This Part Fits:

This Part Fits:

This Union Tee by Firestone will solve your air pressure problems like no other. Use the tee to easily connect two air bags together so that you don't have to adjust the pressure for each bag individually.

These air line service kits from Firestone are designed for servicing your Ride-Rite, Sport-Rite, and Coil-Rite systems. They feature a coiled length of plastic air line tubing. The kits are available in different lengths, and diameters to kit your specific Firestone kit.

Xpedition XP5 interiors are EXTREMELY noisy. DEI’s new Sound Control kit significantly reduces engine noise & vibration, delivering a quieter, more comfortable cabin on every ride. This comprehensive kit features a clean factory-finished look, and is built from durable, high-quality materials. Backed by DEI’s trusted quality & performance and proudly made in the USA.Cabin RoofDEI D-Mat is precision CNC-cut to fit seamlessly inside the front and rear headliners, delivering effective sound deadening and thermal insulation across the entire roof area.

This Part Fits:

New Black Floor and Tunnel Shield solves the problem of blocking engine and exhaust heat while wanting a great, flexible, black finish. With a proprietary high temperature black coating, Black Floor and Tunnel Shield controls heat from getting into interiors and protects components from damage. Aggressive adhesive backing makes installation easy. Flexible - easily shapes to firewalls, trans tunnels, floors, and more. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Proprietary high temperature black coating Wind and water will not affect adhesive Minimum clearance required, only 3/16 in. thick Easily shape, trim, peel and stick Aggressive self-adhesive backing DO NOT apply directly to exhaust components. Bending in a metal break or making sharp bends may crack the black coating. This will not change the performance of the product.

• Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
• Serves As A Barrier To Unwanted Road/Tire And Engine Noise
• Aggressive Self-Adhesive Backing Holds Past 450Degrees F
• Withstands Direct High Temperatures Up To 1750Degrees
• Blocks Radiant Heat From Entering Driver Compartment
• Adheres To Almost Any Surface/Material/Fiberglass
• Minimum Clearance Required Only 3/16 in. Thick
• Easy To Form To Shapes And Contours
• Constructed From 10 Mil Aluminum
• Peel and stick adhesive backing
• Just Trim Peel And Stick

New Black Floor and Tunnel Shield solves the problem of blocking engine and exhaust heat while wanting a great, flexible, black finish. With a proprietary high temperature black coating, Black Floor and Tunnel Shield controls heat from getting into interiors and protects components from damage. Aggressive adhesive backing makes installation easy. Flexible - easily shapes to firewalls, trans tunnels, floors, and more. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Proprietary high temperature black coating Wind and water will not affect adhesive Minimum clearance required, only 3/16 in. thick Easily shape, trim, peel and stick Aggressive self-adhesive backing DO NOT apply directly to exhaust components. Bending in a metal break or making sharp bends may crack the black coating. This will not change the performance of the product.

• Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
• Serves As A Barrier To Unwanted Road/Tire And Engine Noise
• Aggressive Self-Adhesive Backing Holds Past 450Degrees F
• Withstands Direct High Temperatures Up To 1750Degrees
• Blocks Radiant Heat From Entering Driver Compartment
• Adheres To Almost Any Surface/Material/Fiberglass
• Minimum Clearance Required Only 3/16 in. Thick
• Easy To Form To Shapes And Contours
• Constructed From 10 Mil Aluminum
• Peel and stick adhesive backing
• Just Trim Peel And Stick

Trans Tunnel Plate Heat Shield blocks exhaust heat from coming through the transmission tunnel keeping interior cool and comfortable. A well known and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the C5 Corvette (1997-2005) Transmission Tunnel Reinforcement Plates and into the vehicle's interior. This shield reduces the negative effects of in-cabin excessive high temperatures and improve the experience of driving a Corvette. Reduce console & interior temperatures Precision die cut for a perfect fit & ease of installation No need to remove the Trans Tunnel Plate Peel backing, align into position & press into place Not affected by wind, water or other harsh conditions Extremely light weight

• Outer Material Withstands Up To 1750 Degrees Of Direct Heat
• Aggressive Adhesive Backing Holds Past 450 Degrees Of Heat
• Custom Cut To Size
• Adhesive Backed

This Part Fits:

DEI Hoodliner Insulation Kits are custom cut kits made from our Black Under Hood(TM) material. It controls engine heat and noise that is often a problem with today's modified vehicles packed with high performance components. These pre-cut hood insulation kits are the perfect replacement for your worn out, dirty hood liner, while protecting your paint from engine heat and chemicals. Each kit is custom CNC cut and have an aggressive adhesive backing makes for an easy installation. Replacement for dirty worn out hood liners Black textured finish Cooler hood surfaces protects your paint Reduced engine noise for quieter passenger compartment Easy peel & stick installation CNC cut for a precise fit Fits '66 -'67 Nova

• Black Textured Finish Looks Great And Is Long Lasting
• Self Stick - Just Peel And Stick Installation
• Precut To Fit Factory Hoods

This Part Fits:

Mini Versa Shields(TM) solve the problem of failing starters and other components due to heat soak. Mini Versa Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa Shield. 5.25 in. W x 16.5 in. L Universal: trim length to size Edges close with hook & loop design Protect master cylinders, cool cans, distributors, fuel pumps & more No need to remove starter for installation in most cases

• Protects Master Cylinders/Cool Cans/Distributors/Fuel Pumps
• Withstands 500Degrees F Of Direct Heat/2000Degrees Radiant
• Edges Attach To Itself With Hook And Loop Closure Design
• No Need To Remove Starter For Installation In Most Cases
• Can Easily Be Removed For Shows
• Universal-Trim Length To Size
• 5.25 in. x 16.5 in.

The C8 Corvette is an engineering marvel with its mid-engine configuration eye catching body lines and incredible performance. Yet with that engine placement comes an abundance of heat. One area Chevrolet added extra heat shielding is behind the rear tire in the exhaust cavity to protect from excessive exhaust heat. While the aluminum reflective substrate heat shielding is effective, it is a complete eye sore. Eliminate that eye sore while adding even more heat protection with black heat shielding from CORSA Performance. When placed behind the rear tire the heat shielding adds an added layer to protection from exhaust heat while eliminating the reflective eye sore seen through the exhaust bezzels on the C8 Corvette.

• Black Coated Aluminum Heat Shield With 1/8 In. Composite Glass Core
• Flexible And Pre-Shaped To Easily Fit C8 Rear Tire Cavity
• Easy Self-Adhesive Installation Simply Peel And Stick
• Adhesive Not Effected By Temperature; Wind Or Water
• For Use With Any Branded Exhaust Including Stock
• Tested To Withstand Temperatures Up To 1750 °F
• Adhesive Not Effected By Temperature
• Proprietary High Temp Black Coating
• Wind Or Water

This Part Fits:

TONNEAU COVER ADAPTORS BACKRACK(TM) does not make Tonneau Covers but we have created an accessory called the Tonneau Cover Adaptor Kit (TCA). This kit allows you to install certain types of Tonneau Covers with BACKRACK(TM) and Safety Rack Cab Guards. CLAMP TO THE RAIL TONNEAU COVERS Backrack(TM) Cab Guards sit on the bed rail at the front of the truck bed, over the front Stake Pockets. Tonneau Covers that encroach on this area are generally not compatible with BACKRACK(TM) products. Certain Tonneau Cover manufacturers clamp their covers to the inside rail of the truck bed, exposing the area above the Stake Pockets. These type of Tonneau Covers are compatible with BACKRACK(TM) Cab Guards. HOW DO THE TONNEAU COVER ADAPTORS WORK? The TCAs simply lift your BACKRACK(TM) Cab Guard up by one or two inches depending on your trucks make, model and year. BACKRACK(TM) Cab Guards need that increase in height to clear the Tonneau Cover. The TCAs also include extended Stake Pocket Bolts (SPBs) to replace the SPBs that came with your BACKRACK(TM) Cab Guard originally. These extended SPBs are required to accommodate the increased height. IS YOUR TONNEAU COVER COMPATIBLE? We have created a Tonneau Cover Compatibility Chart listing covers that are compatible with BACKRACK(TM) Cab Guards. Before purchasing a Tonneau Cover, be sure to refer to this Chart. Click on the icon above to view. Some covers may require slight modification and are listed on the Chart along with the fully compatible and incompatible Tonneau Covers.

• Tonneau Cover Adaptor

This Part Fits:

Replacement O-Ring for S400 Compressor outlet flanges. Used with the following WCFab products: LB7 Duramax S400 Single Turbo Install Kit (WCF100489), 2004.5-2007 5.9L Cummins S400 High Mount 2nd Gen Swap Kit (WCF100486), 2003-2007 5.9L Cummins S400/Stock Twin Turbo Kit (WCF100567), 2003-2007 5.9L Cummins S400/S400 Side by Side Compound (Twin) Turbo Kit (WCF100580)

• Replacement O-Ring Seal for use with Borg Warner S400 Turbocharger Compressor Cover Outlet V-Band Flanges

This quick and easy to install, billet aluminum plug allows you to clean up your engine bay and get more aggressive turbo sound in minutes by removing the big plastic resonator connected to your OEM intake. 100% warranty and emissions friendly. CNC machined in the USA from 6061 aluminum. Black anodized finish with engraved Wehrli Custom Fabrication logo.

• Will fit on stock truck no other modifications or upgrades necessary!
• Black anodized finish with engraved logo
• NO Tuning required, bolt on!
• CNC Machined Billet Plug

This Part Fits: