Today, more and more premium vehicles are being fitted with an electronically adaptive suspension system. Before KW DDC Plug & Play coilovers were introduced to the market, you often had to make compromises when customizing your suspension lowering, and often had to eliminate the active electronic control system and comfort features that you had paid extra for. With the adaptive KW DDC Plug & Play coilover suspensions there are no compromises to be made and you can combine the control of your standard damper system with a seamless suspension lowering and the driving dynamics tuned by KW suspensions experienced engineers. During installation, the factory electronic struts are simply replaced by KW INOX-LINE stainless steel coilover struts and the adaptive KW dampers are connected to the on-board electronics using your vehicles original plugs. Fitting a KW DDC Plug & Play coilover suspension requires no further modifications. The standard dampers can simply be replaced with the KW DDC (Dynamic Damping Control) coilover kit. The existing controls and the button installed in the vehicle interior for the operation of the damper control will now operate the KW DDC Plug & Play coilovers. For the first time, the KW DDC Plug & Play coilover kit combines the advantages of a KW coilover suspension with the convenience of the standard electronic damper controls. At the push of a button, the driver can choose between the Comfort, Normal and Sport setup optimized for the KW coilover suspension. In addition, the KW coilover suspension allows individual ride height adjustability within the tested Adjustment -angle. Our original equipment quality suspension technology -s compatible with various vehicle manufacturers. As a result, the adaptive KW DDC suspension is instantly recognized by the on-board electronics. So all the displays and controls of your factory vehicle remain fully functional but you get a completely new driving experience.

• Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
• Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
• Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.
• KW DDC Plug & Play electronically controlled coilover suspension allow seamless integration with your OEM electronic suspension computer systems allowing you to maintain your factory adaptive suspension functionality.
• Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.
• KW suspensions DDC Plug & Play coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
• Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.
• Limited Lifetime Warranty - Unlimited Mileage

This Part Fits:

Fits 2022-2026 Audi RS3 Base models (GY) equipped with factory electronic damping systems.

The KW DDC (Dynamic Damping Control) Plug & Play coilover kit provides a suspension solution for Audi RS3 owners who want lowered ride height and improved handling without sacrificing the vehicle's factory adaptive damping features. Unlike traditional coilovers that require electronic cancellers, this system integrates directly with the Audi on-board electronics. The factory electronic struts are replaced with KW INOX-LINE stainless steel units that plug into the original vehicle connectors, allowing you to continue using the factory interior controls to toggle between Comfort, Normal, and Sport damping modes.

• Seamless Integration: Specifically engineered to communicate with the OEM electronic suspension computer.
• INOX-LINE Construction: Stainless steel strut bodies provide permanent corrosion resistance and an unlimited lifespan.
• Precision Height Adjustment: Friction-optimized polyamide composite spring perches with stainless steel inserts allow for easy ride height tuning without oxidation.
• Ride Quality: Elastomer bump stops with integrated dust protection prevent contaminants from reaching the piston rod and seals.
• Quality Assurance: Every damper is dyno-tested for accuracy and performance before leaving the factory in Fichtenberg, Germany.
• MPN: 39010059
• Warranty: Limited Lifetime Warranty / Unlimited Mileage

Fits 2023-2025 Nissan Z (RZ34) Sport, Performance, Proto Spec, and Nismo models.

The KW Variant 3 (V3) coilover kit is the definitive suspension upgrade for the RZ34 Nissan Z, engineered to provide motorsports-level damping technology for the street. This kit utilizes KW's patented twin-valve technology to allow for independent adjustment of both rebound and compression damping. By separating these forces, drivers can fine-tune the RZ34 chassis to compensate for different tire compounds, vehicle weight changes, or specific handling preferences without compromising the overall spring-rate balance.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for comfort during slow damper speeds, while the main rebound valve opens during high-speed impacts to manage fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Allows for precise low-speed compression tuning to reduce body roll and pitching during acceleration and braking while maintaining a high-speed blow-off feature.
• Inox-Line Stainless Steel: Strut bodies are manufactured from high-quality stainless steel for permanent corrosion resistance and an unlimited lifespan, ensuring height-adjustment threads never seize.
• Composite Spring Perches: Friction-optimized polyamide composite perches with stainless steel inserts prevent oxidation and ensure ease of adjustment over time.
• Precision Engineered: Every kit (MPN 35285019) is hand-built in Fichtenberg, Germany, and each damper is dyno-tested to ensure performance meets KW's rigorous factory standards.

Each kit includes an elastomer bump stop with an integrated dust protection system to shield the piston rod and seals from road debris, ensuring long-term durability for high-performance daily driving.

Fits 1990-1996 Nissan 300ZX models, including Base, Turbo, and 2+2 chassis.

The KW Variant 3 (V3) coilover kit is engineered for performance-oriented drivers who demand precise control over their suspension dynamics. This system utilizes motorsport-derived technology to provide independent adjustment of both rebound and compression damping, allowing you to tune the handling characteristics of your Z32 to match your specific driving style, tire setup, and vehicle weight. The dampers feature KW's patented Inox-Line stainless steel bodies, ensuring that the height adjustment remains functional even after years of exposure to the elements.

• TVR-A (Twin Valve Rebound - Adjustable): Allows for 16 clicks of rebound adjustment via a conical low-speed bypass, while the main rebound valve opens during high-speed movements to maintain ride quality.
• TVC-A (Twin Valve Compression - Adjustable): Features 12 clicks of low-speed compression adjustment to control body roll and turn-in behavior without affecting the high-speed blow-off valve.
• Inox-Line Construction: Stainless steel strut bodies provide permanent corrosion resistance and an unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite perches with stainless steel inserts prevent oxidation and seizing.
• Pre-set and Tested: Every damper is dyno-tested and preset to KW's recommended baseline settings before leaving the factory in Fichtenberg, Germany.
• Manufacturer Part Number: 35285009

Fits 1991-1994 Porsche 911 (964) Carrera 2, RS America, and Speedster models (including Convertible and Targa).

The KW Variant 3 (V3) coilover kit is engineered for performance-oriented drivers who require independent control over their suspension's damping characteristics. Utilizing cutting-edge motorsports technology, this kit significantly reduces body roll, pitch, and squat during aggressive load changes, cornering, and braking. By improving tire contact and providing precise feedback, the V3 system enhances both safety and handling dynamics on the street or the track.

Constructed from Inox-line stainless steel, these coilovers offer permanent corrosion resistance and a long service life. The kit features KW's patented TVR-A and TVC-A valve technology, allowing you to fine-tune the rebound and compression damping separately to account for vehicle weight, tire characteristics, or driving preference.

• Independent Damping Adjustment: 16 clicks of rebound damping and 12 clicks of compression damping for precise tuning.
• TVR-A (Twin Valve Rebound - Adjustable): Controls low-speed damping via an adjustable conical bypass for comfort, while the main valve handles high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve allows for fine-tuning low-speed damping with a high-speed blow-off feature to maximize grip.
• Inox-Line Stainless Steel: Durable construction prevents oxidation and ensures the suspension remains adjustable for the life of the vehicle.
• Composite Spring Perches: Wear-resistant polyamide composite with stainless steel inserts for maximum strength and friction optimization.
• Quality Tested: Each kit is hand-built in Fichtenberg, Germany, and dyno-tested to ensure performance and accuracy.
• MPN: 35271011

Fits 1994-1998 Porsche 911 (993) Carrera 4, Carrera 4S, Turbo, and Turbo 3.6 models (including Convertibles).

The KW Variant 3 (V3) coilover kit is an advanced suspension solution designed for the Porsche 911 (993) chassis, offering a balance of motorsports-derived technology and street-legal refinement. This kit provides independent adjustment of both rebound and compression damping, allowing drivers to fine-tune steering behavior, directional stability, and grip for specific tire characteristics or vehicle weight changes. By reducing body roll, pitching, and squat, the KW V3 improves overall vehicle control during high-speed cornering and emergency maneuvers.

• TVR-A (Twin Valve Rebound - Adjustable) Technology: Employs an adjustable, conical low-speed bypass for comfort during slow damper speeds, with a main rebound valve that opens at higher speeds for maximum fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable) Technology: A patented compression valve that allows for precise low-speed tuning, featuring a blow-off function to maximize flow during sudden high piston speeds.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance, ensuring the threads and components remain adjustable and functional for the life of the vehicle.
• Composite Spring Perches: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and maximizes strength.
• High-Resilient Elastomer Bump Stops: Feature integrated dust protection to prevent contaminants from reaching the seals while acting as dynamic load limiters.
• Quality Tested: Each kit is hand-built in Fichtenberg, Germany, and every damper is dyno-tested to ensure performance accuracy before delivery.

Manufacturer Part Number: 35271005

Fits select 1994-1998 Porsche 911 (993) Carrera, Carrera 2, Carrera S, Speedster, and Targa models.

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers seeking race-derived damping technology for the street. This system utilizes KW's patented TVR-A and TVC-A technology, allowing for independent adjustment of rebound and compression damping. By separating these damping stages, you can fine-tune your Porsche 993's steering behavior, directional stability, and mechanical grip without compromising the matched spring rates. The result is a significant reduction in body roll and pitch during high-speed cornering, acceleration, and aggressive braking.

Each damper is manufactured using KW Inox-line stainless steel for permanent corrosion resistance, ensuring the height-adjustment threads remain functional for the life of the vehicle. The kit includes friction-optimized polyamide composite spring perches with stainless steel inserts for maximum strength and oxidation resistance. Every KW V3 kit (MPN: 35271004) is hand-built and dyno-tested in Fichtenberg, Germany, to ensure precision performance and consistency.

• TVR-A (Twin Valve Rebound - Adjustable): 16-click adjustable low-speed rebound bypass allows for precise control over ride comfort and steering feedback.
• TVC-A (Twin Valve Compression - Adjustable): 12-click adjustable low-speed compression to manage body roll and tire turn-in without affecting the high-speed blow-off valve.
• Inox-Line Stainless Steel: Strut housings designed for 100% corrosion resistance and an unlimited lifespan in all weather conditions.
• Composite Spring Perches: Wear-resistant polyamide composite prevents seizing between the perch and the stainless steel strut body.
• Complete Assembly: Includes elastomer bump stops with integrated dust protection to prevent contaminants from reaching the piston rod seals.

Fits 2016-2024 Chevrolet Camaro LS, LT, LT1, SS, and ZL1 models without electronic dampers.

The KW V3 Coilover suspension kit is engineered for performance-oriented drivers who demand precise control over their vehicle's handling dynamics. Built with KW's proprietary Inox-Line stainless steel technology, these coilovers provide permanent corrosion resistance and an unlimited lifespan, ensuring the spring perches remain adjustable even after years of use. Unlike standard suspension kits, the V3 features separate, independent adjustment for both compression and rebound damping, allowing for a customized setup that matches specific tire characteristics, vehicle weight, and driving style.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for comfort during slow damper speeds, while the main rebound valve opens at high speeds for maximum fluid displacement and stability.
• TVC-A (Twin Valve Compression - Adjustable): This patented valve allows for fine-tuning low-speed compression to control body roll and squat, with a high-speed blow-off feature to absorb sudden impacts.
• Inox-Line Stainless Steel: Strut housings are constructed from high-quality stainless steel to prevent oxidation and ensure durability.
• Composite Spring Perch: Manufactured from wear-resistant, friction-optimized polyamide composite with a stainless steel insert for maximum load-bearing strength.
• Hand-Built Quality: Each kit is hand-assembled in Fichtenberg, Germany, and every individual damper is dyno-tested to ensure accuracy to the factory preset settings.

By independently adjusting the compression and rebound, you can improve cornering behavior, increase tire grip, and reduce pitch and roll during aggressive maneuvers without compromising the ride quality matched to your spring rate. Part Number: 35261027.

Fits 1993-1998 Toyota Supra Base and Twin Turbo models.

The KW Variant 3 (V3) coilover kit brings motorsports-derived suspension technology to the JZA80 chassis. Engineered for performance-oriented drivers, the V3 system provides independent adjustment of rebound and compression damping, allowing you to fine-tune the handling characteristics of your Supra for different tire setups, vehicle weights, or chassis rigidity requirements.

Built with KW's proprietary Inox-line stainless steel technology, these coilovers are designed for permanent corrosion resistance and long-term durability. Each kit features patented twin-valve technology (TVR-A and TVC-A) to manage oil flow during low and high piston speeds, ensuring consistent damping through corners, heavy braking, and rapid weight transfers.

• TVR-A (Twin Valve Rebound - Adjustable): Features 16 clicks of adjustment to control low-speed rebound through a conical bypass, improving ride comfort and body control.
• TVC-A (Twin Valve Compression - Adjustable): Provides 12 clicks of low-speed compression adjustment to optimize tire grip and steering behavior without affecting the rebound stage.
• Inox-Line Stainless Steel: Corrosion-resistant strut bodies ensure the height-adjustable trapezoidal threads remain functional for the life of the vehicle.
• Composite Spring Perch: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and seizing.
• Manufacturing: Hand-built in Fichtenberg, Germany, and dyno-tested to ensure each damper meets strict performance tolerances.
• MPN: 35256010

The KW V3 Coilover kit provides a significant upgrade in handling dynamics and vehicle control for the 2017-2025 Honda Civic Type R and 2024-2025 Acura Integra Type S. Engineered with motorsport-derived damping technology, this kit allows for independent adjustment of both compression and rebound stages, enabling drivers to fine-tune their suspension for specific tire characteristics, vehicle weight, or road conditions. This specific kit includes electronic damper cancellation (EDC) delete modules to ensure a seamless installation without dashboard error codes on vehicles equipped with factory adaptive suspension.

• TVR-A (Twin Valve Rebound - Adjustable) technology: 16 clicks of rebound adjustment to control pitch and roll
• TVC-A (Twin Valve Compression - Adjustable) technology: 12 clicks of low-speed compression adjustment for steering precision and grip
• Inox-Line stainless steel strut bodies for permanent corrosion resistance and long-term height adjustability
• Friction-optimized polyamide composite spring perches with stainless steel inserts for maximum durability
• Includes application-specific electronic damper delete modules
• Each unit is hand-built in Germany and individual dyno-tested for accuracy
• Manufacturer Part Number: 35250036

Fits 1991-2005 Acura NSX Base, T, and Alex Zanardi Edition (NA1) models.

The KW Variant 3 (V3) coilover kit brings track-tested motorsports technology to the street, offering a significant upgrade in handling precision and safety reserves for the Acura NSX. Utilizing a patented dual-valve damping system, this kit allows for independent adjustment of both compression and rebound stages, enabling enthusiasts to fine-tune the suspension for specific tire characteristics, vehicle weight changes, or personal driving preferences without compromising ride quality.

Constructed with KW’s proprietary Inox-line stainless steel technology, these struts provide permanent corrosion resistance and an unlimited lifespan, even under harsh conditions. The assembly includes friction-optimized polyamide composite spring perches with stainless steel inserts for maximum durability. Each kit is hand-built and dyno-tested in Fichtenberg, Germany, ensuring that every damper meets strict performance tolerances before installation.

• TVR-A (Twin Valve Rebound - Adjustable) technology for 16 clicks of low-speed rebound damping control.
• TVC-A (Twin Valve Compression - Adjustable) technology for 12 clicks of low-speed compression adjustment.
• Inox-line stainless steel strut bodies for 100% corrosion resistance.
• Elastomer bump stops with integrated dust protection for long-term seal integrity.
• High-resilience springs and elastomer elements designed to reduce pitch and roll.
• Individually serial-numbered and dyno-tested for accuracy.
• Manufacturer Part Number: 35250022

Fits 2015-2021 Subaru WRX and WRX STI (including Base, Limited, Premium, Launch Edition, S209, Series.HyperBlue, and Type RA).

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who require precise control over their suspension dynamics. Featuring patented TVR-A and TVC-A technology, this system allows for independent adjustment of both rebound and compression damping. This dual-valve technology enables you to fine-tune steering behavior, directional stability, and grip levels without compromising the primary damping characteristics matched to the spring rate.

Built for longevity in harsh environments, the dampers feature Inox-Line stainless steel bodies that provide permanent corrosion resistance. The kit includes friction-optimized composite spring perches with stainless steel inserts and elastomer bump stops with integrated dust protection to shield the piston rods and seals from road debris.

• MPN: 35245018
• Technology: TVR-A (Twin Valve Rebound) and TVC-A (Twin Valve Compression) adjustable
• Material: Inox-Line stainless steel strut housings
• Adjustment: Independent 16-click rebound and 12-click compression damping
• Components: Polyamide composite spring perches, elastomer bump stops, and integrated dust boots
• Manufacturing: Hand-built and dyno-tested in Fichtenberg, Germany

Fits 2019-2026 BMW Z4 and 2020-2026 Toyota GR Supra (2WD).

The KW V3 Clubsport coilover kit is engineered specifically for track-oriented performance and double-duty street vehicles utilizing ultra-high-performance or DOT-R tire setups. Developed on the Nürburgring Nordschleife, this kit provides an unmatched level of adjustment to maximize steering behavior, grip, and handling dynamics for high-performance driver's education (HPDE), time attack, and club-level racing.

This kit features KW's patented TVR-A and TVC-A valve technology, offering independent 2-way damping. The stainless-steel Inox-Line construction ensures permanent corrosion resistance, while the linear race springs and solid aluminum unibal top mounts deliver precise steering feedback by eliminating rubber deflection. Each kit is hand-built and dyno-tested to ensure accuracy and repeatability at the limit.

• Part Number: 352208CG
• TVR-A (Twin Valve Rebound) technology for adjustable low-speed bypass
• TVC-A (Twin Valve Compression) technology for low-speed fine-tuning and high-speed blow-off
• Inox-Line stainless steel strut bodies for unlimited lifespan
• Solid aluminum unibal top mounts for increased camber adjustment and feedback
• Composite spring perches with stainless steel inserts for strength and oxidation resistance
• Individually adjustable ride height for precise corner weighting
• Includes application-specific linear race springs

Fits 2022-2026 BMW M3 and M4 (G80/G82) Competition xDrive and CS models equipped with electronic dampers.

The KW V3 Coilover kit (MPN 352200EQ) utilizes race-derived technology to transform the handling dynamics of the G8x chassis. Engineered for performance-oriented drivers, this kit offers independent adjustment of compression and rebound damping, allowing for precise chassis tuning to match tire characteristics, vehicle weight, and driving environment. By reducing pitching and rolling during aggressive cornering and braking, the V3 system improves mechanical grip and provides more predictable feedback at the limit.

• TVR-A (Twin Valve Rebound - Adjustable): Allows for fine-tuning of low-speed rebound through a conical bypass, while the main valve handles high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve allows for low-speed adjustment with a high-speed blow-off feature to maintain stability over sudden impacts.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance and ensures the threaded struts remain adjustable throughout the lifespan of the vehicle.
• Composite Spring Perch: Constructed from friction-optimized polyamide with a stainless steel insert for maximum strength without oxidation.
• Quality Assured: Each kit is hand-built in Fichtenberg, Germany, and every individual damper is dyno-tested to ensure performance and accuracy before shipping.

Fitment Applications:
2022-2025 BMW M3 Competition xDrive
2024 BMW M3 CS
2022 BMW M4 Competition
2022-2026 BMW M4 Competition xDrive

The KW Suspension Variant 3 (V3) Coilover Kit fits select 2021-2026 BMW M2 (G87), M3 (G80), and M4 (G82) models, providing significant improvements in handling, body control, and high-speed stability.

Engineered for performance-oriented drivers, the V3 system utilizes patented TVR-A (Twin Valve Rebound - Adjustable) and TVC-A (Twin Valve Compression - Adjustable) technology. This allows for independent adjustment of both rebound and compression damping, enabling you to fine-tune the suspension for specific tire characteristics, vehicle weight changes, or personal driving preferences without compromising the baseline damping profile. The result is a significant reduction in pitch and roll during aggressive cornering, acceleration, and braking.

Built to withstand harsh environments, the dampers feature KW's Inox-Line stainless steel bodies for permanent corrosion resistance, paired with friction-optimized polyamide composite spring perches. Each kit is hand-assembled in Fichtenberg, Germany, and dyno-tested to ensure precise damping force across all four corners.

• Fits 2023-2025 BMW M2 (Base) and 2021-2025 BMW M3 (Base/Competition) and 2021-2026 BMW M4 (Base/Competition).
• Independently adjustable rebound (TVR-A) and compression (TVC-A) damping.
• Inox-Line stainless steel strut housings for 100% corrosion resistance.
• Composite spring perches with stainless steel inserts for durability and easy adjustment.
• Elastomer bump stops with integrated dust protection for increased seal longevity.
• Individually serialized and dyno-tested for quality assurance.
• Manufacturer Part Number: 352200EB

Fits 2019-2026 BMW Z4 (sDrive30i, M40i) and Toyota GR Supra models equipped with electronic dampers.

The KW V3 (Variant 3) Coilover Kit is engineered for performance-oriented drivers who demand precise control over their vehicle's handling dynamics. By utilizing patented TVR-A (Twin Valve Rebound - Adjustable) and TVC-A (Twin Valve Compression - Adjustable) technology, this system allows for independent adjustment of both rebound and compression damping. This dual-valve design enables you to fine-tune steering behavior, directional stability, and tire grip for repeatable results at the limit, without the compromises found in single-adjustable dampers.

Each kit features KW’s Inox-Line stainless steel strut housings, ensuring permanent corrosion resistance even under heavy use or harsh conditions. The composite spring perches are reinforced with stainless steel inserts to prevent oxidation and ensure ease of height adjustment over the life of the vehicle. Every damper unit is dyno-tested and preset to KW's recommended base settings before leaving the factory in Fichtenberg, Germany.

• Manufacturer Part Number: 352200CH
• TVR-A Technology: Adjustable low-speed rebound bypass for tailored comfort and handling
• TVC-A Technology: Patented compression valve for independent low-speed tuning
• Inox-Line: 100% corrosion-resistant stainless steel construction
• Adjustment: Independent 16-click rebound and 12-click compression damping
• Includes: Four coilovers, elastomer bump stops with integrated dust protection, and adjustment tools

Fits 2016-2021 BMW M2 models, including Base, Competition, and CS. The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who require independent control over suspension dynamics. Utilizing patented motorsports technology, this kit allows for separate adjustment of rebound and compression damping, enabling you to fine-tune the handling characteristics of your M2 for specific tire setups, vehicle weight changes, or personal driving preferences.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for slow damper speeds and a main rebound valve that opens at higher speeds to manage fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Allows for precise low-speed compression tuning with a blow-off feature for high-piston speeds to maximize flow and maintain stability.
• Inox-Line Stainless Steel: Provides 100% corrosion resistance with a finish that will not wear off during height adjustments, ensuring an unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite encompassing a stainless steel insert for maximum strength without oxidation.
• Precision Engineering: Each damper is hand-built in Germany, dyno-tested for accuracy, and features an individual serial number.
• Part Number: 352200BH

Fits 2015-2020 BMW M3 and M4 models (F80/F82), including Base, CS, and GTS trims. This kit includes the electronic cancellation modules required for vehicles equipped with factory electronic damping control (EDC).

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who demand precise control over their suspension dynamics. Utilizing patented motorsports technology, the V3 system allows for independent adjustment of both compression and rebound damping, enabling you to fine-tune the chassis for specific tire characteristics, vehicle weight changes, or personal handling preferences. The dampers feature KW's Inox-Line stainless steel construction, ensuring the threaded struts remain 100% corrosion-resistant and adjustable throughout the life of the vehicle.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of rebound adjustment to control pitch and roll while optimizing ride comfort.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of low-speed compression adjustment to manage weight transfer and improve turn-in grip without affecting the high-speed blow-off.
• Inox-Line Stainless Steel: Highly durable finish that prevents oxidation and ensures the composite spring perches never seize.
• Complete Solution: Includes electronic cancellation modules to prevent dashboard error codes when replacing the factory electronic suspension.
• Manufacturer Part Number: 352200AP
• Origin: Hand-built and dyno-tested in Fichtenberg, Germany.

Fits 2015-2020 BMW M3 and M4 (F80/F82) including Base, CS, and GTS trims.

The KW V3 (Variant 3) coilover kit is engineered for performance-oriented drivers who require precise control over their chassis dynamics. Featuring patented TVR-A and TVC-A technology, this system allows for independent adjustment of both rebound and compression damping. This dual-level tuning enables you to sharpen steering response and directional stability through 16 clicks of rebound, while managing body roll and tire grip through 12 clicks of compression damping.

Built for longevity in harsh environments, the KW V3 utilizes Inox-Line stainless steel strut housings for permanent corrosion resistance. The friction-optimized polyamide composite spring perches prevent oxidation between the perch and the strut body, ensuring the height remains adjustable even after years of use.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of adjustment to fine-tune handling and ride comfort.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of low-speed compression adjustment to control pitch and roll without affecting the rebound curve.
• Inox-Line Stainless Steel: High-quality construction that will not rust or seize, ensuring an unlimited lifespan.
• Composite Spring Perch: Wear-resistant polyamide composite with a stainless steel insert for maximum strength and corrosion-free height adjustment.
• Complete Protection: Elastomer bump stops with integrated dust covers protect the piston rods and seals from road debris.
• Dyno Tested: Every damper is dyno-tested and preset to KW’s recommended baseline settings before delivery.
• Manufacturer Part Number: 352200AN

Fits 2014-2019 BMW X5 and X6 models equipped with factory rear air suspension and Electronic Damper Control (EDC).

The KW V3 (Variant 3) Coilover Kit brings adjustable motorsport technology to the street, allowing for precise control over your vehicle's driving dynamics. Engineered for the BMW X5 (F15) and X6 (F86) platforms, this kit includes the necessary components to integrate with factory rear air suspension and bypass the Electronic Damper Control (EDC) system without triggering error codes. The V3 system significantly reduces body roll, pitching, and squat during weight transfer, providing improved steering feedback and shorter braking distances.

• TVR-A (Twin Valve Rebound): 16 clicks of adjustable rebound damping allow you to fine-tune handling and comfort by controlling how the damper extends.
• TVC-A (Twin Valve Compression): 12 clicks of adjustable low-speed compression damping to influence steering behavior, grip levels, and handling without affecting the rebound settings.
• Inox-Line Stainless Steel: Corrosion-resistant strut bodies and friction-optimized polyamide composite perches ensure the suspension remains adjustable even after years of exposure to the elements.
• Safety and Quality: Every kit is hand-assembled and dyno-tested in Fichtenberg, Germany, featuring application-specific spring rates and elastomer bump stops with integrated dust protection.
• Manufacturer Part Number: 352200AM

Vehicle Fitment

• 2015-2018 BMW X5 M
• 2014-2018 BMW X5 sDrive35i
• 2014-2018 BMW X5 xDrive35d
• 2014-2018 BMW X5 xDrive35i
• 2016-2018 BMW X5 xDrive40e
• 2014-2018 BMW X5 xDrive50i
• 2015-2019 BMW X6 M

Fits 2001-2006 BMW M3 Base.

The KW V3 Coilover suspension kit is engineered for performance-oriented drivers seeking precise control over vehicle handling dynamics. Built with patented "inox-line" stainless steel technology, these coilovers provide permanent corrosion resistance and an unlimited lifespan. The V3 system features independent adjustment for both rebound and compression damping, allowing you to fine-tune the E46 M3 chassis to match specific tire characteristics, vehicle weight, and driving preferences without compromising ride quality.

• TVR-A (Twin Valve Rebound - Adjustable): Allows oil to flow through an adjustable conical low-speed bypass during slow damper speeds, while the main rebound valve opens for high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve enables fine-tuning of low-speed damping with a blow-off feature to maximize flow during sudden high piston speeds.
• Inox-Line Stainless Steel: Truly permanent corrosion resistance ensures the strut housings and adjustment threads remain functional for the life of the vehicle.
• Composite Spring Perches: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and maximizes strength.
• Individually Dyno Tested: Each damper is hand-built in Germany and dyno-tested to ensure accuracy before being preset to KW's recommended shock settings.

Manufacturer Part Number: 35220023

Fits 2000-2003 BMW M5 Base (E39) Sedan.

The KW Variant 3 (V3) Coilover suspension kit is engineered for performance-oriented drivers who demand independent control over damping characteristics. Utilizing patented motorsports technology, the V3 system allows for separate adjustment of rebound and compression stages to fine-tune steering behavior, directional stability, and grip for any driving environment.

Constructed with KW Inox-Line stainless steel strut housings, these coilovers provide permanent corrosion resistance and durability. The kit features friction-optimized polyamide composite spring perches with stainless steel inserts, ensuring easy height adjustment for the life of the vehicle without oxidation or seizing. Each unit is hand-built and dyno-tested to ensure accuracy and performance before leaving the factory.

• TVR-A (Twin Valve Rebound - Adjustable) technology for precise low-speed bypass control
• TVC-A (Twin Valve Compression - Adjustable) technology for high-speed blow-off and low-speed tuning
• Inox-Line stainless steel bodies for maximum corrosion resistance
• Dirt-resistant trapezoidal threads and composite spring perches
• Individually height-adjustable on both front and rear axles
• High-resilient elastomer bump stops with integrated dust protection
• Manufacturer Part Number: 35220018

Fits 2017-2020 Audi RS3 Base models equipped with Electronic Damper Control (EDC).

The KW V3 (Variant 3) Coilover Kit provides the ultimate in street performance and customizability for the Audi RS3 (8V) platform. Engineered in Germany, this kit utilizes motorsports-derived technology to significantly reduce body roll, pitch, and squat during aggressive driving maneuvers. The V3 system features independent damping adjustment, allowing you to fine-tune the suspension to your specific tires, vehicle weight, and road conditions without compromising the balance between rebound and compression.

Constructed with KW’s signature "inox-line" stainless steel technology, these coilovers offer permanent corrosion resistance, ensuring the height-adjustment threads remain functional for the life of the vehicle. Each kit features TVR-A and TVC-A valving for precise low-speed damping control while maintaining high-speed blow-off for road comfort.

• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of rebound adjustment to influence handling and comfort.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of compression damping to control body roll and tire grip.
• Inox-Line Stainless Steel: 100% corrosion-resistant strut housings for unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite with stainless steel inserts prevents oxidation and seizing.
• Safety & Quality: Hand-built in Fichtenberg, Germany; each damper is dyno-tested and serialized.
• MPN: 352100AL

Fits select 2008-2017 Audi A4, A5, RS5, S4, and S5 models without electronic damping control (Non-EDC).

The KW Variant 3 (V3) Coilover Kit is the benchmark for performance street suspension, offering race-derived technology for daily use. Unlike standard coilovers, the V3 features independent adjustment for both compression and rebound damping. This allows for precise tuning of the vehicle's pitch and roll behavior, improving tire grip and handling without sacrificing ride quality. Developed and manufactured in Germany, each kit is designed to reduce braking distances and improve steering feedback through advanced damping technology.

• TVR-A (Twin Valve Rebound - Adjustable): Conical low-speed bypass allows for comfort-oriented tuning, while the main rebound valve handles high-speed fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable): Patented valve allows for fine-tuning of low-speed compression with a blow-off feature to maximize flow during sudden high piston speeds.
• Inox-Line Stainless Steel: Permanent corrosion resistance ensures that the adjustment threads will not seize or wear over the life of the vehicle.
• Composite Spring Perch: Made from wear-resistant, friction-optimized polyamide with a stainless steel insert for maximum strength and ease of adjustment.
• Hand-Built Quality: Each kit is dyno-tested and given a unique serial number at KW headquarters in Fichtenberg, Germany.

Manufacturer Part Number: 35210075

Fits 2007-2008 Audi RS4 Base models (QB6 Sedan Quattro).

The KW V3 Coilover kit (Variant 3) is a benchmark for performance-oriented street driving, utilizing motorsports-derived technology to deliver significant improvements in handling, stability, and safety. By replacing the factory suspension with KW’s high-quality dampers and springs, you significantly reduce pitching and rolling during aggressive cornering, acceleration, and braking. This kit is specifically designed for the Audi RS4 platform, providing the feedback and support necessary for confident driving at the limit.

The V3 stands out with its ability to adjust compression and rebound damping independently. Using patented TVR-A and TVC-A valve technology, you can fine-tune the low-speed damping to influence steering behavior and grip without affecting the ride quality provided by the high-speed blow-off valves. This ensures a custom-tailored setup that matches your specific tire characteristics and vehicle weight.

• Manufacturer Part Number: 35210051
• TVR-A (Twin Valve Rebound - Adjustable): 16 clicks of adjustment to bypass the low-speed conical valve for precise rebound control.
• TVC-A (Twin Valve Compression - Adjustable): 12 clicks of adjustment to tune low-speed compression while high-speed valves handle sudden impacts.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance and an unlimited lifespan, ensuring height adjustments remain easy for years.
• Composite Spring Perches: Friction-optimized polyamide perches with stainless steel inserts prevent oxidation and maintain structural strength.
• Dyno-Tested Quality: Each damper is hand-built in Germany and dyno-tested to ensure performance matches factory-recommended settings.
• Note: This kit requires the 68510141 cancellation kit for installation on vehicles equipped with electronic damping systems.

Fits 2003-2007 Infiniti G35 and 2003-2009 Nissan 350Z.

The KW V2 Inox-Line coilover kit is the ideal solution for enthusiasts who want more than just a lowered stance. Engineered with KW's patented TVR-A (Twin Valve Rebound - Adjustable) technology, this system allows you to fine-tune the rebound damping with 16 precise clicks. This adjustability gives you direct control over handling dynamics and ride comfort, allowing for a firmer setup for spirited driving or a softer setting for daily commuting without affecting the factory-optimized compression damping.

Built for long-term durability, the V2 series features Inox-Line stainless steel strut housings that are 100% corrosion-resistant. Height adjustments remain effortless even after years of use thanks to the dirt-resistant trapezoid threads and friction-optimized polyamide composite adjustment collars. Each kit is hand-built in Fichtenberg, Germany, and dyno-tested to ensure every damper meets strict performance tolerances before shipping.

• TVR-A Technology: Two-stage rebound valves provide a low-speed bypass for comfort and a high-speed main valve for maximum fluid displacement and body control.
• Adjustable Damping: 16 clicks of rebound adjustment to influence handling and comfort.
• Inox-Line Construction: Stainless steel bodies for permanent corrosion resistance and an unlimited lifespan.
• Composite Spring Perches: Wear-resistant polyamide composite with stainless-steel inserts to prevent oxidation and seizing.
• Vehicle Specific: Precisely tuned spring rates and damper settings developed on the Nurburgring and KW 7-post rig.
• Manufacturer Part Number: 15285002

Fits 2002-2006 Acura RSX Base and Type-S.

The KW V2 Inox-Line coilover kit is engineered for drivers who demand more than a simple lowering solution. Built with stainless steel "Inox-Line" struts and corrosion-resistant components, this kit ensures long-term durability and ease of adjustment on the DC5 chassis. The V2 series features integrated TVR-A (Twin Valve Rebound - Adjustable) technology, allowing you to fine-tune the handling and comfort of your RSX with 16 precise clicks of rebound damping.

• Adjustable Rebound Damping: 16 clicks of rebound adjustment allow you to prioritize either body control or ride comfort without altering compression damping.
• TVR-A Technology: Patented twin-valve bypass enables smooth oil flow at low speeds for comfort, while the main rebound valve opens at high speeds for stability.
• Inox-Line Construction: 100% corrosion-resistant stainless steel strut housings offer an unlimited lifespan and prevent seized components.
• Composite Spring Perches: Friction-optimized polyamide perches with stainless steel inserts prevent oxidation and ensure smooth ride height changes over time.
• Vehicle-Specific Engineering: Every damper is dyno-tested and preset to vehicle-specific shock settings developed on the Nurburgring.
• Protection: Elastomer bump stops with integrated dust protection prevent contaminants from reaching the piston rod and seals.
• Manufacturer Part Number: 15251001

Fits select 2019-2025 BMW 330i xDrive, M240i xDrive, and M340i xDrive models (G20 AWD/Sedan) without factory electronic/adaptive damper control.

The KW V2 Inox-Line coilover kit is engineered for drivers seeking more than just a lowered stance. Featuring KW's patented TVR-A (Twin Valve Rebound - Adjustable) technology, these coilovers provide 16 precise clicks of rebound damping adjustment. This allows you to fine-tune the suspension for a firmer, more athletic response or a more compliant ride quality, all while maintaining the factory-preset high-speed compression damping calibrated by KW engineers on the Nurburgring Nordschleife.

Constructed from high-grade "Inox-Line" stainless steel, these struts are built to withstand harsh winter conditions and road salt without corroding. The dirt-resistant trapezoid thread and friction-optimized polyamide composite adjustment collars ensure the ride height remains easily adjustable even after years of use.

• Adjustment Technology: TVR-A (Twin Valve Rebound - Adjustable) with 16 clicks of rebound tuning
• Material: Inox-Line stainless steel strut bodies for permanent corrosion resistance
• Hardware: Wear-resistant polyamide composite spring perches with stainless steel inserts
• Protection: Elastomer bump stops with integrated dust protection systems to shield piston rods and seals
• Performance: Each kit is dyno-tested and hand-assembled in Fichtenberg, Germany
• Part Number: 152200DK

Fits select 2019-2026 BMW 230i, 330i, 430i, M240i, M340i, and M440i (RWD models without EDC).

The KW V2 Inox-Line coilover kit is engineered for drivers who demand individual control over suspension damping without sacrificing longevity. This kit features TVR-A (Twin Valve Rebound - Adjustable) technology, allowing you to fine-tune the rebound characteristics with 16 precise clicks. Whether you prefer a firmer setup for improved body control or a softer setting for long-distance comfort, the two-stage valve system ensures low-speed bypass adjustment while high-speed damping remains pre-configured for safety and stability.

Constructed from high-grade stainless steel, the Inox-Line struts provide permanent corrosion resistance, ensuring the dirt-resistant trapezoid threads and polyamide composite spring perches remain fully adjustable even after years of exposure to the elements. Each kit is vehicle-specifically tuned by KW engineers through rigorous testing on the Nurburgring and their 7-post driving dynamic test center to ensure optimal performance for the BMW G20, G22, and G42 RWD platforms.

• Individualized rebound damping with 16 precise clicks
• TVR-A technology for bypass-controlled low-speed damping
• Inox-Line stainless steel struts for maximum corrosion resistance
• Friction-optimized polyamide composite spring perches with stainless steel inserts
• Height adjustable within an approved lowering range
• Includes elastomer bump stops with integrated dust protection
• Individually dyno-tested and serialized at KW headquarters in Germany
• Manufacturer Part Number: 152200CL

Fits 2001-2006 BMW M3 Base.

The KW V2 Inox-Line coilover kit is engineered for drivers seeking more than just a lowered stance. This system features KW’s TVR-A (Twin Valve Rebound - Adjustable) technology, providing 16 precise clicks of rebound damping adjustment to fine-tune ride comfort and body control. By adjusting the conically shaped low-speed bypass, you can dial in a firmer or more comfortable ride without affecting the factory-optimized compression damping. Each kit is vehicle-specifically tuned through comprehensive testing on the Nurburgring Nordschleife and KW’s 7-post Driving Dynamic Test Center.

• 16 clicks of adjustable rebound damping via TVR-A technology
• Inox-Line stainless steel strut housings for permanent corrosion resistance
• Dirt-resistant trapezoid threads and composite spring perches for easy height adjustment
• Elastomer bump stops with integrated dust protection for long-term seal durability
• Dyno-tested for accuracy and preset to manufacturer-recommended settings
• Hand-built in Fichtenberg, Germany, with individual serial numbering
• Manufacturer Part Number: 15220023