Fits 1990-1997 Toyota Land Cruiser and Lexus LX450 (Base).

Old Man Emu (OME) Front Heavy Duty Coil Springs are engineered to manage the extreme loads associated with 4x4 remote area travel. When your vehicle is fully loaded with extra fuel, water, spares, and recovery gear, factory suspension often lacks the support needed for stability. These OME 2850 springs provide a lift while emphasizing ride control and durability. Designed and manufactured in Australia, these springs are best paired with OME shock absorbers for a fully integrated suspension system tuned specifically for your vehicle.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability.
• Double scragged to reduce internal spring stress and ensure a long service life without sagging.
• Formed on computer-precision mandrels to maintain consistent tolerances and spring rates.
• Finished in a heavy-duty, corrosion-resistant black powder coat.
• Engineered as a direct fit replacement to match exact vehicle specifications.
• Manufacturer Part Number: 2850

Fits 1997-2002 Honda CR-V EX, LX, and SE models.

Engineered for the specific demands of loaded vehicle travel, ARB Old Man Emu rear coil springs (2798) provide the support required when carrying additional fuel, water, and equipment. Unlike generic lift springs, OME focuses on integrated ride control, ensuring your CR-V remains stable and predictable even when fully loaded. These springs are designed to be paired with OME shock absorbers for a complete, tuned suspension system tailored to your vehicle's application.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability and fatigue resistance
• Double scragged process reduces internal spring stress and minimizes sagging over time
• Formed on computer-precision mandrels to ensure consistent spring rates and exact fitment
• Finished in a durable, hard-wearing black powder coat for superior corrosion protection
• Designed and manufactured in Australia to precise tolerances
• Part Number: 2798

Fits 1997-2002 Honda CR-V EX, LX, and SE.

Old Man Emu (OME) front coil springs are engineered to provide improved ride control and support for vehicles carrying additional loads or navigating rough terrain. Designed specifically for the first-generation Honda CR-V, these springs focus on handling precision and durability rather than just lift height. When paired with OME shock absorbers, they form a fully integrated suspension system tailored to the vehicle's weight and application.

• Manufactured from high-strength micro-alloyed spring steel for long-term durability
• Double scragged to reduce internal stress and prevent spring sag over time
• Formed on computer-precision mandrels to ensure consistent spring rates across every unit
• Finished in a hard-wearing black powder coat for superior corrosion resistance
• Designed and manufactured in Australia for demanding off-road conditions
• Manufacturer Part Number: 2797

Fits select 2002-2012 Jeep Liberty models (Sport, Limited, Renegade, Rocky Mountain Edition, 65th Anniversary, and Jet).

Old Man Emu front coil springs are engineered to improve ride control and handling when your Jeep is outfitted for off-road travel or carrying additional equipment. Unlike generic springs, these OME coils are designed for specific vehicle applications to ensure correct fitment and optimal performance. They provide a predictable ride height increase while focusing on damping control, especially when matched with OME Nitrocharger or Sport shock absorbers.

Manufactured in Australia from high-strength, micro-alloyed spring steel, these coils undergo a double-scragging process to reduce internal stress and prevent sagging over time. Each spring is formed on computer-precision mandrels for exact consistency across the set and finished in a durable black powder coat for long-term corrosion resistance.

• Manufacturer Part Number: 2790
• Constructed from micro-alloyed spring steel for maximum durability
• Double-scragged to ensure spring rate consistency and long service life
• Precision-formed on computer-controlled mandrels for exact tolerances
• Tough black powder coat finish protects against road debris and salt
• Designed for seamless integration with OME suspension systems

Fits 2008-2012 Jeep Liberty models (Jet, Limited, Renegade, and Sport). This Old Man Emu rear coil spring is engineered to handle the increased loads of 4x4 travel, ensuring your suspension maintains control even when the vehicle is fully equipped with gear, fuel, and supplies.

Old Man Emu (OME) uses specialized micro-alloyed spring steel and precision manufacturing to provide a significant improvement in ride height and handling. Each spring is double scragged to reduce stress and prevent sagging over time, while computer-controlled mandrel forming ensures consistent rate and performance across the production line.

• Manufactured from high-strength, micro-alloyed spring steel for maximum durability
• Double scragged to reduce internal stress and enhance spring life
• Precision-formed on computer mandrels for exact vehicle fitment
• Durable black powder coat finish for superior corrosion resistance
• Designed to integrate seamlessly with Old Man Emu shock absorbers
• Manufacturer Part Number: 2731
• Engineered and manufactured in Australia

Fits 2007-2021 Toyota Land Cruiser Base and Heritage Edition (200 Series).

Engineered to withstand the demands of remote 4x4 travel, the Old Man Emu rear coil spring (MPN 2723) provides the necessary support for fully loaded vehicles carrying fuel, water, and recovery gear. Unlike generic lift springs, OME designs focus on ride control and handling stability, ensuring your Land Cruiser remains composed under heavy loads. These springs are manufactured from high-strength micro-alloyed steel and are designed to integrate perfectly with OME shock absorbers for a complete suspension solution.

• Manufactured from high-strength micro-alloyed spring steel for long-term durability
• Double scragged process reduces spring stress and prevents height loss over time
• Formed on computer-precision mandrels to ensure exact tolerances and consistent performance
• Durable black powder coat finish provides superior corrosion resistance
• Designed and manufactured in Australia to meet rigorous off-road standards
• Part Number: 2723

Fits 2007-2021 Toyota Land Cruiser Base and Heritage Edition (200 Series).

Designed specifically for the demands of off-road travel and overlanding, this Old Man Emu rear coil spring (MPN 2722) addresses the strain placed on factory suspension when carrying heavy loads like fuel, water, and recovery gear. Rather than just increasing ride height, ARB engineers these springs with a focus on ride control and load-carrying capacity. Each spring is formed on computer-precision mandrels to ensure consistent performance across both coils.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double scragged before and after shot peening to reduce spring stress and prevent sagging
• Finished in a durable black powder coat for superior corrosion resistance
• Precision-engineered to exact specifications for guaranteed vehicle fitment
• Designed and manufactured in Australia
• Manufacturer Part Number: 2722

Fits 2007-2021 Toyota Land Cruiser (Base and Heritage Edition).

Preparing a 200 Series Land Cruiser for remote area travel requires suspension capable of handling the substantial weight of additional fuel, water, and recovery gear. ARB Old Man Emu (OME) rear coil springs are engineered to manage these heavy loads while significantly improving ride control and handling. These springs are designed to provide a reliable ride height increase without sacrificing the stability needed for off-road excursions.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double scragged to reduce internal spring stress and prevent sagging over time
• Formed on computer-precision mandrels to ensure consistent spring rates and fitment
• Finished in a durable, hard-wearing black powder coat for superior corrosion resistance
• Designed and manufactured in Australia for demanding 4x4 environments
• Manufacturer Part Number: 2721

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, X, and 70th/75th Anniversary editions.

Designed to handle the rigorous demands of remote 4x4 travel, these Old Man Emu front coil springs are engineered for vehicles carrying significant weight from aftermarket bumpers, winches, and recovery gear. These heavy-load springs focus on providing superior ride control and maintaining stability when your Jeep is fully loaded, rather than just increasing ride height. For the best performance and a fully integrated suspension system, pair these springs with OME Nitrocharger shock absorbers.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double scragged before and after shot peening to reduce internal stress and prevent sagging
• Precision-formed on computer-controlled mandrels to ensure consistent spring rates and fitment
• Finished in a durable black powder coat for long-term corrosion resistance
• Specifically tuned for heavy load applications on the Jeep JK platform
• Manufacturer Part Number: 2619
• Designed and manufactured in Australia

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited JK models.

When preparing for remote 4x4 travel, the added weight of fuel, water, and recovery gear places significant strain on factory suspension components. Old Man Emu (OME) rear coil springs are engineered to manage these heavy loads while providing a lift and, more importantly, a substantial improvement in ride control. These springs are manufactured from high-strength, micro-alloyed spring steel to ensure they maintain their height and performance even under demanding conditions.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double scragged to reduce internal spring stress and significantly enhance service life
• Formed on computer-precision mandrels to ensure perfect consistency and fitment
• Finished in a durable, hard-wearing black powder coat for superior corrosion resistance
• Designed as part of an integrated system to improve vehicle handling and stability
• Manufacturer Part Number: 2618
• Designed and manufactured in Australia

Fits 2007-2018 Jeep Wrangler and Wrangler JK (2-door and 4-door models).

Old Man Emu front coil springs are specifically engineered to manage the added weight of armor, bumpers, and recovery gear while improving vehicle handling and ride control. Unlike generic lift springs, these are designed to provide consistent performance under load, ensuring your suspension maintains proper travel and stability during off-road travel or remote area touring. This specific coil is rated for heavy-duty front loads on 2-door models and medium-duty front loads on 4-door models.

Each spring is formed on computer-precision mandrels and manufactured from high-strength, micro-alloyed spring steel for long-term durability. To further enhance service life, the coils are double scragged, a process that reduces internal stress and prevents the spring from sagging over time. A durable black powder coat finish provides excellent resistance against corrosion and the elements.

• Manufacturer Part Number: 2616
• Material: Micro-alloyed spring steel for maximum strength
• Construction: Formed on precision mandrels for exact tolerances
• Finish: Hard-wearing black powder coat
• Stress Relieved: Double scragged to reduce stress and enhance spring life
• Load Rating: Front Heavy (2-Door) / Front Medium (4-Door)
• Origin: Designed and manufactured in Australia

Fits 2007-2021 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

When equipping your 4WD for remote travel, the added weight of bull bars, winches, and auxiliary equipment places significant stress on factory suspension. These Old Man Emu front coil springs are specifically engineered for the 2007-2021 Toyota Tundra to manage these heavy loads while improving ride control and handling. Unlike generic lift springs, OME coils are designed with specific spring rates to maintain optimal suspension geometry and ride quality. Manufactured in Australia, these springs are double-scragged to reduce internal stress and prevent sagging, ensuring your Tundra maintains its height and performance even under constant load.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double-scragged and shot-peened to reduce spring stress and significantly extend service life
• Precision-formed on computer-controlled mandrels to ensure consistent spring rates and fitment
• Finished in a durable, corrosion-resistant black powder coat
• Engineered for an integrated fit with Old Man Emu shock absorbers
• Designed and manufactured in Australia for demanding off-road conditions
• Manufacturer Part Number: 2614

Fits 2007-2021 Toyota Tundra models, including Base, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

Designed to handle the rigorous demands of 4x4 remote travel, ARB Old Man Emu front coil springs provide the support necessary for vehicles carrying heavy loads of fuel, water, and equipment. While these springs provide an increase in ride height, the primary focus is on superior ride control and handling. Each spring is precision-engineered to match specific vehicle applications, ensuring a perfectly tuned suspension system when paired with Old Man Emu shock absorbers.

• Manufactured from high-strength, micro-alloyed spring steel for maximum durability
• Double scragged before and after shot peening to reduce spring stress and prevent sagging
• Precision-formed on computer-controlled mandrels for consistent performance and fitment
• Finished in a durable, corrosion-resistant black powder coat
• Designed and manufactured in Australia for demanding off-road conditions
• Manufacturer Part Number: 2613

Fits 2007-2021 Toyota Tundra models. These Old Man Emu front coil springs are engineered for the driver who demands improved ride control and height without adding a heavy front bull bar or bumper.

Designed and manufactured in Australia, these springs (MPN: 2612) are built from high-strength micro-alloyed spring steel. Each spring undergoes a double-scragging process to reduce internal stress and prevent sagging over time, ensuring a consistent ride height even under the demands of 4x4 travel. The coils are formed on computer-controlled mandrels for precise consistency and finished in a durable black powder coat to resist corrosion and road debris.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double-scragged to reduce spring stress and enhance service life
• Precision-formed on computer mandrels for exact tolerances
• Durable black powder coat finish for long-term corrosion resistance
• Specifically tuned for vehicles without heavy front-end accessories (No Bar)
• Designed and manufactured in Australia

Fitment Table:

Fits select 1987-2014 Nissan Pathfinder and 2004 Nissan Pathfinder Armada models. Designed to handle the increased weight of 4x4 remote travel, this Old Man Emu (OME) heavy-duty rear coil spring (MPN: 2610) is engineered to provide superior load-carrying capacity without sacrificing ride control.

When your vehicle is fully loaded with fuel, water, and recovery gear, factory suspension often struggles. These OME springs are manufactured using micro-alloyed spring steel for maximum durability and resistance to sagging. Every spring is double scragged under load to reduce internal stress and ensure a consistent ride height throughout the life of the component. The computer-precision mandrel forming ensures exact tolerances, while the durable black powder coat protects against corrosion in harsh off-road environments.

• Manufactured from high-strength micro-alloyed spring steel
• Double scragged to eliminate spring set and increase longevity
• Precision mandrel-formed for consistent performance and fitment
• Finished in a heavy-duty, corrosion-resistant black powder coat
• Engineered and manufactured in Australia for rigorous 4x4 applications
• Manufacturer Part Number: 2610

Fits select 1987-2014 Nissan Pathfinder and 2004 Nissan Pathfinder Armada models. This pair of Old Man Emu medium-load rear coil springs is engineered to handle the additional weight of 4x4 travel, including fuel, water, and recovery gear, without compromising ride quality.

Designed and manufactured in Australia, these springs focus on improving vehicle control and stability while providing a modest increase in ride height. For optimal performance, OME recommends pairing these springs with matching Old Man Emu nitrocharger shock absorbers to create a fully integrated suspension system tailored to your vehicle's load requirements.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double scragged process reduces internal spring stress and prevents sagging over time
• Formed on computer-precision mandrels to ensure consistent spring rates across the set
• Durable black powder coat finish provides superior corrosion resistance
• Precision engineered to exact specifications for a direct factory-replacement fit
• Manufacturer Part Number: 2609

Engineered for high-performance off-road suspension systems, the King Shocks 3.75" Inside Diameter (ID) Coil Spring provides the consistent rate and durability required for demanding racing and trail applications. This coil spring is designed to fit 3.0" or larger body coilovers that utilize a 3.75" ID spring seat.

• Manufacturer Part Number: SPR375-16-700
• Inside Diameter: 3.75 inches
• Free Length: 16 inches
• Spring Rate: 700 lbs/in
• Material: High-tensile chrome silicon steel

Whether you are tuning a long-travel suspension or replacing a worn component, these springs are manufactured to strict tolerances to ensure they maintain their free length and rate under extreme cycling and heat. The 700lb rate offers substantial support for heavier front-end weights or aggressive damping setups.

King Shocks 3.0" ID Coil Springs are engineered for the extreme demands of off-road racing and heavy-duty custom suspension setups. These precision-wound coils provide the consistent spring rate and durability required for long-travel coilovers, ensuring predictable rebound and compression performance in high-stress environments.

• Inside Diameter: 3.0 inches
• Length: 16 inches
• Spring Rate: 700 lbs/in
• Finish: King signature blue powder coat
• Manufacturer Part Number: SPR3-16-700

Manufactured from high-tensile spring steel, these 16-inch coils are heat-treated and shot-peened to resist sagging and maintain their free height over years of hard use. Whether you are tuning a race truck or a weekend crawler, these springs deliver the precise load-bearing capacity needed for optimized suspension geometry.

Fine-tune your vehicle's suspension performance with King Shocks 3.0" ID Coil Springs. These high-performance springs are engineered to provide consistent rebound and support, ensuring your suspension system maintains its ride height and handling characteristics under the most demanding off-road conditions.

• Inside Diameter: 3.0 inches
• Length: 16 inches
• Spring Rate: 300 lb/in
• Manufacturer Part Number: SPR3-16-300

Designed for use with 3.0" diameter shock bodies, these 16-inch coil springs offer the precision and durability required for professional racing and serious recreational use. Whether you are configuring a dual-rate setup or replacing worn-out coils, King Shocks provides the reliability needed for predictable suspension cycling and improved trail feedback.

Engineered for high-performance off-road racing and recreational suspension setups, King Shocks 3.0" Inside Diameter (ID) coil springs deliver the consistency and durability required for precise suspension tuning. These springs are designed to withstand the heavy cycling of off-road use without sagging, maintaining their free length and rate over time.

This 14-inch spring is manufactured from high-tensile spring steel and finished in the iconic King Blue powder coat for superior corrosion resistance. It is an ideal choice for drivers needing to fine-tune ride height or spring frequency on 3.0-inch body coilovers.

• Manufacturer Part Number: SPR3-14-700
• Inside Diameter (ID): 3.0 inches
• Free Length: 14 inches
• Spring Rate: 700 lbs/in
• Finish: King Blue powder coat
• Construction: High-tensile spring steel

Fine-tune your suspension performance with the King Shocks 3.0" ID Coilover Spring. Engineered to meet the rigorous demands of off-road racing and heavy-duty trail use, these springs provide the consistent rate and durability required for high-travel suspension systems. At 14 inches in length with a 650 lb/in spring rate, this component is ideal for balancing vehicle loads and achieving precise ride height on 3.0-inch diameter coilover shocks.

• Inside Diameter: 3.0 inches
• Free Length: 14 inches
• Spring Rate: 650 lbs/in
• Material: High-tensile chrome silicon steel
• MPN: SPR3-14-650
• Shot-peened and heat-treated to prevent sagging and ensure long-term cycle life.
• Finished in signature King Shocks blue powder coat for maximum corrosion resistance.

This King Shocks 3.0" ID Coil Spring is engineered to provide consistent performance and precise ride height control for high-performance suspension systems. Manufactured from high-tensile spring steel, these springs are designed to withstand heavy cycling and aggressive off-road terrain without sagging or losing their rate.

Ideal for fine-tuning coilover setups, this 14-inch spring features a 600 lb/in rate to deliver the support and bottoming resistance required for demanding applications. Its 3.0-inch inner diameter ensures a proper fit on compatible shock bodies and spring seats.

• Inner Diameter: 3.0 inches
• Free Length: 14 inches
• Spring Rate: 600 lb/in
• Construction: High-tensile spring steel
• Finish: Durable blue powder coat
• Manufacturer Part Number: SPR3-14-600

King Shocks 3.0 ID coil springs are engineered for high-performance off-road suspension systems, providing the reliability and precision required for custom tuning. These springs are designed specifically to fit shocks with a 3.0-inch inside diameter, offering consistent rate performance under extreme conditions.

Manufactured from high-tensile spring steel, these coils are built to resist sagging and maintain their free length over years of use. They are an essential component for dialing in vehicle ride height and suspension frequency, whether you are configuring a single-spring setup or a complex dual-rate system.

• Inside Diameter: 3.0 inches
• Free Length: 14 inches
• Spring Rate: 550 lbs/in
• Material: High-tensile spring steel
• Manufacturer Part Number: SPR3-14-550

Tune your off-road suspension with precision using King Shocks 3.0" ID coilover springs. These high-performance springs are engineered to provide consistent rates and withstand the extreme cycles of desert racing and technical trail use. Each spring is manufactured from high-tensile spring steel, then shot-peened and heat-treated to prevent sagging and ensure long-term durability under heavy loads.

Designed for custom coilover applications, these 14-inch springs allow for fine-tuning your vehicle's ride height and compression characteristics. The 350 lb/in rate is ideal for specific sprung-weight requirements in dual-rate or single-rate configurations. The blue powder-coat finish provides superior corrosion resistance while maintaining the iconic King Shocks aesthetic.

• Inner Diameter: 3.0 inches
• Free Length: 14 inches
• Spring Rate: 350 lb/in
• Construction: Shot-peened, heat-treated high-tensile spring steel
• Finish: Durable blue powder coating
• Part Number: SPR3-14-350

This King Shocks 3.0" ID coil spring is engineered for high-performance off-road suspension systems and custom coilover configurations. Designed to provide consistent support and predictable weight transfer, this 14-inch spring features a 300 lb/in rate, making it a versatile choice for various suspension tuning requirements.

• Inner Diameter: 3.0 inches
• Free Length: 14 inches
• Spring Rate: 300 lbs/in
• Finish: Signature King Blue powder coat
• MPN: SPR3-14-300

Whether used in a single-rate setup or as a primary/tender spring in a dual-rate stack, this coil spring is built to maintain its free length and rate under rigorous cycling. The 3.0" inner diameter is specifically sized for compatibility with performance racing shocks and 2.5" body coilovers.

Engineered for high-performance off-road suspension systems, this King Shocks 3.0" ID Coil Spring provides the precision and durability required for rigorous terrain. Designed to fit 3.0" diameter shock bodies, these springs are essential for fine-tuning ride height, handling characteristics, and corner balance.

• Inside Diameter (ID): 3.0 in
• Length: 14 in
• Spring Rate: 250 lb/in
• Manufacturer Part Number: SPR3-14-250

King Shocks coil springs are manufactured to strict tolerances, ensuring a consistent spring rate and long-term resistance to sagging, even under heavy cycling in racing or trail applications.

Engineered for the rigorous demands of off-road racing and high-performance suspension tuning, this King Shocks 3.0" ID Coil Spring provides the consistent rate and durability required for professional coilover applications. Manufactured from high-tensile chrome silicon steel, each spring is precision-wound to maintain exacting tolerances for height and load capacity.

Built to handle extreme cycling without sagging, these springs are heat-treated, shot-peened, and finished in a signature King Blue powder coat for maximum corrosion resistance and fatigue life. Whether you are dialing in a dual-rate setup or replacing a worn primary spring, this 14-inch coil delivers predictable handling on the trail or the race course.

• Inner Diameter: 3.0 inches
• Free Length: 14 inches
• Spring Rate: 200 lbs/in
• Material: High-tensile chrome silicon steel
• Finish: King Blue powder coating
• MPN: SPR3-14-200

Optimize your suspension performance with this King Shocks 3.0" ID high-performance coil spring. Engineered to meet the rigorous demands of off-road racing and heavy-duty trail use, these springs provide the consistent rate and durability required for custom coilover applications and long-travel suspension setups.

• Manufactured from high-tensile spring steel for maximum fatigue resistance and long-term durability.
• Precision wound to maintain strict tolerances for diameter and rate consistency.
• Designed specifically for use with 3.0" ID coilover hardware and shock bodies.

Technical Specifications:

• Inside Diameter (ID): 3.0 inches
• Free Length: 12 inches
• Spring Rate: 300 lbs/in
• Manufacturer Part Number: SPR3-12-300

Engineered for the rigors of off-road racing and performance tuning, this King Shocks 3.0" ID coil spring delivers the consistent rate and durability required for high-performance suspension systems. These springs are manufactured from high-tensile spring steel to ensure maximum travel without binding and maintain their free length over time, resisting the sagging common in lesser components.

• Internal Diameter (ID): 3.0 inches
• Free Length: 12 inches
• Spring Rate: 250 lb/in
• Material: High-tensile spring steel
• Finish: Durable King blue powder coat for corrosion resistance
• Part Number: SPR3-12-250

Designed to fit 3.0-inch diameter shock bodies, these springs are ideal for fine-tuning dual-rate coilover setups or primary spring applications on race-oriented vehicles. Sold individually.

This King Shocks 3.0" ID Coil Spring is engineered to meet the rigorous demands of off-road racing and high-performance suspension tuning. With a 12-inch free length and a 200 lb/in spring rate, this coil provides the consistent load-bearing capacity required for custom coilover setups. It is manufactured to strict tolerances to ensure the spring rate remains stable throughout its travel, preventing premature sagging or performance degradation during extreme use.

• Inner Diameter: 3.0 inches
• Free Length: 12 inches
• Spring Rate: 200 lb/in
• Designed for high-performance off-road coilovers
• Manufacturer Part Number: SPR3-12-200