Fits 2020-2025 Chevrolet Corvette Stingray (6.2L).

The Borla S-Type Cat-Back exhaust system (140838) provides a powerful, balanced sound with a deep tone for the C8 Corvette, engineered specifically to eliminate interior drone. This 3-inch inlet system utilizes Borla’s patented SwitchFire technology, which replaces the standard X-pipe to merge combustion pulses for optimized performance and an aggressive exhaust note. Combined with the Polyphonic Harmonizer, which uses varied pipe lengths and diameters, this system delivers a clean, full-bodied sound.

Built from premium T-304 stainless steel, this exhaust includes integrated heat shielding to protect critical vehicle components from heat soak. This configuration features quad 4-inch round bright chrome tips (4in x 4.75in) and is designed to integrate with factory AFM ('20-'21), DFM ('22-'25), and NPP dual-mode valves.

• High-quality T-304 stainless steel construction for corrosion resistance
• Patented SwitchFire and Polyphonic Harmonizer technology
• Supports AFM/DFM and NPP valve functionality
• Includes quad 4-inch bright chrome tips
• Strategic heat shielding included for component protection
• Backed by Borla's Million Mile Warranty

Note: This system is only for use on vehicles equipped with O.E. NPP exhaust. After installation, the valve actuators must be re-calibrated according to GM Document ID 5406413. This system ships in two boxes.

Fits select 2015-2020 Ford F-150 models (3.5L), including XL, XLT, Lariat, King Ranch, Platinum, Limited, and Police/SSV trims. Note: Does not fit Raptor models.

The Borla Touring Series Cat-Back Exhaust is engineered for F-150 owners seeking an upgraded exhaust note without interior drone. This system provides a mellow, deep sound while improving exhaust velocity through patented straight-through and multi-core technology. Constructed from premium T-304 stainless steel, it offers superior corrosion resistance over 400-series alternatives.

This side-exit system features a 3-inch inlet pipe that splits into dual 2.25-inch pipes, terminating in 4-inch black chrome angle-cut tips. To maintain the black chrome finish, clean these tips with hot water and a microfiber cloth; polishing compounds are not recommended.

• Full T-304 stainless steel construction for maximum durability
• Ultra-smooth mandrel-bent piping ensures optimal flow and power
• Touring sound level: Mellow tone with no cabin drone
• Includes 4-inch black chrome on T-304 stainless steel tips
• Precision CNC manufactured for a bolt-on fit
• Manufacturer Part Number: 140617BC
• Borla Million-Mile Warranty

Configuration Notes: Crew Cab with Standard Bed (156.8-inch wheelbase) requires Adapter 60556. Extended Cab with Long Bed (163.7-inch wheelbase) requires Adapter 60564.

Fits 2008-2014 Subaru Impreza WRX and WRX STI models. This Borla Performance cat-back exhaust (PN 140312) is engineered to replace the restrictive factory system with a high-flow, 3-inch diameter T-304 stainless steel setup. By upgrading the piping from 2.5 inches to 3 inches and utilizing a patented straight-through muffler design, this system reduces backpressure to unlock the full potential of the turbocharged EJ-series engine, especially on vehicles with Stage 1 or Stage 2 ECU tuning.

Designed for both street and performance use, Borla fabricators tucked the muffler assembly 1.75 inches higher than the original equipment (OE) unit. This provides crucial ground clearance for lowered vehicles or rough terrain while improving rear aerodynamics. The system also reduces vehicle weight by approximately 8 lbs compared to stock. It features quad 3.5-inch double-walled, rolled-edge polished tips that deliver the signature Borla rumble without internal baffles or chambers that rob power.

• Manufacturer Part Number: 140312
• System Type: Cat-Back
• Piping Diameter: 3.0" (76mm)
• Tip Diameter: 3.5" Quad Exit
• Material: T-304 Stainless Steel
• Muffler Design: Patented straight-through technology
• Clearance: 1.75" gain over factory exhaust
• Weight Reduction: Approx. 8 lbs lighter than OE
• Installation: Bolt-on with included hardware

Fits 2011-2012 Ford Mustang GT and Boss 302 (5.0L).

The Borla ATAK (Acoustically-Tuned Applied Kinetics) Series Rear Section Exhaust is engineered for high-performance purists who demand the highest decibel levels in Borla's street-legal lineup without sacrificing sound clarity. Unlike conventional loud exhausts that can suffer from distortion or cabin drone, this system is specifically tuned to the 5.0L Coyote's acoustical properties, delivering a focused, aggressive exhaust note throughout the entire RPM range.

Constructed from premium T-304 austenitic stainless steel, this axle-back system features ultra-smooth mandrel-bent piping to ensure maximum flow and power retention. The system is finished with mirror-polished, bright chrome tips for a refined look that matches its high-volume performance. Handmade in the USA, every Borla system is built to last and backed by a Million-Mile Warranty.

• Manufacturer Part Number: 11791
• Series: ATAK (Acoustically-Tuned Applied Kinetics)
• Configuration: Rear Section (Axle-Back)
• Material: T-304 Austenitic Stainless Steel
• Finish: Bright Chrome Tips
• Construction: Mandrel-Bent Tubing
• Warranty: Million-Mile Warranty

Fits 1987-2001 Jeep Cherokee models equipped with the 4.0L inline-six engine.

The Banks Power Monster Exhaust System replaces the restrictive factory exhaust from the catalytic converter back with heavy-gauge, mandrel-bent stainless steel. Engineered to virtually eliminate backpressure, this system improves engine efficiency and lowers exhaust gas temperatures (EGTs). At the core is the straight-through Monster muffler, which delivers an authoritative, civil exhaust note while outperforming the industry standard for airflow.

In comparative flow testing, the Banks Monster muffler achieved 543.2 cfm at 1 psi—a 108% improvement over the stock exhaust's 260.0 cfm. The constant-diameter 2.5-inch tailpipe ensures maximum airflow, providing the engine with the breathing room necessary for increased power and better fuel economy.

• Mandrel-Bent Construction: 2.5-inch stainless steel tubing maintains its diameter through every bend to prevent restriction.
• Monster Muffler: Straight-through performance design provides the industry's least restrictive flow and a throaty sound.
• Engineered Efficiency: Slashes backpressure from the catalytic converter back to optimize 4.0L performance.
• Heavy-Duty Materials: Constructed from heavy-gauge stainless steel for long-term durability and corrosion resistance.

Specifications:

• Tubing Diameter: 2.5 inches
• Muffler Flow: 543.2 cfm @ 1 psi
• Material: Stainless Steel
• Manufacturer Part Number: 51360

Included in the Box: Stainless Monster muffler, stainless 2.5-inch mandrel-bent tailpipe, and necessary mounting hardware. Note: This system does not include an exhaust tip.

Fits 1997-1999 Jeep Wrangler Sahara, SE, and Sport models (4.0L).

The Banks Power Monster Exhaust System (51312-B) replaces your restrictive factory exhaust with a high-flow, 2.5-inch mandrel-bent stainless steel configuration. Designed to virtually eliminate backpressure, this system features a straight-through Monster muffler that flows up to 501.2 cfm at 1 psi—a 140% improvement over the 208.6 cfm stock flow rate. This increased capacity improves efficiency and provides an authoritative, civil exhaust note while lowering exhaust gas temperatures.

Built for durability on and off the trail, the system is constructed from heavy-gauge stainless steel and uses a slip-fit connection at the catalytic converter outlet. The system is finished with a 2.5-inch stainless steel tailpipe and a premium Cerakote Black tip.

• 2.5-inch mandrel-bent stainless steel tubing for maximum airflow
• Straight-through Monster muffler flows 501.2 cfm at 1 psi (140% better than stock)
• Constructed from heavy-gauge stainless steel for maximum corrosion resistance
• Includes Cerakote Black stainless steel exhaust tip
• Slip-fit design for easy connection to the catalytic converter outlet
• Includes all necessary mounting hardware for installation

Includes: Stainless Steel Monster muffler, 2.5-inch stainless steel tailpipe, Cerakote Black tip, and mounting hardware.

Fits 1998-2006 Toyota Land Cruiser and Lexus LX470 (4.7L).

The BRExhaust 106-0176 Direct-Fit Replacement Exhaust Kit provides a high-quality, bolt-on solution for restoring your vehicle's exhaust system. Constructed from durable aluminized steel, this kit replaces all components from behind the catalytic converter. Unlike many aftermarket options that use restrictive crush-bent tubing, BRExhaust utilizes precision mandrel-bent pipes to maintain consistent diameter and facilitate superior exhaust flow.

Designed as a true DIY solution, the multi-piece system fits precisely to factory mounting points without the need for specialized bending or welding. This kit includes all necessary gaskets and hardware to ensure a leak-free seal and professional-grade installation right out of the box.

• Direct-fit replacement for factory exhaust components
• Mandrel-bent aluminized steel for corrosion resistance and flow
• Complete bolt-on installation; no welding or fabrication required
• Maintains original emissions equipment compliance
• Includes (4) Ring Gaskets and (1) Ball Flare Clamp
• Interchanges with OE: 17403-50150, 17403-50151, 17405-50030, 17450-50050, 17450-50070
• Manufacturer Part Number: 106-0176
• 2-year unlimited mileage warranty

Fits 2017-2021 Honda Civic Type R and 2021 Honda Civic Type R Limited Edition.

The AWE Touring Edition Exhaust provides the ideal balance of straight-pipe performance and a refined, deep exhaust note for the FK8 K20 engine. This system is a full 3-inch downpipe-back configuration, featuring AWE’s patented 180 Technology drone-canceling solution. This technology uses a precision-engineered Helmholtz resonator to target and eliminate drone-prone frequencies at highway speeds while maintaining an aggressive, rasp-free soundtrack under heavy throttle.

Construction consists of handcrafted, CNC mandrel-bent U.S.-sourced T304L stainless steel with a .065-inch wall thickness. This specific kit includes the DualPhase mid pipe, which utilizes additional Helmholtz properties to keep frequencies in check even when paired with high-flow aftermarket downpipes. The system is designed with an integrated 3-inch front pipe, ensuring a consistent diameter from the downpipe flange to the triple 4.5-inch double-walled, slash-cut diamond black tips. As a direct bolt-on solution, it requires no cutting or welding for installation.

• Direct bolt-on for 2017-2021 Civic Type R (FK8)
• Max gains of 5 hp and 9 lb-ft of torque at the wheels
• 3-inch CNC mandrel-bent T304L stainless steel construction
• Patented 180 Technology drone-canceling resonator
• Includes DualPhase mid pipe and integrated 3-inch front pipe
• Triple 4.5-inch double-walled slash-cut tips in Diamond Black
• Bespoke stamped stainless steel trident tip merge
• AWE No CEL and Perfect Fitment Guarantees
• Manufacturer Part Number: 3015-43000

Fits select 2024-2026 Toyota Tacoma SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, Trailhunter, PreRunner, and Limited models.

AWE’s cat-back exhaust system for the 4th Generation Toyota Tacoma is engineered to deliver a signature exhaust note without cabin drone. Handcrafted from U.S.-sourced .065" wall T304L stainless steel, this system utilizes CNC mandrel-bent 3" and 2.5" piping for optimal flow. The mid-pipe features AWE’s patented 180 Technology®, a drone-canceling design that ensures maximum highway comfort while providing a refined tone under throttle. Built for the trail and the street, this system accommodates the factory retractable BedStep® and provides ample clearance for the gas tank.

• Construction: Mandrel-bent 3" and 2.5" U.S.-sourced T304L stainless steel (.065" wall)
• Tips: Dual 4.5" double-walled slash-cut Diamond Black tips
• Bespoke resonated mid-pipe with patented 180 Technology® drone cancellation
• Installation: Direct bolt-on with factory-matched inlet flange; no cutting required
• Compliance: 50-state emissions-compliant cat-back configuration
• Compatibility: Designed to clear the factory gas tank and retractable BedStep®
• Includes: Wheelbase extensions for all applicable configurations
• Manufacturer Part Number: 3015-33254
• AWE Lifetime Warranty and No CEL Guarantee

Fits select 2019-2025 Ram 2500 and 3500 models (6.7L).

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17912 is engineered to enhance the presence and performance of your 6.7L Cummins-powered Ram. Constructed from weight-optimized, corrosion-resistant stainless steel, this 5-inch system features mandrel-bent main piping designed for maximum flow and durability. A muffler-delete design provides the signature MagnaFlow sound while maintaining emissions legality, delivering a mild interior cabin volume and a moderate exterior exhaust note.

This direct-fit kit is produced using CNC precision robotic manufacturing for an exact fit to your factory mounting points. The system terminates in a single passenger-side rear exit, capped with a massive 6-inch polished, welded-on, single-wall angle-cut rolled-edge intercooled tip. This design provides an aggressive look while managing heat at the exit point.

• System Type: Filter-Back
• Series: Pro Series
• Piping Diameter: 5 in.
• Exit Style: Single Passenger Side Rear
• Tip Diameter: 6 in.
• Tip Finish: Polished
• Material: Stainless Steel
• Muffler Type: Muffler Delete
• Installation: Bolt-on Direct-Fit
• MPN: 17912

Fits 2013-2019 Ford Taurus Limited, SE, and SEL models equipped with the 3.5L engine.

The BRExhaust 106-0805 Direct-Fit Replacement Exhaust Kit is engineered to provide a reliable, bolt-on solution for replacing your worn or damaged factory exhaust system. This kit includes all components needed to refresh the system from the rear of the catalytic converter back, utilizing precision mandrel-bent aluminized steel tubing. Unlike standard crush-bent pipes, mandrel bending maintains a consistent internal diameter throughout every curve, reducing backpressure and optimizing exhaust flow.

This multi-piece system is designed for a straightforward DIY installation, following factory routing to clear chassis obstructions without the need for custom fabrication, welding, or pipe bending. It is an exact interchange for OE part number DG1Z-5230-B and ensures all factory emissions equipment remains intact and compliant.

• Direct-fit replacement for OE part number DG1Z-5230-B
• Durable aluminized steel construction for enhanced corrosion resistance
• Precision mandrel-bent tubing for superior flow characteristics
• Complete bolt-on kit; no welding or specialized tools required
• Includes (1) 2.25-inch U-bolt clamp, (4) 2.5-inch U-bolt clamps, gaskets, and hardware
• Manufacturer Part Number: 106-0805
• 2-year unlimited mileage warranty

Fits select 1993-1997 Ford Ranger, Mazda B3000, and Mazda B4000 trucks.

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0263 provides a complete, bolt-on solution to replace your worn factory exhaust system. Engineered as a direct replacement from the rear of the catalytic converter, this kit eliminates the need for custom fabrication, welding, or tube bending. Unlike many aftermarket options that use restrictive crush-bending, this system features precision mandrel-bent tubing to maintain consistent diameter and optimal exhaust flow.

• Materials: Durable aluminized steel construction for enhanced corrosion resistance.
• Installation: Multi-piece, bolt-on design for a straightforward DIY install using factory mounting points.
• Compliance: Designed to leave all factory emissions equipment intact and functional.
• Included Hardware: (1) Donut Gasket, (3) 2.125in. U-Bolt Clamps, and (1) Spring Bolt Kit.
• MPN: 106-0263
• Warranty: 2-year, unlimited mileage warranty.

Interchanges with OE part numbers F37Z-5230-E, F37Z-5230-F, F47Z-5230-A, ZZM8-40-500, ZZM8-40-500A, and ZZM8-40-500B.

Fits select 2021-2025 Chevrolet Tahoe and GMC Yukon 4WD models (5.3L).

The Corsa Sport Cat-Back exhaust system is engineered specifically for the 2021+ GM full-size SUV platform to provide an aggressive exterior sound without compromising cabin comfort. This system features Corsa’s patented Reflective Sound Cancellation (RSC) technology, which targets and eliminates the low-frequency sound waves that cause interior drone while maintaining a deep, performance-oriented rumble under acceleration.

Constructed from premium 304 stainless steel, this system uses 3.0-inch to 2.75-inch mandrel-bent tubing to ensure maximum exhaust flow. The straight-through design reduces backpressure, which Corsa notes can unlock up to 20% additional horsepower and torque over the factory setup. Installation is a direct bolt-on process requiring no cutting or welding, typically completed in about an hour using factory mounting points.

• Fits 2021-2025 Chevrolet Tahoe and GMC Yukon 4-door 4WD models with 5.3L engine
• Sport sound level: aggressive note under throttle with a quiet cruise
• Patented RSC Technology for a drone-free cabin experience
• Dual rear exit with twin 4.0-inch dual-wall Pro Series black stainless steel tips
• Mandrel-bent 304 stainless steel construction for corrosion resistance
• Bolt-on installation; no cutting required
• Manufacturer Part Number: 21127BLK
• Made in the USA

Fits 2015-2020 Audi S3 (8V) Premium, Premium Plus, and Prestige models.

The AWE SwitchPath Exhaust provides a dual-personality soundtrack for the Audi S3 by utilizing a valved passenger-side outlet that integrates directly with factory ECU commands and Drive Select modes. When the valve is closed, the system maintains a refined tone for daily driving; when opened via Dynamic mode or aggressive throttle input, it delivers a signature AWE acoustic profile with enhanced crackles and a straight-through flow design.

This system is handcrafted from U.S.-sourced T304L stainless steel, featuring CNC mandrel-bent 3-inch and 2.5-inch tubing with a 0.065-inch wall thickness for long-term durability. It concludes with 102mm double-walled, slash-cut tips finished in Diamond Black for a premium aesthetic that fills the rear valance perfectly. Designed as a direct bolt-on replacement, it ensures a straightforward installation without the need for modification.

• Handcrafted from CNC mandrel-bent 3” and 2.5” U.S.-sourced .065” wall T304L stainless steel
• 102mm double-walled, slash-cut tips in Diamond Black with stamped AWE logo
• Retains factory valve behavior and Drive Select functionality
• Straight-through design for maximized exhaust scavenging and performance
• Direct bolt-on fitment with AWE No CEL Guarantee
• Includes all necessary hardware for installation
• Manufacturer Part Number: 3025-43072
• Lifetime Warranty

Fits 2023-2026 Toyota GR Corolla models, including Core, Circuit Edition, Morizo Edition, Premium, and Premium Plus.

The AWE Track Edition Cat-Back Exhaust is engineered for enthusiasts who demand maximum volume and weight savings from the GRC’s turbocharged 3-cylinder engine. This system features a non-resonated mid-section for an aggressive, raw acoustic profile. By eliminating the factory valve and restrictive backpressure points, AWE has optimized exhaust flow and reduced overall vehicle weight. The system includes a dedicated bracket to safely mount the factory electronic valve actuator, preventing dashboard warning lights while maintaining a clean installation.

Construction consists of 3-inch U.S.-sourced CNC mandrel-bent .065-wall T304L stainless steel, transitioning into a tailored tri-merge design to ensure even flow through the triple-tip exit. The unique outlet configuration features a central 4.5-inch x 8-inch oval tip flanked by two 5-inch round tips, all finished in Chrome Silver with a double-walled, slash-cut design and stamped AWE logos.

• Direct bolt-on fitment with a 3-inch inlet to accommodate factory or aftermarket downpipes
• Handcrafted from 3-inch T304L stainless steel for maximum durability
• Dyno-proven gains of 3 hp and 1 lb-ft of torque at the wheels
• Triple-tip layout: One 4.5" x 8" center oval and two 5" side round tips
• Includes bracket for factory valve motor to ensure No CEL (Check Engine Light)
• AWE Perfect Fitment Guarantee and Lifetime Warranty
• Manufacturer Part Number: 3020-52472

Fits select 2023-2025 Nissan Z models including Sport, Performance, Proto Spec, and Nismo trims (RZ34).

The AWE Track Edition Cat-Back Exhaust is engineered for Nissan Z enthusiasts seeking the most aggressive soundtrack for the 3.0TT engine. This system features a full dual 3-inch configuration, replacing the factory exhaust from the downpipes back. Unlike the Touring Edition, the Track Edition removes AWE’s patented 180 Technology® resonators, resulting in a raw, pronounced exhaust note during mid-range acceleration and cruising. This setup is specifically designed for drivers who want maximum volume and an exotic, clean tone.

Handcrafted in the USA, this exhaust is constructed from U.S.-sourced .065” wall T304L stainless steel. The CNC mandrel-bent 3-inch piping integrates a precision X-pipe and robust resonated midpipes to keep rasp in check while maximizing flow. On the dyno, this system achieved max gains of +6 hp and +14 lb-ft of torque at the wheels when used with factory downpipes. Each kit includes two 5-inch double-walled, slash-cut chrome silver tips that are individually adjustable to set the depth within the rear bumper.

• Full dual 3-inch design optimized for the RZ34 platform
• Handcrafted from CNC mandrel-bent T304L stainless steel
• Dyno-proven max gains of 6 hp and 14 lb-ft of torque at the wheels
• Precision-engineered X-pipe produces a clean, exotic sound profile
• Direct bolt-on installation for both automatic and manual transmissions
• Includes bespoke adapter plates and gaskets to mate 3-inch system to factory downpipes
• Dual 5-inch adjustable slash-cut tips in Chrome Silver finish
• AWE Fitment Guarantee and No Check Engine Light (CEL) Guarantee
• Lifetime Warranty and 50-state emissions compliance
• Manufacturer Part Number: 3020-32400

Fits 2022-2025 Subaru WRX models (Base, GT, Limited, Premium, TR, and TS).

The AWE Touring Edition Cat-Back Exhaust is engineered for the VB Subaru WRX owner seeking a deep, signature Boxer rumble without the compromise of cabin drone. This 3-inch system is handcrafted from U.S.-sourced, CNC mandrel-bent .065-inch wall T304L stainless steel to ensure maximum flow and durability. The mid-pipe features a bullet-style resonator, while the rear sections utilize AWE’s patented 180 Technology. This drone-canceling solution targets and eliminates specific resonance frequencies while maintaining a straight-through design for uninterrupted exhaust flow.

This direct bolt-on system provides a refined interior experience during cruising and an aggressive exterior note under load. The configuration is finished with quad 4-inch double-walled slash-cut tips in Diamond Black, providing a premium aesthetic that fills the factory rear valance perfectly.

• Patented 180 Technology drone-canceling resonators
• Constructed from 3-inch T304L stainless steel (.065-inch wall thickness)
• Max gains of 7 hp and 4 ft-lbs of torque at the wheels
• Quad 4-inch slash-cut, double-walled Diamond Black tips
• 50-state emissions legal cat-back design
• Direct bolt-on installation; no cutting or welding required
• AWE No Check Engine Light Guarantee
• AWE Lifetime Warranty
• Manufacturer Part Number: 3015-43979

Fits 2020-2025 Subaru Outback Limited XT, Onyx Edition XT, Touring XT, and Wilderness (H4-2.4L).

Refine your Subaru's performance and exhaust note with the aFe Takeda Cat-Back Exhaust system. This performance system is engineered to optimize flow, resulting in measured gains of up to +6 HP and +7 lbs. x Ft. of torque. Constructed from 2.5-inch to 2.25-inch mandrel-bent 304 stainless steel tubing, this system ensures maximum durability and corrosion resistance. The high-flow 304 stainless steel mufflers are specifically tuned to deliver a deep, aggressive tone while maintaining cabin comfort.

Designed for a seamless installation, this exhaust utilizes a factory-style flange and hangers, making it a direct bolt-on replacement for the OE system with no cutting or modifications required. Every joint is 100% MIG-welded for race-proven strength, ensuring long-term reliability on and off the road.

• Fits 2020-2025 Subaru Outback (H4-2.4L Turbo)
• Material: 304 Stainless Steel for superior corrosion resistance
• Tubing Size: 2-1/2 inch to 2-1/4 inch mandrel-bent tubing
• Finish: Natural
• MIG-welded construction for maximum durability
• Direct bolt-on fitment using factory mounting points
• Includes high-flow 304 stainless steel mufflers
• Manufacturer Part Number: 49-36805

Fits 2007-2015 Mini Cooper models including Base, S, Clubman, Coupe S, John Cooper Works, and Roadster S (L4-1.6L).

The aFe MACHForce XP cat-back exhaust system is engineered to unlock performance, delivering documented gains of 11 hp and 10 lbs./ft. of torque. Constructed from mandrel-bent stainless steel, this system utilizes a unique crossover balance tube that equalizes exhaust pressure and tunes exhaust pulses. This design optimizes flow for better performance while simultaneously reducing sound decibels and minimizing cabin drone.

Built for durability and ease of installation, the system is 100% hand TIG-welded and utilizes factory mounting locations for a secure fit without the need for custom fabrication. The free-flowing muffler is specifically designed to absorb high-pitch tones, resulting in a mellow yet powerful sound that complements the 1.6L engine.

• Produces gains of 11 hp and 10 lbs./ft. of torque
• Mandrel-bent stainless steel construction for maximum flow
• Dual 3.5 in. polished 304 stainless steel exhaust tips
• Hand TIG-welded for race-proven strength
• Crossover pipe equalizes pressure and reduces exhaust drone
• Utilizes factory hanger locations and high-quality band clamps
• 50-state legal emissions status
• 2-year limited warranty
• Manufacturer Part Number: 49-36318

Fits 1999-2004 Ford Mustang models including Base, GT, Mach 1, and SVT Cobra (4.6L).

The SLP LoudMouth Cat-Back Exhaust System is engineered to provide maximum flow and a signature aggressive tone for the 1999-2004 Mustang platform. This system replaces the restrictive factory cat-back assembly with SLP’s modular LoudMouth resonators, significantly reducing backpressure compared to traditional chambered mufflers. Designed for a precise fit on the SN95/New Edge chassis, it delivers a raw, high-performance sound while maintaining the durability expected from SLP performance components.

• Manufacturer Part Number: M31007
• Product Series: LoudMouth
• System Type: Cat-Back
• Engine Compatibility: 4.6L
• Application: 1999-2004 Ford Mustang (All Models)
• Hardware: Included for standard installation

Fits 2021-2025 Ford Bronco models equipped with the 2.7L twin-turbo V6.

The MagnaFlow Overland Series Cat-Back Performance Exhaust system #19559 is engineered to maximize the off-road utility of your 2.7L Bronco. Developed using detailed 3D scans of the vehicle chassis, this system features a high-clearance design that tucks the exhaust closer to the undercarriage than the factory equipment. This provides significantly improved ground clearance and a sharper rear departure angle, essential for technical rock crawling and navigating deep trail obstacles.

This performance kit utilizes 3-inch mandrel-bent main piping that flows into a straight-through muffler before terminating in a 2.5-inch high-clearance side exit on the driver's side. To ensure comfort during long highway hauls to the trailhead, MagnaFlow incorporates tunable NDT (No Drone Technology) quarter-wave resonators. This specific engineering cancels out unwanted low-frequency resonance at cruising speeds while maintaining the brand's signature deep, moderate exterior exhaust tone.

• High-clearance design improves ground clearance and departure angles
• Precision CNC robotic manufacturing for exact fitment
• 3-inch main piping with 2.5-inch single driver-side exit
• NDT (No Drone Technology) eliminates cabin drone at highway speeds
• Durable stainless-steel construction for corrosion resistance
• Direct-fit installation using factory mounting points
• Includes all necessary hardware for installation

Fits select 1980-1993 Volvo 240, 242, 244, 245, 262, 264, and 265 models (2.3L).

The BRExhaust Direct-Fit Replacement Exhaust Kit 106-0631 is engineered to restore factory-level performance and exhaust routing without the complexity of custom fabrication. Built from durable aluminized steel, this kit features precision mandrel-bent piping to maintain consistent diameter through every curve, providing superior flow characteristics compared to standard crush-bent alternatives. The multi-piece, bolt-on architecture allows for a straightforward installation that navigates around chassis obstructions using factory mounting locations.

This comprehensive kit includes all necessary gaskets and hardware to complete the job, ensuring a leak-free seal. By maintaining all original emissions equipment locations, this system ensures your vehicle remains compliant while benefiting from long-lasting corrosion resistance. It serves as a direct replacement for multiple original equipment part numbers, making it a reliable solution for aging or rusted Volvo 200-series exhaust systems.

• Construction: Durable Aluminized Steel
• Bending: Precision Mandrel-Bent Tubing
• Hardware Included: (4) 2.125-inch U-Bolt Clamps, gaskets, and instructions
• Design: Multi-piece, bolt-on replacement; no welding or bending required
• OE Interchange: 1219276, 1357065, 1357755, 1357756, 1357981, 1357982, 271421, 273989, 274061, 274078, 31372147, 31372177, 31372179
• Warranty: 2-Year Unlimited Mileage

Fits the Scion FR-S, Subaru BRZ, and Toyota GT86/GR86.

The ISR Performance ST Series Exhaust is a high-flow, single-exit system designed for drivers looking to reduce vehicle weight and achieve a more aggressive exhaust note. By replacing the bulky factory dual-exit muffler with a streamlined single-pipe design, this system improves exhaust scavaging and enhances throttle response. The ST series is known for its distinct burnt tip finish, adding a race-inspired aesthetic to the rear of the ZN6/ZN8 and ZC6/ZD8 chassis.

• Direct bolt-on replacement for the factory exhaust system
• Single-exit configuration significantly reduces weight compared to stock
• Features a signature burnt tip finish for a custom look
• Mandrel-bent piping ensures smooth exhaust flow and minimal backpressure
• Includes necessary hardware for installation onto factory hanger locations
• Manufacturer Part Number: IS-ST-GT86

Fits 2011 Honda CR-Z models.

The HKS Hi-Power rear section exhaust (32016-AH025) is engineered to improve exhaust flow and provide a sportier, more aggressive tone without the complexity of a full cat-back system. Inspired by endurance racing designs, this Hi-Power series muffler features a high-flow straight-through design to reduce backpressure while maintaining a refined sound profile.

Constructed from high-quality SUS304 stainless steel for superior corrosion resistance and durability, this rear section features a polished muffler body and a signature HKS tip. It is designed as a direct-fit replacement for the factory rear section, bolting onto the original mounting points for a straightforward installation.

• Manufacturer Part Number: 32016-AH025
• Series: Hi-Power
• Configuration: Rear Section Only (Axle-back)
• Material: SUS304 Stainless Steel
• Direct bolt-on fitment using factory hangers
• Precision TIG welding for maximum joint strength

Fits 2023+ Honda Civic Type R (FL5) equipped with the K20C engine.

The HKS LEGAMAX Sports exhaust system is engineered to enhance the acoustic profile and exhaust flow of the FL5 Civic Type R. Constructed from high-quality SUS304 stainless steel, this system provides a refined, sporty tone that remains comfortable for daily driving while reducing backpressure at higher RPMs. The design utilizes optimized piping diameters and high-flow muffler canisters to improve response without the excessive cabin drone often found in generic aftermarket exhausts.

• Direct bolt-on installation to factory mounting points
• High-quality SUS304 stainless steel construction for corrosion resistance
• Precision TIG welding for maximum durability
• Designed specifically for the K20C turbocharged engine
• Optimized exhaust flow for improved turbo response
• Manufacturer Part Number: 31021-AH005

Fits select 2004-2024 Nissan Titan LE, Platinum Reserve, PRO-4X, S, SE, SL, SV, and XE models (5.6L).

The Gibson Patriot Skull Series cat-back exhaust delivers an aggressive, powerful tone designed to bring your Nissan Titan to life. Engineered with 4-inch mandrel-bent stainless steel tubing, this system maximizes exhaust flow while maintaining durability against the elements. The system features a baffled and chambered muffler design that provides a deep, authoritative sound without the need for internal packing that can degrade over time.

Standing out at the rear is a massive 6-inch Black Cerakote exhaust tip, complete with a stainless steel American Flag badge and a rolled-edge slash-cut finish. Installation is straightforward using factory-style hangers and included hardware for a secure bolt-on fitment. This system is designed to provide that signature Patriot Skull attitude with minimal interior drone during highway cruising.

• Part Number: 76-0012
• 4-inch mandrel-bent stainless steel tubing
• 6-inch Black Cerakote rolled-edge slash-cut tip
• Baffled and chambered muffler for aggressive sound and low drone
• Clamp-on tip with stainless American Flag badge
• Includes all necessary hardware and factory-style hangers
• Limited Lifetime Warranty
• Made in the USA

Fits 2021-2025 Ford Bronco Badlands, Base, Big Bend, Black Diamond, First Edition, Heritage, Outer Banks, Stroppe, and Wildtrak (2.3L / 2.7L).

This CORSA Performance 2.75-inch cat-back exhaust system is engineered specifically for the Ford Bronco to deliver a deep, aggressive exhaust note without cabin drone. Utilizing patented Reflective Sound Cancellation (RSC) Technology, Corsa engineers have tuned the acoustic profile to eliminate harsh frequencies during cruise while maintaining a high-performance tone under acceleration.

Designed for the trail, this system features a high-tuck, center-forward muffler location to maximize approach and departure angles for off-road driving. The single-side exit is finished with a clamp-on turndown tip made from premium 304 stainless steel, providing maximum ground clearance. The system is a direct bolt-on replacement for the factory exhaust and requires no permanent modifications.

• Outflows factory exhaust system by up to 120% for increased horsepower and torque potential
• Patented RSC Technology ensures a drone-free experience at cruising speeds
• Constructed from 2.75-inch premium 304 stainless steel for superior corrosion resistance
• High-tuck muffler design improves ground clearance and protects components during off-road use
• Includes clamp-on 304 stainless steel turndown tip with etched CORSA logo
• Easy bolt-on installation typically completed in under an hour
• Manufacturer Part Number: 21207
• Made in the USA and backed by a Lifetime Warranty

Fits 2008-2025 Chevrolet Corvette Base, Grand Sport, Stingray, Z06, and ZR1 equipped with factory NPP exhaust systems.

The CORSA Performance Muffler Delete NPP & AFM Cat-Back Exhaust System is engineered for drivers seeking the most aggressive acoustic profile available without sacrificing modern valve functionality. This 3.0-inch system replaces the restrictive factory mufflers to maximize weight savings and exhaust flow, while the Corsa-engineered cast valve assemblies maintain full compatibility with both NPP (dual-mode) and AFM (active fuel management) systems. This ensures a drone-free cruising experience and prevents check engine lights (CEL) after a proper valve re-learn sequence.

Constructed from premium 304 stainless steel, this mandrel-bent system is track-tested and dyno-proven to deliver significant performance gains. By reducing backpressure and shedding nearly 20 pounds of dead weight compared to the OE exhaust, this kit provides a tangible improvement in throttle response and vehicle dynamics.

• Performance Gains: Up to 18 HP and 16 lb-ft of torque
• Weight Savings: Nearly 20 lbs lighter than the factory exhaust
• Sound Profile: 15 decibels louder than stock with aggressive cold starts
• Tip Design: Quad 4.5-inch Black PVD Pro Series dual-wall tips
• Valve Retention: Maintains NPP sound control and AFM cylinder-deactivation functionality
• Construction: 3.0-inch 304 stainless steel with mandrel bends
• Manufacturer Part Number: 21106BLK

Fits 2020-2025 Chevrolet Corvette Stingray models. This Corsa Performance Track Series cat-back exhaust system is engineered for drivers seeking the most aggressive sound profile and maximum weight reduction for the C8 platform. By utilizing a straight-through 3.0-inch path that deletes the stock AFM (Active Fuel Management) valves, this system provides an unrestricted exhaust note that is 13 decibels louder than the factory setup.

• Dyno-proven gains of up to 19 HP and 16 lb-ft of torque
• Saves 27 lbs compared to the heavy OEM exhaust assembly
• Constructed from premium 3.0-inch 304 stainless steel for maximum corrosion resistance
• Includes machined AFM valve simulator brackets to ensure proper actuator alignment and prevent ECU errors
• Features quad 4.5-inch black Pro Series dual-wall tips for a bold, track-ready aesthetic
• Xtreme sound level: Corsa's most aggressive tone with no restrictions
• Handcrafted in the USA and backed by a lifetime warranty
• All necessary installation hardware included (MPN: 21104BLK)

Fits 2020-2025 Chevrolet Corvette Stingray models. This Corsa Performance Xtreme Series cat-back exhaust is engineered for C8 owners seeking an ultra-aggressive exhaust note while maintaining drivability during 4-cylinder economy mode. By integrating Corsa's bolt-on C8-spec cast AFM valve assemblies, this system effectively eliminates the resonance typically associated with cylinder deactivation without sacrificing the raw, high-volume sound of the Xtreme sound level.

Constructed from premium 3.0-inch 304 stainless steel, this exhaust system is designed for maximum flow and significant weight reduction, shedding 25 pounds compared to the factory unit. The system is finished with massive 4.5-inch black Pro Series dual-wall quad tips for a bold, track-inspired aesthetic. This cat-back has been track-tested and dyno-proven to deliver performance gains of up to 19 HP and 16 lb-ft of torque.

• Manufacturer Part Number: 21102BLK
• System Diameter: 3.0-inch
• Tip Specification: 4.5-inch Black Quad Tips (Dual Wall)
• Sound Level: Xtreme (+13 decibels over stock)
• Material: 304 Stainless Steel
• Weight Savings: 25 lbs lighter than OEM
• Performance Gains: Up to 19 HP and 16 lb-ft Torque
• Hardware: Includes all necessary installation hardware
• Integration: Retains factory AFM valve functionality
• Warranty: Lifetime Exhaust; 5-Year Valve
• Origin: Made in the USA