Fits 2019-2023 Ram 1500 models including Big Horn, Laramie, Limited, Rebel, and Tradesman (5.7L V8).

Designed to optimize airflow and engine protection, the CORSA Performance Cold Air Intake replaces the restrictive factory system with a high-flow induction solution. This system features Donaldson PowerCore Ultra-Web filtration technology, providing 99.96% efficiency and an industry-leading maintenance-free interval of up to 150,000 miles. The rugged airbox construction is engineered to shield the filter from engine heat and environmental debris, while the smoked acrylic see-through lid allows for easy filter inspection without disassembly.

• Donaldson PowerCore Ultra-Web dry filtration (99.96% efficient)
• Up to 150,000-mile maintenance-free filtration interval
• Smoked acrylic see-through airbox lid for easy monitoring
• Rugged airbox design protects filter from engine bay heat
• Easy bolt-on installation; typically installs in under one hour
• Made in the USA
• Manufacturer Part Number: 465576-1
• Lifetime Warranty

Fits select 2014-2020 Chevrolet Silverado 1500/1500 LD, Suburban, Tahoe and GMC Sierra 1500/1500 Limited, Yukon, and Yukon XL (5.3L / L83-5.3L).

The Corsa Performance cold air intake system is designed to maximize airflow and engine efficiency by replacing restrictive factory components with a high-flow, heat-resistant induction setup. Engineered from rugged crosslinked polyethylene, the enclosed airbox and intake ducting resist heat soak to ensure cooler, denser air reaches the L83 engine. This system features Corsa's signature smoked acrylic lid, providing a clear window for filter inspection without disassembly.

• DryTech no-oil synthetic air filter provides 98% filtration efficiency and maximum airflow.
• Reusable filter media offers up to 40,000 miles of maintenance-free driving under normal conditions.
• Fully enclosed airbox protects the intake charge from hot engine bay air.
• Durable crosslinked polyethylene construction for long-term structural integrity.
• Complete bolt-on installation typically takes under one hour with no ECU tuning required.
• Made in the USA and backed by a manufacturer's Lifetime Warranty.
• Manufacturer Part Number: 45553D-1

Fits select 2015-2019 Chevrolet Corvette Stingray and 2017-2019 Grand Sport (6.2L LT1).

Upgrade your C7 induction system with the CORSA Performance Carbon Fiber Air Intake. Engineered from 100% carbon fiber, this intake replaces the restrictive factory airbox with an optimized shape designed for maximum strength and thermal efficiency. The system is dyno-tuned to deliver substantial gains of up to 44 HP and 70 lb-ft of torque on the LT1 engine without requiring an ECU reflash.

This kit features the DryTech 3D non-oiled filtration system, offering high-capacity airflow and simplified maintenance. The assembly includes a precision-machined black anodized aluminum MAF mounting bracket to ensure accurate sensor readings and a direct bolt-on installation that fits factory mounting points.

• 100% Carbon Fiber construction for maximum strength and heat resistance
• DryTech 3D high-performance non-oiled synthetic filter
• Machined black anodized aluminum MAF mounting bracket
• Up to 44 HP and 70 lb-ft Torque increase (No Tune Required)
• Direct bolt-on installation replaces factory components in minutes
• Manufacturer Part Number: 44002D
• Limited Lifetime Warranty on intake; 1-year warranty on filter

Fits 2023-2024 Toyota GR Corolla Core, Circuit Edition, Morizo Edition, and Premium models.

The AWE Tuning S-FLO Carbon Fiber Intake is engineered to optimize airflow and improve thermal management for the G16E-GTS engine. This system replaces restrictive factory airbox components with a high-flow design, utilizing premium carbon fiber for its lightweight properties and natural resistance to heat soak. Designed as a direct bolt-on solution, the S-FLO intake integrates with factory mounting points to ensure a secure fit and a clean, professional appearance under the hood.

• High-quality carbon fiber construction for durability and heat resistance
• S-FLO series design for optimized induction pathing
• Direct bolt-on replacement for factory intake components
• Retains factory mounting locations for precise fitment
• Manufacturer Part Number: 2660-15316

Fits 2015-2020 Ford F-150 (V8-5.0L).

The aFe POWER Super Stock Induction System is a high-performance upgrade designed to optimize the intake tract of your V8-powered F-150. This system replaces the restrictive factory intake tube with a computer-designed, dyno-tuned component made from cross-linked polyethylene (XLPE). This material is chosen for its extreme durability and natural resistance to heat soak, ensuring cooler air reaches the engine.

This kit features the Pro 5R air filter, which utilizes five layers of pre-oiled, progressive cotton gauze media. This design provides maximum airflow and filtration efficiency, making it suitable for both high-performance street use and track applications. The filter is fully washable and reusable, designed to be serviced with aFe POWER blue filter oil and cleaner. Installation is a direct bolt-on process that requires no aftermarket tuning, utilizing premium stainless steel clamps and silicone couplings for a secure, long-lasting seal.

• Manufacturer Part Number: 55-10011R
• Filter Media: Pro 5R (5-layer pre-oiled cotton gauze)
• Tube Material: Heat-resistant XLPE (Cross-linked Polyethylene)
• Hardware Included: Stainless steel clamps and silicone couplings
• Compatibility: 2015-2020 Ford F-150 (V8-5.0L)
• No ECU tuning required for installation

Fits 2011-2014 Ford F-150 models including SVT Raptor, Lariat, Platinum, FX2, FX4, Harley-Davidson Edition, and XLT (6.2L V8).

Improve your engine's breathing and efficiency with the CORSA Performance Cold Air Intake system. This intake is specifically engineered to maximize air volume through sculpted ducts with larger diameters, unique bends, and smooth transitions that eliminate the restrictive nature of the factory setup. The included closed airbox design is critical for thermal management, isolating the filter from engine bay heat to ensure a cooler, denser air charge enters the combustion chamber.

At the heart of this system is the Donaldson PowerCore Filter, which utilizes specialized channels to trap dust and contaminants with high efficiency while maintaining superior airflow. This dry filtration technology requires no oiling and no cleaning, offering a service life of up to 150,000 miles or 4 years under normal driving conditions.

• Air Filtration: Maintenance-free Donaldson PowerCore filter uses dry media to optimize performance without oil.
• Heat Management: Enclosed filter box minimizes hot air intake for improved engine efficiency.
• Durable Components: High-performance silicone connectors provide flexibility and thermal stability; marine-grade clamps ensure secure seals.
• Installation: Includes all necessary hardware for a complete bolt-on installation.
• Origin: Made in the U.S.A.
• MPN: 44388
• Warranty: Limited Lifetime Warranty.

Fits 2015-2019 Chevrolet Corvette Stingray and 2017-2019 Corvette Grand Sport models. This Corsa Performance carbon fiber air intake is engineered to maximize airflow while delivering an aggressive engine note and premium under-hood aesthetics.

Constructed from 100% genuine carbon fiber, this intake system (MPN 44002) optimizes airflow paths to significantly reduce restriction compared to the factory assembly. The included MaxFlow 5 oiled cotton gauze filter uses five layers of high-performance media to capture contaminants while maintaining high flow rates. Dyno-tested for the LT-1 engine, this bolt-on upgrade provides gains of up to 44 HP and 70 lb-ft of torque without requiring an aftermarket ECU tune.

• Material: 100% Carbon Fiber construction for maximum strength and heat resistance
• Filtration: High-flow 5-layer oiled cotton gauze MaxFlow 5 filter
• MAF Housing: Precision-machined black anodized aluminum MAF mounting bracket
• Performance: Up to 44 HP and 70 lb-ft TQ increase (results based on LT-1 engine)
• Installation: Direct bolt-on design replaces factory components in minutes
• Tuning: Optimized shape allows for maximum results without a tune
• Warranty: Limited Lifetime Warranty on intake assembly; 1-year warranty on filter

Fits 2021-2023 Ford F-150 EcoBoost, Raptor, and Tremor models. This Cobb intake system is engineered to optimize the breathing of your twin-turbocharged V6 by replacing the restrictive factory airbox components with a high-flow solution designed for maximum efficiency.

Constructed with durability and performance in mind, this system includes an integrated High Carbon Trap (HCT) to ensure emissions compliance without sacrificing the airflow gains Cobb is known for. It serves as a direct-fit upgrade that utilizes factory mounting points for a straightforward installation, providing improved induction sound and more consistent power delivery across the RPM range.

• Direct replacement for the factory airbox and intake plumbing
• Includes High Carbon Trap (HCT) for emissions compliance
• Designed for 2.7L and 3.5L EcoBoost engines
• Improved airflow and filtration surface area
• Manufacturer Part Number: 7F2150

Fits 2018-2020 Ford F-150 Raptor and 3.5L EcoBoost, and 2019-2020 Ford F-150 Limited models (3.5L).

The Cobb Intake System with HCT (Hydrocarbon Trap) is engineered to optimize the induction path for your twin-turbocharged Ford F-150. This system replaces the factory airbox and piping with a more efficient design, reducing turbulence and allowing the 3.5L EcoBoost engine to breathe more freely. By integrating the HCT, this system maintains emissions compliance while providing the increased induction sound and throttle response performance enthusiasts demand.

• Direct bolt-on installation using factory mounting points
• Integrated Hydrocarbon Trap (HCT) for emissions maintenance
• High-flow design improves air delivery to the turbochargers
• Durable construction engineered to withstand high under-hood temperatures
• Manufacturer Part Number: 7F2125

Fits 2013-2018 Ford Focus ST.

The COBB Tuning Cold Air Intake system is engineered to reduce intake restriction and optimize the airflow path to the turbocharger. By replacing the restrictive factory airbox and intake plumbing, this kit allows the engine to breathe more efficiently while providing a noticeably more aggressive induction sound. This system is a direct-fit performance upgrade that utilizes factory mounting points for a straightforward installation without the need for permanent vehicle modifications.

• Direct-fit for 2013-2018 Ford Focus ST
• Streamlined airflow path to improve turbocharger response
• High-flow reusable air filter for long-term durability and serviceability
• Increases audible induction and bypass valve sounds
• Uses factory mounting points for a secure, OE-style fitment
• Manufacturer Part Number: 792150

Fits select 2015-2025 Lexus IS500 and RC F models (V8-5.0L).

The AEM 21-780C Performance Air Intake System is engineered to replace the restrictive factory airbox, allowing your engine to breathe more freely for improved throttle response and power. This system features a mandrel-bent aluminum intake tube with a durable gunmetal gray powder-coated finish, ensuring smooth, laminar airflow to the engine.

To maintain cool intake temperatures, this kit includes a custom-shaped heat shield equipped with a premium carbon fiber lid, effectively isolating the intake from engine bay heat soak. Filtration is handled by an oversized AEM Dryflow synthetic filter. This oil-free, washable media provides outstanding filtration efficiency and can go up to 100,000 miles before cleaning is required, depending on driving conditions.

• Mandrel-bent aluminum intake tube with gunmetal gray finish
• Oil-free AEM Dryflow synthetic washable air filter
• Custom heat shield with carbon fiber lid
• Direct-fit design replaces factory intake housing
• Manufacturer Part Number: 21-780C
• Backed by AEM's Lifetime Limited Warranty

Fits 2011-2017 Honda Odyssey (3.5L).

The Weapon R Secret Weapon Intake is designed to significantly increase air volume and velocity into your engine. By utilizing a tuned intake path and high-velocity filter technology, this system solves the airflow restrictions found in the factory air box, resulting in improved throttle response and a more aggressive intake sound. The Secret Weapon series is engineered to optimize the air-to-fuel ratio by providing a consistent, high-speed stream of cold air directly to the throttle body.

• Series: Secret Weapon
• Manufacturer Part Number: 301-180-101
• Engine Fitment: 3.5L V6
• Construction: High-quality intake tubing designed for optimal heat dissipation
• Filter Type: Includes a high-flow performance air filter designed for maximum surface area
• Installation: Designed to replace the OEM intake assembly

Fits select 1985-1987 Toyota Corolla Sport GTS and 2021 Toyota Tundra (1.6L) fuel-injected models.

Unlock dyno-proven power and an aggressive engine tone with the Injen Technology IS Series Performance short ram air intake. This kit replaces the restrictive factory airbox with a mandrel-bent T6-6061 aluminum intake tube, designed to streamline airflow into the engine. Engineered to maintain safe air/fuel (A/F) ratios without the need for additional tuning, this system provides a direct bolt-on performance upgrade you can hear and feel.

Every IS Series intake includes the Injen SuperNano-Web dry air filter. This fully serviceable filter provides a larger surface area for increased airflow while maintaining superior filtration levels. The polished finish offers a classic engine bay look, all while backed by a manufacturer limited lifetime warranty.

• Dyno-proven gains of up to 7 hp and 5.2 lb-ft of torque
• Mandrel-bent T6-6061 aluminum intake tubing eliminates airflow restrictions
• Includes SuperNano-Web dry air filter (Replacement: X-1010-BB)
• Compatible with optional hydroshield (1035BLK or 1035RED)
• CARB EO #: D-476-5 for emissions compliance
• Made in Pomona, California, USA
• MPN: IS2200P

Fits 1992-1996 Honda Prelude (S, SE, Si, and VTEC models).

The Injen IS Performance short ram air intake delivers improved throttle response and an aggressive engine tone by replacing the restrictive factory induction system with mandrel-bent T6-6061 aluminum tubing. This kit is engineered to provide a smooth, uninterrupted path for airflow while maintaining safe air-fuel ratios throughout the powerband without the need for aftermarket tuning.

• Constructed from T6-6061 mandrel-bent aluminum for maximum airflow efficiency
• Features a polished finish for a clean, custom engine bay aesthetic
• Includes a fully serviceable Injen SuperNano-Web dry air filter (X-1014-BB)
• CARB EO #: D-476
• Manufactured in Pomona, California, USA
• Compatible with optional hydroshields (part numbers 1033BLK or 1033RED)
• Manufacturer Part Number: IS1700P
• Backed by the Injen Technology Limited Lifetime Warranty

Fits 2018-2023 Dodge Durango SRT Hellcat and Jeep Grand Cherokee Trackhawk (6.2L).

The CORSA Performance carbon fiber cold air intake (MPN 44011D) is engineered to maximize airflow and intake aesthetics for supercharged 6.2L HEMI applications. Featuring an oversized, dual-layer carbon fiber air duct and a matching carbon fiber heat shield, this system streamlines air delivery from the stock hood air passage and grille while effectively shielding the intake from radiant engine bay heat. This design increases supercharger whine and delivers dyno-proven performance gains of up to 14 horsepower and 13 lb-ft of torque.

This kit includes the low-maintenance DryTech 3D synthetic filter, which requires no oil and provides high-flow filtration with high dust-holding capacity. The system is built with premium components, including multi-ply silicone hoses and heavy-duty T-bolt style hose clamps for a secure, leak-free fit. Installation is a direct bolt-on process that typically takes under an hour and requires no aftermarket ECU tuning.

• Dyno-proven gains: +14 HP and +13 lb-ft of Torque
• Oversized dual-layer carbon fiber air duct for maximum volume
• Full carbon fiber heat shield funnels cool air and blocks engine heat
• DryTech 3D non-oiled synthetic high-flow air filter
• Includes multi-ply silicone hoses and stainless T-bolt clamps
• Direct bolt-on installation; no tune required
• Manufacturer Part Number: 44011D
• Limited Lifetime Warranty (1-year on filter)

Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500/3500 HD (6.6L L5P Duramax).

Maximize the efficiency of your L5P Duramax with the Wehrli Custom Fabrication (WCFab) Stage 2 High Flow Intake Bundle Kit. This comprehensive package replaces the restrictive factory intake and charge air plumbing with high-flow components designed to eliminate boost leaks and optimize aerodynamic flow. The kit upgrades the intake to a 4-inch diameter system and replaces the stock 2-piece intercooler pipes with heavy-duty aluminum versions. The driver-side (hot side) pipe is increased to 3 inches, while the passenger-side (cold side) pipe is enlarged to 3.5 inches to provide a significant volume increase over the OEM components.

Constructed in the USA from 14-gauge mandrel-bent aluminum, this kit replaces the failure-prone plastic and rubber factory sections. It features a CNC machined flange with double O-rings for a reliable seal at the intercooler and replaces the problematic OEM clip ring at the Y-bridge with a heavy-duty silicone boot and stainless steel T-bolt clamps. This bolt-on system requires no ECM tuning and retains all factory sensor connections.

• 4 in. Aluminum intake pipe with air box enclosure and dry filter assembly
• Hydrophobic Outerwears pre-filter cover to protect the MAF sensor and turbo
• 3 in. Driver-side (Hot Side) 1-piece intercooler pipe
• 3.5 in. Passenger-side (Cold Side) intercooler pipe
• CNC machined flange with double O-rings to eliminate boost leaks
• Heavy-duty 14 ga. aluminum construction with smooth mandrel bends
• High-quality silicone boots and stainless steel T-bolt clamps
• Custom Illusion Purple powder coat finish
• Made in the USA
• Manufacturer Part Number: WCF100414-IP

Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD (L5P Duramax 6.6L).

The WCFab Stage 2 High Flow Intake Bundle Kit is a comprehensive performance upgrade designed to eliminate the restrictions and failure points of the factory induction system. This kit replaces the restrictive 4-inch OEM intake and the leak-prone, multi-piece intercooler piping with heavy-duty 14-gauge mandrel-bent aluminum components. The driver-side (hot) pipe is upgraded to a 3-inch diameter 1-piece design, while the passenger-side (cold) pipe is increased to 3.5 inches, replacing the brittle plastic and rubber factory units.

Constructed for durability and maximum airflow, the kit includes a high-flow dry filter assembly housed in a custom air box with a removable lid for easy maintenance. The intake features a CNC-machined flange with double O-rings and a 4-inch turbo inlet horn with an integrated PCV port and surge ring. Finished in a signature WCFab Candy Red powder coat, this bolt-on kit requires no tuning and maintains all factory sensor connections.

• 4 in. Aluminum intake pipe with air box enclosure and dry filter
• Outerwears hydrophobic pre-filter cover included
• 3 in. Driver-side (Hot) intercooler pipe
• 3.5 in. Passenger-side (Cold) intercooler pipe
• CNC machined flange with double O-rings for leak-free sealing
• Heavy-duty 14 ga. aluminum construction with mandrel bends
• Includes silicone boots, stainless steel T-bolt clamps, and installation hardware
• Retains factory connection points and sensors; no tuning required
• Manufactured in the USA
• MPN: WCF100414-CR

Fits 2005-2007 Toyota Sequoia and 2005-2006 Toyota Tundra (4.7L V8).

Upgrade your vehicle's breathing with the Volant Performance Closed Box Air Intake System. This system is engineered to replace restrictive factory plumbing with a high-flow, heat-shielded design that increases overall air volume while protecting the engine from high under-hood temperatures. The rugged air box features an insulated metallic lid to further isolate the intake charge from engine heat, ensuring cooler, denser air reaches the combustion chamber.

At the core of this system is the Pro5 air filter, a high-performance 5-layer oiled cotton gauze media. Designed for 98% filtration efficiency, the Pro5 filter is washable and reusable, offering extended maintenance intervals up to 40,000 miles depending on driving conditions. This bolt-on kit installs in under an hour using standard hand tools and factory mounting points.

• Filter Type: Pro5 Oiled Cotton Gauze (5-Layer)
• Housing: Enclosed Thermal-Resistant Box with Insulated Metallic Lid
• Efficiency: 98% Filtration Rating
• Maintenance: Reusable; up to 40k miles between cleanings
• Installation: Easy bolt-on; estimated under 1 hour
• Manufacturer Part Number: 18047

Fits 2022-2026 Subaru WRX.

The PERRIN Cold Air Intake for the 2022-2026 Subaru WRX (PSP-INT-328NY) is engineered to maximize airflow and reduce intake temperatures. By replacing the restrictive factory air box with a smooth-flow intake tube and a high-flow filter, this system improves throttle response and engine efficiency. The included heatshield is laser-cut for a precise fit, effectively isolating the intake from radiant engine bay heat to ensure a cooler, denser air charge.

• Precision-engineered intake tube with a durable Neon Yellow powder-coated finish
• Custom-fit heatshield prevents heat soak by blocking radiant engine heat
• High-flow filtration media for increased air volume and filtration efficiency
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: PSP-INT-328NY

Fits 2022-2026 Subaru WRX.

The PERRIN Cold Air Intake with Heatshield (PSP-INT-328HP) is engineered to improve engine performance by reducing intake restriction and lowering air temperatures. This system replaces the restrictive factory air box with a high-flow intake tube and filter, allowing the turbocharger to breathe more efficiently. To combat performance-robbing heat soak, the kit includes a dedicated heatshield that isolates the air filter from radiant engine bay heat, ensuring a consistent supply of cool, dense air.

• Direct bolt-on fitment for 2022-2026 Subaru WRX
• Hyper Pink powder-coated finish for durability and engine bay aesthetics
• Integrated heatshield blocks engine heat to maintain lower intake air temperatures (IATs)
• Designed to improve throttle response and provide a more aggressive induction sound
• Complete kit includes intake tube, high-flow filter, heatshield, and installation hardware
• Manufacturer Part Number: PSP-INT-328HP

Fits select 2007-2008 Cadillac Escalade, Chevrolet Silverado/Tahoe/Suburban/Avalanche/Express/Trailblazer, and GMC Sierra/Yukon/Envoy models (V8-4.8L/5.3L/6.0L/6.2L).

The aFe POWER Momentum GT Stage-2 Si intake system is engineered to maximize airflow and minimize heat soak on GMT900-platform GM trucks and SUVs. This system replaces the restrictive factory air box with a high-efficiency sealed housing and a high-flow intake tube. The unique one-piece sealed housing is rotomolded from heat-resistant XLPE (cross-linked polyethylene) to protect the intake charge from engine bay heat, while a built-in clear sight window allows for easy filter inspection without disassembly.

At the core of this system is the Pro 5R performance air filter, featuring five layers of progressively finer medical-grade cotton gauze media. This oiled media provides maximum airflow and filtration efficiency for high-performance applications. The kit includes premium hardware, such as stainless steel T-bolt clamps and a reinforced silicone coupler, ensuring a secure and durable installation that stands up to the rigors of towing and daily driving.

• Manufacturer Part Number: 54-74102
• Filter Type: Pro 5R (5-layer oiled cotton gauze)
• Housing Material: Heat-resistant XLPE (Cross-linked Polyethylene)
• Housing Design: One-piece sealed unit with clear sight window
• Hardware: High-quality stainless steel T-bolt clamps and silicone coupling
• Installation: Replaces factory intake using existing mounting points

Fits 2016-2018 Volkswagen Jetta S, SE, Hybrid SEL Premium, and Wolfsburg Edition models (I4-1.4L).

Replace your restrictive factory airbox with the Injen SP Series Short Ram Intake System for improved throttle response and performance. The SP3030P features a mandrel-bent 6061-T6 aluminum intake tube designed for a smooth, uninterrupted airflow path. This system utilizes Injen's patented MegaRam (MR) Technology and Air Fusion tuning to ensure significant power gains while maintaining safe air-fuel ratios throughout the power band.

Engineered for efficiency, this kit includes a custom heat shield with a cover to isolate the intake from engine bay heat. It comes equipped with a fully serviceable SuperNano-Web dry air filter, providing superior filtration without the need for filter oil. Experience a more aggressive engine tone under acceleration and a dyno-proven increase of up to 6 horsepower and 6 lb-ft of torque.

• 6061-T6 aluminum intake tubing with a polished finish
• Includes custom heat shield and cover for maximum thermal protection
• SuperNano-Web dry air filter (Replacement Part: X-1062-BB)
• Dyno-proven gains of up to 6 HP and 6 lb-ft of torque
• Patented MegaRam and Air Fusion technology for precise tuning
• No additional tuning required after installation
• Limited Lifetime Warranty
• Made in Pomona, California, USA
• Optional Hydroshield available (Part: 1031BLK)

Note: This product is not currently CARB exempt and is not available for purchase or use in California.

Fits 2002-2005 Mitsubishi Lancer (ES, LS, OZ Rally) and 2003 Outlander (LS, XLS).

The Weapon R Dragon Intake is a high-flow induction system designed to replace the restrictive factory airbox and intake tubing. Engineered to optimize airflow into the engine, the Dragon Intake utilizes a CNC-mandrel bent aluminum tube to ensure smooth, laminar flow, resulting in increased air volume and improved throttle response across the RPM range.

Each kit features a high-polished finish for an upgraded engine bay aesthetic and includes all necessary hardware for a direct-fit installation. The included Dragon filter uses a dense foam media designed to capture contaminants while maintaining superior flow rates compared to traditional paper filters.

• Manufacturer Part Number: 803-120-101
• Series: Dragon Intake
• Finish: Polished Aluminum
• Tube Material: CNC-Mandrel Bent Aluminum
• Filter Type: High-Flow Foam Media
• Installation: Direct bolt-on to factory mounting points
• Includes mounting hardware and filter

Fits select 1990-1998 Subaru Impreza, Forester, and Legacy models equipped with 2.2L and 2.5L engines.

The Weapon R Secret Weapon Intake is engineered to optimize airflow and increase intake velocity. By replacing the restrictive factory air box and corrugated piping with a high-flow mandrel-bent intake tube and a tuned Secret Weapon air filter, this system reduces turbulence and allows the engine to breathe more efficiently. The dual-tube technology within the intake is designed to create a Venturi effect, speeding up air delivery into the throttle body for improved engine response.

• Manufacturer Part Number: 306-111-101
• Designed for naturally aspirated 2.2L and 2.5L Subaru boxer engines
• High-flow Secret Weapon air filter included
• Replaces OEM intake assembly for improved induction sound and efficiency

Fits 2002-2006 Lexus ES300 and ES330 Base models.

The Weapon R Secret Weapon Intake is engineered to increase airflow to the intake manifold by replacing the restrictive factory airbox. This system uses a tuned intake pipe to maintain air velocity and improve throttle response across the RPM range. Designed specifically for the Lexus ES platform, it replaces the OE ducting with a high-flow alternative that delivers a more aggressive engine note and better performance.

• Manufacturer Part Number: 305-138-101
• High-flow design optimizes engine airflow and efficiency
• Direct replacement for factory intake assembly
• Includes necessary hardware for a complete installation
• Fits 2002-2003 Lexus ES300 and 2004-2006 Lexus ES330

Fits 2014 Nissan Juke Nismo, Nismo RS, S, SL, and SV models (1.6L Turbo).

The Weapon R Secret Weapon Intake is engineered to maximize air velocity and volume delivered to the turbocharger. By replacing the restrictive factory airbox and intake tract, this system utilizes a high-velocity internal tube design to create a venturi effect, increasing air speed for improved throttle response and torque. Built from mandrel-bent aluminum and paired with a high-flow reusable foam filter, this system provides the 1.6L MR16DDT engine with a denser oxygen charge for more efficient combustion.

• Internal velocity stack design to optimize air intake speed
• Direct bolt-on installation using factory mounting locations
• High-flow, multi-density foam air filter
• Precision-bent aluminum intake piping for smooth airflow
• Manufacturer Part Number: 304-144-101

Fits 2005-2007 Honda Accord 4-cylinder models (Low Emission Vehicle / LEV only with MAF sensor).

The Weapon R Secret Weapon Intake is designed to maximize air velocity and volume delivered to the engine. By utilizing a unique internal velocity stack, this intake system accelerates airflow while reducing turbulence, resulting in improved throttle response and increased torque throughout the mid-range. Constructed from CNC-mandrel bent 6061 aluminum, this system replaces the restrictive factory air box with a high-flow setup tuned specifically for the Accord's 4-cylinder LEV configuration.

• High-flow Secret Weapon air filter for maximum surface area and filtration
• Custom CNC-machined MAF sensor mount for accurate engine signaling
• Polished 6061 aluminum intake tubing for durability and heat dissipation
• Includes all necessary silicone couplers and stainless steel clamps
• Manufacturer Part Number: 301-156-101

Fits 2001-2005 Lexus IS300 Base and Sportcross models (L6-3.0L).

The K&N 57-Series FIPK system replaces your vehicle's restrictive factory air filter and intake housing. It utilizes a rotationally-molded high-density polyethylene (HDPE) tube to streamline and increase the volume of airflow to the engine for a measurable increase in horsepower and torque. The oversized, conical High-Flow Air Filter is constructed with oiled cotton media, providing excellent filtration and a service interval of up to 100,000 miles under normal highway driving conditions. To maintain power gains, a custom heat shield is included to protect the intake air from high engine bay temperatures.

• Rotationally-molded HDPE intake tube for increased airflow volume
• Washable and reusable oiled cotton High-Flow Air Filter
• Custom heat shield helps maintain lower intake air temperatures
• Easy bolt-on installation typically completed in under 90 minutes
• Million Mile Limited Warranty
• Manufacturer Part Number: 57-9018

Fits 2021-2025 Ford Bronco models (V6-2.7L / 2.7L). This Injen Technology Evolution Series cold air intake is a 3D-designed, drop-in performance upgrade for the 2.7L EcoBoost engine. Engineered to maximize airflow without requiring an aftermarket tune, this system features a custom tapered dual intake tube design that maintains high-velocity air delivery all the way to the twin turbo inlets.

• Direct Bolt-On Performance: Dyno-proven gains of up to 26 hp and 27 lb.-ft. of torque with no check engine lights.
• Advanced Filtration: Includes a fully serviceable 8-layer oiled cotton gauze air filter (P/N X-1116-BR) featuring Injen’s patented Twist-Lock attachment for a secure, gasket-free seal.
• Durable Construction: The housing and intake tubes are roto-molded from cross-linked polyethylene (XLPE) for superior heat soak resistance and impact durability.
• Serviceability: A built-in clear inspection badge allows for quick filter condition checks without disassembling the airbox.
• Versatile Airflow: Features a massive forward-facing inlet and a secondary inlet designed for maximum volume or future compatibility with Injen snorkel systems.
• Premium Hardware: Equipped with reinforced automotive-grade silicone couplers and stainless steel band clamps with inner protective liners.

Note: This product is not currently CARB exempt and is not legal for sale or use in California. Made in Pomona, California, USA. Covered by a Limited Lifetime Warranty.

Fits 2007-2011 Jeep Wrangler (JK) models equipped with the V6-3.8L engine.

The aFe POWER Momentum GT cold air intake system is engineered to maximize airflow and filtration for the Jeep Wrangler JK. This system features a unique, one-piece sealed housing constructed from heat-resistant cross-linked polyethylene (XLPE), ensuring cool intake charges. The housing includes a built-in, see-through sight glass for quick filter inspections without disassembly and a large auxiliary air scoop to bring in additional cool air. A custom-designed rotomolded intake tube is dyno-tuned to achieve maximum power gains while maintaining a perfect fit.

Equipped with the Pro GUARD 7 filter media, this system provides seven layers of progressive cotton gauze and synthetic media to provide maximum protection in off-road and high-dust environments. The filter features a 360-degree radial flow design with an inverted top for increased surface area and flow capacity. Installation is straightforward using factory mounting points and the included premium stainless steel T-bolt clamps.

• Manufacturer Part Number: 75-76203
• Filter Media: Pro GUARD 7 (7-Layer washable/reusable media)
• Housing Material: High-temperature rotomolded plastic
• Included Hardware: Stainless steel T-bolt clamps and urethane auxiliary scoop plug
• Special Features: Built-in sight glass and patent-pending filter-to-housing interface