Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1815 products
1815 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$514.80
$369.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Chevrolet | Colorado | LT |
| 2023-2026 | Chevrolet | Colorado | Trail Boss |
| 2023-2026 | Chevrolet | Colorado | WT |
| 2023-2026 | Chevrolet | Colorado | Z71 |
| 2023-2026 | Chevrolet | Colorado | ZR2 |
| 2023-2026 | GMC | Canyon | AT4 |
| 2023-2024,2026 | GMC | Canyon | AT4X |
| 2023-2026 | GMC | Canyon | Denali |
| 2023-2026 | GMC | Canyon | Elevation |
$474.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Ford | Bronco | Raptor |
| 2024-2026 | Ford | Ranger | Raptor |
$212.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2024 | Toyota | GR Corolla | Circuit Edition |
| 2023-2025 | Toyota | GR Corolla | Core |
| 2023 | Toyota | GR Corolla | Morizo Edition |
| 2024-2025 | Toyota | GR Corolla | Premium |
| 2025 | Toyota | GR Corolla | Premium Plus |
$629.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | Sequoia | 1794 Edition |
| 2023-2026 | Toyota | Sequoia | Capstone |
| 2023-2026 | Toyota | Sequoia | Limited |
| 2023-2026 | Toyota | Sequoia | Platinum |
| 2023-2026 | Toyota | Sequoia | SR5 |
| 2023-2026 | Toyota | Sequoia | TRD Pro |
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2024-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2025 | Ford | Bronco | Stroppe Edition |
| 2021-2024 | Ford | Bronco | Wildtrak |
| 2025 | Ford | Ranger | Lariat |
| 2025 | Ford | Ranger | XLT |
$474.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2022-2024 | Ford | Bronco | Everglades |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2024 | Ford | Ranger | Lariat |
| 2024 | Ford | Ranger | XL |
| 2024 | Ford | Ranger | XLT |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2025 | Ford | F-250 Super Duty | King Ranch |
| 2017-2025 | Ford | F-250 Super Duty | Lariat |
| 2018-2024 | Ford | F-250 Super Duty | Limited |
| 2017-2025 | Ford | F-250 Super Duty | Platinum |
| 2017-2025 | Ford | F-250 Super Duty | XL |
| 2017-2025 | Ford | F-250 Super Duty | XLT |
| 2017-2025 | Ford | F-350 Super Duty | King Ranch |
| 2017-2025 | Ford | F-350 Super Duty | Lariat |
| 2018-2024 | Ford | F-350 Super Duty | Limited |
| 2017-2025 | Ford | F-350 Super Duty | Platinum |
| 2017-2025 | Ford | F-350 Super Duty | XL |
| 2017-2025 | Ford | F-350 Super Duty | XLT |
$317.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Lifetime Limited Warranty.
User 1Installation Instructions
- Easy to install with commonly available tool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Ford | Expedition | Active |
| 2020-2026 | Ford | Expedition | King Ranch |
| 2018-2024 | Ford | Expedition | Limited |
| 2025-2026 | Ford | Expedition | Max Active |
| 2020-2026 | Ford | Expedition | Max King Ranch |
| 2018-2024 | Ford | Expedition | Max Limited |
| 2018-2026 | Ford | Expedition | Max Platinum |
| 2018-2026 | Ford | Expedition | Max SSV |
| 2018-2019,2022 | Ford | Expedition | Max XL |
| 2018-2024 | Ford | Expedition | Max XLT |
| 2018-2026 | Ford | Expedition | Platinum |
| 2018-2026 | Ford | Expedition | SSV |
| 2022-2024 | Ford | Expedition | Timberline |
| 2025-2026 | Ford | Expedition | Tremor |
| 2018-2019,2022 | Ford | Expedition | XL |
| 2023-2024 | Ford | Expedition | XL STX |
| 2018-2024 | Ford | Expedition | XLT |
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
$19.68
$68.20
$549.45
The Innovate Motorsports Scg-1 Is A Revolutionary Approach To Boost Control That Integrates An Advanced Standalone Boost Controller With Innovates Industry Leading Directdigital Wideband Air Fuel Ratio Technology. When Innovate Motorsports Decided To Build A Boost Controller, They Knew They Had To Offer More Capabilities Than Other Products Available Today, While Still Maintaining The User Friendly Functionality Demanded By Their Customers. Instead Of Repackaging The Same Boost Control Technology That Has Been Used For Decades, Innovate Choose To Pair Their Advanced O2 Sensor Control Technology With An All-New, Proprietary Solenoid Control That Provides Superior Boost Control Accuracy, Response And Safety. Innovate Also Added A User Programmable Shift Light And Housed The Entire Package In A Compact Gauge Body For Ease Of Installation And Use. As With All Innovate Motorsports Air/Fuel Ratio Products, The Scg-1 Utilizes Our 100% Digital Wideband Air/Fuel Ratio Technology To Provide Real Time Feedback To The Scg-1. This Air/Fuel Information Is Displayed On An Integrated Oled Display Along With Manifold Pressure And Wastegate Duty Status. The Air/Fuel Ratio Information Is Also Used To Provide A User Definable Boost Cut That Enhances The Safety Margin Over Most Competitors Offerings That Only Rely On Over Boost Threshold. The Scg-1 Has A Full-Programmable Analog Output Ideal For Applications Using Standalone Ecus, Piggy-Back Ecus Or External Data Loggers. The Scg-1 Also Has A Digital Input/Output For Integration With Our Other Modular Tuning System (Mts) Devices. This Same Digital Output Can Be Used To Record Air/Fuel Ratio, Solenoid Duty Cycle, Engine Speed And Manifold Pressure With Our Free Logworks Pc Software To Help You Dial In A Perfect Boost Curve.
Installation Instructions- Programmable solenoid duty cycle with separate gain control function
$975.88
The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized 2.75" 6061-T6 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Being a twin turbo setup, the Y-Pipe was of critical concern and to get the flow balanced just right and for repeatability, our engineers designed a cast Y-piece for harmonized flow and ultimate power. The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a simple install.
Installation Instructions- Oversized piping reduces restriction providing increased airflow to the engine
- 6061-T6 aluminum piping replaces the brittle, failure-prone factory unit.
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Aluminum piping is mandrel-bent for smooth, unrestricted flow
- CNC machined quick connect flanges for an OE-Style attachment
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Precision cast Y-Pipe for balanced airflow between banks
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Available in two amazing finishes
- Made in Pomona California, USA
- SES9301ICPWB (Wrinkle Black)
- SES9301ICPWR (Wrinkle Red)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
$975.88
The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance intercooler charge pipe system to develop some serious bolt-on power. The soul of this charge pipe system is with our mandrel-bent, over-sized 2.75" 6061-T6 aluminum tube that provides a smooth uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Being a twin turbo setup, the Y-Pipe was of critical concern and to get the flow balanced just right and for repeatability, our engineers designed a cast Y-piece for harmonized flow and ultimate power. The engineering team also developed precision CNC machined adapter flanges that mimic the OE-Style connections for a simple install.
Installation Instructions- Oversized piping reduces restriction providing increased airflow to the engine
- 6061-T6 aluminum piping replaces the brittle, failure-prone factory unit.
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Aluminum piping is mandrel-bent for smooth, unrestricted flow
- CNC machined quick connect flanges for an OE-Style attachment
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Precision cast Y-Pipe for balanced airflow between banks
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Available in two amazing finishes
- Made in Pomona California, USA
- SES9301ICPWB (Wrinkle Black)
- SES9301ICPWR (Wrinkle Red)
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2024 | Ford | Bronco | Badlands |
| 2021-2023 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2021-2024 | Ford | Bronco | Wildtrak |
$793.62
This upgraded charge pipe system is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. The Injen hot-side pipe has an ID of 3.00in and the cold side has an ID of 3.25in. By utilizing oversized piping on both the hot side and the cold side, these charge pipes are able to reduce restriction, balance the airflow in and out of the intercooler to improve performance, and lower engine damaging exhaust gas temperatures (EGTs).
Installation Instructions- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined factory-style quick connections utilizing the OE spring clip
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Complete system including both HOT and COLD side piping
- Stainless Steel Band Clamps with Inner Protective Liner
- Pairs perfectly with Injen's EVO9004 cold air intake
- Cold side pipe is 2-pieces for easier installation
- Increase Throttle Response and Decreases Turbo Lag
- Automotive Grade Reinforced Silicone Couplers
- Manufactured from Mandrel-Bent 6061 Aluminum
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Cold Side Pipe Inside Diameter - 3.250in
- Works seamlessly with the OE intercooler
- Hot Side Pipe Inside Diameter - 3.00in
- Uses all factory mounting locations
- Made in Pomona California, USA
- Wrinkle Black ? SES9004ICPWB
- Available in three finishes
- Wrinkle Red ? SES9004ICPWR
- Polished - SES9004ICP
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$793.62
This upgraded charge pipe system is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. The Injen hot-side pipe has an ID of 3.00in and the cold side has an ID of 3.25in. By utilizing oversized piping on both the hot side and the cold side, these charge pipes are able to reduce restriction, balance the airflow in and out of the intercooler to improve performance, and lower engine damaging exhaust gas temperatures (EGTs).
Installation Instructions- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined factory-style quick connections utilizing the OE spring clip
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Complete system including both HOT and COLD side piping
- Stainless Steel Band Clamps with Inner Protective Liner
- Pairs perfectly with Injen's EVO9004 cold air intake
- Cold side pipe is 2-pieces for easier installation
- Increase Throttle Response and Decreases Turbo Lag
- Automotive Grade Reinforced Silicone Couplers
- Manufactured from Mandrel-Bent 6061 Aluminum
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Cold Side Pipe Inside Diameter - 3.250in
- Works seamlessly with the OE intercooler
- Hot Side Pipe Inside Diameter - 3.00in
- Uses all factory mounting locations
- Made in Pomona California, USA
- Wrinkle Black ? SES9004ICPWB
- Available in three finishes
- Wrinkle Red ? SES9004ICPWR
- Polished - SES9004ICP
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$452.63
This cold side charge pipe is an upgrade over the factory unit and is manufactured from oversized mandrel-bent 6061 aluminum and every bend and TIG weld is completed by hand at the Injen Technology headquarters in Pomona, California. Having an internal diameter of 3.25in, this charge pipe is able to reduce restriction and quickly transfer cool air from the intercooler directly into the engine. The cold side pipe also aides in balancing airflow from the intercooler to improve performance and also helps lower engine damaging exhaust gas temperatures (EGTs).
Installation Instructions- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined factory-style quick connections utilizing the OE spring clip
- For Optimum performance, use with Injen's EVO9004 cold air intake
- Includes all necessary hardware for a hassle-free installation
- Pairs perfectly with Injen's SES9004ICPH Hot Side Charge Pipe
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Replaces the restrictive and crack-prone OEM charge pipe
- Stainless Steel Band Clamps with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Automotive Grade Reinforced Silicone Couplers
- Manufactured from Mandrel-Bent 6061 Aluminum
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Works seamlessly with the OE intercooler
- Cold Side Pipe Inside Diameter - 3.25in
- Uses all factory mounting locations
- Made in Pomona California, USA
- Wrinkle Black ? SES9004ICPCWB
- Wrinkle Red ? SES9004ICPCWR
- Available in three finishes
- Polished - SES9004ICPC
- Cold Side Piping Only
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2022 | Ford | F-250 Super Duty | King Ranch |
| 2017-2022 | Ford | F-250 Super Duty | Lariat |
| 2018-2022 | Ford | F-250 Super Duty | Limited |
| 2017-2022 | Ford | F-250 Super Duty | Platinum |
| 2017-2022 | Ford | F-250 Super Duty | XL |
| 2017-2022 | Ford | F-250 Super Duty | XLT |
| 2017-2022 | Ford | F-350 Super Duty | King Ranch |
| 2017-2022 | Ford | F-350 Super Duty | Lariat |
| 2018-2022 | Ford | F-350 Super Duty | Limited |
| 2017-2022 | Ford | F-350 Super Duty | Platinum |
| 2017-2022 | Ford | F-350 Super Duty | XL |
| 2017-2022 | Ford | F-350 Super Duty | XLT |
$464.39
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
- NOTE: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- The increased flow allows for lower EGT's and increased power numbers
- Heavy Duty, Automotive grade couplers for strength and durability
- Mandrel-bent Tubing for Increased Flow and smooth transitions
- Manufactured from 2.50in lightweight 6061-T6 Aluminum Piping
- Uses all factory mounting locations for simple installation
- Includes all necessary hardware for a hassle-free install
- Stainless Steel Band Clamps with Inner Protective Liner
- Beaded Tube Ends for secure connections and fitment
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime warranty
- Includes BOTH hot and cold side pipes
- Available in three beautiful finishes
- SES9002ICPWB Wrinkle Red finishes
- Made in Pomona California, USA
- SES9002ICPWR Wrinkle Black
- SES9002ICP Polished
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ford | Focus | ST |
$464.39
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
- NOTE: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- The increased flow allows for lower EGT's and increased power numbers
- Heavy Duty, Automotive grade couplers for strength and durability
- Mandrel-bent Tubing for Increased Flow and smooth transitions
- Manufactured from 2.50in lightweight 6061-T6 Aluminum Piping
- Uses all factory mounting locations for simple installation
- Includes all necessary hardware for a hassle-free install
- Stainless Steel Band Clamps with Inner Protective Liner
- Beaded Tube Ends for secure connections and fitment
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime warranty
- Includes BOTH hot and cold side pipes
- Available in three beautiful finishes
- SES9002ICPWB Wrinkle Red finishes
- Made in Pomona California, USA
- SES9002ICPWR Wrinkle Black
- SES9002ICP Polished
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ford | Focus | ST |
$379.73
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Technical DrawingInstallation Instructions
Installation Instructions
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Performance Stepped design utilizing 2.25"and 2.50"piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Available in Polished and Black
- Made in Pomona California, USA
- Machined Air Temp Sensor
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2014 | Dodge | Dart | Aero |
| 2013 | Dodge | Dart | Limited |
| 2013 | Dodge | Dart | Rallye |
| 2013 | Dodge | Dart | SXT |
$379.73
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Technical DrawingInstallation Instructions
Installation Instructions
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Performance Stepped design utilizing 2.25"and 2.50"piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Includes both hot and cold side pipes
- Uses all factory mounting locations
- Available in Polished and Black
- Made in Pomona California, USA
- Machined Air Temp Sensor
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2014 | Dodge | Dart | Aero |
| 2013 | Dodge | Dart | Limited |
| 2013 | Dodge | Dart | Rallye |
| 2013 | Dodge | Dart | SXT |
$466.74
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Installation Instructions- Oversized piping reduces restriction providing increased airflow to the engine
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Unique CNC Machined Injen Logo Plate for a Refined Style
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Mandrel-Bent Tubing For Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | BMW | Z4 | M40i |
| 2020 | BMW | Z4 | M40i First Edition |
| 2020-2021 | BMW | Z4 | sDrive M40i |
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2023 | Toyota | GR Supra | A91-MT Edition |
| 2020-2023 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2023 | Toyota | GR Supra | Premium |
$466.74
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Installation Instructions- Oversized piping reduces restriction providing increased airflow to the engine
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- Includes all necessary hardware for a hassle-free installation
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Unique CNC Machined Injen Logo Plate for a Refined Style
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Mandrel-Bent Tubing For Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | BMW | Z4 | M40i |
| 2020 | BMW | Z4 | M40i First Edition |
| 2020-2021 | BMW | Z4 | sDrive M40i |
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2023 | Toyota | GR Supra | A91-MT Edition |
| 2020-2023 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2023 | Toyota | GR Supra | Premium |
$466.74
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler*. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Installation Instructions- Oversized piping reduces restriction providing increased airflow to the engine
- Precision CNC machined quick connect flanges for an OE-Style attachment
- Our aluminum piping replaces the brittle, failure-prone factory unit.
- Available in Polished, Wrinkle Black, and Wrinkle Red finishes
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Manufactured from 2.75? Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Unique CNC Machined Injen Logo Plate for a Refined Style
- Stainless Steel Band Clamp with Inner Protective Liner
- Increase Throttle Response and Decreases Turbo Lag
- Injen Technology Limited Lifetime Warranty
- Seamlessly adapts with the OE Intercooler
- Mandrel-Bent Tubing For Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Includes one 1/8? Female NPT bung
- Made in Pomona California, USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2023 | BMW | Z4 | M40i |
| 2020 | BMW | Z4 | M40i First Edition |
| 2020-2021 | BMW | Z4 | sDrive M40i |
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2023 | Toyota | GR Supra | A91-MT Edition |
| 2020-2023 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2023 | Toyota | GR Supra | Premium |
$580.80
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Technical DrawingDatasheet
Installation Instructions
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
- Performance stepped design utilizing 2.25", 2.50"and 2.75"piping
- Precision CNC machined, and TIG-Welded sensor flanges included
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Available in Polished, Black, and Wrinkle Red finishes
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Automotive Grade Silicone Couplers
- Hot and cold side piping included
- Made in Pomona, California USA
- Upper Intercooler Piping
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2014 | Nissan | Juke | Nismo |
| 2014 | Nissan | Juke | Nismo RS |
| 2011-2014 | Nissan | Juke | S |
| 2011-2014 | Nissan | Juke | SL |
| 2011-2014 | Nissan | Juke | SV |
$245.69
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Installation InstructionsTechnical Drawing
Installation Instructions
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Stepped design utilizing 2.00"and 2.50"piping
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Available in Polished and Black Finishes
- Mandrel-bent Tubing for Increased Flow
- 23 3/4 in. x 11 3/4 in. x 3 3/8 in.
- Automotive Grade Silicone Couplers
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2012 | Mitsubishi | Lancer | Ralliart |
| 2010-2011 | Mitsubishi | Lancer | Ralliart Sportback |
$430.29
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Installation InstructionsInstallation Instructions
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Precision CNC machined, and TIG-Welded sensor flanges included
- Includes all necessary hardware for a hassle-free installation
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Optional front mount intercooler P/N # FM1582i
- Stepped design utilizing 2.25"and 2.50"piping
- Unique Injen Logo Plate for a Refined Style
- One TIG-Welded 1/8"NPT fitting included
- Mandrel-bent Tubing for Increased Flow
- Uses all factory mounting locations
- Automotive Grade Silicone Couplers
- Hot and cold side piping included
- Uses Factory Mounting Locations
- Made in Pomona, California USA
- No intercooler included.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R |
$652.52
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
- Precision CNC machined, and TIG-Welded sensor flanges included
- Manufactured from 2.25"Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Available in 3 amazing colors for that personal touch
- Increase Throttle Response and Decreases Turbo Lag
- Optional front mount intercooler P/N# FM1573i
- Unique Injen Logo Plate for a Refined Style
- Backed By Injens Limited Lifetime Warranty
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Automotive Grade Silicone Couplers
- Hot and Cold side pipes included
- Intercooler not included
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | EX |
| 2016-2021 | Honda | Civic | EX-L |
| 2016-2018 | Honda | Civic | EX-T |
| 2017-2021 | Honda | Civic | LX |
| 2017-2020 | Honda | Civic | Si |
| 2017-2021 | Honda | Civic | Sport |
| 2017-2021 | Honda | Civic | Sport Touring |
| 2016-2021 | Honda | Civic | Touring |
$652.52
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
- Precision CNC machined, and TIG-Welded sensor flanges included
- Manufactured from 2.25"Lightweight 6061-T6 Aluminum Piping
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stainless Steel Band Clamp with Inner Protective Liner
- Available in 3 amazing colors for that personal touch
- Increase Throttle Response and Decreases Turbo Lag
- Optional front mount intercooler P/N# FM1573i
- Unique Injen Logo Plate for a Refined Style
- Backed By Injens Limited Lifetime Warranty
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Automotive Grade Silicone Couplers
- Hot and Cold side pipes included
- Made in Pomona, California USA
- Intercooler not included
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | EX |
| 2016-2021 | Honda | Civic | EX-L |
| 2016-2018 | Honda | Civic | EX-T |
| 2017-2021 | Honda | Civic | LX |
| 2017-2020 | Honda | Civic | Si |
| 2017-2021 | Honda | Civic | Sport |
| 2017-2021 | Honda | Civic | Sport Touring |
| 2016-2021 | Honda | Civic | Touring |
$467.92
Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
Technical DrawingInstallation Instructions
Installation Instructions
- This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Uses all factory mounting locations Includes all necessary hardware for a hassle-free installation
- Precision CNC machined, and TIG-Welded sensor flanges included
- Beaded Tube Ends to Help Prevent Couplers from Coming Off
- Stepped pipe design using 2.0", 2.50", and 2.75"Piping
- Stainless Steel Band Clamp with Inner Protective Liner
- Manufactured from Lightweight 6061-T6 Aluminum Piping
- Increase Throttle Response and Decreases Turbo Lag
- Unique Injen Logo Plate for a Refined Style
- Injen Technology Limited Lifetime Warranty
- Mandrel-bent Tubing for Increased Flow
- Intercooler Pipes Hot And Cold Side
- Automotive Grade Silicone Couplers
- Hot and Cold side pipes included
- Made in Pomona, California USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2012 | Hyundai | Genesis Coupe | 2.0T |
| 2010-2012 | Hyundai | Genesis Coupe | 2.0T Premium |
| 2010-2012 | Hyundai | Genesis Coupe | 2.0T R-Spec |
| 2010 | Hyundai | Genesis Coupe | 2.0T Track |
Showing 1080/1815
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.