Fits 2014-2024 Infiniti Q50 and 2014-2022 Infiniti Q60 models (V6-3.0L).

Enhance exhaust velocity and sound on your Infiniti with the aFe Power Takeda Y-pipe and mid-pipe system. This modular system replaces restrictive factory tubing and mufflers with high-flow 304 stainless steel. On the dyno, this setup produced gains of up to +6 horsepower and +5 lb-ft of torque by optimizing flow path and reducing backpressure.

Constructed from mandrel-bent 304 stainless steel, the system transitions from 2.5-inch inlets into a 3-inch collector for maximum efficiency. Every joint is 100% hand TIG-welded for race-proven strength and longevity. Designed as a direct bolt-on solution, it utilizes factory mounting locations and requires no cutting or permanent modifications to your vehicle.

• Dyno-proven gains of up to +6 HP and +5 lbs. x ft. TQ
• 2.5-inch to 3-inch mandrel-bent 304 stainless steel tubing
• Includes resonator delete pipes for an aggressive exhaust note
• Hand TIG-welded for maximum durability and weld integrity
• Direct bolt-on fitment with no cutting or drilling required
• Modular design compatible with Takeda and factory components
• Manufacturer Part Number: 49-36131

Fits select 2011-2024 Nissan Armada and INFINITI QX56/QX80 (V8-5.6L).

The aFe MACH Force-Xp cat-back exhaust system (MPN 49-36120) is engineered to optimize performance, durability, and ground clearance. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system minimizes restriction and improves exhaust flow over factory components. The Hi-Tuck design is specifically developed to position the tailpipe for maximum clearance, preventing contact during steep approach and departure angles.

To deliver a deep, aggressive tone without excessive high-pitch drone, the system utilizes a 22-inch long, free-flowing muffler finished in high-temperature black powder coating. Installation is simplified by using all factory mounting locations, and the included OE-style bayonet hangers ensure the exhaust remains stable even under high heat and vibration conditions.

• Construction: 3-inch mandrel-bent 304 stainless steel tubing for corrosion resistance and flow efficiency.
• Hi-Tuck Design: Provides extra ground clearance for off-road climbs and descents.
• Muffler: 22" free-flowing stainless steel muffler with high-temp black powder coating.
• Secure Sealing: OE-style flanges and premium 360-degree band clamps eliminate leak paths.
• Installation: Direct-fit system utilizes factory mounting points and bayonet-style hangers.
• Part Number: 49-36120

Fits select 2011-2024 Nissan Armada and Infiniti QX56/QX80 (V8-5.6L).

The aFe Power MACH Force-Xp Cat-Back exhaust system is engineered to outperform the restrictive factory setup on your V8-powered SUV. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system provides maximum flow and durability. The heart of the system is a 22-inch length, high-flow stainless steel muffler that effectively absorbs high-pitch tones while delivering a deep, powerful exhaust note. This straight-through design helps unleash an additional +13 horsepower and +15 lbs. x ft. of torque.

Installation is straightforward using all factory mounting locations, requiring no modifications to the chassis. The system features OE-style bayonet hangers to ensure the exhaust remains stable under high-heat and high-vibration conditions, and it is secured with heavy-duty band clamps for a leak-free 360-degree seal. Finishing the look is a single, double-wall slash-cut 304 stainless steel tip with a gloss black powder-coated finish and a laser-etched aFe Power logo.

• Manufacturer Part Number: 49-36114-B
• Material: 304 Stainless Steel
• Tubing Diameter: 3-inch mandrel-bent
• Muffler: 22-inch straight-through stainless steel
• Tip: Single black 304 stainless steel slash-cut
• Gains: +15 lbs. x ft. TQ and +13 HP
• Configuration: Single side exit
• Installation: Bolt-on utilizing factory mounting points and bayonet hangers

Fits 2025-2026 Toyota Camry LE, SE, XLE, XSE, and Nightshade (L4-2.5L).

Improve your Camry's exhaust flow and sound profile with the aFe Takeda cat-back exhaust system. This system is engineered from 2-1/2 inch mandrel-bent 304 stainless steel tubing for maximum durability and corrosion resistance. The design features an acoustically tuned expansion chamber that delivers a deep, powerful exhaust tone while maintaining daily-driver refinement. For a seamless install, this kit utilizes factory-style flanges and hangers, making it a direct bolt-on solution that requires no cutting or permanent modifications to your chassis.

• Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing for increased flow
• Dual 3-1/2" diameter polished 304 stainless steel clamp-on tips with laser-etched Takeda logos
• Acoustically tuned expansion chamber provides a deep, refined exhaust note
• 100% MIG-welded for race-proven strength and longevity
• Direct bolt-on fitment using factory mounting points and flanges
• CAD-designed for precise vehicle-specific clearance and alignment
• Manufacturer Part Number: 49-36087-P

Fits 2025-2026 Toyota Camry (L4-2.5L) LE, Nightshade, SE, XLE, and XSE models.

The aFe Takeda cat-back exhaust system is engineered for the 2025-2026 Toyota Camry to provide a deep, powerful exhaust note without sacrificing durability. Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, this system ensures maximum flow and corrosion resistance. An integrated, acoustically tuned expansion chamber helps refine the sound profile, while 100% MIG-welded construction provides race-proven strength for daily driving or spirited use.

Installation is a straightforward, hassle-free process. This system is CAD-designed for precise vehicle fitment and utilizes factory-style flanges and hangers, making it a direct bolt-on upgrade that requires no cutting or permanent modifications to your Camry. The system is finished with dual 3-1/2 inch clamp-on black 304 stainless steel tips featuring laser-etched Takeda logos for a custom aesthetic.

• Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing
• Dual 3-1/2" diameter black 304 stainless steel clamp-on tips
• Acoustically tuned expansion chamber for a deep, refined tone
• 100% MIG-welded for maximum durability and strength
• Direct bolt-on fitment using factory-style flanges and hangers
• Computer-aided design (CAD) ensures precise fitment
• Manufacturer Part Number: 49-36087-B

Fits 2024-2026 Lexus GX550 (V6).

Improve your off-road capability and exhaust tone with the aFe Power Vulcan Series axle-back exhaust system. Engineered for the 2024-2026 Lexus GX550, this system features a hi-tuck tip design that provides critical clearance during extreme angle climbs and descents, protecting your exhaust components over rough terrain. By replacing the factory rear resonator, this system delivers a deeper sound while maximizing ground clearance.

Construction features 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing for superior strength and corrosion resistance. The system is 100% MIG-welded for durability and utilizes factory-style flanges and hangers for a precise, direct bolt-on installation that requires no cutting or permanent modifications to your vehicle.

• Material: Mandrel-bent 304 stainless steel
• Tubing Diameter: 2.5 in. - 3 in.
• Tip Design: Hi-Tuck for improved ground clearance
• Installation: Direct bolt-on; no cutting or welding required
• Welding: 100% MIG-welded for race-proven strength
• Manufacturer Part Number: 49-36086

Fits 2024-2026 Lexus GX550 (Luxury, Luxury+, Overtrail, Overtrail+, Premium, Premium+).

The aFe POWER Vulcan Series cat-back exhaust system for the 2024-2026 Lexus GX550 is engineered for durability and off-road performance. This system is constructed from 2-1/2-inch to 3-inch mandrel-bent 304 stainless steel tubing, providing maximum strength and corrosion resistance. It features a high-flow 304 stainless steel muffler that delivers a deep, powerful exhaust note while optimizing flow across the power band.

Designed specifically for the GX enthusiast, the "Hi-Tuck" tip is developed to provide extra ground clearance during extreme angle climbs or descents, protecting your exhaust components over rough terrain. This direct bolt-on system utilizes factory-style flanges and hangers, requiring no cutting or permanent modifications for a straightforward installation. Each system is 100% MIG-welded for race-proven strength and longevity.

• Constructed from 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing
• Hi-Tuck design increases ground clearance for improved off-road departure angles
• High-flow 304 stainless steel muffler provides a powerful, aggressive sound
• Utilizes factory-style flanges and hangers for a secure, direct bolt-on fitment
• 100% MIG-welded for maximum durability and strength
• Manufacturer Part Number: 49-36085

Fits 2014-2019 Toyota Corolla (1.8L). This Takeda axle-back exhaust system provides a refined, mild sound profile while improving exhaust flow for your Toyota Corolla. Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing, this system is designed for maximum durability and corrosion resistance, ensuring it stands up to the elements better than factory-grade steel.

Installation is a straightforward process thanks to the factory-style flange and hangers, making this a direct bolt-on system that requires no cutting or permanent modifications to your chassis. The high-flow 304 stainless steel polished muffler is 100% MIG-welded for race-proven strength. The system is finished with a 4-inch diameter black 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo for a distinct look.

• Manufacturer Part Number: 49-36083-B
• Material: Mandrel-bent 2.5-inch 304 stainless steel tubing
• Muffler: High-flow polished 304 stainless steel
• Tip: 4-inch black 304 stainless steel clamp-on with laser-etched logo
• Installation: Direct bolt-on using factory mounting points; no cutting required
• Construction: 100% MIG-welded for maximum durability

Fits 2025-2026 Toyota 4Runner models including SR5, TRD Off-Road, TRD Pro, Trailhunter, Limited, and Platinum.

Enhance the exhaust flow and ground clearance of your rig with the aFe POWER cat-back exhaust system. This system is engineered from 2.5-inch to 3-inch mandrel-bent 304 stainless steel tubing, providing superior corrosion resistance and maximum durability for off-road use. It features a high-flow 304 stainless steel muffler and an acoustically tuned expansion chamber designed to produce a deep, powerful tone without sacrificing interior comfort.

The hi-tuck tip design is specifically developed for off-road enthusiasts, providing extra clearance for extreme approach and departure angles to protect your exhaust during technical climbs. Installation is a straightforward bolt-on process, utilizing factory-style flanges and hangers for a secure fit with no cutting or modifications required. This system is finished with a 4-inch polished 304 stainless steel tip featuring a laser-etched aFe POWER logo.

• Constructed from 2.5" to 3" mandrel-bent 304 stainless steel tubing
• Acoustically tuned expansion chamber for a deep, resonant exhaust note
• Hi-tuck tip design increases clearance for off-road obstacles
• 100% MIG-welded for race-proven strength
• Direct bolt-on installation with factory-style hardware
• Includes 4" polished 304 stainless steel exhaust tip
• Manufacturer Part Number: 49-36080-P

Fits 2025-2026 Toyota 4Runner (SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro, Trailhunter, and Platinum models).

Enhance your 4Runner's performance and exhaust note with the aFe POWER Cat-Back Exhaust System. This system is constructed from 2-1/2" to 3" mandrel-bent 304 stainless steel tubing for maximum flow and corrosion resistance. The high-flow 304 stainless steel muffler features an acoustically tuned expansion chamber, engineered to deliver a deep, resonant tone while optimizing exhaust velocity. For off-road enthusiasts, the Hi-Tuck tip design is specifically developed to provide additional clearance for steep departure angles and technical terrain.

This exhaust is a direct bolt-on upgrade, utilizing factory-style flanges and hangers for a secure fit without requiring any cutting or permanent modifications to the vehicle. The assembly is 100% MIG-welded for race-proven strength and durability. Finishing the system is a 4" diameter 304 stainless steel black tip featuring a laser-etched aFe POWER logo.

• Tubing: Mandrel-bent 304 stainless steel (2.5" to 3" diameter)
• Muffler: High-flow 304 stainless steel with expansion chamber
• Tip: 4" black-finished 304 stainless steel with laser-etched logo
• Installation: Direct bolt-on using factory flange and hanger locations
• Construction: 100% MIG-welded for maximum durability
• Special Feature: Hi-Tuck design for improved off-road clearance
• Manufacturer Part Number: 49-36080-B

Fits 2024-2026 Toyota Land Cruiser (1958, Base, and First Edition).

Enhance the performance and sound of your vehicle with the aFe POWER cat-back exhaust system. Engineered for durability, this system is constructed from 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing. It features a high-flow 304 stainless steel muffler paired with an acoustically tuned expansion chamber, specifically designed to produce a deep, resonant exhaust tone while maintaining internal comfort.

This system is a direct bolt-on upgrade, utilizing factory-style flanges and hangers to ensure a precise fit without the need for cutting or modifications. Each unit is 100% MIG-welded for race-proven strength. To finish the look, a 4-inch diameter black 304 stainless steel tip is included, featuring a laser-etched aFe POWER logo for a custom appearance.

• Manufacturer Part Number: 49-36076-B
• Tubing Diameter: 2-1/2" to 3" mandrel-bent 304 stainless steel
• Tip Specification: 4" black 304 stainless steel with laser-etched logo
• Construction: 100% MIG-welded for maximum durability
• Installation: Direct bolt-on using factory mounting points and flanges
• Includes: High-flow muffler and acoustically tuned expansion chamber

Fits 2022-2026 Toyota Tundra (V6-3.4L / V6-3.5L) including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone models.

The aFe Vulcan Series cat-back exhaust system is designed to provide maximum exhaust flow and a custom look for your Tundra. This system is constructed from high-quality 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing for exceptional corrosion resistance and durability. The 100% MIG-welded construction ensures long-term structural integrity, while the rear side-exit design is finished with dual 4-inch black 304 stainless steel tips for a stealthy, aggressive appearance.

• Constructed from 2.5-inch to 3-inch mandrel-bent 304 stainless steel tubing
• Dual 4-inch 304 stainless steel black exhaust tips
• Rear side-exit configuration
• Utilizes factory-style flanges and hangers for a secure, bolt-on fit
• 100% MIG-welded for superior strength and durability
• Direct-fit installation requires no vehicle modifications
• Manufacturer Part Number: 49-36061-B

Fits 2001-2005 Lexus IS300 Base and Sportcross models (L6-3.0L).

Improve the exhaust flow and sound profile of your Lexus IS300 with the aFe Takeda cat-back exhaust system. This system is engineered from 2-1/2 inch mandrel-bent 304 stainless steel tubing to provide maximum exhaust velocity and long-term durability. At the heart of the system is a high-flow 304 stainless steel muffler that delivers a deep, resonant tone while maintaining corrosion resistance. The system is finished with a 4-1/2 inch diameter polished 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo.

Designed for a hassle-free installation, this exhaust utilizes factory-style flanges and hangers to ensure a secure, direct bolt-on fit without the need for cutting or custom modifications. Every joint is 100% MIG-welded for race-proven strength, ensuring the system handles the rigors of daily driving and performance use.

• Manufacturer Part Number: 49-36058-P
• Construction: 2-1/2 inch mandrel-bent 304 stainless steel tubing
• Muffler: High-flow polished 304 stainless steel
• Tip: 4-1/2 inch polished 304 stainless steel clamp-on tip
• Installation: Direct bolt-on using factory mounting points
• Weld Quality: 100% MIG-welded for maximum durability

Fits 2019-2024 Toyota RAV4 (L4-2.5L).

The aFe POWER Takeda cat-back exhaust system delivers dyno-proven gains of up to +6 HP and +7 lbs. x Ft. TQ for the Toyota RAV4. Engineered for durability and performance, this system is constructed from 2-1/4 inch to 2-1/2 inch mandrel-bent 304 stainless steel tubing to maximize exhaust flow and resist corrosion. The high-flow 304 stainless steel muffler provides a mild, refined exhaust note that highlights the L4-2.5L engine without excessive cabin drone.

Installation is a straightforward bolt-on process using factory-style flanges and hangers, requiring no cutting or permanent vehicle modifications for a hassle-free fitment. Every Takeda exhaust is 100% MIG-welded for race-proven strength and utilizes state-of-the-art computer-aided design for high-tolerance factory alignment.

• Direct bolt-on fitment with no cutting or modifications required
• Construction: 2-1/4" - 2-1/2" mandrel-bent 304 stainless steel tubing
• Tips: Dual 4" diameter black 304 stainless steel clamp-on tips with etched Takeda logo
• Muffler: High-flow 304 stainless steel construction
• Performance: Dyno-tested gains of up to +6 HP and +7 lbs. x Ft. TQ
• Manufacturing: 100% MIG-welded for maximum durability
• Manufacturer Part Number: 49-36053-B

Fits 2012-2016 Subaru Impreza Base, Limited, Premium, and Sport models (2.0L).

Improve your vehicle's exhaust flow and sound profile with the aFe POWER Takeda cat-back exhaust system. This system is engineered from 2.25-inch mandrel-bent 304 stainless steel tubing to ensure maximum durability and consistent flow. A high-flow, polished 304 stainless steel muffler provides a deep, aggressive exhaust note while resisting corrosion in harsh conditions.

The system is finished with a 4-inch diameter polished 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo. As a direct bolt-on upgrade, it utilizes factory-style flanges and hangers for a precise fitment that requires no cutting or custom modifications during installation.

• Tubing: 2.25-inch mandrel-bent 304 stainless steel
• Muffler: High-flow polished 304 stainless steel
• Tip: 4-inch diameter polished clamp-on with Takeda logo
• Construction: 100% MIG-welded for race-proven durability
• Installation: Direct bolt-on with factory-style flange and hangers
• Manufacturer Part Number: 49-36052-P

Fits 2012-2016 Subaru Impreza (2.0L).

The aFe POWER Takeda cat-back exhaust system is engineered to enhance the exhaust flow and acoustic profile of your 2012-2016 Subaru Impreza. Constructed from 2.25-inch mandrel-bent 304 stainless steel tubing for maximum durability, this system features a high-flow polished 304 stainless steel muffler that produces a deep, resonant tone. The system is completed with a 4-inch diameter black 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo.

Designed for a direct bolt-on installation, this system utilizes factory-style flanges and hangers, requiring no cutting or modifications. Each Takeda exhaust is 100% MIG-welded for race-proven strength and utilizes state-of-the-art computer-aided design technology to ensure a precise, high-tolerance fitment.

• Manufacturer Part Number: 49-36052-B
• Tubing Diameter: 2.25-inch (2-1/4 IN) Mandrel-Bent
• Material: 304 Stainless Steel
• Tip Description: 4-inch Black 304 Stainless Steel Clamp-On
• Muffler: High-flow polished 304 Stainless Steel
• Installation: Direct bolt-on using factory hangers and flanges
• Construction: 100% MIG-welded

Fits 2021-2024 Toyota GR Supra Base models (2.0L). This aFe POWER Takeda cat-back exhaust system is engineered to optimize exhaust flow and sound on the 2.0L turbocharged Supra. Constructed from 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing with a brushed finish, this system is 100% TIG-welded for maximum durability and a precision fit.

This system features an integrated factory-style exhaust valve that utilizes the OE valve motor (not included), maintaining the vehicle's bi-modal functionality. In normal mode, gases are routed through a high-flow polished 304 stainless steel muffler for a deep, sporty tone; in Sport mode, the valve opens to bypass the muffler for a more aggressive, crackling note. A mitered merge collector is utilized to reduce turbulence and increase velocity, while the dual 4-1/2 inch polished stainless steel tips with laser-etched Takeda logos provide a refined aesthetic.

• Direct bolt-on installation using factory-style flange and hangers
• High-flow polished 304 stainless steel muffler
• Dyno-measured gains of up to +10 HP and +17 lbs. x Ft. TQ
• Dual 4-1/2" diameter polished 304 stainless steel exhaust tips
• Maintains factory exhaust valve functionality (requires factory motor)
• Manufacturer Part Number: 49-36050-P

Fits 2021-2024 Toyota GR Supra Base (2.0L). This aFe POWER Takeda cat-back exhaust system is engineered to optimize flow and sound for the turbocharged Supra, delivering dyno-proven gains of up to +10 HP and +17 lbs. x Ft. torque. Constructed from 2.5-inch to 3-inch mandrel-bent, brushed-finish 304 stainless steel tubing, this system is built for maximum durability and corrosion resistance.

The system features a high-flow 304 stainless steel polished muffler and a mitered merge collector to reduce turbulence and increase exhaust velocity. A built-in factory-style exhaust valve provides a true bi-modal experience: maintain a deep, sporty tone in normal mode or open the valve in sport mode for an aggressive, crackling sound. This system utilizes your factory valve motor (not included) and installs as a direct bolt-on using factory-style flanges and hangers with no cutting required.

• Direct bolt-on fitment for 2021-2024 Toyota GR Supra (2.0L)
• Constructed from 2.5" - 3" mandrel-bent 304 stainless steel tubing
• Dual 4.5" blue flame 304 stainless steel exhaust tips with laser-etched Takeda logo
• 100% TIG-welded for race-proven strength and durability
• Integrated exhaust valve reuses the factory valve motor
• Mitered merge collector improves throttle response and exhaust velocity
• Manufacturer Part Number: 49-36050-L

Fits 2021-2024 Toyota GR Supra (2.0L).

Unlock performance and sound for your Toyota GR Supra with the aFe POWER Takeda cat-back exhaust system. This direct bolt-on system is constructed from 2-1/2" to 3" mandrel-bent 304 stainless steel tubing with a brushed finish. Designed for maximum flow and durability, it features a mitered merge collector to reduce turbulence and increase exhaust velocity, resulting in dyno-proven gains of up to +10 HP and +17 lb-ft of torque.

The system includes a high-flow, polished 304 stainless steel muffler and a factory-style exhaust valve for a true bi-modal experience. In Normal mode, gases pass through the muffler for a deep, sporty tone. Engaging Sport mode opens the valve to bypass the muffler for an aggressive, crackling sound. This system utilizes the factory valve motor and mounts to OE hangers and flanges for a hassle-free installation without cutting or modifications.

• 304 stainless steel construction with 100% TIG-welding for race-proven durability
• Mandrel-bent 2-1/2" to 3" tubing for optimized flow
• Dual 4-1/2" carbon fiber tips with 304 SS internals and aFe POWER logos
• Integrated factory-style exhaust valve (retains factory motor, motor not included)
• Direct bolt-on fitment using factory-style flange and hangers
• Mitered merge collector improves throttle response
• Manufacturer Part Number: 49-36050-C

Fits 2021-2024 Toyota GR Supra Base (2.0L).

This aFe POWER Takeda cat-back exhaust system is engineered to provide a true bi-modal exhaust experience for your GR Supra. In normal mode, gases are directed through the high-flow 304 stainless steel polished muffler for a deep, sporty tone. In Sport mode, the integrated factory-style valve bypasses the muffler to unleash an aggressive, crackling exhaust sound. The system is constructed from 2.5-inch to 3-inch mandrel-bent, brushed finish 304 stainless steel tubing for maximum flow and durability.

• Dyno-tested gains of up to +10 HP and +17 lbs. x ft. torque
• 100% TIG-welded for race-proven strength and longevity
• Dual 4.5-inch black 304 stainless steel exhaust tips with laser-etched Takeda logos
• Mitered merge collector reduces turbulence and increases exhaust velocity
• Direct bolt-on installation using factory-style flange and hangers
• Utilizes factory exhaust valve motor (not included)
• Manufacturer Part Number: 49-36050-B

Fits 2010-2023 Lexus GX460 models (V8-4.6L).

The aFe POWER Vulcan Series cat-back exhaust system delivers an aggressive exhaust note and improved flow for your Lexus GX460. Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, this system is engineered for maximum durability and corrosion resistance. At the heart of the system is a high-flow 304 stainless steel muffler that provides a deep, performance-oriented sound profile. The system is finished with a 4-1/2 inch diameter black-coated 304 stainless steel clamp-on tip, featuring a laser-etched aFe POWER logo for a custom look.

Designed for a precision fit, this exhaust utilizes state-of-the-art computer-aided design (CAD) technology to match factory tolerances. It is 100% MIG-welded for race-proven strength and uses factory-style flanges and hangers for a secure, direct bolt-on installation that requires no cutting or modifications to your vehicle.

• 2-1/2 inch mandrel-bent 304 stainless steel tubing for maximum flow
• 4-1/2 inch black 304 stainless steel clamp-on exhaust tip
• High-flow 304 stainless steel muffler for an aggressive sound
• 100% MIG-welded for long-term durability
• Direct bolt-on installation using factory mounting points
• Includes all necessary hardware for a complete install
• Manufacturer Part Number: 49-36048-B

Fits 2010-2024 Toyota 4Runner (V6-4.0L).

The aFe POWER MACH Force-XP series cat-back exhaust system is engineered to optimize exhaust flow and sound for the Toyota 4Runner. Constructing from 2-1/2 inch and 3 inch mandrel-bent 304 stainless steel tubing, this 4-piece system reduces restriction compared to the factory exhaust, allowing for improved torque and horsepower delivery. This system is specifically designed to be compatible with the Kinetic Dynamic Suspension System (KDSS) and features a high-flow 22-inch stainless steel muffler that produces a deep, smooth tone without being overly aggressive.

Built for durability in harsh off-road environments, each joint is 100% hand MIG-welded by certified craftsmen. The system is finished with a 4" x 12" resonated black stainless steel clamp-on tip, providing a refined aesthetic. Installation is straightforward using high-quality hardware and clamps that utilize factory mounting locations.

• Fits 2010-2024 Toyota 4Runner (V6-4.0L)
• 2-1/2 inch and 3 inch mandrel-bent 304 stainless steel tubing for maximum flow
• 22 inch high-flow stainless steel muffler improves performance and sound
• 4 inch x 12 inch resonated black stainless steel clamp-on tip
• 100% hand MIG-welded for superior structural integrity
• Fully compatible with Kinetic Dynamic Suspension System (KDSS)
• Includes all necessary high-quality hardware and clamps
• Manufacturer Part Number: 49-36040-1B

Fits 2011-2016 Scion tC Base models (L4-2.5L).

Improve the exhaust flow and acoustic profile of your vehicle with the aFe Takeda Axle-Back Exhaust System. Designed and manufactured in Corona, California, this system replaces the restrictive rear factory exhaust components with high-quality 304 stainless steel mandrel-bent tubing. The dual free-flowing mufflers are specifically tuned to absorb high-pitched tones, resulting in a powerful, resonant sound while optimizing horsepower and torque output.

This system is built for a precise fit, utilizing factory mounting locations to ensure stability and a hassle-free installation process. To guarantee a professional finish and a leak-free seal, aFe includes a high-quality OE-style flange and band clamps for 360-degree surface contact.

• Materials: Mandrel-bent 304 stainless steel for superior corrosion resistance and exhaust velocity.
• Installation: Direct bolt-on fitment using factory mounting points; no cutting or welding required.
• Muffler Design: Dual free-flowing mufflers for a deep, aggressive tone.
• Leak-Free Seal: Includes OE-style flange and heavy-duty band clamps.
• Exit Style: Finished with a polished 304 stainless steel tip for a refined appearance.

• Manufacturer Part Number: 49-36025-P
• Tubing Diameter: 2-1/4in to 2-1/2in transition
• Material: 304 Stainless Steel
• Tip Finish: Polished

Fits 2011-2016 Scion tC Base models (2.5L).

The aFe Takeda Axle-Back Exhaust System is engineered to deliver a balance of performance and refined sound for the Scion tC. Designed and manufactured in Corona, California, this system features 2-1/4" to 2-1/2" mandrel-bent tubing to optimize exhaust flow. The dual free-flowing mufflers are specifically tuned to eliminate high-pitched tones, resulting in a deeper, more aggressive exhaust note while maximizing horsepower and torque potential.

Constructed for longevity and ease of installation, this system utilizes factory mounting locations for a stable fit without the need for custom fabrication. The assembly includes high-quality OE-style flanges and band clamps to ensure a leak-free, 360-degree seal. The system is finished with a sleek black tip for a modern, performance-oriented aesthetic.

• Direct-fit installation using factory mounting points
• Polished 304 stainless steel free-flowing muffler
• Mandrel-bent stainless steel tubing (2-1/4" to 2-1/2")
• Includes high-quality OE-style flange and band clamps for a secure seal
• Dual muffler design for optimized sound attenuation
• Manufacturer Part Number: 49-36025-B

Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models equipped with the V8-6.2L engine.

The aFe Power Gemini XV cat-back exhaust system provides versatile sound control and improved exhaust flow for your GM truck. This system is engineered from 4" to dual 3" mandrel-bent 304 stainless steel tubing, providing superior corrosion resistance and reduced turbulence compared to stock systems. The highlight of this kit is an integrated, electronically controlled cutout valve positioned before the high-flow stainless steel muffler, allowing you to toggle between a mild street tone and a raw, aggressive exhaust note with the push of a button.

Built for the trail and the street, this system features a hi-tuck tip design. This high-clearance configuration protects the exhaust during extreme angle climbs or descents, making it ideal for off-road use. Construction includes a heavy-duty flex pipe with an internal interlock liner for added durability and a 100% MIG-welded finish for race-proven strength. The system utilizes factory-style hangers and requires no cutting or modification to the vehicle's electronics for installation.

• Manufacturer Part Number: 49-34140
• Tubing Size: 4" to dual 3" mandrel-bent 304 stainless steel
• Valve Type: Electronically controlled cutout with wireless remote and control module
• Muffler: High-flow stainless steel
• Exit Style: Hi-tuck design for maximum ground clearance
• Installation: 100% MIG-welded with factory-style hangers; no cutting required
• Included: Valve motor, wiring harness, control module, key fob remotes, and hardware

Fits 2024-2026 Ford Ranger Raptor.

The aFe POWER Vulcan Series cat-back exhaust system is engineered for those looking to improve both the performance and acoustics of their Ford Ranger Raptor. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system provides maximum exhaust flow and corrosion resistance. It features 100% MIG-welded joints for race-proven durability on and off the trail. To maintain the vehicle’s versatility, this system incorporates factory-style exhaust valves that utilize your existing factory valve motors, allowing you to regulate exhaust flow and sound levels based on throttle position and driving mode.

This direct bolt-on system is designed using state-of-the-art CAD technology for a precise fit, utilizing factory-style flanges and hangers for a secure installation without the need for cutting or modifications. The system is finished with dual 12-inch diameter polished 304 stainless steel clamp-on tips featuring laser-etched aFe POWER logos.

• 3-inch mandrel-bent 304 stainless steel tubing for maximum strength
• Dual 12-inch diameter polished 304 stainless steel clamp-on tips
• Incorporates factory-style exhaust valves (uses factory motors, not included)
• 100% MIG-welded for superior structural integrity
• Direct bolt-on installation using factory-style flange and hangers
• Manufacturer Part Number: 49-33152-P

Fits 2024-2026 Ford Ranger Raptor (V6-3.0L).

The aFe Vulcan Series cat-back exhaust system is engineered to optimize exhaust flow and durability for the 2024-2026 Ford Ranger Raptor. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing, providing superior corrosion resistance and high-strength performance. To maintain factory functionality, the system incorporates factory-style exhaust valves that utilize the original valve motors (not included), allowing you to control exhaust gas flow and sound based on throttle position.

This exhaust is 100% MIG-welded for race-proven longevity and uses a factory-style flange and hangers for a precise, direct bolt-on fit without the need for cutting or permanent modifications. It is finished with dual 12-inch black 304 stainless steel clamp-on tips featuring a laser-etched aFe POWER logo for a refined, aggressive look.

• 3-inch mandrel-bent 304 stainless steel tubing for maximum durability
• Dual 12-inch black 304 stainless steel clamp-on exhaust tips
• Integrated factory-style exhaust valves (uses OE motors, not included)
• 100% MIG-welded for superior strength
• Direct bolt-on installation using factory hangers and flange
• Manufacturer Part Number: 49-33152-B

Fits 2021-2025 Ford F-150 Raptor models. This aFe Vulcan Series cat-back exhaust system is engineered to provide maximum flow and a aggressive exhaust note without sacrificing durability. Constructed from 3-inch to 3-1/2-inch mandrel-bent 304 stainless steel tubing, this system is 100% MIG-welded for race-proven strength. A mitered merge x-pipe balances exhaust pulses to minimize drone, while an acoustically tuned expansion chamber further refines the tone.

This direct bolt-on system (MPN 49-33151-B) utilizes factory-style hangers and flanges for a secure fitment that requires no cutting or modification. It is designed to incorporate your vehicle's factory exhaust valves, utilizing the OE valve motors (not included) to maintain throttle-dependent sound control. The system is finished with dual 4-1/2 inch black 304 stainless steel clamp-on tips featuring riveted aFe POWER logo plates.

• Fits 2021-2025 Ford F-150 Raptor
• 3" to 3-1/2" mandrel-bent 304 stainless steel construction
• Dual 4-1/2" diameter black stainless steel clamp-on tips
• Mitered merge x-pipe for pulse balancing and scavenging
• Acoustically tuned expansion chamber for deep tone control
• Retains factory exhaust valve functionality
• 100% MIG-welded for maximum durability
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 49-33151-B

Fits 2022-2026 Ford Maverick Lariat, Lobo, XL, and XLT (L4-2.0L).

The aFe Rebel Series cat-back exhaust system is engineered to improve the sound and flow of your EcoBoost Maverick. Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, this system provides maximum durability and corrosion resistance. A high-flow 304 stainless steel muffler is included to deliver a deep, resonance-rich exhaust note while maintaining performance integrity.

The system is finished with a 3-1/2 inch diameter polished 304 stainless steel tip featuring a laser-etched aFe POWER logo. For structural reliability, every joint is 100% MIG-welded. While this system utilizes factory-style hangers to mount to existing locations, please note that some cutting of the factory exhaust may be required for installation.

• Manufacturer Part Number: 49-33144-P
• Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing
• High-flow 304 stainless steel muffler produces a deep, aggressive tone
• 3-1/2 inch diameter polished 304 stainless steel tip with laser-etched logo
• 100% MIG-welded for race-proven strength and durability
• Utilizes factory-style hangers for a secure, stable fit
• Designed using state-of-the-art CAD technology for precise fitment

Fits 2022-2026 Ford Maverick (Lariat, Lobo, XL, XLT).

The aFe POWER Rebel Series cat-back exhaust system is engineered for Ford Maverick owners seeking a deeper exhaust note and maximum durability. This system is constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, providing superior corrosion resistance and optimal flow. It features a high-flow 304 stainless steel muffler that delivers a resonant, aggressive sound while unleashing potential horsepower and torque.

The system is finished with a 3-1/2 inch diameter black 304 stainless steel exhaust tip, featuring a laser-etched aFe POWER logo for a custom look. For installation, this system utilizes factory-style hangers to mount directly to OE locations. Please note that some cutting of the factory exhaust may be required during the installation process.

• Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing
• 3-1/2 inch diameter black 304 stainless steel exhaust tip
• High-flow 304 stainless steel muffler for a deep, powerful sound
• 100% MIG-welded for race-proven strength and longevity
• Utilizes factory-style hangers for a secure fit
• Manufacturer Part Number: 49-33144-B