Fits 2014-2019 Chevrolet Corvette Stingray and Grand Sport models equipped with the V8-6.2L engine.

Boost the performance and sound of your C7 Corvette with the aFe POWER Magnum FORCE Stage-2 Cold Air Intake. This system replaces the restrictive factory air box with a high-flow, open-element XLPE (cross-linked polyethylene) polymer housing. Designed to resist heat soak and maximize durability, the housing integrates a patent-pending filter-to-housing interface that simplifies installation by using fewer parts than traditional intake kits. The system features a dyno-tuned, computer-designed intake tube with a resonance chamber to reduce unwanted drone while maintaining an aggressive induction sound under load.

At the heart of this system is the Pro DRY S air filter. This 7-inch tall, 360-degree radial flow filter uses three layers of oil-free synthetic media, providing maximum convenience for street-driven vehicles. It delivers a 26% increase in airflow over the factory assembly, measured at 610 CFM @ 7" H2O, resulting in dyno-proven gains of up to +13 horsepower and +12 lb-ft of torque.

• Filter Media: Oil-free Pro DRY S synthetic media for easy maintenance and high filtration efficiency.
• Construction: Heat-resistant XLPE housing and intake tube with billet aluminum vacuum line fittings.
• Performance: Outflows factory intake by 26%; provides 610 CFM at 7" H2O.
• Ease of Install: Direct bolt-on design utilizes factory mounting points; no cutting or modifications required.
• Kit Includes: Stainless steel clamps, flexible bellows coupling, and all necessary hardware.
• MPN: 54-13041D

Fits select 1999-2007 Cadillac Escalade, Chevrolet Silverado, Suburban, Tahoe, Avalanche, and GMC Sierra, Yukon models (5.3L).

The aFe MagnumFORCE Stage-2 Cold Air Intake System is engineered to replace the restrictive factory air box and intake tract on GMT800-platform GM trucks and SUVs. This system utilizes a precision-molded, heat-insulating rotomolded plastic intake tube to maximize airflow volume and velocity for improved throttle response. By utilizing a one-piece 16-gauge powder-coated heat shield, the system isolates the air filter from engine bay heat, ensuring a cooler, denser air charge reaching the intake.

Included in this kit is the high-performance Pro 5R air filter. This 360-degree radial flow filter features five layers of progressively finer medical-grade cotton gauze media, providing maximum airflow and filtration. The filter is washable and reusable for the life of the vehicle. Installation is a straightforward bolt-on process using factory mounting points with no cutting or drilling required.

• Manufacturer Part Number: 54-10092
• Flow Gain: 77% CFM increase over factory intake
• Filter Media: Pro 5R (5-layer oiled cotton gauze)
• Tube Material: Heat-resistant rotomolded plastic
• Heat Shield: 16-gauge powder-coated steel
• Warranty: 2-Year Limited Warranty

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD (V8-6.6L LML diesel).

The aFe Power Momentum HD Pro DRY S Stage 2 intake system is engineered to provide significant performance gains and superior engine protection for your Duramax diesel. This system utilizes a unique, patent-pending filter-to-housing interface that allows for a larger filter size, increasing available air volume while simplifying the installation process. The CAD-designed, roto-molded intake tube and one-piece sealed housing work together to deliver a 52% increase in airflow over the factory intake, resulting in measured gains of up to +22 horsepower and +57 lbs. x ft. of torque.

At the heart of this system is the Pro DRY S 360-degree radial flow air filter. It features three layers of progressive synthetic media that achieve a 99.2% cumulative efficiency rating, providing maximum convenience with no oils required for servicing. The filter is reinforced with an external metal wrap to prevent collapse under high-load conditions. The high-quality housing also features a built-in auxiliary air inlet to pull in additional cool air for the intake system.

• Outflows factory intake by 52% for improved throttle response
• Max gains of +22 HP and +57 lbs. x ft. of torque
• One-piece sealed housing with integrated auxiliary air inlet
• Patent-pending filter-to-housing interface for easy servicing
• Pro DRY S 3-layer oil-free synthetic media with 99.2% efficiency
• Reinforced metal filter mesh for maximum structural strength
• No cutting or drilling on factory parts required
• Manufacturer Part Number: 51-74006-1

Fits select 2015-2026 Audi A3, A3 Quattro, S3, and Volkswagen Golf, Golf R, GTI, and Jetta GLI.

The aFe Power Momentum GT cold air intake system is engineered to optimize airflow and heat resistance for MQB-platform vehicles. This system features a unique one-piece, sealed housing made from heat-resistant cross-linked polyethylene (XLPE), which houses a massive 7-1/2” tall 360-degree radial flow air filter. The integrated clear sight window allows for quick filter inspection without dismantling the assembly, while the auxiliary air inlet provides additional airflow options.

At the heart of this system is the Pro DRY S media, an oil-free, three-layer synthetic air filter that balances high filtration efficiency with maximum convenience for street use. The computer-designed, dyno-tuned intake tube is crafted from durable XLPE to prevent heat soak and ensure precise fitment to factory mounting locations, utilizing fewer parts for a straightforward installation.

• Maximum Airflow: 7-1/2" tall radial flow filter with 3-1/2" flange and inverted top for increased surface area and longer service intervals.
• Oil-Free Convenience: Three-layer Pro DRY S synthetic media is washable and reusable, requiring no recharge oil for easier maintenance.
• Durable Construction: One-piece XLPE housing and intake tube offer superior heat-soak resistance and structural integrity.
• Premium Hardware: Includes stainless-steel clamps and a high-quality silicone coupling for a secure, leak-free installation.
• Hassle-Free Maintenance: Built-in clear sight window allows for convenient filter inspection without disassembling the intake system.
• Manufacturer Part Number: 50-70036D

Fits 2018-2021 Jeep Grand Cherokee Trackhawk and 2021-2023 Dodge Durango SRT Hellcat (6.2L).

Upgrade your supercharged HEMI with the CORSA Performance carbon fiber cold air intake, engineered for maximum airflow and superior heat management. This system features an oversized, dual-layer carbon fiber air duct and a vehicle-specific heat shield designed to integrate seamlessly with the factory hood air passage and grille. By streamlining air delivery and shielding the intake from ambient engine bay heat, this system provides your 6.2L V8 with the massive volume of cool, dense air required for peak performance.

The optimized intake geometry and high-performance MaxFlow 5 oiled filtration not only increase horsepower but also enhance the signature supercharger whine, providing a more connected driving experience. Dyno-tuned for precision results, this intake unlocks proven power gains while maintaining an high-end aesthetic under the hood.

• Unlocks gains of up to 14 HP and 13 lb-ft of torque
• Oversized dual-layer carbon fiber duct for weight savings and thermal resistance
• Engineered heat shield funnels water and debris away from the filter element
• Includes MaxFlow 5 reusable oiled cotton gauze air filter
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 44011
• Limited Lifetime Warranty (1-year warranty on filter)

Fits 2006 Pontiac GTO (V8-6.0L).

The K&N 63-3053 AirCharger Performance Intake system is engineered to reduce air path restriction by replacing the factory air filter and intake housing. This system features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to increase the volume of airflow to your engine. It is paired with an oversized, conical High-Flow Air Filter featuring oiled cotton media that can go up to 100,000 miles between services under normal highway driving conditions.

Included is a custom heat shield to help isolate the intake air from high engine bay temperatures, ensuring a cooler, denser charge. The entire system bolts directly to factory mounting points and can typically be installed in under 90 minutes using basic hand tools.

• Rotationally-molded HDPE intake tube for maximum air volume
• Washable and reusable oiled cotton filter media
• Custom heat shield blocks engine bay heat
• Up to 100,000 miles between filter services
• Easy bolt-on installation requires no permanent modifications
• Manufacturer Part Number: 63-3053

Upgrade your vehicle's breathing with the Injen SP Series Dual Short Ram Intake, specifically engineered for the 3.7L V6 engine. Fits 2014-2015 Infiniti Q50 Base, Premium, and Sport models.

This high-performance intake system features dual mandrel-bent 6061-T6 aluminum tubes designed to replace restrictive factory air boxes with a smooth, high-velocity airflow path. Utilizing Injen's patented MegaRam (MR) and Air Fusion technologies, this system is precision-tuned to optimize the air/fuel ratio for safe, reliable power. Dyno testing has shown gains of up to 12 horsepower and 8 lb-ft of torque.

The SP1999P kit includes two custom-designed heat shields to block radiant engine heat, ensuring a cooler intake charge. It comes equipped with dual SuperNano-Web dry air filters (Part # X-1063-BB), providing exceptional filtration efficiency and airflow without the mess of oiling. This is a direct bolt-on system that requires no additional tuning for operation.

• Direct fit for 2014-2015 Infiniti Q50 3.7L (All Trims)
• Mandrel-bent 6061-T6 aluminum construction in a polished finish
• Patented MegaRam (MR) and Air Fusion tuning technology
• Includes two custom application-specific heat shields
• Equipped with SuperNano-Web dry air filters
• Dyno-proven gains of +12 HP and +8 lb-ft torque
• Limited Lifetime Warranty
• Made in Pomona, California, USA
• MPN: SP1999P

Notice: This product is not currently CARB exempt and is not legal for purchase or use in California or on vehicles registered with the California DMV.

Fits 2002-2004 Toyota Corolla CE, LE, and S models (1.8L).

Boost engine efficiency and performance with the Injen Technology RD Series Cold Air Intake. Engineered to replace restrictive factory intake components, this system uses mandrel-bent 6061-T6 aluminum tubing to provide a smooth, uninterrupted path for high-velocity airflow. By positioning the filter deeper in the engine bay to capture cooler, denser air, the RD2081P delivers measurable power gains while maintaining safe air-fuel ratios without the need for additional tuning.

This system features Injen's proprietary SuperNano-Web dry air filter, which offers superior filtration and increased surface area for maximum flow. This dry media filter is fully serviceable and requires no oiling, making maintenance simple and clean. Hand-crafted in Pomona, California, this intake provides a deeper, more aggressive engine tone under throttle and includes a polished finish for improved engine bay aesthetics.

• 6061-T6 mandrel-bent aluminum intake tubing for maximum flow
• Polished finish for corrosion resistance and visual appeal
• SuperNano-Web dry air filter (Part# X-1010-BB) requires no oiling
• CARB EO #: D-476-8 for emissions compliance
• Compatible with optional hydroshield (Part# 1035BLK or 1035RED)
• Injen Technology Limited Lifetime Warranty
• MPN: RD2081P
• Made in the USA

Fits 2001-2003 Acura CL Type-S and 2002-2003 Acura TL Type-S (Note: Will not fit 2003 models equipped with a Manual Transmission).

The Injen RD Series Performance Cold Air Intake is engineered to deliver significant power gains and improved throttle response by drawing cool, dense air from outside the engine bay. The heart of this system is the mandrel-bent 6061-T6 aluminum intake tube, which provides a smooth, unrestricted path for airflow directly to the engine. This design ensures that safe air/fuel (A/F) ratios are maintained throughout the powerband without the need for additional tuning.

Equipped with Injen’s SuperNano-Web dry air filter, this intake offers high-capacity filtration and maximum airflow in a fully serviceable, oil-free design. Manufactured in Pomona, California, the RD Series provides an aggressive, throaty engine tone under full throttle and is finished in a high-luster polished aluminum for enhanced engine bay aesthetics.

• Dyno-proven gains of up to 10 HP and 8 lb-ft of torque
• Precision mandrel-bent 6061-T6 aluminum construction
• Includes SuperNano-Web dry air filter (Replacement Part #X-1014-BB)
• CARB EO Number: D-476-5 (Street legal in 50 states)
• Compatible with optional Hydroshield (Part #1033BLK or 1033RED)
• Manufacturer Part Number: RD1481P
• Injen Technology Limited Lifetime Warranty
• Made in the USA

Fits 1997-1999 Toyota Camry CE, LE, and XLE (L4-2.2L).

The Injen Technology IS Series Performance short ram air intake is a precision-engineered upgrade designed to deliver immediate bolt-on power and a more aggressive engine tone. Built around a mandrel-bent T6-6061 aluminum intake tube, this system streamlines airflow by removing the restrictive factory ducting. Injen's engineering team ensures safe air-to-fuel (A/F) ratios are maintained throughout the powerband, providing reliable performance without the need for additional tuning.

This kit features the Injen SuperNano-Web dry air filter, which offers superior filtration and increased surface area for maximum air volume. Because it is a dry media filter, it is fully serviceable and requires no oiling. Proudly manufactured in Pomona, California, this system is finished in a durable black powder coat and is backed by a limited lifetime warranty.

• 6061-T6 mandrel-bent aluminum intake tubing for maximum flow
• Includes SuperNano-Web dry air filter (X-1012-BB)
• CARB EO #: D-476-3 (Emissions legal in select states)
• Aggressive induction sound under full throttle
• Direct bolt-on installation with no tuning required
• Replacement filter: X-1012-BB | Optional hydroshield: 1033BLK / 1033RED
• Made in the USA
• Manufacturer Part Number: IS2020BLK

Fits 1991-1999 Mitsubishi 3000GT Base, SL, and VR-4 (V6-3.0L).

The Injen Technology IS Series Performance short ram air intake is engineered to provide a direct-fit performance upgrade for the Mitsubishi 3000GT. This system utilizes T6-6061 mandrel-bent aluminum tubing to provide a smooth, unrestricted airflow path to the engine while maintaining safe air-fuel (A/F) ratios across the powerband without the need for additional tuning.

This kit includes the high-performance Injen SuperNano-Web dry air filter, which offers increased surface area for superior filtration and airflow. The IS Series intake delivers a deep, aggressive engine tone under full throttle and features a durable black powder-coated finish for long-lasting engine bay aesthetics.

• Dyno-proven gains of up to 6 hp and 7.8 lb-ft of torque
• Mandrel-bent T6-6061 aluminum tubing eliminates airflow restrictions
• Includes fully serviceable Injen SuperNano-Web dry air filter (MPN: X-1018-BB)
• CARB EO #: D-476-5
• Compatible with optional Hydroshield (Part No. 1034BLK or 1034RED)
• Made in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty

Fits 2003-2004 Hyundai Tiburon GT models. Improve your engine's breathing and throttle response with the Injen Technology IS Performance short ram air intake. This system replaces the restrictive factory air box with a mandrel-bent T6-6061 aluminum intake tube, designed to provide a smooth, uninterrupted path for high-velocity airflow directly into the engine.

The IS1375P is engineered to deliver significant performance increases without compromising safety, maintaining proper air/fuel (A/F) ratios throughout the powerband without requiring a custom tune. On the dyno, this system has shown gains of up to 18.1 horsepower and 18 lb-ft of torque. The included Injen SuperNano-Web dry air filter offers increased surface area for maximum flow and superior filtration, and it is fully serviceable for long-term use.

• Direct bolt-on performance for 2003-2004 Hyundai Tiburon GT
• Dyno-proven gains of up to 18.1 HP and 18 lb-ft of torque
• Mandrel-bent T6-6061 aluminum tubing with a polished finish
• SuperNano-Web dry air filter (Part #X-1017-BB) requires no oil
• Maintains safe factory air/fuel ratios
• Aggressive engine tone under acceleration
• CARB EO #: D-476-4
• Includes all necessary hardware for installation
• Manufacturer Part Number: IS1375P
• Handcrafted in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty

Fits 2019-2022 Hyundai Veloster N Base (2.0L).

The Injen Evolution EVO1300 cold air intake system is a high-performance induction upgrade specifically engineered for the turbocharged 2.0L Veloster N. Constructed from high-strength XLPE roto-molded polyethylene, the airbox is designed to integrate seamlessly with the OE inlet scoop, capturing the maximum volume of cool ambient air for improved combustion. The system utilizes Injen's patented Twist-Lock technology to mount a massive 4.00" I.D. SuperNano-Web dry air filter, maximizing surface area and airflow without the need for additional clamps or hardware.

Dyno-proven to deliver gains of up to 10 hp and 9 lb-ft of torque, this system is designed to work with the factory ECU calibration and provides an aggressive intake growl under acceleration. Installation is a straightforward bolt-on process that can typically be completed in 20 minutes using basic hand tools. The kit includes reinforced automotive-grade silicone couplers and stainless steel band clamps with protective inner liners for a secure, durable fit.

• One-piece XLPE roto-molded airbox with integrated intake scoop
• Fully serviceable 4.00" I.D. SuperNano-Web dry air filter (Replacement Part # X-1108-BB)
• Patented Twist-Lock filter attachment for simplified installation
• Dyno-tested gains of up to 10 hp and 9 lb-ft of torque
• Stainless steel hardware and reinforced silicone couplers included
• Manufactured in Pomona, California, USA
• Injen Technology Limited Lifetime Warranty

Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California DMV.

Fits 2018-2021 Jeep Grand Cherokee Trackhawk and 2021-2024 Dodge Durango SRT Hellcat (6.2L).

The CORSA Performance matte forged carbon fiber cold air intake is engineered for high-performance HEMI applications, matching the aesthetics of premium optional forged carbon trim packages. This system features an oversized, dual-layer carbon fiber air duct and a specialized heat shield designed to streamline air delivery from the factory hood passage and grille while shielding the intake from engine heat. The shield's geometry is specifically tuned to funnel water and debris away from the filter element, ensuring a clean, cool charge for the supercharger.

This system (MPN 44011D-MF) is dyno-tuned to unlock an additional 14HP and 13 lb-ft of torque from the 6.2L supercharged V8 while enhancing supercharger whine. Installation is straightforward, typically requiring less than one hour with no aftermarket tuning required.

• Dyno-proven gains of up to 14HP and 13 lb-ft of torque
• Matte forged, dual-layer carbon fiber oversized air duct
• Full carbon fiber heat shield protects against heat soak and debris
• Includes low-maintenance DryTech 3D synthetic, no-oil, high-flow air filter
• Premium multi-ply silicone hoses and T-bolt style hose clamps included
• Manufacturer Part Number: 44011D-MF
• Limited Lifetime Warranty (1-year warranty on filter)

Fits 2018-2023 Ford Mustang GT (5.0L).

The CORSA Performance Cold Air Intake System is engineered to maximize airflow while providing superior engine protection. This system replaces the restrictive factory airbox with a high-flow design that outflows stock units, delivering measurable performance improvements for your S550 Mustang. It features a specialized smoked acrylic airbox lid, allowing for easy visual inspection of the filter while shielding it from engine bay heat and debris.

This intake is equipped with CORSA's DryTech 3D filtration technology. This high-flow, non-oiled synthetic filter provides nearly 98% efficiency and requires minimal maintenance—simply vacuum the surface or rinse with soap and water. With service intervals up to 50,000 miles, it offers a long-lasting, low-hassle solution for both daily driving and performance applications.

• DryTech 3D high-flow, no-oil synthetic filter
• Smoked acrylic see-through airbox lid for easy inspection
• Engineered to outflow stock air intake systems
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 419850D
• Limited Lifetime Warranty
• Made in the USA

Fits 2019-2021 Jeep Grand Cherokee Trackhawk and 2021, 2023-2024 Dodge Durango SRT Hellcat (6.2L).

Engineered for high-performance supercharged applications, the aFe POWER Track Series cold air intake system delivers a significant 30% increase in airflow over the factory setup. This system features a 100% twill weave carbon fiber intake tube that is computer-designed for maximum power gains and a precise fit without the use of fiberglass. The intake utilizes a massive 7-inch tall, 360-degree radial flow Pro 5R air filter, constructed with five layers of progressively finer cotton gauze media for maximum filtration and performance.

To maintain intake charge density, the system uses an open-element XLPE (cross-linked polyethylene) polymer housing that shields the filter from engine bay heat while providing an aggressive supercharger whine. The design incorporates a patent-pending filter-to-housing interface that reduces part count for a simplified installation. Crucially, the system is designed to accept the factory Multi-Air Unit Actuator (MUA), ensuring proper crankcase flow and preventing check engine lights.

• Dyno-proven gains of up to +36 HP and +35 lbs. x ft. TQ
• Measured flow: 780 CFM @ 7" H2O
• Outflows factory intake by 30%
• Pro 5R media: Five layers of pre-oiled cotton gauze for maximum performance
• 100% twill weave carbon fiber tube for lightweight durability
• Heat-resistant XLPE open-element housing with multiple air inlets
• Direct-fit installation using factory mounting points
• Includes stainless-steel clamps and silicone coupling
• Manufacturer Part Number: 57-10009R

Note: For Dodge Durango SRT Hellcat models, the air filter sits directly beneath the hood vent. aFe POWER recommends using pre-filter 28-10303 and avoiding pressure washing near the vent.

Fits 2014-2018 Mazda 3 (L4-2.0L).

Upgrade your Mazda 3's breathing with the aFe Takeda Stage-2 Cold Air Intake System. This system features a high-quality, one-piece XLPE (cross-linked polyethylene) polymer housing designed to minimize heat soak and resist engine bay temperatures. The open-element design allows for easy inspection of the massive Pro 5R air filter while creating a tight, heat-blocking seal against the hood when closed. This intake is engineered to utilize the factory air inlet and includes an optional auxiliary air inlet to pull in additional cool air from the front of the vehicle under load.

• Performance Gains: Delivers an estimated +9 HP and +8 lbs. x ft. of torque.
• Increased Airflow: Outflows the factory intake system by 71% with a measured flow of 325 CFM @ 7" H2O.
• Pro 5R Filtration: Features a 5-layer washable and reusable oiled cotton gauze media for maximum airflow and high filtration efficiency.
• Direct Bolt-On: Utilizes factory mounting points and OE air inlet with no additional hardware required for a straightforward installation.
• Durable Housing: Heat-resistant black XLPE housing includes an optional plug for the auxiliary inlet.
• Manufacturer Part Number: 56-10020R

Upgrade your vehicle's breathing and thermal efficiency with the aFe Takeda Stage-2 Cold Air Intake System. This direct-fit system fits 2016-2021 Honda Civic models (2.0L) and is designed to outflow the factory intake by 14% while delivering gains of up to +5 horsepower and +6 lb-ft of torque.

The system features a massive, oil-free Pro DRY S air filter with three layers of synthetic media, providing maximum convenience and filtration for street use. The 360-degree radial flow filter is housed in an open-element XLPE (cross-linked polyethylene) polymer housing that uses the hood as a heat-blocking seal. This design captures cold air directly from the factory scoop while allowing for easy filter inspection. The intake is finished with a computer-designed, dyno-tuned XLPE tube to ensure smooth airflow and resistance to engine bay heat soak.

• Increased Flow: Measured flow of 250 CFM @ 7 in. H2O
• Pro DRY S Media: 3.5-inch flange, 3-layer oil-free synthetic media for easy maintenance
• Precision Engineering: Dyno-tuned XLPE intake tube maintains optimal air velocity
• Durable Housing: Heat-resistant XLPE polymer prevents performance-robbing heat soak
• Easy Installation: Bolts to factory mounting points with no cutting or modifications required
• MPN: 56-10007D

Fits select 2012-2016 Porsche 911 models (3.8L) including Carrera, Targa, Turbo, and GT3 variants.

Maximize the performance of your 991-chassis Porsche 911 with the aFe POWER MagnumFORCE Stage-2Si intake system. This dual-filter system is engineered to optimize airflow while maintaining a factory-clean look. The housing is constructed from heat-resistant, cross-linked polyethylene (XLPE) and features a vacuum-formed removable cover that seals the system against engine bay heat. This design utilizes factory OE air inlets and mounting locations for a direct bolt-on installation that requires no drilling or cutting.

The system features dual 360-degree radial flow air filters utilizing aFe's Pro DRY S media. This three-layer oil-free synthetic media provides maximum convenience and filtration efficiency for street use, with inverted tops for increased surface area and longer service intervals. Combined with a computer-designed, dyno-tuned intake tube, this system is measured at 580 CFM at 7" H2O, outflowing the factory intake by 7%.

• Dyno-proven gains of up to +15 HP and +13 lbs. x ft. Torque
• Dual Pro DRY S oil-free air filters for maximum convenience and filtration
• Durable, heat-soak resistant XLPE housing and intake tubes
• Measured flow: 580 CFM @ 7" H2O
• Includes custom laser-etched stainless steel hardware
• Manufacturer Part Number: 54-83037D

Note: This system does not currently fit vehicles equipped with the 2020 Porsche heat shield recall update.

Fits 2015-2020 Ford F-150 and Raptor (V6-2.7L / V6-3.5L / V8-5.0L).

The aFe POWER Quantum Dynamic Air Scoop (D.A.S.) is designed to bridge the gap between your intake system and the front of the vehicle, capturing the coolest ambient air from the top of the grille. By forcing a higher volume of fresh air into the intake tract, this scoop reduces intake air temperatures and increases air velocity for improved throttle response and efficiency.

• Durable Construction: Rotomolded from red, high-quality linear low-density polyethylene (LLDPE) that is impact-resistant and 100% recyclable.
• Snap-In Installation: Engineered for a hassle-free fit that snaps directly into the air box with no cutting or drilling required.
• Broad Compatibility: Fits factory intake systems as well as aFe POWER Quantum and Magnum FORCE Stage-2 intake systems.
• Important Fitment Note: This component is NOT compatible with aFe POWER Momentum intake systems.
• MPN: 53-10008SR

Fits 2020-2026 Ford Explorer and Lincoln Aviator models (V6-3.0L).

The aFe Power Momentum GT cold air intake system is engineered to provide maximum airflow and protection for your twin-turbocharged V6. This system features a unique, heat-resistant red XLPE (cross-linked polyethylene) sealed housing that minimizes heat soak while protecting the intake charge from engine bay temperatures. The computer-designed, dyno-tuned intake tubes ensure maximum power gains and a precision fit that retains factory vacuum line locations.

• Pro 5R Performance Media: Equipped with dual 6-inch tall 360-degree radial flow filters featuring pre-oiled Black Pro 5R media. Five layers of progressively finer cotton gauze provide the highest possible airflow for street and track performance.
• Innovative Housing Design: The one-piece sealed housing utilizes a patent-pending filter-to-housing interface, allowing for a larger air filter and a simplified installation with fewer parts.
• Hassle-Free Maintenance: A clear sight window built into the housing allows for quick filter inspections without tools. The filters use an inverted bullet-style top to increase surface area, extending service intervals.
• Premium Hardware: Includes high-quality stainless-steel worm-gear clamps, durable silicone couplings, and CNC-machined aluminum and nylon vacuum fittings for a secure, factory-style finish.
• MPN: 50-70076KR

Fits 2010-2013 Volkswagen GTI Base (2.0L).

The Injen SP Series short ram intake system (SP3075BLK) is engineered to optimize airflow for the VW MK6 GTI. Constructed from mandrel-bent 6061-T6 aluminum, this system replaces the restrictive factory airbox with a smooth-bore intake tube and a custom-designed heat shield with cover. The system utilizes Injen's patented MegaRam (MR) and Air Fusion technologies to tune the intake tract, ensuring maximum power gains while maintaining safe air-fuel ratios across the power band.

• Dyno-proven gains of up to 7 hp and 6 lb-ft of torque
• Mandrel-bent 6061-T6 aluminum intake tubing with a durable black finish
• Includes a fully serviceable SuperNano-Web dry air filter (Part # X-1049-BB)
• Custom-designed heat shield provides a barrier against engine bay heat soak
• CARB EO # D-476-8 (Applies to 2010-2011 model years only; excludes SULEV test groups AADXV02.03PA, BADXV02.03PA, and CADXV02.03PA)
• Maintains safe Air/Fuel ratios without the need for additional tuning
• Aggressive engine tone under full throttle conditions
• Made in Pomona, California, USA
• Compatible with optional hydroshield (Part # 1031BLK)

Fits 2007-2021 Toyota Tundra models equipped with the 5.7L V8 engine.

The Injen PowerFlow (PF) intake system is engineered for truck enthusiasts seeking dyno-proven performance without compromising factory drivability. Constructed from mandrel-bent 6061-T6 aluminum, this system replaces the restrictive factory airbox with a high-flow, polished intake tube designed to optimize air velocity. Featuring Injen's patented Air Fusion Technology, the PF2020P stabilizes airflow to maintain safe air/fuel ratios, delivering gains of up to 10 horsepower and 11 lb-ft of torque without requiring an ECU reflash or additional tuning.

This kit includes a fully serviceable Injen SuperNano-Web dry air filter, providing superior filtration and airflow while eliminating the need for filter oils. The intake is designed for a direct-fit, bolt-on installation using factory mounting points and includes all necessary hardware for a seamless upgrade.

• Direct Fit: Replaces OEM intake assembly on 2007-2021 5.7L Tundra models.
• Construction: Mandrel-bent 6061-T6 aluminum with a polished finish.
• Filter Tech: SuperNano-Web dry filter (Replacement part X-1021-BB).
• Performance: Dyno-tested gains of up to 10 hp and 11 lb-ft of torque.
• Technology: Patented Air Fusion Technology for optimal MAF sensor calibration.
• Warranty: Injen Technology Limited Lifetime Warranty.
• Manufacturer Part Number: PF2020P

Note: This product is not CARB exempt and is not available for sale or use in California.

Fits select 2020-2026 Ford F-250 and F-350 Super Duty trucks (V8-6.7L).

The aFe Power Momentum GT Pro 5R Intake System is engineered to provide your Ford Super Duty with maximum airflow and superior heat resistance. At its core is a 9-inch tall, 360-degree radial flow air filter featuring five layers of progressively finer cotton gauze media. This pre-oiled Pro 5R media is designed for street and track use, utilizing an inverted top to increase filter surface area and extend service intervals for long-term performance.

The system features a durable, open-element XLPE (cross-linked polyethylene) housing that shields the filter while allowing for easy visual inspections and a more aggressive intake sound. The dyno-tuned intake tube is computer-designed to optimize airflow and ensure a perfect fit. Constructed from heat-resistant XLPE, the tube and housing resist heat soak in demanding engine bay conditions while utilizing factory mounting locations for a direct bolt-on installation.

• 9-inch tall Pro 5R air filter with 5-inch flange and 5-layer oiled cotton media
• High-temperature XLPE housing and intake tube resist heat soak and maintain durability
• Open-element design provides aggressive intake sound and easy filter monitoring
• Direct bolt-on installation requires no cutting or drilling
• Includes premium stainless-steel clamps and flexible silicone couplings
• Manufacturer Part Number: 54-13070R

Fits 2006-2013 Chevrolet Corvette Z06 (V8-7.0L).

Optimize your C6 Corvette's airflow with the aFe Power Magnum FORCE Stage-2 Pro 5R Cold Air Intake System. This system replaces the restrictive factory airbox with a precision-designed, rotomolded plastic intake tube that maximizes air volume and velocity into the LS7 engine for improved throttle response and performance gains.

The included 16-gauge powder-coated heat shield is a one-piece design that installs without cutting or drilling. To maintain low intake temperatures, the system features a specialized cover that blocks engine heat while directing cooler ambient air toward the filter. The heart of the system is the 360-degree Pro 5R air filter, featuring five layers of washable, reusable oiled media for maximum flow and protection.

• Pro 5R Filter: 5-layer progressive oiled cotton gauze media for maximum airflow and filtration efficiency.
• Rotomolded Intake Tube: Smooth-walled plastic construction reduces turbulence and resists heat soak.
• One-Piece Heat Shield: Durable 16-gauge powder-coated steel mounts to factory locations.
• Hassle-Free Install: Bolts directly to the vehicle with no permanent modifications required.
• Manufacturer Part Number: 54-12732
• Warranty: 2-Year Limited Warranty

Fits select 2020-2023 Jeep Wrangler and Gladiator models (V6-3.0L).

Maximize the performance of your EcoDiesel with the aFe POWER Rapid Induction Cold Air Intake System. This system is designed to outflow the factory intake by 19%, delivering a measured flow of 380 CFM at 7" H2O. By replacing the restrictive factory upper intake box with a custom-designed, dyno-tuned XLPE intake tube and a high-flow filter, this kit reduces turbulence and heat soak for consistent power gains.

The system features an 18-gauge steel heat shield finished in wrinkle-black powder coating. It mounts directly to the lower half of your factory airbox, ensuring a simple, bolt-on installation using factory mounting locations. The included Pro 5R air filter uses five layers of progressively finer pre-oiled cotton gauze media to provide maximum airflow and filtration efficiency, and is fully washable and reusable for the life of the vehicle.

• Increased Airflow: Outflows factory intake by 19% with 380 CFM @ 7" H2O.
• Pro 5R Filter: 5-layer pre-oiled cotton gauze media for maximum street and track performance.
• Durable Construction: Heat-resistant XLPE (cross-linked polyethylene) intake tube and 18-gauge steel heat shield.
• Complete Kit: Includes premium silicone coupler and stainless steel worm-gear clamps.
• Easy Installation: Replaces factory upper airbox; no drilling or cutting required.
• Manufacturer Part Number: 52-10005R

Fits 2025 Jeep Wrangler models equipped with the L4-2.0L engine, including 4xe Hybrid and standard internal combustion trims.

The K&N 63 Series AirCharger intake system replaces your Jeep's restrictive factory air filter and intake housing with a high-performance induction setup. This system features a rotationally molded high-density polyethylene (HDPE) intake tube designed to increase the volume of airflow to your engine. By streamlining the air path, this intake is guaranteed to provide an increase of 19.24 horsepower and 25.47 lb-ft of torque without requiring an ECU tune.

This kit includes an oversized, conical High-Flow Air Filter featuring oiled cotton media. The washable, reusable filter is engineered to go up to 100,000 miles between services under normal highway driving conditions. A custom-designed enclosed air box is also included to isolate the filter from high engine bay temperatures, ensuring a cooler, denser oxygen charge for better combustion. The entire system is designed for a straightforward installation that can typically be completed in under 60 minutes using basic hand tools.

• Manufacturer Part Number: 63-1597
• Horsepower Gain: 19.24 HP @ 5013 RPM
• Torque Gain: 25.47 lb-ft @ 3474 RPM
• Intake Tube Material: Black High-Density Polyethylene
• Filter Media: Oiled Cotton Gauze (Red)
• Service Interval: Up to 100,000 miles
• Warranty: No-Hassle Lifetime Limited Warranty

Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the 6.6L L5P Duramax diesel engine.

The WCFab High Flow Intake Bundle Kit is a comprehensive Stage 1 cooling system upgrade designed to eliminate the restrictive and failure-prone factory plumbing between the turbo and the engine. By replacing the undersized OE plastic and rubber components with high-flow aluminum piping, this kit improves throttle response, turbo spool-up, and overall engine efficiency. The 3-inch hot-side pipe replaces the restrictive 2.5-inch factory unit and deletes the resonator for smoother airflow, while the 3.5-inch cold-side pipe replaces the weak plastic OE pipe known for boost leaks and failures under load.

Each component is manufactured in the USA from heavy-duty 14-gauge aluminum tubing featuring mandrel bends for maximum flow. The cold-side pipe utilizes a CNC-machined flange with a double o-ring seal, replacing the factory clip-ring design at the Y-bridge for a superior, leak-free connection capable of holding significantly higher boost pressures. This bolt-on kit requires no tuning and is compatible with stock trucks.

• 3-inch diameter Driver Side (Hot Side) Intercooler Pipe
• 3.5-inch diameter Passenger Side (Cold Side) Intercooler Pipe
• Heavy-duty 14-gauge aluminum construction with mandrel bends
• CNC-machined flange with double o-ring seals
• Reinforced silicone boots and stainless steel T-bolt clamps
• Custom Gloss White powder coat finish
• Retains all factory connection points and sensors
• Manufacturer Part Number: WCF100410-GW

Includes: Hot-side and cold-side intercooler pipes, silicone boots, stainless steel T-bolt clamps, o-rings, and intercooler outlet clip.

Fits select 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the 6.6L L5P Duramax diesel engine.

The WCFab High Flow Intake Bundle is a Stage 1 performance upgrade designed to eliminate restrictive factory components and common failure points in the L5P Duramax charging system. This kit replaces the narrow, multi-piece OEM intercooler plumbing with heavy-duty, one-piece mandrel-bent aluminum piping. By increasing the hot side to 3 inches and the cold side to 3.5 inches, this bundle reduces turbulence and improves airflow between the turbo and the engine for better throttle response and more efficient turbo spooling.

Engineered for durability under high-boost conditions, the driver-side (hot) pipe removes the failure-prone OEM resonator and middle boot joint. The passenger-side (cold) pipe features a CNC-machined flange with a double O-ring seal, replacing the factory plastic and rubber assembly that often leaks or fails under load. Finished in a signature Candy Teal powder coat, this bolt-on kit requires no ECU tuning and retains all factory sensor connection points.

• 3 in. Driver Side (Hot) Intercooler Pipe (14-gauge aluminum)
• 3.5 in. Passenger Side (Cold) Intercooler Pipe (14-gauge aluminum)
• CNC-machined flange with double O-ring seal for leak-free performance
• Heavy-duty reinforced silicone boots and stainless steel T-bolt clamps
• Mandrel-bent construction for optimized airflow
• Retains factory sensors and connection points
• No tuning required; compatible with stock vehicles
• Made in the USA
• Manufacturer Part Number: WCF100410-CT

Fits 2019-2023 Ram 1500 models equipped with the 5.7L engine. This CORSA Performance Cold Air Intake (MPN 46557-1) is engineered to maximize airflow and optimize engine performance. By replacing the restrictive factory induction system, this intake improves flow while providing superior engine protection. It features a MaxFlow 5 oiled filter, constructed with five layers of high-quality cotton gauze pleated between durable aluminum screens to ensure maximum air volume and long service intervals.

• MaxFlow 5 oiled filter provides high flow rates and up to 40,000 miles between cleanings.
• Rugged airbox design protects the filter from heat and environmental debris.
• Integrated smoked acrylic see-through lid allows for quick filter inspections.
• Direct bolt-on installation requires no permanent modifications and installs in under an hour.
• Proudly manufactured in the USA.
• Backed by a manufacturer's Lifetime Warranty.

Each kit includes the high-flow airbox, MaxFlow 5 oiled filter, smoked acrylic lid, and all necessary hardware for a complete installation.