Fits 2018-2023 Kia Stinger GT, GT1, GT2, GTS, and Tribute Edition (3.3L Twin Turbo).

Unlock the performance potential of your 3.3L Twin Turbo Stinger with the Injen SP Series Short Ram Intake. This bolt-on upgrade replaces the restrictive factory air boxes with dual mandrel-bent 6061-T6 aluminum intake tubes. Featuring Injen's patented MegaRam (MR) Technology, this system is dyno-proven to deliver gains of up to 21 hp and 18 lb-ft of torque while maintaining safe Air/Fuel ratios without the need for an aftermarket tune.

The SP1350WR kit utilizes a specialized stepped tube design (3.00in to 2.50in to 2.25in) to optimize air velocity into the turbochargers. It comes equipped with two high-performance SuperNano-Web dry air filters, providing superior filtration and high-flow capacity without the maintenance required by oiled filters.

• Dual 6061-T6 aluminum intake tubing with Wrinkle Red finish
• Stepped design (3.00in to 2.50in to 2.25in) for maximum airflow velocity
• Patented MegaRam (MR) Technology ensures safe A/F ratios
• Includes two SuperNano-Web dry air filters (Part #X-1078-BB)
• Aggressive engine tone under wide-open throttle
• Simple bolt-on installation with no ECU tuning required
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA

Note: This product is not currently CARB exempt and is not legal for sale or use in California or on vehicles registered with the California DMV.

Fits 2002-2007 Subaru Impreza WRX and WRX STI (Excludes Wagon models).

Improve your Subaru's throttle response and horsepower with the Injen RD Series cold air intake. This system replaces the restrictive factory airbox with 6061-T6 mandrel-bent aluminum tubing, specifically designed to draw cooler, denser air from deeper within the engine bay. By optimizing the air-fuel ratios for maximum efficiency, the RD1200WR provides dyno-proven gains of up to 24.4 HP and 24 lb-ft of torque without requiring a custom tune.

The intake features the SuperNano-Web dry air filter, which provides high-flow filtration without the need for oiling. Finished in a durable Wrinkle Red powder coat, this intake system provides a throaty, aggressive tone under acceleration while dressing up the engine bay. It is a direct bolt-on upgrade that mounts to factory locations for a secure, professional fit.

• Manufacturer Part Number: RD1200WR
• Tubing Material: 6061-T6 Mandrel-bent aluminum
• Filter Type: SuperNano-Web dry air filter (Replacement Part: X-1013-BB)
• Finish: Wrinkle Red (WR) powder coat
• Performance Gains: Up to 24.4 HP and 24 lb-ft of torque
• Emissions Legal: CARB EO #: D-476-5
• Manufacturing: Made in Pomona, California USA
• Warranty: Limited Lifetime Warranty
• Compatible Accessories: Optional Hydroshield (1033BLK / 1033RED)

Fits 2020-2023 Chevrolet Corvette Stingray models.

The CORSA Performance C8 Corvette air intake is engineered from 100% carbon fiber to provide maximum strength and thermal efficiency. By optimizing the internal geometry of the intake tract and utilizing high-performance filtration, this system delivers dyno-proven gains of up to 14 HP and 13 lb-ft of torque from the LT2 engine without requiring an ECU tune. This kit features DryTech filtration media, which provides superior air flow and filtration efficiency while extending maintenance intervals up to 50,000 miles depending on driving conditions.

• 100% carbon fiber construction for superior aesthetics and heat management
• Delivers gains of up to 14 HP and 13 lb-ft of torque
• DryTech filter media ensures reduced maintenance and high airflow
• Machined black anodized aluminum MAF mounting bracket for precision fitment
• Integrated aluminum heat shield protects the carbon fiber assembly
• Includes premium T-bolt clamps and black screw hardware
• Bolt-on installation with no tuning required
• Manufacturer Part Number: 44003D

Fits 2012-2019 BMW M5, M6, and M6 Gran Coupe (V8-4.4L).

The aFe Power Momentum PRO 5R intake system is engineered to maximize airflow and performance for the S63 twin-turbo V8 engine. This system replaces the restrictive factory setup with twin, black rotomolded airboxes designed to insulate the intake charge from engine heat soak. CAD-designed intake tubes provide a smooth, aerodynamic path for airflow, allowing the engine to produce an additional 28 horsepower and 31 lbs. x ft. of torque.

This system uses a unique, patent-pending filter-to-housing interface that accommodates the largest filters possible for increased surface area and simplified installation. The included 360-degree radial flow Pro 5R filters feature five layers of progressively finer mesh oiled cotton gauze to provide maximum flow and protection. This high-performance configuration outflows the factory intake by 29%.

• Manufacturer Part Number: 54-76301
• Performance Gains: Up to +28 HP and +31 lbs. x ft. Torque
• Flow Rating: Outflows factory intake by 29%
• Filter Media: Pro 5R 5-layer oiled cotton gauze
• Housing Material: Heat-insulating black rotomolded plastic
• Installation: Direct bolt-on; all hardware included
• Legal Status: Race Only; illegal for street use
• Warranty: 2-Year Limited Warranty

Fits select 2011-2016 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD (6.6L Duramax LML).

Upgrade your Duramax airflow with the Wehrli Custom Fab (WCFab) Stage 2 Intake Kit. This system replaces the restrictive plastic factory intake with a high-flow, fabricated aluminum 4-inch intake pipe and a dedicated air box enclosure. By drawing cool air from the inner fender, this kit reduces intake temperatures and improves throttle response. A key component of the Stage 2 kit is the included 4.8-inch cast aluminum turbo intake horn, which eliminates the factory resonator and removes intake restrictions to improve turbo spool and top-end power.

The included dry air filter features a hydrophobic Outerwear's pre-filter cover to protect your MAF sensor and turbo from contaminants. Finished in a durable Gloss Black powder coat, this bolt-on kit requires no ECU tuning for operation. Note: 2011 model year trucks must update to a 2012-2016 spec PCV Regulating Valve for correct fitment.

• 4-inch fabricated aluminum intake pipe with smooth aerodynamic bends
• 4.8-inch high-flow cast aluminum turbo intake horn (VGT compatible)
• Enclosed air box with removable lid for easy maintenance
• Dry air filter with hydrophobic pre-filter cover
• Heavy-duty silicone boot and stainless steel T-bolt clamps
• Includes turbo O-ring seal, EGR gaskets, and installation hardware
• No tuning required; direct bolt-on installation
• Gloss Black powder coat finish
• Manufacturer Part Number: WCF100304-GB
• Made in the USA

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500/3500 HD (6.6L Duramax LML).

Replace the restrictive factory plastic intake with the WCFab 4" Intake Kit, designed to maximize airflow and optimize the performance of your 6.6L LML Duramax. This kit features a fabricated aluminum intake pipe with large 4" diameter piping and smooth, aerodynamic bends. By drawing colder, denser air through the inner fender, this system reduces intake temperatures, improves throttle response, and provides a more aggressive engine and turbo sound under load.

The included air box enclosure features a removable lid for easy maintenance and visual inspection. The system utilizes a high-efficiency dry air filter protected by an Outerwear's hydrophobic pre-filter cover, keeping your MAF sensor and turbocharger compressor wheel safe from contaminants and moisture. This is a true bolt-on upgrade that requires no aftermarket tuning for operation and is finished in WCFab Red powder coat for long-term durability.

• Fabricated 4" aluminum intake pipe and air box enclosure
• High-flow dry air filter with Outerwear's hydrophobic pre-filter cover
• Heavy-duty silicone boot and stainless steel T-bolt clamps
• Custom WCFab Red powder coat finish
• No tuning required; direct bolt-on installation
• Made in the USA
• Manufacturer Part Number: WCF100194-RED

Fits 2008-2010 Chevrolet Cobalt SS (L4-2.0L Turbo).

The K&N 69-4518TTK 69 Series Typhoon Short Ram Intake system is a performance-oriented induction kit designed to replace the restrictive factory air filter and intake housing on your Cobalt SS. By utilizing a mandrel-bent aluminum intake tube, this system reduces airflow restriction and ensures a smooth, consistent path for air to reach the turbocharger, resulting in measurable gains in horsepower and torque.

Each system is equipped with a washable, reusable High-Flow Air Filter featuring K&N signature oiled cotton filter media. This oversized conical filter is designed for high airflow and can go up to 100,000 miles between services under normal highway driving conditions. A custom-fit heat shield is included to isolate the air filter from high engine bay temperatures, ensuring a cooler, denser intake charge.

• Guaranteed increase in horsepower and torque
• Mandrel-bent aluminum intake tube for improved airflow
• Includes washable, reusable oiled cotton High-Flow Air Filter
• Custom heat shield helps protect intake air from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 69-4518TTK
• K&N Million Mile Limited Warranty

Fits 2000-2008 Honda S2000 Base and CR models (2.0L / 2.2L).

The K&N 57-3514 Performance Air Intake System is engineered to replace the restrictive factory air filter and intake housing to provide a guaranteed increase in horsepower and torque. It features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to streamline and increase the volume of airflow to your engine. The system includes a custom heat shield to help isolate the intake air from high engine bay temperatures, ensuring a cooler, denser oxygen charge for better combustion.

This kit is paired with a washable, reusable High-Flow Air Filter featuring K&N's signature oiled cotton filter media. The oversized conical design allows for up to 100,000 miles between filter services under normal highway driving conditions. The entire system is designed for a straightforward installation that can typically be completed in less than 90 minutes with basic hand tools.

• Manufacturer Part Number: 57-3514
• Tube Material: Rotationally-molded High-Density Polyethylene (HDPE)
• Filter Media: Oiled cotton gauze, washable and reusable
• Filter Style: Conical, oversized
• Installation Time: Approximately 90 minutes
• Warranty: K&N Million Mile Limited Warranty

Fits 2001-2004 Chevrolet Corvette models including Base, 50th Anniversary Edition, and Pace Car (V8-5.7L).

The K&N 57-3035 Performance Intake Kit is engineered to reduce intake restriction by replacing the restrictive factory air filter and intake housing. This system features a rotationally-molded high-density polyethylene (HDPE) intake tube designed to increase the volume of airflow to your engine. By streamlining the air path, this kit provides a tangible increase in horsepower and torque for the C5 Corvette.

This intake system includes a washable, reusable K&N High-Flow Air Filter made with oiled cotton media. Its oversized, conical design allows for extended service intervals, typically up to 100,000 miles under normal highway driving conditions. To ensure the engine breathes the coolest air possible, a custom-engineered heat shield isolates the filter from the high temperatures of the engine bay.

• Manufacturer Part Number: 57-3035
• Intake Tube Material: High-Density Polyethylene (HDPE)
• Filter Media: Oiled Cotton
• Service Interval: Up to 100,000 miles before cleaning is required
• Installation Time: Typically 90 minutes or less using factory mounting points
• Components Included: HDPE intake tube, oversized conical air filter, heat shield, and all necessary hardware

Fits 2005-2006 Pontiac GTO Base (6.0L V8).

The Volant Performance Pro 5 Closed Box Air Intake System is engineered to optimize airflow while protecting your engine from power-robbing heat. This system replaces the restrictive factory air box with a rugged, heat-shielded enclosure featuring an insulated metallic lid for easy filter access and maximum thermal protection. At its core is the Pro 5 filter, a high-performance 5-layer oiled cotton gauze filter that maximizes air volume without sacrificing filtration efficiency.

• Pro 5 Filter: Washable 5-layer oiled cotton gauze between aluminum screens for high flow and 98% efficiency.
• Heat Management: Rugged closed air box design shields the filter from ambient engine heat for cooler intake charges.
• Durable Components: Features high-quality stainless steel clamps and an insulated, easy-access lid.
• Maintenance: Reusable filter with extended service intervals up to 40,000 miles depending on driving conditions.
• Direct Bolt-On: Designed for a precise fit with a typical installation time of under one hour.
• CARB Approved: Emissions legal for street use.
• Manufacturer Part Number: 15860150

Fits 2002-2004 Ford Mustang GT (4.6L).

The K&N 69-3521TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube induction system designed to reduce intake restriction and provide a guaranteed increase in horsepower and torque. By replacing the restrictive factory air filter and intake housing, this system allows your engine to breathe more efficiently, resulting in improved throttle response and engine sound.

Each system features an oversized, conical High-Flow Air Filter with oiled cotton media, designed to capture contaminants while maintaining high airflow. The filter is washable and reusable, capable of going up to 100,000 miles between services under standard highway conditions. This kit includes a custom heat shield to isolate the filter from high engine bay temperatures, ensuring cooler, denser air enters the engine.

• Part Number: 69-3521TP
• Tube Material: Mandrel-bent polished aluminum
• Filter Type: Washable, reusable oiled cotton High-Flow Air Filter
• Includes custom heat shield and all necessary mounting hardware
• Installation: Typically completed in 90 minutes or less using basic hand tools
• Warranty: K&N Million Mile Limited Warranty

Fits 2015-2017 Ford Mustang GT, GT 50 Years Limited Edition, and GT Premium models equipped with the V8-5.0L engine.

The K&N 57-Series FIPK (Fuel Injection Performance Kit) is a cost-effective performance upgrade designed to replace the restrictive factory air box and intake tubing on your Mustang GT. This system utilizes a CAD-designed high-airflow intake tube to streamline air delivery to the engine, improving throttle response and engine sound. It features K&N's legendary oiled cotton gauze filter media, which provides superior filtration and air capacity for high-performance applications.

This intake is engineered for a precise fit using factory mounting points and can be installed in approximately 90 minutes with basic hand tools. The included High-Flow Air Filter is washable and reusable, capable of going up to 50,000 miles between services under standard highway driving conditions. This system is 50-state legal and maintains emissions compliance.

• Manufacturer Part Number: 57-2590
• Filter Material: Washable Oiled Cotton Gauze
• Service Interval: Up to 50,000 miles before cleaning (depending on conditions)
• Compliance: Legal in all 50 U.S. states
• Warranty: K&N 10-Year/Million Mile Limited Warranty
• Installation: Bolt-on design; typically installs in under 90 minutes

Fits 1994-1995 Ford Mustang GT, GTS, and SVT Cobra (V8-5.0L).

The K&N 57 Series FIPK (Fuel Injection Performance Kit) replaces the entire factory air intake assembly, including the restrictive air box and paper filter. Designed to reduce intake restriction and straighten airflow, this system allows your 5.0L V8 engine to inhale a larger volume of air for improved throttle response and acceleration. The oversized, cone-shaped high-flow air filter installs into the original air box space, directing air through the factory mass air sensor and into the throttle body.

• Direct replacement for the factory air intake housing and filter
• High-flow, washable/reusable air filter can go up to 100,000 miles between cleanings
• Bolts to factory mounting points; typical installation in 90 minutes or less
• Street legal in all 50 US states (CARB EO compliant)
• Backed by the K&N Million Mile Limited Warranty
• Manufacturer Part Number: 57-2511

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, and ZR1 (6.2L).

The CORSA Performance C7 carbon fiber air intake system replaces the restrictive factory airbox with a high-flow, thermally efficient housing designed for maximum performance. Constructed from 100% pure red carbon fiber, this intake combines lightweight structural rigidity with a premium aesthetic. The optimized internal geometry is dyno-tuned to deliver gains of up to 15 HP and 15 lb-ft of torque on the LT1 engine without requiring an aftermarket ECU tune.

This kit features the DryTech non-oiled filter, providing high-capacity filtration and simplified maintenance. Each system includes a precision-machined black anodized aluminum MAF mounting bracket to ensure accurate sensor readings and factory-level fitment. Designed as a direct bolt-on solution, the intake can be installed in under an hour using the included premium hardware.

• Fits 2014-2019 Corvette Stingray, Grand Sport, and ZR1 models
• 100% pure red carbon fiber construction for superior heat rejection
• DryTech non-oiled high-performance synthetic filter
• Machined black anodized aluminum MAF mounting bracket
• Estimated gains of up to 15 HP and 15 lb-ft TQ
• No ECU recalibration or tune required
• Direct bolt-on installation with all hardware included
• Manufacturer Part Number: 44001D-R
• Limited Lifetime Warranty (1-year filter warranty)

Fits 2017-2024 Chevrolet Camaro ZL1 (V8-6.2L).

The aFe Power Momentum GT Pro DRY S cold air intake system is engineered to maximize airflow and thermal efficiency for the supercharged V8-6.2L engine. This system features a unique, one-piece high-quality housing manufactured from heat-resistant cross-linked polyethylene (XLPE). The roto-molded design eliminates multiple components, ensuring a cool, dense intake charge while a built-in clear sight window allows for quick filter inspections without disassembling the airbox.

The system utilizes a CAD-designed, dyno-tuned intake tube to achieve optimized power gains while maintaining an OE-style fit. Filtration is handled by a massive 9-inch tall Pro DRY S air filter, featuring three layers of progressive synthetic media that provide maximum convenience without the need for filter oil. The filter uses a unique interface to the housing, reducing hardware count and simplifying maintenance.

• One-piece sealed black XLPE housing with auxiliary air inlet
• Pro DRY S 3-layer synthetic oil-free filter media for easy maintenance
• CAD-designed roto-molded intake tube for optimized airflow
• Includes premium stainless steel T-bolt clamps and silicone couplings
• No cutting or drilling required on factory components
• Manufacturer Part Number: 51-74214

Note: This intake system is not currently CARB exempt and is not legal for sale in California or use on vehicles registered with the California DMV.

Fits 2020-2026 Ford F-250 and F-350 Super Duty models (V8-6.7L).

The aFe POWER Momentum HD Cold Air Intake System is engineered to maximize airflow and filtration for the 6.7L Power Stroke. This system utilizes a massive 9-inch tall, 360-degree radial flow air filter featuring oil-free Pro DRY S media. With three layers of progressive synthetic media, it provides high filtration efficiency and dust-holding capacity without the need for recharge oils, making it ideal for street and towing applications. The filter's inverted top increases surface area for longer service intervals, while reinforced metal prevents filter collapse under high-torque demand.

The intake features a one-piece sealed housing made from heat-resistant, cross-linked polyethylene (XLPE) to protect the intake charge from engine bay heat soak. aFe POWER's patented filter-to-housing interface (US PAT 9440175) reduces the total number of parts for a streamlined installation and allows for easy filter maintenance. A clear sight window provides a hassle-free way to inspect the filter without disassembling the system. The housing is designed to integrate with factory air scoops and includes an auxiliary air inlet for additional volume when needed.

• Filter Media: Pro DRY S oil-free 3-layer synthetic media for maximum convenience.
• Housing Material: Durable, heat-soak resistant cross-linked polyethylene (XLPE).
• Patented Design: Filter-to-housing interface (US PAT 9440175) simplifies maintenance and installation.
• Filter Specs: 9" tall radial flow filter with a 5-3/4" flange and reinforced metal structure.
• Hardware Included: High-quality stainless-steel clamps and a durable silicone coupling.
• Manufacturer Part Number: 50-70007D-1

Fits 2024 Ford Mustang GT and Dark Horse models equipped with the 5.0L V8 engine.

The Roush Air Intake System is engineered to improve engine performance by reducing intake restriction and optimizing airflow into the 5.0L V8. This system replaces the restrictive factory air box with a high-flow design that provides a more direct path for cool, dense air to reach the throttle body. Designed for a precise fit, it utilizes factory mounting points for a straightforward installation that maintains underhood integrity.

• Direct-fit for 2024 Ford Mustang GT and Dark Horse (5.0L)
• Engineered to reduce intake pressure drop and improve airflow efficiency
• CAD-designed for a factory-quality fit and finish
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 422334

Fits select 2013-2025 Lexus GS350, RC300, and RC350 models (3.5L).

The Takeda Retain Stage-2 Intake System is engineered to optimize airflow and engine performance, delivering gains of up to 9 HP and 9 lbs. x ft. of torque. This system outflows the factory intake by 24%, utilizing a high-flow Pro 5R air filter with five layers of progressively finer medical-grade gauze media for maximum filtration and performance. The system features a one-piece powder-coated heat shield that isolates the filter from engine heat, ensuring a cooler, denser air charge.

• Pro 5R 5-layer washable/reusable performance air filter
• Mandrel-bent intake tubing maintains consistent diameters for smooth airflow
• One-piece heat shield requires no assembly and bolts to factory mounting points
• 3-angle adapter increases air velocity for improved throttle response
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: TR-2015B-1R

Fits 2016-2023 Toyota Tacoma (V6-3.5L).

The aFe Power Momentum GT Stage-2 cold air intake system is engineered using advanced CAD tools to provide a precise fit and maximum airflow for the 3.5L V6 Tacoma. This system features a unique one-piece sealed housing with a patent-pending filter-to-housing interface, which reduces the number of parts for a simpler installation and a secure seal. The housing includes a clear sight window for easy filter inspection and a tire-tread design top for a rugged, off-road aesthetic.

To ensure consistent performance, the system uses a dyno-tuned, rotomolded intake tube that replaces restrictive factory ducting. This kit is equipped with the Pro DRY S air filter, featuring three layers of oil-free synthetic media for high filtration efficiency and maximum convenience. It installs directly to factory mounting points without the need for drilling or cutting.

• Pro DRY S Filter: Three-layer oil-free synthetic media provides high airflow and easy cleaning.
• One-Piece Housing: Heat-resistant rotomolded housing protects the air charge from engine bay heat soak.
• Rotomolded Tube: CAD-designed intake tube maintains consistent diameters to optimize air velocity.
• Hassle-Free Install: Bolts directly to factory locations with all necessary premium hardware included.
• MPN: 51-76005

Fits select 1999-2006 Chevrolet Silverado 1500 and GMC Sierra 1500 (4.3L).

Engineer superior performance and engine protection into your GM truck with the Volant Pro5 Closed Box Air Intake System. This system (MPN 15843) is designed to replace the restrictive factory airbox with a rugged, sealed housing that shields the filter from engine heat and road debris, ensuring a cooler, denser air charge for improved throttle response and power.

At the core of this system is Volant’s Pro5 high-performance air filter. Featuring five layers of oiled cotton gauze pleated between a top and bottom aluminum screen, the Pro5 filter provides 98% filtration efficiency and a massive increase in flow over stock paper filters. The innovative smoked acrylic lid allows for effortless visual inspections of the filter condition without removing any hardware.

• Part Number: 15843
• Filter Media: Pro5 oiled 5-layer cotton gauze (washable and reusable)
• Thermal Protection: Rugged closed box design prevents heat soak
• Service Interval: Maintenance required only every 40,000 miles (depending on conditions)
• Easy Inspection: Includes a smoked acrylic see-through airbox lid
• Installation: Direct bolt-on design; installs in under one hour with basic tools
• Compliance: CARB Approved for emissions-legal performance

Fits 2022-2026 Hyundai Elantra N Base models. This Takeda Stage-2 cold air intake system is engineered to optimize airflow and thermal management for your Elantra N, utilizing a sealed housing design and high-performance filtration.

The system features a one-piece housing manufactured from heat-resistant cross-linked polyethylene (XLPE), which minimizes heat soak and includes a patent-pending filter-to-housing interface for a simplified, secure installation. A built-in clear sight window allows for quick filter inspections without requiring disassembly of the intake. The included Takeda Pro 5R air filter utilizes five layers of progressively finer cotton gauze media to provide maximum airflow for street and track applications.

• Pro 5R Filtration: 360-degree radial flow filter with 6-inch height, 4-1/2 inch flange, and inverted top for increased surface area.
• Durable Construction: Dyno-tuned XLPE intake tube and housing offer superior heat resistance and durability.
• Complete Hardware Kit: Includes stainless-steel clamps, reinforced silicone couplings, and billet aluminum fittings to accommodate factory connections.
• Quick Installation: Designed for a straightforward bolt-on process taking approximately 20 minutes with minimal hardware.
• Manufacturer Part Number: 56-10057R

This intake is compatible with the optional Takeda Turbo Inlet (PN 59-20002) to further reduce intake restrictions and smooth the transition from the intake tube to the turbocharger.

Fits 2014-2017 Infiniti QX80 (5.6L).

The aFe Power Momentum GT Stage-2 intake system is engineered to maximize airflow and performance for your vehicle. This system features a unique, one-piece roto-molded housing crafted from heat-resistant cross-linked polyethylene (XLPE), ensuring a cool intake charge. A built-in clear sight window allows for quick filter inspections without disassembling the air box. The CAD-designed, dyno-tuned intake tube includes an integrated resonance chamber to minimize unwanted intake noise while maintaining a precise fit.

At the core of this system is the Pro DRY S air filter, featuring three layers of progressively finer porosity synthetic media. This oil-free design offers maximum convenience and high filtration efficiency. The patent-pending housing-to-filter interface allows for a larger filter surface area, increasing air volume and simplifying installation. The filter is reinforced with metal to prevent collapse under high vacuum.

• Pro DRY S Filter: 9-inch oval 360-degree radial flow filter with oil-free 3-layer synthetic media
• One-Piece Sealed Housing: Heat-resistant black XLPE construction with auxiliary air scoop and urethane plug
• Durable Intake Tube: Roto-molded plastic with built-in resonance chamber
• Premium Hardware: Includes stainless steel clamps and a heavy-duty silicone coupling
• Easy Maintenance: Clear sight window for instant filter status checks
• Manufacturer Part Number: 51-76104

Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, and ZR1 models (6.2L).

The K&N 63-3081 AirCharger intake system is engineered to replace the restrictive factory air filter and intake housing, significantly reducing intake restriction to smooth and straighten airflow. This allows the 6.2L V8 engine to inhale a larger volume of air, providing usable power gains and improved acceleration throughout the RPM range.

This system features an ultra-lightweight, high-flow carbon fiber air filter and a specialized heat shield designed to fit into the original air box location. The aerodynamically engineered intake tube connects directly to the engine's throttle body and includes integrated mounting points for the factory mass air flow (MAF) sensor and crankcase vent hose. This kit is designed for a straightforward installation using existing factory mounting points, typically completed in 90 minutes or less with standard tools.

• Series: K&N AirCharger Performance
• MPN: 63-3081
• Filter Material: High-flow carbon fiber
• Service Interval: Filter lasts up to 100,000 miles before cleaning is required (depending on conditions)
• Warranty: K&N Million Mile Limited Warranty
• Emissions Note: Not legal for sale or use in California or states adopting California emissions standards

Fits 2023-2025 Ford F-150 Raptor (V8-5.2L Supercharged).

The aFe POWER Track Series intake system (MPN 57-10030K) is a performance-focused induction solution engineered to optimize airflow for the supercharged V8 Raptor. This system features a dyno-tuned, 100% carbon fiber intake tube that is lightweight, resists heat soak, and provides a smooth path for filtered air to reach the engine. The open-element design is housed in high-quality XLPE (cross-linked polyethylene) that utilizes the factory air inlet and an integrated scoop to capture cool air directly from the radiator support.

• High-Flow Black Pro 5R Filter: A 9-inch tall, 360-degree radial flow filter featuring five layers of pre-oiled progressively finer cotton gauze media for maximum performance.
• 100% Carbon Fiber Tube: Lightweight twill-weave carbon fiber construction (no fiberglass) designed to reduce weight and improve engine bay aesthetics.
• XLPE Open-Element Housing: Durable polymer housing minimizes warm engine air intake while delivering a more aggressive induction sound.
• Performance Hardware: Includes premium stainless-steel clamps and silicone couplings to ensure a secure, pressure-tight seal.
• Easy Installation: A direct bolt-on system that utilizes factory mounting locations with no cutting or drilling required.

Fits 2022-2026 Honda Civic LX, Sport, and Type R (2.0L).

The aFe Takeda Momentum Cold Air Intake System is engineered to optimize airflow and simplify maintenance for your Civic. Featuring a unique filter-to-housing interface, this system uses a one-piece sealed housing made from heat-resistant cross-linked polyethylene (XLPE). This design minimizes hardware for a straightforward bolt-on installation while protecting the intake charge from engine bay heat. A built-in clear sight window allows for quick filter inspections without disassembling the airbox.

The system includes a 9-inch tall, 360-degree radial flow Pro DRY S air filter. This oil-free, 3-layer synthetic media provides maximum convenience and excellent filtration efficiency for street use. The intake is completed with a dyno-tuned XLPE intake tube, high-quality stainless steel clamps, and a premium silicone coupler for a secure, durable seal under vacuum and heat.

• One-piece sealed XLPE housing with patent-pending filter-to-housing interface
• Pro DRY S oil-free 3-layer synthetic media air filter for easy maintenance
• 9" tall radial flow filter with 3.5" flange and inverted top for increased surface area
• Dyno-tuned XLPE intake tube ensures optimal air velocity and fitment
• Clear sight window for effortless filter monitoring
• Includes stainless steel clamps and premium silicone couplings
• Manufacturer Part Number: 56-70068D

Fits 2009-2017 Toyota Land Cruiser LC70 (V6-4.0L).

The aFe Power Momentum GT Pro 5R intake system is engineered to maximize airflow and filtration for the 4.0L V6 Toyota Land Cruiser. This system features a unique one-piece housing made from heat-resistant black cross-linked polyethylene (XLPE) that replaces the restrictive factory airbox. A built-in clear sight window allows for quick filter inspections without disassembling the housing, while an auxiliary air inlet provides additional airflow (includes a urethane plug for sealing when desired).

At the core of this system is the Pro 5R performance air filter. This large, 9-inch tall 360-degree radial flow filter features five layers of progressively finer mesh cotton gauze oiled media, providing maximum performance and protection. The CAD-designed, roto-molded intake tube is dyno-tuned to ensure optimal air velocity and a precise fit.

• Filter Media: 5-layer Pro 5R oiled cotton gauze for maximum airflow
• Housing Material: Durable black cross-linked polyethylene (XLPE)
• Filter Dimensions: 6-3/4" x 4-3/4" oval flange, 9" height with inverted top
• Installation: Direct bolt-on using premium hardware; no cutting or drilling required
• Interface: Patent-pending filter-to-housing interface for simplified installation
• MPN: 54-76008

Fits select 2006-2013 BMW 128i, 325i/xi, 328i/xi/xDrive, and 330i/xi (L6-3.0L) models.

Unlock horsepower and improved throttle response with the aFe POWER Magnum FORCE Stage-2 Cold Air Intake System. This system replaces your restrictive factory airbox with a high-flow, open-element design that increases airflow by up to 67%. It features a computer-designed, dyno-tuned intake tube made from heat-resistant cross-linked polyethylene (XLPE) for maximum durability and consistent performance. The innovative patent-pending filter-to-housing interface simplifies installation by reducing the number of components needed.

At the heart of this system is the 7-inch tall Pro DRY S air filter. This 360-degree radial flow filter uses three layers of oil-free synthetic media, providing high filtration efficiency and dust-holding capacity without the maintenance of oiled filters. The open-element housing allows for easy inspection while delivering an aggressive intake sound during acceleration. This kit is a direct bolt-on solution, connecting to factory air inlets and mounting points with no cutting or drilling required.

• Manufacturer Part Number: 54-13053D
• Dyno-Proven Gains: +9 HP and +8 Lbs. x Ft. Torque
• Flow Rate: 460 CFM @ 7" H2O
• Filter Media: Three-layer oil-free synthetic Pro DRY S
• Housing/Tube Material: Durable XLPE (Cross-linked Polyethylene)
• Installation: Uses factory mounting locations and throttle body bellows seal
• Compatible with 46-31011 throttle body spacer (sold separately)

Fits 2022-2025 Toyota Land Cruiser (J300) (V6-3.3L td).

The aFe Power Momentum sealed intake system is engineered to maximize airflow and filtration for the V6-3.3L turbo diesel engine. At the heart of this system is a 9-inch tall, 360-degree radial flow air filter featuring a 5-1/2" x 3-1/2" oval flange and an inverted top for increased surface area. This kit utilizes the oil-free Pro DRY S media, consisting of three layers of progressive synthetic material for high filtration efficiency and dust holding capacity without the need for oiling.

The one-piece housing is rotomolded from heat-resistant orange cross-linked polyethylene (XLPE) to resist heat soak and protect the intake charge. It includes a large, clear sight window for quick filter inspections without disassembly and an optional auxiliary air inlet for additional airflow. The system is completed with a computer-designed, dyno-tuned intake tube and a premium bellows silicone coupling that accommodates engine movement while maintaining a secure seal.

• Manufacturer Part Number: 50-70098DN
• Filter Type: Pro DRY S (Oil-Free, 3-Layer Synthetic Media)
• Housing Material: Heat-Resistant Orange Cross-Linked Polyethylene (XLPE)
• Filter Dimensions: 9" Tall with 5-1/2" x 3-1/2" Oval Flange
• Hardware: Stainless steel clamps and premium silicone bellows coupling included
• Installation: Bolt-on design requires approximately 30 minutes

Fits select 2019-2024 BMW (228i, X1, X2) and Mini (Cooper, Cooper Clubman, Cooper Countryman) models equipped with the L4-2.0L engine. This system is designed to provide maximum airflow and performance for both street and track use.

The aFe Power Momentum GT intake system features a 360-degree radial flow Pro 5R air filter. Standing 6-1/2 inches tall with a 3-1/2 inch round flange, this oiled filter utilizes five layers of progressively finer cotton gauze media for optimal filtration and flow. The system is encased in a one-piece, heat-resistant XLPE (cross-linked polyethylene) polymer housing. This durable material prevents heat soak and features a patent-pending filter-to-housing interface that reduces the total number of parts for a simpler, more secure installation.

Engineering details include a computer-designed, dyno-tuned intake tube that maintains a precise fit while maximizing power gains. A large, clear sight window is integrated into the housing for easy filter inspection without disassembly. The system bolts directly to factory mounting locations and is fully compatible with the factory strut bar.

• Manufacturer Part Number: 50-70068R
• Filter Media: Oiled Pro 5R (5-layer cotton gauze)
• Housing Material: Heat-resistant XLPE
• Filter Size: 6-1/2" tall, 3-1/2" flange
• Hardware Included: Stainless-steel worm clamps and premium bellows coupling
• Installation: Utilizes factory mounting locations; fits with factory strut bar

Fits select 2009-2013 Chevrolet Silverado 1500 and GMC Sierra 1500 (4.3L).

Upgrade your vehicle's induction system with the Volant Performance Cold Air Intake. This system is engineered to replace the restrictive factory airbox with a rugged, high-flow housing designed to shield the filter from engine bay heat. The intake features a 5-layer oiled cotton gauze filter that provides 98% filtration efficiency while significantly increasing airflow for improved throttle response and performance.

Constructed for durability both on and off-road, the airbox includes a smoked acrylic see-through lid for easy filter inspection without disassembly. The system is designed as a direct bolt-on replacement, utilizing factory mounting points for an installation that typically takes less than an hour. The reusable filter offers extended maintenance intervals of up to 40,000 miles depending on driving conditions.

• Manufacturer Part Number: 15043
• Filter Type: 5-layer oiled cotton gauze (washable/reusable)
• Housing: Fully enclosed airbox with smoked acrylic lid
• CARB Approved: Yes
• Installation: Bolt-on design; no cutting or drilling required
• Filtration Efficiency: 98%
• Maintenance Interval: Up to 40,000 miles between cleanings