The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance suspension tuning. This 8.00-inch coilover spring features a 2.25-inch inner diameter and a 450 lbs/in spring rate, providing the precision needed to dial in handling dynamics and corner weights for competition use.

Constructed for maximum travel and minimal block height, these springs are designed to reduce unsprung mass while maintaining the highest linearity in the industry. Every ERS spring is individually tested to ensure guaranteed consistency and performance under grueling race conditions, from shocks to pull-bar applications.

• Series: Eibach Race Spring (ERS)
• Length: 8.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 450 lbs/in
• MPN: 0800.225.0450
• Ultra-lightweight design for reduced unsprung weight
• Individually tested for rate accuracy and linearity
• High-tensile strength material for maximum travel and smallest block heights

The Eibach ERS (Eibach Race Spring) system is the industry standard for professional motorsport suspension tuning. This 8.00-inch coilover spring is engineered with a 2.25-inch inner diameter and a 350 lb/in spring rate to provide the precision and predictability required for competitive racing applications.

Eibach race springs are manufactured to achieve maximum travel in combination with the smallest possible block heights. By utilizing high-tensile spring steel, these springs reduce unsprung mass and offer the highest linearity and guaranteed consistency. Every spring is individually tested to ensure it meets exact rate specifications before leaving the factory.

• Part Number: 0800.225.0350
• Length: 8.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 350 lb/in
• Material: High-tensile spring steel for reduced weight and durability
• Performance: Linear rate design for consistent handling dynamics
• Reliability: Individually tested for rate accuracy and tolerance

The Eibach ERS (Eibach Race Spring) system is designed for professional racing and high-performance applications where precision suspension tuning is critical. This 8.00-inch coil-over spring features a 2.25-inch inner diameter (ID), engineered to provide maximum travel while maintaining the smallest possible block height to prevent premature coil bind.

• Precision Engineering: High linearity and guaranteed consistency ensure predictable handling during high-load cornering and suspension cycling.
• Weight Optimization: Ultra-lightweight construction reduces unsprung mass, allowing dampers to react more quickly to track irregularities.
• Rigorous Testing: Each spring is individually tested and rated to verify it meets Eibach’s strict tolerances before leaving the factory.
• Versatile Application: Compatible with a wide range of coil-over shocks and pull-bar systems for specialized racing setups.
• Manufacturer Part Number: 0800.225.0300

The Eibach ERS (Eibach Race Spring) series is engineered for precision suspension tuning across diverse racing applications. This 8-inch coilover spring (MPN: 0800.225.0250) features a 2.25-inch inner diameter and a 250 lbs/in rate, providing the high linearity and consistency required for predictable handling on the track.

Constructed to maximize travel while maintaining a small block height, this ultra-lightweight spring reduces unsprung mass to improve damper response. Every Eibach ERS spring is individually tested to guarantee rate accuracy and performance longevity under racing conditions.

• Manufacturer Part Number: 0800.225.0250
• Length: 8.00 inches
• Inside Diameter: 2.25 inches
• Spring Rate: 250 lbs/in
• Linearity: High-linearity design for consistent performance
• Design: Maximum travel with minimized block height
• Quality: Each spring is individually tested and validated

The Eibach ERS (Eibach Race Spring) system is a precision-engineered suspension solution designed for professional racing and high-performance tuning. This 7.00-inch length spring with a 2.50-inch inner diameter is manufactured from high-tensile spring steel to provide maximum travel while maintaining the smallest possible block height. This allows for increased suspension stroke and prevents coil bind in demanding motorsport environments.

Every Eibach ERS spring is individually tested and rated to ensure the highest linearity and guaranteed consistency across the entire compression range. The ultra-lightweight design significantly reduces unsprung mass, allowing for faster damper response and improved mechanical grip. These springs are suitable for use in coil-over shocks, pull-bars, and various custom suspension configurations where predictable handling is critical.

• Manufacturer Part Number: 0700.250.0900
• Length: 7.00 in (177.8 mm)
• Inner Diameter: 2.50 in (63.5 mm)
• Spring Rate: 900 lbs/in
• High-tensile spring steel construction
• Engineered for maximum travel and minimal block height
• Individually tested for rate accuracy and linearity

The Eibach ERS (Eibach Race Spring) series is engineered for professional motorsport and high-performance applications, offering the precision and consistency required to fine-tune vehicle handling dynamics. This 7.00-inch length spring features a 2.50-inch inner diameter, designed to integrate seamlessly with various coilover shocks and pull-bar systems.

Manufactured to meet the most demanding racing tolerances, Eibach ERS springs provide maximum travel in combination with the smallest block heights. The ultra-lightweight design reduces unsprung mass, allowing suspension components to react faster to track surface changes for improved mechanical grip and stability.

• Series: Eibach Race Spring (ERS)
• Length: 7.00 in (177.8 mm)
• Inner Diameter (ID): 2.50 in (63.5 mm)
• Manufacturer Part Number: 0700.250.0800
• High Linearity: Guaranteed consistency throughout the spring stroke
• Construction: High-tensile spring steel for durability and weight reduction
• Quality Control: Each spring is individually tested and rated

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications requiring precise suspension tuning and predictable handling dynamics. This 7.00-inch length coil-over spring features a 2.50-inch inner diameter and a 700 lbs/in spring rate, designed to provide the highest linearity and guaranteed consistency across its entire travel range.

Constructed using high-tensile materials, these springs are ultra-lightweight to effectively reduce unsprung mass. The design focus ensures maximum suspension travel in combination with the smallest possible block heights, preventing premature coil-bind during aggressive cornering or high-load scenarios. Each spring is individually tested to meet Eibach's strict tolerances for performance optimization.

• Length: 7.00 in (177.8 mm)
• Inner Diameter: 2.50 in (63.5 mm)
• Spring Rate: 700 lbs/in
• High-tensile steel construction for reduced weight
• Maximum travel with minimum block height
• High linearity and guaranteed rate consistency
• Individually tested and rated
• Manufacturer Part Number: 0700.250.0700

The Eibach ERS (Eibach Race Spring) is a precision-engineered coilover spring designed for motorsports and high-performance suspension tuning. These springs provide the consistency and linearity required for predictable handling dynamics across a wide range of racing applications, from shocks to pull-bars.

Engineered to deliver maximum travel in combination with the smallest block heights, the ERS series helps prevent coil bind while optimizing suspension geometry. Each spring is manufactured using high-tensile materials to minimize unsprung mass and is individually tested to ensure it meets strict rate tolerances and performance standards.

• Manufacturer Part Number: 0700.250.0600
• Spring Length: 7.00 inches
• Inside Diameter: 2.50 inches
• Spring Rate: 600 lbs/in
• Construction: Ultra-lightweight for reduced unsprung weight
• Performance: High linearity and guaranteed consistency for precision tuning
• Testing: Each spring is individually tested and verified

Eibach ERS (Eibach Race Springs) are engineered for precision handling and repeatable performance in professional racing environments. This 7.00-inch coilover spring features a 2.50-inch inside diameter and a 550 lbs/in spring rate, designed to provide maximum travel with minimal block height. Built for racers who require precise tuning for shocks or pull-bars, these springs offer the consistency needed for high-stakes competition.

• Manufactured from high-tensile strength steel to reduce unsprung mass while maintaining durability.
• Exceptional linearity and tight tolerances ensure predictable weight transfer and handling.
• Compact design provides maximum suspension travel with the smallest possible block heights.
• Each spring is individually tested and rated to guarantee accuracy across the entire ERS line.
• Manufacturer Part Number: 0700.250.0550

Fine-tune your vehicle's handling dynamics with the Eibach ERS (Eibach Race Spring) system. This 7.00-inch length coilover spring is engineered for professional racing applications where precision and consistency are paramount. Designed with a 2.50-inch inside diameter, it integrates seamlessly with a wide range of aftermarket coilover shocks and hardware.

Eibach ERS springs are manufactured to provide maximum travel while maintaining the smallest possible block heights. The ultra-lightweight design reduces unsprung mass, allowing the dampers to react more quickly to track surface changes. Every spring is individually tested to ensure highest linearity and guaranteed rate consistency, providing the predictable performance required for competitive environments.

• Manufacturer Part Number: 0700.250.0500
• Length: 7.00 inches
• Inside Diameter: 2.50 inches
• Spring Rate: 500 lbs/in
• High-linearity design for consistent handling
• Reduced unsprung mass for improved suspension response
• Individually tested for rate accuracy

The Eibach ERS (Eibach Race Springs) system is a premier choice for professional racing, offering the precision and consistency required for track use. This 7-inch coilover spring features a 2.50-inch inner diameter and a 450 lbs/in spring rate, designed to provide predictable handling and maximum travel before coil bind.

By utilizing high-tensile spring steel, Eibach minimizes block heights and reduces unsprung mass for improved suspension response. Each spring is individually tested to ensure rate accuracy and high linearity throughout the entire stroke.

• Manufacturer Part Number: 0700.250.0450
• Length: 7.00 inches
• Inner Diameter: 2.50 inches
• Spring Rate: 450 lbs/in
• Maximum travel in combination with the smallest block heights
• Ultra-lightweight design for reduced unsprung mass
• Highest linearity and guaranteed consistency across all racing applications
• Individually tested and measured for quality assurance

The Eibach ERS (Eibach Race Springs) system is a precision-engineered solution for fine-tuning racing suspension dynamics. This 7.00-inch linear coilover spring is designed for high-performance applications including shocks and pull-bars requiring a 2.50-inch internal diameter.

Manufactured to exacting tolerances, Eibach ERS springs provide maximum travel with minimal block height, allowing for greater suspension articulation without premature coil bind. Each spring is individually tested to ensure consistent performance and precise linearity throughout its stroke. The ultra-lightweight construction reduces unsprung mass, improving the responsiveness of the damping system.

• Series: ERS (Eibach Race Springs)
• Length: 7.00 in
• Inside Diameter: 2.50 in
• Spring Rate: 400 lbs/in
• MPN: 0700.250.0400
• Linear rate design for predictable handling characteristics
• High-tensile strength steel construction for durability and weight savings
• Individually tested and guaranteed for rate consistency

Engineered for professional racing and high-performance suspension tuning, the Eibach ERS (Eibach Race Spring) 0700.250.0350 provides the precision and consistency required for competitive applications. This 7-inch long spring features a 2.50-inch inner diameter and a 350 lb/in rate, designed to work seamlessly with a wide range of coilover shock bodies and pull-bars.

Eibach ERS springs are manufactured to the tightest tolerances in the industry, ensuring highest linearity and guaranteed rate consistency. The ultra-lightweight design reduces unsprung mass, while the engineering focus on maximum travel and small block heights prevents premature coil bind during aggressive maneuvers.

• Series: Eibach Race Springs (ERS)
• Length: 7.00 inches
• Inner Diameter: 2.50 inches
• Spring Rate: 350 lbs/in
• Part Number: 0700.250.0350
• Construction: High-tensile, ultra-lightweight steel
• Testing: Individually tested and verified for rate accuracy

Eibach Race Springs (ERS) are engineered for professional racing applications where precision handling and suspension tuning are critical. This 7.00-inch coilover spring (MPN: 0700.250.0325) features a 2.50-inch inside diameter and a 325 lbs/in rate, providing the linearity and consistency needed for predictable chassis behavior on the track.

Designed to deliver maximum travel in combination with the smallest possible block heights, these springs help reduce unsprung mass and improve shock response. Each spring is individually tested and rated to ensure it meets Eibach's strict tolerances, making it an essential component for fine-tuning corner weights and suspension dynamics for any race application from shocks to pull-bars.

• Manufacturer Part Number: 0700.250.0325
• Length: 7.00 inches
• Inside Diameter: 2.50 inches
• Spring Rate: 325 lbs/in
• Linearity: Precision engineered for consistent performance throughout the stroke
• Construction: Ultra-lightweight material for reduced unsprung mass
• Quality Control: Each spring is individually tested for guaranteed consistency

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications requiring precise handling and consistent performance. This 7-inch coil-over spring features a 2.50-inch inner diameter and is designed to provide maximum travel with a minimal block height, significantly reducing the risk of coil bind during aggressive suspension cycling.

Manufactured from high-tensile strength spring steel, these ultra-lightweight springs help reduce unsprung mass to improve damper response and overall grip. Every ERS component is individually tested to ensure high linearity and guaranteed rate consistency, allowing for predictable chassis adjustments and reliable performance on the track.

• Manufacturer Part Number: 0700.250.0300
• Free Length: 7.00 inches
• Inner Diameter: 2.50 inches
• Spring Rate: 300 lbs/in
• Material: High-tensile, ultra-lightweight spring steel
• Design: Maximum travel with smallest block heights
• Quality: Each spring is individually tested for accuracy and linearity

The Eibach ERS (Eibach Race Spring) system is a modular spring program developed for professional racing and high-performance suspension tuning. This 7.00-inch length coilover spring features a 2.50-inch inner diameter and a 250 lbs/in spring rate, designed to provide consistent handling dynamics and predictable suspension response under extreme loads.

Manufactured from high-tensile strength spring steel, these springs are engineered to achieve maximum travel with the smallest possible block heights to prevent premature coil bind. Each spring undergoes individual testing to guarantee rate linearity and consistency, ensuring your chassis setup remains precise from the green flag to the checkered.

• Manufacturer Part Number: 0700.250.0250
• Length: 7.00 inches
• Inside Diameter: 2.50 inches
• Spring Rate: 250 lbs/in
• Ultra-lightweight construction reduces unsprung mass for faster damper reaction
• Highest linearity and guaranteed consistency for predictable performance
• Individually tested and rated to ensure precision tolerances
• Designed for maximum travel in combination with minimal block height

The Eibach ERS (Eibach Race Spring) system is a precision-engineered solution for professional racing and performance suspension tuning. This linear-rate coilover spring is designed to provide maximum travel in combination with the smallest block heights, allowing for greater suspension articulation without coil bind.

Constructed from high-tensile strength steel, this spring is ultra-lightweight to reduce unsprung mass, improving damper response and overall chassis control. Each ERS spring is individually tested to ensure the highest linearity and guaranteed consistency across the entire range of travel, making it an essential component for fine-tuning handling dynamics on shocks or pull-bars.

• Manufacturer Part Number: 0700.225.1100
• Free Length: 7.00 inches
• Inside Diameter: 2.25 inches
• Spring Rate: 1100 lbs/in
• Construction: High-tensile spring steel for reduced weight and increased travel
• Testing: Individually dyno-tested for rate accuracy and linearity

The Eibach ERS (Eibach Race Spring) is engineered for professional racing applications where precise handling and predictable suspension response are critical. This 7.00-inch coilover spring features a 2.25-inch inner diameter and a 1000 lbs/in spring rate, designed to provide high linearity and guaranteed consistency throughout its travel range.

Constructed from ultra-lightweight materials to reduce unsprung mass, Eibach race springs are optimized to achieve maximum travel with the smallest possible block height. This allows for greater suspension articulation without the risk of coil bind. Each spring is individually tested and rated to ensure it meets strict performance tolerances before leaving the factory.

• Length: 7.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 1000 lbs/in
• Series: Eibach Race Spring (ERS)
• MPN: 0700.225.1000
• Construction: High-tensile, ultra-lightweight spring steel

The Eibach ERS (Eibach Race Spring) 0700.225.0900 is engineered for precision suspension tuning across professional racing applications. Designed to deliver maximum travel while maintaining the smallest possible block heights, these springs allow for fine-tuned handling dynamics on shock and pull-bar setups.

Every spring is manufactured with high-tensile materials to ensure highest linearity and guaranteed consistency. The ultra-lightweight design reduces unsprung mass for improved suspension response, and each unit is individually tested to verify its performance profile before leaving the factory.

• Inner Diameter: 2.25 in
• Free Length: 7.00 in
• Spring Rate: 900 lbs/in
• Manufacturer Part Number: 0700.225.0900
• High-linearity design for predictable handling
• Individually tested and rate-verified
• Optimized for maximum travel and reduced block height

Fine-tune your race car's handling with the Eibach ERS (Eibach Race Spring) system. Designed for professional racing applications, this 7.00-inch length coil-over spring features a 2.25-inch inner diameter and is engineered to provide maximum travel with the smallest possible block height. Part of Eibach's precision-engineered catalog, these springs allow for unparalleled customization on shocks, pull-bars, and other suspension components.

• Precise Engineering: Manufactured with highest linearity and guaranteed consistency for predictable suspension behavior.
• Lightweight Design: Ultra-lightweight construction reduces unsprung mass to improve damper response and overall grip.
• Individually Tested: Each spring is individually tested and rated to ensure it meets strict performance tolerances.
• Specifications: 7.00" length, 2.25" inside diameter, and identified by manufacturer part number 0700.225.0850.

The Eibach ERS (Eibach Race Spring) series is engineered for professional racing applications, offering precision handling and performance optimization. This 7.00-inch coilover spring is designed with a 2.25-inch inside diameter and an 800 lbs/in spring rate, providing the high linearity and consistency required for predictable suspension dynamics. Developed to deliver maximum travel while maintaining the smallest possible block height, these springs are a critical component for fine-tuning shocks and pull-bars.

• Length: 7.00 inches
• Inside Diameter: 2.25 inches
• Spring Rate: 800 lbs/in
• MPN: 0700.225.0800
• Ultra-lightweight design reduces unsprung mass for improved suspension response.
• Individually tested and rated to ensure guaranteed consistency across racing applications.
• Highest linearity ensures stable performance throughout the suspension stroke.

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and performance applications where precision handling and weight reduction are critical. This 7.00-inch coilover spring features a 2.25-inch inner diameter and a 750 lbs/in rate, designed to provide consistent, predictable performance through its entire travel range.

Manufactured with high-tensile materials, these springs achieve maximum travel with remarkably low block heights. This design reduces unsprung mass and prevents coil bind, allowing for more aggressive suspension tuning. Every ERS spring is individually tested to ensure high linearity and rate consistency from corner to corner.

• Manufacturer Part Number: 0700.225.0750
• Length: 7.00 inches
• Inside Diameter: 2.25 inches
• Spring Rate: 750 lbs/in
• Series: Eibach Race Springs (ERS)
• Construction: Ultra-lightweight for reduced unsprung mass
• Quality: Individually tested for guaranteed rate consistency

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision and consistency are paramount. This 7.00-inch coilover spring features a 2.25-inch inner diameter and a 700 lbs/in spring rate, designed to provide maximum travel while maintaining a compact block height to prevent coil bind during high-load maneuvers.

Each Eibach ERS spring is manufactured from high-tensile strength steel and is individually tested to ensure highest linearity and guaranteed rate consistency. The ultra-lightweight design reduces unsprung mass, allowing your suspension to react faster to track irregularities and improving overall mechanical grip and handling dynamics.

• Manufacturer Part Number: 0700.225.0700
• Spring Length: 7.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 700 lbs/in
• High-tensile construction for maximum travel and minimal block height
• Individually tested for rate accuracy and linearity
• Lightweight design reduces unsprung mass

Fine-tune your vehicle's handling with the Eibach ERS (Eibach Race Spring) system, engineered for precision and performance in demanding racing environments. This 7-inch linear coilover spring provides consistent response and maximum travel, allowing for optimized suspension tuning across various shock and pull-bar setups.

Constructed with a focus on reduced unsprung mass, these ultra-lightweight springs feature small block heights and guaranteed linearity. Each Eibach race spring is individually tested to ensure it meets strict tolerances, providing the reliability and consistency needed for competitive motorsport applications.

• Series: Eibach Race Spring (ERS)
• Length: 7.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 650 lbs/in
• Part Number: 0700.225.0650
• Maximum travel with minimized block height
• Individually tested for guaranteed rate consistency
• High-tensile wire construction for reduced unsprung weight

Eibach ERS (Eibach Race Spring) series coilover springs are engineered for professional racing and high-performance suspension tuning. Designed to deliver maximum travel with minimal block heights, these springs allow for precise handling adjustments across various motorsport applications, including shocks and pull-bar configurations.

Each spring is manufactured to exacting tolerances to ensure high linearity and guaranteed consistency throughout its service life. The ultra-lightweight design reduces unsprung mass, which improves suspension response and overall vehicle dynamics. Every individual spring is tested to verify it meets strict performance specifications before leaving the factory.

• Part Number: 0700.225.0600
• Free Length: 7.00 inches
• Inner Diameter (ID): 2.25 inches
• Spring Rate: 600 lbs/in
• Material: High-tensile strength spring steel
• Optimized for maximum travel and reduced unsprung weight
• Individually tested for rate consistency

Fine-tune your racing suspension with the Eibach ERS (Eibach Race Spring) system, engineered for high-performance applications from shocks to pull-bars. This precision-wound coilover spring provides the linearity and consistency required for predictable handling on the track. By utilizing high-tensile strength steel, Eibach achieves maximum travel with a minimal block height, allowing for more suspension movement before coil bind occurs.

• Length: 7.00 inches
• Inner Diameter: 2.25 inches
• Spring Rate: 550 lbs/in
• Material: Ultra-lightweight high-tensile steel for reduced unsprung mass
• Quality Control: Each spring is individually tested and rated to ensure exact tolerances
• Series: ERS (Eibach Race Springs)
• Part Number: 0700.225.0550

Designed for professional racing and performance tuning, these springs offer the highest degree of linearity and guaranteed consistency in the industry, making them the choice for teams seeking optimized handling dynamics.

Engineered for professional motorsport applications, the Eibach ERS (Eibach Race Spring) system offers the precision and consistency required to fine-tune your vehicle's handling dynamics. This linear-rate coilover spring provides maximum travel combined with the smallest possible block heights, ensuring your suspension performs predictably under extreme racing loads.

Constructed using high-tensile spring steel, these ultra-lightweight springs reduce unsprung mass to improve shock valving response and maintain tire contact with the track surface. Every ERS spring is individually tested to guarantee the highest linearity and rate accuracy for repeatable performance across every heat cycle. Whether you are optimizing a coilover shock setup or a pull-bar system, this spring delivers the reliability and customization needed for competitive racing.

• Length: 7.00 inches
• Inside Diameter: 2.25 inches
• Spring Rate: 500 lbs/in
• MPN: 0700.225.0500
• Linear rate design for predictable handling
• Individually tested for guaranteed consistency
• Maximum travel with minimal block height
• Lightweight construction for reduced unsprung mass

The Eibach ERS (Eibach Race Spring) series is engineered for precision performance in diverse racing applications. This coilover spring is designed to provide maximum travel with minimal block height, allowing for optimal suspension tuning without premature coil bind. Built to withstand the rigors of competitive driving, it is a critical component for fine-tuning the handling dynamics of race-spec shocks and pull-bar systems.

Each spring is manufactured using high-tensile steel to ensure highest linearity and guaranteed consistency across every heat cycle. The ultra-lightweight construction reduces unsprung mass, improving suspension response and grip. Every unit is individually tested to verify its performance characteristics before leaving the factory.

• Manufacturer Part Number: 0700.225.0450
• Length: 7.00 inches
• Inner Diameter: 2.25 inches
• Series: Eibach Race Spring (ERS)
• High-tensile steel construction for reduced weight and increased travel
• Individually tested for rate accuracy and linearity
• Optimized for small block heights and maximum travel

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications that demand precise handling and consistent performance. This 7.00-inch length coilover spring features a 2.25-inch inner diameter and a 400 lbs/in spring rate, offering a high-performance solution for fine-tuning suspension dynamics. Designed to provide maximum travel with the smallest possible block height, these springs minimize unsprung mass while maintaining exceptional linearity under load.

• Series: Eibach Race Springs (ERS)
• Length: 7.00 inches
• Inner Diameter (ID): 2.25 inches
• Spring Rate: 400 lbs/in
• Ultra-lightweight construction to reduce unsprung mass
• High linearity and guaranteed rate consistency
• Maximum travel with optimized block height
• Each spring is individually tested and rated
• Manufacturer Part Number: 0700.225.0400

The Eibach ERS (Eibach Race Springs) system is the world's most prolific racing spring program, engineered to provide professional-grade suspension tuning for competitive applications. This 7.00-inch coilover spring features a 2.25-inch inner diameter and a 350 lbs/in rate, optimized for maximum travel and a minimal block height to prevent coil bind during extreme compression.

• High-linearity design ensures consistent, predictable handling across the entire suspension stroke.
• Precision manufactured from ultra-lightweight materials to reduce unsprung mass and improve damper response.
• Individually tested and rated for guaranteed consistency between batches.
• Compact block height allows for increased travel and greater setup flexibility.

• Manufacturer Part Number: 0700.225.0350
• Length: 7.00 in
• Inner Diameter: 2.25 in
• Spring Rate: 350 lbs/in
• Series: ERS (Eibach Race Springs)