The Eibach ERS (Eibach Race Spring) 0500.225.0650 is a precision-engineered coilover spring designed for specialized racing applications. These springs provide the maximum travel possible while maintaining the smallest block heights, ensuring suspension performance remains consistent without coil bind.

Every ERS spring is individually tested to guarantee extreme linearity and consistency throughout its stroke. The ultra-lightweight design focuses on reducing unsprung mass, which allows for faster damper response and improved mechanical grip on the track.

• Length: 5.00 inches
• Inside Diameter: 2.25 inches
• Spring Rate: 650 lbs/in
• Maximum travel in combination with the smallest block heights
• High linearity and guaranteed rate consistency
• Ultra-lightweight construction to reduce unsprung mass
• Manufacturer Part Number: 0500.225.0650

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision and consistency are critical for suspension tuning. This 5.00-inch length coilover spring features a 2.25-inch inner diameter and a 600 lbs/in spring rate, delivering the high linearity and tight tolerances required for predictable handling on the track.

Designed to provide maximum travel with the smallest possible block heights, these springs reduce the risk of coil bind while maintaining an ultra-lightweight profile to minimize unsprung mass. Whether used on shocks, pull-bars, or specialized dampers, each spring is individually tested to ensure performance consistency across your setup.

• Manufacturer Part Number: 0500.225.0600
• Length: 5.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 600 lbs/in
• High-tensile spring steel construction
• Individually tested for rate accuracy and linearity
• Maximum travel with minimal block height

Eibach ERS linear tender springs are designed to be paired with a main spring to create a dual-rate suspension setup. By providing a softer initial rate, these springs allow for finer tuning of your race car's handling dynamics, improving traction and weight transfer. Every Eibach Race Spring is manufactured to precise tolerances, ensuring predictable performance under extreme racing conditions.

• Manufacturer Part Number: 0225.225.0250
• Inside Diameter: 2.25 in.
• Spring Length: 2.25 in.
• Spring Rate: 250 lbs/in
• Configuration: Linear tender spring
• Highest linearity and guaranteed consistency across the stroke
• Each spring is individually tested for rate accuracy
• Compatible with standard 2.25 in. ID coilover systems

The Eibach ERS (Eibach Race Spring) 2.25 in. ID Linear Tender Spring is a precision-engineered suspension component designed for dual-spring coilover setups. By pairing this tender spring with a main spring, racers can achieve a softer initial spring rate, which is critical for maintaining traction over small undulations and ensuring the spring stack remains seated under full suspension droop.

Built to the exacting standards of professional motorsport, every Eibach ERS component is individually tested to ensure the highest levels of linearity and rate consistency. Whether you are tuning shocks or pull-bars, these springs provide the predictable handling dynamics required for competitive racing applications.

• Inner Diameter: 2.25 in.
• Spring Design: Linear Tender
• Manufacturer Part Number: 0175.225.0250
• Testing: Each spring is individually tested for guaranteed consistency
• Application: Designed for use in dual-spring racing suspension systems
• Performance: Delivers a softer initial rate before transitioning to the main spring

Engineered for professional racing applications, the Eibach ERS (Eibach Race Spring) system delivers the precision required to optimize vehicle handling. This 2.25-inch inner diameter spring is designed for use in multi-spring setups, providing a softer initial rate when paired with a main spring to better manage suspension travel and load transitions. Whether utilized on race shocks or pull-bars, these springs offer the consistency and linearity essential for predictable performance on the track.

• Inner Diameter: 2.25 inches
• Length: 2.71 inches
• Spring Rate: 150 lbs/in
• Individually tested for guaranteed rate accuracy and linearity
• Part of the precision-engineered ERS catalog
• Manufacturer Part Number: 0175.225.0150

Fits select 2009-2023 Dodge Ram 1500 and Ram 1500 Classic models.

The Belltech 5317 Rear Lowering Coil Spring Set is precision-engineered to deliver a substantial 4-inch drop for your truck's rear suspension, providing the aggressive stance you want without sacrificing the ride quality you expect. Unlike many aftermarket lowering solutions, Belltech specializes in maintaining OEM-level ride comfort while significantly improving the handling performance of your sport truck.

Each coil is manufactured from cold-wound chromium alloy steel to ensure high tensile strength and consistent spring rates. The springs are shot peened to increase fatigue life and finished with a durable gunmetal powder coat to resist corrosion and harsh road conditions.

• Specifically tuned for 4-inch rear lowering on Dodge/Ram 1500 platforms
• Cold-wound chromium alloy steel construction for maximum durability
• Shot-peened finish increases spring longevity and performance
• Gunmetal powder-coated finish for superior corrosion resistance
• Designed to maintain factory ride quality while reducing body roll
• Manufacturer Part Number: 5317

Fits 1987-1996 Ford F-150 (Custom, Eddie Bauer, Lightning, Special, XL, XLT, and XLT Lariat).

Belltech Lowering Coil Springs are engineered to provide the visual drop you want while maintaining the ride quality you expect. Unlike generic lowering springs, these are specifically tuned to improve the handling performance of your Ford truck by lowering the center of gravity and reducing body roll during cornering. This set provides a balanced approach to sport truck suspension, ensuring the vehicle remains comfortable for daily driving.

Construction starts with high-tensile cold-wound chromium alloy steel. To ensure maximum durability and resistance to sagging over time, each spring is shot peened and then finished in a resilient gunmetal powder coating. These springs are designed to bolt into the factory mounting points as a direct replacement for the original equipment.

• Manufacturer Part Number: 4800
• Material: Cold-wound chromium alloy steel
• Finish: Gunmetal powder coat
• Processing: Shot peened for increased fatigue life and durability
• Fitment: Specific to 2WD Standard and Extended Cab models

Fits 1997-2004 Dodge Dakota (V8 - All Cabs).

Improve the stance and handling performance of your sport truck with the Belltech Lowering Coil Spring Set. These springs are engineered to provide a visual drop while maintaining the ride comfort and quality expected from an OE-style component. By lowering the center of gravity, these coils reduce body roll and improve cornering stability specifically for V8-equipped Dakota models.

Each spring is manufactured from cold wound chromium alloy steel, ensuring consistent spring rates and long-term durability. The coils undergo a shot peening process to reduce material stress and increase fatigue life, followed by a gunmetal powder coat finish to protect against corrosion and harsh road conditions.

• Specifically designed for 1997-2004 Dodge Dakota V8 applications
• Cold wound chromium alloy steel for maximum strength
• Shot peened to improve material durability and service life
• Durable gunmetal powder coat finish resists rust and debris
• Engineered to maintain factory ride quality with improved handling
• Manufacturer Part Number: 4764

Fits 2007-2014 Toyota Tundra (1794 Edition, Base, Limited, Platinum, SR, and SR5).

Belltech lowering coil springs are engineered to provide the aggressive stance you want for your Tundra while maintaining the ride quality and comfort expected from a performance sport truck. Unlike generic lowering springs, Belltech specifically focuses on improving handling characteristics and stability, reducing body roll and squat during acceleration and cornering.

Each spring is manufactured from cold-wound chromium alloy steel for maximum durability and resistance to sagging. To ensure a long service life and consistent performance, the coils are shot peened to reduce material stress and finished with a durable gunmetal powder coating to protect against corrosion and road debris. These springs are designed to bolt directly into the factory location for a precise fit.

• Manufacturer Part Number: 4263
• Constructed from cold-wound chromium alloy steel
• Shot peened for increased fatigue life and durability
• Durable gunmetal powder coated finish
• Engineered for precise ride height and improved handling performance
• Direct replacement for OE front coil springs

Fits 1996-2004 Toyota Tacoma (Base, DLX, Pre Runner, S-Runner, and SR5).

Lowering your first-generation Tacoma requires a spring that balances a more aggressive center of gravity with consistent ride quality. Belltech lowering coil springs are engineered to provide a visual drop while maintaining the comfort and handling characteristics expected for sport trucks and SUVs. Unlike standard springs, these are designed to improve cornering stability and reduce body roll by lowering the vehicle's roll center.

Each spring in the 4260 set is manufactured from cold-wound chromium alloy steel, then shot-peened and powder-coated to ensure the material retains its spring rate and height over years of use. These springs are a direct replacement for factory units, designed to fit precisely into the OEM spring seats.

• Manufactured from high-tensile cold-wound chromium alloy steel
• Shot-peened to increase surface durability and fatigue resistance
• Gunmetal powder-coated finish for maximum corrosion protection
• Tuned specifically for the 1996-2004 Tacoma chassis to ensure proper ride height
• Designed to improve handling performance and stance
• Manufacturer Part Number: 4260

Fits select 2002-2009 Chevrolet SSR, Trailblazer, Trailblazer EXT, and GMC Envoy, Envoy XUV models.

Belltech lowering coil springs are engineered to provide a lower center of gravity and a more aggressive stance without compromising the ride quality expected from an OE-style spring. Unlike generic lowering springs, these are specifically tuned for the weight and suspension geometry of Sport Trucks and SUVs to improve cornering grip and reduce body roll.

Each spring in the 4230 set is manufactured from cold wound chromium alloy steel to ensure consistent spring rates. The coils are shot peened to increase fatigue resistance and finished in a durable gunmetal powder coat for long-term protection against corrosion and debris.

• Manufacturer Part Number: 4230
• Direct-fit replacement for factory coil springs
• Cold wound chromium alloy steel construction
• Shot peened to increase material longevity
• Durable gunmetal powder coated finish
• Designed to improve handling performance and ride comfort

Fits select 2002-2009 Chevrolet SSR, Trailblazer, Trailblazer EXT and GMC Envoy, Envoy XUV models. This Belltech lowering coil spring set (MPN: 4207) is engineered to provide a visual drop and improved handling performance for your SUV or truck while maintaining factory-level ride comfort. Each spring is specifically designed to meet exact height requirements and eliminate the floating feel associated with factory suspension.

Constructed for longevity and precision, these springs are manufactured using cold-wound chromium alloy steel. The manufacturing process includes shot peening to increase fatigue resistance and a durable powder-coated gunmetal finish to prevent corrosion in harsh environments. These springs are a direct-fit solution for enthusiasts looking to lower their vehicle's center of gravity and reduce body roll during cornering.

• Fits 2002-2009 Chevrolet Trailblazer and GMC Envoy applications
• Manufactured from cold-wound chromium alloy steel for maximum durability
• Shot peened to enhance material strength and service life
• Protective powder-coated gunmetal finish for superior corrosion resistance
• Engineered to optimize both ride quality and handling performance
• Manufacturer Part Number: 4207