Eibach ERS (Eibach Race Springs) are engineered to provide precision handling and performance across a wide range of racing and off-road applications. This 14.00-inch coilover spring features a 3.00-inch inside diameter, specifically designed to maximize travel while maintaining the smallest possible block height. Every ERS spring is individually tested to ensure the highest linearity and guaranteed rate consistency for fine-tuning shocks and pull-bars.

• Manufacturer Part Number: 1400.300.0450S
• Inside Diameter: 3.00 in
• Spring Length: 14.00 in
• Series: Eibach Race Springs (ERS)
• Individually tested for accuracy and consistency
• Optimized for maximum travel with minimal block height
• Legendary durability for off-road and racing environments

The Eibach ERS (Eibach Race Spring) system is a comprehensive series of precision-engineered springs designed for high-performance racing applications. This 14.00-inch length coil-over spring features a 3.00-inch inside diameter and is manufactured to provide maximum travel while maintaining the smallest possible block height. This design ensures that your suspension maintains its range of motion during aggressive cornering or high-impact off-road maneuvers.

Eibach ERS springs are utilized in everything from pavement-shaking race cars to rugged off-road vehicles. Each component is individually tested to ensure highest linearity and guaranteed consistency across the entire spring stroke. This precision allows for exact chassis tuning when adjusting corner weights, shocks, or pull-bar configurations.

• Inside Diameter (ID): 3.00 inches
• Free Length: 14.00 inches
• Series: Eibach Race Springs (ERS)
• Manufacturer Part Number: 1400.300.0400S
• Individually tested and rated for maximum consistency
• Optimized for small block height and maximum travel
• Race-proven durability for off-road and track use

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance off-road applications where precision suspension tuning is critical. This 14.00-inch coil-over spring features a 3.00-inch inside diameter, designed to provide maximum suspension travel while maintaining the smallest possible block height for improved clearance. Each spring is individually tested to ensure the highest linearity and guaranteed consistency, allowing for predictable handling dynamics from the track to the trail.

• Manufacturer Part Number: 1400.300.0350S
• Length: 14.00 inches
• Inside Diameter: 3.00 inches
• Engineered for maximum travel with minimal block height
• Legendary Eibach durability for off-road and race conditions
• Individually tested to guarantee rate accuracy and linearity
• Compatible with a wide range of racing shocks and pull-bar applications

Optimize your suspension tuning with the Eibach ERS (Eibach Race Spring) 1400.300.0300S. Built for professional racing and off-road applications, these precision-engineered springs allow for unparalleled customization of handling dynamics. Whether you are configuring a coilover shock or a pull-bar setup, Eibach ERS springs deliver the consistency required for competitive performance.

This specific coilover spring is designed for maximum travel while maintaining the smallest possible block height, reducing the risk of coil bind under heavy load. Every Eibach spring is individually tested and manufactured to exacting tolerances to ensure high linearity and guaranteed performance from one race to the next.

• Length: 14.00 inches
• Inside Diameter: 3.00 inches
• Spring Rate: 300 lbs/in
• Material: High-tensile spring steel
• Durability: Legendary Eibach off-road durability and corrosion resistance
• Part Number: 1400.300.0300S

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance off-road applications. This 14.00-inch coilover spring provides the precision tuning required to optimize vehicle handling dynamics, suspension response, and weight transfer.

Manufactured to exacting tolerances, Eibach race springs are designed to provide maximum travel while maintaining the smallest possible block heights to prevent coil bind. Each spring undergoes individual testing to ensure the highest linearity and guaranteed consistency, providing predictable performance under extreme loads.

• Length: 14.00 inches
• Inside Diameter: 3.00 inches
• Spring Rate: 275 lbs/in
• Series: Eibach Race Spring (ERS)
• MPN: 1400.300.0275S

Built with legendary Eibach durability, these springs are suitable for various applications from shocks to pull-bars, ensuring your race car remains composed on both smooth tracks and rugged off-road terrain.

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications where precision handling is critical. This 14.00-inch coilover spring features a 3.00-inch inside diameter and a 250 lbs/in spring rate, designed to deliver maximum travel while maintaining the smallest possible block height to prevent coil bind.

Built for durability in demanding off-road and circuit environments, these springs allow racers to fine-tune suspension dynamics across various applications, including shocks and pull-bars. Each spring is individually tested to ensure the highest linearity and guaranteed consistency, meeting the strict tolerances required for competitive performance.

• Series: Eibach Race Springs (ERS)
• Manufacturer Part Number: 1400.300.0250S
• Length: 14.00 inches
• Inside Diameter: 3.00 inches
• Spring Rate: 250 lbs/in
• Features: Maximum travel with minimal block height, individually tested for consistency, and high-tensile steel construction.

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and off-road applications that demand precise handling and predictable performance. This 3.00" inside diameter linear main spring is designed to deliver maximum travel while maintaining the smallest possible block heights, allowing for optimized suspension geometry and fine-tuning of vehicle dynamics.

Constructed with Eibach’s legendary durability, each spring is individually tested to ensure the highest level of linearity and guaranteed rate consistency. Whether used on shocks or pull-bars, these springs provide the reliability required for high-performance environments.

• Inside Diameter: 3.00"
• Spring Type: Linear Main Spring
• Series: Eibach Race Spring (ERS)
• Manufacturer Part Number: 1400.300.0200S
• Individually tested for rate accuracy and consistency
• Optimized for maximum travel with minimal block height
• Designed for racing and heavy-duty off-road use

The Eibach ERS (Eibach Race System) 1400.300.0150S is a precision-engineered coil-over spring designed for professional racing and high-performance off-road applications. Built to deliver unparalleled customization, this spring allows for fine-tuning handling dynamics across various suspension setups, from shocks to pull-bars.

This spring is engineered for maximum travel in combination with the smallest possible block heights, preventing premature binding during extreme compression. Every Eibach race spring is individually tested to ensure highest linearity and guaranteed consistency, providing predictable suspension behavior on every lap or trail.

• Length: 14.00 in
• Inside Diameter: 3.00 in
• Spring Rate: 150 lbs/in
• Series: Eibach Race System (ERS)
• Material: High-tensile spring steel
• Manufacturer Part Number: 1400.300.0150S
• Individually tested for rate accuracy and linearity
• Optimized for maximum travel and durability

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing applications, providing the precision and consistency required to fine-tune vehicle handling. This 14.00-inch length spring features a 2.50-inch inside diameter, designed to fit a wide variety of race shocks and pull-bars. By utilizing high-tensile spring steel, Eibach achieves maximum travel while maintaining the smallest possible block heights to prevent coil bind during aggressive suspension cycling.

Each spring is individually tested to ensure the highest linearity and guaranteed consistency across the entire range of travel. Whether you are optimizing a circuit racer or a long-travel off-road chassis, these springs offer the legendary durability Eibach is known for in extreme environments.

• Part Number: 1400.250.0700S
• Length: 14.00 inches
• Inside Diameter: 2.50 inches
• Material: High-tensile strength spring steel
• Individually tested for rate accuracy and linearity
• Optimized for maximum travel with minimal block height
• Compatible with standard 2.50" ID coilover shock bodies and pull-bars

The Eibach ERS (Eibach Racing Springs) system is a premier choice for professional racing and high-performance off-road applications. This 14.00-inch length coilover spring features a 2.50-inch inside diameter, specifically engineered to provide maximum suspension travel while maintaining the smallest possible block height. This design ensures your suspension can cycle fully without premature binding.

Constructed with the legendary durability Eibach is known for, each spring is individually tested to guarantee rate consistency and the highest linearity in the industry. Whether you are fine-tuning a track setup or an off-road racing rig, these springs offer the precision required for predictable handling dynamics.

• Part Number: 1400.250.0650S
• Length: 14.00 inches
• Inside Diameter: 2.50 inches
• Maximum travel in combination with smallest block heights
• Highest linearity and guaranteed consistency
• Individually tested to ensure performance standards
• Engineered for race and off-road durability

Eibach ERS (Eibach Race Spring) coil-over springs are precision-engineered for professional racing and high-performance suspension tuning. Designed with a 14.00-inch length and 2.50-inch inside diameter, these springs allow for maximum suspension travel while maintaining the lowest possible block heights to prevent coil bind. Every ERS spring is individually tested and manufactured with the highest linearity and consistency, ensuring predictable handling dynamics across a wide range of racing applications, from off-road to track use.

• Inside Diameter: 2.50 in
• Length: 14.00 in
• Maximum travel in combination with small block heights
• Legendary Eibach durability and off-road performance
• High linearity and guaranteed rate consistency
• Individually tested for quality assurance
• Manufacturer Part Number: 1400.250.0600S

The Eibach ERS (Eibach Race Spring) system is engineered for competitive racing, providing the precision and customization required to optimize suspension geometry and handling. This 14.00-inch coil-over spring features a 2.50-inch inside diameter, designed to offer maximum travel in combination with the smallest possible block height. Whether you are tuning shocks or pull-bars, these springs provide the consistent linearity needed for predictable chassis behavior.

• Precision Engineering: Individually tested to ensure guaranteed consistency and the highest linearity across the spring's stroke.
• Maximum Travel: Designed for high-stress racing applications, offering superior travel-to-block-height ratios.
• Durability: Built with legendary Eibach off-road and track durability to withstand extreme loads without sagging.
• Fine-Tune Performance: Part of a comprehensive system used by race teams worldwide to dial in corner weights and suspension response.

• Manufacturer Part Number: 1400.250.0500S
• Inside Diameter: 2.50 in.
• Length: 14.00 in.
• Series: Eibach Race Springs (ERS)

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance off-road applications where precision suspension tuning is critical. This 14.00-inch length coil-over spring features a 2.50-inch inside diameter, designed to provide maximum travel while maintaining the smallest possible block height to help prevent coil bind during extreme articulation.

Each ERS spring is individually tested to ensure highest linearity and guaranteed consistency, providing predictable handling dynamics for shocks or pull-bar applications. Built with high-tensile spring steel, these components offer the durability required for demanding off-road environments while allowing for precise customization of your vehicle's spring rates.

• Series: Eibach ERS (Eibach Race Spring)
• Length: 14.00 in (355.6 mm)
• Inside Diameter: 2.50 in (63.5 mm)
• High linearity and guaranteed rate consistency
• Individually tested to ensure precise performance tolerances
• Engineered for maximum travel and minimal block height
• Manufacturer Part Number: 1400.250.0450S

Engineered for professional racing and high-performance tuning, the Eibach ERS (Eibach Race Spring) system offers precision-optimized handling for a wide spectrum of applications, from shocks to pull-bars. This 14.00-inch length spring is designed with a 2.50-inch inside diameter, providing maximum suspension travel in combination with the industry's smallest block heights to prevent premature coil bind.

Constructed with legendary durability for both off-road and track environments, these springs offer the highest linearity and guaranteed consistency. Every individual spring is tested to ensure it meets strict tolerances, allowing for precise chassis setup and predictable performance under extreme racing loads.

• Part Number: 1400.250.0400S
• Inside Diameter: 2.50 in
• Length: 14.00 in
• Series: ERS (Eibach Race Springs)
• Testing: Individually tested for rate accuracy and consistency
• Build: High-travel design with minimal block height
• Applications: Race-tuned shocks, pull-bars, and coil-over systems

The Eibach ERS (Eibach Race Spring) system is a comprehensive series of precision-engineered springs designed for unparalleled customization across professional racing applications. This 14.00-inch coil-over spring features a 2.50-inch inside diameter and is engineered to deliver maximum travel in combination with the smallest possible block heights. By maximizing stroke and minimizing weight, these springs allow for precise chassis fine-tuning.

Every ERS spring is manufactured to exacting tolerances and individually tested to guarantee the highest linearity and consistency. This ensures that the spring rate remains predictable through the entire suspension cycle, whether used on track-focused shocks or heavy-duty off-road setups. The high-tensile strength construction provides the durability required for grueling competition environments.

• Manufacturer Part Number: 1400.250.0350S
• Series: Eibach Race Spring (ERS)
• Length: 14.00 inches
• Inside Diameter: 2.50 inches
• Maximum travel design minimizes block height for increased usable stroke
• Individually tested to ensure guaranteed consistency and rate accuracy
• High-linearity performance for predictable handling dynamics

The Eibach ERS (Eibach Race Spring) system is a premier choice for motorsport professionals and performance enthusiasts seeking precision suspension tuning. This 14.00-inch coil-over spring is engineered with a 2.50-inch inside diameter to deliver maximum suspension travel while maintaining a compact block height. This design prevents coil bind and allows for a wider range of tuning options for both track and off-road applications.

Constructed for legendary durability and consistent performance, each ERS spring is individually tested to ensure the highest level of linearity. This precision guarantees predictable handling dynamics under extreme loads. Whether you are fine-tuning a pull-bar setup or a complete coilover conversion, these springs provide the reliability required for competitive racing.

• Manufacturer Part Number: 1400.250.0300S
• Inside Diameter: 2.50 in
• Free Length: 14.00 in
• Engineered for maximum travel with minimal block height
• Individually tested for rate accuracy and consistency
• High-linearity design for predictable handling

The Eibach ERS (Eibach Race Spring) system is engineered for professional racing and high-performance off-road applications where precision handling and suspension consistency are critical. This 14.00-inch length spring features a 2.50-inch inside diameter, designed to provide maximum travel while maintaining the smallest possible block height. By utilizing high-tensile spring steel and rigorous manufacturing tolerances, Eibach ensures each spring delivers the highest linearity across its entire compression range.

• Series: Eibach Race Springs (ERS)
• Inside Diameter: 2.50 in
• Length: 14.00 in
• Manufacturer Part Number: 1400.250.0250S
• Engineered for maximum travel and durability in racing environments
• Individually tested to guarantee rate consistency and performance
• High linearity for predictable handling on shocks and pull-bars

The Eibach ERS (Eibach Race Spring) system is a highly modular spring system designed for the rigorous demands of motorsport. This 14.00-inch coilover spring is engineered to provide maximum travel while maintaining the smallest possible block height, allowing for precision tuning of handling dynamics on racing shocks and pull-bars.

Constructed for consistency and durability, every ERS spring is individually tested to guarantee rate linearity. The ultra-lightweight design helps reduce unsprung mass, improving suspension response and overall vehicle performance. Whether you are optimizing a circuit racer or a dirt track car, the 1400.250.0250 spring provides the predictable performance professional builders require.

• Part Number: 1400.250.0250
• Length: 14.00 in (355.6 mm)
• Inner Diameter: 2.50 in (63.5 mm)
• Spring Rate: 250 lbs/in
• Series: Eibach Race Springs (ERS)
• Features: High linearity, guaranteed consistency, and ultra-lightweight construction

The Eibach ERS 1400.250.0200S is a precision-engineered race spring designed for professional suspension tuning and high-performance applications. With a 14.00-inch free length and a 2.50-inch inside diameter, this Eibach Race Spring (ERS) provides maximum suspension travel while maintaining a minimal block height to prevent coil bind during aggressive cycling.

Each spring is individually tested to ensure the highest linearity and guaranteed rate consistency, whether used on coil-over shocks or pull-bar systems. Built with legendary durability, these springs are engineered to maintain their performance under the extreme loads found in off-road and track environments.

• Manufacturer Part Number: 1400.250.0200S
• Inside Diameter: 2.50 in
• Free Length: 14.00 in
• Spring Rate: 200 lb/in
• Design: Maximum travel with smallest block heights
• Testing: Individually tested for linearity and accuracy
• Application: Compatible with 2.50" ID coil-over systems

The Eibach ERS (Eibach Race Springs) system is engineered for professional racing applications where precision and consistency are mandatory. This 14.00-inch coilover spring features a 2.50-inch inside diameter, designed to provide maximum travel while maintaining the smallest possible block height to prevent suspension binding during high-load maneuvers.

• Precision Engineering: Delivers high linearity and guaranteed consistency for predictable handling dynamics across track and off-road disciplines.
• Individually Tested: Each spring is individually tested and rated to ensure it meets strict Eibach manufacturing tolerances and performance standards.
• Versatile Application: Ideal for use on shocks, pull-bars, and other suspension components requiring a standard 2.50" ID spring.
• Race-Proven Durability: Built with legendary Eibach durability to withstand the extreme cycles of competitive racing environments.

• Length: 14.00 in
• Inside Diameter: 2.50 in
• Spring Rate: 175 lbs/in
• Manufacturer Part Number: 1400.250.0175S

The Eibach ERS (Eibach Race Spring) system is a comprehensive suspension solution designed for unparalleled customization and performance across a wide spectrum of racing applications. This 14.00-inch coil-over spring with a 2.50-inch inside diameter is engineered to provide maximum travel while achieving the smallest possible block heights.

Whether you are fine-tuning shocks or pull-bars, Eibach race springs deliver the linearity and guaranteed consistency required for competitive handling. Each spring is individually tested to ensure it meets strict performance tolerances and legendary Eibach durability.

• Series: Eibach Race Springs (ERS)
• Length: 14.00 in.
• Inside Diameter: 2.50 in.
• Manufacturer Part Number: 1400.250.0150S
• High linearity and predictable response under load
• Individually tested for rate consistency
• Engineered for maximum travel and minimal block height

The Eibach ERS (Eibach Racing Spring) system is the industry standard for professional racing and high-performance suspension tuning. This 14.00-inch free-length coil-over spring features a 2.50-inch inside diameter, specifically engineered to provide maximum suspension travel while maintaining a minimal block height. This design prevents premature coil bind and allows for a wider range of tuning options on shocks, pull-bars, and coil-over conversion kits.

Manufactured from high-tensile strength spring steel, each ERS component is individually tested to ensure the highest linearity and rate consistency. Whether you are setting up an off-road trophy truck or a circuit-spec race car, these springs deliver the predictable handling dynamics required for competitive driving. The durable finish and precision engineering guarantee that spring rates remains consistent even under extreme thermal and physical loads.

• Inside Diameter: 2.50 in.
• Free Length: 14.00 in.
• Manufacturer Part Number: 1400.250.0100S
• Optimized block height for maximum travel
• Linear rate design for predictable chassis response
• Individually tested for guaranteed consistency

Eibach ERS (Eibach Race Springs) are engineered for professional racing applications, providing the precision and consistency required for fine-tuning vehicle handling dynamics. This ultra-lightweight coil-over spring is designed to minimize unsprung mass while achieving maximum travel in combination with the smallest possible block heights. Each spring undergoes individual testing to ensure it meets strict tolerances for linearity and performance.

• Inside Diameter: 60mm
• Length: 140mm
• Construction: High-tensile strength steel for weight reduction and durability
• Testing: Individually tested and rated to guarantee consistent performance across all racing conditions
• Application: Compatible with various shock and pull-bar setups requiring a 60mm ID spring
• Manufacturer Part Number: 140-60-0130

The ERS system allows for unparalleled customization, making it a staple for racers looking to optimize suspension geometry and response. From track-day setups to professional series, these springs provide the linear rate and reliability needed to maintain grip and stability.

The Eibach ERS (Eibach Race Spring) series is engineered for professional racing applications that demand precise suspension tuning. This 140mm length coil-over spring features a 60mm inside diameter, designed to offer maximum suspension travel in combination with the smallest possible block heights. By utilizing high-tensile materials, Eibach reduces unsprung mass to improve damper response and overall handling dynamics.

Built for consistency, every Eibach ERS spring is individually tested to ensure it meets strict linearity tolerances. These springs are suitable for a wide range of motorsport applications, from shock absorbers to pull-bars, providing the predictable performance required for competitive driving.

• Manufacturer Part Number: 140-60-0110
• Inside Diameter: 60mm
• Free Length: 140mm
• Highest linearity and guaranteed rate consistency
• Ultra-lightweight construction for reduced unsprung weight
• Engineered for maximum travel with minimal block height
• Each spring individually tested and rated

The Eibach ERS (Eibach Race Spring) system is engineered to provide the precision and consistency required for professional off-road racing. This 13.00-inch coilover spring is designed to optimize handling dynamics across various racing applications, from standard shock setups to pull-bars. Each spring is individually tested to ensure it meets strict linearity and rate tolerances, delivering predictable performance under extreme conditions.

• Engineered for maximum travel in combination with the smallest block heights to prevent premature bottoming out.
• Legendary Eibach off-road durability ensures consistent performance over the life of the spring.
• Highest linearity and guaranteed consistency for fine-tuning handling dynamics.
• Each spring is individually tested and rated.
• Internal Diameter (ID): 3.00 inches
• Length: 13.00 inches
• Spring Rate: 700 lbs/in
• Manufacturer Part Number: 1300.300.0700S

Eibach ERS (Eibach Race Springs) are engineered for the extreme demands of off-road racing, providing the precision and reliability needed to fine-tune your vehicle's handling dynamics. This 12.00-inch length coilover spring features a 3.00-inch inside diameter, designed to provide maximum suspension travel in combination with the smallest possible block heights.

Built with legendary Eibach durability, these silver springs offer highest linearity and guaranteed consistency. Each individual spring is tested to ensure it meets strict tolerances, making them the preferred choice for drivers seeking unparalleled customization and performance optimization in competitive racing environments.

• Length: 12.00 inches
• Inside Diameter (ID): 3.00 inches
• Finish: Silver Powdercoat
• Series: ERS Off-Road
• Manufacturer Part Number: 1200.300.0700S
• Individually tested for rate accuracy and consistency
• Engineered for maximum travel and minimal block height

Enhance your racing or off-road suspension setup with the Eibach ERS (Eibach Race Spring) system. This 12.00-inch length coil-over spring features a 3.00-inch inside diameter and a 650 lbs/in rate, designed specifically to provide maximum travel while maintaining a compact block height to prevent coil bind during extreme compression.

Manufactured to meet the demands of professional motorsports, Eibach ERS springs are recognized for their legendary durability and high linearity. Every spring is individually tested to ensure guaranteed consistency, providing predictable handling and performance for fine-tuning shocks and suspension dynamics.

• Part Number: 1200.300.0650S
• Length: 12.00 inches
• Inside Diameter: 3.00 inches
• Spring Rate: 650 lbs/in
• Series: ERS (Eibach Race Spring)
• Performance: Maximum travel with smallest block heights
• Quality: Individually tested for linearity and rate accuracy

Eibach ERS (Eibach Race Springs) are engineered for professional racing applications, providing precise customization for shocks, pull-bars, and suspension tuning. These 3.00-inch inside diameter coilover springs are designed to deliver maximum travel while maintaining the smallest possible block heights, ensuring your suspension operates through its full range without premature binding.

• Precision Engineering: Manufactured for high linearity and guaranteed consistency across the entire spring stroke.
• Durability: Built with legendary Eibach off-road durability to withstand extreme racing conditions.
• Quality Assurance: Each spring is individually tested and rated to ensure it meets strict performance tolerances.
• Specifications: 12.00-inch length and 3.00-inch inside diameter (ID).
• MPN: 1200.300.0600S

Eibach Silver Coilover Springs are precision-engineered for professional racing and demanding off-road applications. With a 3.00-inch inside diameter, these springs provide the customization necessary to optimize handling across a wide range of suspension setups, including shocks and pull-bars. Eibach focuses on high linearity and guaranteed consistency, ensuring that your vehicle's handling remains predictable under extreme loads.

Each spring is individually tested to verify it meets strict tolerances, providing the reliability required for competitive environments. The silver powder-coated finish offers durable protection against the elements, maintaining performance and appearance through rigorous use.

• Inside Diameter: 3.00 inches
• Finish: Silver powder coat
• Individually tested for rate accuracy and consistency
• High-linearity design for predictable suspension response
• Designed for racing and off-road durability
• Manufacturer Part Number: 1200.300.0550S

The Eibach ERS (Eibach Race Spring) system is engineered for professional motorsport and high-performance off-road applications where precision tuning is critical. This 12.00-inch length spring with a 3.00-inch inside diameter is designed to provide maximum travel while maintaining the smallest possible block height, ensuring your suspension operates within its optimal range without binding.

Every ERS spring is manufactured with high-tensile strength steel and individually tested to guarantee the highest linearity and rate consistency. Whether used on shocks or pull-bars, these springs offer the predictable handling dynamics required for competitive racing and extreme off-road environments.

• Series: Eibach ERS (Race Spring)
• Length: 12.00 inches
• Inside Diameter: 3.00 inches
• Travel: Maximum travel combined with minimal block height
• Consistency: Individually tested for rate accuracy and linearity
• Durability: Legendary Eibach off-road performance and finish
• MPN: 1200.300.0400S