Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Easy Financing Available!
Your cart
-
0-9
-
A
-
B
-
R
-
S
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
Coilover Springs
Coilover springs are the heart of any adjustable suspension system, dictating ride height, handling balance, and compliance over bumps. Whether you're track-tuning a corner-carver or building a street-friendly coilover kit, spring rate, free length, and inside diameter are the critical specifications that determine how your car will respond.
This collection brings together a selection of coilover springs from reputable manufacturers, offered in both linear and progressive rates. Linear springs provide a consistent rate for predictable handling at the limit, while progressive springs deliver a softer initial travel for street comfort before ramping up under load. Use the filters to narrow by:
- Spring rate (lbs/in)
- Free length (inches)
- Inside diameter (ID) – typically 2.25", 2.5", or 60mm to match your perches
Material and finish matter too—look for high-tensile steel, often powder-coated or chrome-silicon for durability and corrosion resistance. Some springs are designed for specific damper bodies, while others are universal-fit with the right adapters. If you're unsure what you need, our suspension specialists can help you decode the numbers.
402 products
402 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Eibach Race Springs (ERS) provide professional-grade suspension tuning for competition use. This 10.00-inch free-length spring features a 2.50-inch inner diameter, engineered to deliver maximum travel while maintaining the smallest possible block height. By utilizing high-tensile wire, Eibach reduces unsprung mass, allowing for faster damper response and improved tire contact.
Each spring in the ERS lineup is individually tested to guarantee the highest linearity and rate consistency. Whether you are adjusting for corner weights or fine-tuning handling dynamics on a coil-over or pull-bar setup, these springs offer the precision required for high-performance racing environments.
- Inner Diameter: 2.50 in
- Free Length: 10.00 in
- Manufacturer Part Number: 1000.250.0250
- High-tensile steel construction for reduced unsprung weight
- Designed for maximum travel and minimal block height
- Individually tested for rate accuracy and linearity
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is the most comprehensive catalog of precision-engineered race springs in the industry. This 10.00-inch length coilover spring features a 2.50-inch inside diameter, designed for high-performance racing and off-road applications where suspension tuning is critical. Engineered for maximum travel and the smallest possible block height, these springs allow for increased wheel travel before coil bind.
- Inside Diameter: 2.50 inches
- Length: 10.00 inches
- Part Number: 1000.250.0225S
- Maximum Travel: Optimized design provides maximum travel in combination with the smallest block heights.
- High Linearity: Guaranteed consistency and linearity throughout the spring's stroke for predictable handling.
- Individually Tested: Each spring is individually tested and rated to ensure it meets strict Eibach tolerances.
- Off-Road Durability: Legendary Eibach construction capable of withstanding extreme racing environments.
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision handling and suspension tuning are critical. This linear coilover spring features a 9.00-inch length and 2.25-inch inside diameter with a 700 lbs/in rate, providing the predictable response required for high-performance track environments. Eibach race springs are designed to offer maximum travel in combination with the smallest block heights, effectively reducing unsprung mass while maintaining strict linearity across the compression stroke.
- Manufacturer Part Number: 0900.225.0700
- Length: 9.00 inches
- Inside Diameter: 2.25 inches
- Spring Rate: 700 lbs/in
- Construction: Ultra-lightweight material for reduced unsprung weight
- Performance: High linearity and guaranteed consistency
- Quality Control: Each spring is individually tested and rated
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications, offering the precision and consistency required for fine-tuning chassis dynamics. This 9.00-inch length spring features a 2.25-inch inner diameter, designed to provide maximum travel while maintaining the smallest possible block height. Each spring is individually tested and rated to ensure the highest level of linearity and performance for predictable handling on the track.
- Series: Eibach ERS (Eibach Race Spring)
- Length: 9.00 in (228.6 mm)
- Inner Diameter: 2.25 in (57 mm)
- Manufacturer Part Number: 0900.225.0600
- Ultra-lightweight design to reduce unsprung mass
- Guaranteed consistency and high linearity
- Engineered for maximum travel in combination with small block heights
- Each spring individually tested and verified
📘 Guides & Manuals
Optimize your racing suspension with the Eibach ERS (Eibach Race Spring) system. This 9.00-inch linear coilover spring is engineered for consistent performance and maximum travel, allowing for precise handling adjustments on coilover shocks and pull-bar setups.
Manufactured to strict tolerances, every ERS spring is individually tested to ensure highest linearity and guaranteed consistency across its range of travel. The ultra-lightweight design reduces unsprung mass, improving suspension response and overall vehicle dynamics by minimizing block heights and maximizing travel.
- Manufacturer Part Number: 0900.225.0550
- Length: 9.00 inches
- Inside Diameter (ID): 2.25 inches
- Spring Rate: 550 lbs/in
- Highest linearity and guaranteed rate consistency
- Ultra-lightweight for reduced unsprung mass
- Individually tested for accuracy
- Sold as a single spring
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for precision suspension tuning in professional motorsport and high-performance applications. Designed to provide maximum travel while maintaining the smallest possible block heights, these springs help prevent coil bind and ensure consistent handling under extreme loads. By utilizing high-tensile spring steel, Eibach achieves a lightweight profile that reduces unsprung mass, improving damper response and overall grip.
Every ERS spring is individually tested and manufactured to strict tolerances for linearity and rate accuracy. This 9-inch linear rate spring is part of a modular system that allows racers to fine-tune suspension dynamics, whether used as a primary spring or in a dual-spring setup on threaded-body coilovers.
- Manufacturer Part Number: 0900.225.0500
- Free Length: 9.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 500 lbs/in
- Material: Ultra-lightweight high-tensile steel
- Design: Highest linearity for predictable handling and guaranteed consistency
- Travel: Optimized for maximum travel with minimal block height
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is a precision-engineered suspension solution designed for professional racing and high-performance tuning. Part number 0900.225.0450 provides unparalleled customization and handling optimization across various motorsport applications, from standard coil-over shocks to pull-bar systems.
Built from high-tensile spring steel, this 9.00-inch length spring features a 2.25-inch inner diameter. It is engineered to achieve maximum suspension travel while maintaining the smallest possible block height. The ultra-lightweight construction reduces unsprung mass, which improves shock sensitivity and overall vehicle agility on the track.
- Manufacturer Part Number: 0900.225.0450
- Length: 9.00 inches
- Inner Diameter: 2.25 inches
- Highest linearity and guaranteed consistency across the stroke
- Individually tested for rate and dimensional accuracy
- Small block height for maximum usable travel
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision, predictability, and weight savings are critical for performance. This 8.00-inch coilover spring features a 2.50-inch inner diameter and is designed to provide maximum travel in combination with the smallest possible block heights, allowing for greater suspension articulation without coil bind.
Built for high linearity and guaranteed consistency, each ERS spring is individually tested to ensure it meets strict tolerances. The ultra-lightweight design reduces unsprung mass, improving shock response and overall chassis handling. Whether you are tuning shocks or pull-bars, these springs provide the reliable rates needed to optimize your vehicle's setup.
- Manufacturer Part Number: 0800.250.1100
- Series: ERS (Eibach Race Springs)
- Length: 8.00 in.
- Inside Diameter: 2.50 in.
- Features: Maximum travel, ultra-lightweight, high linearity
- Testing: Individually tested for rate accuracy and consistency
📘 Guides & Manuals
Engineered for professional motorsport and performance tuning, the Eibach ERS (Eibach Race Spring) system provides the precision and consistency required to optimize vehicle handling. This linear-rate coilover spring is designed for maximum travel while maintaining a compact block height, allowing for greater suspension articulation without premature coil bind.
Each ERS spring is manufactured using high-tensile strength cold-wound steel and undergoes individual testing to ensure it meets strict tolerance requirements. The ultra-lightweight construction reduces unsprung mass, improving damper response and overall chassis control. Designed to fit standard 2.50-inch ID coilover shocks and pull-bar systems, these springs are the industry standard for competitive racing applications.
- Manufacturer Part Number: 0800.250.1000
- Length: 8.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 1000 lbs/in
- Maximum travel in combination with smallest block heights
- Highest linearity and guaranteed consistency across the stroke
- Ultra-lightweight design for reduced unsprung mass
- Individually tested and rated for accuracy
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series is a modular suspension system engineered for professional racing and performance applications. This 8.00-inch free length spring is designed for high-performance coilover shocks, offering a precise 900 lbs/in rate to fine-tune vehicle handling and weight transfer. Manufactured using high-tensile strength materials, these springs provide maximum travel with minimal block height and reduced unsprung mass.
- Manufacturer Part Number: 0800.250.0900
- Free Length: 8.00 in.
- Inside Diameter (ID): 2.50 in.
- Spring Rate: 900 lbs/in
- Material: Ultra-lightweight, high-tensile cold-wound steel
- Performance: Guaranteed linearity and consistency across the full range of travel
- Testing: Each spring is individually tested and rated to meet Eibach's strict tolerances
Whether you are setting up a dedicated race car or a high-performance track vehicle, the ERS system provides the reliability and precision required for predictable suspension tuning and repeatable lap times.
📘 Guides & Manuals
The Eibach ERS (Eibach Race Springs) system is engineered for competitive racing, providing the precision and consistency required for fine-tuning handling dynamics. This 8.00-inch length linear spring features a 2.50-inch inner diameter, designed to fit a wide range of coilover shocks and pull-bar applications.
Built from high-tensile spring steel, these springs are optimized for maximum travel while maintaining the smallest possible block heights. The ultra-lightweight construction reduces unsprung mass, allowing for faster damper response and improved tire contact. Each spring is individually tested and rated to ensure the highest linearity and guaranteed rate consistency across the entire range of travel.
- Series: ERS (Eibach Race Springs)
- Length: 8.00 inches
- Inner Diameter (ID): 2.50 inches
- Spring Rate: 800 lbs/in
- Manufacturer Part Number: 0800.250.0800
- Construction: Ultra-lightweight high-strength spring steel
- Type: Linear rate coil-over spring
- Testing: Individually tested for rate accuracy and consistency
📘 Guides & Manuals
Part of the Eibach Race Spring (ERS) system, this high-performance coilover spring is engineered to provide precise suspension tuning for a wide range of racing applications. Manufactured with industry-leading tolerances, Eibach springs ensure consistent rates and linearity, allowing racers to fine-tune handling dynamics with confidence. This ultra-lightweight spring reduces unsprung mass, improving shock response and overall vehicle agility.
- Manufacturer Part Number: 0800.250.0700
- Length: 8.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 700 lbs
- Design: Maximum travel with the smallest possible block heights
- Quality Control: Each spring is individually tested and rated for guaranteed consistency
- Applications: Fits standard 2.50-inch coilover shocks and pull-bars
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series is engineered for professional racing and high-performance suspension tuning. This 8-inch coilover spring is designed to deliver maximum travel while maintaining a minimal block height, preventing coil bind during aggressive suspension compression. Every Eibach ERS spring is manufactured with high-tensile wire and individually tested to ensure strict linearity and rate consistency.
By utilizing ultra-lightweight materials, this spring reduces unsprung mass, allowing for faster damper response and improved mechanical grip. Whether you are fine-tuning a coilover setup or a pull-bar system, the Eibach ERS 0800.250.0600 provides the precision required for predictable handling on the track.
- Length: 8.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 600 lbs/in
- MPN: 0800.250.0600
- Series: Eibach Race Spring (ERS)
- Maximum travel with compact block heights
- High linearity for predictable weight transfer
- Individually tested for guaranteed consistency
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series is engineered for professional racing and high-performance suspension tuning. This 8.00-inch coilover spring features a 2.50-inch inner diameter and a linear 550 lbs/in spring rate, providing the precision required for fine-tuning vehicle handling dynamics. Developed to offer maximum travel in combination with the smallest block heights, these springs allow for more suspension stroke without coil bind.
- Manufacturer Part Number: 0800.250.0550
- Length: 8.00 inches (203 mm)
- Inside Diameter: 2.50 inches (64 mm)
- Spring Rate: 550 lbs/in
- Linear Design: Highest linearity and guaranteed consistency for predictable damping
- Lightweight Construction: Engineered to reduce unsprung mass for improved tire contact and response
- Quality Tested: Each spring is individually tested and rated to ensure it meets strict Eibach tolerances
📘 Guides & Manuals
Eibach ERS (Eibach Race Springs) are precision-engineered for professional racing and high-performance suspension tuning. This 8.00-inch coilover spring is designed to provide consistent performance and maximum travel for race cars using 2.50-inch diameter dampers.
Constructed from high-tensile spring steel, these springs offer a high degree of linearity and are individually tested to ensure they meet strict tolerances. The ultra-lightweight design helps reduce unsprung mass, improving suspension response and allowing for more precise handling adjustments from shocks to pull-bars.
- Length: 8.00 inches
- Inner Diameter: 2.50 inches
- Spring Rate: 500 lbs/in
- Manufacturer Part Number: 0800.250.0500
- Material: High-tensile steel construction
- Maximum travel with minimal block height for increased suspension stroke
- Guaranteed consistency and linearity across the full range of travel
- Each spring is individually tested and rated
📘 Guides & Manuals
The Eibach ERS (Eibach Race Springs) series is engineered for professional racing and high-performance suspension tuning. This 8.00-inch linear spring features a 2.50-inch inner diameter and a 450 lbs/in rate, designed to deliver maximum suspension travel while maintaining a compact block height.
Built from high-tensile spring steel, these springs are ultra-lightweight to minimize unsprung mass, improving shock response and overall handling dynamics. Each spring undergoes individual testing to ensure strict tolerance compliance, guaranteeing the linearity and consistency required for precision chassis setups on circuit, off-road, or drag racing applications.
- Length: 8.00 inches (203 mm)
- Inner Diameter: 2.50 inches (64 mm)
- Spring Rate: 450 lbs/in
- MPN: 0800.250.0450
- Series: ERS (Eibach Race Springs)
- Highest linearity and guaranteed rate consistency
- Small block height for maximum usable travel
- Individually tested and rated for accuracy
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is the industry standard for precision suspension tuning in professional racing. Designed to meet the demands of diverse motorsport applications, this 8.00-inch coilover spring provides a 400 lbs/in rate with a 2.50-inch inner diameter, ensuring compatibility with a wide range of racing shocks and pull-bar setups.
Engineering for performance means maximizing travel while minimizing block height. These springs are manufactured from high-tensile strength steel to reduce unsprung mass, allowing for faster suspension reaction times and more consistent contact patches. Every Eibach ERS spring is individually tested to guarantee the highest linearity and rate accuracy across its entire stroke.
- Manufacturer Part Number: 0800.250.0400
- Free Length: 8.00 inches (203 mm)
- Inner Diameter: 2.50 inches (64 mm)
- Spring Rate: 400 lbs/in (7.1 kg/mm)
- Construction: Ultra-lightweight high-tensile steel for reduced unsprung weight
- Quality Control: Individually tested for linearity and rate consistency
- Travel: Maximum travel with smallest block heights
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) is a precision-engineered coilover spring designed for professional racing and high-performance suspension tuning. This 8.00-inch length spring features a 2.50-inch inner diameter and a 350 lbs/in rate, providing a reliable solution for optimizing vehicle handling dynamics and cornering stability.
Constructed for maximum travel with the smallest block heights, these springs utilize an ultra-lightweight design to reduce unsprung mass and improve damper response. Every ERS spring is individually tested to guarantee the highest linearity and consistency, ensuring predictable performance on the track or the street.
- Manufacturer Part Number: 0800.250.0350
- Length: 8.00 inches
- Inner Diameter: 2.50 inches
- Spring Rate: 350 lbs/in
- Engineered for maximum travel and minimal block height
- Ultra-lightweight construction for reduced unsprung mass
- Individually tested to ensure rate consistency and linearity
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for precision performance across a wide spectrum of racing disciplines. This 8.00-inch length coil-over spring features a 2.50-inch inside diameter, designed to provide consistent handling dynamics for shocks, pull-bars, and custom suspension setups.
Built for durability and performance, these springs are optimized to provide maximum suspension travel while maintaining the smallest possible block heights. Each spring is manufactured with high-tensile steel to ensure the linearity and rate consistency required by professional racers and chassis tuners.
- Dimensions: 8.00" Length x 2.50" Inside Diameter
- Maximum Travel: Engineered to optimize stroke and minimize block height for better suspension articulation.
- Precision Testing: Each spring is individually tested and verified to meet strict tolerance standards.
- Durability: Proven Eibach off-road durability for reliable performance in harsh racing environments.
- MPN: 0800.250.0300S
📘 Guides & Manuals
Engineered for professional motorsport and competitive track use, the Eibach ERS (Eibach Race Springs) system offers the precision and consistency required for fine-tuning handling dynamics. This 8-inch coilover spring is designed to provide maximum travel while maintaining the smallest possible block height, significantly reducing the risk of coil bind during aggressive suspension compression.
Constructed from high-tensile materials, these springs minimize unsprung mass to improve damper response. Every spring in the ERS line is individually tested and rated to guarantee highest linearity and consistent performance across its entire travel range, whether used on shocks, pull-bars, or complex multi-spring setups.
- Manufacturer Part Number: 0800.250.0300
- Free Length: 8.00 inches
- Inside Diameter: 2.50 inches
- Spring Rate: 300 lbs/in
- Material: Ultra-lightweight high-tensile steel
- Features: Smallest block heights for maximum travel, individually tested for rate accuracy
📘 Guides & Manuals
Engineered for professional racing and high-performance suspension tuning, the Eibach ERS (Eibach Race Spring) system provides the precision and consistency required for competitive driving. This single-rate coilover spring is part of a modular system designed to allow for fine-tuned handling dynamics and optimized suspension geometry.
Constructed with high-tensile strength wire, these springs are designed to offer maximum travel while maintaining the smallest possible block heights. This design reduces unsprung mass and prevents premature coil bind during aggressive cornering or high-load scenarios. Each spring undergoes individual testing to ensure the highest linearity and guaranteed rate consistency, providing predictable feedback through the shock absorber and chassis.
- Manufacturer Part Number: 0800.250.0275
- Spring Length: 8.00 inches
- Inside Diameter (ID): 2.50 inches
- Spring Rate: 275 lbs/in
- Series: Eibach Race Springs (ERS)
- Build: Ultra-lightweight design for reduced unsprung weight
- Quality Control: Individually tested for rate accuracy and linearity
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is the world's most prolific and successful racing spring series. This 8.00-inch coilover spring is engineered to provide the maximum travel possible within the smallest block heights, allowing for precise suspension tuning in a wide range of motorsport applications from shocks to pull-bars.
- Precision Engineering: High-linearity design ensures predictable handling and guaranteed consistency across every stroke.
- Performance Optimization: Ultra-lightweight construction reduces unsprung mass, improving damper response and chassis control.
- Individual Testing: Each spring is individually tested and rated to ensure it meets strict Eibach tolerances before leaving the factory.
- Technical Specs: 8.00-inch length, 2.50-inch inner diameter, and a 250 lbs/in spring rate.
Manufacturer Part Number: 0800.250.0250
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) 0800.225.0850 is a precision-engineered suspension component designed for professional racing and high-performance tuning. With an 8.00-inch free length and a 2.25-inch inner diameter, these springs allow for precise adjustment of corner weights and handling dynamics. Eibach utilizes high-tensile strength wire to create an ultra-lightweight spring that reduces unsprung mass while maintaining the smallest possible block heights.
Built for consistency and predictability, each ERS spring is individually tested to ensure it meets strict tolerances for linearity and rate accuracy. Whether used on coil-over shocks or pull-bars, these springs provide maximum travel and reliable performance under the extreme loads of track use.
- Manufacturer Part Number: 0800.225.0850
- Series: Eibach Race Spring (ERS)
- Length: 8.00 inches
- Inner Diameter: 2.25 inches
- Linearity: Engineered for highest linearity and guaranteed consistency
- Testing: Each spring is individually tested and rated
- Design: Maximum travel combined with minimal block height
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision, consistency, and weight are critical to performance. This 8.00-inch linear coilover spring provides the reliability needed for high-load environments, offering maximum travel in combination with the smallest block heights to prevent coil bind during aggressive suspension compression.
Crafted from ultra-lightweight materials to reduce unsprung mass, every ERS spring is individually tested to guarantee the highest linearity and rate consistency. These springs are ideal for fine-tuning handling dynamics on shocks and pull-bar setups, ensuring your suspension responds predictably lap after lap.
- Length: 8.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 800 lbs/in
- Manufacturer Part Number: 0800.225.0800
- High-tensile strength construction for reduced weight and increased travel
- Individually tested to ensure guaranteed rate consistency
- Linear rate design for predictable suspension tuning
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications, providing the precision and consistency required to fine-tune vehicle handling dynamics. This 8.00-inch length spring features a 2.25-inch inner diameter, designed to work seamlessly with a variety of high-performance shocks and pull-bar setups.
Eibach race springs are manufactured to offer maximum travel while maintaining the smallest possible block heights. By utilizing ultra-lightweight materials to reduce unsprung mass, these springs help maintain tire contact and improve suspension response. Every spring is individually tested to ensure it meets strict tolerances for linearity and rate consistency.
- Series: Eibach Race Spring (ERS)
- Manufacturer Part Number: 0800.225.0750
- Length: 8.00 inches
- Inner Diameter (ID): 2.25 inches
- Design: Ultra-lightweight construction for reduced unsprung mass
- Performance: Maximum travel with minimal block height
- Quality Control: Each spring is individually tested for linearity and consistency
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) series is engineered for professional racing and performance applications, providing the precision required for fine-tuning handling dynamics. This 8.00-inch coilover spring features a 2.25-inch inner diameter and a 700 lbs/in rate, designed to maximize suspension travel while maintaining a compact block height to prevent coil bind during heavy compression.
Built to handle the rigors of the track, Eibach ERS springs are recognized for their high linearity and guaranteed rate consistency. The ultra-lightweight construction reduces unsprung mass, allowing your dampers to react more efficiently to surface changes and driver inputs. Each spring is individually tested and rated to ensure it meets strict tolerances before leaving the factory.
- Manufacturer Part Number: 0800.225.0700
- Free Length: 8.00 inches
- Inside Diameter: 2.25 inches
- Spring Rate: 700 lbs/in
- High-tensile strength for maximum travel
- Ultra-lightweight design to reduce unsprung weight
- Individually tested for rate accuracy and linearity
📘 Guides & Manuals
Engineered for professional racing applications, the Eibach ERS (Eibach Race Spring) series provides the customization and precision required to fine-tune your suspension's handling dynamics. This coilover spring is designed to provide maximum travel while maintaining a compact block height, effectively reducing unsprung mass for faster suspension response and more consistent grip.
- Manufacturer Part Number: 0800.225.0650
- Length: 8.00 inches (203.2 mm)
- Inner Diameter: 2.25 inches (57 mm)
- Spring Rate: 650 lbs/in
- Material: High-tensile, ultra-lightweight spring steel
- Performance: High linearity and guaranteed rate consistency
- Testing: Each spring is individually tested and rated to ensure accuracy
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for competitive racing applications where precision and consistency are critical for suspension tuning. This 8.00-inch coilover spring provides maximum travel in combination with one of the smallest block heights in the industry, allowing for more suspension movement before coil bind occurs.
Manufactured using high-tensile strength materials, the ERS series is designed to be ultra-lightweight. This reduction in unsprung mass allows shocks and dampers to respond faster to track surface changes. Every spring is individually tested and rated to guarantee highest linearity and consistent performance across the entire travel range, ensuring your setup remains predictable lap after lap.
- Manufacturer Part Number: 0800.225.0600
- Length: 8.00 inches
- Inner Diameter: 2.25 inches
- Spring Rate: 600 lbs/in
- Series: Eibach Race Springs (ERS)
- High-tensile steel construction for reduced weight
- Individually tested for rate accuracy and linearity
📘 Guides & Manuals
The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision and customization are critical. This 8.00-inch length spring features a 2.25-inch inner diameter, designed to integrate with a wide variety of coilover shocks and pull-bar setups to fine-tune your vehicle's handling dynamics.
Constructed for performance optimization, these springs offer maximum travel combined with the smallest possible block heights to prevent coil bind. The ultra-lightweight design reduces unsprung mass for improved suspension response, while high linearity ensures predictable performance. Every spring is individually tested to guarantee consistency and meet Eibach's rigorous engineering standards.
- Series: Eibach Race Springs (ERS)
- Length: 8.00 in.
- Inner Diameter: 2.25 in.
- Part Number: 0800.225.0550
- Testing: Individually tested for linearity and consistency
- Features: Ultra-lightweight for reduced unsprung mass and maximum travel
📘 Guides & Manuals
The Eibach ERS (Eibach Race Springs) system is engineered for professional racing applications where suspension precision is non-negotiable. This 8.00-inch length spring features a 2.25-inch inner diameter and a 500 lbs/in rate, providing the predictable response required for fine-tuning vehicle handling and corner weights. Built to withstand the rigors of competition, these springs maintain their rate and height even under extreme cycling.
By utilizing high-tensile strength alloys, Eibach achieves a lightweight design that reduces unsprung mass while providing maximum travel and the smallest possible block heights. Each ERS spring is individually tested and rated to ensure guaranteed linearity and consistency across every lap. This precision allows racers to make repeatable suspension adjustments based on track conditions and driver feedback.
- Part Number: 0800.225.0500
- Length: 8.00 in
- Inner Diameter: 2.25 in
- Spring Rate: 500 lbs/in
- Maximum travel in combination with minimal block height
- High-linearity design for consistent performance
- Ultra-lightweight construction to improve suspension response
- Individually tested for rate accuracy
📘 Guides & Manuals
Can’t Find the Part You Need?
Our catalog represents only a portion of the automotive products available through our supplier network. If you cannot find a specific part, brand, or application on our website, submit a request below, and our team will help source it for you.
Please include as much information as possible, such as your vehicle's year, make, model, trim, engine, desired brand, or part number, to help us quickly identify the correct product.
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.