Fits 2014-2018 Mazda 3 (L4-2.0L / 2.5L) models including Grand Touring, Sport, Touring, and i/s submodels.

The aFe Power Takeda axle-back exhaust system is engineered to optimize exhaust flow and provide a deep, resonant tone for your Mazda 3. This system is a direct bolt-on replacement for the factory muffler, utilizing factory-style flanges and hangers for a secure fit that requires no cutting or permanent vehicle modifications. In dyno testing, this system produced gains of up to +6.45 HP and +8.12 lbs. x ft. of torque.

Construction features 2-1/2-inch mandrel-bent 304 stainless steel tubing for maximum durability and corrosion resistance. To minimize turbulence and maintain high exhaust velocity, the system uses a mitered merge collector. The assembly is 100% MIG-welded for race-proven strength and finished with dual 4-1/2-inch diameter carbon fiber tips with 304 stainless steel clamp-on bases and laser-etched logos.

• Dual 4-1/2" carbon fiber 304 stainless steel clamp-on exhaust tips
• Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing
• Dyno-tested gains of up to +6.45 HP and +8.12 lbs. x ft. torque
• 100% MIG-welded for maximum strength and durability
• Utilizes factory-style flange and hangers for a hassle-free bolt-on installation
• Mitered merge collector reduces turbulence and increases velocity
• Manufacturer Part Number: 49-37014-C

Fits select 2019-2022 Hyundai Veloster and Veloster N (L4-2.0L).

Improve the exhaust flow and durability of your Veloster with the aFe POWER mid pipe. This system is engineered as a direct bolt-on replacement for the restrictive factory mid-section, utilizing existing hangers and factory-style flanges to ensure a precise, high-tolerance fit. Designed using state-of-the-art computer-aided technology, it requires no cutting or modifications to your vehicle for a hassle-free installation.

This mid pipe is constructed from 3-inch mandrel-bent 304 stainless steel tubing for maximum strength and corrosion resistance. To ensure race-proven longevity, the assembly is 100% MIG-welded. Each system is engineered and manufactured at the aFe POWER facility in Corona, California, and includes all necessary hardware for a complete install.

• 3" mandrel-bent 304 stainless steel tubing for maximum flow and durability
• 100% MIG-welded for superior strength
• Direct bolt-on design utilizes factory style flanges and hangers
• CAD-designed for high-tolerance factory fitment
• Includes all necessary installation hardware
• No CARB EO# required
• Manufacturer Part Number: 49-37006

Fits 2017-2025 Alfa Romeo Giulia models (L4-2.0L).

The aFe Power Mach Force-Xp cat-back exhaust system is engineered to optimize exhaust flow and sound for the Alfa Romeo Giulia. This system is constructed from 3-inch to 2-1/2-inch mandrel-bent 304 stainless steel tubing for maximum durability and corrosion resistance. In-house dyno testing resulted in performance gains of up to +12 horsepower and +15 lbs. x ft. of torque by improving exhaust scavenging and reducing backpressure.

This system features a high-flow 304 stainless steel muffler that delivers a refined, mild exhaust note. A mitered merge collector is utilized to decrease turbulence and increase exhaust velocity, resulting in improved throttle response. For long-term structural integrity, the assembly is 100% MIG-welded and includes a heavy-duty flex pipe equipped with an internal interlock liner. Designed for a precise fit, this system utilizes factory-style flanges and hangers for a direct bolt-on installation with no cutting required.

• Up to +12 HP and +15 lbs. x ft. TQ gains
• 304 stainless steel mandrel-bent tubing (3" to 2.5")
• Mitered merge collector increases exhaust velocity
• Heavy-duty flex pipe with internal interlock liner
• High-flow muffler provides a mild sound profile
• Direct bolt-on fitment with factory-style mounting
• Manufacturer Part Number: 49-36903

Fits 2017-2025 Alfa Romeo Giulia (L4-2.0L).

Unleash the performance and sound potential of your Giulia with the aFe Power Mach Force-Xp axle-back exhaust system. Engineered specifically for the 2.0L turbocharged engine, this system delivers dyno-proven gains of up to +10 HP and +12 lbs. x ft. of torque. A mitered merge collector is utilized to reduce exhaust turbulence and increase velocity, resulting in improved throttle response and a more aggressive exhaust note.

This exhaust is constructed from 3-inch to 2-1/2-inch mandrel-bent 304 stainless steel tubing, ensuring maximum flow and superior corrosion resistance. Every system is 100% MIG-welded for race-proven durability. Designed using state-of-the-art computer-aided design technology, it provides a high-tolerance factory fitment that utilizes factory-style hangers and requires no cutting or modifications for a true bolt-on installation.

• Direct bolt-on installation with no cutting or modifications required
• Constructed from 3" to 2-1/2" mandrel-bent 304 stainless steel tubing
• Performance gains: Up to +10 HP and +12 lbs. x ft. Torque
• 100% MIG-welded for maximum strength and durability
• Mitered merge collector improves exhaust flow and velocity
• Uses factory-style hangers for a secure, OEM-grade fit
• Manufacturer Part Number: 49-36902

Fits 2020-2025 Subaru Outback Base, Limited, Onyx Edition, Premium, and Touring models (H4-2.5L).

The aFe POWER Takeda cat-back exhaust system is engineered to provide your Subaru Outback with improved flow and a deeper exhaust note while maintaining essential off-road clearance. Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, this system is designed for maximum corrosion resistance and durability. The integrated Hi-Tuck tip is specifically developed for outdoor enthusiasts, providing additional clearance during extreme angle climbs or descents to protect your exhaust components on rough terrain.

This system features a high-flow 304 stainless steel muffler and is 100% MIG-welded for race-proven strength. Installation is straightforward and hassle-free, utilizing factory-style flanges and hangers for a direct bolt-on fit that requires no cutting or permanent vehicle modifications.

• Manufacturer Part Number: 49-36808
• Material: 2-1/2" Mandrel-Bent 304 Stainless Steel
• Muffler: High-Flow 304 Stainless Steel
• Design: Hi-Tuck Tip for increased ground clearance
• Installation: Direct Bolt-On with factory-style hangers
• Construction: 100% MIG-Welded

Fits 2015-2019 Subaru Outback 2.5i, Limited, Premium, and Touring models (H4-2.5L).

This Takeda cat-back exhaust system is engineered to improve exhaust flow and provide a deep, resonant tone for your Subaru Outback. Built from 2.5-inch mandrel-bent 304 stainless steel tubing, this system offers superior corrosion resistance and durability. The design features a high-flow 304 stainless steel muffler and is 100% MIG-welded for race-proven strength. The specialized Hi-Tuck design provides additional ground clearance, protecting your exhaust components when navigating rough terrain or off-road conditions.

Designed for a hassle-free installation, this system utilizes factory-style flanges and hangers to ensure a secure, direct bolt-on fit without the need for cutting or permanent modifications to your vehicle.

• Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing
• High-flow 304 stainless steel muffler produces a deep, aggressive sound
• Hi-Tuck design for increased ground clearance over rough terrain
• 100% MIG-welded for maximum durability and strength
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 49-36807

Fits 2010-2014 Subaru Outback 2.5i, 2.5i Limited, and 2.5i Premium (H4-2.5L).

The aFe POWER Takeda cat-back exhaust system is engineered to improve flow and durability for the 2.5L Outback. Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing, this system provides maximum strength and corrosion resistance. The high-flow 304 stainless steel muffler is tuned to produce a deep, resonant tone while unleashing horsepower and torque potential.

Designed for the adventurer, this system features a Hi-Tuck tip developed to provide extra ground clearance during extreme angle climbs or descents, protecting your exhaust components over rough terrain. This system is 100% MIG-welded for race-proven durability and uses computer-aided design (CAD) to ensure a precise, factory-level fit.

• Direct Bolt-On: Utilizes factory-style flanges and hangers for a hassle-free installation with no cutting or modifications required.
• Premium Materials: 304 stainless steel tubing and muffler for long-lasting performance in harsh conditions.
• Hi-Tuck Design: Optimized for off-road clearance and protection.
• Precision Manufacturing: 100% MIG-welded and CAD-designed for perfect fitment.
• Manufacturer Part Number: 49-36806

Fits 2014-2018 Subaru Forester XT (H4-2.5L).

Improve your vehicle's exhaust flow and sound with the aFe Takeda cat-back exhaust system. This premium system is engineered from 2-1/2 inch to 2-1/4 inch mandrel-bent 304 stainless steel tubing, providing maximum durability and optimal flow characteristics. The high-flow 304 stainless steel mufflers feature a polished finish for superior corrosion resistance and are tuned to produce a deep, performance-oriented exhaust note. For a custom look, the system is finished with dual 4-inch diameter black 304 stainless steel clamp-on tips, complete with laser-etched Takeda logos.

Built for a precise factory-style fit, this system utilizes CNC-machined flanges and factory-style hangers to ensure a secure, direct bolt-on installation with no cutting or modifications required. Every joint is 100% MIG-welded to provide the race-proven strength and structural integrity demanded by performance enthusiasts.

• Constructed from 2-1/2" and 2-1/4" mandrel-bent 304 stainless steel tubing
• Dual 4" diameter black 304 stainless steel clamp-on exhaust tips with laser-etched logos
• High-flow polished 304 stainless steel mufflers for a deep, resonant sound
• Utilizes factory-style flange and hangers for a secure, hassle-free fitment
• 100% MIG-welded for maximum durability and strength
• Manufacturer Part Number: 49-36804-B

Fits 2018-2023 Subaru Crosstrek models (H4-2.0L) across Base, Hybrid, Limited, Premium, and Sport trims.

The Takeda Cat-Back Exhaust System by aFe POWER is engineered to improve exhaust flow and deliver a deeper, more aggressive engine note. Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing, this system provides superior corrosion resistance and durability compared to factory components. Each system is 100% MIG-welded and features a high-flow stainless steel muffler and resonator designed using computer-aided technology to ensure precise, bolt-on fitment.

• 2.5-inch mandrel-bent 304 stainless steel tubing for maximum exhaust velocity
• Includes high-flow stainless steel muffler and resonator for a refined, deeper tone
• 100% MIG-welded for long-lasting structural integrity
• Computer-aided design (CAD) ensures a precise, hassle-free installation
• Complete with all necessary hardware and clamps
• Manufacturer Part Number: 49-36803

Fits 2015-2021 Subaru WRX and WRX STI (2.0L / 2.5L / H4-2.0L).

Optimize your Subaru's exhaust flow and acoustic profile with the aFe Takeda cat-back exhaust system. This performance system is engineered from 3-inch mandrel-bent 304 stainless steel tubing that transitions into dual 2-1/4-inch pipes. It features a mitered merge collector designed to evenly distribute exhaust gases, reducing turbulence and backpressure. In dyno testing, this configuration produced gains of up to +14 horsepower and +22 lbs. x ft. of torque.

Constructed for long-term durability, the system is 100% TIG-welded by certified craftsmen and utilizes dual high-flow 304 stainless steel mufflers to deliver an aggressive tone without sacrificing daily drivability. The system is finished with quad 3-1/2-inch high-luster polished tips featuring laser-etched Takeda logos. This is a direct bolt-on assembly that requires no cutting or modifications to the factory chassis.

• Manufacturer Part Number: 49-36801-P
• Material: 304 Stainless Steel
• Tubing Diameter: 3" to dual 2-1/4"
• Tip Size: Quad 3-1/2" Polished Stainless Steel
• Gains: +14 HP / +22 lbs. x ft. Torque
• Installation: Direct bolt-on; includes all necessary hardware

Fits 2022-2026 Honda Civic Sport (L4-2.0L).

Unlock the performance and acoustic potential of your Honda Civic with the aFe POWER Takeda cat-back exhaust system. This system is engineered for maximum flow and durability, utilizing 2-1/2 inch mandrel-bent 304 stainless steel tubing to reduce backpressure compared to the factory equipment. The result is a deeper, more aggressive exhaust note and improved throttle response across the RPM range.

This direct bolt-on system is designed for a hassle-free installation, utilizing high-quality 100% MIG-welded construction and factory-style flanges and hangers. No cutting or permanent vehicle modifications are required. Finishing the system are dual 3-inch clamp-on polished 304 stainless steel tips featuring laser-etched Takeda logos for a refined aesthetic.

• Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing for corrosion resistance and flow
• Dual 3-inch diameter polished 304 stainless steel clamp-on tips
• 100% MIG-welded for race-proven structural integrity
• Direct bolt-on fitment using factory-style hangers and flanges
• Includes all necessary hardware for installation
• Manufacturer Part Number: 49-36631-P

Fits 2009-2014 Acura TSX Base and Special Edition (L4-2.4L).

The aFe Takeda cat-back exhaust system is engineered to optimize flow and sound for the 2.4L Acura TSX. This system is constructed from 2.5-inch to 2.25-inch mandrel-bent 304 stainless steel tubing with a brushed finish for maximum durability and corrosion resistance. The design utilizes a mitered merge collector to reduce exhaust turbulence and increase velocity, improving throttle response and power across the RPM range.

High-flow 304 stainless steel mufflers deliver a deep, refined tone, while the polished finish ensures long-lasting aesthetics. The system is capped with dual 4.5-inch Blue Flame 304 stainless steel clamp-on tips featuring a laser-etched Takeda logo. Built for a hassle-free installation, this system is 100% TIG-welded and utilizes factory-style flanges and hangers for a precise, direct-fit bolt-on experience with no cutting or modifications required.

• Manufacturer Part Number: 49-36629-L
• Material: Brushed 304 Stainless Steel
• Tubing Diameter: 2.5-inch into 2.25-inch
• Tip Size: Dual 4.5-inch Blue Flame stainless steel clamp-on tips
• Construction: 100% TIG-welded for race-proven strength
• Installation: Direct bolt-on using factory mounting points
• Feature: High-flow mufflers with a mitered merge collector

Fits 2008-2012 Honda Accord EX and EX-L models (V6-3.5L).

The Takeda cat-back exhaust system by aFe Power is engineered to optimize exhaust flow and provide a deep, aggressive tone for the Honda Accord. This dual transverse exhaust system is constructed from mandrel-bent 304 stainless steel tubing, transitioning from 2.25in to dual 2in diameters for maximum performance across the power band. The system is TIG-welded for maximum strength and durability, featuring dual free-flowing transverse mufflers designed to absorb high-pitch tones while unleashing available horsepower and torque.

• Mandrel-bent 304 stainless steel construction for corrosion resistance and improved flow
• TIG-welded for superior weld strength and longevity
• Dual free-flowing transverse mufflers produce a powerful, aggressive exhaust note
• Massive oval double-wall polished exhaust tips for a premium look
• Uses factory mounting locations for a stable, hassle-free installation
• Includes high-quality band clamps for a complete 360-degree, leak-free seal
• Manufacturer Part Number: 49-36612

Fits 2006-2011 Honda Civic (DX, EX, EX-L, GX, LX, LX-S) with the L4-1.8L engine.

The Takeda Axle-Back Exhaust System by aFe Power is engineered and manufactured in Corona, California, to deliver a refined look and a more aggressive tone. This system is constructed from 2.5-inch mandrel-bent 304 stainless steel tubing for maximum durability and corrosion resistance. By utilizing dual free-flowing mufflers, the system absorbs high-pitch tones to produce a deep, powerful exhaust note while reducing backpressure.

Designed for a direct-fit installation, this axle-back system bolts onto factory mounting locations for a secure fit without the need for custom fabrication. High-quality OE-style flanges and band clamps are included to ensure a complete 360-degree, leak-free seal. The system is finished with a polished 304 stainless steel tip for a premium appearance.

• Material: 2.5-inch 304 stainless steel mandrel-bent tubing
• Mufflers: Dual free-flowing 304 stainless steel mufflers
• Tip: Polished 304 stainless steel exhaust tip
• Installation: Direct bolt-on using factory mounting points
• Hardware: Includes OE-style flanges and band clamps for a leak-free seal
• Origin: Designed and manufactured in Corona, California
• Manufacturer Part Number: 49-36610

Fits 2013-2017 Honda Accord EX-L and Touring models (V6-3.5L).

The Takeda Mid-Pipe Exhaust System by aFe Power is engineered to optimize exhaust flow and improve performance across the power band for the Honda Accord V6. This system replaces restrictive factory piping with 2.5-inch mandrel-bent 304 stainless steel tubing, providing a more aggressive tone while maintaining durability. In testing, this mid-pipe produced an additional 2 horsepower and 3 lb-ft of torque when combined with the Takeda Axle-Back Exhaust System (P/N 49-36607).

Built for a precise fit and longevity, the system is TIG-welded and features a brushed finish. To ensure a refined driving experience, aFe integrated a 4-inch diameter 304 stainless steel resonator that maximizes flow while effectively eliminating exhaust drone. This mid-pipe is a direct bolt-on upgrade, utilizing OE-style flanges and factory hanger locations for a hassle-free installation without the need for vehicle modifications.

• Fits 2013-2017 Honda Accord EX-L and Touring models (V6-3.5L)
• Constructed from 2.5-inch mandrel-bent 304 stainless steel
• Includes a 4-inch diameter resonator to eliminate exhaust drone
• TIG-welded with a brushed finish for maximum strength and corrosion resistance
• Direct bolt-on installation using factory hanger locations and OE-style flanges
• Optimized for use with Takeda axle-back systems
• Manufacturer Part Number: 49-36608

Fits 2013-2017 Honda Accord EX, EX-L, LX, and Sport models (L4-2.4L).

Enhance your Honda Accord’s performance and exhaust note with the aFe Takeda Dual Cat-Back Exhaust system. This system is engineered to replace the restrictive factory exhaust, utilizing mandrel-bent 304 stainless steel tubing that transitions from 2-1/2" to 1-3/4" to maximize exhaust flow. These improvements deliver dyno-verified gains of up to +13 horsepower and +16 lbs. x ft. of torque, providing better throttle response and a more aggressive tone throughout the RPM range.

Constructed for longevity and precision, this exhaust system is 100% hand TIG-welded by skilled craftsmen. It features dual high-flow 304 stainless steel mufflers that produce a deep, sporty sound without compromising durability. The system is finished with dual, oval, angle-cut black tips etched with the Takeda logo for a refined, custom appearance.

• Direct-fit for 2013-2017 Honda Accord Sedan L4-2.4L
• Mandrel-bent 304 stainless steel tubing for maximum flow
• Dual high-flow mufflers deliver an aggressive exhaust note
• Dual oval, angle-cut black tips with etched Takeda logo
• 100% hand TIG-welded for superior strength
• Manufacturer Part Number: 49-36605-B

Fits 2013-2017 Honda Accord EX, EX-L, LX, LX-S, Sport, and Sport Special Edition models (L4-2.4L).

The aFe Takeda dual cat-back exhaust system is engineered to convert the standard L4 single exhaust into a high-performance dual-exit setup. Built from 2.5-inch mandrel-bent 304 stainless steel tubing, this system utilizes an OE-style flange and mitered collectors to minimize turbulence and optimize flow. During manufacturer testing, this setup produced gains of 13 horsepower and 16 lbs. x ft. of torque. The 100% TIG-welded construction ensures long-term durability and precise fitment.

Acoustics are managed by dual high-flow 304 stainless steel mufflers, delivering an aggressive tone at high RPM while maintaining a subtle presence at cruising speeds. The system is finished with Takeda laser-etched, double-wall, angle-cut polished tips for a refined aesthetic. This is a direct bolt-on system that requires no cutting or drilling and includes all necessary hardware for a straightforward installation.

• Manufacturer Part Number: 49-36605
• Material: 304 Stainless Steel
• Tubing Diameter: 2.5-inch mandrel-bent
• Exit Style: Dual rear exit with polished tips
• Performance Gains: +13 HP / +16 lbs. x ft. Torque
• Installation: Direct bolt-on with OE-style flanges and band clamps
• Construction: 100% TIG-welded for maximum strength

Fits select 2013-2017 Honda Accord EX, EX-L, LX, LX-S, Sport, and Touring models (2.4L / L4-2.4L).

The Takeda Axle-Back Exhaust System by aFe is engineered to unlock performance and a more aggressive sound for your Honda Accord. During testing, this system produced gains of up to 7 horsepower and 7 lbs. x ft. of torque. It features 2.25-inch mandrel-bent 304 stainless steel tubing that merges into dual 1.75-inch tubing, optimizing exhaust flow across the power band while maintaining a refined tone.

Built for long-term durability and style, this TIG-welded system includes dual high-flow polished mufflers and dual double-wall, angle-cut 304 stainless steel tips featuring laser-etched Takeda logos. It utilizes an OE-style flange and factory mounting locations for a direct-fit installation with no cutting or modifications required.

• Manufacturer Part Number: 49-36604
• Material: Mandrel-bent 304 stainless steel
• Tubing Diameter: 2.25 in. into dual 1.75 in.
• Performance Gains: +7 HP / +7 lbs. x ft. torque
• Finish: Brushed tubing with polished mufflers and tips
• Tips: Dual double-wall, angle-cut laser-etched tips
• Installation: Reuses factory hanger locations; no modifications required

Fits 2012-2015 Honda Civic (L4-1.8L) models including DX, EX, EX-L, GX, HF, LX, Natural Gas, and SE.

The aFe Power Takeda Axle-Back Exhaust System is engineered and manufactured in Corona, California, to provide a significant upgrade in sound and flow for your Honda Civic. Constructed from 2.5-inch 304 stainless steel tubing, this system features 100% hand TIG-welding for maximum durability and strength. The dual free-flowing mufflers are designed to eliminate high-pitched tones, resulting in a deeper, more aggressive exhaust note while unlocking gains of up to 3 horsepower and 3 ft./lbs. of torque.

This system is a direct bolt-on solution, utilizing factory mounting locations and hangers for a hassle-free installation with no modifications required. It is finished with a 3.5-inch diameter double-wall, slash-cut polished tip for a refined look. Every kit includes high-quality OE-style flanges and band clamps to ensure a secure, 360-degree seal.

• Manufacturer Part Number: 49-36603
• Material: 304 Stainless Steel
• Tubing Diameter: 2.5 inches
• Tip Size: 3.5-inch polished double-wall slash-cut tip
• Performance Gains: +3 HP / +3 ft./lbs. Torque
• Installation: Bolt-on using factory hanger locations
• Construction: 100% hand TIG-welded
• Warranty: 2-year limited warranty

Fits 2010-2025 Mercedes-Benz Sprinter 2500 and 3500 Base models.

Enhance your Sprinter’s exhaust system with the aFe Vulcan Series DPF-back exhaust. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system provides superior flow and long-term durability. It is finished with a 4-inch polished 304 stainless steel clamp-on tip, featuring a laser-etched aFe POWER logo for a professional look.

This system is designed for versatility, offering both side-exit and rear-exit tailpipe configurations to effectively clear exhaust gases from beneath the vehicle. Installation is a direct bolt-on process that utilizes factory-style hanger mounting points, requiring no cutting or permanent modifications to your chassis.

• 3-inch mandrel-bent 304 stainless steel tubing for maximum durability
• 4-inch polished 304 stainless steel clamp-on exhaust tip
• Selectable side-exit or rear-exit tailpipe configurations
• 100% MIG-welded for race-proven strength
• Direct bolt-on installation; no cutting or modifications required
• Utilizes factory mounting points for secure fitment
• Manufacturer Part Number: 49-36502-P

Fits 2010-2025 Mercedes-Benz Sprinter 2500 and 3500 Base models.

The aFe Vulcan Series DPF-back exhaust system is engineered for long-term durability and optimized exhaust flow. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system provides maximum strength and superior corrosion resistance. The assembly is 100% MIG-welded for race-proven durability, ensuring it withstands the heavy-duty demands of commercial use or off-road exploration.

This exhaust system is finished with a 4-inch diameter black 304 stainless steel clamp-on tip, featuring a laser-etched aFe POWER logo. For maximum versatility, the kit offers the choice of side-exit or rear-exit tailpipe configurations to effectively evacuate exhaust gases. Utilizing factory-style hanger mounting points, this direct bolt-on system allows for a hassle-free installation without the need for cutting or permanent vehicle modifications.

• 3-inch mandrel-bent 304 stainless steel tubing for maximum flow
• 4-inch black 304 stainless steel clamp-on exhaust tip
• Versatile side-exit or rear-exit tailpipe options
• Direct bolt-on installation using factory mounting points
• 100% MIG-welded for industrial-grade strength
• CAD-designed for precise vehicle-specific fitment
• Manufacturer Part Number: 49-36502-B

Fits 2002-2008 Mercedes-Benz G500 Base (L6-3.0L).

The aFe Vulcan Series cat-back exhaust system is engineered to provide a deep, resonant exhaust note for the Mercedes-Benz G-Class while maintaining minimal interior cabin drone. This system is constructed from 2.5-inch mandrel-bent 304 stainless steel tubing to ensure maximum flow, strength, and corrosion resistance in demanding conditions. Dual 6-inch round by 18-inch long high-flow 304 stainless steel mufflers are utilized to optimize performance and sound quality.

Built for durability, the entire system is 100% MIG-welded for race-proven structural integrity. It is designed as a direct bolt-on solution, utilizing factory-style hangers for a secure fit without the need for cutting or custom modifications, ensuring a hassle-free installation process.

• Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing
• Dual 6" round x 18" long high-flow 304 stainless steel mufflers
• 100% MIG-welded for maximum strength and durability
• Direct bolt-on installation using factory-style hangers
• No cutting or vehicle modifications required
• Manufacturer Part Number: 49-36501

Fits select 2006-2022 Audi Q5 and BMW 325i, 325xi, 328i, 328xi, and 328i xDrive (L4-2.0L).

The aFe MACH Force-Xp cat-back exhaust system is engineered to optimize exhaust flow and durability. Constructed from high-strength mandrel-bent stainless steel tubing, this system transitions from 3-inch to 2.5-inch diameters to maintain exhaust velocity while reducing backpressure. The included high-flow stainless steel muffler is designed to deliver a deeper, more aggressive tone without compromising structural integrity.

Designed for a precise fit and straightforward installation, this system utilizes factory-style flanges and hangers to ensure a secure mount to your vehicle's existing points. Every joint is 100% MIG-welded for the maximum strength required for long-term performance.

• Manufacturer Part Number: 49-36447
• Tubing Diameter: 3-inch to 2.5-inch stepped design
• Material: Mandrel-bent stainless steel
• Construction: 100% MIG-welded for durability
• Muffler: High-flow stainless steel unit for a deepened tone
• Fitment: Utilizes factory-style flanges and hangers

Fits 2013-2016 Audi allroad models (Premium, Premium Plus, and Prestige).

Upgrade the exhaust note and flow of your Audi with the aFe MACH Force-Xp axle-back exhaust system. This system is engineered for a precise, high-tolerance fit using computer-aided design, providing a direct bolt-on installation that utilizes factory-style hangers. Constructed from 3-inch to 2-1/2-inch mandrel-bent 304 stainless steel tubing, this system offers maximum durability and corrosion resistance. The high-flow 304 stainless steel polished muffler is designed to unleash horsepower and torque while delivering a sophisticated, mild exhaust sound. The system is finished with dual 4-inch diameter polished 304 stainless steel clamp-on tips featuring laser-etched aFe POWER logos.

• Manufactured from 3-inch into dual 2-1/2-inch mandrel-bent 304 stainless steel tubing
• Dual 4-inch polished 304 stainless steel clamp-on tips with laser-etched logos
• High-flow polished muffler provides a mild, refined exhaust tone
• 100% MIG-welded for race-proven strength and longevity
• Direct bolt-on fitment requires no cutting or modifications to factory components
• Includes all necessary hardware for a hassle-free installation
• Manufacturer Part Number: 49-36437-P

Fits select 2009-2016 Audi A4, A5, allroad, and Q5 (L4-2.0L).

Enhance the exhaust note and flow of your Audi with the aFe POWER MACH Force-Xp front resonator delete pipe. This system replaces the restrictive factory resonator with 3-inch mandrel-bent 304 stainless steel tubing, delivering a moderate, aggressive tone without requiring permanent vehicle modifications.

Designed for durability and precise fitment, this mid-pipe features a heavy-duty flex pipe with an internal interlock liner to manage engine movement and vibration. The assembly is 100% MIG-welded for maximum strength and utilizes a factory-style flange to ensure a secure, leak-free connection to your existing exhaust components.

• Constructed from 3-inch mandrel-bent 304 stainless steel tubing for maximum durability
• Direct bolt-on installation with no cutting or modifications required
• Heavy-duty flex pipe with internal interlock liner for added strength
• 100% MIG-welded construction for race-proven longevity
• Utilizes a factory-style flange for a high-tolerance OE fit
• All necessary hardware included for a hassle-free installation
• Manufacturer Part Number: 49-36428

Fits 2021-2024 BMW 228i Gran Coupe (2.0T).

Improve the exhaust flow and acoustic profile of your BMW with the aFe Power MACH Force-XP axle-back exhaust system. This system is engineered from 3-inch to 2-1/2-inch mandrel-bent 304 stainless steel tubing with a brushed finish for superior durability and corrosion resistance. The high-flow, polished 304 stainless steel muffler is designed to unleash a more powerful sound while maximizing available horsepower and torque. The system is finished with dual 4-1/2-inch diameter black 304 stainless steel clamp-on tips featuring laser-etched aFe POWER logos.

Built for long-term performance, this system is 100% TIG-welded and utilizes factory-style hangers for a secure fit. While the system mounts directly to factory mounting locations, please note that some cutting of the factory exhaust is required for installation.

• Constructed from 3" to 2-1/2" mandrel-bent brushed 304 stainless steel tubing
• Dual 4-1/2" diameter black 304 stainless steel clamp-on exhaust tips
• High-flow polished 304 stainless steel muffler for aggressive sound
• 100% TIG-welded for race-proven strength
• Utilizes factory-style hangers for a secure fit
• Manufacturer Part Number: 49-36355-B

Fits 2006-2008 BMW Z4 M Coupe and M Roadster (L6-3.2L).

Unleash the full potential of your S54 engine with the aFe MACH Force-Xp cat-back exhaust system. This premium exhaust is constructed from 2-1/2" mandrel-bent 304 stainless steel tubing to maximize exhaust flow and reduce turbulence compared to the factory equipment. During in-house dyno testing, this system produced gains of up to +7 horsepower and +15 lbs. x ft. of torque.

Engineered for both performance and durability, the system features dual high-flow 304 stainless steel mufflers that deliver a smooth, aggressive tone while eliminating unwanted cabin drone. Every joint is 100% hand TIG-welded for race-proven strength. For a precise, stable fit, aFe uses OE-style bayonet hangers that maintain pipe location even under high heat and vibration. This is a true bolt-on system, requiring no cutting or modifications for a hassle-free installation.

• Construction: 2-1/2" mandrel-bent 304 stainless steel tubing for maximum flow
• Mufflers: Dual high-flow 304 stainless steel performance mufflers
• Exit Style: Quad rear exit with 3" angle-cut polished stainless steel tips
• Welding: 100% hand TIG-welded for maximum durability
• Installation: Direct bolt-on design with no cutting required
• Hardware: Includes high-quality clamps and bayonet-style hangers
• MPN: 49-36339-P

The aFe Takeda axle-back exhaust system delivers an aggressive acoustic profile and enhanced aesthetics for the Nissan Z. This system is engineered from 2.5-inch mandrel-bent 304 stainless steel tubing with a brushed finish to ensure maximum flow and long-term corrosion resistance. For superior structural integrity, the entire assembly is 100% TIG-welded to meet race-proven standards.

This system is finished with dual 4.5-inch Blue Flame stainless steel clamp-on tips featuring laser-etched Takeda logos. As a direct bolt-on upgrade, it utilizes factory-style flanges and hangers, allowing for a straightforward installation that requires no cutting or permanent vehicle modifications.

• Tubing: 2-1/2 inch mandrel-bent 304 stainless steel for durability and flow
• Tips: Dual 4-1/2 inch Blue Flame stainless steel clamp-on tips with Takeda logo
• Construction: 100% TIG-welded for maximum strength and precision
• Installation: Direct bolt-on utilizing OE mounting points and hangers
• Finish: Brushed 304 stainless steel
• Manufacturer Part Number: 49-36137-L

Fits 2023-2025 Nissan Z (V6-3.0L) Sport, Performance, Proto Spec, and Nismo models.

The Takeda axle-back exhaust system for the Nissan Z is engineered to provide an aggressive sound and improved flow without the complexity of a full cat-back install. This system is constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing with a brushed finish, ensuring maximum durability and corrosion resistance. Every joint is 100% TIG-welded by hand for race-proven strength.

Finishing the system are dual 4-1/2 inch diameter carbon fiber clamp-on exhaust tips featuring the aFe POWER logo. Designed as a direct bolt-on upgrade, it utilizes factory-style flanges and hangers to ensure a secure fit and a hassle-free installation that requires no cutting or modifications to your vehicle.

• Manufacturer Part Number: 49-36137-C
• 2.5-inch mandrel-bent 304 stainless steel tubing
• Dual 4.5-inch carbon fiber stainless steel clamp-on tips
• 100% TIG-welded for superior strength and longevity
• Direct bolt-on fitment using factory mounting points
• Includes all necessary installation hardware

Upgrade your vehicle's performance and presence with the aFe Takeda 2.5in 304 Stainless Steel Cat-Back Exhaust System. Fits 2016-2024 Infiniti Q50 models equipped with the V6-3.0L engine. This high-flow system is engineered for durability and precision, utilizing 100% TIG-welded construction for maximum strength and corrosion resistance.

This dual rear-exit system features 4-1/2 inch round, double-wall, black clamp-on stainless steel exhaust tips finished with a laser-etched Takeda logo for a refined, custom appearance. The modular design is built for a hassle-free installation, bolting directly to factory mounting locations without the need for cutting or permanent modifications. This system replaces the restrictive factory exhaust to improve flow and provide a more aggressive acoustic profile.

• Fits 2016-2024 Infiniti Q50 (V6-3.0L)
• 2.5-inch 304 stainless steel mandrel-bent tubing
• Dual 4-1/2 inch black double-wall stainless steel tips
• 100% TIG-welded for superior strength and longevity
• Modular design utilizes stock mounting locations for easy bolt-on installation
• Manufacturer Part Number: 49-36132NM-B