Fits select 2003-2014 Nissan Frontier, Pathfinder, Titan, and Xterra models with the M226 rear differential.

Yukon Gear and Axle replacement pinion flanges are engineered to meet the demands of street, racing, and heavy-duty off-road applications. This round companion flange provides a direct-fit solution for the Nissan M226 (Dana 44 variant) rear axle, ensuring a secure connection between the driveshaft and the differential. Built for durability and precise fitment, it is an essential component for restoring driveline integrity or completing a gear swap.

• Style: Round companion flange
• Spline Count: 24-spline
• Differential Fitment: Nissan M226 Rear (Dana 44 variant)
• Manufacturer Part Number: YY NM226-RND-24
• Engineered for high-torque off-road and performance use

Fits select 1980-2014 Buick, Cadillac, Chevrolet, and GMC vehicles equipped with the GM 8.5" 10-bolt rear differential. This heavy-duty Yukon forged steel yoke is an essential upgrade for high-torque applications, replacing the factory cast yoke with a high-strength forged component designed to withstand the rigors of performance driving and heavy towing.

The YY GM8.5-1350-F is engineered for use with 1350 series U-joints, which provide a significant strength advantage over smaller factory joints. This yoke utilizes a 30-spline count and a secure U-bolt design (rather than weaker straps) to ensure maximum retention of the U-joint caps. The outside snap ring design and precision machining provide a perfect fit for 1.188-inch cap diameters.

• Manufacturer Part Number: YY GM8.5-1350-F
• Material: High-strength forged steel
• Spline Count: 30-Spline
• U-Joint Series: 1350
• Snap Ring Span: 3.625 inches
• Cap Diameter: 1.188 inches
• Design: Outside snap ring with U-bolt provision
• Warranty: 1-year manufacturer warranty against defects

Fits select 1980-2007 Buick, Chevrolet, and GMC vehicles equipped with a GM 8.5-inch differential.

The Yukon Gear Cast Pinion Yoke is engineered to provide a reliable connection between your driveshaft and differential. This yoke is designed specifically for the 1350 series u-joint, offering a significant strength upgrade over standard smaller u-joints. It features an outside snap ring design and utilizes a strap-style mounting system for secure installation. Each yoke is manufactured to precise tolerances to ensure proper fitment on 30-spline pinion shafts, helping to eliminate vibration and maintain drivetrain integrity.

• Manufacturer Part Number: YY GM8.5-1350-C
• Differential Fitment: GM 8.5-inch
• Spline Count: 30 Spline
• U-Joint Series: 1350
• Snap Ring Span: 3.625 inches
• Cap Diameter: 1.188 inches
• Snap Ring Design: Outside
• Attachment Style: Strap Style
• Material: High-quality cast steel
• Warranty: One-year warranty against manufacturing defects

Fits select 1964-1973 Chevrolet Bel Air, Biscayne, Camaro, Caprice, Chevelle, Chevy II, El Camino, Impala, Monte Carlo, and Nova (GM 8.2in).

This Yukon Gear pinion yoke is a precision-engineered replacement for GM 8.2-inch differentials. Designed for high-strength drivetrain applications, it utilizes a U-bolt style fastener for superior universal joint retention compared to standard strap-and-bolt configurations. This yoke is built to accept 1310 series U-joints, featuring an outside snap ring design specifically for classic GM axle setups.

• Manufacturer Part Number: YY GM8.2-1310-25
• Differential Compatibility: GM 8.2"
• Spline Count: 25-Spline
• U-Joint Series: 1310
• Mounting Style: U-Bolt
• Snap Ring Span: 3.219 in
• Cap Diameter: 1.062 in
• Design: Outside snap ring

Each Yukon yoke is backed by a one-year warranty against manufacturing defects, providing reliable performance for restorations and street builds alike.

Fits select 1972-2005 Buick, Chevrolet, GMC, Isuzu, Oldsmobile, and Pontiac vehicles with GM 7.5-inch and 7.625-inch differentials.

This Yukon Gear & Axle pinion yoke is a high-strength replacement designed to meet or exceed factory tolerances for GM 7.5" and 7.625" rear ends. Engineered for 27-spline pinion shafts, it features a Mechanics 3R u-joint configuration and a triple lip design for superior sealing. This strap-style yoke is built for inside snap ring applications, ensuring a secure and precise connection for your drivetrain components.

• Manufacturer Part Number: YY GM40015850
• Pinion Spline Count: 27
• U-Joint Series: Mechanics 3R (Mech 3R)
• U-Joint Cap Diameter: 1.125 inches
• Snap Ring Span: 2.556 inches (Inside)
• Attachment Style: Strap Style
• Design: Triple Lip Design
• Warranty: One-year warranty against manufacturing defects

Fits select 1963-1987 Buick, Chevrolet, GMC, and Pontiac vehicles equipped with the GM 12-bolt car or truck differential. This Yukon Gear pinion yoke is engineered for 1310 series u-joints and utilizes a robust U-bolt design, offering a secure and durable connection for your drivetrain.

Precision-machined to ensure proper alignment and balance, this 30-spline yoke replaces worn or damaged factory components. The U-bolt style is often preferred for performance and off-road applications as it provides a more positive retention of the u-joint caps compared to standard strap-and-bolt configurations. All Yukon yokes are backed by a one-year warranty against manufacturing defects.

• Manufacturer Part Number: YY GM3878972
• Differential Fitment: GM 12-Bolt (Car & Truck)
• Spline Count: 30
• U-Joint Series: 1310
• Design: U-Bolt Style
• Cap Diameter: 1.062 in.
• Snap Ring Span: 3.219 in. (Outside Snap Ring)

Fits select 1967-2015 Chevrolet and GMC trucks, SUVs, and vans equipped with GM 10.5-inch or 11.5-inch 14-bolt rear axles.

The Yukon Gear YY GM26060977 adapter sleeve is a specialized solution for upgrading GM heavy-duty yokes to utilize modern triple lip pinion seals. This precision-machined sleeve installs onto the yoke to provide a fresh, smooth sealing surface, which is critical when the original yoke surface has become grooved or worn over time. By converting to a triple-lip seal design, you enhance the axle's protection against dirt, water, and debris while ensuring a superior oil-tight seal for the differential.

• Converts GM 10.5" and 11.5" 14-bolt truck yokes to triple lip seal compatibility
• Provides a precision-ground sealing surface to restore worn yokes
• Enhances durability in heavy-duty towing and off-road applications
• Direct fit for Chevrolet/GMC 14-bolt 10.5" and 11.5" axle configurations
• Manufacturer Part Number: YY GM26060977

Fits select 1980-2014 Buick, Cadillac, Chevrolet, and GMC vehicles with 8.6-inch and 9.5-inch differentials.

The Yukon Gear YY GM26060975 Adapter Sleeve is engineered to adapt standard pinion yokes to accept late-model triple lip pinion seals. This sleeve provides a precision-fit sealing surface, allowing owners of older GM 8.6" and 9.5" rear ends to take advantage of the superior fluid retention and debris exclusion offered by modern triple-lip seal technology.

• Adapts standard yokes for use with late-model triple lip pinion seals
• Compatible with GM 8.6-inch and 9.5-inch differential applications
• Ensures a leak-free seal between the yoke and housing
• Precision-manufactured for exact fitment on factory and performance yokes
• Manufacturer Part Number: YY GM26060975