Designed for the high-temperature environment of turbocharged EJ-series engines, the Turbo XS GWS-UP-L is a heavy-duty lower uppipe gasket that provides a critical seal between the exhaust manifold and the uppipe. This gasket is engineered to prevent pre-turbo exhaust leaks that can degrade spool times and lead to boost inconsistencies.

Constructed from 7 layers of premium stainless steel, this multi-layer steel (MLS) gasket offers significantly better durability and sealing capability than standard composite or thin metal gaskets. Its reinforced construction is built to withstand extreme thermal expansion and high exhaust pressures without blowing out, making it an essential replacement during any uppipe or manifold service on your Subaru.

• Fits Subaru EJ20 and EJ25 turbocharged engines
• 7-layer stainless steel construction for superior thermal resistance
• Specific for the lower uppipe-to-manifold connection
• Provides a reliable, high-pressure seal to maintain exhaust velocity
• Manufacturer Part Number: GWS-UP-L

Fits Hyundai Genesis Coupe BK2 (2.0T).

Ensure a reliable, leak-free connection between your turbocharger and downpipe with the Turbo XS Turbine Outlet Gasket. Specifically engineered for the Hyundai Genesis Coupe BK2 2.0T, this gasket is built to withstand the extreme thermal stresses and pressures of a turbocharged exhaust system.

• 7-layer stainless steel construction for superior durability and heat resistance
• Multi-layer design accommodates thermal expansion to maintain a consistent seal
• Prevents exhaust leaks that can lead to power loss and inaccurate sensor readings
• Direct replacement for the factory turbine outlet gasket
• Manufacturer Part Number: GTO-GCBK2

Fits 2010-2012 Hyundai Genesis Coupe (2.0T).

The Turbo XS Multi-Layer Steel (MLS) Turbine Outlet Gasket is engineered to provide a high-pressure seal between the turbocharger and the exhaust manifold. Built with a 3-layer design, this gasket features a durable stainless steel fire ring that promotes a positive seal against the flange surfaces. This construction prevents exhaust gas leaks, ensuring maximum turbocharger efficiency and maintaining manifold pressure for the 2.0T engine.

• Direct replacement for OEM Part Number: 28535-2C420
• Multi-Layer Steel (MLS) construction for superior thermal resistance
• Integrated stainless steel fire ring for enhanced sealing
• Total thickness: 0.92 mm
• Quantity: 3-Layer stack
• Manufacturer Part Number: GTO-GCBK1

Ensure a reliable, leak-free seal between your turbocharger and downpipe with the Turbo XS 7-layer stainless steel turbine outlet gasket. Designed specifically for Subaru vehicles equipped with the FA24 turbocharged engine, this gasket is built to withstand the extreme thermal cycling and high-pressure environments found in forced induction systems.

Unlike standard composite gaskets that can degrade or blow out over time, this multi-layer steel (MLS) design provides superior resilience. The 7-layer construction allows for optimal crush and recovery, ensuring a tight seal even if there are minor flange irregularities.

• Construction: 7-layer high-grade stainless steel for maximum durability
• Application: Turbine outlet (downpipe/J-pipe) flange
• Compatibility: Fits Subaru FA24 turbocharged engines
• MPN: GTO-FA24

Fits select 2002-2021 Subaru WRX, WRX STI, Forester XT, Legacy GT, and Outback XT models equipped with EJ20 or EJ25 single scroll turbochargers.

This Turbo XS turbine outlet gasket provides a reliable seal between the turbocharger housing and the downpipe. Designed to replace a worn or leaking factory seal, this gasket is engineered with a 5-layer Multi-Layer Steel (MLS) construction to withstand the extreme heat and pressure of the exhaust stream. It features a durable stainless steel fire ring that concentrates sealing pressure against the flange surfaces, ensuring exhaust gases remain contained within the system for optimal turbocharger efficiency and performance.

• Manufacturer Part Number: GTO-EJ2025
• Replaces OEM Part Number: 44022AA180
• Construction: 5-Layer Multi-Layer Steel (MLS)
• Thickness: 1.5mm
• Material: Stainless Steel with integrated fire ring
• Compatibility: Single Scroll turbocharger configurations only

Fits 2015-2021 Subaru WRX models (FA20 engine).

The Turbo XS GTI-FA20 Turbine Inlet Gasket provides a high-integrity seal between the exhaust manifold and the turbocharger, ensuring exhaust energy is directed where it belongs: into the turbine. Constructed with a Multi-Layer Steel (MLS) design, this gasket features an integrated stainless steel fire ring. This specialized fire ring is engineered to resist high thermal loads and promote a durable seal against the flange surfaces, preventing leaks that can lead to power loss and slower spool times.

Whether you are performing routine maintenance or installing an upgraded turbo, this gasket offers a professional-grade solution that replaces the worn factory unit with superior durability. It is designed to match OE dimensions for a direct-fit installation on the FA20 platform.

• Multi-Layer Steel (MLS) construction for superior thermal resistance
• Durable stainless steel fire ring design to ensure a tight flange seal
• Thickness specifications: 0.95mm / 0.75mm layers
• Direct replacement for OEM Part Number: 44616AA210
• Manufacturer Part Number: GTI-FA20

Fits select 2002-2021 Subaru Forester XT, Impreza WRX, Legacy GT, Outback XT, and WRX STI (EJ20 / EJ25 engines).

The Turbo XS Turbine Inlet Gasket provides a high-integrity seal between the up-pipe and the turbocharger inlet on single-scroll EJ-series engines. Engineered with a Multi-Layer Steel (MLS) construction, this gasket is built to withstand the high thermal loads and pressure cycles inherent to turbocharged exhaust systems. It features an integrated stainless steel fire ring designed to crush and seal against the flange surface, effectively containing exhaust gases to maintain optimal turbine spool and prevent performance-robbing leaks.

• Construction: 5-layer Multi-Layer Steel (MLS)
• Material: Stainless steel with integrated fire ring
• Application: Single Scroll Turbochargers
• Replaces OEM Part Number: 44022AA150
• Manufacturer Part Number: GTI-EJ2025

Vehicle Fitment:

• 2004-2005, 2009 Subaru Forester XT
• 2002-2014 Subaru Impreza WRX
• 2005-2006 Subaru Legacy GT
• 2005-2006 Subaru Outback XT
• 2015-2021 Subaru WRX STI (Base, Limited, Launch Edition, S209, Series.HyperBlue, Type RA)

Seal your exhaust system properly with the Turbo XS Multi-Layer Steel (MLS) gasket, designed specifically for Subaru EJ20 and EJ25 engines. This gasket provides a robust connection between the exhaust manifold and a 3-bolt aftermarket up-pipe, preventing the leaks that often plague thinner, single-layer alternatives.

Constructed with five layers of high-grade stainless steel, this gasket (MPN: GEM3HUP-EJ2025) is engineered to survive the extreme thermal cycles of a turbocharged engine. It features a durable stainless steel fire ring design that concentrates sealing pressure against the flange surface, ensuring exhaust gases stay within the manifold to maintain turbo response and boost pressure.

• Fits Subaru EJ20 and EJ25 engines with 3-bolt aftermarket headers/up-pipes
• Multi-Layer Steel (MLS) construction for maximum durability
• 5-layer stack for superior compression and recovery
• Stainless steel fire ring for a high-pressure seal
• Thickness: 1.5mm
• Manufacturer Part Number: GEM3HUP-EJ2025

The Turbo XS G762H-MLSS2X is a heavy-duty, multilayered solution designed for high-performance exhaust sealing, specifically for Subaru models mating an OEM downpipe to a 3-inch catback exhaust system. This gasket addresses common leak points in transition joints by utilizing a super-thick 11-layer construction that provides superior compression and recovery.

• Material: 11-Layer 304 Stainless Steel for maximum corrosion resistance
• Internal Diameter: 76mm (3.0 inches)
• Thickness: 2.75mm for a robust, high-pressure seal
• Bolt Hole Distance: 105mm (center-to-center)
• Design: 2-Hole flange configuration
• MPN: G762H-MLSS2X

Engineered to withstand extreme thermal cycles, this multilayer stainless steel (MLSS) gasket replaces standard thin gaskets to ensure a reliable, leak-free connection between factory and aftermarket exhaust components.

Ensure a reliable, leak-free seal between your Subaru OEM downpipe and a 3-inch catback exhaust system. The Turbo XS G762H-MLSS gasket is specifically designed for the high-heat, high-vibration environment of turbocharged exhaust systems, providing a much more durable alternative to standard composite or single-layer gaskets.

Constructed from seven individual layers of 304 stainless steel (MLSS), this 1.75mm thick gasket offers superior compressibility to seal against warped or imperfect flange surfaces. The 304SS material provides excellent corrosion resistance, ensuring the gasket won't degrade over time or seize to the exhaust flanges.

• Inner Diameter: 76mm (3.0 inches)
• Bolt Pattern: 2-Hole with 105mm bolt-to-bolt center distance
• Construction: 7-Layer Multilayered Stainless Steel (MLSS)
• Material: 304 Stainless Steel
• Thickness: 1.75mm
• Manufacturer Part Number: G762H-MLSS

This gasket is an essential component when mating factory Subaru downpipes to aftermarket 3" exhaust systems to prevent exhaust leaks and maintain proper backpressure and sensor readings.

Ensure a leak-free seal in your high-performance exhaust system with the Turbo XS 2-bolt high-temperature exhaust gasket. Designed for 76mm (3-inch) inner diameter applications, this heavy-duty gasket is engineered to withstand the extreme heat and pressure typical of turbocharged or high-output naturally aspirated engines.

Whether you are installing a new downpipe, cat-back, or mid-pipe, using a fresh high-temp gasket is critical to preventing exhaust leaks that can lead to power loss, inaccurate O2 sensor readings, and unwanted cabin drone. This gasket features a 2-bolt flange design to ensure precise alignment and maximum clamping force across the mating surfaces.

• Inner Diameter: 76mm (3.0 inches)
• Flange Type: 2-Bolt
• Rating: High-temperature resistant
• Quantity: Single Gasket
• Manufacturer Part Number: G762H

Ensure a reliable, high-temperature seal in your exhaust or turbo system with the Ticon Industries 3.5" 2-bolt Multi-Layer Steel (MLS) gasket. Engineered to withstand extreme thermal cycles and high pressures, this MLS gasket provides superior durability and sealing performance compared to traditional composite or graphite gaskets.

Constructed from multiple layers of spring steel, this gasket is designed to compress and conform to flange surfaces, effectively sealing minor irregularities. It is a critical component for custom exhaust fabrication, mid-pipes, or turbocharger downpipes utilizing 3.5-inch 2-bolt flanges.

• Bore Diameter: 3.5 inches (89mm)
• Construction: Multi-Layer Steel (MLS)
• Flange Type: 2-Bolt
• Quantity: Single gasket
• Manufacturer Part Number: 120-08910-0001

Ticon Industries 3.0-inch 2-bolt Multi-Layer Steel (MLS) gaskets are engineered to provide a superior, leak-free seal for high-performance exhaust systems. Unlike standard composite gaskets that can blow out under high pressure or heat, these MLS gaskets utilize multiple layers of stainless steel to maintain a reliable seal even in turbocharged or high-heat environments.

These gaskets are designed to fit standard 3.0-inch 2-bolt exhaust flanges, making them an ideal choice for custom exhaust fabrication, downpipes, and cat-back systems. The multi-layer design allows for better recovery and sealing across uneven flange surfaces.

• Product Type: Multi-Layer Steel (MLS) Gasket
• Configuration: 2-Bolt Flange
• Inner Diameter: 3.0 inches (76mm)
• Quantity: Pack of 5
• Manufacturer Part Number: 120-07610-0005

Ensure a reliable, leak-free seal in your high-performance exhaust system with the Ticon Industries 2.5-inch 2-Bolt MLS Gasket. These gaskets utilize Multi-Layer Steel (MLS) construction, designed to withstand the extreme temperatures and pressures found in high-flow and turbocharged applications where standard composite gaskets often fail.

Designed for universal fitment on 2.5-inch exhaust flanges with a standard 2-bolt pattern, these gaskets offer superior recovery and structural integrity compared to single-layer alternatives. This 5-pack is ideal for fabricators and enthusiasts building custom downpipes, mid-pipes, or cat-back systems who require a durable sealing solution that resists blowouts.

• Inner Diameter: 2.5 inches (63.5mm)
• Flange Type: 2-Bolt configuration
• Construction: Multi-Layer Steel (MLS) for maximum durability
• Quantity: 5 individual gaskets
• Manufacturer Part Number: 120-06310-0005

The Ticon Industries 2.5in 2-Bolt Multi-Layer Steel (MLS) Gasket provides a high-performance sealing solution for exhaust flange connections. Engineered to withstand the extreme temperatures and pressure fluctuations of high-output and turbocharged engines, these MLS gaskets replace prone-to-fail composite gaskets with a durable, spring-steel construction.

These gaskets feature multiple layers of steel that maintain a consistent seal even as exhaust components expand and contract during heat cycles. They are designed for standard 2.5-inch 2-bolt flanges, making them an essential component for custom exhaust fabrication or routine maintenance on performance downpipes, mid-pipes, and cat-back systems.

• Manufacturer Part Number: 120-06310-0002
• Size: 2.5 inch Internal Diameter
• Configuration: 2-Bolt Flange
• Material: Multi-Layer Steel (MLS) for superior thermal durability
• Quantity: Set of 2 gaskets

Fits 2012-2018 Jeep Wrangler and Wrangler JK models equipped with the 3.6L engine.

The Rugged Ridge Exhaust Spacer Kit solves a critical clearance issue found on 2012-2018 Jeep Wranglers with 2.5 inches or more of suspension lift. In these configurations, the front driveshaft often makes contact with the exhaust Y-pipe during suspension cycling, which can melt the CV boot and lead to premature driveshaft failure. By installing these spacers between the front headers and the Y-pipe, you effectively relocate the exhaust rearward to clear the path of the drivetrain.

This simple bolt-on solution increases available front suspension travel from the factory-limited 2.5 inches to over 5.5 inches without requiring permanent modifications to your exhaust system. The kit includes all necessary hardware for a straightforward installation that preserves the integrity of your factory components.

• Prevents driveshaft contact with the Y-pipe on lifted vehicles
• Accommodates suspension travel for lifts over 5.5 inches
• No permanent modifications, cutting, or welding required
• Direct bolt-on installation at the exhaust flanges
• Manufacturer Part Number: 17606.76
• Backed by a Limited 5-Year Warranty

Includes: Exhaust spacers and installation hardware.

Ensure a reliable, leak-free seal for your exhaust system with the QTP QTEC 3-Inch 3-Bolt Gasket. This high-temperature replacement gasket is designed specifically for Quick Time Performance QTEC electric cutouts, providing the critical interface between the cutout motor assembly and the exhaust flange or adapter pipe.

• Compatible with 3-inch QTP QTEC electric cutout valves
• Standard 3-bolt flange pattern for precise alignment and fitment
• High-temperature material construction designed for the rigors of exhaust heat
• Essential for preventing exhaust leaks that can affect sound quality and performance
• Manufacturer Part Number: 10300G

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Charger, Durango, Magnum, Ram 1500, and Jeep Grand Cherokee/Wrangler (6.1L / 6.4L).

Ensure a leak-free seal between your cylinder heads and exhaust system with these Kooks Cometic Multi-Layer Stainless Steel (MLS) exhaust gaskets. Engineered specifically for the high-performance demands of 6.1L and 6.4L Hemi engines, these gaskets utilize multiple layers of stainless steel to provide superior resilience against extreme temperatures and high exhaust pressures. They are the ideal choice when installing Kooks headers or performing maintenance on high-output street and track vehicles.

• Manufacturer Part Number: SS-755872
• Material: Multi-Layer Stainless Steel (MLS)
• Engine Compatibility: 6.1L and 6.4L Hemi
• Design: Specifically engineered for maximum power and durability
• Origin: 100% Manufactured in the USA
• Warranty: Limited Lifetime Warranty to the original purchaser

Ensure a high-performance seal for your engine build with Kooks Cometic MLS Exhaust Gaskets, specifically engineered for GM LSX cylinder heads. These gaskets utilize Multi-Layer Steel (MLS) technology to provide superior durability and sealing integrity under the extreme heat and pressure typical of high-output street, race, and off-road applications.

Fits select 1967-2017 GM models from Buick, Cadillac, Chevrolet, GMC, Oldsmobile, and Pontiac equipped with LSX cylinder heads.

• Cometic Multi-Layer Steel (MLS) construction for maximum sealing reliability
• Specifically designed for GM LSX cylinder head exhaust ports
• Dyno and race-tested to handle high-performance exhaust flow
• Handcrafted in the USA by Kooks Headers and Exhaust
• Manufacturer Part Number: SS-755818
• Includes a Limited Lifetime Warranty to the original purchaser

Fits select 2011-2024 Ford F-150 and Mustang (5.0L).

Ensure a leak-free seal for your high-performance Coyote engine with these Kooks Cometic Multi-Layer Steel (MLS) exhaust gaskets. Engineered specifically for the Ford 5.0L 4V engine, these gaskets are designed to withstand the extreme temperatures and pressures of high-performance street and racing applications. Unlike standard single-layer gaskets, the Cometic MLS construction utilizes multiple layers of stainless steel to provide superior recovery and seal integrity, effectively managing thermal expansion and hardware movement between the head and header flange.

• Multi-Layer Steel (MLS) construction for maximum durability and sealing
• Designed specifically for the Ford 5.0L 4V Coyote engine
• Replaces prone-to-leak factory or single-layer gaskets
• Ideal for use with Kooks headers or high-performance exhaust systems
• Manufactured in the USA
• Manufacturer Part Number: SS-755392

Fits select 1969-2014 Ford Mustang models including Shelby GT500, Mach 1, and SVT Cobra R (5.4L / 5.8L).

Kooks M.L.A. (Multi-Layer Aluminum) exhaust gaskets are engineered to provide a high-integrity, leak-free seal between the cylinder head and the header flange. Designed to withstand the extreme heat and pressure of high-performance Ford 4V modular and vintage engines, these gaskets replace worn or inferior OE seals to ensure maximum exhaust velocity and performance. Every gasket is handcrafted in the USA and extensively dyno-tested to meet the standards of professional racing and street performance.

• Multi-Layer Aluminum (M.L.A.) construction for superior heat resistance and sealing
• Engineered specifically for Ford 5.4L and 5.8L 4-valve engine configurations
• Handcrafted in the USA using premium materials
• Dyno and race-proven for reliable performance under heavy load
• Limited lifetime warranty for the original purchaser
• Manufacturer Part Number: PY-8034-AL

Fits 2005-2010 Ford Mustang GT, Bullitt, and Shelby GT (4.6L).

Kooks M.L.A. (Multi-Layer Aluminum) exhaust gaskets provide a reliable, high-temperature seal between your 4.6L 3-valve cylinder heads and headers. Engineered for the rigors of high-performance street and racing applications, these gaskets are designed to prevent exhaust leaks that can lead to power loss and inaccurate O2 sensor readings. Proudly handcrafted in the USA, they offer the durability and precision fitment expected from an industry leader in high-performance exhaust technology.

• M.L.A. multi-layer construction for optimal compression and recovery.
• Specifically engineered for Ford 4.6L 3V Modular engines.
• Compatible with Kooks headers and standard exhaust mounting points.
• Handcrafted in the USA by Kooks Headers and Exhaust.
• Manufacturer Part Number: PY-8023-A-AL

Ensure a high-integrity, leak-free seal for your Small Block Ford exhaust system with Kooks Multi-Layer Aluminum (MLA) header gaskets. Engineered to withstand the extreme temperatures and pressures of high-performance street and racing applications, these gaskets provide superior crush resistance and thermal stability compared to standard composite materials.

These gaskets feature a precise 3-inch inline bolt pattern specific to SBF cylinder heads. The multi-layer aluminum construction allows the gasket to conform to minor surface irregularities on the header flange and cylinder head face, maintaining a positive seal even under high-vibration conditions. Built for durability, they are handcrafted in the USA to the exacting standards Kooks has maintained since 1962.

• Material: Multi-Layer Aluminum (MLA)
• Bolt Pattern: 3.00-inch Inline
• Engine Fitment: Small Block Ford (SBF)
• Manufacturing: Handcrafted in the USA
• Part Number: PY-8013-AL

Ensure a reliable, leak-free seal for your high-performance exhaust with this pair of JBA Gen III Hemi D-Port header gaskets. These premium flange gaskets are manufactured from an extra-thick, specially formulated material designed to compensate for flange surface irregularities and provide a superior seal compared to standard OE-style replacements.

Specifically engineered for an exact port match with JBA headers, these gaskets eliminate the turbulence and potential failure points common with universal gaskets. Built to withstand extreme thermal and mechanical stress, they are rated for temperatures up to 1100°F and can handle exhaust pressures reaching 3700 psig, making them ideal for modified 5.7L and 6.4L Hemi applications.

• Fits Chrysler Gen III Hemi engines (5.7L and 6.4L)
• D-Port flange configuration for precise exhaust port alignment
• Extra-thick, high-density material for superior sealing capabilities
• Thermal resistance rated up to 1100°F
• Withstands exhaust pressures up to 3700 psig
• Designed for exact compatibility with JBA header flanges
• Manufacturer Part Number: 063-1965
• Includes one pair of gaskets

Ensure a reliable, leak-free seal between your cylinder head and exhaust manifold with the ISR Performance Multi-Layer Exhaust Manifold Gasket. Designed specifically for the Nissan SR20DET engine, this gasket is engineered to withstand the extreme heat cycles and elevated pressures common in high-performance turbocharged applications.

• Fits Nissan SR20DET engines
• Multi-layer construction for superior durability and sealing compared to standard composite gaskets
• Designed to compensate for minor flange irregularities under high thermal stress
• Direct replacement for the factory gasket
• Manufacturer Part Number: IS-EMG-SR207

Fits Nissan 240SX and other models equipped with the KA24DE 2.4L DOHC engine.

The ISR Performance 7-layer exhaust manifold gasket is an essential upgrade or replacement for high-heat environments where standard gaskets often fail. This multi-layer steel (MLS) gasket provides a robust, resilient seal between the cylinder head and the exhaust manifold. Its stacked design is engineered to compensate for slight surface irregularities and withstand the thermal expansion cycles common in high-performance or turbocharged KA24DE applications, preventing leaks that cause power loss and erratic sensor readings.

• Advanced 7-layer multi-layer steel (MLS) construction for maximum sealing pressure
• Engineered to withstand extreme exhaust temperatures without blowing out
• Precision-stamped to match factory cylinder head porting
• Direct replacement for the OEM exhaust manifold gasket
• Manufacturer Part Number: IS-EMG-KA247

The ISR Performance 3in 2-Bolt Exhaust Gasket (IS-2BLT) provides a durable, high-temperature seal between 3-inch exhaust flanges. Designed to replace worn, leaking, or blown-out gaskets, this component is essential for maintaining proper backpressure and preventing exhaust leaks that can trigger check engine lights or skew oxygen sensor readings.

• Specifically designed for 3-inch (76mm) internal diameter exhaust systems
• Standard 2-bolt flange configuration for broad compatibility with aftermarket and custom exhausts
• Constructed from high-temperature resistant materials to withstand extreme thermal cycling
• Ensures a leak-free connection between downpipes, cat-back sections, or mufflers
• Manufacturer Part Number: IS-2BLT

Ensure a leak-free seal in your custom or replacement exhaust system with this genuine HKS Muffler Gasket. Designed to withstand the extreme thermal cycles and high pressures found in performance exhaust systems, this gasket provides a reliable interface between exhaust flanges to prevent leaks that can cause power loss and excessive cabin drone.

• Inner Diameter: 66mm
• Outer Diameter: 74mm
• Construction: High-temperature composite material
• Manufacturer Part Number: 34001-AK024
• Engineered for precision fitment and long-term durability

Ensure a leak-free exhaust system with this genuine HKS Muffler Gasket. Designed to withstand extreme thermal loads and high-pressure exhaust flow, this gasket provides a critical seal between exhaust flanges to prevent gas leaks that can negatively impact engine performance and sound quality.

As a high-wear component, replacing gaskets during any muffler installation or exhaust system maintenance is essential for maintaining proper backpressure and preventing carbon soot buildup at the connection points. This gasket is manufactured to HKS's exacting tolerances for long-term durability and a precision fit.

• Inner Diameter (ID): 51.1mm
• Outer Diameter (OD): 59.9mm
• Construction: High-temperature resistant composite material
• Manufacturer Part Number: 34001-AK021
• Fitment: Universal application for compatible exhaust flange sizes

Ensure a leak-free seal in your high-performance exhaust system with the HKS Universal EX 85mm Exhaust Gasket set. These gaskets are engineered to withstand the extreme temperatures and pressures typical of performance driving and racing applications.

Constructed for durability and heat resistance, the HKS EX series gaskets provide a reliable interface between exhaust flanges, preventing power-robbing leaks and maintaining optimal exhaust gas velocity. This 85mm bore size is ideal for custom exhaust fabrications or as high-quality replacements for existing 85mm systems.

• Manufacturer Part Number: 34001-AK005
• Gasket Type: Exhaust (EX)
• Internal Diameter: 85mm
• Quantity: Set of 2 gaskets
• Fitment: Universal application for 85mm flanges