Fits 2005-2015 Nissan Xterra (V6-4.0L) including Off-Road, PRO-4X, S, SE, and X models.

The aFe Power MACHForce XP cat-back exhaust system is engineered to improve flow and durability for the 2005-2015 Nissan Xterra. Constructed from mandrel-bent 409 stainless steel tubing, this system features a Hi-Tuck tip designed specifically to maximize ground clearance and departure angles for off-road use. The straight-through, free-flowing stainless steel muffler absorbs high-pitch tones to deliver a powerful, aggressive sound while reducing backpressure.

This system installs directly to factory mounting locations using high-quality OE-style bayonet hangers and band clamps. These hangers maintain stable pipe positioning even under high-vibration and high-heat conditions, ensuring the system stays secure during rugged driving. The included heavy-duty flange and band clamps provide a complete 360-degree sealing surface for a leak-free installation.

• Material: Mandrel-bent 409 stainless steel
• Tubing Size: 2.5-inch to 3-inch diameter
• Tip Style: Hi-Tuck side-exit for high-clearance off-roading
• Muffler: Straight-through, free-flowing stainless steel design
• Installation: Bolts to factory mounting points with included hardware
• Part Number: 49-46111

Fits 2005-2019 Nissan Frontier (V6-4.0L).

The aFe Power MACHForce XP cat-back exhaust system is engineered to unleash performance, providing documented gains of up to 11 horsepower and 10 lbs./ft. of torque. Constructed from 2.75-inch mandrel-bent 409 stainless steel tubing, this system optimizes exhaust flow and durability. A built-in crossover balance tube equalizes exhaust pulses and pressure, refining the exhaust note and reducing cabin drone for a more comfortable driving experience.

This system features a high-flow stainless steel muffler designed to absorb high-pitch tones while maintaining a powerful, mellow sound. For a premium finish, it is equipped with dual 4-inch round polished 304 stainless steel tips. The assembly is 100% hand TIG-welded and utilizes factory mounting locations with high-quality band clamps, ensuring a secure 360-degree seal and a hassle-free, bolt-on installation without the need for modifications.

• Performance Gains: +11 HP / +10 lbs.-ft. torque
• Tubing: 2.75-inch mandrel-bent 409 stainless steel
• Tips: Dual 4-inch round polished 304 stainless steel
• Muffler: High-flow stainless steel
• Installation: Bolt-on using factory mounting points
• Construction: Hand TIG-welded for maximum strength
• Hardware: Includes high-quality band clamps and necessary hardware
• Warranty: 2-year limited warranty
• Part Number: 49-46101-1

Fits 2025-2026 Toyota 4Runner (SR5, Limited, Platinum, Trailhunter, and TRD models).

The aFe GT Series Hi-Tuck cat-back exhaust system is engineered for the 2025-2026 Toyota 4Runner owner who demands a balance of performance and off-road utility. The signature Hi-Tuck tip is specifically developed to provide maximum ground clearance during steep climbs and technical descents, protecting your exhaust system from damage on rough terrain.

Built for durability and flow, the system is constructed from 2-1/2 inch mandrel-bent 409 stainless steel tubing and is 100% MIG-welded for race-proven strength. It features an acoustically tuned expansion chamber and a high-flow 409 stainless steel muffler to deliver a deep, powerful exhaust note. Designed as a direct bolt-on solution, it utilizes factory-style flanges and hangers for a hassle-free installation that requires no cutting or modifications.

• 2-1/2" mandrel-bent 409 stainless steel tubing for maximum durability
• Hi-Tuck tip design increases ground clearance and protects exhaust over obstacles
• High-flow 409 stainless steel muffler with acoustically tuned expansion chamber
• 100% MIG-welded construction for long-term structural integrity
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 49-46079

Fits 2024-2026 Toyota Land Cruiser (L4-2.4L).

The aFe Power Apollo GT Series cat-back exhaust is engineered for off-road durability and improved flow on the J250 Toyota Land Cruiser. Constructed from 2-1/2 inch mandrel-bent 409 stainless steel tubing, this system provides maximum strength while the Hi-Tuck design ensures extra ground clearance during extreme angle climbs and descents. The system features a high-flow 409 stainless steel muffler and an acoustically tuned expansion chamber to deliver a deep, resonant tone without sacrificing performance.

This direct bolt-on system utilizes factory-style flanges and hangers, requiring no cutting or modifications for a secure, hassle-free installation. Every joint is 100% MIG-welded for race-proven durability in harsh environments. Computer-aided design technology ensures precise fitment to the factory mounting points.

• Material: 2.5-inch mandrel-bent 409 stainless steel tubing
• Hi-Tuck design for superior ground clearance on rough terrain
• Acoustically tuned expansion chamber for a deep, refined exhaust note
• High-flow 409 stainless steel muffler
• 100% MIG-welded for maximum structural integrity
• Direct bolt-on fitment using OE-style flanges and hangers
• Manufacturer Part Number: 49-46075

Fits 2024-2026 Toyota Tacoma models equipped with the L4-2.4L turbo engine.

The aFe POWER ROCK BASHER cat-back exhaust system is engineered to provide your Tacoma with a rugged, throaty exhaust note while improving flow and durability. Constructed from 2-1/2 inch mandrel-bent 409 stainless steel tubing, this system ensures maximum exhaust velocity and resistance to corrosion in harsh environments. The high-flow 409 stainless steel muffler is specifically tuned to unleash performance and sound without compromising the structural integrity required for off-road use.

Designed for a precision fit, this system is 100% MIG-welded for race-proven strength. Installation is straightforward and requires no cutting or vehicle modifications; the system utilizes factory-style flanges and hangers to bolt directly to the OE mounting points for a secure, hassle-free fit.

• 2.5-inch mandrel-bent 409 stainless steel tubing for enhanced durability
• High-flow 409 stainless steel muffler produces a deep, throaty sound
• 100% MIG-welded for maximum structural integrity
• Direct bolt-on installation using factory-style flanges and hangers
• Computer-aided design ensures precise fitment on 2024-2026 Tacoma models
• Manufacturer Part Number: 49-46073

Fits 2016-2023 Toyota Tacoma Limited, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport models.

The aFe POWER Apollo GT Series cat-back exhaust system is engineered for improved flow and long-term durability. This system is constructed from 2-1/2 inch into 3 inch mandrel-bent 409 stainless steel tubing to maintain exhaust velocity while providing superior corrosion resistance compared to aluminized steel. A high-flow 409 stainless steel muffler is included to produce a mild, street-friendly exhaust note that enhances the vehicle's presence without excessive cabin drone.

Designed as a direct bolt-on upgrade, this system utilizes factory-style flanges and hangers to ensure a secure fit using original mounting points, requiring no cutting or permanent modifications. Each joint is 100% MIG-welded for maximum structural integrity. The system is finished with a 4-1/2 inch diameter clamp-on tip crafted from 304 stainless steel, featuring a high-temperature black finish and a riveted aFe POWER logo plate.

• 2-1/2 in. to 3 in. mandrel-bent 409 stainless steel tubing
• High-flow 409 stainless steel muffler delivers a mild sound profile
• 4-1/2 in. diameter black 304 stainless steel clamp-on tip
• 100% MIG-welded for race-proven strength
• Direct bolt-on installation with no cutting required
• Includes all necessary hardware for a hassle-free install
• Manufacturer Part Number: 49-46063-B

Fits 1999-2004 Toyota Tacoma Base, Limited, Pre Runner, S-Runner, and SR5 models (L4-2.4L / V6-3.4L).

Built for the trail, the aFe ROCK BASHER cat-back exhaust system is engineered to withstand rough terrain while improving exhaust flow. The system features a signature hi-tuck tip design, specifically developed to provide maximum ground clearance and protection during extreme approach and departure angles. This ensures your exhaust stays clear of obstacles during off-road climbs and descents.

The system is constructed from 2.5-inch mandrel-bent 409 stainless steel tubing, which provides superior strength and durability compared to standard aluminized steel. It includes a high-flow 409 stainless steel muffler that produces a deep, powerful sound. For a hassle-free installation, this system utilizes factory-style flanges and hangers, making it a direct bolt-on replacement that requires no cutting or custom modifications.

• Series: ROCK BASHER
• Material: 409 Stainless Steel
• Tubing Diameter: 2.5 inches
• Construction: 100% MIG-welded for race-proven durability
• Installation: Direct bolt-on to factory mounting points
• Exhaust Tip: High-tuck design for maximum off-road clearance
• Hardware: All necessary installation hardware included
• Manufacturer Part Number: 49-46049

Fits select 2016-2023 Toyota Tacoma models including SR, SR5, Limited, TRD Sport, TRD Off-Road, and TRD Pro (L4-2.7L / V6-3.5L).

The aFe POWER ROCK BASHER cat-back exhaust system is engineered for the off-road enthusiast who needs maximum ground clearance without sacrificing performance. This system features a "Hi-Tuck" tip design specifically developed to provide extra clearance during extreme approach and departure angles on rough terrain. Constructed from 2-1/2-inch mandrel-bent 409 stainless steel tubing, it ensures smooth exhaust flow and long-term durability in harsh environments.

This direct bolt-on system utilizes factory-style flanges and hangers for a secure fit that requires no cutting or permanent vehicle modifications. Every joint is 100% MIG-welded for race-proven strength. The system is finished with a 2-1/2-inch polished 304 stainless steel clamp-on tip, laser-etched with the aFe POWER logo for a clean look that stays tucked out of harm's way.

• 2-1/2" mandrel-bent 409 stainless steel tubing for improved flow
• Hi-Tuck design protects the exhaust tip during off-road climbs and descents
• 2-1/2" diameter polished 304 stainless steel clamp-on exhaust tip
• 100% MIG-welded for maximum structural integrity
• Direct bolt-on installation using factory mounting points and hardware
• CAD-designed for high-tolerance factory fitment
• Manufacturer Part Number: 49-46046

Fits 2016-2023 Toyota Tacoma (L4-2.7L / V6-3.5L) including SR, SR5, Limited, Trail, and TRD models.

Unlock performance and a more aggressive exhaust note with the aFe POWER MACH Force-Xp cat-back exhaust system. This system is engineered for maximum flow and durability, utilizing 2-1/2 inch to 3 inch mandrel-bent 409 stainless steel tubing to minimize turbulence and increase throttle response. Each system is 100% hand MIG-welded by certified technicians for race-proven strength on or off the trail.

The MACH Force-Xp features a high-flow, 18-inch straight-through 409 stainless steel muffler that delivers a deep, aggressive tone without sacrificing performance. The system is finished with a 4-1/2 inch black, angle-cut stainless steel tip featuring a laser-cut aFe POWER badge. For a secure fit, it utilizes OE-style bayonet hangers and mounts directly to factory locations for a straightforward installation.

• Construction: 2-1/2" to 3" mandrel-bent 409 stainless steel tubing
• Muffler: 18" straight-through 409 stainless steel design
• Exhaust Tip: 4.5" black angle-cut stainless steel tip with aFe POWER logo
• Installation: Uses factory mounting points and OE-style bayonet hangers
• Manufacturing: 100% hand MIG-welded
• MPN: 49-46042-B

Fits select 2016-2023 Toyota Tacoma and 2017 GMC Canyon Denali (V6-3.5L). This aFe POWER MACH Force-Xp cat-back exhaust system is engineered for maximum flow and durability on or off the trail.

Constructed from 2.5-inch mandrel-bent stainless steel tubing, this system features 100% MIG-welded construction for long-lasting performance. The Hi-Tuck design provides superior ground clearance for technical off-roading, protecting your exhaust during steep departures. A high-flow, straight-through muffler reduces turbulence and improves exhaust velocity, yielding dyno-proven gains of up to +9 horsepower and +10 lbs. x ft. of torque. The system is finished with a 4.5-inch polished stainless steel tip featuring a riveted laser-cut aFe POWER badge.

• Fits 2016-2023 Toyota Tacoma and 2017 GMC Canyon Denali (V6-3.5L)
• 2.5-inch mandrel-bent stainless steel tubing for maximum flow
• Hi-Tuck design for improved off-road clearance and departure angles
• High-flow, straight-through stainless steel muffler
• Includes a 4.5-inch diameter polished tip with riveted badge
• Bayonet-style hangers for secure, stable fitment
• Direct bolt-on installation for most configurations
• Manufacturer Part Number: 49-46034

Fits 2005-2015 Toyota Tacoma Base, Pre Runner, TRD Pro, and X-Runner (V6-4.0L).

The aFe Power Rebel Series cat-back exhaust system is engineered to improve flow and provide an aggressive profile for the 2nd Gen Tacoma. Constructed from 3-inch mandrel-bent 409 stainless steel tubing, this system reduces backpressure to unlock significant performance gains. In documented dyno testing, this exhaust configuration resulted in increases of up to +9 horsepower and +16 lbs. x ft. of torque.

This system features a unique middle-side exit design, positioning the dual 3-1/2 inch black 304 stainless steel tips in front of the rear passenger-side tire for a custom look. The installation is a direct bolt-on process that utilizes factory mounting locations and OE-style bayonet hangers, ensuring the exhaust stays secure under high-vibration and high-heat conditions without the need for cutting or welding.

• Manufacturer Part Number: 49-46033-B
• Tubing Diameter: 3-inch mandrel-bent 409 stainless steel
• Tip Description: Dual 3-1/2" black 304 stainless steel clamp-on tips with laser-etched logos
• Exit Location: Side exit in front of the rear passenger tire
• Muffler: High-flow stainless steel muffler for aggressive tone
• Hardware included: High-quality 360-degree band clamps and all necessary hardware
• Installation: 100% bolt-on; no cutting required

Fits 2007-2014 Toyota FJ Cruiser models including Base, Trail Teams Special Edition, and TRD Special Edition.

The aFe Power Rebel Series Cat-Back Exhaust System is engineered to improve exhaust flow and provide a unique look for your FJ Cruiser. This 3-inch mandrel-bent stainless steel system replaces the restrictive factory exhaust, featuring a high-flow stainless steel muffler that delivers an aggressive tone without compromising durability. The standout feature is the dual center-exit design, which exits directly under the rear bumper for a custom, balanced appearance.

• Exit Style: Unique Dual Center Exit with high-temperature black powder-coated tips
• Tubing: 3-inch mandrel-bent stainless steel for maximum flow and corrosion resistance
• Muffler: High-flow stainless steel muffler optimizes sound and performance
• Installation: Direct bolt-on system using factory mounting points; no cutting or welding required
• Hardware: Includes all necessary high-quality clamps and hardware for a complete installation
• Manufacturer Part Number: 49-46030-B

Fits select 2016-2023 Toyota Tacoma models including SR, SR5, Limited, Trail, and TRD Series (V6-3.5L).

The aFe Power MACH Force-Xp cat-back exhaust system is engineered to optimize flow and performance for the V6-3.5L Toyota Tacoma. Constructed from 3-inch, 100% MIG-welded, mandrel-bent stainless steel tubing, this system provides a smooth path for exhaust gases, reducing turbulence and backpressure. The heart of the system is a free-flowing, straight-through stainless steel muffler that delivers an aggressive tone while improving throttle response and power output.

In dyno testing, this system produced gains of up to +9 horsepower and +15 lbs. x ft. of torque. For a secure, leak-free installation, the kit includes high-quality flanges and band clamps. It is designed as a direct bolt-on replacement that reuses all factory mounting locations, requiring no cutting or modifications to the vehicle chassis.

• 3-inch mandrel-bent stainless steel tubing for maximum flow
• Straight-through stainless steel muffler design
• 4.5-inch black stainless steel tip with riveted laser-cut aFe Power badge
• MIG-welded for superior strength and durability
• Direct bolt-on installation using OE mounting points
• Includes all necessary hardware and high-quality band clamps
• Manufacturer Part Number: 49-46026-B

Fits 2003-2009 Lexus GX470 Base models (V8-4.7L).

The aFe Power MachFORCE XP cat-back exhaust system is engineered to optimize exhaust flow and durability for your Lexus GX470. Constructed from mandrel-bent 4-inch 409 stainless steel tubing, this system reduces backpressure to help lower EGTs and improve overall performance. The heart of the system is a 24-inch long, free-flowing muffler designed to absorb high-pitched tones, delivering a deep, aggressive exhaust note without sacrificing interior comfort.

Installation is straightforward using factory mounting locations, requiring no custom fabrication. The system features OE-style bayonet hangers to keep the pipes secure under high-vibration and high-heat conditions, while high-quality OE-style band clamps provide a consistent 360-degree sealing surface. The system is finished with a polished 304 stainless steel oval tip for a premium appearance.

• Manufacturer Part Number: 49-46016-P
• Tubing: 4-inch mandrel-bent 409 stainless steel
• Muffler: 24-inch long free-flowing design
• Tip: Polished 304 stainless steel oval tip
• Hangers: OE-style bayonet hangers for stability
• Clamps: OE-style 360-degree band clamps
• Installation: Uses factory mounting points
• Warranty: 2-Year Limited Warranty

Fits 2007-2014 Toyota FJ Cruiser Base, Trail Teams Special Edition, and TRD Special Edition.

The aFe MACH Force-Xp Hi-Tuck Cat-Back exhaust system is engineered to provide maximum ground clearance for off-road environments while improving exhaust flow. This system is constructed from 2.5-inch mandrel-bent 409 stainless steel tubing to maintain consistent diameters through every curve, reducing restriction compared to stock equipment. The Hi-Tuck design terminates before the rear bumper, protecting your exhaust tip from damage during steep climbs or descents on the trail.

Designed for a straightforward installation, this system utilizes OE-style bayonet hangers and includes heavy-duty band clamps for a secure, leak-free seal. The kit is versatile, fitting both slip-fit and flange-fit catalytic converter configurations. A high-flow muffler is included to deliver an aggressive exhaust note and improved throttle response.

• 2.5-inch mandrel-bent 409 stainless steel tubing
• Hi-Tuck design for maximum off-road clearance
• Free-flowing performance muffler for aggressive sound
• OE-style bayonet hangers for a secure fit
• Compatible with both slip-fit and flange-fit converters
• Includes all necessary installation hardware and band clamps
• Manufacturer Part Number: 49-46011-1

Fits 2010-2021 Toyota Tundra models equipped with the V8-5.7L engine and a 145.7-inch wheelbase.

The aFe POWER MACHForce XP cat-back exhaust system is engineered to provide a balance of performance, durability, and value. Constructed from 3-inch mandrel-bent 409 stainless steel tubing, this system offers maximum flow and lower EGTs compared to restrictive factory piping. A 24-inch straight-through muffler absorbs high-pitch tones while maintaining an aggressive exhaust note under acceleration, allowing your V8 to breathe more freely for improved horsepower and torque.

Installation is straightforward using factory mounting locations. The system features OE-style bayonet hangers that remain stable under high heat and vibration, ensuring the exhaust stays in place over time. High-quality OE-style band clamps are included to provide a full 360-degree sealing surface for a leak-free fit. The system is finished with a durable black stainless steel tip for a sleek, custom appearance.

• Tubing: 3-inch mandrel-bent 409 stainless steel for maximum flow
• Muffler: 24-inch free-flowing design for aggressive sound and performance
• Hardware: Includes high-quality OE-style band clamps and bayonet hangers
• Tip: Black stainless steel finish
• Emissions: 50-state legal
• Warranty: 2-year limited warranty
• Manufacturer Part Number: 49-46008-B

Fits 2010-2021 Toyota Tundra models (V8-5.7L) with a 145.7-inch wheelbase.

The aFe POWER MACHForce XP cat-back exhaust system is engineered to provide the perfect balance of performance, durability, and value. Constructed from 3-inch mandrel-bent 409 stainless steel tubing, this system ensures maximum exhaust flow, helping to reduce EGTs while increasing horsepower and torque. The center of the system features a 24-inch long, free-flowing muffler that absorbs high-pitch tones to produce a deep, aggressive exhaust note without sacrificing performance.

Designed for a straightforward installation, this system utilizes factory mounting locations for maximum stability. It includes OE-style bayonet hangers to maintain pipe position even under high-vibration and high-heat conditions. The system is finished with a polished tip and secured with high-quality OE-style band clamps for a leak-free, 360-degree sealing surface.

• 3-inch mandrel-bent 409 stainless steel tubing for optimized flow
• 24-inch long free-flowing muffler for an aggressive sound profile
• Polished exhaust tip for a clean, finished look
• OE-style bayonet hangers and factory mounting locations
• Includes high-quality band clamps for a secure seal
• 50-state legal emissions status
• 2-year limited warranty
• Manufacturer Part Number: 49-46008

Fits 1999-2004 Toyota Tacoma Base, Limited, Pre Runner, and SR5 (L4-2.7L).

The aFe MACHForce XP cat-back exhaust system is engineered to optimize exhaust flow and performance for the 2.7L Toyota Tacoma. This system is constructed from 2.5-inch mandrel-bent stainless steel tubing featuring 100% MIG-welded joints for maximum durability. The free-flow stainless steel muffler utilizes a straight-through design to reduce turbulence and absorb high-pitched tones, resulting in dyno-proven gains of up to +3 HP and +4 lbs. x ft. of torque.

The system is finished with a 4-inch diameter polished stainless steel tip with a laser-etched aFe Power logo for a custom look. Designed for a straightforward installation, the kit includes an OE-style flange and high-quality band clamps to ensure a leak-free seal and a secure fit on the factory mounting points.

• Construction: 2.5-inch Mandrel-Bent Stainless Steel Tubing
• Exit Style: 4-inch Polished Stainless Steel Tip with Laser-Etched Logo
• Performance Gains: +3 Horsepower and +4 Lbs. x Ft. Torque
• Installation: Bolt-on design with OE-style flange and band clamps
• Manufacturer Part Number: 49-46004

Fits 2005-2013 Toyota Tacoma Base, Pre Runner, and X-Runner models (V6-4.0L).

The aFe Power MACH Force XP cat-back exhaust system is engineered to improve flow and performance on your V6-powered Tacoma. This system is constructed from 3-inch mandrel-bent 409 stainless steel tubing for maximum flow and durability, significantly outperforming the factory exhaust. In testing, this setup produced gains of up to 26 horsepower and 30 lbs. x ft. of torque.

Designed for a hassle-free installation, the MACH Force XP uses factory-style hangers and includes all necessary hardware. A high-flow stainless steel muffler provides an aggressive tone while maintaining performance throughout the power band. The system is finished with a polished 304 stainless steel tip for a premium look.

• 3-inch mandrel-bent 409 stainless steel tubing
• 26 HP and 30 lbs. x ft. torque gains
• High-flow muffler with aggressive exhaust note
• Uses factory hanger locations for easy installation
• Polished 304 stainless steel tip
• 50-state emissions legal
• 2-year limited warranty
• Manufacturer Part Number: 49-46001-1P

Fits 2005-2013 Toyota Tacoma Base, Pre Runner, and X-Runner models (V6-4.0L).

Unlock hidden performance and an aggressive exhaust note with the aFe Power MACHForce XP cat-back exhaust system. Specifically engineered for the 4.0L Toyota Tacoma, this system is dyno-proven to deliver gains of up to 26 horsepower and 30 lb-ft of torque by significantly reducing backpressure and improving exhaust flow.

The system is constructed from durable 3-inch mandrel-bent 409 stainless steel tubing for consistent diameters through every curve, maximizing velocity. It features a high-flow, free-flowing muffler that provides a deep, performance tone while maintaining cabin comfort. Designed for a straightforward installation, this kit uses factory hanger locations and includes all necessary hardware. The system is finished with a premium high-temperature black coated stainless steel tip for a rugged, custom appearance.

• Fits 2005-2013 Toyota Tacoma (V6-4.0L)
• 3-inch mandrel-bent 409 stainless steel tubing for maximum flow
• Dyno-proven gains of up to 26 HP and 30 lb-ft of torque
• High-flow muffler delivers an aggressive, performance sound
• OE-style hangers and factory mounting points for hassle-free installation
• Large black coated stainless steel exhaust tip
• 50-state emissions legal
• Manufacturer Part Number: 49-46001-1B
• Includes a 2-year limited warranty

Fits select 2024-2026 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD (V8-6.6L).

Enhance the exhaust flow and appearance of your heavy-duty GM truck with the aFe POWER Large Bore-HD DPF-back exhaust system. This system is built from 5-inch mandrel-bent 409 stainless steel tubing, providing maximum durability and improved exhaust flow over stock. Each system is 100% MIG-welded to ensure race-proven strength that can handle the high temperatures and vibration of heavy towing and diesel performance.

The system is finished with a massive 7-inch diameter black 304 stainless steel clamp-on tip, featuring a riveted aFe POWER logo plate for a distinct custom look. Designed for a precise fit, this exhaust utilizes factory-style hangers and mounts directly to factory locations. Please note that some cutting may be required depending on the specific wheelbase; refer to the provided instructions for details.

• Constructed from 5-inch mandrel-bent 409 stainless steel tubing for maximum flow
• 7-inch diameter black 304 stainless steel clamp-on exhaust tip with logo plate
• 100% MIG-welded for long-term structural integrity
• Utilizes factory-style hangers for a secure, hassle-free installation
• Includes all necessary hardware for a complete setup
• Manufacturer Part Number: 49-44147-B

Fits select 2023-2026 Chevrolet Colorado and GMC Canyon models (L4-2.7L).

The aFe POWER Vulcan Series cat-back exhaust system is engineered for the rigors of off-road terrain. Constructed from 3-inch mandrel-bent 409 stainless steel tubing, this system provides maximum flow and durability for the 2.7L turbocharged engine. A high-flow stainless steel muffler delivers a deep, aggressive tone while unlocking available horsepower and torque. For enthusiasts tackling steep inclines or descents, the Hi-Tuck tip design provides additional ground clearance, protecting your exhaust components from trail damage during extreme climbs.

This direct bolt-on system utilizes factory-style flanges and hangers for a secure fit that requires no cutting or permanent vehicle modifications. Strength is further enhanced by 100% MIG-welded joints and a heavy-duty flex pipe featuring an internal interlock liner for superior durability under stress. Computer-aided design ensures precise vehicle fitment and an easy installation process.

• 3-inch mandrel-bent 409 stainless steel tubing
• High-flow stainless steel muffler for a deep, resonant sound
• Hi-Tuck tip design for superior off-road clearance
• Heavy-duty flex pipe with internal interlock liner
• 100% MIG-welded for race-proven durability
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 49-44143

Fits select 2020-2024 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks (V8-6.6L).

The aFe Power Large Bore-HD DPF-back exhaust system is engineered to optimize exhaust flow and durability for heavy-duty GM trucks. This system is constructed from 5" mandrel-bent 409 stainless steel tubing, providing maximum strength while maintaining smooth exhaust gas transitions. For long-lasting structural integrity, the entire assembly is 100% MIG-welded by hand.

Finishing the system is a massive 6" diameter polished 304 stainless steel intercooled clamp-on exhaust tip, featuring a riveted aFe POWER logo plate. The intercooled design helps reduce temperatures at the tailpipe exit. Installation is straightforward using factory-style hangers that mount directly to OEM locations. Note that some cutting may be required depending on the specific wheelbase configuration.

• Manufacturer Part Number: 49-44125-P
• Material: 5" Mandrel-Bent 409 Stainless Steel Tubing
• Tip Specification: 6" Polished 304 Stainless Steel Intercooled Tip
• Construction: 100% MIG-Welded for race-proven durability
• Fitment Compatibility: Double Cab/Short Bed (149.4" WB), Crew Cab/Short Bed (158.9" WB), Double Cab/Long Bed (162.4" WB), Crew Cab/Long Bed (172" WB)
• Installation: Utilizes factory-style hangers and includes all necessary hardware

Fits select 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 (V8-6.2L) models, including Crew Cab/Short Bed (69.3" box) with 143.5" wheelbase, Crew Cab/Long Bed (78.8" box) with 143.5" wheelbase, and Extended Cab/Long Bed (78.8" box) with 153" wheelbase.

The aFe Apollo GT Series cat-back exhaust system is engineered for maximum exhaust flow and long-term durability. Built from 4-inch mandrel-bent 409 stainless steel tubing, this system reduces restriction compared to stock piping, while the high-flow 409 stainless steel muffler delivers a deep, powerful exhaust note. To ensure structural integrity under stress, the system features a heavy-duty flex pipe with an internal interlock liner and is 100% MIG-welded for race-proven strength.

Designed for a straightforward installation, this direct bolt-on system utilizes factory-style hangers and includes all necessary hardware, requiring no cutting or custom modifications. It is finished with a massive 5-inch diameter polished 409 stainless steel intercooled clamp-on tip, featuring a riveted aFe POWER logo plate for a custom look.

• Material: 4" mandrel-bent 409 stainless steel tubing
• Tip Spec: 5" diameter polished intercooled clamp-on tip
• Muffler: High-flow 409 stainless steel
• Installation: Direct bolt-on using factory hangers
• Construction: 100% MIG-welded with interlock flex pipe
• MPN: 49-44116-P
• Manufacturing: Engineered and manufactured in Corona, California

Fits 2014-2018 Chevrolet Silverado 1500/GMC Sierra 1500 and 2019 Silverado 1500 LD/Sierra 1500 Limited (6.2L).

Upgrade your truck’s breathability and exhaust note with the aFe POWER MACH Force-XP Cat-Back Exhaust System. This system is engineered to optimize exhaust flow and lower EGTs by replacing restrictive factory piping with 3-inch mandrel-bent 409 stainless steel tubing. The larger diameter and smooth bends reduce turbulence, allowing the 6.2L engine to operate more efficiently under load.

Designed for long-term durability and ease of installation, this kit utilizes factory mounting locations and OE-style bayonet hangers to ensure the pipes stay secure even under high-vibration conditions. A free-flowing 24-inch long muffler is included to dampen harsh high-pitch tones while maintaining a deep, aggressive rumble. The system is finished with a massive 4.5-inch black powder-coated tip for a custom look that resists heat and corrosion.

• 3-inch mandrel-bent 409 stainless steel tubing for maximum flow
• 24-inch high-flow muffler delivers an aggressive exhaust note
• 4.5-inch black powder-coated stainless steel exhaust tip
• OE-style bayonet hangers and high-quality band clamps included
• Direct bolt-on installation with no cutting required
• Manufacturer Part Number: 49-44038-B
• 50-state legal

Fits 2003-2006 Hummer H2 Base (V8-6.0L).

The aFe Power MACHForce XP cat-back exhaust system is engineered for maximum flow and durability in demanding environments. Constructed from 4-inch mandrel-bent 409 stainless steel tubing, this system improves flow and helps lower exhaust gas temperatures (EGTs) while increasing horsepower and torque over the restrictive factory exhaust.

This system features a 24-inch high-flow muffler designed to absorb high-pitch tones, producing a deep, powerful sound. For a stable installation that resists shifting under high heat or vibration, the system utilizes OE-style bayonet hangers and high-quality 360-degree band clamps. The kit is a direct bolt-on solution that mounts to factory locations and includes a polished stainless steel tip for a finished look.

• 4-inch mandrel-bent 409 stainless steel tubing for increased flow
• 24-inch long high-flow muffler delivers a powerful exhaust note
• OE-style bayonet hangers maintain stable pipe positioning
• Polished stainless steel exhaust tip included
• Utilizes factory mounting locations for a hassle-free install
• Includes heavy-duty 360-degree band clamps
• Manufacturer Part Number: 49-44010
• 2-year limited warranty

Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the V8-6.6L LMM Duramax diesel engine.

The aFe MACHForce XP DPF-back exhaust system is engineered to optimize exhaust flow and lower exhaust gas temperatures (EGTs) on your heavy-duty GM truck. Constructed from 4-inch mandrel-bent 409 stainless steel tubing, this system provides a significant upgrade over restrictive factory piping. The 24-inch long high-flow muffler is specifically designed to absorb high-pitched tones while maintaining a powerful, deep exhaust note without sacrificing performance.

Installation is a direct bolt-on process using factory mounting locations. The system features heavy-duty OE-style bayonet hangers and a high-quality flange to ensure the pipes remain stable even under high-vibration and high-heat conditions. A polished, intercooled tip provides a clean finish and helps manage heat at the exit point.

• 4-inch mandrel-bent 409 stainless steel tubing for maximum flow
• Straight-through 24-inch muffler delivers a powerful sound and absorbs drone
• Polished intercooled exhaust tip for a premium look and heat management
• Heavy-duty OE-style bayonet hangers and stainless steel band clamps
• High-quality OE-style flange included for a 360-degree seal
• Includes all necessary hardware for a hassle-free installation
• 50-state emissions legal; retains factory DPF and catalytic converter
• Manufacturer Part Number: 49-44004

Fits 2021-2025 Ford Bronco (L4-2.3L / V6-2.7L).

The aFe Apollo GT Series cat-back exhaust system is engineered for Ford Bronco owners who demand both performance and off-road capability. Constructed from 3-inch mandrel-bent 409 stainless steel tubing, this system provides maximum exhaust flow and long-term durability. The high-flow stainless steel muffler is precision-tuned to deliver a deep, aggressive tone while unleashing available horsepower and torque.

Designed for the trail, this system features a hi-tuck tip to provide extra clearance during extreme approach and departure angles, protecting your exhaust components over rough terrain. This is a direct bolt-on system that utilizes factory-style flanges and hangers, requiring no cutting or modifications for a hassle-free installation. Each system is 100% MIG-welded for race-proven strength and longevity.

• 3-inch mandrel-bent 409 stainless steel tubing for maximum durability
• Hi-tuck design increases ground clearance for off-road obstacles
• High-flow stainless steel muffler produces a deep, powerful sound
• 100% MIG-welded for maximum structural integrity
• Direct bolt-on installation using factory mounting points; no cutting required
• Includes all necessary hardware for a secure fit
• Manufacturer Part Number: 49-43135

Fits 2017-2026 Ford F-250 and F-350 Super Duty models (V8-6.2L) with Crew Cab/Short Bed (160" wheelbase).

The aFe Rebel Series cat-back exhaust system is engineered to improve exhaust flow and deliver a powerful, aggressive sound for your Super Duty. Constructed from 3" mandrel-bent 409 stainless steel tubing, this system provides superior durability and strength. It features a high-flow 409 stainless steel muffler and a tuned Helmholtz resonator to achieve a deep, resonant tone while maintaining performance across the power band.

Exiting in front of the rear tire, the system is finished with dual 4-1/2" diameter polished 304 stainless steel clamp-on tips featuring laser-etched aFe POWER logos. This exhaust is a direct bolt-on upgrade, utilizing factory-style flanges and hangers for a secure fit that requires no cutting or modification to your truck.

• 3" mandrel-bent 409 stainless steel tubing for maximum flow
• Dual 4-1/2" polished 304 stainless steel clamp-on tips
• Tuned Helmholtz resonator for an aggressive exhaust note
• High-flow 409 stainless steel muffler
• 100% MIG-welded for race-proven durability
• Direct bolt-on installation; no cutting or modifications required
• Designed specifically for Crew Cab / Short Bed (160" Wheelbase)
• Manufacturer Part Number: 49-43117-P

Fits select 2017-2026 Ford F-250 and F-350 Super Duty models (V8-6.2L / 7.3L) with a Crew Cab / Short Bed (160" Wheelbase).

Constructed from 3-inch mandrel-bent 409 stainless steel tubing, the aFe Rebel Series cat-back exhaust system is engineered for maximum flow and long-term durability. This system features a high-flow 409 stainless steel muffler and an integrated tuned Helmholtz resonator to deliver an aggressive exhaust note without sacrificing in-cabin comfort. The system is finished with dual 4-1/2-inch black 304 stainless steel clamp-on tips featuring a laser-etched aFe POWER logo.

Installation is straightforward and requires no cutting or modifications. The system utilizes a factory-style flange and hangers to bolt directly to your Super Duty's existing mounting points. Every joint is 100% MIG-welded by hand for race-proven strength and precision fitment.

• 3-inch mandrel-bent 409 stainless steel tubing for improved flow
• Tuned Helmholtz resonator provides an aggressive exterior tone while reducing drone
• Dual 4-1/2-inch black 304 stainless steel clamp-on exhaust tips
• Direct bolt-on installation using factory-style flange and hangers
• 100% MIG-welded for maximum durability
• Includes all necessary hardware for installation
• Manufacturer Part Number: 49-43117-B