This quick and easy to install, billet aluminum plug allows you to clean up your engine bay and get more aggressive turbo sound in minutes by removing the big plastic resonator connected to your OEM intake. 100% warranty and emissions friendly. CNC machined in the USA from 6061 aluminum. Black anodized finish with engraved Wehrli Custom Fabrication logo.

• Will fit on stock truck no other modifications or upgrades necessary!
• Black anodized finish with engraved logo
• NO Tuning required, bolt on!
• CNC Machined Billet Plug

This Part Fits:

Attaching a High Lifting Jack directly to the top of your Rhino-Rack Pioneer System has been made simple with the Pioneer High Lifting Jack Holder Bracket. Securely attach your High Lifting Jack in place with our strong, durable and corrosion resistant powder coated steel bracket. The Pioneer High Lifting Jack Holder Bracket will fit Pioneer Systems of all different sizes which is another reason Rhino-Rack creates the most useful roof rack systems in the world.

Rhino-Rack has engineered the Pioneer LED Light Bracket so lighting up the night whilst on the road with your LED lights has never been easier. Simply install LED lights to Rhino-Rack's range of Pioneer Roof Systems and don't let a shadow near again. The Pioneer Platform and Pioneer Tradie can have the LED Brackets fitted to either the front, back or sides of your vehicle. The Pioneer Tray can have LED Brackets fitted to the sides and rear only. Made from strong powder coated steel these Brackets are corrosion resistant, durable and stylish.

This Part Fits:

Our Adaptive Cruise Control Relocation Kit is required to maintain your ACC capabilities when mounting aftermarket front bumpers to 2024+ Ranger Raptors. The bracket is adjustable for fine tunability and designed to mount behind the grille. Finished with a hammer black powder coat. Made in America.

• Retains ACC Functions With Aftermarket Bumpers
• 2-Stage Hammer Black Powder Coat Finish
• Adjustable For Fine Tunability
• Mounts Behind The Grille
• Made In The USA

This Part Fits:

Leveling your later model Super Duty? Zone Offroad offers a replacement adjustable front track bar bracket designed to recenter the front axle at 1-3" of lift and eliminate any spring-to-frame interference potential with basic leveling kits. This high strength 1/4" steel, fully welded bracket bolt in place of the factory bracket. It utilizes a cam slot and offset cam locks to allow you recenter the axle while keeping the track bar operating angle in phase with the steering linkage for optimal handling. The bracket is a great option for leveled F250/F350 trucks and is compatible with most kits on the market.

• Uses offset cam locks to recenter the front axle at a range of lift heights
• High strength 1/4" steel construction, full welded
• Bolt-in design to replace factory bracket
• Compatible with most 1-3" lift kits

This Part Fits:

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

• Includes two U-bolts and four nuts
• 1310 and 1330 u-joint size
• u-joint U-bolt kit
• Fits Ford 9 In.
• Fits Ford 9"

This Part Fits:

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

• Includes two U-bolts and four nuts
• Fits 1350 And 1410 U-Joint Size
• u-joint U-bolt kit

This Part Fits:

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

• Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2", 12 bolt passenger car and truck and 1963-1979 Corvette
• Fits AMC Model 20; Dana Spicer 30/44; GM 8.2 in.; 12 Bolt Passenger Car/Truck/1963-1979 Corvette
• Includes two U-bolts and four nuts
• u-joint U-bolt kit
• 1330 u-joint size

This Part Fits:

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

• Cross Pin Bolt For GM 8.2 in. And 1963-1979 Corvette
• Cross pin bolt for GM 8.2" and 1963-1979 Corvette
• For OEM Positraction applications only

This Part Fits:

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

• Cross Pin Bolt For GM 12 Bolt Passenger Car And Truck
• For OEM Positraction applications only

This Part Fits:

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

• Cross Pin Bolt For Ford 9.75 in. And 10.25 in. w/C-Clip Axles
• Cross pin bolt for Ford 9.75" and 10.25" with c-clip axles
• 5/16 in. X 18 Thread
• 5/16" x 18 thread

This Part Fits:

With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Engineered for durability and long-lasting performance, this 10-pack of stainless steel clamps from MagnaFlow is built to withstand the toughest conditions. Each clamp is covered by MagnaFlow’s Limited Lifetime Warranty.

• Engineered To Create A 360 Degree Pressure Seal
• High-Strength Reaction Block
• Durable Stainless Steel
• Pack of 10

With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Engineered for durability and long-lasting performance, this 10-pack of stainless steel clamps from MagnaFlow is built to withstand the toughest conditions. Each clamp is covered by MagnaFlow’s Limited Lifetime Warranty.

• Engineered To Create A 360 Degree Pressure Seal
• High-Strength Reaction Block
• Durable Stainless Steel
• Pack of 10

Vehicle specific fitting kit required to mount ARB Bumper to the vehicle chassis. This fitting kit has been specially designed to work with this vehicle's safety systems.

• Includes All Hardware To Mount Bumper
• Vehicle Specific Design
• Bumper Mount Kit

This Part Fits:

Contains one 2.375" x 3" ID Silicone Reducer Boot 4.5" Long with Logo, one 3" T-Bolt Clamp and one 2.375-2.5" T-Bolt Clamp.

• Qty. 1 of 2.375" x 3" ID Silicone Reducer Boot 4.5" Long
• Qty. 1 of 2.375-2.5" T-Bolt Clamp
• Qty. 1 of 3" T-Bolt Clamp

This Billet Aluminum Beadroll Adapter Flange connects to the outlet (passenger / cold) side of the Intercooler. Adapts the OE slip/clip ring assembly to a precision machined bead roll joint allowing you to connect a 3.5" silicone boot/T-bolt clamp to the intercooler for custom intercooler pipe builds. NOTE: This part is designed for use with some aftermarket and custom fabricated high flow intercooler piping and turbo kits which are looking to adapt to the stock style intercooler outlet to a 3.5" silicone boot and bead roll joint.

• Adapts OE slip/clip ring assembly on the intercooler outlet to a bead roll joint allowing you to connect a 3.5" silicone boot/T-bolt clamp to the intercooler for custom intercooler piping builds
• Billet Aluminum Beadroll Adapter Flange connects to outlet (passenger) side of the OEM or aftermarket intercooler with stock clip ring style connections
• Includes O-Ring Seals and New Wire Retaining Clip
• Black Anodized Finish
• Made in USA

This Part Fits:

For use on tuned 2017-2023 L5P Duramax competition trucks equipped with VGT Style Turbochargers.

• Easy to install blanket keeps heat inside the turbo housing
• Durable high temperature exterior shell material
• Internally rated to over 2500 deg F direct heat
• Decreases under hood temperatures
• Stainless steel rivet fasteners
• Handmade in the USA

This Part Fits:

Reduce under hood temps, increase turbocharger efficiency and clean up the engine bay on your 2004.5-2016 Chevrolet Silverado or GMC Sierra 2500 / 3500 HD truck equipped with the 6.6L Duramax diesel with Made in USA heat blankets from WCFab. - - Did you know that a turbocharger heat blanket can help lower the direct radiant heat from your turbo exhaust housing by up to 80%? Keeping that wasted thermal energy inside the housing and out of your engine compartment helps maintain exhaust gas velocity driving the turbine to improve efficiency and response (spool up) of your engine's turbocharger. - - These hand crafted blankets are designed to conform tightly around the stock exhaust housing on your truck's VVT. - - Engineered for extreme performance use - internal ceramic insulation material for these blankets has been rated to withstand over 2,500 degrees Fahrenheit from a direct heat source and is protected by a durable wire mesh layer for maximum resistance to abrasion caused by engine vibration. Finished in a durable grey high temperature shell with stainless steel rivet fasteners to provide an attractive covering for the ugly raw stock turbo exhaust housing. - - Fitment Note: Not compatible with metal OEM turbo heat shields.

• VGT turbo heat blanket for 2004.5-2016 Chevy Silverado and GMC Sierra trucks equipped with the 6.6L Duramax Diesel Engine
• Improves turbo spool up - increases turbocharger efficiency by keeping heat energy inside the turbo housing
• Compatible with stock and aftermarket drop in replacement turbochargers for LLY, LBZ, LMM and LML Duramax
• Lowers underhood temperatures - Controls radiant exhaust heat
• Internally rated to over 2,500 deg F direct heat
• Durable high temperature exterior shell
• Stainless steel rivet fasteners
• Handmade in the USA
• Easy Installation

This Part Fits:

T6 Exhaust Housing Blanket for use with any S500, S400, GT50, GT55, Precision T6 exhaust housings.

• Easy to install blanket keeps heat inside the turbo housing
• Durable high temperature exterior shell material
• Internally rated to over 2500 deg F direct heat
• Decreases under hood temperatures
• Stainless steel rivet fasteners
• Handmade in the USA