Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Your cart
-
0-9
-
A
-
B
-
R
-
S
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Coilover Springs
Coilover springs are the heart of any adjustable suspension system, dictating ride height, handling balance, and compliance over bumps. Whether you're track-tuning a corner-carver or building a street-friendly coilover kit, spring rate, free length, and inside diameter are the critical specifications that determine how your car will respond.
This collection brings together a selection of coilover springs from reputable manufacturers, offered in both linear and progressive rates. Linear springs provide a consistent rate for predictable handling at the limit, while progressive springs deliver a softer initial travel for street comfort before ramping up under load. Use the filters to narrow by:
- Spring rate (lbs/in)
- Free length (inches)
- Inside diameter (ID) – typically 2.25", 2.5", or 60mm to match your perches
Material and finish matter too—look for high-tensile steel, often powder-coated or chrome-silicon for durability and corrosion resistance. Some springs are designed for specific damper bodies, while others are universal-fit with the right adapters. If you're unsure what you need, our suspension specialists can help you decode the numbers.
402 products
402 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The Eibach ERS (Eibach Race Spring) system is a precision-engineered solution for racers and performance enthusiasts requiring exact suspension tuning. This 6.00-inch length coil-over spring is designed with a 3.00-inch inside diameter (ID) to accommodate a variety of racing shocks and pull-bar applications.
Built for maximum travel and the smallest possible block heights, these springs provide consistent performance across their entire travel range. Each spring is individually tested to ensure high linearity and guaranteed rate consistency, making them ideal for the rigorous demands of off-road and track use where predictable handling is critical.
- Manufacturer Part Number: 0600.300.0500S
- Length: 6.00 inches
- Inside Diameter: 3.00 inches
- Design: High linearity for consistent rate performance
- Construction: Engineered for maximum travel and minimal block height
- Quality Control: Each spring is individually tested and verified
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for competitive racing, offering the precision required to optimize suspension geometry and handling dynamics. This 6.00-inch coilover spring is designed with a 2.50-inch inner diameter to fit a wide range of racing dampers and pull-bars.
Constructed to provide maximum travel in combination with the smallest block heights, these springs reduce the risk of coil bind while maintaining high linearity. The ultra-lightweight design minimizes unsprung mass, allowing for faster damper response and improved tire contact. Each spring is individually tested and rated to ensure consistency and performance across the entire compression cycle.
- Manufacturer Part Number: 0600.250.0800
- Length: 6.00 inches
- Inner Diameter: 2.50 inches
- Spring Rate: 800 lbs/in
- Series: Eibach Race Springs (ERS)
- Material: High-tensile strength spring steel
- Performance: Guaranteed consistency and precise linearity
- Benefit: Reduced unsprung mass for improved suspension response
📘 Guides & Manuals
Engineered for professional motorsport applications, the Eibach ERS (Eibach Race Spring) system provides the precision and consistency required to fine-tune your vehicle's handling dynamics. This 6-inch linear coilover spring is designed to offer maximum travel in combination with the smallest block heights, preventing coil bind and ensuring predictable suspension response under heavy racing loads.
- Length: 6.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 750 lbs/in
- Manufacturer Part Number: 0600.250.0750
- High linearity and guaranteed rate consistency for repeatable setup changes
- Ultra-lightweight design reduces unsprung mass for improved shock responsiveness
- Individually tested to meet strict Eibach tolerances
- Compatible with a wide range of racing shocks and pull-bar systems
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance applications where precision is paramount. This 6.00-inch coilover spring features a 2.50-inch inside diameter and a 700 lbs/in spring rate, designed to deliver consistent performance and maximum travel without sacrificing block height.
Manufactured with high-tensile strength wire, these springs are ultra-lightweight to reduce unsprung mass, improving suspension response and handling dynamics. Each spring is individually tested and rated to ensure the highest linearity and guaranteed consistency across the entire ERS catalog.
- Series: Eibach Race Spring (ERS)
- Part Number: 0600.250.0700
- Length: 6.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 700 lbs/in
- Construction: High-tensile steel for reduced unsprung mass
- Testing: Each spring is individually tested for rate accuracy
📘 Guides & Manuals
The Eibach ERS (Eibach Racing System) coil-over spring is a precision-engineered component designed for professional racing and high-performance suspension tuning. With a 6.00-inch free length and a 2.50-inch inner diameter, this spring provides the high linearity and guaranteed consistency required for predictable handling dynamics across a wide spectrum of racing applications.
Engineered to offer maximum travel in combination with the smallest possible block heights, these springs help optimize suspension geometry. The ultra-lightweight design reduces unsprung mass, minimizing the load on shocks and pull-bars for faster response. Each spring is individually tested to ensure it meets Eibach’s rigorous standards for performance and reliability.
- Manufacturer Part Number: 0600.250.0650
- Free Length: 6.00 in.
- Inside Diameter: 2.50 in.
- Construction: Ultra-lightweight for reduced unsprung mass
- Linearity: High linearity for consistent performance
- Travel: Designed for maximum travel and minimal block height
- Testing: Each spring is individually tested and verified
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance suspension tuning. This 6.00-inch coilover spring features a 2.50-inch inside diameter and a 600 lbs/in spring rate, providing the precise linearity and consistency required for competitive track use and custom suspension setups.
Each spring is manufactured to deliver maximum travel in combination with the smallest block heights, reducing the risk of coil bind. The ultra-lightweight construction reduces unsprung mass, allowing for faster damper response and improved handling dynamics. Every ERS spring is individually tested to ensure it meets strict tolerances for performance and durability.
- Manufacturer Part Number: 0600.250.0600
- Length: 6.00 inches
- Inside Diameter (ID): 2.50 inches
- Spring Rate: 600 lbs/in
- High-tensile, ultra-lightweight material for reduced unsprung mass
- Guaranteed linearity and consistency through the full range of travel
- Individually tested for rate accuracy
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional motorsport and high-performance suspension tuning. This 6.00-inch linear coilover spring features a 2.50-inch inner diameter and a 550 lbs/in spring rate, providing the predictable handling and consistency required for competitive racing applications.
Designed with high-tensile spring steel, Eibach ERS springs offer an ultra-lightweight profile to reduce unsprung mass while maintaining maximum travel and a compact block height. Each spring is individually tested to ensure it meets strict tolerances for linearity and rate accuracy, allowing for precise chassis adjustment on shocks and pull-bars.
- Manufacturer Part Number: 0600.250.0550
- Free Length: 6.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 550 lbs/in
- Design: Linear rate for consistent suspension response
- Construction: High-tensile strength for reduced weight and increased travel
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) modular system is the industry standard for professional racing and high-performance suspension tuning. This 6.00-inch free-length spring features a 2.50-inch inside diameter and a 500 lbs/in rate, engineered to provide the precise load-bearing characteristics required for corner weighting and suspension frequency adjustments.
Built for durability and performance, these springs feature high linearity and strict rate tolerances to ensure predictable handling on the track. The specialized design maximizes suspension travel while maintaining a minimal block height, effectively reducing the risk of coil bind. Each spring is manufactured from high-tensile steel and individually tested to guarantee consistency across every production run.
- Series: Eibach Race Spring (ERS)
- Manufacturer Part Number: 0600.250.0500
- Free Length: 6.00 in
- Inside Diameter: 2.50 in
- Spring Rate: 500 lbs/in
- Construction: Ultra-lightweight design for reduced unsprung mass
- Quality: Individually tested for rate accuracy and linearity
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system provides the precision and consistency required for competitive racing applications. This 6.00-inch coilover spring features a 2.50-inch inside diameter and a 450 lbs/in spring rate, optimized for shock and pull-bar setups where predictable handling dynamics are essential.
Each spring is engineered for maximum travel with a minimal block height, allowing for increased suspension movement without coil bind. Manufactured to strict tolerances and individually tested, Eibach ERS springs offer reduced unsprung mass and high linearity for professional-grade performance and tuning.
- Maximum travel in combination with the smallest block heights
- Highest linearity and guaranteed consistency for predictable chassis tuning
- Ultra-lightweight design helps reduce unsprung weight
- Individually tested to ensure rate accuracy and performance
- Part Number: 0600.250.0450
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision handling and weight reduction are critical. This 6.00-inch coilover spring features a 2.50-inch inner diameter and a 400 lbs/in spring rate, providing the highest linearity and guaranteed consistency for predictable suspension tuning.
Manufactured with high-tensile steel, these springs are designed to provide maximum travel in combination with the smallest possible block heights. The ultra-lightweight construction reduces unsprung mass, allowing for faster damper response and improved mechanical grip. Each spring is individually tested to ensure it meets exact rate specifications before leaving the factory.
- Series: Eibach Race Springs (ERS)
- Length: 6.00 inches
- Inner Diameter: 2.50 inches
- Spring Rate: 400 lbs/in
- High-tensile steel for maximum travel and minimum block height
- Individually tested for rate accuracy and consistency
- Part Number: 0600.250.0400
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance suspension tuning. This 152mm (6in) length linear main spring features a 64mm (2.5in) inner diameter, providing a precise and consistent rate for predictable handling on the track. Designed to offer maximum travel while maintaining the smallest possible block height, Eibach ERS springs allow for greater suspension articulation without premature coil bind.
- High Linearity: Guaranteed consistency and rate accuracy throughout the spring's travel range.
- Ultra-Lightweight Design: High-tensile steel construction reduces unsprung mass for improved damper response and chassis control.
- Individually Tested: Every spring is tested and measured to ensure it meets Eibach's strict performance tolerances.
- Versatile Application: Suitable for a wide range of racing applications, including coilover shocks and pull-bar systems.
Specifications:
Inner Diameter: 64mm (2.5in)
Free Length: 152mm (6in)
Spring Type: Linear Main Spring
Part Number: 0600.250.0350
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is precision-engineered for professional racing applications where chassis tuning and predictable suspension response are critical. This coil-over spring features a 6.00-inch free length and a 2.25-inch inner diameter, delivering a linear 1200 lbs/in rate designed for use on various shock and pull-bar configurations.
Eibach race springs are manufactured to provide maximum travel before reaching their small block heights, reducing the risk of coil bind while maintaining consistent performance. The ultra-lightweight construction minimizes unsprung mass, allowing your suspension to react more quickly to track surfaces and load changes.
- Manufacturer Part Number: 0600.225.1200
- Length: 6.00 in (152.4 mm)
- Inner Diameter: 2.25 in (57.15 mm)
- Spring Rate: 1200 lbs/in
- Linearity: Engineered for high linearity and guaranteed rate consistency
- Testing: Each spring is individually tested and rated to ensure exact specifications
- Design: Ultra-lightweight for reduced unsprung mass and optimized travel
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is a precision-engineered solution designed for professional racing applications where suspension tuning is critical. These 2.25-inch inner diameter springs allow for uncompromised customization of handling dynamics, from shocks to pull-bar systems. Engineered to provide maximum travel with minimal block height, they ensure consistent performance and predictability at the limit.
- High linearity and guaranteed rate consistency for precise chassis tuning
- Ultra-lightweight construction to minimize unsprung mass and improve damper response
- Each spring is individually tested to ensure accuracy relative to the rated specifications
- Wide range of compatibility for competition-focused suspension setups
Product Specifications:
- Manufacturer Part Number: 0600.225.1000
- Length: 6.00 inches
- Inside Diameter: 2.25 inches
- Spring Rate: 1,000 lbs/in
📘 Guides & Manuals
Eibach ERS (Eibach Race Springs) are precision-engineered for professional racing applications, offering the customization and performance optimization required to fine-tune suspension dynamics. This 6-inch linear coilover spring features a 2.25-inch inner diameter and a 900 lbs/in spring rate, designed to provide maximum travel while maintaining the smallest possible block height.
Constructed from high-tensile spring steel, these ultra-lightweight springs reduce unsprung mass to improve suspension response and mechanical grip. Each spring undergoes individual testing to ensure guaranteed consistency and the highest level of linearity across its full travel range, providing predictable handling on shocks or pull-bars.
- Manufacturer Part Number: 0600.225.0900
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 900 lbs/in
- Ultra-lightweight design for reduced unsprung mass
- Maximum travel in combination with smallest block heights
- High-linearity design for consistent performance
- Individually tested for rate accuracy
📘 Guides & Manuals
Eibach ERS (Eibach Race Springs) are engineered for professional racing applications, providing the precision and consistency required for competitive chassis tuning. This 6.00-inch length coil-over spring features a 2.25-inch inner diameter, meticulously designed to provide maximum travel while maintaining the smallest possible block height. By utilizing high-tensile spring steel, Eibach achieves an ultra-lightweight design that reduces unsprung mass, allowing for faster suspension recovery and improved mechanical grip.
Whether you are optimizing a shock package or a pull-bar setup, these springs deliver high linearity and guaranteed rate consistency. Every ERS spring is individually tested to ensure it meets strict manufacturing tolerances, giving racers a reliable component for repeatable handling dynamics.
- Series: ERS (Eibach Race Springs)
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 850 lbs/in
- Material: High-tensile, ultra-lightweight spring steel
- Manufacturing: Individually tested for linearity and consistency
- MPN: 0600.225.0850
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications requiring precise suspension tuning and consistent performance. This 6.00-inch coilover spring features a 2.25-inch inner diameter and an 800 lbs/in spring rate, designed to provide maximum suspension travel with the smallest possible block height.
Manufactured to exacting tolerances, Eibach ERS springs are renowned for their high linearity and guaranteed consistency across a wide spectrum of racing applications, from shocks to pull-bars. The ultra-lightweight design reduces unsprung mass, allowing for faster damper response and improved tire contact. Each spring is individually tested to ensure it meets the strict requirements of competitive motorsports.
- Series: Eibach Race Springs (ERS)
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 800 lbs/in
- MPN: 0600.225.0800
- High-linearity design for predictable handling dynamics
- Individually tested for rate accuracy and consistency
- Optimized block height for maximum usable travel
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional motorsport applications, offering the precision and customization required to optimize vehicle handling dynamics. This 6.00-inch linear coilover spring features a 2.25-inch inner diameter and a 750 lbs/in spring rate, designed to provide maximum travel while maintaining the smallest possible block height.
Constructed from ultra-lightweight materials to reduce unsprung mass, each spring is individually tested to ensure highest linearity and guaranteed consistency. Whether used on shocks or pull-bars, these springs deliver the reliable performance needed for competitive racing environments.
- Manufacturer Part Number: 0600.225.0750
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 750 lbs/in
- High-tensile strength for reduced weight and increased travel
- Individually tested for rate accuracy and linearity
- Compatible with a wide range of racing shock and pull-bar setups
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision handling and predictable performance are critical. This 6-inch linear coilover spring features a 2.25-inch inner diameter and a 700 lbs/in spring rate, designed to provide maximum travel while maintaining a compact block height to prevent coil bind during aggressive suspension cycling.
Built to exacting tolerances, ERS springs are ultra-lightweight to minimize unsprung mass, allowing the dampers to react more efficiently to track surfaces. Each spring is individually tested to ensure highest linearity and guaranteed consistency, providing the reliable feedback needed for fine-tuning race car dynamics.
- Manufacturer Part Number: 0600.225.0700
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 700 lbs/in
- Series: ERS (Eibach Race Springs)
- Small block height for maximum usable travel
- Lightweight design reduces unsprung weight for faster suspension response
- Individually tested for rate accuracy and consistency
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications, providing the modularity and precision needed to fine-tune suspension dynamics. This 6.00-inch length spring features a 2.25-inch inner diameter, designed to fit a wide range of aftermarket coilover shocks and pull-bar setups.
Manufactured with high-tensile spring steel, these springs are optimized to provide maximum travel with the smallest possible block heights. Each spring undergoes individual testing to ensure strict tolerances, guaranteeing the linearity and consistency required for predictable handling on the track.
- Part Number: 0600.225.0650
- Length: 6.00 inches
- Inner Diameter (ID): 2.25 inches
- Ultra-lightweight design reduces unsprung mass for improved damper response
- High linearity ensures consistent rate through the entire stroke
- Individually tested and rated for precision performance
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) 0600.225.0600 is a precision-engineered coilover spring designed for motorsport applications and performance suspension tuning. This 6.00-inch spring features a 2.25-inch inner diameter and a 600 lbs/in rate, providing the linearity and consistency required for predictable handling on the track.
Manufactured from high-tensile strength steel, Eibach race springs are optimized for an ultra-lightweight profile to reduce unsprung mass and improve damper response. Every spring is individually tested to ensure it meets strict tolerances, offering maximum travel while maintaining the smallest possible block height to prevent coil bind.
- Manufacturer Part Number: 0600.225.0600
- Length: 6.00 inches (152.4mm)
- Inner Diameter: 2.25 inches (57mm)
- Spring Rate: 600 lbs/in
- Series: ERS (Eibach Race Spring)
- Construction: High-tensile spring steel for reduced weight and increased travel
- Testing: Each unit is individually tested for rate and linearity
📘 Guides & Manuals
Engineered for professional motorsport and high-performance suspension tuning, the Eibach ERS (Eibach Race Spring) system provides the consistency and precision required to optimize vehicle handling dynamics. This 6.00-inch length spring features a 2.25-inch inner diameter, designed to fit a wide array of racing shocks and coil-over conversions.
Eibach race springs are manufactured using high-tensile spring steel, allowing for maximum suspension travel while maintaining the smallest possible block height. This ultra-lightweight construction reduces unsprung mass, improving damper response and tire contact. Each spring is individually tested and rated to guarantee the highest linearity and rate consistency throughout its service life.
- Manufacturer Part Number: 0600.225.0550
- Length: 6.00 in
- Inside Diameter (ID): 2.25 in
- Spring Rate: 550 lbs/in
- High-tensile steel construction for maximum travel and minimal block height
- Individually tested to ensure rate linearity and consistency
- Ultra-lightweight design for reduced unsprung weight
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series is engineered for precision performance and unparalleled customization in professional racing applications. This 6-inch coilover spring features a 2.25-inch inner diameter and a 500 lbs/in rate, designed to provide maximum travel while maintaining the smallest possible block height to minimize the risk of coil bind.
Built for consistency and durability, every ERS spring is individually tested to guarantee high linearity and precise tolerances. The ultra-lightweight design reduces unsprung mass, allowing for faster suspension reaction times and improved handling dynamics for track-focused shocks and pull-bars.
- Manufacturer Part Number: 0600.225.0500
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 500 lbs/in
- Performance: Maximum travel in combination with small block heights
- Testing: Individually tested for guaranteed consistency and linearity
- Quantity: Single spring
📘 Guides & Manuals
The Eibach ERS (Eibach Race Springs) system is a highly modular suspension solution designed for competitive racing and precision tuning. This coilover spring features a 6.00-inch free length and a 2.25-inch inner diameter with a 450 lbs/in spring rate. Engineered to provide maximum travel in combination with the smallest possible block heights, these springs allow for optimized handling dynamics across various racing applications, from shocks to pull-bars.
Each spring is cold-wound from high-tensile strength steel and individually tested to guarantee high linearity and consistent performance. The ultra-lightweight design reduces unsprung mass, directly improving suspension response and mechanical grip. This single spring is part of a comprehensive system used by professional teams to achieve unparalleled customization on the track.
- Manufacturer Part Number: 0600.225.0450
- Length: 6.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 450 lbs/in
- Series: ERS (Eibach Race Springs)
- Material: High-tensile strength alloy steel
- Configuration: Single spring
- Features: Individually tested for rate accuracy and consistency
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where suspension tuning and precision handling are paramount. This 6.00-inch length spring with a 2.25-inch inner diameter is part of a series trusted by race teams globally for its reliability and technical tolerances. Designed to provide maximum travel while maintaining the smallest possible block height, these springs allow for increased suspension movement without the risk of binding.
- Precision Linearity: Guaranteed consistency and linear rate performance for predictable handling dynamics.
- Lightweight Design: High-tensile strength construction reduces unsprung mass, allowing dampers to react more efficiently to track surface changes.
- Individually Tested: Every spring is individually tested to ensure it meets strict performance specifications.
- Specifications: 6.00-inch length, 2.25-inch ID, manufacturer part number 0600.225.0400.
Whether utilized on shocks or pull-bars, the ERS series offers the modularity required to fine-tune your race car's corner balance and suspension frequency. Each spring is finished in Eibach's signature protective coating to withstand the rigors of competition.
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional motorsport and high-performance applications where precision tuning is critical. This 6.00-inch coilover spring provides consistent performance across its entire travel range, allowing racers to fine-tune chassis dynamics for shocks, pull-bars, and various suspension configurations.
Constructed with high-tensile strength wire, these springs achieve maximum travel while maintaining the smallest possible block heights. This design reduces unsprung mass and improves shock response, ensuring the tire stays in contact with the track. Each spring is individually tested and rated to guarantee the highest level of linearity and consistency from the factory.
- Manufacturer Part Number: 0600.225.0350
- Free Length: 6.00 inches
- Inside Diameter: 2.25 inches
- Spring Rate: 350 lbs/in
- Series: ERS (Eibach Race Spring)
- Testing: Individually tested for rate and linearity
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series is engineered for professional racing applications where precision handling and suspension tuning are critical. This 6.00-inch coilover spring provides a reliable 300 lbs/in rate, designed to deliver maximum travel while maintaining the smallest possible block height to prevent coil bind during aggressive maneuvers.
Constructed for durability and performance, these springs feature high linearity and guaranteed consistency, ensuring predictable chassis behavior lap after lap. The ultra-lightweight design specifically targets the reduction of unsprung mass, allowing your shocks to respond more effectively to track surface changes. Each spring is individually tested to verify its rate and tolerances before leaving the factory.
- Manufacturer Part Number: 0600.225.0300
- Series: Eibach Race Spring (ERS)
- Length: 6.00 inches
- Inside Diameter: 2.25 inches
- Spring Rate: 300 lbs/in
- Features: Maximum travel with minimal block height, individually tested for rate accuracy
- Material: High-strength, lightweight spring steel for reduced unsprung weight
📘 Guides & Manuals
Eibach ERS (Eibach Race Springs) are the industry standard for precision suspension tuning in professional racing and high-performance applications. This 6.00-inch length spring with a 2.25-inch inner diameter is engineered to provide maximum travel while maintaining a compact block height, allowing for precise handling adjustments on shocks and pull-bar systems.
- Precision Engineering: Designed with high linearity and guaranteed consistency for predictable suspension behavior under load.
- Lightweight Construction: The ultra-lightweight design reduces unsprung mass, improving overall damping response and vehicle dynamics.
- Rigorous Testing: Each spring is individually tested to ensure it meets strict tolerances and performance standards.
- Specifications: 6.00-inch length and 2.25-inch ID (Inner Diameter).
- Manufacturer Part Number: 0600.225.0250
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series provides precision-engineered suspension tuning for professional racing and high-performance applications. This 5.00-inch coilover spring is designed for consistent linearity and maximum travel while maintaining a compact block height to prevent coil bind in tight suspension geometries.
Manufactured to exacting tolerances, each ERS spring is individually tested to ensure it meets its rated 850 lbs/in specification. These springs are engineered with high-tensile strength materials to be ultra-lightweight, reducing unsprung mass for improved shock response and more predictable vehicle handling dynamics on the track.
- Manufacturer Part Number: 0500.225.0850
- Length: 5.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 850 lbs/in
- Engineered for maximum travel and smallest block heights
- High linearity and guaranteed rate consistency
- Individually tested and rated
- Compatible with diverse racing applications including shocks and pull-bars
📘 Guides & Manuals
The Eibach ERS (Eibach Race Springs) series is a modular system engineered for precision suspension tuning across professional racing disciplines. This single coilover spring features a 2.25-inch inner diameter and a 5.00-inch free length, providing an 800 lbs/in spring rate suitable for shocks, pull-bars, and various motorsport applications.
Eibach designs these springs to deliver maximum travel while maintaining the smallest possible block height. Manufactured from ultra-lightweight, high-tensile strength steel, they reduce unsprung mass for improved damping response. Every spring undergoes individual testing to guarantee the highest linearity and consistent performance across production batches, ensuring your chassis setup remains predictable under load.
- Manufacturer Part Number: 0500.225.0800
- Series: Eibach Race Springs (ERS)
- Inside Diameter: 2.25 in
- Free Length: 5.00 in
- Spring Rate: 800 lbs/in
- Material: High-tensile strength steel for reduced unsprung weight
- Design: Optimized for maximum travel and linearity
- Sold individually
📘 Guides & Manuals
Engineered for professional racing and precision suspension tuning, the Eibach ERS (Eibach Race Spring) system offers the customization required for competitive track applications. This linear-rate coilover spring is designed to provide maximum travel while maintaining the smallest possible block height, allowing for increased suspension articulation without binding.
Constructed from high-tensile spring steel, each unit is individually tested to guarantee the highest linearity and rate consistency. The ultra-lightweight design helps reduce unsprung mass, which directly improves shock absorber response and overall chassis control. These springs are the industry standard for fine-tuning handling dynamics on everything from primary coilovers to pull-bar setups.
- Manufacturer Part Number: 0500.225.0700
- Length: 5.00 inches
- Inside Diameter: 2.25 inches
- Spring Rate: 700 lbs/in
- Design: Linear-rate ERS series
- Features: High-tensile strength, ultra-lightweight, and individually tested
📘 Guides & Manuals
Can’t Find the Part You Need?
Our catalog represents only a portion of the automotive products available through our supplier network. If you cannot find a specific part, brand, or application on our website, submit a request below, and our team will help source it for you.
Please include as much information as possible, such as your vehicle's year, make, model, trim, engine, desired brand, or part number, to help us quickly identify the correct product.
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.