Fits 2015-2023 Ford Edge Sport and ST models equipped with the V6-2.7L engine.

Upgrade your vehicle's flow and sound with the aFe Vulcan Series cat-back exhaust system. Engineered for precision and longevity, this system is constructed from 2.5-inch mandrel-bent 304 stainless steel tubing to ensure maximum exhaust velocity and resistance to corrosion. At its core, a high-flow stainless steel muffler delivers a mild, refined exhaust note while enhancing overall horsepower and torque output. The muffler features a sleek black finish for added protection and a stealthy aesthetic.

This exhaust is designed using state-of-the-art computer-aided technology for a high-tolerance factory fit. It utilizes 100% MIG-welded construction for race-proven durability and mounts directly to factory-style hangers. This direct bolt-on design requires no cutting or permanent modifications, making for a straightforward installation in your garage or shop.

• Tubing Diameter: 2.5-inch mandrel-bent for maximum flow
• Material: 304 stainless steel for superior corrosion resistance
• Muffler: High-flow stainless steel with black finish
• Sound Profile: Mild exhaust tone
• Installation: Direct bolt-on using factory hangers; no cutting required
• Construction: 100% MIG-welded for strength
• Manufacturer Part Number: 49-33133

Fits 2025-2026 Ram 1500 RHO.

The aFe Vulcan Series cat-back exhaust system is engineered to provide an aggressive sound profile while optimizing exhaust flow for the 2025-2026 Ram 1500 RHO. Constructed from 3-inch to 3-1/2-inch mandrel-bent 304 stainless steel tubing, this system features a mitered merge x-pipe that balances exhaust pulses to maximize scavenging and minimize drone. The design retains the factory crossover balance tube to ensure consistent pressure distribution and tonal quality.

Each system is 100% MIG-welded for maximum durability and utilizes factory-style hangers for a secure, direct bolt-on installation that requires no cutting or permanent modifications. The exhaust is finished with dual 6-inch diameter black 304 stainless steel tips featuring laser-etched aFe POWER logos.

• Fits 2025-2026 Ram 1500 RHO
• Constructed from 3" - 3.5" mandrel-bent 304 stainless steel tubing
• Dual 6" diameter black 304 stainless steel exhaust tips
• Mitered merge x-pipe for improved scavenging and reduced drone
• 100% MIG-welded for race-proven strength
• Utilizes factory-style hangers for a hassle-free bolt-on installation
• Manufacturer Part Number: 49-32087-B

Fits 2021-2024 Ram 1500 TRX and 2021 TRX Launch Edition (V8-6.2L).

The aFe POWER Vulcan Series cat-back exhaust is engineered to optimize the RAM TRX's exhaust flow without the restriction of traditional mufflers. This system features a unique combination of a mitered merge X-pipe and a crossover balance tube. This hybrid design balances exhaust pulses to maximize scavenging and improve the engine's tone while effectively reducing drone at cruising speeds. The result is an aggressive, deep exterior sound that maintains cabin comfort during daily driving.

Built for durability in high-performance environments, the system is constructed from 3-inch mandrel-bent 304 stainless steel tubing that transitions into 3-1/2-inch tailpipes for a high-flow "Large Bore" profile. The assembly is 100% MIG-welded for long-term structural integrity and finished with massive dual 6-inch matte black 304 stainless steel tips featuring laser-etched aFe POWER logos. This is a direct bolt-on system that utilizes factory-style flanges and hangers for a secure, modification-free installation.

• Fits 2021-2024 Ram 1500 TRX (V8-6.2L)
• Muffler-delete design for aggressive sound and maximum flow
• 3" to 3.5" mandrel-bent 304 stainless steel tubing
• Dual 6" matte black 304 stainless steel tips with laser-etched logos
• Incorporated X-pipe and crossover balance tube for drone reduction
• 100% MIG-welded for superior strength
• Direct bolt-on fitment using factory mounting points
• Manufacturer Part Number: 49-32084-B

Fits 2019-2024 Ram 1500 models equipped with the V8-5.7L Hemi engine (see fitment table for specific trim compatibility).

The aFe Gemini XV series offers a high-performance exhaust solution that bridges the gap between daily drivability and aggressive track-side volume. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this cat-back system is designed for maximum flow and long-term durability. The standout feature is the electronically controlled exhaust cutout valve, allowing you to bypass the muffler and switch between a mild tone and a raw, aggressive exhaust note at the push of a button.

This system is 100% MIG-welded and utilizes factory-style hangers and flanges for a secure, direct bolt-on installation that requires no cutting or permanent vehicle modifications. In dyno testing, this system produced gains of up to +22 HP and +26 lbs. x ft. of torque. Finishing the system are dual 5-inch diameter polished 304 stainless steel clamp-on tips featuring a riveted aFe POWER logo plate.

• 3" mandrel-bent 304 stainless steel tubing for superior flow
• Electronically controlled valve with two included key fob remotes
• Dual 5" diameter polished 304 stainless steel clamp-on tips
• Direct bolt-on fitment using factory-style hangers and flanges
• 100% MIG-welded for race-proven strength
• Includes control module, valve motor, and all necessary wiring
• Manufacturer Part Number: 49-32081-P

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims (3.8L).

Designed for the trail-focused enthusiast, the aFe Power Scorpion Hi-Tuck "Rock Basher" (RB) system provides the ground clearance and durability needed for serious off-roading. Constructed from 2-1/2 inch mandrel-bent aluminized steel tubing, this exhaust system minimizes restriction and improves exhaust flow for better throttle response and overall performance.

The system features an 18-inch length chambered muffler that delivers a deep, powerful tone while maintaining cabin comfort. The "Hi-Tuck" design ensures the exhaust tip is tucked high for maximum departure angles, protecting your investment from rock damage. Installation is straightforward, utilizing factory mounting points and the included high-quality hardware.

• Material: 2-1/2" mandrel-bent aluminized steel for smooth flow
• Design: Hi-Tuck "Rock Basher" configuration for maximum ground clearance
• Muffler: 18" length chambered performance muffler
• Hangers: OE-style bayonet hangers for a secure, factory-like fit
• Tip: Polished exhaust tip for a clean, finished look
• Installation: Includes band clamps and all necessary hardware; MPN 49-08047-P

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims (3.8L).

The aFe Power Scorpion Hi-Tuck "Rock Basher" axle-back exhaust system is engineered for Jeep owners who prioritize off-road clearance and durability. Constructed from 2-1/2 inch mandrel-bent aluminized steel tubing, this system replaces the restrictive factory rear section with smooth curves that improve exhaust flow for better throttle response and performance. The "Hi-Tuck" design is specifically developed to provide maximum departure angle clearance, preventing the exhaust from catching on obstacles during steep climbs or rock crawling.

This system features an 18-inch length chambered muffler that delivers a deep, performance tone without the drone typical of lesser systems. Installation is straightforward using factory mounting points and the included heavy-duty hardware. The two-piece design utilizes OE-style bayonet hangers to maintain a secure fit even under extreme vibration and off-road articulation.

• Maintains high-clearance profile for off-road utility
• 2.5-inch mandrel-bent aluminized steel tubing
• 18-inch high-flow chambered muffler
• OE-style bayonet hangers and heavy-duty band clamps included
• Direct-fit installation using factory mounting points
• Manufacturer Part Number: 49-08046

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited (3.8L).

The aFe Power Scorpion Hi-Tuck "Rock Basher" (RB) Cat-Back Exhaust System is designed specifically for Jeep owners seeking maximum ground clearance during off-road maneuvers. Constructed from 2.5-inch mandrel-bent aluminized steel tubing, this system eliminates flow restrictions and improves exhaust velocity to enhance throttle response and power delivery.

The Hi-Tuck design relocates the tailpipe to prevent damage during steep departures on the trail. This two-piece system features an 18-inch length chambered performance muffler to provide a deep, aggressive tone while maintaining structural integrity. Installation is a straightforward bolt-on process using factory mounting locations with no cutting required.

• 2.5-inch mandrel-bent aluminized steel tubing for corrosion resistance and flow
• Hi-Tuck "Rock Basher" design provides superior ground clearance and departure angles
• 18-inch chambered performance muffler delivers a deep exhaust note
• Includes OE-style bayonet hangers and heavy-duty band clamps for a secure fit
• Two-piece design ensures a hassle-free installation
• Manufacturer Part Number: 49-08043

Fits 2007-2014 Toyota FJ Cruiser models (V6-4.0L).

The aFe Scorpion Series cat-back exhaust system is engineered to improve the performance and sound of your Toyota FJ Cruiser. Built from 2-1/2-inch mandrel-bent aluminized steel tubing, this system provides maximum flow and reduced turbulence to increase torque, horsepower, and throttle response. This 3-piece design replaces the restrictive factory components with a high-flow, baffled 18-inch muffler that absorbs high-pitch tones, producing a deep, aggressive tone under load.

Constructed for durability and a perfect fit, this exhaust is 100% hand MIG-welded by certified technicians. It features OE-style bayonet hangers to maintain pipe stability under all driving conditions and high-quality band clamps for a leak-free, 360-degree seal. The system is finished with a 4-1/2-inch polished stainless steel tip for a clean, professional appearance. Installation is straightforward with no cutting required as the system uses factory mounting points.

• 2-1/2" mandrel-bent aluminized steel tubing for maximum flow
• 18" high-flow baffled muffler with anti-corrosion coating
• 4-1/2" polished stainless steel exhaust tip
• 100% hand MIG-welded for superior strength
• OE-style bayonet hangers and high-quality band clamps included
• Direct-fit installation with no cutting required
• Manufacturer Part Number: 49-06039-P

Fits 2007-2014 Toyota FJ Cruiser (V6-4.0L).

Upgrade your vehicle's exhaust system with the aFe Power Scorpion Series cat-back exhaust, designed to improve exhaust flow and throttle response. This 3-piece system is constructed from 2-1/2 inch mandrel-bent aluminized steel to reduce turbulence and increase horsepower and torque over the factory setup. The system features an 18-inch baffled muffler that delivers a deep, smooth tone under load while minimizing high-pitch frequencies, protected by an anti-corrosion coating for longevity.

Built for durability and a precision fit, this exhaust is 100% hand MIG-welded by certified craftsmen. It utilizes OE-style bayonet hangers to maintain pipe stability across all driving conditions and high-quality band clamps for a 360-degree, leak-free seal. Installation is straightforward and requires no cutting, as it is designed to bolt directly to factory mounting locations. The system is finished with a 4-1/2 inch high-temperature black powder-coated stainless steel tip.

• Manufacturer Part Number: 49-06039-B
• Tubing Diameter: 2.5 inch mandrel-bent aluminized steel
• Muffler Type: 18 inch high-flow baffled muffler
• Tip Size: 4.5 inch diameter black powder-coated stainless steel
• Construction: Hand MIG-welded for maximum durability
• Installation: Bolt-on fitment using OE-style bayonet hangers

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500/3500 HD (V8-6.6L).

Improve the exhaust flow and durability of your heavy-duty GM diesel truck with the aFe Power Atlas DPF-back exhaust system. This 5-inch system is constructed from mandrel-bent aluminized steel tubing, designed specifically to reduce turbulence. By smoothing out exhaust transitions, this system helps lower Exhaust Gas Temperatures (EGTs) and supports better overall performance. The Atlas series is engineered as a direct bolt-on solution, utilizing factory mounting locations and OE-style bayonet hangers for a precise fit without the need for custom fabrication.

• 5-inch mandrel-bent aluminized steel tubing for maximum flow and durability
• Direct bolt-on installation utilizes all factory mounting points
• Heavy-duty OE-style welded bayonet hangers ensure stability
• Includes high-quality band clamps for a secure, 360-degree seal
• 50-state street legal DPF-back design
• All necessary hardware included for a hassle-free install
• Manufacturer Part Number: 49-04041
• 2-Year Limited Warranty

Fits select 2017-2026 Ford F-250 and F-350 Super Duty trucks (V8-6.7L / 6.7L).

Improve exhaust flow and durability on your 6.7L Power Stroke diesel with the aFe POWER ATLAS DPF-back exhaust system. This system is constructed from 5-inch mandrel-bent aluminized steel tubing for maximum flow and thermal efficiency. The assembly utilizes high-quality band clamps and OE-style bayonet hangers to maintain a secure fit using your truck's factory mounting locations, ensuring a straightforward, bolt-on installation without the need for custom fabrication.

The system is finished with a massive 7-inch wrinkle-black powder-coated 304 stainless steel tip. This tip features an integrated drain port on the bottom to prevent moisture accumulation and corrosion, along with a riveted laser-cut stainless steel aFe Power logo plate. Every ATLAS exhaust system is engineered and manufactured at the aFe facility in Corona, California.

• Manufacturer Part Number: 49-03090-B
• Tubing Diameter: 5-inch mandrel-bent aluminized steel
• Tip Specifications: 7-inch diameter, wrinkle-black 304 stainless steel with drain port
• Hardware Included: OE-style flanges and heavy-duty band clamps
• Installation: 100% bolt-on using factory mounting points
• Compatibility: Fits 2017-2026 F-250/F-350 Super Duty 6.7L diesel models

Fits 2015-2020 Ford F-150 (V6-3.5L).

The aFe Power Atlas Series cat-back exhaust system is engineered to maximize flow and performance on your Ford F-150. Built from 4-inch mandrel-bent aluminized steel tubing, this system replaces restrictive factory components with a high-volume design that reduces backpressure and improves exhaust velocity. The included free-flow muffler delivers an aggressive sound while maintaining durability for long-term use.

This system is designed for a hassle-free installation, utilizing factory mounting locations and OE-style bayonet hangers that ensure pipe stability even under high-heat and high-vibration conditions. High-quality flange and band clamps are included to provide a 360-degree sealing surface, eliminating potential leak paths. The system is finished with a polished tip for a refined look.

• 4-inch mandrel-bent aluminized steel tubing for maximum flow
• High-flow muffler delivers an aggressive exhaust note
• Includes OE-style bayonet hangers and heavy-duty band clamps
• Utilizes all factory mounting locations for a secure fit
• 50-state legal emissions status
• 2-year limited warranty
• Manufacturer Part Number: 49-03069-P

Fits 2015-2020 Ford F-150 (V6-3.5L).

The aFe Atlas Series Cat-Back Exhaust System is designed to maximize exhaust flow and improve performance on your 2015-2020 Ford F-150. Constructed from 4-inch mandrel-bent aluminized steel, this system features smooth curves and an increased diameter to eliminate restrictions, resulting in gains of up to 32 HP and 28 lbs.-ft. of torque. The free-flow muffler provides an aggressive sound while maintaining high-temperature durability.

This system is engineered for a hassle-free installation, utilizing all factory mounting locations for maximum stability. The included OE-style bayonet hangers ensure the exhaust remains in place even under high vibration and extreme heat. High-quality OE-style flanges and heavy-duty band clamps provide a secure, 360-degree sealing surface to prevent leak paths. The kit comes complete with all necessary hardware and a black-coated tip for a custom look.

• Manufacturer Part Number: 49-03069-B
• Material: Aluminized Steel
• Tubing Diameter: 4-inch mandrel-bent
• Tip Finish: Black
• Performance Gains: +32 HP / +28 lbs.-ft. Torque
• Installation: Bolt-on, uses factory mounting points
• Warranty: 2-Year Limited Warranty
• Emissions: 50-State Legal

Fits 2011-2014 Ford F-250 and F-350 Super Duty trucks equipped with the V8-6.7L Power Stroke diesel engine.

The aFe Atlas DPF-back exhaust system is engineered to improve the performance and sound of your Super Duty without compromising emissions compliance. Constructed from 5-inch mandrel-bent aluminized steel tubing, this system features smooth transition bends that reduce turbulence. This design increases exhaust flow, helps lower Exhaust Gas Temperatures (EGTs), and provides gains in horsepower and torque.

Built for durability and ease of installation, the system utilizes OE-style bayonet hangers that maintain their position even under high-vibration conditions. The heavy-duty band clamps provide a 360-degree sealing surface to prevent leaks. This is a direct bolt-on unit that uses all factory mounting locations for a quick, hassle-free installation that requires no cutting or drilling.

• 5-inch mandrel-bent aluminized steel tubing for maximum flow
• OE-style bayonet hangers and high-quality band clamps included
• Direct bolt-on installation using factory mounting points
• Aggressive exhaust note while remaining 50-state street legal
• Manufactured in Corona, California
• Manufacturer Part Number: 49-03055
• 2-Year Limited Warranty
• Note: This system does not include an exhaust tip

Fits 1998-2011 Ford Ranger XL, XLT, Edge, Sport, STX, and Splash models equipped with the 4.0L engine.

Improve your vehicle's exhaust flow with the aFe ATLAS Cat-Back exhaust system. This system is constructed from 4-inch mandrel-bent aluminized steel tubing, which eliminates the restrictions found in stock piping and provides a smooth path for exhaust gases. The result is improved horsepower and torque for your Ford Ranger.

Designed for a hassle-free installation, the ATLAS system utilizes all factory mounting locations for maximum stability. It features OE-style bayonet hangers that maintain proper pipe positioning even under high-vibration and extreme heat conditions. The included high-quality flange and band clamps provide a full 360-degree sealing surface to prevent leak paths and ensure long-term durability.

• 4-inch mandrel-bent aluminized steel tubing for increased flow
• OE-style bayonet hangers for stability and secure fitment
• Heavy-duty band clamps provide a 360-degree leak-free seal
• Installs directly to factory mounting points with included hardware
• Manufacturer Part Number: 49-03042-1

Fits 2011-2014 Ford F-150 models equipped with the V6-3.5L EcoBoost engine.

The aFe Atlas Cat-Back exhaust system is engineered to improve flow and durability for your F-150. Constructed from 4-inch mandrel-bent aluminized steel tubing, this system eliminates the restrictive kinks found in factory piping to maintain consistent exhaust gas velocity. The increased diameter and free-flow muffler design work together to reduce backpressure, delivering an aggressive exhaust note and documented gains of up to 28 ft-lbs of torque.

This system is designed for a precise fit using factory mounting locations. It features OE-style bayonet hangers to keep the pipe secure under high-heat and high-vibration conditions, while heavy-duty band clamps provide a 360-degree sealing surface to prevent leaks. The assembly is finished with a 304 stainless steel polished tip for a classic look and superior corrosion resistance.

• Manufacturer Part Number: 49-03041-P
• Tubing Diameter: 4-inch mandrel-bent aluminized steel
• Tip: 304 stainless steel polished exhaust tip
• Torque Gain: Up to +28 ft./lbs.
• Installation: Bolt-on using OE-style bayonet hangers and factory mounting points
• Emissions: 50-state legal
• Warranty: 2-year limited warranty
• Included: All hardware and band clamps for a complete installation

Fits 2011-2014 Ford F-150 models (V6-3.5L), including FX2, FX4, King Ranch, Lariat, Limited, Platinum, XL, and XLT.

Enhance the performance and sound of your EcoBoost-equipped Ford F-150 with the aFe Power Atlas Cat-Back Exhaust System. This system is engineered for maximum flow, replacing the restrictive factory exhaust with high-diameter, mandrel-bent 4-inch aluminized steel tubing. By smoothing the exhaust path and increasing volume, this kit effectively reduces backpressure to deliver gains of up to 28 ft./lbs. of torque and improved horsepower.

Built for durability and ease of installation, the Atlas system utilizes OE-style bayonet hangers to maintain pipe stability under high-vibration and high-heat conditions. Heavy-duty band clamps and an OE-style flange provide a 360-degree sealing surface for a leak-free fit. The system is finished with a 4-inch black 304 stainless steel tip for a sleek, aggressive aesthetic.

• Material: 4-inch mandrel-bent aluminized steel tubing
• Tip: Black coated 304 stainless steel
• Hangers: OE-style bayonet hangers for secure fitment
• Muffler: Included free-flow design for aggressive exhaust note
• Hardware: All necessary band clamps and flanges included
• Installation: Bolt-on using factory mounting locations
• Legal: 50-state emissions legal
• Warranty: 2-year limited warranty
• Part Number: 49-03041-B

Fits 2019-2025 Ram 2500 and 3500 trucks equipped with the L6-6.7L turbo diesel engine.

The aFe POWER ATLAS DPF-back exhaust system is designed to provide maximum flow and durability for your heavy-duty Ram. Built from 5-inch mandrel-bent aluminized steel tubing, this system maintains consistent diameters through every bend to minimize restriction. The assembly is 100% MIG-welded for structural integrity and utilizes factory-style bayonet hangers to ensure a secure, OE-style fit without requiring custom modifications. To finish the look, the system includes a massive 7-inch diameter polished stainless steel clamp-on exhaust tip featuring the aFe POWER logo.

• Manufacturer Part Number: 49-02078-P
• 5-inch mandrel-bent aluminized steel tubing for increased flow
• 7-inch diameter polished 304 stainless steel clamp-on exhaust tip
• Utilizes factory-style hangers and mounting points
• 100% MIG-welded for long-term durability
• Includes all necessary installation hardware

Vehicle Fitment:

Fits 2019-2025 Ram 2500 and 3500 trucks (L6-6.7L).

Upgrade your diesel's exhaust flow and appearance with the aFe POWER ATLAS DPF-back exhaust system. Engineered for maximum durability and a perfect fit, this system is constructed from massive 5-inch mandrel-bent aluminized steel tubing. Mandrel bending ensures the tubing maintains a consistent diameter throughout each curve, eliminating the restrictions and turbulence found in crush-bent alternatives. The system terminates in a massive 7-inch diameter stainless steel clamp-on tip with a sleek black finish for a bold, aggressive look.

Installation is straightforward and requires no custom fabrication. This system utilizes factory-style hangers that mount directly to existing locations for a secure, OE-quality fit. Every joint is 100% MIG-welded by hand for superior strength and longevity under heavy-duty towing and off-road conditions. All necessary hardware is included to ensure a hassle-free installation right out of the box.

• Part Number: 49-02078-B
• Tubing Diameter: 5-inch mandrel-bent aluminized steel
• Exhaust Tip: 7-inch diameter black stainless steel (clamp-on)
• Construction: 100% MIG-welded for maximum durability
• Installation: Bolt-on fitment using factory-style hangers
• Kit Includes: All necessary hardware for complete installation

Fits 2013-2018 Ram 2500 and 3500 models equipped with the L6-6.7L Turbo Diesel engine.

The aFe POWER MACH Force-XP Large Bore HD DPF-back exhaust system is engineered to improve exhaust flow and durability on your Cummins-powered Ram. Constructed from 5-inch mandrel-bent aluminized steel tubing, this system replaces the restrictive post-diesel particulate filter section to reduce backpressure and lower exhaust gas temperatures. The larger diameter and smooth transition bends ensure maximum flow for heavy-duty towing and performance applications.

This system is designed as a direct bolt-on upgrade, utilizing factory mounting locations and bayonet-style hangers for a secure, vibration-resistant fit. High-quality OE-style band clamps are included to provide a 360-degree sealing surface, eliminating the leak points common with traditional U-bolt clamps. The system is finished with a massive polished stainless steel tip featuring the aFe POWER badge for a refined, aggressive look.

• 5-inch mandrel-bent aluminized steel tubing for maximum flow and corrosion resistance
• High-quality band clamps provide a secure, leak-free seal
• Bayonet-style hangers maintain exhaust stability under heavy vibration
• Direct bolt-on installation requires no cutting or welding for most configurations
• Includes a polished stainless steel exhaust tip
• Manufacturer Part Number: 49-02051-1P

Fits 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) models equipped with the V6-3.6L engine.

The aFe POWER Twisted Steel Street Series Y-pipe is engineered to replace restrictive factory exhaust components, improving flow and performance on the trail or the street. Constructed from mandrel-bent 409 stainless steel tubing, this Y-pipe transitions from dual 2-1/4 inch inlets to a single 2-1/2 inch outlet to optimize exhaust scavenging and ensure long-term durability in harsh environments.

• Manufacturer Part Number: 48-48026
• Series: Twisted Steel Street Series
• Material: 409 Stainless Steel
• Tubing Diameter: 2-1/4 in. to 2-1/2 in.
• Construction: Mandrel-bent for maximum flow
• Installation: Direct replacement for OE Y-pipe

Fits 2018-2025 Jeep Wrangler (JL) and 2020-2025 Jeep Gladiator (JT) equipped with the V6-3.6L engine.

The aFe Twisted Steel Loop Delete Down-Pipe is engineered to solve a common packaging conflict on lifted Jeeps. On the driver's side, the factory exhaust loop often interferes with aftermarket long-arm lift kits. This down-pipe replaces that bulky factory loop section, providing the necessary clearance for suspension travel and articulation while maintaining a high-flow exhaust path.

Constructed from 2-1/2 inch mandrel-bent 409 stainless steel tubing, this pipe ensures smooth transitions and increased exhaust velocity. It is MIG welded for long-term durability and designed to work seamlessly with the factory Y-pipe. Note that some cutting of the factory loop is required for installation.

• Material: 2.5 inch 409 stainless steel mandrel-bent tubing
• Compatibility: Designed for Jeeps with long-arm lift kits
• Installation: Requires cutting of the factory loop; fits factory Y-pipe
• Construction: Durable MIG welds
• Manufacturer Part Number: 48-48024

Fits 2007-2011 Jeep Wrangler JK models equipped with the V6-3.8L engine.

Replace your restrictive factory exhaust manifolds with aFe Power Twisted Steel headers to unlock performance gains of up to +6 HP and +6 lbs. x ft. of torque. Engineered for durability and maximum exhaust flow, these headers are constructed from 1-1/2-inch 14-gauge 409 stainless steel tubing and feature heavy-duty 3/8-inch laser-cut flanges for a warp-resistant, leak-free seal.

Unlike standard formed collectors that can create turbulence and hinder flow, these headers utilize true mitered collectors. This pulse-control technology increases exhaust velocity and improves throttle response. The mandrel-bent curves maintain a consistent diameter throughout the tube, eliminating restrictions and ensuring smooth exhaust gas evacuation for long-term durability.

• Construction: 1-1/2" 14-gauge 409 stainless steel tubing
• Flanges: 3/8" thick laser-cut steel for a leak-free seal
• Collectors: True mitered design to decrease turbulence
• Installation: Direct bolt-on; no cutting or drilling required
• Compatibility: Retains factory catalytic converters and connects to OE or aFe exhaust
• Welding: 100% hand MIG-welded for maximum strength
• Manufacturer Part Number: 48-48023

Fitment Notes: aFe Power recommends purchasing spark plug wire boot protectors (P/N: 48-90001) and gaskets (P/N: 48-90004) for additional protection. This system is not currently CARB exempt and is not available for sale or use in California.

Fits 2012-2018 Jeep Wrangler and Wrangler JK (V6-3.6L).

The aFe Power Twisted Steel Y-pipe is engineered to optimize exhaust flow and provide the necessary clearance for aftermarket lift kits. This system connects the factory catalytic converters to either the stock exhaust or the aFe Mach FORCE XP exhaust system. Constructed from 2-inch into 2.5-inch mandrel-bent stainless steel tubing, it maintains consistent diameters through every bend to minimize restriction. Unlike restrictive formed collectors, this Y-pipe utilizes a true merged collector to eliminate dead space and turbulence, ensuring smooth exhaust gas transition for better performance and durability during off-road use.

Built for the long haul, this Y-pipe features 100% hand-welded construction and heavy-duty OE-style flanges for a leak-free seal. The bolt-on design allows for a straightforward installation using factory mounting locations without requiring cutting or modifications.

• Manufacturer Part Number: 48-46208
• Material: 409 Stainless Steel
• Tubing Diameter: Dual 2-inch to Single 2.5-inch
• Construction: Mandrel-bent tubing with a true merged collector
• Welding: 100% hand-MIG/TIG welded
• Emissions: 50-State Legal
• Compatibility: Works with stock or aFe Mach FORCE XP systems
• Included: All necessary hardware for installation
• Warranty: 2-Year Limited Warranty

Fits 2000-2006 Jeep Wrangler TJ models (I6-4.0L).

The aFe Power Twisted Steel performance header is engineered to optimize exhaust flow and velocity for the Jeep 4.0L engine. Using pulse control technology and mitered collectors, this header improves scavenging to ensure efficient power delivery across the entire RPM range. The assembly is constructed from 14-gauge 409 stainless steel tubing for superior heat resistance and durability compared to standard thin-wall headers.

To ensure a leak-free seal and prevent warping, aFe uses a precision-machined 1/2-inch thick head flange. This header is a 100% bolt-on upgrade, requiring no cutting or welding for installation, and is designed to retain all factory emissions components for street-legal performance.

• 14-gauge 409 stainless steel mandrel-bent tubing
• Heavy-duty 1/2" thick CNC-machined head flange
• Mitered collectors for improved exhaust velocity
• Retains all OE emission components
• TIG-welded construction for maximum structural integrity
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: 48-46202

Fits select 2005-2019 Nissan Frontier, Pathfinder, and Xterra (V6-4.0L).

aFe Power Twisted Steel performance headers are engineered to maximize exhaust flow and velocity for consistent power delivery across the entire RPM range. These headers utilize pulse control technology and mitered collectors to improve scavenging, replacing restrictive factory manifolds while retaining all OE emissions components for a true 100-percent bolt-on installation. Each header is constructed from durable 14-gauge 409 stainless steel tubing and features heavy-duty 1/2-inch thick head flanges to prevent warping and ensure a leak-free seal under extreme heat.

• Manufacturer Part Number: 48-46101
• Material: 14-gauge 409 stainless steel tubing
• Flange: 1/2-inch thick CNC-machined head flanges
• Construction: TIG-welded for superior strength and durability
• Technology: Pulse control technology with mitered collectors for increased flow
• Bends: CNC mandrel-bent tubing maintains consistent diameters
• Installation: Direct bolt-on design; requires no modifications
• Compliance: Retains all factory emissions components
• Origin: Engineered and built in Corona, CA
• Warranty: Limited Lifetime Warranty

Fits 2016-2020 Toyota Tacoma 4WD models (V6-3.5L).

The aFe Power Twisted Steel Y-pipe is engineered to replace the restrictive factory Y-pipe and improve exhaust flow on your Tacoma. This system is constructed from 2-1/4" to 2-1/2" mandrel-bent 409 stainless steel tubing for enhanced durability and consistent flow. It features dual high-flow catalytic converters that offer less resistance than original equipment, optimizing engine performance and sound. For a secure, leak-free seal, the system utilizes heavy-duty laser-cut machined stainless steel flanges. This 100% MIG-welded assembly is designed as a direct bolt-on solution, mounting to factory hangers and flanges without the need for cutting or modifications.

• Constructed from 2-1/4" to 2-1/2" mandrel-bent 409 stainless steel tubing
• Includes dual high-flow catalytic converters for maximum exhaust flow
• Heavy-duty laser-cut machined stainless steel flanges ensure a leak-free seal
• 100% MIG-welded for race-proven strength and longevity
• Direct bolt-on fitment uses factory mounting points and hangers
• Manufacturer Part Number: 48-46013-RC

Fits 2005-2015 Toyota Tacoma (V6-4.0L). This aFe Power Twisted Steel Y-pipe is engineered to replace the restrictive factory exhaust section, improving flow and durability on the trail or the street.

Constructed from 2-inch to 3-inch mandrel-bent 409 stainless steel tubing, this system is designed for maximum exhaust velocity and corrosion resistance. The assembly features EPA-compliant catalytic converters and is 100% MIG-welded for race-proven strength. For a reliable, leak-free seal, aFe utilizes heavy-duty laser-cut flanges that match factory specifications.

This Y-pipe is a direct bolt-on upgrade, utilizing factory-style hangers and mounting points for a hassle-free installation that requires no cutting or permanent vehicle modifications.

• Fits 2005-2015 Toyota Tacoma Base, Pre Runner, TRD Pro, and X-Runner (V6-4.0L)
• Mandrel-bent 2" to 3" 409 stainless steel tubing
• EPA-compliant catalytic converters
• Heavy-duty laser-cut flanges for a secure, leak-free seal
• 100% MIG-welded for maximum durability
• Direct bolt-on fitment with no cutting required
• Manufacturer Part Number: 48-46006-RC

Fits 2011-2017 Ford Mustang Base and V6 models (V6-3.7L).

Elevate your exhaust flow and engine performance with aFe Twisted Steel shorty headers. These headers are engineered specifically for the 3.7L Cyclone engine, replacing the restrictive factory manifolds with a high-flow design that produced dyno-verified gains of up to +14 HP and +15 lbs. x ft. of torque. Constructed from 1-5/8 inch mandrel-bent 409 stainless steel tubing, these headers offer superior durability and heat resistance for long-term street or track use.

• Mitered Merge Collectors: 3-to-1 mitered merge collectors decrease turbulence and increase exhaust velocity compared to standard formed collectors.
• Durable Construction: Features 100% MIG-welded joints for race-proven strength and heavy-duty, laser-cut machined mild steel flanges for a precision, leak-free seal.
• Bolt-On Installation: Designed as a direct bolt-on system that integrates with the factory exhaust; includes gaskets and lower outlet hardware with no cutting or modifications required.
• Part Number: 48-43031

Fits 2011-2026 Dodge Durango and 2011-2021 Jeep Grand Cherokee (WK2) models equipped with the 5.7L V8 engine.

Upgrade your HEMI’s exhaust flow with aFe Power Twisted Steel shorty headers. These headers are engineered for a direct-bolt-on installation, utilizing factory mounting locations and flanges to ensure a hassle-free fit with your stock exhaust system. Constructed from 1-5/8 inch mandrel-bent 304 stainless steel tubing, they provide superior exhaust scavenging and durability. The titanium ceramic coating provides an additional layer of thermal protection, reducing engine bay temperatures while protecting the headers from corrosion.

During in-house testing, this system produced gains of up to +6 horsepower and +7 lbs. x ft. of torque. Each set features heavy-duty laser-cut and machined flanges for a leak-free seal and is 100% MIG-welded for long-lasting strength under race or street conditions.

• Fits 5.7L V8 engines
• Constructed from 1-5/8 inch mandrel-bent 304 stainless steel
• Titanium ceramic coating for heat management and corrosion resistance
• Heavy-duty laser-cut and machined flanges for a secure seal
• 100% MIG-welded for maximum durability
• Designed for use with factory exhaust systems
• Manufacturer Part Number: 48-38029-T