturer Part Number: 21001

Fits 1997-2004 Chevrolet Corvette Base, Z06, 50th Anniversary Edition, and Indianapolis 500 Pace Car models (5.7L V8).

The Corsa Xtreme Cat-Back Exhaust system with integrated XO-pipe is engineered to deliver an aggressive, high-performance exhaust note for the C5 Corvette without the cabin resonance typical of aftermarket systems. Utilizing Corsa's patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates drone-inducing frequencies during cruising, ensuring a comfortable interior environment while maintaining a raw, powerful sound under acceleration.

Constructed entirely from premium 304 stainless steel, this system provides superior corrosion resistance and a significant weight reduction compared to the factory exhaust components. The precise bolt-on design allows for a straightforward installation using existing factory mounting points, requiring no welding or permanent vehicle modifications.

• Series: Xtreme Cat-Back + XO Exhaust
• Material: 304 Stainless Steel
• Finish: Polished
• Technology: Patented No-Drone RSC (Reflective Sound Cancellation)
• Installation: Bolt-on design; no welding required
• Weight: Lighter than factory OE system
• Origin: Made in the U.S.A.
• Manufacturer Part Number: 14962

Each kit includes the full exhaust assembly, all necessary hardware, and detailed instructions for a complete installation.

Fits 2010-2013 Chevrolet Camaro SS Convertible models equipped with the 6.2L V8 engine and manual transmission.

The Corsa Sport Cat-Back Exhaust system (MPN: 14954) with integrated XO-Pipe is engineered to deliver an aggressive exterior sound profile without sacrificing interior comfort. Utilizing patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates the low-frequency resonant frequencies that cause cabin drone during cruising. The result is a refined experience at highway speeds and a powerful, high-performance growl under heavy throttle.

Built for durability and flow, the system is constructed from premium 304 stainless steel with mandrel-bent tubing to reduce backpressure. The bolt-on design ensures a precision fit to factory mounting points, requiring no welding for installation. Each kit comes complete with polished tips and all necessary hardware for a professional-grade upgrade.

• Patented RSC Technology ensures a drone-free experience at cruise
• 304 stainless steel construction for superior corrosion resistance
• Custom-tuned aggressive Sport exhaust note
• Includes XO-Pipe for improved flow and balance
• Direct bolt-on installation; no welding required
• Lighter than the factory exhaust system
• Made in the U.S.A.
• Manufacturer Part Number: 14954

Fits 2008-2017 Toyota Sequoia Limited, Platinum, and SR5 (5.7L V8).

The Corsa Performance Touring Series Cat-Back Exhaust system is engineered to provide an aggressive exhaust note under acceleration without the cabin drone typically associated with aftermarket systems. Utilizing patented Reflective Sound Cancellation (RSC) technology, this system targets and eliminates specific resonance frequencies to ensure a quiet, comfortable interior during cruising. Constructed from premium 304 stainless steel, this exhaust improves flow by 60% over the factory system, increasing efficiency and reducing weight. The system is finished with 4-inch dual-walled black stainless steel tips for a custom look.

• Patented RSC technology provides a drone-free experience at cruise
• Flows 60% better than the stock exhaust for improved performance
• Mandrel-bent 304 stainless steel construction for maximum corrosion resistance
• 4-inch dual-walled black stainless steel tips
• Easy bolt-on installation with no welding required
• Lighter overall weight compared to the factory exhaust
• Includes detailed instructions and all necessary hardware
• Manufacturer Part Number: 14573BLK
• Made in the U.S.A.

Fits 2007-2008 Chevrolet Avalanche, Suburban 1500, and GMC Yukon XL 1500 (5.3L V8).

Upgrade your vehicle's performance and acoustic profile with the Corsa Sport Cat-Back Exhaust System (Part #14246). Engineered with Corsa's patented Reflective Sound Cancellation (RSC) technology, this system is specifically tuned to eliminate interior drone at cruising speeds while delivering a deep, aggressive exhaust note under acceleration. The straight-through design maximizes exhaust gas velocity and reduces backpressure for improved efficiency.

Constructed entirely from premium 304 stainless steel, this system is built to withstand corrosion and high-heat environments. It features mandrel-bent tubing that flows 70% better than the factory exhaust and provides a 10 lbs. weight reduction over stock. The system is finished with dual-walled polished stainless steel tips for a custom, high-end appearance. This is a direct bolt-on kit that utilizes factory mounting points, requiring no welding for installation.

• Patented RSC Technology ensures a drone-free experience during cruise
• Straight-through design flows 70% better than stock components
• 10 lbs. weight savings over the factory exhaust system
• Premium 304 stainless steel construction for maximum durability
• Dual walled polished stainless steel tips for heat resistance and style
• Simple bolt-on installation with no welding required
• Includes all necessary hardware and detailed instructions
• Proudly manufactured in the U.S.A.

Fits 2023-2025 Ford F-150 Raptor models.

The Borla ATAK Mid-Section exhaust system is engineered to provide an aggressive, race-inspired sound for your Ford Raptor without interior cabin drone. This true dual 3-inch system is constructed from high-quality T-304 stainless steel, offering superior corrosion resistance and durability over standard T-400 series alternatives. It is designed to integrate seamlessly with the factory active exhaust valves, allowing you to retain full control over your vehicle's exhaust modes.

This system features Borla’s patented SwitchFire technology, which eliminates the turbulent center intersection of a standard X-pipe to better blend combustion pulses for improved performance and a custom sound. Combined with the Polyphonic Harmonizer—which uses specific pipe diameters and lengths to create a rich, full-bodied note—this mid-section delivers the ultimate acoustic experience. This part is designed for use with Borla 60727-series tailpipes (60727BC, 60727CB, 60727CFBA) or the original equipment (O.E.) tailpipes.

• 3-inch true dual design with precision mandrel bends for maximum flow
• Aggressive ATAK sound level with zero drone
• Integrated active exhaust valves to maintain factory valve functionality
• Patented SwitchFire and Polyphonic Harmonizer technology
• Premium T-304 stainless steel construction
• CNC manufactured for an accurate, bolt-on fit
• Million Mile Warranty
• Manufacturer Part Number: 60737

Fits select 1999-2007 Chevrolet Silverado 1500 and GMC Sierra 1500 (4.8L / 5.3L), including Classic models.

Experience the signature Borla "sound of power" with this precision-engineered cat-back exhaust system. More than just a cosmetic upgrade, this system acts as a communication conduit between driver and machine, providing critical acoustic feedback of engine RPM. This sensory input assists with gear selection and throttle management, allowing you to stay precisely within the powerband during spirited driving.

Borla engineers utilize patented technology, computer modeling, and extensive prototyping to tune each system to the specific personality of the vehicle. Constructed from high-quality steel, this system replaces the factory exhaust to deliver unrivaled clarity and a high-performance soundtrack that echoes from the speedway to the highway.

• Direct-fit cat-back exhaust system for GMT800-platform trucks
• Patented technology tuned for optimal 4.8L and 5.3L V8 performance
• Provides clear acoustic feedback to aid in rev-matching and gear selection
• Durable steel construction engineered for longevity and flow
• Manufacturer Part Number: 14824

Fits select 2021-2024 Jeep Grand Cherokee L (5.7L) Overland, Summit, and Summit Reserve models. This 2.5" diameter True Dual Cat-Back system is engineered to enhance the HEMI V8 performance while delivering the signature Borla S-Type sound profile with a no-drone interior experience.

Construction features premium high-quality T-304 stainless steel throughout, offering superior corrosion resistance compared to T-400 series alternatives. The system includes a Merge X-Pipe to balance exhaust pulses and increase velocity, combined with ultra-smooth mandrel-bent tubing to ensure maximum flow. The exit design features 2.25" tail pipes specifically designed to align with and reuse the Original Equipment (O.E.) valance-mounted exhaust tips for a clean, factory-integrated look.

• System Type: Cat-Back Exhaust
• Sound Level: S-Type (Aggressive yet refined)
• Pipe Diameter: 2.5" into dual 2.25" outlets
• Material: T-304 Stainless Steel
• Muffler Type: Patented Straight-Through Multi-Core
• Exit: Dual Rear (Fits O.E. Valance/Tips)
• MPN: 140987

Note: This system does not include exhaust tips; it is designed to be used with the factory valance-mounted tips already installed on the vehicle.

Fits 2022-2026 Nissan Frontier (3.8L) including PRO-4X, PRO-X, S, SL, and SV models.

Maximize ground clearance and off-road capability with the Borla S-Type Cat-Back exhaust system. Engineered specifically for the Rock Crawler and Climber enthusiast, this 2.25-inch true dual system features a high-clearance design with turn-down tailpipes to prevent contact with obstacles during technical maneuvers. The included muffler features an internal H-pipe to optimize exhaust flow and scavenging, delivering the signature S-Type sound—a deep, aggressive performance note with zero cabin drone.

Built for the trail, the entire system is constructed from premium T-304 austenitic stainless steel, providing superior corrosion resistance and durability compared to 400-series steel. CNC manufacturing ensures a precise, bolt-on fitment to factory mounting points.

• High-clearance Rock Crawler design with dual turn-down tailpipes
• 2.25-inch True Dual T-304 stainless steel construction
• S-Type sound level: Aggressive performance tone with no drone
• Internal muffler H-pipe for increased exhaust velocity
• Brushed T-304 stainless steel turn-down tips with laser-etched Borla logo
• Direct bolt-on installation
• Million Mile Warranty
• Manufacturer Part Number: 140985

Fits 2023-2024 Honda Accord EX and LX (1.5L).

The Borla S-Type Cat-Back exhaust system (MPN: 140983) is engineered specifically for the 11th generation Honda Accord to deliver a sportier, more aggressive exhaust note than the factory setup. This system features Borla's patented straight-through and multi-core technology, which increases exhaust velocity for improved performance while maintaining a drone-free cruising experience for daily comfort.

Built from premium T-304 austenitic stainless steel, this exhaust is designed to resist corrosion and outperform standard T-400 series materials. The configuration utilizes 2.5-inch diameter piping that transitions into dual 2.25-inch pipes, ending in brushed turn-down exits behind the rear mufflers. The system includes an internal H-pipe within the front muffler to optimize sound quality and pressure balancing. Precision CNC manufacturing and ultra-smooth mandrel bends ensure an accurate bolt-on fit and maximum flow.

• T-304 austenitic stainless steel construction for superior durability
• S-Type sound level: aggressive, sporty tone without cabin drone
• 2.5" into dual 2.25" mandrel-bent piping for optimized flow
• Internal H-pipe integrated into the front muffler
• Dual brushed stainless steel turn-down exits
• Direct bolt-on fitment to factory mounting points
• Manufacturer Million-Mile Warranty

Fits 2022-2025 Honda Civic Sport (2.0L).

The Borla S-Type Cat-Back exhaust system is engineered to enhance the 2.0L Honda Civic Sport with a more aggressive, sporty sound profile while maintaining a drone-free cabin environment. This bolt-on system is constructed from premium T-304 austenitic stainless steel, providing superior corrosion resistance and long-term durability on the street. The system features 2.25-inch ultra-smooth mandrel-bent piping to optimize exhaust flow and power delivery.

This configuration is finished with a 4.5-inch black chrome on T-304 stainless steel tip for a high-end, stealthy aesthetic. Note: To maintain the finish of the black chrome tip, do not use metal polish; clean only with hot water and a microfiber cloth. Every system is precision-manufactured using CNC technology to ensure an exact fit to factory mounting points.

• System Type: Cat-Back
• Sound Level: S-Type (Sporty/Aggressive)
• Piping Diameter: 2.25"
• Tip Description: 4.5" Black Chrome on T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Exit Style: Single Right Rear Exit
• Manufacturer Part Number: 140941BC
• Warranty: Borla Million-Mile Warranty

Fits select 2021-2025 Ford F-150 models (2.7L / 3.5L) including XL, XLT, Lariat, King Ranch, and Platinum trims. This system excludes 3.5L V6 PowerBoost, Raptor, and Black Appearance Package configurations.

The Borla Touring Cat-Back exhaust system provides a mellow, deep exhaust note for the 2021-2025 Ford F-150, delivering a subtle increase in volume over the factory system without any cabin drone. Engineered with a 3-inch inlet leading into dual 2.25-inch pipes, this system features a dual side exit (passenger side) that replaces the factory single-exit tailpipe with high-performance T-304 stainless steel construction.

Built from premium austenitic T-304 stainless steel, this system utilizes ultra-smooth mandrel bends to maximize exhaust velocity and flow. The kit is finished with dual 4-inch round black chrome tips. Note: Do not use Borla Stainless Steel Polish (p# 21499) on black chrome tips; clean only with hot water and a microfiber cloth to preserve the finish.

• System Type: Cat-Back Exhaust
• Sound Level: Touring (Mellow)
• Material: T-304 Stainless Steel
• Tubing Diameter: 3" into dual 2.25"
• Tip Description: Dual 4" Round Black Chrome T-304 Stainless Steel
• Exit Style: Dual Side Exit (behind passenger rear wheel)
• Fitment Notes: Fits Crew Cab/Short Bed (5' 6" bed) and Extended Cab/Standard Bed (6' 6" bed).
• Adapter Required: Use 60556 for Crew Cab/Standard Bed (157.2" WB); Use 60564 for Extended Cab/Long Bed (164.1" WB).
• MPN: 140870BC
• Warranty: Million Mile Warranty

Fits 2021-2026 Chevrolet Tahoe Premier (5.3L V8) models equipped with factory quad tips ONLY.

Enhance the performance and acoustic profile of your vehicle with the Borla Touring Cat-Back exhaust system. Engineered specifically for the 5.3L V8 engine, this system utilizes a 3-inch inlet into dual 2.75-inch piping to increase exhaust velocity and flow. The Touring series muffler provides a mellow, deep exhaust note that delivers the signature Borla sound without any interior drone, making it ideal for daily driving and long-distance towing.

This system is constructed from premium T-304 stainless steel, offering superior corrosion resistance and durability compared to standard T-400 series or aluminized steel. CNC-machined mandrel bends ensure consistent pipe diameter throughout for maximum flow. The exit features dual 4-inch round black chrome tips on each side for a striking, custom appearance. Note: To maintain the black chrome finish, clean with hot water and a microfiber cloth only; do not use stainless steel polish.

• System Type: Cat-Back Exhaust
• Series: Touring (No-Drone Sound)
• Piping Diameter: 3.0" into dual 2.75"
• Tip Description: Quad 4" Round Black Chrome on T-304 Stainless Steel
• Exit Style: Split Rear Exit
• Material: T-304 Stainless Steel
• MPN: 140856BC
• Warranty: Million-Mile Warranty

Fits select 2020-2025 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD (6.6L gas engine). This Borla S-Type Cat-Back™ exhaust system (MPN 140833BC) is engineered to provide an aggressive, high-performance exhaust note with zero drone in the cabin. Constructed from premium T-304 stainless steel, this system uses 3.5-inch diameter mandrel-bent tubing to optimize exhaust velocity and flow over restrictive factory setups.

The system is finished with a 5-inch round black chrome on T-304 stainless steel tip for a sleek, durable aesthetic. Please note that Borla Stainless Steel Polish (p# 21499) should not be used on these black chrome tips; cleaning with hot water and a microfiber cloth is recommended to maintain the finish.

• System Type: Cat-Back™ Exhaust
• Series: S-Type
• Tubing Diameter: 3.5"
• Tip Size: 5" Round
• Tip Finish: Black Chrome
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140833BC
• Warranty: Million-Mile Warranty

Note: This system fits gasoline engines only (EXCEPT Diesel). It is designed for single rear wheel vehicles (EXCEPT Dual Rear Wheels). For Crew Cab models with a Long Bed (8' 2", 172" Wheelbase), extension pipe 60713 is required for installation.

Fits 2020-2025 Ford Explorer Base, Limited, ST-Line, Timberline, and XLT models equipped with the 2.3L EcoBoost engine.

Borla’s S-Type Cat-Back exhaust system (PN 140824) is engineered to provide a balanced, sporty acoustic profile for the Ford Explorer 2.3L without introducing cabin drone. This system utilizes a 2.5-inch inlet that transitions into dual 2.25-inch piping, optimizing exhaust flow and velocity. Built for longevity and performance, the assembly is constructed from premium T-304 stainless steel to resist corrosion and includes brushed turndown tips for a clean, under-bumper look.

The system features ultra-smooth mandrel bends to minimize restriction and increase power across the RPM range. Designed as a direct bolt-on replacement for the factory exhaust, it mounts to existing OE hang points for a straightforward installation. This S-Type system delivers the aggressive growl Borla is known for while maintaining daily-driver comfort.

• System Type: Cat-Back Exhaust
• Sound Level: S-Type (Aggressive/Sporty)
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.5" into dual 2.25"
• Tip Style: 2.25" Brushed Turndown Tips
• Installation: Bolt-on factory mounting points
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 140824

Fits the 2025 Ram 1500 RHO (3.0L I6 Twin Turbo).

The AWE Tuning 0FG Dual Rear Exit Cat-Back Exhaust is a true dual, full 3-inch system engineered to maximize the performance and sound profile of the Hurricane-powered Ram RHO. Constructed from US-sourced, CNC mandrel-bent .065-wall T304L stainless steel, this system features equal-length front pipes and a bespoke AWE X-pipe designed specifically to produce a refined, rasp-free tone. To maintain cabin comfort during highway cruising, the system utilizes AWE’s patented 180 Technology® to cancel out drone-prone frequencies while maintaining a straight-through flow design.

For a perfect aesthetic finish, the system terminates in dual 5-inch double-walled, slash-cut tips finished in Diamond Black. The tip outlets incorporate ball socket joints, allowing for precise adjustment and centered fitment within the factory bumper cutouts. This exhaust is a direct bolt-on upgrade that requires no cutting for installation.

• True dual, full 3-inch cat-back configuration (MPN: 3015-33630)
• Handcrafted from U.S.-sourced T304L stainless steel
• Patented 180 Technology® drone-canceling solution
• 5-inch double-walled, slash-cut Diamond Black tips
• Bespoke X-pipe for a smooth, aggressive exhaust note
• Ball socket joints for perfect tip alignment
• Direct bolt-on installation; no cutting required
• AWE No CEL (Check Engine Light) Guarantee
• Lifetime Warranty

This Part Fits:

Fits 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L V8) equipped with factory single side-exit exhaust. This system is designed for the 147.4-inch wheelbase, fitting Extended Cab Standard Bed (78.8") and Crew Cab Short Bed (69.3") configurations. Note: Crew Cab Standard Bed (157" WB) models require adapter 60708.

Experience the Borla "Sound of Power" without the interior cabin drone. The Touring series is specifically tuned to provide a mellow, deeper-than-stock exhaust note that is perfect for daily driving and towing. This cat-back system is engineered from premium T-304 austenitic stainless steel, providing superior corrosion resistance and durability compared to T-400 series alternatives.

• System Type: Cat-Back
• Piping Diameter: 3.0-inch mandrel-bent tubing
• Tip Description: 4-inch round black chrome on T-304 stainless steel
• Exit Style: Single side exit behind passenger rear wheel
• Patented straight-through and multi-core technology for optimized flow
• Precision CNC manufacturing ensures a direct-fit, bolt-on installation
• Manufacturer Part Number: 140793BC

Maintenance Note: To preserve the finish of the black chrome tip, clean only with hot water and a microfiber cloth. Use of stainless steel polish is not recommended for this specific finish.

Fits 2014-2021 Jeep Grand Cherokee 4DR models equipped with the 3.6L V6 engine, All-Wheel Drive (AWD), and automatic transmission.

Give your Jeep Grand Cherokee the "Borla Sound of Power" with the S-TYPE Cat-Back exhaust system. Engineered for drivers who want an aggressive exhaust note under acceleration without excessive drone during highway cruising, this system features Borla’s patented straight-through and multi-core technology. This design increases exhaust velocity to improve engine efficiency and throttle response.

Constructed entirely from premium T-304 stainless steel, this system outlasts T-400 series alternatives in corrosion resistance and durability. The 2.50-inch tubing is CNC-manufactured with ultra-smooth mandrel bends to maintain maximum flow throughout the system. The exit is finished with a striking black chrome on T-304 stainless steel tip for a high-end aesthetic.

• System Type: Cat-Back Exhaust
• Series: S-TYPE
• Tubing Diameter: 2.50"
• Tip Description: Black Chrome on T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140748BC
• Warranty: Borla Million-Mile Warranty

Care Note: Do NOT use Borla Stainless Steel Polish (p# 21499) on these black chrome tips. To maintain the finish, clean only with hot water and a soft microfiber cloth.

Fits 2017-2023 Chevrolet Camaro ZL1 (6.2L) models.

The Borla ATAK (Abusive Tongue and Cheek) Cat-Back exhaust system is specifically engineered to maximize the acoustic profile and exhaust velocity of the 6.2L Chevrolet Camaro ZL1. This system is designed for enthusiasts seeking the highest decibel level in the Borla lineup while maintaining a crisp, performance-oriented tone without distortion. It features integrated NPP valves to retain the factory dual-mode exhaust functionality.

Built for durability and flow, this system is constructed from premium T-304 stainless steel, which offers superior corrosion resistance compared to 400-series aluminized steel. The 140727 kit includes a specialized Merge X-Pipe for balanced exhaust scavenging and ultra-smooth mandrel-bent tubing to minimize backpressure. The system is finished with quad 4-inch polished T-304 stainless steel tips for a refined aesthetic.

Note: Installation requires cutting the factory O.E. exhaust system. This specific configuration is not recommended for use on convertible models.

• System Type: Cat-Back Exhaust
• Sound Level: ATAK (Most Aggressive)
• Material: T-304 Stainless Steel
• Tubing: Mandrel-Bent
• Tip Description: 4-inch Polished T-304 Stainless Steel
• Exit Style: Dual Split Rear Exit
• Features: Integrated NPP Valves and Merge X-Pipe
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 140727

Fits 2015-2022 Dodge Challenger SRT Hellcat, Demon, Redeye, Jailbreak, and Super Stock models (6.2L).

This Borla S-TYPE Cat-Back exhaust system (MPN 140642) is engineered to deliver an aggressive growl without the interior drone common in high-performance setups. The system features a 3-inch diameter layout with a Merge X-Pipe to balance exhaust pulses and increase velocity for improved power and throttle response. Constructed from premium T-304 austenitic stainless steel, this system offers superior durability and corrosion resistance compared to T-400 series alternatives.

This configuration includes functioning Multi-Displacement System (MDS) valves to maintain factory electronic exhaust valve operation. It is designed to work with the factory valance and does not include exhaust tips, allowing you to retain the original factory appearance.

• 3-inch diameter mandrel-bent T-304 stainless steel tubing for maximum flow
• Merge X-Pipe for optimized performance and a smooth exhaust note
• Equipped with functioning MDS valves to integrate with factory electronics
• S-TYPE sound profile provides a deep tone with no interior drone
• Designed for use with factory tips and rear valance
• High-precision CNC manufacturing ensures an accurate fit

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including High Country, LTZ, Denali, and SLT trims with a 143.5-inch wheelbase.

The Borla ATAK (Acoustically Tuned Applied Kinetics) Series Cat-Back exhaust is designed for the enthusiast who demands the most aggressive sound level in the Borla catalog. This system provides a high-clarity, high-volume exhaust note that delivers acoustic feedback to the driver without sacrificing engine performance. Engineered for a direct fit, this system bolts to the factory mounting points behind the catalytic converter.

• Series: ATAK (Acoustically Tuned Applied Kinetics)
• Exit Configuration: Dual Rolled Side Exit (behind the rear wheel)
• Wheelbase: 143.5-inch (Extended Cab/Standard Bed or Crew Cab/Short Bed)
• Construction: High-quality T-304 stainless steel
• Manufacturer Part Number: 140577

By utilizing computer modeling and extensive prototyping, Borla engineers have tuned this system specifically for the 2014-2018 GM 1500 platform to ensure the exhaust note reflects the truck's performance capabilities while maintaining durability and flow efficiency.

Fits select 2015-2020 Chevrolet Suburban, GMC Yukon, and GMC Yukon XL models equipped with the 5.3L V8 engine.

The Borla Touring Cat-Back exhaust system (MPN: 140558) is engineered for drivers who want the performance of a high-flow exhaust with a mellow, neighbor-friendly sound profile. This system features a 2.75-inch front pipe with a high-quality integrated flex joint that transitions into dual 2.25-inch tailpipes, exiting on the same side behind the rear wheel. Each tailpipe is finished with a 4-inch round bright chrome T-304 stainless steel tip for a premium appearance.

Constructed entirely from premium T-304 stainless steel, this system offers superior corrosion resistance compared to T-400 series alternatives. Borla utilizes ultra-smooth mandrel bends and CNC manufacturing to ensure maximum exhaust velocity and a precise fit to factory mounting points. The patented straight-through, multi-core muffler design reduces backpressure to improve efficiency and power without the drone associated with typical performance exhausts.

• System Type: Cat-Back Exhaust
• Sound Level: Touring (Mellow)
• Exit Style: Dual Same Side Behind Rear Wheel
• Tubing Diameter: 2.75" into dual 2.25"
• Tip Size: 4" Round
• Tip Finish: Bright Chrome
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 140558
• Warranty: Million-Mile Warranty

Fits 2011-2014 Ford Mustang Base models equipped with the 3.7L engine.

The Borla S-Type Cat-Back exhaust system (MPN 140375) is engineered to optimize exhaust velocity and flow for the 3.7L V6 Mustang. Utilizing patented straight-through and multi-core technology, this system provides the signature Borla "Sound of Power" while maintaining street-ready performance. Every component is built from premium T-304 stainless steel, offering superior corrosion resistance compared to 400-series materials.

Precision CNC manufacturing and ultra-smooth mandrel bends ensure an accurate fit and maximum air volume. The system features bright chrome-finished T-304 stainless steel tips for a durable, high-luster appearance. This kit is a direct-fit upgrade designed to replace the restrictive factory exhaust components from the catalytic converter back.

• System Type: Cat-Back Exhaust
• Series: S-Type
• Material: T-304 Stainless Steel
• Tubing: Mandrel-bent
• Tip Finish: Bright Chrome
• Manufacturer Part Number: 140375
• Warranty: Borla Million-Mile Warranty

Fits 2004-2006 Jeep Wrangler and Wrangler Unlimited (4.0L).

The Banks Power Monster Exhaust system replaces the restrictive factory exhaust on your 2004-2006 Jeep Wrangler with a high-flow, 2.5-inch mandrel-bent stainless steel solution. Engineered to virtually eliminate backpressure from the catalytic converter back, this system utilizes a straight-through Monster muffler to deliver a 140% improvement in airflow—flowing 501.2 cfm at 1 psi compared to the stock 208.6 cfm. The result is improved efficiency, lower exhaust gas temperatures, and a throaty, authoritative exhaust note without excessive cabin drone.

Built from heavy-gauge stainless steel for long-term durability in off-road environments, the system features a supersized tailpipe and a mirror-polished chrome tip. For maximum performance gains, this system is designed to be paired with the Banks TorqueTube manifold.

• Material: Heavy-gauge mandrel-bent stainless steel
• Tubing Diameter: 2.5 inches
• Flow Rate: 501.2 cfm @ 1 psi (140% over stock)
• Muffler: Straight-through Monster muffler
• Tip: Polished Chrome stainless steel
• MPN: 51315
• Included: Monster muffler, tailpipe, chrome tip, and all necessary mounting hardware

Vehicle Fitment:

Fits select 2000-2003 Jeep Wrangler models including Rubicon, Sahara, Sport, X, and SE (4.0L).

The Banks Power 51313 Monster Exhaust System is engineered to replace the restrictive factory exhaust from the catalytic converter back. Featuring a heavy-duty 2-bolt flange for the catalytic converter connection, this system utilizes 2.5-inch mandrel-bent stainless steel tubing to maintain a constant diameter through every curve, significantly reducing backpressure and lowering exhaust gas temperatures. The straight-through Monster muffler provides an authoritative, civil exhaust note without the drone of lesser systems.

In rigorous flow testing, the Monster muffler outperformed stock units by 140%, flowing 501.2 cfm at 1 psi compared to the original equipment's 208.6 cfm. This dramatic improvement in airflow translates to better engine efficiency and power across the RPM range. The system is finished with a mirror-polished stainless steel tip for a professional, durable appearance.

• Replaces restrictive factory exhaust from the 2-bolt catalytic converter back
• 2.5-inch mandrel-bent stainless steel tubing for maximum airflow
• Straight-through Monster muffler flows 501.2 cfm at 1 psi (140% better than stock)
• Constructed from heavy-gauge stainless steel for long-term durability
• Includes mirror-polished chrome-finished stainless steel tip
• Includes all necessary mounting hardware for installation
• Manufacturer Part Number: 51313

Fits 2017-2026 Ford F-250 and F-350 Super Duty trucks (6.7L Power Stroke).

The Banks Power 49795 Monster Exhaust is a 5-inch DPF-back system engineered to maximize airflow and reduce exhaust backpressure on 2017-2026 Ford 6.7L Super Duty pickups. Constructed from heavy-duty constant-diameter mandrel-bent aluminized steel tubing, this system achieves an 82% reduction in backpressure compared to the factory exhaust. By streamlining flow, the Monster Exhaust helps the engine operate more efficiently while maintaining complete emissions compliance.

This system features the patented SideKick tip, finished in polished chrome. The massive tip design virtually eliminates backpressure after the DPF by utilizing a unique internal geometry that draws in cool ambient air to mix with hot exhaust gases. The 5-inch diameter tubing is designed for a precise fit across multiple wheelbases, including Single Cab, Crew Cab, Short Bed, and Long Bed configurations, and is fully compatible with Dually models.

• Manufacturer Part Number: 49795
• System Type: DPF-Back, Single Exit
• Tubing Diameter: 5-inch constant-diameter mandrel-bent
• Material: Aluminized Steel
• Tip Style: Patented SideKick Polished Chrome
• Performance: 82% less backpressure than stock
• Fitment: Fits SC/SB, CC/SB, SC/LB, and CC/LB models including Dually

Fits 2022-2026 Audi RS3 (Base).

The AWE SwitchPath Cat-Back Exhaust provides a dual-personality soundtrack for the 8Y RS3, engineered specifically to enhance the unique acoustics of the turbocharged 5-cylinder engine. This system is handcrafted from U.S.-sourced T304L stainless steel, utilizing a 3-inch lead-in that transitions to a 2.5-inch single-pass design. The driver-side muffler is precision-tuned for a sophisticated tone, while the valved passenger-side outlet integrates directly with the factory electronics.

By retaining the factory valve behavior, the SwitchPath exhaust obeys ECU commands based on throttle input, engine speed, and your selected Drive mode. This allows for quiet operation during morning commutes and an aggressive, burbling exhaust note when clicking into Dynamic mode. The CNC mandrel-bent .065-inch wall tubing ensures maximum flow and a perfect bolt-on fit to factory mounting points.

• CNC mandrel-bent 3-inch and 2.5-inch T304L stainless steel construction
• .065-inch wall thickness for maximum durability
• Retains factory valve logic and cabin button integration
• 5-cylinder-specific acoustic tuning for a signature RS sound
• 50-state emissions-compliant cat-back design
• Direct bolt-on installation with factory-like fitment
• AWE No CEL Guarantee and Lifetime Warranty
• Manufacturer Part Number: 3025-31389