Fits 1996-2009 Toyota 4Runner Base, Limited, Sport, and SR5 models.

Old Man Emu (OME) rear coil springs are engineered to handle the increased weight of 4x4 gear, fuel, and water while maintaining superior ride control. Part of an integrated suspension system, the OME 2906 is designed to improve both ride height and handling, especially when matched with corresponding OME shock absorbers.

Each spring is manufactured from high-quality micro-alloyed spring steel for maximum durability and resistance to sagging. To ensure longevity, these coils undergo a double-scragging process under load to reduce internal stress and are formed on computer-precision mandrels for consistent spring rates across the production run.

• Manufacturer Part Number: 2906
• Material: Micro-alloyed spring steel for strength and durability
• Finish: Hard-wearing black powder coat for corrosion resistance
• Process: Double scragged to enhance spring life and reduce settling
• Precision: Computer-formed on mandrels for exact vehicle fitment
• Origin: Designed and manufactured in Australia

Fits 1990-1995 Toyota 4Runner SR5 models.

Old Man Emu (OME) Heavy Duty rear coil springs are engineered to handle the increased weight associated with remote travel, including additional fuel, water, and recovery gear. These springs are specifically designed to improve ride control and load-carrying capacity, providing a lifted stance while maintaining optimal handling when paired with OME shocks. Each spring is manufactured to exact tolerances to ensure consistent performance and vehicle fitment.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double scragged before and after shot peening to reduce internal stress and prevent spring sag over time
• Formed on computer-controlled precision mandrels to ensure consistent spring rates and geometry
• Finished in a durable black powder coat for superior corrosion and abrasion resistance
• Designed and manufactured in Australia to meet rigorous off-road standards
• Manufacturer Part Number: 2901

Fits 1990-1995 Toyota 4Runner SR5.

Designed specifically for the demands of remote travel and heavy cargo, these ARB Old Man Emu (OME) rear coil springs provide the support needed when your 4WD is fully loaded with fuel, water, and gear. While these springs achieve a ride height increase, the engineering emphasis is placed on superior ride control and handling. To achieve a fully integrated suspension system, these springs are designed to be matched with Old Man Emu shock absorbers, ensuring your 4Runner maintains stability and comfort across varied terrain.

• Manufactured from high-strength, micro-alloyed spring steel for long-term durability
• Double scragged to reduce internal spring stress and minimize the risk of sagging over time
• Precision-formed on computer-controlled mandrels to ensure consistent rates and exact fitment
• Finished in a heavy-duty black powder coat for maximum corrosion resistance
• Engineered to exact specifications for a direct replacement of factory rear coils
• Manufacturer Part Number: 2900

Fits 2010-2024 Toyota 4Runner (SR5, Limited, Trail, TRD Off-Road, TRD Pro, Venture, and Sport).

Engineered for the demands of remote 4x4 travel, ARB Old Man Emu (OME) rear coil springs are designed to support the additional weight of fuel, water, and recovery gear without sacrificing ride control. These springs address the strain placed on factory suspension during heavy loading, providing both a ride height increase and improved handling characteristics for off-road environments. Each spring is specifically tuned to work as part of an integrated suspension system, ensuring your vehicle remains stable and predictable under load.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability
• Double scragged to reduce internal stress and prevent spring sag over time
• Formed on computer-precision mandrels for consistent spring rates and guaranteed fitment
• Durable black powder coat finish for superior corrosion resistance in harsh environments
• Specifically tuned for 4WD applications to improve stability and load-carrying capacity
• Designed and manufactured in Australia
• Manufacturer Part Number: 2899

Fits 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser.

Designed to handle the heavy loads of remote 4x4 travel, the Old Man Emu (OME) rear coil springs provide essential support for vehicles carrying extra fuel, water, and recovery gear. Unlike generic lift springs, OME engineers these coils specifically to improve ride control and stability while maintaining the desired ride height. Each spring is manufactured from high-strength, micro-alloyed spring steel and undergoes a double-scragging process to minimize sagging and ensure a long service life under heavy stress.

For optimal performance, these coils are best paired with OME shock absorbers to create a fully integrated suspension system tailored to your vehicle's specific application and weight requirements.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double-scragged before and after shot peening to reduce internal stress and prevent spring sag
• Formed on computer-precision mandrels for consistent spring rates across every coil
• Durable black powder coat finish provides superior corrosion resistance
• Australian designed and manufactured for harsh off-road environments
• Manufacturer Part Number: 2898

Fits select 2003-2024 Toyota 4Runner models including SR5, TRD Pro, and Limited.

When traversing remote terrain or carrying heavy payloads of fuel, water, and gear, your vehicle's factory suspension often struggles under the strain. Old Man Emu (OME) designs these rear coil springs as part of a fully integrated 4WD suspension system. Unlike generic springs, the OME 2897 is engineered to provide superior ride control and handling while maintaining proper ride height under load.

Manufactured in Australia, these springs are built from high-strength micro-alloyed spring steel. Each coil is formed on computer-precision mandrels to ensure consistent spring rates and performance. To prevent sagging and ensure a long service life, the springs are double-scragged to reduce internal stress before being finished in a durable black powder coat for maximum corrosion resistance.

• Manufactured from micro-alloyed spring steel for high strength and durability
• Double-scragged process reduces internal stress and prevents spring sag
• Precision-formed on computer-controlled mandrels for consistent tolerances
• Durable black powder coat finish protects against corrosion and debris
• Designed and manufactured in Australia
• Manufacturer Part Number: 2897

Fits select 2003-2015 Toyota 4Runner and 2007-2014 FJ Cruiser.

Engineered for the rigorous demands of remote off-road travel, the ARB Old Man Emu Rear Coil Spring (2896) is designed to handle the increased weight of recovery gear, fuel, and water. While these springs provide an increase in ride height, the primary focus is on superior ride control and load-carrying capacity, ensuring your 4WD remains stable and predictable even when fully loaded. Each spring is precision-tuned to integrate seamlessly with OME shock absorbers for a complete suspension solution.

• Manufactured from high-strength micro-alloyed spring steel for long-term durability
• Double scragged to reduce internal stress and prevent spring sag over time
• Formed on computer-precision mandrels to ensure exact tolerances and consistency
• Finished in a durable, hard-wearing black powder coat for maximum corrosion protection
• Designed and manufactured in Australia for heavy-duty 4x4 applications
• Manufacturer Part Number: 2896

Fits 2007-2014 Toyota FJ Cruiser models, including Base, Trail Teams Special Edition, and TRD Special Edition.

Old Man Emu (OME) designs these rear coil springs to address the unique demands of 4x4 travel, where heavy loads of fuel, water, and gear place significant strain on factory suspension. These springs are engineered not just for a lift in ride height, but for substantial improvements in ride control and handling under load. Each coil is manufactured to precise tolerances, ensuring your vehicle remains stable and predictable on and off the trail.

• Manufactured from high-strength, micro-alloyed spring steel for long-term durability
• Double scragged before and after shot peening to reduce spring stress and prevent sagging
• Formed on computer-precision mandrels to ensure consistent spring rates and perfect fitment
• Finished in a hard-wearing, corrosion-resistant black powder coat
• Designed and manufactured in Australia specifically for the FJ Cruiser chassis
• Manufacturer Part Number: 2895E

Fits select 2003-2024 Toyota 4Runner and 2007-2014 Toyota FJ Cruiser models.

Prepare your vehicle for the rigors of overland travel with Old Man Emu (OME) rear coil springs. Designed to manage the additional weight of fuel, water, spares, and recovery gear, these springs are engineered to support fully loaded 4WDs without compromising safety or handling. While these springs provide a ride height increase, the engineering focus is on improving ride control and stability. For the best performance, these springs should be matched with a corresponding set of OME shock absorbers for a fully integrated suspension system.

Each spring is manufactured in Australia using high-strength, micro-alloyed spring steel. To ensure long-term durability and performance consistency, every coil is double scragged to reduce internal stress and computer-formed on precision mandrels for an exact, repeatable fit.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double scragged process reduces spring stress and prevents sagging over time
• Computer-precision mandrel forming ensures consistent spring rates and exact vehicle fitment
• Durable black powder coat finish provides long-lasting corrosion resistance
• Designed and manufactured in Australia for demanding off-road environments
• Manufacturer Part Number: 2895

Fits 1996-2009 Toyota 4Runner (Base, Limited, Sport, and SR5).

Engineered for the demands of off-road travel and heavy utility, these ARB Old Man Emu (OME) rear coil springs are designed to support the additional weight of fuel, water, and equipment without compromising ride control. Each spring is manufactured using micro-alloyed spring steel and formed on computer-precision mandrels to ensure consistency and exact vehicle fitment. By utilizing a double-scragged process, OME reduces internal spring stress to enhance service life and maintain ride height under load.

• Manufactured from high-strength micro-alloyed spring steel
• Double scragged to minimize spring stress and prevent sagging
• Formed on computer-precision mandrels for consistent spring rates
• Finished in a durable, corrosion-resistant black powder coat
• Designed and manufactured in Australia for 4x4 applications
• Manufacturer Part Number: 2891

Fits 1996-2009 Toyota 4Runner (Base, SR5, Limited, and Sport). This Old Man Emu rear coil spring is engineered to handle the increased loads associated with remote travel and off-road equipment. Rather than a one-size-fits-all approach, OME designs vehicle-specific springs that prioritize ride control and load-carrying capacity over simple lift height.

Constructed from high-strength micro-alloyed spring steel, these coils undergo a double-scragging process to minimize settling and reduce internal stress. Each spring is formed on computer-precision mandrels to ensure consistent spring rates across the manufacturing run and is finished in a durable black powder coat for long-term corrosion resistance.

• Manufactured from micro-alloyed spring steel for maximum durability
• Double-scragged to reduce spring stress and prevent sagging
• Precision-formed on computer mandrels for exact fitment and consistency
• Hard-wearing black powder coat finish protects against the elements
• Designed and manufactured in Australia for rigorous off-road conditions
• Manufacturer Part Number: 2890

Fits select 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser.

Equipping your vehicle for remote travel often involves significant weight from fuel, water, and recovery gear. ARB Old Man Emu (OME) rear coil springs are engineered to manage these heavy loads while providing superior ride control and increased ride height. These springs are specifically tuned to integrate with OME shock absorbers, creating a cohesive suspension system that maintains stability and comfort across varied terrain.

Manufactured in Australia from high-strength micro-alloyed spring steel, these coils undergo a double-scragging process to minimize spring stress and prevent sagging over time. Each spring is formed on computer-controlled mandrels to ensure precise tolerances and finished with a durable black powder coat for long-term corrosion resistance.

• Manufacturer Part Number: 2889
• Material: Micro-alloyed spring steel for maximum durability
• Finish: Heavy-duty black powder coat
• Manufacturing: Computer-precision mandrel formed and double scragged
• Origin: Designed and manufactured in Australia
• Application: Rear suspension coil spring

Fits 2010-2024 Toyota 4Runner and 2016-2023 Toyota Tacoma models across various trims including SR5, TRD Off-Road, and TRD Pro.

Old Man Emu front coil springs are engineered to handle the increased weight of 4x4 accessories and remote travel gear while improving ride control. Manufactured from micro-alloyed spring steel, these coils provide superior strength and durability. Each spring is formed on computer-precision mandrels to ensure consistency and double scragged to reduce internal stress, significantly enhancing service life. These springs are designed to integrate seamlessly with OME shock absorbers for a complete, vehicle-specific suspension solution.

• Manufactured from micro-alloyed spring steel for maximum durability
• Double scragged to minimize spring stress and prevent sagging
• Precision formed on computer-controlled mandrels for exact fitment
• Finished in a durable, corrosion-resistant black powder coat
• Designed and manufactured in Australia
• Manufacturer Part Number: 2887

Fits select 2003-2009 Toyota 4Runner and 2005-2023 Toyota Tacoma models.

When equipping your 4WD for remote travel, the added weight of fuel, water, and recovery gear places significant stress on factory suspension. Old Man Emu Front Heavy Duty Coil Springs (Part Number: 2886) are engineered to manage these increased loads while providing improved ride height and superior vehicle control. These springs are manufactured from high-strength, micro-alloyed spring steel and finished with a durable black powder coat to withstand harsh off-road environments.

Each spring is formed on computer-precision mandrels to ensure consistent performance and undergoes a double-scragging process to reduce internal stress and prevent sagging over time. For optimal handling, these coils are designed to be paired with OME shock absorbers as part of a fully integrated suspension system.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double-scragged to reduce internal spring stress and enhance service life
• Formed on computer-precision mandrels for consistent quality
• Finished in a hard-wearing black powder coat for corrosion resistance
• Designed and manufactured in Australia
• Manufacturer Part Number: 2886

Fits select 2003-2024 Toyota 4Runner, 2005-2015 Tacoma, and 2007-2014 FJ Cruiser.

Old Man Emu (OME) front coil springs are engineered to handle the increased weight and strain of remote area travel. Designed to replace worn OE components or as part of a fully integrated suspension system, these 2885 springs focus on both ride height increases and significant ride control improvements. When paired with OME shock absorbers, these springs deliver a tuned suspension solution specifically matched to your vehicle's weight and application requirements.

• Manufacturer Part Number: 2885
• Material: Micro-alloyed spring steel for maximum strength and durability against sagging.
• Manufacturing: Formed on computer-precision mandrels to ensure consistent spring rates and performance.
• Stress Relief: Double scragged process reduces internal spring stress and enhances overall service life.
• Finish: Hard-wearing black powder coat for superior corrosion and abrasion resistance.
• Origin: Designed and manufactured in Australia.

Vehicle Fitment:

Fits select 2003-2024 Toyota 4Runner and FJ Cruiser, and 2016-2020 Chevrolet Colorado. This front coil spring is engineered to handle the demands of remote area travel where heavy loads of fuel, water, and equipment put excessive strain on factory suspension.

Part of the integrated Old Man Emu suspension system, the 2884 coil spring focuses on improving ride control and load-carrying capacity while providing a modest increase in ride height. Manufactured in Australia using high-strength micro-alloyed spring steel, these coils are double scragged to reduce internal stress and prevent sagging over time. For optimal handling performance, these springs should be paired with matching Old Man Emu nitrocharger shock absorbers.

• Manufactured from micro-alloyed spring steel for superior strength and durability
• Double scragged to minimize spring stress and extend service life
• Formed on computer-precision mandrels to ensure consistent spring rates and fitment
• Finished in a durable, hard-wearing black powder coat for corrosion resistance
• Designed and manufactured in Australia
• Manufacturer Part Number: 2884

Fits 2010-2015 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2016-2020 Chevrolet Colorado.

Old Man Emu front coil springs are engineered to provide the support and ride control necessary for 4x4 vehicles carrying heavy loads. Whether you are outfitted with additional fuel tanks, water, or recovery gear, these springs are designed to handle the strain while improving overall vehicle handling. For maximum performance, these springs should be paired with a corresponding set of Old Man Emu shock absorbers for a fully integrated suspension system.

• Manufactured from high-strength, micro-alloyed spring steel for long-term durability
• Double scragged to reduce internal spring stress and prevent sagging over time
• Formed on computer-precision mandrels to ensure consistent spring rates and fitment
• Finished in a durable, hard-wearing black powder coat for superior corrosion resistance
• Designed and manufactured in Australia to exact specifications
• Manufacturer Part Number: 2883

Fits Toyota Prado models through 2003.

When preparing for remote off-road travel, the added weight of fuel, water, and recovery gear places significant stress on factory suspension components. Old Man Emu front coil springs are engineered to handle these increased loads while improving overall ride control and maintaining increased ride height. These springs are manufactured from high-strength, micro-alloyed spring steel and undergo a double-scragging process to reduce internal stress and prevent sagging over time.

Each spring is formed on computer-controlled precision mandrels to ensure consistent performance and exact vehicle fitment. For maximum suspension integration, these coils are designed to work in conjunction with OME shock absorbers to deliver a tuned handling package tailored to your vehicle's specific application.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double-scragged to reduce internal stress and enhance spring lifespan
• Precision-formed on computer mandrels for consistent coil geometry
• Finished in a durable, corrosion-resistant black powder coat
• Designed and manufactured in Australia
• Manufacturer Part Number: 2882

Fits select 1996-2009 Toyota 4Runner and 1998-2004 Toyota Tacoma models.

ARB Old Man Emu (OME) front coil springs are engineered to provide superior ride control and load-carrying capacity for 4x4 vehicles. Designed specifically for the rigors of off-road travel, these springs help manage the additional weight of bumpers, winches, and equipment while maintaining optimal ride height and handling characteristics. Each spring is manufactured using high-strength, micro-alloyed spring steel and is double scragged to minimize stress and prevent future sagging.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double scragged before and after shot peening to reduce internal stress and enhance service life
• Formed on computer-precision mandrels to ensure consistent spring rates and fitment
• Finished in a durable, hard-wearing black powder coat for long-term corrosion resistance
• Designed and manufactured in Australia for demanding off-road environments
• Manufacturer Part Number: 2881

Fits select 1996-2004 Toyota 4Runner and Tacoma models.

Old Man Emu front coil springs are engineered to handle the demands of remote area travel and the weight of 4x4 accessories. Specifically designed for the Toyota 4Runner and Tacoma platforms, these springs provide a critical balance between increased ride height and superior ride control. By utilizing high-strength micro-alloyed spring steel and advanced manufacturing processes, OME ensures your vehicle remains stable and predictable even when fully loaded.

• Manufacturer Part Number: 2880
• Material: High-grade micro-alloyed spring steel for maximum durability and strength.
• Manufacturing Process: Formed on computer-precision mandrels to ensure consistent spring rates and fitment.
• Stress Relieving: Double scragged before and after shot peening to reduce internal stress and prevent sagging.
• Corrosion Protection: Finished in a durable, hard-wearing black powder coat.
• Design: Engineered and manufactured in Australia for heavy-duty off-road use.

For a complete suspension solution, these coils are best paired with a corresponding set of Old Man Emu shock absorbers to achieve a fully integrated and tuned system.

Fits 1998-2007 Toyota Land Cruiser Base models.

Engineered for the demands of remote 4x4 travel, Old Man Emu heavy-duty rear coil springs are designed to support the significant weight of additional fuel, water, and expedition gear. Unlike generic lift springs, the OME 2866 focuses on maintaining precise ride control and handling characteristics under load. These springs are mandrel-formed to ensure exact tolerances and are specifically tuned for the 100 Series Land Cruiser chassis.

• Manufactured from high-strength micro-alloyed spring steel for maximum durability and fatigue resistance.
• Double scragged to reduce internal spring stress and minimize settling over time.
• Precision-formed on computer-controlled mandrels to guarantee consistent spring rates and perfect vehicle fitment.
• Hard-wearing black powder coat finish provides superior protection against corrosion and debris.
• Engineered and manufactured in Australia for rigorous off-road environments.
• Designed to work as an integrated system when paired with Old Man Emu shock absorbers.
• Manufacturer Part Number: 2866

Fits 1998-2007 Toyota Land Cruiser and 1998-2000 Lexus LX470.

Old Man Emu (OME) 2865 Rear Coil Springs are engineered to handle the demands of remote off-road travel and heavy utility. Designed for the Toyota Land Cruiser 100 Series (IFS), these medium-load springs provide increased ride height while significantly improving vehicle control and handling. Each spring is manufactured from high-quality micro-alloyed spring steel to ensure long-term durability and resistance to sagging under load.

• Material: Micro-alloyed spring steel for maximum strength and fatigue resistance.
• Finish: Durable black powder coat for superior corrosion protection.
• Double Scragged: Pre-set to reduce internal spring stress and extend service life.
• Precision Formed: Coiled on computer-controlled mandrels to ensure consistency across the set.
• Performance: Optimized for ride control improvements and load management.
• Part Number: 2865
• Origin: Designed and manufactured in Australia.

For a fully integrated suspension system, these springs are best matched with a corresponding set of Old Man Emu shock absorbers, ensuring your vehicle maintains stability even when fully loaded with fuel, water, and gear.

Fits 1990-2000 Toyota Land Cruiser and 1996-2000 Lexus LX450 and LX470.

When your 4WD is fully loaded for remote travel, standard suspension components often struggle under the weight of additional fuel, water, and gear. These Old Man Emu (OME) Very Heavy Duty rear coil springs are engineered to manage significant weight while improving ride control and maintaining increased ride height. Manufactured from high-strength micro-alloyed spring steel, these coils are designed to withstand the stress of heavy-duty applications without sagging.

• Micro-Alloyed Spring Steel: Provides superior strength and durability over standard steel.
• Double Scragged: Each spring is compressed before and after shot-peening to reduce internal stress and extend service life.
• Precision Manufacturing: Formed on computer-precision mandrels to ensure consistent spring rates and exact fitment.
• Durable Finish: Coated in a hard-wearing black powder coat for long-term corrosion resistance.
• Optimized Performance: Best when paired with OME shock absorbers for a fully integrated suspension system.

• Manufacturer Part Number: 2864
• Position: Rear
• Load Rating: Very Heavy Duty (VHD)
• Country of Origin: Australia

Fits select 1990-2014 Toyota Land Cruiser, Lexus LX450, and Jeep Wrangler models.

When your 4WD is fully loaded with fuel, water, and recovery gear for remote travel or competition use, factory suspension often struggles under the load. Old Man Emu designs these coil springs to handle high-stress applications while improving ride control and maintaining increased ride height. Each spring is manufactured to exacting tolerances to ensure consistent performance and reliable vehicle fitment.

• Manufactured from high-strength micro-alloyed spring steel for long-term durability
• Double scragged to reduce internal stress and prevent spring sag over time
• Formed on computer-precision mandrels to ensure uniform coil diameter and rate
• Finished in a durable black powder coat for superior corrosion resistance
• Designed and manufactured in Australia specifically for heavy-duty 4x4 use
• Manufacturer Part Number: 2863J

Fits select 1990-2007 Toyota Land Cruiser and Lexus LX450/LX470 models.

When preparing for remote overland travel, the weight of extra fuel, water, and recovery gear can easily overload factory suspension components. Old Man Emu (OME) heavy-duty coil springs (MPN: 2863) are engineered to handle these increased loads while improving ride control and increasing ride height. Each spring is manufactured from high-strength, micro-alloyed spring steel and formed on computer-controlled mandrels for exact consistency across the coil set.

Designed specifically for the 80-series and 100-series platforms, these springs are double-scragged before and after shot-peening to reduce internal stress and prevent sagging over time. For the best performance, pair these with OME shock absorbers for a fully integrated suspension system tuned for the weight and handling characteristics of your vehicle.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double-scragged to minimize spring stress and extend service life
• Precision-formed on computer mandrels for consistent performance and fitment
• Finished in a durable black powder coat for superior corrosion resistance
• Heavy-duty rating specifically for vehicles carrying constant rear weight
• Manufacturer Part Number: 2863

Fits select 1990-1997 Toyota Land Cruiser and Lexus LX450.

When preparing for remote 4X4 travel, the added weight of fuel, water, spares, and recovery equipment puts significant strain on factory suspension. Old Man Emu (OME) heavy-duty coil springs are engineered to support fully loaded vehicles while prioritizing ride control and handling stability. Unlike generic lift springs, the OME 2862 is part of an integrated system designed to improve vehicle dynamics under load, especially when paired with OME shock absorbers.

Built to withstand the harsh conditions of the Australian outback, these springs are manufactured using precise tolerances and high-grade materials to ensure they maintain their height and spring rate over the life of the vehicle.

• Manufactured from micro-alloyed spring steel for exceptional strength and durability.
• Double scragged before and after shot-peening to reduce spring stress and prevent sagging.
• Formed on computer-precision mandrels to ensure perfect consistency and fitment.
• Finished in a hard-wearing black powder coat for long-term corrosion resistance.
• Constant variable rate design available to suit specific vehicle loading requirements.
• Designed and manufactured in Australia.
• Manufacturer Part Number: 2862

Fits 1990-1997 Toyota Land Cruiser and Lexus LX450 Base models.

Old Man Emu front coil springs are engineered specifically for the rigors of 4x4 travel and heavy load requirements. When vehicles are outfitted with essential off-road gear like fuel tanks, water storage, and recovery equipment, factory suspension often struggles. These 2861 springs are designed to restore ride control and handle increased weight while providing a durable solution for remote area travel.

Constructed from high-strength micro-alloyed spring steel, these coils undergo a double-scragging process to reduce internal stress and prevent future sagging. Each spring is formed on computer-precision mandrels to ensure consistent spring rates and exact fitment. The durable black powder coat finish provides long-term protection against corrosion and the elements.

• Manufacturer Part Number: 2861
• Material: Micro-alloyed spring steel for maximum strength and durability
• Finish: Heavy-duty black powder coat for corrosion resistance
• Manufacturing: Double scragged and precision mandrel-formed
• Design: Specific to 80 Series chassis for optimized ride control
• Origin: Designed and manufactured in Australia

Fits select 1990-2007 Toyota Land Cruiser and Lexus LX450/LX470 models.

Old Man Emu (OME) medium load rear coil springs are engineered to handle the unique demands of remote area travel and 4x4 touring. When your vehicle is loaded with fuel, water, and essential gear, factory suspension components often suffer from premature wear and sagging. These OME springs (MPN: 2860) provide a modest ride height increase while prioritizing ride control and handling stability under load.

Each spring is manufactured from high-strength micro-alloyed spring steel and undergoes a double-scragging process to reduce internal stress and prevent height loss over time. Formed on computer-precision mandrels, these coils ensure consistent spring rates and perfect fitment with your vehicle's factory mounting points or complementary OME shock absorbers.

• Manufactured from micro-alloyed spring steel for maximum strength and durability
• Double-scragged and load-tested to minimize spring stress and ensure longevity
• Formed on computer-precision mandrels for exact tolerances and consistency
• Durable black powder coat finish provides superior corrosion resistance
• Designed and manufactured in Australia specifically for heavy-duty off-road use
• Manufacturer Part Number: 2860

Fits 1990-1997 Toyota Land Cruiser and Lexus LX450 Base models.

Old Man Emu front coil springs are engineered to handle the increased weight requirements of 4x4 vehicles while improving ride control and load-carrying capacity. Part number 2851 is a medium-load spring designed specifically for the 80-series chassis, providing a lift height increase while maintaining a refined ride when matched with OME shock absorbers. These springs replace worn factory units to restore ride height and improve handling stability on and off the trail.

• Material: Manufactured from high-strength, micro-alloyed spring steel for maximum durability and resistance to sagging.
• Precision Manufacturing: Formed on computer-controlled mandrels to ensure consistent spring rates and height across every coil.
• Double Scragged: Pre-set to reduce internal spring stress and enhance overall service life.
• Corrosion Resistance: Finished in a resilient black powder coat to withstand harsh environmental conditions.
• Application: Medium-load front coil spring (MPN: 2851).
• Origin: Designed and manufactured in Australia.

Fits 1990-1997 Toyota Land Cruiser and Lexus LX450.

Old Man Emu (OME) 2850J coil springs are engineered to handle the extreme demands of remote 4x4 travel and competition use. When vehicles are fully loaded with extra fuel, water, and gear, factory suspension often struggles with the added weight. These springs are designed specifically to improve ride control and support heavy loads while maintaining consistent performance over harsh terrain.

Each spring is manufactured from high-strength, micro-alloyed spring steel for maximum durability. To ensure a long service life and prevent sagging, every coil is double scragged to reduce internal stress. Precision-formed on computer-controlled mandrels, these springs offer exact fitment and reliable spring rates for the Lexus LX450 and 80-series Toyota Land Cruiser.

• Manufacturer Part Number: 2850J
• Material: Micro-alloyed spring steel for strength and durability
• Manufacturing: Computer-precision mandrel formed to ensure consistency
• Finish: Durable black powder coat for superior corrosion resistance
• Testing: Double scragged to reduce spring stress and enhance lifespan
• Application: Specifically rated for export and competition use
• Country of Origin: Designed and manufactured in Australia