Give your Ford Super Duty the durability boost it deserves with the Mishimoto Intercooler Pipe and Boot Kit for the 1999-2003 Ford F-Series 7.3L Powerstroke. These workhorse turbodiesels produce mounds of boost pressure to churn out the serious torque that you need. This abuse takes its toll on the intercooling system, especially the piping. The Mishimoto pipe and boot kit replaces the stock system with a pair of tough, mandrel-bent aluminum pipes for both the intercooler's hot and cold sides for maximum durability. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power to add even more reliability. For the best performance, make sure to pair this kit with our Mishimoto Ford 7.3l Powerstroke Performance Intercooler. The Mishimoto Intercooler Pipe and Boot kit for the Ford F-Series 7.3L Powerstroke is available in a polished and wrinkle-black powder-coated finish and includes the Mishimoto Lifetime Warranty for a worry-free installation.

• Includes Mishimoto Silicone Boots with DuraCore Technology and Mishimoto Constant Tension T-bolt Clamps
• Mandrel-bent polished aluminum pipes for maximum durability
• Installs in under one hour

This Part Fits:

Give your Ford Super Duty the durability boost it deserves with the Mishimoto Intercooler Pipe and Boot Kit for the 1999-2003 Ford F-Series 7.3L Powerstroke. These workhorse turbodiesels produce mounds of boost pressure to churn out the serious torque that you need. This abuse takes its toll on the intercooling system, especially the piping. The Mishimoto pipe and boot kit replaces the stock system with a pair of tough, mandrel-bent aluminum pipes for both the intercooler's hot and cold sides for maximum durability. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power to add even more reliability. For the best performance, make sure to pair this kit with our Mishimoto Ford 7.3l Powerstroke Performance Intercooler. The Mishimoto Intercooler Pipe and Boot kit for the Ford F-Series 7.3L Powerstroke is available in a polished and wrinkle-black powder-coated finish and includes the Mishimoto Lifetime Warranty for a worry-free installation.

• Includes Mishimoto Silicone Boots with DuraCore Technology and Mishimoto Constant Tension T-bolt Clamps
• Mandrel-bent polished aluminum pipes for maximum durability
• Installs in under one hour

This Part Fits:

Don't get stuck stranded on the side of the road with a broken plastic factory cold-side intercooler pipe! Upgrade to a Mishimoto 2017+ Ford 6.7L Powerstroke cold-side intercooler pipe and boot kit. The Mishimoto Powerstroke cold-side pipe is constructed of mandrel-bent aluminum with a polished finish. The engineers at Mishimoto designed a CNC-machined quick-disconnect flange and IAT sensor housing to allow for an easy install. This intercooler pipe and boot kit is direct-fit, retaining all factory emissions components and does not require the use of a tuner. The Mishimoto 2017+ Ford 6.7L Powerstroke cold-side pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow and power. This kit includes Mishimoto silicone Boots with DuraCore? technology. Mishimoto DuraCore? technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone Diesel Boots. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots, preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto'stainless Steel Constant-Tension T-Bolt Clamps for accurate and consistent holding power. Like all our Powerstroke performance parts this kit is covered by our Mishimoto Lifetime Warranty.

• CNC-machined stock-style coupling allows for quick install
• Replaces weak stock plastic pipe
• Installs in under an hour

This Part Fits:

Mishimoto has developed an intercooler pipe and boot kit for the 2011+ 6.7L Powerstroke for customers looking to upgrade both cold-side and hot-side intercooler pipes at the same time! Upgrade to the Mishimoto kit for increased reliability, durability, and performance. The pipes are constructed of mandrel bent aluminum with a polished finish and eliminate restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. The engineers at Mishimoto designed CNC-machined quick-disconnect flanges and IAT sensor housing to allow for an easy install in less than two hours. This intercooler pipe and boot kit is direct fit, retaining all factory emissions components and does not require the use of a tuner. This kit includes Mishimoto silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This pipe and boot kit is the perfect addition to the Mishimoto 6.7L Powerstroke Performance Primary Radiator and like all of our Powerstroke performance parts includes the Mishimoto Lifetime Warranty. v

• Mandrel-bent, polished aluminum pipes eliminates restrictive bends
• CNC-machined factory-style coupling allows for quick install
• Improves airflow, power, and EGTs

This Part Fits:

2011-2015 Ford F-250 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty Lariat 6.7 Liter 6R140, 2013-2015 Ford F-250 Super Duty Platinum 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty Lariat 6.7 Liter 6R140, 2013-2015 Ford F-350 Super Duty Platinum 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty XLT 6.7 Liter 6R140, 2011-2012 Ford F-450 Super Duty King Ranch 6.7 Liter 5R110W, 2011-2015 Ford F-450 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-450 Super Duty Lariat 6.7 Liter 5R110W, 2011-2015 Ford F-450 Super Duty Lariat 6.7 Liter 6R140, 2013-2015 Ford F-450 Super Duty Platinum 6.7 Liter 6R140, 2011-2015 Ford F-450 Super Duty XL 6.7 Liter 5R110W, 2011-2015 Ford F-450 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-450 Super Duty XLT 6.7 Liter 5R110W, 2011-2015 Ford F-450 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-550 Super Duty Lariat 6.7 Liter 5R110W, 2011-2015 Ford F-550 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-550 Super Duty XL 6.7 Liter 5R110W, 2011-2015 Ford F-550 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-550 Super Duty XLT 6.7 Liter 5R110W, 2011-2015 Ford F-550 Super Duty XLT 6.7 Liter 6R140

• Mandrel-bent, polished aluminum pipe eliminates restrictive bends
• CNC-machined factory-style coupling allows for quick install
• Improves airflow, power, and EGTs

This Part Fits:

2011-2015 Ford F-250 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty Lariat 6.7 Liter 6R140, 2013-2015 Ford F-250 Super Duty Platinum 6.7 Liter 6R140, 2013-2015 Ford F-250 Super Duty Platinum 6.7 Liter 6R140, 2013-2015 Ford F-250 Super Duty Platinum 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XL 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-250 Super Duty XLT 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty King Ranch 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty Lariat 6.7 Liter 6R140, 2011-2015 Ford F-350 Super Duty Lariat 6.7 Liter 6R140, 2013-2015 Ford F-350 Super Duty Platinum 6.7 Liter 6R140 ...See Application Guide for Additional Fitments

• CNC-machined stock-style coupling allows for quick install
• Replaces weak stock plastic pipe
• Installs in under an hour

This Part Fits:

Mishimoto has developed a hot-side intercooler pipe and boot kit for the 2008-2010 6.4L Powerstroke. The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.4L; upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto Cold-Side Pipe is constructed of mandrel bent aluminum with a polished finish. The engineers at Mishimoto designed this kit to be a two piece pipe kit, compared to the factory one piece pipe, allowing for much easier installation and removal. The Mishimoto Hot-Side Pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This hot-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke Performance Intercooler and Mishimoto 6.4L Powerstroke Cold-Side Intercooler Pipe and Boot Kit. It is made in the USA and includes the Mishimoto Lifetime Warranty.

• 3-in mandrel-bent, polished aluminum pipe eliminates restrictive bends
• 2-piece design allows for easy removal and installation
• Provides improvement in airflow, power, and EGTs

This Part Fits:

Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2008-2010 6.4L Powerstroke.The factory pipe and boot features numerous restrictive bends and does not stand a chance against the heat and pressure of your high-powered 6.4L; upgrade to the Mishimoto kit for increased reliability, durability, and performance.The Mishimoto cold-side pipe is made right here in the USA, and is constructed of mandrel bent aluminum with a polished finish.The Mishimoto cold-side pipe eliminates restrictive bends in the factory pipe, which allows for improvements in airflow, power, and EGTs.This kit includes Mishimoto silicone boots with DuraCore technology.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power.This cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke performance intercooler and includes our signature lifetime warranty.

• Mandrel-bent, polished aluminum pipe eliminates restrictive bends
• Provides improvement in airflow, power, and EGTs
• Replaces restrictive factory plastic pipe

This Part Fits:

2005 Ford F-250 Super Duty FX4 6.0 Liter S6-650, 2005 Ford F-250 Super Duty FX4 6.0 Liter TorqShift, 2004 Ford F-250 Super Duty Harley-Davidson Edition 6.0 Liter 4R100, 2006-2007 Ford F-250 Super Duty Harley-Davidson Edition 6.0 Liter 5R110W, 2004-2005 Ford F-250 Super Duty Harley-Davidson Edition 6.0 Liter TorqShift, 2004 Ford F-250 Super Duty King Ranch 6.0 Liter 4R100, 2006-2007 Ford F-250 Super Duty King Ranch 6.0 Liter 5R110W, 2004-2005 Ford F-250 Super Duty King Ranch 6.0 Liter TorqShift, 2003-2004 Ford F-250 Super Duty Lariat 6.0 Liter 4R100, 2003-2004 Ford F-250 Super Duty Lariat 6.0 Liter 4R100, 2006-2007 Ford F-250 Super Duty Lariat 6.0 Liter 5R110W, 2003-2007 Ford F-250 Super Duty Lariat 6.0 Liter S6-650, 2003-2007 Ford F-250 Super Duty Lariat 6.0 Liter S6-650, 2003-2005 Ford F-250 Super Duty Lariat 6.0 Liter TorqShift, 2003-2005 Ford F-250 Super Duty Lariat 6.0 Liter TorqShift, 2003-2004 Ford F-250 Super Duty XL 6.0 Liter 4R100, 2003-2004 Ford F-250 Super Duty XL 6.0 Liter 4R100, 2006-2007 Ford F-250 Super Duty XL 6.0 Liter 5R110W, 2003-2007 Ford F-250 Super Duty XL 6.0 Liter S6-650, 2003-2007 Ford F-250 Super Duty XL 6.0 Liter S6-650, 2003-2005 Ford F-250 Super Duty XL 6.0 Liter TorqShift, 2003-2005 Ford F-250 Super Duty XL 6.0 Liter TorqShift, 2003-2004 Ford F-250 Super Duty XLT 6.0 Liter 4R100, 2003-2004 Ford F-250 Super Duty XLT 6.0 Liter 4R100, 2006-2007 Ford F-250 Super Duty XLT 6.0 Liter 5R110W, 2003-2007 Ford F-250 Super Duty XLT 6.0 Liter S6-650, 2003-2007 Ford F-250 Super Duty XLT 6.0 Liter S6-650, 2003-2005 Ford F-250 Super Duty XLT 6.0 Liter TorqShift, 2003-2005 Ford F-250 Super Duty XLT 6.0 Liter TorqShift, 2004 Ford F-350 Super Duty Harley-Davidson Edition 6.0 Liter 4R100, 2006-2007 Ford F-350 Super Duty Harley-Davidson Edition 6.0 Liter 5R110W, 2004-2005 Ford F-350 Super Duty Harley-Davidson Edition 6.0 Liter TorqShift, 2004 Ford F-350 Super Duty King Ranch 6.0 Liter 4R100 ...See Application Guide for Additional Fitments

• Mandrel-bent, polished aluminum pipe eliminates restrictive bends
• Replaces weak factory plastic pipe
• Improves airflow, power, and EGTs

This Part Fits:

2003-2004 Ford F-250 Super Duty 6.0 Liter 4R100, 2003-2004 Ford F-250 Super Duty 6.0 Liter 4R100, 2006-2007 Ford F-250 Super Duty 6.0 Liter 5R110W, 2003-2007 Ford F-250 Super Duty 6.0 Liter S6-650, 2003-2007 Ford F-250 Super Duty 6.0 Liter S6-650, 2003-2005 Ford F-250 Super Duty 6.0 Liter TorqShift, 2003-2005 Ford F-250 Super Duty 6.0 Liter TorqShift, 2003-2004 Ford F-350 Super Duty 6.0 Liter 4R100, 2003-2004 Ford F-350 Super Duty 6.0 Liter 4R100, 2006-2007 Ford F-350 Super Duty 6.0 Liter 5R110W, 2003-2007 Ford F-350 Super Duty 6.0 Liter S6-650, 2003-2007 Ford F-350 Super Duty 6.0 Liter S6-650, 2003-2005 Ford F-350 Super Duty 6.0 Liter TorqShift, 2003-2005 Ford F-350 Super Duty 6.0 Liter TorqShift, 2003-2004 Ford F-450 Super Duty 6.0 Liter 4R100, 2003-2004 Ford F-450 Super Duty 6.0 Liter 4R100, 2006-2007 Ford F-450 Super Duty 6.0 Liter 5R110W, 2003-2007 Ford F-450 Super Duty 6.0 Liter S6-650, 2003-2007 Ford F-450 Super Duty 6.0 Liter S6-650, 2003-2005 Ford F-450 Super Duty 6.0 Liter TorqShift, 2003-2005 Ford F-450 Super Duty 6.0 Liter TorqShift, 2003-2004 Ford F-550 Super Duty 6.0 Liter 4R100, 2003-2004 Ford F-550 Super Duty 6.0 Liter 4R100, 2006-2007 Ford F-550 Super Duty 6.0 Liter 5R110W, 2003-2007 Ford F-550 Super Duty 6.0 Liter S6-650, 2003-2007 Ford F-550 Super Duty 6.0 Liter S6-650, 2003-2005 Ford F-550 Super Duty 6.0 Liter TorqShift, 2003-2005 Ford F-550 Super Duty 6.0 Liter TorqShift

• DuraCore technology provides superior resistance to heat, pressure, fuel, and oil
• Mandrel-bent, polished aluminum pipes eliminates restrictive bends
• Improves airflow, power, and EGTs

This Part Fits:

If you own an F10 or F13 M5/M6, chances are you've already thought about modifying it. A tune and increased boost pressure are usually one of the first mods done, but the factory plastic charge pipes may throw a wrench in your plans. The factory plastic charge pipes are a known weak link in the intake system and it's not uncommon for them to split at the plastic welds by the turbo or completely burst along the seam, leaving you with a frustrating boost leak. The Mishimoto F1X M5/M6 Charge Pipes are a durable, full aluminum construction, expertly TIG-welded to ensure a smooth and strong airflow path for the S63's boost. Our charge pipes are specifically designed to deliver optimal airflow with a more uniform shape from turbo to intercooler without sacrificing fitment. To provide the utmost perfect fitment, along with the charge pipes, we also include a CNC-machined 6061 aluminum bracket to hold the metal coolant lines that are supported by the factory intake tubes. Our charge pipe kit also includes a pair of matte black silicone couplers for a secure and stock styled connection to the air-to-water intercooler. The Mishimoto F1X M5/M6 Charge Pipes include the Mishimoto Lifetime Warranty for a worry-free installation.

• Holds up against increased boost pressure better than factory plastic pipes
• Full aluminum TIG-welded construction for maximum durability
• Includes bung for simple integration of methanol injection

This Part Fits:

Replace your restrictive and failure-prone factory intercooler pipe with the Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit, precision engineered for flawless fitment and optimal flow for the Mitsubishi Evolution X.The kit includes everything needed to upgrade your lower intercooler pipe, remove restrictive bends, and support substantial boost pressure and horsepower.This kit features polished 2.5 mandrel-bent aluminum piping and four-layer 100-percent silicone couplers with heat-resistant embedded fibers, which offer increased heat and pressure tolerance compared to the factory rubber connections.Whether you have a daily-driven Evo or a rally project, dependable charge-air connections are essential for reliable operation.The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection.These clamps provide the holding power you need for increased boost pressures! This kit is available with black, red, or blue couplers and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Your choice of black, red, or blue couplers
• Lightweight, polished aluminum pipes
• Mishimoto Lifetime Warranty

This Part Fits:

Improve airflow and turbo spool with Mishimoto mandrel bent aluminum intercooler pipes for the Mitsubishi Lancer Evolution 7/8/9. These pipe kits are designed with high-horsepower vehicles in mind and feature bead-rolled pipe ends for prevention of leaks and coupler disconnection. The Mishimoto Evolution 7/8/9 Intercooler Pipe Kit features silicone couplers that provide increased heat and pressure tolerance compared to the stock rubber counterparts. Whether you have a daily driven Evolution or a stripped and caged time attack car, airflow efficiency is key to optimizing your charge air system. The Mishimoto Evolution 7/8/9 intercooler pipes are available for purchase separately or as a kit. As with all our products, this kit is guaranteed by the Mishimoto Lifetime Warranty, ensuring superior quality and craftsmanship.

• Eliminates restrictive bends found in the stock piping, providing more efficient airflow
• Improves turbocharger spool and provides support for high-horsepower vehicles
• Lightweight, mandrel bent, polished aluminum pipes

This Part Fits:

2015 Chevrolet Silverado 2500 HD High Country 6.6 Liter 1000, 2015 Chevrolet Silverado 2500 HD High Country 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 2500 HD LT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 2500 HD LT 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 2500 HD LTZ 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 2500 HD LTZ 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 2500 HD WT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 2500 HD WT 6.6 Liter 6L90, 2015 Chevrolet Silverado 3500 HD High Country 6.6 Liter 1000, 2015 Chevrolet Silverado 3500 HD High Country 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 3500 HD LT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 3500 HD LT 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 3500 HD LTZ 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 3500 HD LTZ 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 3500 HD WT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 3500 HD WT 6.6 Liter 6L90, 2015 GMC Sierra 2500 HD Base 6.6 Liter 1000, 2015 GMC Sierra 2500 HD Base 6.6 Liter 6L90, 2011-2015 GMC Sierra 2500 HD Denali 6.6 Liter 1000, 2011-2015 GMC Sierra 2500 HD Denali 6.6 Liter 6L90, 2011-2015 GMC Sierra 2500 HD SLE 6.6 Liter 1000, 2011-2015 GMC Sierra 2500 HD SLE 6.6 Liter 6L90, 2011-2015 GMC Sierra 2500 HD SLT 6.6 Liter 1000, 2011-2015 GMC Sierra 2500 HD SLT 6.6 Liter 6L90, 2011-2014 GMC Sierra 2500 HD WT 6.6 Liter 1000, 2011-2014 GMC Sierra 2500 HD WT 6.6 Liter 6L90, 2015 GMC Sierra 3500 HD Base 6.6 Liter 1000, 2015 GMC Sierra 3500 HD Base 6.6 Liter 6L90, 2011-2015 GMC Sierra 3500 HD Denali 6.6 Liter 1000, 2011-2015 GMC Sierra 3500 HD Denali 6.6 Liter 6L90, 2011-2015 GMC Sierra 3500 HD SLE 6.6 Liter 1000, 2011-2015 GMC Sierra 3500 HD SLE 6.6 Liter 6L90, 2011-2015 GMC Sierra 3500 HD SLT 6.6 Liter 1000, 2011-2015 GMC Sierra 3500 HD SLT 6.6 Liter 6L90, 2011-2014 GMC Sierra 3500 HD WT 6.6 Liter 1000, 2011-2014 GMC Sierra 3500 HD WT 6.6 Liter 6L90

• 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
• Provides improvement in airflow, power, and EGTs
• Requires no additional tuning

This Part Fits:

2015 Chevrolet Silverado 2500 HD High Country 6.6 Liter 1000, 2015 Chevrolet Silverado 2500 HD High Country 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 2500 HD LT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 2500 HD LT 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 2500 HD LTZ 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 2500 HD LTZ 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 2500 HD WT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 2500 HD WT 6.6 Liter 6L90, 2015 Chevrolet Silverado 3500 HD High Country 6.6 Liter 1000, 2015 Chevrolet Silverado 3500 HD High Country 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 3500 HD LT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 3500 HD LT 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 3500 HD LTZ 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 3500 HD LTZ 6.6 Liter 6L90, 2011-2015 Chevrolet Silverado 3500 HD WT 6.6 Liter 1000, 2011-2015 Chevrolet Silverado 3500 HD WT 6.6 Liter 6L90, 2015 GMC Sierra 2500 HD Base 6.6 Liter 1000, 2015 GMC Sierra 2500 HD Base 6.6 Liter 6L90, 2011-2015 GMC Sierra 2500 HD Denali 6.6 Liter 1000, 2011-2015 GMC Sierra 2500 HD Denali 6.6 Liter 6L90, 2011-2015 GMC Sierra 2500 HD SLE 6.6 Liter 1000, 2011-2015 GMC Sierra 2500 HD SLE 6.6 Liter 6L90, 2011-2015 GMC Sierra 2500 HD SLT 6.6 Liter 1000, 2011-2015 GMC Sierra 2500 HD SLT 6.6 Liter 6L90, 2011-2014 GMC Sierra 2500 HD WT 6.6 Liter 1000, 2011-2014 GMC Sierra 2500 HD WT 6.6 Liter 6L90, 2015 GMC Sierra 3500 HD Base 6.6 Liter 1000, 2015 GMC Sierra 3500 HD Base 6.6 Liter 6L90, 2011-2015 GMC Sierra 3500 HD Denali 6.6 Liter 1000, 2011-2015 GMC Sierra 3500 HD Denali 6.6 Liter 6L90, 2011-2015 GMC Sierra 3500 HD SLE 6.6 Liter 1000, 2011-2015 GMC Sierra 3500 HD SLE 6.6 Liter 6L90, 2011-2015 GMC Sierra 3500 HD SLT 6.6 Liter 1000, 2011-2015 GMC Sierra 3500 HD SLT 6.6 Liter 6L90, 2011-2014 GMC Sierra 3500 HD WT 6.6 Liter 1000, 2011-2014 GMC Sierra 3500 HD WT 6.6 Liter 6L90

• 3.5-in mandrel-bent aluminum polished pipes eliminate restrictive bends
• Provides improvement in airflow, power, and EGTs
• Requires no additional tuning

This Part Fits:

Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2006-2010 6.6L Duramax.The factory pipe and boot do not stand a chance against the heat and pressure of your high-powered Duramax; upgrade to the Mishimoto kit for increased reliability, durability, and performance.The Mishimoto cold-side pipe is made right here in the USA and is constructed of mandrel bent aluminum with a polished finish.The Mishimoto cold-side pipe eliminates restrictive bends in the factory pipe, which allows for improvements in airflow, power, and EGTs.This kit includes Mishimoto silicone boots with DuraCore technology.Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots.Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power.This cold-side pipe and boot kit is the perfect addition to the Mishimoto 6.6L Duramax performance intercooler and includes our signature lifetime warranty.

• 3.5-in mandrel-bent aluminum polished pipes eliminate restrictive bends
• Provides improvement in airflow, power, and EGTs
• Requires no additional tuning

This Part Fits:

2004-2010 Chevrolet Silverado 2500 HD 6.6 Liter 1000, 2004-2007 Chevrolet Silverado 2500 HD 6.6 Liter 4L80-E, 2007-2010 Chevrolet Silverado 2500 HD 6.6 Liter 6L90, 2004-2007 Chevrolet Silverado 2500 HD 6.6 Liter NV4500, 2004-2006 Chevrolet Silverado 2500 HD 6.6 Liter S6-650, 2004-2007 Chevrolet Silverado 3500 6.6 Liter 1000, 2004-2007 Chevrolet Silverado 3500 6.6 Liter 4L80-E, 2004-2007 Chevrolet Silverado 3500 6.6 Liter NV4500, 2004-2006 Chevrolet Silverado 3500 6.6 Liter S6-650, 2007-2010 Chevrolet Silverado 3500 HD 6.6 Liter 1000, 2007-2010 Chevrolet Silverado 3500 HD 6.6 Liter 6L90, 2004-2010 GMC Sierra 2500 HD 6.6 Liter 1000, 2004-2010 GMC Sierra 2500 HD 6.6 Liter 1000, 2004-2007 GMC Sierra 2500 HD 6.6 Liter 4L80-E, 2004-2007 GMC Sierra 2500 HD 6.6 Liter 4L80-E, 2007-2010 GMC Sierra 2500 HD 6.6 Liter 6L90, 2004-2007 GMC Sierra 2500 HD 6.6 Liter NV4500, 2004-2007 GMC Sierra 2500 HD 6.6 Liter NV4500, 2004-2006 GMC Sierra 2500 HD 6.6 Liter S6-650, 2004-2006 GMC Sierra 2500 HD 6.6 Liter S6-650, 2004-2007 GMC Sierra 3500 6.6 Liter 1000, 2004-2007 GMC Sierra 3500 6.6 Liter 1000, 2004-2007 GMC Sierra 3500 6.6 Liter 4L80-E, 2004-2007 GMC Sierra 3500 6.6 Liter 4L80-E, 2004-2007 GMC Sierra 3500 6.6 Liter NV4500, 2004-2007 GMC Sierra 3500 6.6 Liter NV4500, 2004-2006 GMC Sierra 3500 6.6 Liter S6-650, 2004-2006 GMC Sierra 3500 6.6 Liter S6-650, 2007-2010 GMC Sierra 3500 HD 6.6 Liter 1000, 2007-2010 GMC Sierra 3500 HD 6.6 Liter 6L90

• Mandrel-bent aluminum polished pipes eliminate restrictive bends
• Includes hot side pipes and boots
• Provides improvement in airflow

This Part Fits:

2004-2005 Chevrolet Silverado 2500 HD 6.6 Liter 1000, 2002-2003 Chevrolet Silverado 2500 HD 6.6 Liter 1000/M74, 2002-2005 Chevrolet Silverado 2500 HD 6.6 Liter 4L80-E, 2002 Chevrolet Silverado 2500 HD 6.6 Liter 4L80-E-HD/MN8, 2004-2005 Chevrolet Silverado 2500 HD 6.6 Liter NV4500, 2002-2003 Chevrolet Silverado 2500 HD 6.6 Liter NV4500/MW3, 2004-2005 Chevrolet Silverado 2500 HD 6.6 Liter S6-650, 2002-2003 Chevrolet Silverado 2500 HD 6.6 Liter S6-650/ML6, 2004-2005 Chevrolet Silverado 3500 6.6 Liter 1000, 2002-2003 Chevrolet Silverado 3500 6.6 Liter 1000/M74, 2002-2005 Chevrolet Silverado 3500 6.6 Liter 4L80-E, 2004-2005 Chevrolet Silverado 3500 6.6 Liter NV4500, 2002-2003 Chevrolet Silverado 3500 6.6 Liter NV4500/MW3, 2004-2005 Chevrolet Silverado 3500 6.6 Liter S6-650, 2002-2003 Chevrolet Silverado 3500 6.6 Liter S6-650/ML6, 2004-2005 GMC Sierra 2500 HD 6.6 Liter 1000, 2004-2005 GMC Sierra 2500 HD 6.6 Liter 1000, 2002-2003 GMC Sierra 2500 HD 6.6 Liter 1000/M74, 2002-2005 GMC Sierra 2500 HD 6.6 Liter 4L80-E, 2002-2005 GMC Sierra 2500 HD 6.6 Liter 4L80-E, 2002 GMC Sierra 2500 HD 6.6 Liter 4L80-E-HD/MN8, 2004-2005 GMC Sierra 2500 HD 6.6 Liter NV4500, 2004-2005 GMC Sierra 2500 HD 6.6 Liter NV4500, 2002-2003 GMC Sierra 2500 HD 6.6 Liter NV4500/MW3, 2004-2005 GMC Sierra 2500 HD 6.6 Liter S6-650, 2004-2005 GMC Sierra 2500 HD 6.6 Liter S6-650, 2002-2003 GMC Sierra 2500 HD 6.6 Liter S6-650/ML6, 2004-2005 GMC Sierra 3500 6.6 Liter 1000, 2004-2005 GMC Sierra 3500 6.6 Liter 1000, 2002-2003 GMC Sierra 3500 6.6 Liter 1000/M74, 2002-2005 GMC Sierra 3500 6.6 Liter 4L80-E, 2002-2005 GMC Sierra 3500 6.6 Liter 4L80-E, 2004-2005 GMC Sierra 3500 6.6 Liter NV4500, 2004-2005 GMC Sierra 3500 6.6 Liter NV4500, 2002-2003 GMC Sierra 3500 6.6 Liter NV4500/MW3, 2004-2005 GMC Sierra 3500 6.6 Liter S6-650, 2004-2005 GMC Sierra 3500 6.6 Liter S6-650, 2002-2003 GMC Sierra 3500 6.6 Liter S6-650/ML6

• 3-in mandrel-bent aluminum polished pipes eliminate restrictive bends
• Includes both hot-side and cold-side intercooler pipes and boots
• Provides improvement in airflow, power, and EGTs

This Part Fits:

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

• Volcanic lava rock outer layer and 96-percent silica fiber inner layer for optimal heat protection
• Specifically designed for reducing engine bay temperatures in turbocharged vehicles
• Rated to 1800F direct heat and 2000F radiant heat

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

• Volcanic lava rock outer layer and 96-percent silica fiber inner layer for optimal heat protection
• Specifically designed for reducing engine bay temperatures in turbocharged vehicles
• Rated to 1800F direct heat and 2000F radiant heat

Help reduce the heat in your engine bay with the Mishimoto Turbo Blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces, which could lead to cooling issues depending on the placement. With the combination of a volcanic lava rock outer layer, and 96-percent silica inner layer, the Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. Our turbo blankets interior are rated to 2300 F, and can wIt'stand up to 1800 F direct exterior heat. The Mishimoto Turbo Blankets are available in a selection of sizes and also include the Mishimoto Lifetime Warranty for a worry free installation.

• Volcanic lava rock outer layer and 96-percent silica fiber inner layer for optimal heat protection
• Specifically designed for reducing engine bay temperatures in turbocharged vehicles
• Rated to 1800F direct heat and 2000F radiant heat

Take full control of your boost levels with the Mishimoto Manual Boost Controller. Constructed from high quality 6061 anodized aluminum and stainless-steel, this boost controller is sure to withstand the harshest of environments in your engine bay. The anodized aluminum body and stainless-steel internal components are designed to provide you a lifetime of service. Utilizing a stainless-steel ball-style detent system will ensure that your boost level is consistent and stays exactly where you set it. Easily adjust boost levels from under the hood with the turn of a knob with no additional tools needed. The knurled stainless steel adjustment knob makes it quick and easy to adjust. The Mishimoto Manual Boost controller is easy to install and offers an affordable solution to get better turbo response and increased boost levels. Includes mounting bracket to keep your controller safe and secure in the location of your choosing. Like all Mishimoto products, this manual boost controller is backed by our Mishimoto Lifetime Warranty.

• Precision machined detents for linear and repeatable boost adjustments
• Constructed from 6061 anodized aluminum and stainless-steel
• Adjust boost level with the turn of a knob

Since its introduction in 2010, the EcoBoost line of V6 engines has proven to be a fantastic alternative to large-displacement V8 options. Ample tuning potential and gobs of torque, all while returning great fuel mileage, make the EcoBoost platform a winner in our book. But, allowing your engine to breathe easier through intake and exhaust modifications can take the already impressive EcoBoost to another level of performance. That's why Mishimoto has developed this turbo inlet tube kit for your 2017-2020 Ford F-150 3.5L EcoBoost. This turbo inlet tube kit boasts an internal volume increase of up to 61-percent over the stock inlet pipes to allow your turbos to pull in as much air as they could ever need. Our engineers have also removed bottlenecks and other obstructions to reduce restriction by up to 23-percent over stock. All of this is achieved while protecting the intake charge from engine bay heat with a cross-linked polyethylene (XLPE) construction. This material is ideal for withstanding high engine bay temperatures and resists degradation from fuel and oil. To make this kit's reliability match its performance, we've CNC-machined every vacuum fitting from aluminum for a leak-free fit. The included EVAP fitting has also been CNC-machined and flow bench tested to 100-percent match the OEM part and ensure CEL-free performance. The Mishimoto turbo inlet tubes perform perfectly on the stock tune and fit with both the stock air intake box and the Mishimoto F-150 EcoBoost Performance Air Intake. The Mishimoto 2017-2020 Ford F-150 3.5L EcoBoost turbo inlet tube kit includes both turbo inlet tubes, DuraCore(TM) silicone couplers, and stainless-steel clamps for a hassle-free installation. So, toss your restrictive stock turbo inlet tubing in the trash and upgrade your intake airflow with the Mishimoto turbo inlet tube kit. As with all our F-150 EcoBoost products, this kit includes our signature Mishimoto Lifetime Warranty for a lifetime of performance.

• Precision-engineered rotational-molded design provides up to 61-percent increase in internal volume
• Reduces restriction by up to 23-percent over stock inlet pipes
• 5mm-thick rigid inlet tubing resists flexing and cracking

This Part Fits:

Supercharger Ribbed Pulley; 105MM Pulley; 7 Rib; Six Bolt; Must Use Adapter Hub;

• 105MM Ribbed Pulley

This Part Fits:

This Part Fits:

This Part Fits: