Fits 1963-1979 Chevrolet Corvette (Base, Stingray, Silver Anniversary Edition, and Indianapolis 500 Pace Car).

The Yukon Gear Inner Stub Side Flange Yoke is a precision-engineered replacement for worn or damaged factory side yokes in C2 and C3 Corvette rear differentials. Over decades of service, original yokes often develop excessive play or wear at the splines and bearing surfaces, leading to driveline vibrations and poor power transfer. This yoke restores driveline integrity and ensures smooth operation, whether for a factory restoration or a high-performance street application.

• Component Type: Inner Stub Side Flange Yoke
• Manufacturer Part Number: YY GM3872922
• Replaces worn OE side yokes for improved driveline stability
• Engineered for high-strength durability and precise fitment
• Compatible with factory-style differential assemblies

Fits select 1979-2019 Toyota 4Runner, Pickup, Tacoma, FJ Cruiser, and Lexus GX470 with a V6 rear differential.

The Yukon Gear & Axle YY T35040-29-KIT is a heavy-duty pinion yoke conversion kit engineered for Toyota V6 rear differentials utilizing a 29-spline pinion. Whether you are performing a gear swap, repairing a damaged driveline connection, or upgrading to a stronger pinion configuration, this kit provides the essential hardware required for a professional installation. Constructed for durability in street, racing, and demanding off-road applications, this yoke ensures proper driveshaft alignment and torque transfer.

• Designed for Toyota V6 Rear applications with a 29-spline pinion
• Complete kit simplifies installation and ensures component compatibility
• Includes heavy-duty pinion yoke, matched pinion seal, and pinion nut
• Engineered to meet or exceed OE specifications for fit and finish
• Manufacturer Part Number: YY T35040-29-KIT

Fits select 1979-2018 Toyota Pickup, 4Runner, Tacoma, FJ Cruiser, and Lexus GX470 with V6 rear differentials. This Yukon Gear and Axle pinion yoke is engineered as a high-strength replacement or conversion component for 29-spline gear sets.

Built to handle the demands of street, racing, and heavy-duty off-road use, this yoke ensures precise fitment and drivetrain reliability. It is specifically designed to accommodate 29-spline pinion shafts, providing a critical upgrade or repair solution for Toyota V6 rear differential assemblies.

• Manufacturer Part Number: YY T35040-29
• Pinion Spline Count: 29
• Differential Fitment: Toyota V6 Rear
• Application: Replacement or conversion yoke

This Yukon Gear & Axle pinion yoke (YY T34010) fits select 1993-2015 Toyota Tacoma, T100, Tundra, and Sequoia models. Engineered as a robust replacement for worn or damaged original equipment, this yoke is designed to handle the demands of daily driving, racing, and heavy-duty off-road use.

Constructed to exacting tolerances, this 30-spline yoke ensures a precise fit to the pinion shaft and maintains proper driveline balance to prevent vibration and premature seal wear. It features the common 60mm x 60mm bolt pattern found on many Toyota 8-inch and 8.4-inch differential configurations, providing a reliable connection for your u-joint and driveshaft assembly.

• Manufacturer Part Number: YY T34010
• Spline Count: 30
• Bolt Pattern: 60mm x 60mm
• Application: Pinion yoke for Toyota differentials
• Compatibility: Fits select 1993-2015 Toyota T100, Tacoma, Tundra, and Sequoia

Fits select 1960-2010 AMC, Chevrolet, Chrysler, Dodge, Ford, and GMC vehicles (5.9L) equipped with Dana 30, Dana 44, AMC Model 35, or Chrysler 9.25-inch differentials.

The Yukon Gear & Axle U-Joint Strap Kit provides the essential hardware needed to secure your universal joint to the pinion yoke. Over time, factory straps can stretch, fatigue, or become damaged during service, leading to driveline vibrations or catastrophic failure. This kit is a direct-replacement solution designed to maintain high clamping force in street, racing, and heavy-duty off-road applications.

Engineered for versatility, this kit is compatible with both 1310 and 1330 series u-joints. Each kit includes two precision-formed straps and four mounting bolts, providing a complete refresh for a single yoke assembly.

• Replaces worn or stretched OE pinion yoke straps
• Fits Dana Spicer 30, Dana Spicer 44, AMC Model 35, and Chrysler 9.25" differentials
• Compatible with 1310 and 1330 series u-joint sizes
• Includes two (2) heavy-duty straps and four (4) mounting bolts
• Manufacturer Part Number: YY STR-004

Secure your drivetrain components with the Yukon Gear and Axle YY STR-002 u-joint strap kit. This kit is engineered to provide reliable retention for high-torque applications, ranging from heavy-duty off-roading to performance street use. It is specifically designed to fit 1350 and 1410 series u-joints on yokes for Dana 60, Dana 70, Ford 10.25-inch, and GM 9.5-inch differentials.

Fits select 1980-2017 Chevrolet, Ford, Dodge, and Cadillac vehicles, including 1/2-ton to 1-ton trucks and SUVs equipped with the specified axle yokes. This kit replaces worn or stretched factory hardware to prevent joint movement and potential driveline failure.

• Fits U-Joint Sizes: 1350 and 1410
• Compatible Axle Housings: Dana Spicer 60, 70, 70U, 70HD, Ford 10.25 in., and GM 9.5 in.
• Includes two (2) high-strength straps
• Includes four (4) precision-threaded mounting bolts
• Manufacturer Part Number: YY STR-002

This Yukon Gear & Axle replacement transfer case yoke is engineered specifically for the New Process 205 (NP205) transfer case. Built to handle high-torque applications, this yoke allows you to adapt or repair your drivetrain with a heavy-duty 1410 series u-joint interface.

The YY NP205-141032 is manufactured with precision to ensure a secure fit on 32-spline output shafts. Whether you are performing a custom swap or replacing a worn factory component, this yoke provides the durability required for off-road and performance use, maintaining proper driveline alignment and reducing vibration.

• Fits New Process 205 (NP205) transfer cases
• 32-spline internal count
• Designed for 1410 series u-joints
• 4.188 in. snap ring span
• 1.188 in. cap diameter
• Manufacturer Part Number: YY NP205-141032

Fits select 1980-2014 Buick, Cadillac, Chevrolet, and GMC vehicles equipped with the GM 8.5" 10-bolt rear differential. This heavy-duty Yukon forged steel yoke is an essential upgrade for high-torque applications, replacing the factory cast yoke with a high-strength forged component designed to withstand the rigors of performance driving and heavy towing.

The YY GM8.5-1350-F is engineered for use with 1350 series U-joints, which provide a significant strength advantage over smaller factory joints. This yoke utilizes a 30-spline count and a secure U-bolt design (rather than weaker straps) to ensure maximum retention of the U-joint caps. The outside snap ring design and precision machining provide a perfect fit for 1.188-inch cap diameters.

• Manufacturer Part Number: YY GM8.5-1350-F
• Material: High-strength forged steel
• Spline Count: 30-Spline
• U-Joint Series: 1350
• Snap Ring Span: 3.625 inches
• Cap Diameter: 1.188 inches
• Design: Outside snap ring with U-bolt provision
• Warranty: 1-year manufacturer warranty against defects

Fits select 1980-2007 Buick, Chevrolet, and GMC vehicles equipped with a GM 8.5-inch differential.

The Yukon Gear Cast Pinion Yoke is engineered to provide a reliable connection between your driveshaft and differential. This yoke is designed specifically for the 1350 series u-joint, offering a significant strength upgrade over standard smaller u-joints. It features an outside snap ring design and utilizes a strap-style mounting system for secure installation. Each yoke is manufactured to precise tolerances to ensure proper fitment on 30-spline pinion shafts, helping to eliminate vibration and maintain drivetrain integrity.

• Manufacturer Part Number: YY GM8.5-1350-C
• Differential Fitment: GM 8.5-inch
• Spline Count: 30 Spline
• U-Joint Series: 1350
• Snap Ring Span: 3.625 inches
• Cap Diameter: 1.188 inches
• Snap Ring Design: Outside
• Attachment Style: Strap Style
• Material: High-quality cast steel
• Warranty: One-year warranty against manufacturing defects

Fits select 1964-1973 Chevrolet Bel Air, Biscayne, Camaro, Caprice, Chevelle, Chevy II, El Camino, Impala, Monte Carlo, and Nova (GM 8.2in).

This Yukon Gear pinion yoke is a precision-engineered replacement for GM 8.2-inch differentials. Designed for high-strength drivetrain applications, it utilizes a U-bolt style fastener for superior universal joint retention compared to standard strap-and-bolt configurations. This yoke is built to accept 1310 series U-joints, featuring an outside snap ring design specifically for classic GM axle setups.

• Manufacturer Part Number: YY GM8.2-1310-25
• Differential Compatibility: GM 8.2"
• Spline Count: 25-Spline
• U-Joint Series: 1310
• Mounting Style: U-Bolt
• Snap Ring Span: 3.219 in
• Cap Diameter: 1.062 in
• Design: Outside snap ring

Each Yukon yoke is backed by a one-year warranty against manufacturing defects, providing reliable performance for restorations and street builds alike.

Fits select 1972-2005 Buick, Chevrolet, GMC, Isuzu, Oldsmobile, and Pontiac vehicles with GM 7.5-inch and 7.625-inch differentials.

This Yukon Gear & Axle pinion yoke is a high-strength replacement designed to meet or exceed factory tolerances for GM 7.5" and 7.625" rear ends. Engineered for 27-spline pinion shafts, it features a Mechanics 3R u-joint configuration and a triple lip design for superior sealing. This strap-style yoke is built for inside snap ring applications, ensuring a secure and precise connection for your drivetrain components.

• Manufacturer Part Number: YY GM40015850
• Pinion Spline Count: 27
• U-Joint Series: Mechanics 3R (Mech 3R)
• U-Joint Cap Diameter: 1.125 inches
• Snap Ring Span: 2.556 inches (Inside)
• Attachment Style: Strap Style
• Design: Triple Lip Design
• Warranty: One-year warranty against manufacturing defects

Fits select 1963-1987 Buick, Chevrolet, GMC, and Pontiac vehicles equipped with the GM 12-bolt car or truck differential. This Yukon Gear pinion yoke is engineered for 1310 series u-joints and utilizes a robust U-bolt design, offering a secure and durable connection for your drivetrain.

Precision-machined to ensure proper alignment and balance, this 30-spline yoke replaces worn or damaged factory components. The U-bolt style is often preferred for performance and off-road applications as it provides a more positive retention of the u-joint caps compared to standard strap-and-bolt configurations. All Yukon yokes are backed by a one-year warranty against manufacturing defects.

• Manufacturer Part Number: YY GM3878972
• Differential Fitment: GM 12-Bolt (Car & Truck)
• Spline Count: 30
• U-Joint Series: 1310
• Design: U-Bolt Style
• Cap Diameter: 1.062 in.
• Snap Ring Span: 3.219 in. (Outside Snap Ring)