Ensure a secure and precise connection for your aftermarket steering wheel with the Advan Racing X Chasing JS 2022 Steering Wheel Bolt Set. These bolts are engineered to provide reliable fastening, a critical component for both safety and steering feel. Designed for dedicated automotive enthusiasts, this set is crucial for properly mounting an aftermarket steering wheel to its hub adapter.

Crafted for durability and a precise fit, each bolt in this set helps maintain optimal steering integrity under all driving conditions. The consistent thread engagement ensures a snug, vibration-free installation, making them a direct and essential replacement or upgrade for your steering wheel mounting hardware.

• Manufacturer Part Number: ADVANSWB2022
• Designed for aftermarket steering wheel applications
• Constructed from durable, high-strength material
• Precision-machined threads for reliable fastening
• Enhanced finish resists corrosion and complements interior aesthetics

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500HD/3500HD equipped with the 6.6L LML Duramax diesel engine.

The Exergy Performance Fuel Rail Plug is designed to replace the factory pressure relief valve (PRV) on the LML Duramax engine. This "race plug" prevents high-pressure fuel from leaking back into the return system, a common issue in high-performance or heavy-load applications where increased fuel rail pressure can exceed the factory valve's spring tension.

By installing this solid plug, you ensure that full rail pressure is maintained at the injectors, preventing the pressure drops and low-rail-pressure codes often caused by a fatigued or leaking OEM relief valve.

• Direct replacement for the factory M16x1.5 relief valve
• Eliminates fuel pressure loss to the return circuit
• Essential for modified engines and high-demand performance builds
• Precision machined for a secure, high-pressure seal
• Manufacturer Part Number: 1-029-022

Ensure a secure, leak-free seal on your LML Duramax engine with the Exergy Performance 9th Injector Plug. This precision-machined component is designed to block off the 9th injector (hydrocarbon injector) port, a common requirement for specialized performance applications and setups where the factory regeneration injector is removed.

Constructed from high-grade stainless steel, this plug is built to withstand the high-heat environment of the exhaust system without corroding or failing. The included high-temperature O-ring ensures a positive seal against the port, preventing exhaust leaks and maintaining system integrity. This is a direct-fit solution for the LML platform, providing a much cleaner and more reliable alternative to makeshift blocking methods.

• Precision-machined from corrosion-resistant stainless steel
• Designed specifically for the LML Duramax 9th injector port
• Includes high-temperature O-ring for a reliable, leak-free seal
• Simple installation into factory mounting location
• Manufacturer Part Number: 1-018-342

Fits select 2018-2026 Jeep Wrangler JL and Wrangler Unlimited models.

The DV8 Offroad TSJL-02 Spare Tire Delete Kit allows you to streamline the rear profile of your Jeep Wrangler JL by removing the factory spare tire carrier while maintaining essential safety features. This kit provides a secure housing to relocate and protect the factory backup camera, ensuring your visibility is not compromised. It also includes hardware to move your license plate from the bumper to a more visible location on the tailgate, keeping your vehicle street-legal.

• Backup Camera Integration: Includes a protective housing designed specifically for the factory JL backup camera.
• License Plate Relocation: Moves the plate to a high-clearance position on the center of the tailgate.
• Integrated Lighting: Includes an LED light to ensure the license plate is properly illuminated.
• Easy Installation: This complete kit replaces the factory spare tire assembly and mounts directly to the tailgate.
• Part Number: TSJL-02

Fits 2007-2018 Jeep Wrangler JK. The DV8 Offroad TSJK-01 Spare Tire Delete replaces the factory spare tire assembly to maximize your vehicle's departure angle and streamline the rear profile. This assembly is constructed from durable 2mm and 4mm steel and finished in a micro-texture black powder coat for superior corrosion resistance on the trail. The design is fully bolt-on, utilizing factory mounting points to ensure no drilling or cutting of the body is required.

This kit provides a comprehensive solution for relocating your license plate, including an LED license plate light with weatherproof crimps. To maintain a clean, finished look, DV8 includes rubber plugs for the spare tire isolator holes and a watertight plug for the third brake light wiring grommet.

• Construction: 2mm and 4mm steel plate
• Finish: Micro-texture black powder coat
• Installation: 100% bolt-on; no drilling required
• Lighting: Included LED license plate light with weatherproof crimps
• Hardware: All necessary mounting hardware and rubber plugs included
• Part Number: TSJK-01

Fits 2021-2022 Ford Bronco.

The DV8 Spare Tire Delete (TSBR-01) provides a clean, finished appearance for Bronco owners who have removed the factory spare tire and carrier. This delete plate covers the exposed vents and mounting holes on the tailgate, streamlining the rear profile of the vehicle without sacrificing safety or utility. The design is engineered to maintain full functionality of your vehicle's electronics by providing secure relocation points for the factory backup camera, third brake light, and license plate light.

• Relocates and retains the OEM backup camera with full field of view
• Integrated mounts for the factory third brake light and license plate light
• Built-in license plate mounting bracket
• Provision to mount a single auxiliary pod light for enhanced rear visibility
• Replaces the entire factory spare tire assembly for a flush look
• Includes all necessary installation hardware
• Manufacturer Part Number: TSBR-01

Note: Basic wiring is required for the relocation of the license plate and brake light components.

Fits select 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models originally equipped with a factory soft top.

If your Jeep Wrangler JL left the factory with a soft top, it lacks the necessary mounting points required to secure an OEM or aftermarket hardtop. The DV8 Offroad HTJL-BR Hardtop Conversion Bracket Set provides a direct solution, allowing you to bolt down a hardtop safely and securely. These brackets are engineered to mimic the original equipment style and fitment at a significantly lower cost than purchasing individual components from a dealership.

This complete mounting kit ensures a precise fit for second-hand or aftermarket hardtop installations, replacing the missing factory hardware points on the rear tub. Constructed for durability and ease of installation, the set includes all necessary brackets and hardware for a straightforward conversion.

• Replaces/Adds missing factory hardtop mounting points
• Required for 2018+ JL models originally equipped with a soft top
• Includes all necessary installation hardware and brackets
• OEM-style fitment and function
• Manufacturer Part Number: HTJL-BR

Fits 2017-2021 Ford F-250 and F-350 Super Duty (XL, XLT, Lariat, King Ranch, Platinum, and Limited).

Installing an aftermarket bumper on your Ford Super Duty often obstructs the factory Adaptive Cruise Control (ACC) sensor. The DV8 Offroad FBFF2-BR Adaptive Cruise Control Relocation Bracket provides an engineered solution by moving the sensor from the bumper up into the grille. This repositioning ensures the radar system remains operational while allowing for greater bumper clearance and improved front-end aesthetics.

This bracket features an adjustable design, allowing you to fine-tune the sensor's angle for accurate calibration. It is finished in a durable textured black powder coat to resist corrosion and is designed to mount securely behind the factory grille. This relocation kit is compatible with any aftermarket bumper brand, making it an essential component for modified Super Duty trucks.

• Manufacturer Part Number: FBFF2-BR
• Relocates OEM ACC sensor to the grille area
• Finish: Textured Black Powder Coat
• Compatibility: Works with all aftermarket bumpers
• Design: Fully adjustable for precise sensor alignment
• Installation: Attaches to factory mounting points inside the grille

Fits 2021-2026 Ford Bronco models equipped with Adaptive Cruise Control. The DV8 Offroad ABBR-01 relocation bracket is an essential component for Bronco owners upgrading to high-clearance aftermarket front bumpers. This bracket moves the factory Adaptive Cruise Control (ACC) sensor module to a new position, ensuring the radar maintained a clear line of sight to the road for continued functionality of your driver-assist systems.

Constructed from durable steel, this bracket is engineered to withstand off-road vibrations and harsh environments. It features a premium 2-stage micro-texture black powder coat finish that provides superior corrosion resistance and matches the aesthetic of most aftermarket armor and bumpers.

• Relocates ACC sensor module to retain factory functionality with aftermarket bumpers
• Manufactured from heavy-duty steel for long-term durability
• Finished in a 2-stage micro-texture black powder coat
• Direct fit for 2021-2026 Ford Bronco submodels
• Manufacturer Part Number: ABBR-01

Fits 2022-2024 Subaru WRX models.

The Cobb Silicone Radiator Hose Kit is a direct-fit upgrade designed to replace the factory rubber hoses on your WRX. Over time, OEM rubber components can become brittle and prone to failure due to constant thermal cycling and pressure. This kit (B46410-BK) utilizes multi-layer reinforced silicone to provide superior durability and resistance to high temperatures, ensuring your cooling system remains reliable under both daily driving and spirited conditions.

• Precision-molded for a perfect fit on 2022-2024 Subaru WRX cooling systems
• Multi-layer reinforced silicone construction prevents hose expansion under pressure
• Higher heat and chemical resistance compared to standard OEM rubber
• Includes high-quality clamps for a secure, leak-free installation
• Manufacturer Part Number: B46410-BK

Fits 2015-2021 Subaru WRX and 2014-2018 Subaru Forester XT.

The Cobb Silicone Radiator Hose Kit (B43400-BK) is engineered as a high-performance replacement for the factory rubber hoses. Standard EPDM rubber hoses eventually become brittle and prone to failure due to repeated heat cycles and exposure to engine bay fluids. This kit utilizes high-grade multi-ply silicone to provide significantly higher burst pressures and superior thermal resistance, ensuring your cooling system remains pressurized and leak-free under demanding driving conditions.

• Direct-fit replacement for OEM radiator hoses
• Multi-ply silicone construction for long-term durability
• Superior temperature and pressure resistance compared to factory rubber
• Kit includes both upper and lower radiator hoses
• Maintains factory routing and clearance
• Manufacturer Part Number: B43400-BK

Fits 2008-2014 Subaru WRX and 2008-2021 Subaru STI.

Upgrade your cooling system with the Cobb Silicone Radiator Hose Kit. Factory rubber hoses are prone to drying out, cracking, and expanding under the high-pressure cycles of a performance cooling system. This kit provides a durable, heat-resistant alternative designed to withstand the thermal stress of spirited driving and track use.

• Direct replacement for OEM upper and lower radiator hoses
• Constructed from high-temperature multi-ply silicone for superior durability
• Increased resistance to coolant additives and pressure-induced expansion
• Maintains structural integrity longer than factory rubber components
• Black finish for a clean, professional engine bay appearance
• Manufacturer Part Number: B22400-BK

Fits select 2005-2017 Subaru WRX and 2005-2009 Legacy GT / 2.5GT.

The Cobb Silicone Top Mount Intercooler (TMIC) Coupler is a durable, heat-resistant replacement for the factory rubber unit, which is known to become brittle and leak over time. This coupler provides a secure, airtight connection between the turbocharger compressor outlet and the intercooler inlet, ensuring consistent boost pressure and engine performance.

Constructed from multi-ply reinforced silicone, this component (MPN 724455) is engineered to withstand higher temperatures and pressures than standard OEM hoses. The smooth internal bore helps reduce turbulence in the charge air path, while the black finish offers a clean, understated appearance in the engine bay.

• Manufacturer Part Number: 724455
• Material: High-temperature multi-ply reinforced silicone
• Color: Black
• Fitment: Replaces factory turbo-to-intercooler coupler
• Durability: Resistant to oil, fuel, and thermal degradation

Fits 2008-2021 Subaru WRX STI.

The COBB Silicone Turbo Inlet V2 (712450) is designed to replace the restrictive and often brittle factory plastic inlet. This upgraded component provides a larger internal diameter and a smoother air path to the turbocharger, reducing intake turbulence and improving throttle response across the powerband.

Constructed from multi-layer reinforced silicone, this inlet is engineered to withstand extreme engine bay temperatures and resist the degradation common with OE rubber parts. The V2 design features internal steel wire reinforcement to ensure the hose never collapses under high vacuum, maintaining consistent airflow even in high-boost applications.

• Internal steel wire reinforcement prevents collapsing under high vacuum
• Multi-layer silicone construction resists heat soak and chemical degradation
• Larger internal diameter than factory inlet for increased airflow capacity
• Smooth interior walls reduce air turbulence entering the turbocharger
• Direct-fit replacement for 2008-2021 Subaru STI models
• Manufacturer Part Number: 712450

Protect your critical braking components from extreme engine bay temperatures with the Cobb ABS Module Heat Shield (MPN: 5V2400). Fits select 2015-2021 Volkswagen GTI and Golf R (MK7/MK7.5), 2019+ Jetta GLI (A7), and 2015-2020 Audi A3/S3 (8V).

On the MQB platform, the ABS module is positioned in close proximity to the turbocharger and exhaust manifold. During spirited driving or track sessions, radiant heat can threaten the longevity of the module's sensitive electronics and hydraulic seals. This heat shield acts as a dedicated thermal barrier, reflecting heat away from the ABS pump and control unit to maintain consistent braking performance.

• Precision-cut from durable, corrosion-resistant 304 stainless steel.
• Specifically engineered for the MQB chassis layout to ensure proper clearance.
• Easy installation using existing factory mounting points.
• Protects internal ABS electronics and brake fluid from heat soak.
• Manufacturer Part Number: 5V2400.

Fits 2013-2015 Ford Focus ST models.

The Cobb Exhaust Hanger Kit is designed to eliminate the excessive movement and swaying common with the soft factory rubber mounts. This kit is a critical upgrade for Focus ST owners who have installed aftermarket cat-back exhaust systems or those experiencing rattles and tip misalignment due to worn OE hangers.

Constructed from high-durometer material, these hangers provide a much stiffer mounting solution that resists the high heat and stresses of performance driving. By securing the exhaust more firmly, they prevent the piping from contacting the chassis or rear fascia, ensuring your exhaust tips remain perfectly centered in the bumper cutouts.

• Direct-fit replacement for factory rubber hangers
• Reduces exhaust system movement and vibration
• Prevents exhaust contact with chassis and body panels
• Maintains consistent exhaust tip alignment
• Manufacturer Part Number: 591001

Fits 2010-2013 Mazda 3 Mazdaspeed.

The Cobb Exhaust Hanger Kit for the Gen2 Mazdaspeed3 is an essential upgrade for owners looking to stabilize their exhaust system. Factory rubber hangers are often too soft, allowing the exhaust to sway during spirited driving or under heavy load. This movement can lead to annoying rattles, potential contact with the rear bumper or chassis, and stress on the exhaust manifold and hangers.

This kit replaces the original equipment with high-durability hangers that provide a much firmer mount. It is particularly recommended when installing larger-diameter aftermarket cat-back or turbo-back exhaust systems that require more support than the stock bushings can provide. These hangers install directly into the factory mounting points without modification.

• Prevents exhaust sway and rattling by providing a more rigid mounting point
• Reduces stress on exhaust components and plumbing
• Direct replacement for worn or soft factory rubber hangers
• Designed specifically for the Gen2 Mazdaspeed3 chassis
• Manufacturer Part Number: 572001

Fits select 2005-2014 Subaru Legacy GT, WRX, and Forester XT models.

The Cobb SS Turbo Heat Shield is a critical component for managing under-hood temperatures. By containing the radiant heat generated by the turbocharger's exhaust housing, it prevents thermal soak into the intercooler and protects sensitive components like the brake master cylinder and wiring harnesses from heat damage. This shield is precision-engineered to replace or upgrade factory heat management for improved performance and engine bay longevity.

• Constructed from durable stainless steel for superior corrosion resistance
• Reduces engine bay temperatures to help maintain intercooler efficiency
• Retains heat within the turbocharger to assist with exhaust velocity
• Bolts to factory mounting points for a straightforward installation
• Manufacturer Part Number: 514510

Protect your engine bay components and maintain cooling efficiency with the Cobb Turbo Heat Shield (MPN 512510). This shield is designed for select 2002-2019 Subaru WRX, STI, and Forester XT models, providing a necessary thermal barrier between the turbocharger and critical parts like the intercooler, brake master cylinder, and wiring harnesses.

While the factory heat shield often interferes with aftermarket downpipes, the Cobb design offers ample clearance while effectively managing radiant heat. By containing the high temperatures generated by the turbo housing, this shield helps prevent heat soak, ensuring your intercooler can do its job and keep intake air temperatures stable during spirited driving.

• Fits 2002-2007 Subaru WRX, 2004-2019 Subaru STI, and 2004-2008 Subaru Forester XT
• Reduces radiant heat transfer to the engine bay and intercooler
• Designed to clear most aftermarket downpipe configurations
• Direct bolt-on installation using existing factory mounting points
• Manufacturer Part Number: 512510

Fits 2008-2021 Subaru WRX STI.

The Cobb Fuel Rail Line Kit (343250) provides a professional plumbing solution for STI owners upgrading their fuel delivery system. Designed to integrate with Cobb Fuel Rails, this kit replaces the restrictive factory lines with high-quality, fuel-rated hoses and fittings. By streamlining the flow to the EJ257 injectors, this kit helps ensure consistent fuel pressure across all cylinders, a critical factor in preventing the lean conditions and fuel stumbles often associated with modified Subaru flat-four engines.

• Specifically engineered for 2008-2021 Subaru WRX STI chassis
• High-quality fuel-rated hoses and fittings for long-term durability
• Optimizes fuel delivery path for more consistent pressure
• Designed for use with Cobb Fuel Rails (sold separately)
• Manufacturer Part Number: 343250

Fits 2008-2015 Subaru Impreza WRX STI and WRX STI models including Limited, Special Edition, and Launch Edition trims.

The Cobb Fuel Pressure Regulator (FPR) Manifold Reference Relocation Kit is an essential solution for the common fuel pressure oscillation or "stumble" issues found in GR and early VA chassis STIs. This kit relocates the manifold reference point for the factory fuel pressure regulator, providing a much cleaner vacuum and boost signal. This stabilization ensures more consistent fuel delivery, particularly during low-load transitions where the factory configuration often causes hesitation.

• Eliminates common fuel pressure oscillations and engine stumbling
• Provides a more accurate manifold reference signal to the FPR
• Direct-fit components for straightforward installation
• Includes all necessary vacuum lines and hardware
• Manufacturer Part Number: 315150

Fits 2004-2017 Subaru WRX and 2004-2016 Subaru STI.

These Cobb -6 AN Adapter Fittings are designed to streamline the installation of aftermarket fuel system components on your EJ-series engine. By converting the factory fuel connections to standard -6 AN plumbing, these adapters allow for the seamless integration of high-flow fuel rails, external regulators, and custom fuel lines. Each fitting is precision-machined for a secure, leak-free seal and features a black anodized finish to protect against corrosion and fuel-born degradation.

• Manufacturer Part Number: 312630
• Fitting Size: -6 AN
• Material: Machined aluminum with black anodized finish
• Quantity: Set of 2 fittings
• Function: Adapts factory fuel system connections to -6 AN flared fittings

The Addictive Desert Designs Clevis D-Ring Mounted Front License Plate Bracket provides a secure and adjustable mounting solution for vehicles equipped with aftermarket off-road bumpers. Engineered to install directly into D-ring mounts with a 1-inch hole, this bracket allows for legal plate display without permanent modification to the bumper face.

Built for the trail, the bracket features a swiveling design that allows the plate to move if it contacts an obstacle, reducing the risk of bending the mount or damaging the bumper. The assembly is easily removable to maximize approach angles during technical off-roading. The bracket is finished in a durable 2-stage hammer black powder coat for superior corrosion resistance and includes all necessary stainless steel hardware.

• Fits universal D-ring mounts with a 1-inch diameter hole
• Adjustable mounting configurations for various height requirements
• Swivel-action design helps prevent damage during obstacle contact
• Quickly removable for increased ground clearance
• Constructed with a 2-stage hammer black powder coat finish
• Includes stainless steel mounting hardware
• Made in the USA
• Manufacturer Part Number: AC9905201NA

Fits select 2007-2025 Jeep Wrangler JK, Wrangler JL, and Gladiator JT.

Maintain street legality without sacrificing the aggressive styling of your off-road build. This Addictive Desert Designs Stealth Fighter Front License Plate Bracket is engineered to provide a clean, secure mounting point for your front plate. Designed as a direct-fit accessory for the Stealth Fighter bumper series, it ensures your plate stays in place through high-vibration environments and off-road excursions.

• Specific Fitment: Designed exclusively for use with Addictive Desert Designs Stealth Fighter Front Bumpers.
• Resilient Finish: Coated in a hammer black powder coat to perfectly match your ADD bumper and provide long-term corrosion resistance.
• Integrated Design: Bolts directly to the bumper to maintain the slim profile and clearance of the Stealth Fighter series.
• Manufacturer Part Number: AC96154701NA

Fits 2023-2025 Ford F-250 and F-350 Super Duty trucks (King Ranch, Lariat, Limited, Platinum, XL, and XLT).

Upgrading to an aftermarket front bumper on the 2023-2025 Ford Super Duty often obstructs the factory Adaptive Cruise Control (ACC) sensor. This Addictive Desert Designs relocation bracket solves this issue by moving the ACC module to a secure position behind the grille, ensuring the system retains full functionality without interference. Designed for a precise fit, this bracket maintains the sensor's line of sight while keeping it protected.

Constructed in the USA from durable 1/8-inch aluminum, the bracket features a hammer black powder coat finish for superior corrosion resistance. This is a fully bolt-on solution that requires no permanent vehicle modifications for installation.

• Relocates Adaptive Cruise Control module to the grille area
• Maintains ACC functionality with aftermarket bumper upgrades
• Manufactured from 1/8-inch aluminum
• Hammer black powder coat finish
• Fully bolt-on installation
• Made in America
• Manufacturer Part Number: AC81152501NA

Fits 2023-2025 Ford F-250 and F-350 Super Duty models across all trim levels including XL, XLT, Lariat, King Ranch, Platinum, and Limited.

Addictive Desert Designs Ditch Light Brackets provide a low-profile mounting solution for supplemental peripheral lighting on your 2023+ Super Duty. These brackets are engineered to mount directly to the factory hood hinges near the A-pillar, ensuring your LED pods are positioned for maximum visibility without obstructing the driver's sightline. The fully bolt-on design allows for adjustable positioning, making it easy to aim your light exactly where it is needed on the worksite or the trail.

• Heavy-Duty Construction: Laser-cut from 1/8-inch American steel for maximum rigidity.
• Durable Finish: Treated with a hammer black powder coat to resist corrosion and match off-road aesthetics.
• Versatile Compatibility: Designed to accommodate LED pods up to 6 inches, including Rigid 3-inch cubes and Baja Designs LP6 series.
• Complete Set: Includes both driver and passenger side brackets (sold as a pair).
• Installation: 100% bolt-on; no drilling or permanent vehicle modifications required.
• Origin: Made in the USA.
• MPN: AC8101801NA

Fits all 2025 Ram 1500 trim levels, including RHO, Rebel, Laramie, Limited, and Tradesman.

Maintaining the functionality of your vehicle's safety systems is critical when upgrading to an aftermarket front bumper. The Addictive Desert Designs Adaptive Cruise Control (ACC) Relocation Kit (AC6305101NA) is engineered to move the factory radar sensor to a higher position behind the truck's grille. This provides the sensor with a clear field of view, ensuring the ACC system operates correctly without interference from the bumper structure or winch mounts.

• Relocates the factory ACC sensor for continued safety system operation
• Designed for a secure, bolt-on installation behind the front grille
• Preserves the clean aesthetic of the vehicle while providing necessary sensor clearance
• Specific to 2025 Ram 1500 models across all trim packages
• Manufacturer Part Number: AC6305101NA

Fits 2021-2024 Ram 1500 TRX models.

Addictive Desert Designs Ditch Light Brackets provide a versatile solution for adding auxiliary forward or side-angled lighting to your TRX. These brackets mount directly to the factory hood hinges, positioning your LED pods at the base of the A-pillars to keep them out of your direct line of sight while maintaining a low-profile look that follows the OEM body lines. Constructed from 1/8-inch American steel and finished in a durable hammer black powder coat, these brackets are built to withstand off-road use.

Designed for a clean installation, the brackets feature integrated wire management to tuck away harnesses and prevent snagging. This kit is a fully bolt-on upgrade, requiring no cutting or drilling, and is compatible with various lighting options ranging from 3-inch cubes up to 6-inch round lights, such as the Rigid 360 Series or Baja Designs LP6.

• Mounts LED light pods up to 6 inches
• Low-profile placement at the base of the A-pillar
• Constructed from 1/8-inch American steel
• Durable hammer black powder coat finish
• Integrated wire management for clean routing
• Includes driver and passenger side brackets
• 100% bolt-on installation; Made in the USA
• Manufacturer Part Number: AC6201801NA

Fits select 2019-2026 Chevrolet Silverado 1500/2500 and GMC Sierra 1500/2500 models.

The Addictive Desert Designs Shutter Motor Bracket is a critical solution for truck owners modifying their front-end configuration or installing aftermarket bumpers. This bracket serves as a dedicated physical limit stop for the factory active grille shutter motor. When the factory shutters are removed or relocated, the motor requires a mechanical stop to cycle against during its startup check; without it, the vehicle's ECU will typically trigger a persistent dashboard warning light or fault code.

• Function: Acts as a mechanical stop for the OE shutter motor to prevent electronic system errors.
• Fitment: Engineered for 2019-2026 GM 1500 and 2500 HD platforms (Silverado and Sierra).
• Installation: Replaces the need for the bulky factory shutter assembly when running modified cooling or bumper setups.
• MPN: AC4400901NA

Fits 2021-2025 Ford Bronco models.

When installing a high-clearance or winch-capable aftermarket front bumper on your 6th Gen Bronco, the factory Adaptive Cruise Control (ACC) sensor often requires relocation to maintain functionality. This Addictive Desert Designs relocation bracket is engineered to move the sensor behind the front grille, clearing the necessary space for ADD Offroad bumpers and other front-end modifications.

Constructed in the USA, this bracket features a rugged Hammer Black finish to ensure long-term durability against road debris and weather. While designed specifically for use with ADD Bronco front bumpers, its universal design offers a mounting solution for various aftermarket applications requiring ACC sensor repositioning.

• Relocates factory Adaptive Cruise Control sensor behind the grille
• Maintains ACC functionality with aftermarket front bumpers
• Durable Hammer Black powder coat finish
• American-made construction and fitment
• Compatible with winch-mount and low-profile bumper upgrades
• Manufacturer Part Number: AC23152501NA