Ensure a reliable, leak-free seal for your performance exhaust system with this HKS 75mm Universal Exhaust Gasket set. Engineered to withstand the extreme thermal stress and high-frequency vibration common in modified vehicles, these gaskets provide a durable interface between exhaust flanges.

Ideal for custom fabrication or as replacement components for HKS exhaust systems, these 75mm (approximately 3-inch) gaskets are designed for standard 2-bolt flange configurations. The high-quality construction helps prevent common exhaust leaks that can lead to power loss, inaccurate sensor readings, and unwanted cabin drone.

• Bore Diameter: 75mm
• Configuration: 2-Bolt Flange
• Quantity: Set of 2 gaskets
• Construction: High-temperature resistant composite
• Manufacturer Part Number: 34001-AK004

Ensure a leak-free seal for your custom or aftermarket exhaust system with this pair of HKS 65mm Universal Exhaust Gaskets. Engineered for high-temperature environments, these gaskets provide the durability required to maintain exhaust velocity and prevent performance-robbing leaks at the flange connections.

This 2-piece set is designed for universal applications featuring a 65mm (approximately 2.5-inch) inner diameter. Whether you are replacing worn components or installing a new HKS exhaust component, these gaskets offer the precise fitment and reliability expected from HKS engineering.

• Product Type: Universal Exhaust Gasket
• Bore Size: 65mm
• Quantity: Set of 2
• Manufacturer Part Number: 34001-AK003

Ensure a secure, leak-free seal between your exhaust components with the HKS Universal EX Gasket set. These 60mm gaskets are engineered to withstand the extreme thermal cycling and high temperatures found in performance exhaust systems, preventing power-robbing leaks and maintaining optimal backpressure.

Suitable for custom fabrication or as replacement gaskets for HKS exhaust systems, these components feature a precision-cut design for a consistent fit across standard 2-bolt flanges. Whether you are bolting up a high-flow catalytic converter, a mid-pipe, or a muffler, these gaskets provide the durability required for both street and track applications.

• Brand: HKS
• Series: Universal EX
• Component: Exhaust Gasket
• Bore Size: 60mm
• Quantity: Set of 2
• Manufacturer Part Number: 34001-AK002

Ensure a leak-free seal for your high-performance engine with the HKS Exhaust Manifold Gasket, designed specifically for the Nissan RB26DETT. This precision-engineered gasket (MPN: 23009-AK003) is built to withstand the extreme heat and pressure cycles typical of turbocharged inline-six setups.

• Direct replacement for the factory exhaust manifold gasket on RB26DETT engines.
• Engineered for superior thermal resistance and durability under high-boost conditions.
• Critical for maintaining exhaust velocity and turbocharger efficiency by preventing pre-turbo exhaust leaks.
• Manufactured by HKS to exacting tolerances for a perfect fit against the cylinder head ports.

Whether you are performing a routine service or a complete manifold upgrade on a Nissan Skyline GT-R, using a reliable gasket is essential for optimal engine performance and turbo response. Manufacturer Part Number: 23009-AK003.

Fits 2011-2023 Ford Mustang and 2011-2017 Ford F-150 (5.0L).

Ensure a reliable, leak-free seal when installing aftermarket headers or reinstalling factory manifolds with the Ford Racing Exhaust Manifold Gasket and Hardware Kit. These components are manufactured to original equipment specifications and tolerances, providing a precise fit and superior durability under high thermal stress. Whether you are performing a header swap or a complete engine service, this kit provides the professional-grade hardware needed to secure the exhaust system properly.

• Manufactured to exact stock specifications for a perfect seal
• Designed specifically for the 5.0L Coyote engine architecture
• Complete kit includes required gaskets and mounting hardware
• Proudly made in the USA
• Manufacturer Part Number: M-9448-M50

Fits select 1990-2020 Subaru (Impreza, WRX, STI, Forester, Legacy, Outback, Ascent, BRZ, Baja), 2005-2006 Saab 9-2X, 2013-2016 Scion FR-S, and 2017-2020 Toyota 86.

Fel-Pro MS95088 exhaust manifold gaskets are engineered for the real-world repair environment, specifically designed to provide a reliable seal even on imperfect or warped sealing surfaces. Utilizing proprietary materials and application-specific designs, these gaskets ensure a precise fit and long-lasting performance to prevent exhaust leaks and maintain system pressure.

• Complete gasket set includes all necessary seals for exhaust manifold removal and replacement
• Proprietary materials conform to surface irregularities for a superior seal
• Meets or exceeds all original equipment (OE) specifications for fit and durability
• Validated for fit, form, and function by Fel-Pro engineers
• Designed to withstand extreme thermal cycling and high exhaust temperatures
• Manufacturer Part Number: MS95088

Fits select 1990-2001 Acura Integra, Honda Civic Si, Civic del Sol, and CR-V.

The Fel-Pro MS94602 Exhaust Manifold Gasket Set is engineered specifically for the real-world repair environment, where sealing surfaces may no longer be perfectly smooth. This application-specific set provides all the necessary gaskets and seals required to complete a full exhaust manifold removal and replacement. Utilizing proprietary materials and advanced engineering, these gaskets compensate for surface irregularities to deliver a reliable, leak-free seal that meets or exceeds all original equipment specifications.

• Complete Solution: Includes all gaskets and seals necessary for exhaust manifold service.
• Repair-Focused Engineering: Specifically designed to seal imperfect or warped surfaces found in high-mileage vehicles.
• Validated Performance: Tested for fit, form, and function to ensure a precise installation and long-term durability.
• Proprietary Materials: Manufactured with high-quality materials to withstand the extreme thermal cycling of the exhaust system.
• Manufacturer Part Number: MS94602

Fits 1988-1994 Mazda 323, Miata, and Mercury Capri.

The Fel-Pro MS94532 Exhaust Manifold Gasket Set is engineered for the rigors of the real-world repair environment. Recognizing that sealing surfaces on high-mileage engines are rarely perfect, Fel-Pro utilizes proprietary materials and application-specific designs to ensure a reliable, leak-free seal. This set provides a professional-grade solution for technicians and DIYers addressing exhaust leaks or performing manifold maintenance.

• Includes all necessary gaskets and seals for a complete exhaust manifold removal and replacement.
• Specifically engineered for imperfect or warped sealing surfaces common in high-heat applications.
• Meets or exceeds all original equipment (OE) specifications for fit, form, and function.
• Validated for durability under extreme thermal cycling and high-pressure exhaust conditions.
• Manufacturer Part Number: MS94532

Fits select 1997-2020 Chevrolet, GMC, Cadillac, Buick, Hummer, Isuzu, Pontiac, Saab, and Workhorse models.

The Fel-Pro MS92467 Exhaust Manifold Gasket Set is engineered for the rigors of the real-world repair environment. Unlike standard gaskets that require pristine surfaces, Fel-Pro gaskets are designed to compensate for imperfect sealing surfaces common in high-mileage exhaust systems where heat cycling can warp manifolds or pit cylinder head faces. This set provides the reliable, leak-free seal necessary to maintain proper exhaust flow and engine performance.

• Complete set containing all gaskets and seals required for exhaust manifold removal and replacement.
• Manufactured with proprietary materials to ensure a durable seal against warped or worn surfaces.
• Application-specific design ensures a precise fit for a wide range of GM engine platforms.
• Meets or exceeds original equipment specifications for temperature resistance and durability.
• Validated for fit, form, and function to ensure straightforward installation.
• Manufacturer Part Number: MS92467

Fits select 2013-2022 Subaru Ascent, BRZ, Forester, Legacy, Outback, WRX, and WRX STI, Scion FR-S, and Toyota 86.

Fel-Pro 61837 gaskets are engineered specifically for the aftermarket repair environment, where sealing surfaces are often warped, pitted, or otherwise imperfect. This exhaust pipe flange gasket provides a dependable, high-temperature seal for critical exhaust joints, preventing leaks that can lead to excessive noise, cabin odors, or check engine lights. Built to meet or exceed original equipment specifications, it ensures a factory-level fit during installation.

• Manufacturer Part Number: 61837
• Application-Specific Design: Precision-fit for factory exhaust flanges on listed Subaru and Toyota models.
• Repair Focused: Proprietary materials designed to seal on imperfect surfaces that standard gaskets might miss.
• OEM Performance: Validated for fit, form, and function to match or improve upon OE reliability.
• Installation-Ready: Engineered for straightforward replacement of worn or blown-out factory flange gaskets.

Fits select 1990-2021 Subaru (Impreza, WRX STI, Legacy, Forester, Outback, Baja) and 2005-2006 Saab 9-2X.

The Fel-Pro 60957 Exhaust Pipe Flange Gasket is engineered to deliver a reliable, long-lasting seal in real-world repair environments. Unlike standard gaskets designed for brand-new components, Fel-Pro gaskets are specifically optimized for imperfect sealing surfaces. Manufactured with proprietary materials, this gasket compensates for minor flange irregularities to prevent exhaust leaks and maintain system pressure.

• Engineered for Repair: Specialized materials provide a superior seal on slightly worn or pitted exhaust flanges.
• Application Specific: Designed for exact fitment on Subaru and Saab exhaust systems to ensure proper alignment and bolt-on installation.
• OEM Performance: Meets or exceeds all original equipment specifications for thermal resistance and durability.
• Validated Quality: Extensively tested for fit, form, and function to provide unsurpassed sealing reliability.
• Part Number: 60957

Fits Ford 260, 289, 302, and 351W Windsor engines.

The Fel-Pro 1487 Performance Exhaust Header Gasket Set is engineered specifically for the repair environment to provide a reliable seal even on imperfect sealing surfaces. Constructed with a high-density fiber facing material bonded to both sides of a perforated steel core, these gaskets are significantly stronger than standard paper alternatives. This heavy-duty build provides maximum resistance to blowout and burnout from high-temperature exhaust gases.

These gaskets feature an anti-stick coating that allows for necessary motion without damaging the gasket while making removal much cleaner during future service. Designed with the Installers Advantage, the slotted bolt holes allow for easier header installation by enabling you to start the bolts before sliding the gasket into place.

• Manufacturer Part Number: 1487
• Port Dimensions: 1.42 in. x 1.62 in.
• Material: Perforated steel core with high-density fiber facing
• Finish: Anti-stick coating for thermal motion and easy removal
• Features: Slotted bolt holes for simplified installation
• Note: Not intended for use in emission-controlled vehicles

Fits Chevrolet Big Block engines (396, 402, 427, 454, and 502 CID).

The Fel-Pro 1412 Performance Exhaust Header Gasket Set is engineered specifically for the repair environment, providing a reliable seal on imperfect surfaces where standard gaskets often fail. These gaskets feature a high-density fiber facing material bonded to both sides of a perforated steel core, offering structural integrity and resistance to blowout or burnout caused by high-temperature exhaust gases.

• Steel Core Strength: The perforated steel core is far stronger than basic paper gaskets, ensuring long-term durability in high-heat applications.
• Anti-Stick Coating: A proprietary coating permits thermal movement without damaging the gasket and ensures easier removal during future engine service.
• 2.13-inch Ports: Sized specifically for performance Big Block Chevy cylinder heads and headers.
• Installer’s Advantage: Slotted bolt holes allow for easier header installation and alignment in tight engine bays.
• Part Number: 1412

Note: These gaskets are not intended for use in emission-controlled vehicles.

Fits 2005-2010 Chrysler 300 C SRT8, Dodge Challenger, Charger, and Magnum SRT8, and Jeep Grand Cherokee SRT8 (6.1L).

Cometic Multi-Layer Steel (MLS) exhaust manifold gaskets are engineered for high-output environments where traditional composite gaskets fail. These gaskets feature a multi-layer stainless steel construction that provides exceptional rebound and resistance to the shearing forces created by different cylinder head and manifold expansion rates. The outer layers are embossed and coated with Viton, a heat-resistant fluoroelastomer rated to 250°C (482°F), ensuring a reliable seal across various surface finishes and load conditions without the need for additional sealants.

• Maintains a precise torque set and will not burn through or push out
• Stainless steel layers resist corrosion and provide superior strength
• Viton coating handles harsh sealing environments and high temperatures
• Port Dimensions: 2.082" x 1.508"
• Thickness: .030"
• Manufacturer Part Number: C5872-030

Fits 1999-2005 Dodge Viper and Ram 1500 SRT-10 models.

The Cometic Armor Clad MSL Gen III exhaust gasket is engineered for high-performance applications where extreme heat and sealing reliability are critical. Specifically designed to withstand temperatures up to 2,000°F, this .030-inch thick gasket is compressible enough to seal less-than-perfect surfaces on cylinder heads and exhaust manifolds. The robust construction ensures it will not burn through or push out under high-pressure conditions while maintaining a consistent torque set.

• Manufacturer Part Number: C5865-030
• Thickness: .030 inch
• Material: Armor Clad MSL (Multi-Layer Steel) Gen III
• Temperature Rating: Up to 2,000°F
• Compatible with varying cylinder head and manifold material combinations
• Corrosion resistant finish for long-term durability

Fits select 1991-2005 Ford, Lincoln, and Mercury vehicles equipped with 4.6L SOHC or 5.4L Triton engines.

Engineered for high-performance sealing, Cometic MLS (Multi-Layer Steel) exhaust gaskets provide a superior solution for engines facing extreme cylinder pressures. These gaskets feature multiple layers of embossed stainless steel to maintain a precise torque set and resist the common burn-through or push-out issues seen with traditional composite materials. The center shim layer allows for a precise .030-inch thickness that compensates for surface variations while requiring less clamp load, which helps minimize bore distortion during installation.

• Manufactured from high-grade stainless steel for maximum corrosion resistance
• Embossed outer layers provide a reliable seal across various manifold and head surface finishes
• Dry-seal technology requires no additional sealants or RTV for installation
• Thickness: .030 inch
• Quantity: One pair of exhaust manifold gaskets
• Manufacturer Part Number: C5853-030

Fits 1998-2003 Dodge Viper models including ACR, GT2, GTS, R/T-10, and SRT-10.

This Cometic Multi-Layer Steel (MLS) exhaust gasket is engineered to handle the extreme cylinder pressures and high temperatures generated by the Viper's high-output V10. Designed as a high-performance alternative to standard seals, this .030" thick gasket utilizes advanced materials to maintain a reliable exhaust seal under harsh load conditions without the need for additional liquid sealants.

• Multi-Layer Steel Construction: Features embossed outer layers that conform to surface finishes and distribute clamp loads evenly across the sealing area.
• Stainless Steel Shim: The center layer consists of an uncoated stainless steel shim for precise thickness and structural stability.
• Bore Integrity: Engineered to require less clamp load than traditional gaskets, helping to minimize bore distortion while maintaining a superior seal.
• American Made: Proudly manufactured in the USA using high-grade materials for maximum durability.
• Part Number: C5825-030

Fits 1998-2008 Dodge Ram 2500 and 3500 (5.9L).

Cometic MLS (Multi-Layer Steel) exhaust gaskets are engineered to handle the extreme cylinder pressures and high temperatures common in heavy-duty Cummins applications. These gaskets feature embossed outer layers designed to meet the demands of harsh sealing environments, ensuring a reliable seal even under varying load conditions and surface finishes.

The construction includes an uncoated stainless steel center shim layer that allows for precise thickness requirements while maintaining a superior torque set compared to composite alternatives. Because these gaskets conform to load distribution across the sealing area, they require less clamp load, which helps reduce bore distortion. No additional sealants are required for installation.

• Manufacturer Part Number: C5726-040
• Material: Multi-Layer Steel (MLS)
• Thickness: .040 inch
• Configuration: Two 3-port gaskets (covers 6 ports total)
• Resists corrosion and burn-through
• Maintains torque set without retightening
• Requires no sealants

Fits 1992-1998 Dodge Viper models including Base, GT2, GTS, and R/T-10.

Cometic C5679-030 MLS (Multi-Layer Steel) header gaskets are engineered for the extreme thermal demands of high-performance exhaust systems. Featuring Cometic’s proprietary Armor Clad technology, these gaskets can withstand temperatures up to 2000F while remaining compressible enough to seal against less-than-perfect flange surfaces. The embossed outer layers ensure a reliable seal under harsh load conditions, while the uncoated stainless steel shim layer provides structural integrity and consistent load distribution across the sealing area.

• High-temperature Armor Clad construction resists up to 2000F
• Multi-Layer Steel (MLS) design with embossed outer layers for harsh environments
• Compressible material creates a superior seal on imperfect surfaces
• Requires less clamp load to minimize potential bore distortion
• Uncoated stainless steel shim center layer
• Manufacturer Part Number: C5679-030
• Includes one pair of exhaust header gaskets

Vehicle Fitment

Fits select 2011-2023 Ford Mustang and F-150 (5.0L).

Cometic HTS (High Temperature Soft) exhaust gaskets are engineered to provide a superior, high-heat seal for the Ford 5.0L Coyote engine, whether you are running factory exhaust manifolds or aftermarket long-tube headers. At .060-inch thickness, these gaskets are specifically designed to conform to surface irregularities, effectively preventing the exhaust leaks commonly found with thinner or lower-quality gaskets.

Built for extreme durability, the facing material is composed of 75% graphite reinforced with Kevlar fibers. This robust construction ensures the gaskets maintain their integrity under high exhaust temperatures and vibration without the need for messy RTV or liquid sealants during installation.

• Product Line: Cometic HTS (High Temperature Soft)
• Engine Compatibility: Ford 5.0L Gen-1 Coyote
• Material: 75% Graphite with Kevlar fiber reinforcement
• Thickness: .060 inch
• Quantity: Pair (2 gaskets included)
• Requirement: No sealants required
• Manufacturer Part Number: C5392HTS

Fits select 2011-2023 Ford F-150 and Mustang (5.0L).

Cometic MLS (Multi-Layer Steel) exhaust gaskets are engineered to handle the extreme cylinder pressures and thermal expansion typical of high-performance Ford 5.0L Coyote engines. These gaskets feature a three-layer design with embossed outer layers that provide a reliable seal even on less-than-perfect mating surfaces. The center shim layer is constructed from uncoated stainless steel, ensuring the gaskets maintain their torque set without the need for additional sealants or RTV.

Designed to resist blowouts and burn-through, these .030-inch thick gaskets distribute clamping loads evenly across the sealing area, which helps minimize bore distortion during installation. Whether you are running a high-compression naturally aspirated build or a forced induction setup, Cometic MLS gaskets provide the durability needed to prevent exhaust leaks at the manifold or header flange.

• Part Number: C5392-030
• Thickness: .030 inch
• Construction: Multi-Layer Steel (MLS) with stainless steel shim
• Sold as a pair
• Maintains torque set and resists corrosion
• No sealants required for installation

Fits 1988-1989 Nissan Pulsar NX SE (CA18DET).

Engineered for high-performance applications, the Cometic Multi-Layer Steel (MLS) exhaust gasket kit provides a superior seal for the Nissan CA18DET engine. These gaskets are designed to withstand extreme cylinder pressures and the thermal expansion variations between different cylinder head and exhaust manifold materials. The .030" thickness ensures a precise fit, while the specialized MLS construction maintains a consistent torque set over time.

Unlike standard composite gaskets, these MLS units are corrosion-resistant and will not burn through or push out under heavy load. Their design eliminates the need for messy sealants, providing a cleaner installation and more reliable long-term performance for your manifold assembly.

• Material: Multi-Layer Steel (MLS)
• Thickness: .030 inch
• Quantity: 4 pieces per kit
• Compatibility: Replaces OE gaskets on CA18DET DOHC engines
• Features: Corrosion resistant, maintains torque set, no sealant required
• Manufacturer Part Number: C4523

Ensure a reliable, leak-free seal between your turbocharger and manifold with the Cometic C4516 T4 Garrett Exhaust Inlet Flange Gasket. At .010 inches thick, this precision-engineered gasket is designed to withstand the extreme thermal loads and high pressures found in performance forced induction systems.

Built to handle the varying expansion rates of different manifold and housing materials, this gasket is constructed to resist burn-through and will not push out under boost. It maintains a consistent torque set over time, providing a superior seal compared to standard composite alternatives. Whether you are performing a fresh turbo install or servicing your exhaust manifold, this specialized gasket ensures maximum exhaust gas velocity is directed into the turbine housing.

• Flange Fitment: T4 Garrett Exhaust Inlet
• Thickness: .010 inch
• Durability: Corrosion resistant and high-temperature stable
• Performance: Designed to maintain torque set and prevent blowout
• Manufacturer Part Number: C4516

Fits select 1983-1989 Ford Mustang, Ranger, Thunderbird, Mercury Capri, Cougar, and Merkur XR4Ti.

The Cometic C4514 Turbo Turbine Inlet Gasket is engineered to provide a high-integrity seal for T3/T4 turbocharger flanges. Designed to withstand the extreme thermal cycles and pressures of forced induction systems, this gasket is manufactured from advanced materials that resist burning through or pushing out under high boost. It is specifically built to maintain a consistent torque set, ensuring your turbo-to-manifold connection remains leak-free even across different expansion rates of manifold materials.

• Specifically designed for T3/T4 turbine inlet exhaust flanges
• Advanced material construction resists corrosion and high-temperature degradation
• Maintains critical torque settings to prevent flange warping and exhaust leaks
• Withstands various cylinder head and manifold material combinations
• Manufacturer Part Number: C4514

Fits 1993-1998 Toyota Supra and Lexus GS300/SC300 models equipped with the 2JZ-GTE engine. This Cometic Multi-Layer Steel (MLS) exhaust manifold gasket is engineered to manage the extreme cylinder pressures and thermal stresses common in high-performance turbocharged applications.

Constructed from multiple layers of spring stainless steel, this 2-piece gasket set provides a superior seal that maintains a consistent torque set across the manifold flange. Unlike composite gaskets, the MLS design will not burn through or push out under high boost. The stainless steel layers are naturally corrosion-resistant and require no additional sealants for installation, ensuring a precise fit against both the cylinder head and the manifold surface.

• Manufacturer Part Number: C4209-030
• Material: Multi-Layer Steel (MLS)
• Thickness: .030 inch
• Port Dimensions: 1.600 inch x 1.220 inch
• Configuration: 2-Piece Set
• Fitment: Toyota 2JZ-GTE (1993-1998)

Fits Nissan RB20 and RB25 engines.

The Cometic C4177-030 MLS (Multi-Layer Steel) Exhaust Manifold Gasket is engineered to handle the extreme cylinder pressures and thermal cycling common in high-performance Nissan RB-series builds. Constructed from multiple layers of embossed stainless steel, this gasket maintains a consistent torque set and provides a superior seal compared to traditional composite materials. The embossed outer layers act as a spring, conforming to the sealing surfaces of both the cylinder head and the exhaust manifold to effectively eliminate the risk of burn-through or gasket push-out.

This gasket features a technical .030-inch thickness and is designed for ports measuring 1.575 inches by 1.340 inches. Because the MLS design provides an active seal through mechanical tension, no additional liquid sealants or RTV are required for installation. This design requires less clamp load than standard gaskets, reducing potential bore distortion while ensuring a durable, leak-free exhaust path.

• Manufacturer Part Number: C4177-030
• Material: Multi-Layer Steel (MLS) with stainless shim layer
• Thickness: .030 inch
• Port Dimensions: 1.575 in x 1.340 in
• Installation: Dry-seal design (no sealants required)
• Durability: Corrosion resistant and burn-through resistant

Fits select 1993-2001 Honda Accord and Prelude models (H22S) including Value Package, Base, S, Type SH, and VTEC trims.

Cometic Multi-Layer Steel (MLS) exhaust gaskets are engineered to handle extreme cylinder pressures and high exhaust temperatures. Constructed from multiple layers of stainless steel, these gaskets maintain a precise torque set and resist corrosion, preventing burn-through or gasket push-out even in demanding performance applications. The embossed outer layers provide a reliable seal across various surface finishes and materials, while the stainless shim layer allows for consistent thickness and structural integrity.

• Advanced Multi-Layer Steel (MLS) construction for durability
• Designed to withstand high cylinder pressures and temperatures
• Requires less clamp load, reducing potential bore distortion
• Ensures even load distribution across the entire sealing surface
• Dry installation; requires no additional sealants or RTV
• Thickness: .030 inch
• Port Dimensions: 1.770 inch x 1.380 inch
• Manufacturer Part Number: C4155-030

Fits select 1990-2001 Acura Integra and Honda Civic, Civic del Sol, and CR-V models (All B-Series Engines).

The Cometic MLS (Multi-Layer Steel) exhaust manifold gasket is engineered to handle the extreme cylinder pressures and heat found in high-performance Honda B-Series builds. Constructed with embossed outer layers of stainless steel and a central shim layer, this gasket maintains a consistent torque set and provides superior sealing on a variety of surface finishes. The three-layer stainless steel design is highly resistant to corrosion and will not burn through or push out under heavy load.

Unlike traditional composite gaskets, this Cometic MLS unit requires no sealants for installation. Its design promotes uniform load distribution across the sealing area, which helps reduce bore distortion by requiring less clamp load to achieve a perfect seal.

• Individual Port Size: 1.850 inch x 1.340 inch
• Thickness: .030 inch
• Material: Multi-Layer Steel (MLS)
• Requires no sealants or re-torquing
• Replaces OE gaskets for extreme durability
• Manufacturer Part Number: C4151-030

Fits select 2015-2021 Ford Mustang Shelby GT350, GT350R, GT500 and Dodge Challenger/Charger SRT Hellcat (5.2L).

Cometic Multi-Layer Steel (MLS) Exhaust Gaskets are engineered for high-performance applications where extreme cylinder pressures and high temperatures are the norm. These gaskets utilize embossed outer layers to ensure a reliable seal across varying surface finishes, while the uncoated stainless steel center shim provides structural integrity. Designed to maintain a consistent torque set, these gaskets resist corrosion and eliminate the risk of burnout or push-out common with inferior materials.

• Construction: Multi-Layer Steel (MLS) with stainless steel shim
• Thickness: .030in
• No sealants required for installation
• Optimized load distribution minimizes bore distortion
• Resistant to high-heat burnout and chemical corrosion
• Manufacturer Part Number: C15601-030

Ensure a reliable, high-temperature seal for your turbocharger setup with the Cometic C15586 .016in Stainless Steel T3 Divided Turbo Inlet Flange Gasket. Designed specifically for divided T3 housings, this gasket is engineered to withstand the extreme heat and pressure cycles inherent in high-performance exhaust systems.

Constructed from premium stainless steel, this gasket provides superior durability compared to standard composite or soft metal options, preventing blowouts and maintaining port integrity. The .016-inch thickness offers a precise fit for mating surfaces while accommodating the thermal expansion found in forced induction applications.

• MPN: C15586
• Material: High-grade Stainless Steel
• Thickness: .016 inch
• Flange Type: T3 Divided Turbo Inlet
• Application: Designed for high-heat turbocharger exhaust interfaces