Fits 2008-2021 Subaru WRX STI models.

Reduce intake air temperatures and prevent heat soak on your EJ-powered Subaru with the Mishimoto Top-Mount Intercooler (TMIC) Kit. Engineered specifically for the 2008-2021 chassis, this intercooler features a high-efficiency 3.75-inch thick bar-and-plate core with a total volume of 584 in³. The dense offset fin pitch is optimized for maximum heat transfer, supporting vehicles from stock power levels up to 400 whp.

This intercooler utilizes cast aluminum end tanks that are precision TIG-welded to the core for maximum durability under high boost pressures. Testing on a stock vehicle showed a 10°F temperature drop compared to the factory unit, along with bolt-on power gains of +5 whp and +7 wtq. Installation is a direct bolt-on process that requires no modification to the stock A/C lines and can be completed in approximately 30 minutes.

• Core Specs: 3.75-inch thick bar-and-plate core with 584 in³ of volume
• Performance: Proven gains of +5 whp and +7 wtq on stock tuning
• Thermal Management: Provides a 10°F temperature drop versus the OEM intercooler
• Finish: Durable Stealth Black powder coating with Red silicone hoses
• Kit Contents: Intercooler, Y-pipe gaskets, BPV gasket, silicone PCV hose, and silicone throttle-body coupler
• MPN: MMTMIC-STI-08BKRD
• Warranty: Mishimoto Lifetime Warranty

Fits 2008-2021 Subaru WRX STI models including Limited, Special Edition, S209, and Type RA.

Designed to combat heat soak and high intake temperatures, the Mishimoto top-mount intercooler is a direct-fit upgrade for both stock and modified EJ-series engines. This intercooler features a high-efficiency bar-and-plate core with a 3.75-inch thickness and a total volume of 584 cubic inches. The dense offset fin pitch optimizes heat transfer, supporting vehicles ranging from stock power levels up to 400 whp. The assembly is built for durability with cast aluminum end tanks that are precision TIG-welded to the core.

During testing, this intercooler demonstrated a 10°F temperature drop compared to the factory unit, while providing bolt-on gains of +5 whp and +7 wtq on a stock test vehicle. Installation is straightforward and requires no modification to the stock A/C lines. The kit comes complete with a silicone throttle-body coupler, a silicone PCV hose, and necessary gaskets for the Y-pipe and BPV.

• Part Number: MMTMIC-STI-08BKBK
• Core Dimensions: 3.75-in thickness
• Internal Volume: 584 cu. in.
• Construction: TIG-welded cast aluminum end tanks with bar-and-plate core
• Finish: Stealth Black powder coating with black silicone hoses
• Power Support: Rated up to 400 whp
• Includes: Y-pipe gaskets, BPV gasket, silicone PCV hose, and throttle-body coupler
• Mishimoto Lifetime Warranty included

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models.

Manage engine bay heat and protect your top-mount intercooler with the Mishimoto MMTB-WRX-15 Turbo Blanket. This component is engineered as a direct fit for the factory Garrett turbocharger to isolate the hot side, maintaining exhaust gas velocity for more efficient spooling while preventing radiant heat from increasing intake air temperatures.

The blanket is built for extreme thermal environments, featuring an outer layer of volcanic lava rock and titanium woven fabric. The inner layer is composed of high-silica fabric reinforced with a stainless-steel mesh to ensure long-term durability under high-stress conditions. This construction allows the internal layer to withstand temperatures up to 2,300°F (1,260°C) while the outer layer protects against temperatures over 1,760°F (960°C).

• Direct fit for 2015-2021 Subaru WRX factory Garrett turbochargers
• Outer Layer: Volcanic lava rock and titanium woven fabric
• Inner Layer: High-silica fabric with stainless-steel mesh
• Interior Temperature Rating: 2,300°F (1,260°C)
• Exterior Temperature Rating: 1,760°F (960°C)
• Reduces radiant heat to protect sensitive engine bay components and cooling systems
• Mishimoto Lifetime Warranty included
• Part Number: MMTB-WRX-15

The Mishimoto Universal Turbo Blanket Hardware Kit (MMTB-HDWR) provides the professional-grade fastening components needed to secure your turbocharger thermal protection. This kit ensures that blankets stay firmly attached to the exhaust housing, maintaining peak thermal efficiency and protecting surrounding engine bay components from extreme radiant heat.

• Includes 70-in (18 cm) of 304 stainless-steel wire for custom securing
• Includes two 304 stainless steel springs for high-tension mounting
• Specifically designed to secure Mishimoto turbo blankets to the turbocharger
• All components constructed from corrosion-resistant 304 stainless steel for maximum durability
• Manufacturer Part Number: MMTB-HDWR
• Mishimoto Lifetime Warranty

Fits select 2004-2016 Chevrolet Silverado/Express and GMC Sierra/Savana (6.6L Duramax) models equipped with the stock turbocharger.

Protect your engine bay and optimize turbocharger efficiency with the Mishimoto MMTB-DMAX-05 Turbo Blanket. Turbochargers generate massive amounts of radiant heat that can soak into intake components and vital cooling systems, robbing your Duramax engine of power. This blanket insulates the turbine housing to keep exhaust gases hot—improving turbo spool and velocity—while significantly lowering underhood temperatures.

Engineered for extreme durability, this blanket features a multi-layer construction designed to withstand the rigors of heavy-duty use. The outer layer is crafted from volcanic lava rock and titanium woven fabric, while the interior uses high-silica fabric reinforced with stainless-steel mesh to maintain its structural integrity under constant thermal cycling.

• Direct fit for stock turbochargers on 2004.5-2016 6.6L LLY, LBZ, LMM, and LML Duramax engines
• Interior layer rated to withstand 2,300°F (1,260°C)
• Outer layer protects against temperatures over 1,760°F (960°C)
• Constructed with volcanic lava rock and titanium woven fabric
• Includes stainless-steel mesh and high-silica inner lining for maximum heat retention
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMTB-DMAX-05

Fits 2001-2004 Chevrolet Silverado 2500 HD and 3500 (6.6L).

The Mishimoto turbo blanket is designed to manage the extreme thermal energy produced by the 6.6L Duramax stock turbocharger. By insulating the turbine housing, this blanket keeps exhaust gases hotter, maintaining higher gas velocity for improved turbo spool and overall efficiency. Simultaneously, it significantly lowers engine bay temperatures to protect sensitive cooling components and electrical systems from heat soak.

Constructed for heavy-duty longevity, this blanket features an outer layer made from volcanic lava rock and titanium woven fabric. The interior is lined with high-silica fabric and reinforced with stainless-steel mesh to ensure the blanket retains its shape and protection under intense heat cycles. This direct-fit thermal barrier is a vital upgrade for maintaining performance and protecting your engine bay.

• Direct fit for stock 2001-2004 Chevrolet Silverado 6.6L Duramax turbochargers
• Interior layer withstands temperatures over 2,300°F (1,260°C)
• Outer layer protects against temperatures over 1,760°F (960°C)
• Multi-layer volcanic rock, titanium, and high-silica construction
• Includes stainless-steel mesh for maximum durability
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMTB-DMAX-01

Fits 2017-2021 Honda Civic Type R and Type R Limited Edition.

The Mishimoto MMTB-CTR-17 turbo blanket is designed to isolate the intense heat generated by the stock turbocharger, preventing it from radiating throughout the engine bay. By keeping exhaust gases hot within the turbine housing, this blanket maintains gas velocity for improved turbo spool and efficiency while protecting sensitive cooling and electrical components from heat soak.

This blanket is engineered for extreme thermal management, featuring an outer layer of volcanic lava rock and titanium woven fabric. The internal structure uses a high-silica fabric reinforced with stainless-steel mesh for long-term durability under high-stress conditions. The interior layer is rated to withstand temperatures up to 2,300°F (1,260°C), providing a professional-grade thermal barrier backed by the Mishimoto Lifetime Warranty.

• Direct fit for the factory turbocharger on 2017-2021 Honda Civic Type R
• Internal layer rated to 2,300°F (1,260°C); external layer rated to 1,760°F (960°C)
• Constructed from volcanic lava rock, titanium fabric, high-silica, and stainless steel
• Reduces intake air temperatures by minimizing engine bay heat soak
• Retains exhaust energy for improved turbocharger response
• Manufacturer Part Number: MMTB-CTR-17

Fits 2016-2021 Honda Civic 1.5T models, including Si, Sport, and Touring trims.

Protect your engine bay from the excessive heat generated by the factory turbocharger with the Mishimoto MMTB-CIV-16 Turbo Blanket. By insulating the turbine housing, this blanket keeps exhaust gases hot—improving turbo spool and efficiency—while significantly reducing radiant heat that can heat-soak intake components and degrade cooling system performance. This thermal management solution is critical for maintaining consistent power in forced-induction 1.5L engines.

This direct-fit blanket is engineered for extreme durability using premium thermal materials. The outer layer features a rugged blend of volcanic lava rock and titanium woven fabric to withstand external temperatures up to 1,760°F (960°C). Internally, high-silica fabric reinforced with stainless-steel mesh handles temperatures exceeding 2,300°F (1,260°C), ensuring the heat stays inside the turbo and away from sensitive plastic components and wiring.

• Direct fit for the stock turbocharger on 2016-2021 Honda Civic 1.5T
• Dual-layer construction with volcanic lava rock, titanium, and high-silica fabric
• Internal temperature rating: 2,300°F (1,260°C)
• External temperature rating: 1,760°F (960°C)
• Protects cooling components and reduces intake air temperatures
• Backed by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMTB-CIV-16

Fits 2023-2025 Nissan Z Sport, Performance, Nismo, and Proto Spec models (3.0L).

While the factory air-to-water intercoolers on the VR30DDTT-equipped Nissan Z are sufficient for stock operation, they are prone to heat soak as power levels increase through tuning and performance upgrades. The Mishimoto Air-to-Water Intercooler Kit (MMINT-Z-23) replaces the restrictive factory units with high-efficiency bar-and-plate cores designed for superior durability and heat rejection.

This kit features cast aluminum end tanks to eliminate the potential leak points and stress concentrations common in welded tanks. By increasing core volume by 49.8% and reducing restriction by 51.4%, these intercoolers allow your twin-turbocharged system to breathe more efficiently. In testing, this resulted in charge air temperatures up to 23°F cooler than stock and power gains of up to 13 HP and 16 lb-ft of torque on a stock tune. The system is a direct-fit, bolt-on solution requiring no cutting or permanent vehicle modifications.

• 49.8% increase in core volume over stock intercoolers
• 51.4% less restrictive than the factory system
• Reduces charge air temperatures by up to 23°F
• Power gains of up to 13 HP and 16 lb-ft of torque (stock tune)
• Durable bar-and-plate core with cast aluminum end tanks
• Includes ancillary hoses and couplers for a complete installation
• Manufacturer Part Number: MMINT-Z-23
• Backed by the Mishimoto Lifetime Warranty

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models.

The Mishimoto Front-Mount Intercooler Kit is engineered for Subaru WRX owners looking to maximize cooling efficiency and airflow on vehicles demanding more than a top-mount can provide. This kit features a large 28-inch intercooler core with a 3.5-inch thickness, optimized for heat exchange during high-load conditions such as track sessions or competitive use. The system is designed to minimize pressure drop, reducing stress on the turbocharger while maintaining high airflow velocities.

This kit includes mandrel-bent aluminum piping tailored for throttle response: 2.25-inch diameter hot-side piping maintains air velocity, while the cold-side piping transitions from 2.5 to 2.75 inches to match the factory throttle body. Installation is streamlined with an application-specific crash bar that mounts to existing factory points, requiring no cutting of the front bumper and retaining the stock fog lights.

• 3.5-inch thick intercooler core with cast aluminum end tanks for superior flow and strength
• CFD-tested end tank design eliminates sharp bends and internal turbulence
• Mandrel-bent aluminum piping with CNC-machined turbo-side flange for leak-free connections
• Includes application-specific crash bar, mounting brackets, and air intake bracket
• Includes all necessary silicone couplers and T-bolt clamps for installation
• Compatible with stock or Mishimoto Performance Air Intake
• Manufacturer Part Number: MMINT-WRX-15SL

The Mishimoto Z Line universal front-mount intercooler delivers high-efficiency cooling capacity for turbocharged applications requiring a compact, high-performance heat exchanger. Engineered for durability and thermal management, this unit is constructed from 6061 aluminum and features a robust bar-and-plate core designed to withstand high boost pressures.

Each intercooler is precision TIG-welded for maximum structural integrity at the end tanks. For versatile installation, the housing includes six threaded mounting points to accommodate custom brackets. This Z Line model features a gold finish and includes the Mishimoto logo on a single side, allowing the installer to choose between a branded or a clean, stealth look.

• Manufacturer Part Number: MMINT-UZG
• Construction: Bar-and-plate core, TIG-welded end tanks
• Material: 6061 Aluminum
• Overall Dimensions: 28" x 8" x 3"
• Core Dimensions: 21" x 6" x 2.5"
• Mounting Points: 6 M8x1.25 threaded points
• Finish: Gold

The Mishimoto Z Line universal intercooler provides high-efficiency cooling for turbocharged and supercharged applications where space and thermal management are critical. Built with a robust bar-and-plate core, this intercooler offers superior heat dissipation and resistance to heat soak compared to standard tube-and-fin designs. Each unit is constructed from high-grade 6061 aluminum and precision TIG-welded to ensure structural integrity under high boost pressures.

This intercooler features a stealthy black coated finish, making it an ideal choice for "sleeper" builds or a low-profile aesthetic. The design includes six threaded mounting points to simplify custom fabrication and mounting on a variety of chassis. For aesthetic flexibility, the Mishimoto logo is applied to only one side of the core, allowing the unit to be installed with or without visible branding.

• Core Type: Bar-and-plate for enhanced thermal mass and cooling efficiency
• Material: 100% 6061 aluminum construction
• Manufacturing: Precision TIG-welded end tanks for maximum durability
• Mounting: 6 threaded mounting points for universal installation
• Finish: Coated all-black finish
• Manufacturer Part Number: MMINT-UZB

The Mishimoto Z Line Universal Front-Mount Intercooler (MMINT-UZ) provides high-efficiency cooling capacity for larger turbo applications. Designed to mitigate heat soak and maintain lower intake air temperatures, this unit is ideal for custom forced induction setups where space and performance are critical.

Constructed from 100% 6061 aluminum, this intercooler features a robust bar-and-plate core for superior heat dissipation and durability under high boost pressures. The end tanks are fully TIG-welded to ensure structural integrity and leak-free performance. For versatile installation, the core includes six threaded mounting points to accommodate various custom bracket configurations. For aesthetic choice, the Mishimoto logo is applied to one side of the core only, allowing for a branded or clean look depending on the mounting orientation.

• Core Construction: Bar-and-plate
• Material: TIG-welded 6061 aluminum
• Finish: Silver
• Mounting: 6 threaded points for universal fitment
• Manufacturer Part Number: MMINT-UZ

The Mishimoto S Line Universal Intercooler (MMINT-USB) provides the cooling capacity required for high-performance turbocharged and supercharged applications. This unit is built for durability and thermal efficiency, utilizing a robust 3-inch thick bar-and-plate core that significantly reduces intake air temperatures (AITs) to improve engine output and protect against heat soak during spirited driving or track sessions.

• Construction: Precision TIG-welded 6061 aircraft-quality aluminum
• Core Type: Durable bar-and-plate for superior heat transfer
• End Tanks: One-piece cast aluminum for high boost reliability
• Overall Size: 31" x 12" x 3"
• Core Size: 23" x 12" x 3"
• Inlet / Outlet: 3.0"
• Finish: Stealth black powder coat
• MPN: MMINT-USB

Note: This intercooler features the Mishimoto logo on one side of the core only, allowing you to choose between a branded or a clean, unbranded look during installation.

The Mishimoto S-Line Universal Intercooler is engineered to manage the extreme thermal loads of high-horsepower turbocharged and supercharged applications. Utilizing a heavy-duty bar-and-plate core, this intercooler maximizes heat transfer and significantly reduces induction air temperatures (AITs) to maintain consistent engine performance and safety under high boost.

Constructed from 6061 aircraft-quality aluminum, the S-Line features robust, one-piece cast aluminum end tanks that are precision TIG-welded to ensure structural integrity in high-pressure environments. The 3-inch core depth and matching 3-inch inlets provide the necessary flow volume for builds requiring efficient cooling without excessive pressure drop. For aesthetic flexibility, the Mishimoto logo is featured on one side of the core only, allowing for a branded or stealth appearance.

• Overall Size: 31" x 12" x 3"
• Core Size: 23" x 12" x 3"
• Inlet / Outlet: 3"
• Core Construction: Bar-and-plate
• Material: TIG-welded 6061 Aluminum
• Finish: Silver
• Manufacturer Part Number: MMINT-US

Engineered for high-horsepower turbocharged and supercharged builds, the Mishimoto R-Line Universal Intercooler (MMINT-URB) delivers the massive cooling capacity necessary for extreme performance. This intercooler features a high-volume 4-inch thick bar-and-plate core designed for superior heat transfer and significantly reduced intake air temperatures (IATs).

Constructed from precision TIG-welded 6061 aircraft-grade aluminum, the R-Line is built for maximum durability. The robust, one-piece cast aluminum end tanks are designed to withstand high boost pressures without failure. For aesthetic flexibility, the Mishimoto logo is featured on only one side of the core, allowing for a branded or stealth appearance during installation.

• Core Size: 24" x 12" x 4"
• Overall Size: 31" x 12" x 4"
• Inlet/Outlet: 3"
• Core Construction: Bar-and-Plate
• Material: 6061 Aluminum
• Finish: Stealth Black
• Manufacturer Part Number: MMINT-URB

The Mishimoto R-Line Universal Intercooler provides the cooling capacity and airflow volume required for high-horsepower turbocharged and supercharged applications. This front-mount intercooler is engineered with a massive 4-inch thick bar-and-plate core to maximize heat transfer and significantly reduce induction air temperatures (AITs) for improved engine output.

Constructed from 6061 aircraft-quality aluminum, the R-Line features robust, one-piece cast aluminum end tanks that are precision TIG welded to withstand extreme boost pressures. The 3-inch inlets and outlets ensure optimal flow for high-performance builds. For aesthetic flexibility, the Mishimoto logo is painted on only one side of the core, allowing for either a branded appearance or a clean, stealth look.

• Manufacturer Part Number: MMINT-UR
• Core Size: 24" x 12" x 4"
• Overall Size: 31" x 12" x 4"
• Inlet / Outlet: 3"
• Core Type: Bar-and-Plate
• Material: 6061 Aluminum with TIG-welded cast end tanks

This universal front-mount intercooler is designed for smaller turbocharger applications. The Mishimoto M-Line Eat Sleep Race Special Edition Gold Intercooler (MMINT-UMG) combines a unique limited-edition aesthetic with performance-oriented engineering. Featuring a gold core and matching gold end tanks, it provides a distinctive look while ensuring efficient heat dissipation for forced induction systems.

Every unit is constructed from 6061 aluminum and precision TIG welded for long-term reliability. The one-piece cast aluminum end tanks are built to handle high boost pressures, offering a significant upgrade over multi-piece or plastic-tank designs. With four universal mounting points, this intercooler is a versatile choice for custom fabrication projects.

• Limited Edition Eat Sleep Race gold finish on core and end tanks
• Precision TIG-welded 6061 aluminum construction
• Robust one-piece cast aluminum end tanks for high-boost durability
• Four universal threaded mounting points for custom installation
• Optimized for smaller turbocharger applications
• Mishimoto logo on one side for a clean or branded look
• Manufacturer Part Number: MMINT-UMG

The Mishimoto M Line universal front-mount intercooler is engineered to provide efficient cooling for smaller turbocharged applications where space and stealth are priorities. This unit utilizes a bar-and-plate core design, offering superior thermal management and durability compared to standard tube-and-fin alternatives. Each unit is constructed from high-grade 6061 aluminum and precision TIG-welded for maximum structural integrity.

Built to handle increased induction loads, the MMINT-UMB features robust one-piece cast aluminum end tanks that are designed to withstand high boost pressures without failure. The sleek black finish provides a discrete "sleeper" look, while the intercooler remains identifiable via the Mishimoto logo on one side (reversible for a clean look). Integration into your custom setup is straightforward thanks to four universal threaded mounting points.

• Construction: TIG-welded 6061 aluminum
• Core Type: Bar-and-plate
• End Tanks: One-piece cast aluminum
• Finish: Black coating
• Mounting: 4 universal mounting points
• MPN: MMINT-UMB

The Mishimoto M Line Universal Intercooler (MMINT-UM) provides efficient cooling capacity for smaller turbocharged applications where space is limited but performance is critical. Designed for durability under high-boost conditions, this intercooler utilizes a robust bar-and-plate core and one-piece cast aluminum end tanks for superior structural integrity compared to stamped alternatives.

• Manufactured from high-grade 6061 aluminum with precision TIG welding for long-term reliability.
• Robust, one-piece cast aluminum end tanks are engineered to withstand high boost pressures without failure.
• Includes four universal threaded mounting points to simplify custom front-mount installations.
• Features the Mishimoto logo on a single side, offering the choice of a branded or a clean, stealth look.
• Manufacturer Part Number: MMINT-UM

The Mishimoto J-Line Universal Intercooler is engineered for high-performance builds where front-end space is limited. Despite its compact footprint, this front-mount intercooler is rated to handle up to 500 HP, providing a cooling solution that often avoids the need for crash bar removal. It features a high-visibility gold finish for a distinct aesthetic under the hood or behind the bumper.

Built from 6061 aluminum and TIG welded for maximum durability, the J-Line utilizes a robust bar-and-plate core. This design facilitates efficient heat transfer to reduce air intake temperatures (AITs) while maintaining structural integrity under high boost pressures. The one-piece cast aluminum end tanks further improve airflow and reliability over multi-piece alternatives.

• Manufacturer Part Number: MMINT-UJG
• Core Thickness: 3.75 inches
• Inlet/Outlet: 2.5 inches
• Material: 6061 Aluminum
• Core Type: Bar-and-plate
• Horsepower Rating: 500 HP
• Finish: Gold

The Mishimoto Universal J-Line Intercooler (MMINT-UJB) is engineered to provide high-efficiency cooling for vehicles with limited front-end space. Designed to support up to 500 HP, this compact front-mount intercooler often allows for significant power gains without the need to remove or modify the factory crash bar.

Built for durability and performance, the J-Line features a 3.75-inch thick bar-and-plate core that maximizes heat transfer and effectively reduces intake air temperatures (IATs). The assembly is constructed from TIG-welded 6061 aluminum with one-piece cast end tanks, ensuring the unit can withstand high boost pressures in demanding street or track applications.

• Manufacturer Part Number: MMINT-UJB
• Core Thickness: 3.75"
• Inlet/Outlet Diameter: 2.5"
• Construction: TIG-welded 6061 aluminum
• Core Type: Bar-and-plate
• End Tanks: One-piece cast aluminum
• Power Rating: Up to 500 HP
• Finish: Stealth Black

The Mishimoto J-Line universal front-mount intercooler is engineered for high-performance builds where front-end space is at a premium. Designed to handle up to 500HP, this compact intercooler provides a high-flow cooling solution that often allows builders to retain the factory crash bar and original bumper fitment in tight engine bays.

Constructed from 6061 aluminum and precision TIG welded, the J-Line features a robust bar-and-plate core for superior heat transfer and effective reduction of intake air temperatures (IATs). The one-piece cast aluminum end tanks provide maximum structural integrity to withstand high boost pressures without the risk of splitting or leaking common in multi-piece designs.

• Power Rating: Rated for up to 500HP
• Core Dimensions: 3.75-inch thick high-efficiency core
• Inlet/Outlet: 2.5-inch diameter for optimal flow
• Construction: TIG-welded 6061 aluminum
• Core Type: Durable bar-and-plate
• End Tanks: Robust one-piece cast aluminum
• Manufacturer Part Number: MMINT-UJ

The Mishimoto G-Line universal front-mount intercooler is engineered to provide reliable cooling capacity for smaller turbocharger applications. This compact intercooler is an ideal solution for custom builds requiring efficient thermal management without the bulk of a full-size race core.

Constructed from 6061 aluminum and TIG welded for maximum durability, this unit features a robust bar-and-plate core designed for superior heat transfer and significant intake air temperature (AIT) reduction. The one-piece cast aluminum end tanks are built to withstand high boost pressures, ensuring long-term performance under load. For a versatile look, the intercooler is finished in a stealthy black coating with the Mishimoto logo printed on only one side, allowing for a "sleeper" appearance if desired.

• Manufacturer Part Number: MMINT-UGB
• Core Type: Durable bar-and-plate for optimal heat dissipation
• Material: 6061 aluminum with one-piece cast aluminum end tanks
• Construction: Precision TIG welded
• Mounting: Four M8 x 1.25 threaded universal mounting points
• Finish: Stealth black coating

The Mishimoto G-Line Universal Intercooler (MMINT-UG) is engineered to provide efficient cooling for smaller turbocharger applications where space and heat management are critical. Featuring a high-efficiency bar-and-plate core, this front-mount unit effectively reduces air intake temperatures (AITs) to maintain consistent power delivery and prevent heat soak.

Built for durability and performance, this intercooler is constructed from 6061 aluminum and precision TIG-welded. The robust one-piece cast aluminum end tanks are designed to withstand high boost pressures without the risk of failure associated with stamped or multi-piece designs. For aesthetic flexibility, the Mishimoto logo is painted on only one side of the core, allowing you to choose between a branded or a clean, stealth appearance.

• Core Type: Durable bar-and-plate for superior heat transfer
• Construction: TIG-welded 6061 aluminum with cast end tanks
• Mounting Points: Four M8 x 1.25 threaded universal points for secure installation
• Overall Size: 24.5" x 11.75" x 3"
• Core Size: 17.5"
• Finish: Silver
• Manufacturer Part Number: MMINT-UG

Fits 2018-2023 Kia Stinger and 2019-2025 Genesis G70 models equipped with the 3.3T Lambda II GDI engine.

The factory intercooling system on the 3.3T platform utilizes a restrictive tube-and-fin core with plastic end tanks that are prone to heat soak and potential failure under increased boost. The Mishimoto Performance Intercooler Kit replaces the entire system from the turbos to the throttle body, providing a significant upgrade in cooling efficiency and airflow. This kit features a robust bar-and-plate core TIG-welded to cast aluminum end tanks for superior heat dissipation and durability.

Mishimoto engineers expanded the core to provide a 94% increase in internal volume and a 74% increase in external fin surface area. The included piping kit upgrades the system to 3-inch inner diameter aluminum pipes to minimize pressure drop. The kit also features a redesigned piping merger manifold with 2-inch inlets and a 3-inch outlet, increasing flow by 51% while retaining compatibility with stock recirculation valves.

• Manufacturer Part Number: MMINT-STNGR-18SL
• Bar-and-plate intercooler core with cast aluminum end tanks
• 94% increase in core volume and 74% increase in external fin surface area
• 3-inch mandrel-bent aluminum piping with micro-wrinkle black powder coat
• Includes 5-layer silicone couplers for secure, high-pressure connections
• Reduces outlet temperatures by up to 29°F (stock tune) and 41°F (Stage 1 tune)
• Dyno-proven gains of 8 whp and 8 wtq on stock tuning
• Direct fitment for specified 3.3T AWD and RWD models

Fits select 2018-2025 Genesis G70 and Kia Stinger models (3.3T).

Improve the cooling efficiency and airflow of your Lambda II GDI 3.3T engine with the Mishimoto Performance Intercooler Kit. This comprehensive kit overhauls the entire intercooling system from the turbochargers to the throttle body, replacing restrictive factory components with high-performance hardware designed for durability and heat dissipation.

The centerpiece of this kit is a robust bar-and-plate intercooler core, TIG-welded to cast aluminum end tanks. This replaces the prone-to-leak plastic end tanks and tube-and-fin core found on the OEM unit. With a 94% increase in core volume and a 74% increase in external fin surface area, this intercooler is engineered to handle higher boost levels. The kit includes 3-inch inner diameter aluminum piping and a dedicated piping merger manifold that increases the inlet size to 2 inches and the outlet to 3 inches, resulting in a 51% boost in flow over stock piping.

• Direct fit for 2018-2025 Genesis G70 and Kia Stinger 3.3T models
• Reduces outlet temperatures by up to 29°F on stock tuning and 41°F on Stage 1 maps
• Provides dyno-proven gains of up to 8 whp and 8 wtq
• Features a 94% increase in core volume and 74% more external fin surface area
• 3-inch aluminum piping with a micro-wrinkle black powder-coated finish
• Includes cast aluminum merge manifold and 5-layer silicone couplers
• Retains compatibility with factory recirculation valves
• Manufacturer Part Number: MMINT-STNGR-18BK

Fits 2003-2005 Dodge Neon SRT-4.

Heat soak is the primary obstacle to maintaining consistent power in forced-induction vehicles. The Mishimoto Performance Intercooler Kit is engineered to replace the restrictive factory tube-and-fin unit with a high-efficiency bar-and-plate core. This design significantly reduces intake air temperatures and provides the thermal capacity needed for daily driving, autocross, or high-boost applications.

Constructed with cast aluminum end tanks, this intercooler ensures smoother internal airflow and superior durability under pressure compared to stamped or welded alternatives. This kit is a true bolt-on upgrade that requires no vehicle modifications and is specifically designed to retain the factory bumper crash bar, ensuring a straightforward installation without sacrificing structural integrity.

• Reduces intake temperatures by more than 15% over the stock unit
• Delivers 40% less pressure drop than the factory cooler
• Large bar-and-plate core for maximum heat dissipation
• High-quality cast aluminum end tanks for improved airflow
• Direct-fit design retains factory crash bar; no vehicle modification required
• Finish: Silver Aluminum
• Manufacturer Part Number: MMINT-SRT4-03SL
• Mishimoto Lifetime Warranty included

Fits 2003-2005 Dodge Neon SRT-4.

Heat soak is the primary obstacle to consistent power in the turbocharged Neon SRT-4. The Mishimoto Performance Intercooler Kit (MMINT-SRT4-03BK) addresses the limitations of the factory tube-and-fin unit with a high-efficiency bar-and-plate core. This design is engineered to withstand high boost pressures and provides more surface area for heat dissipation, resulting in a 15% reduction in intake air temperatures compared to stock.

Constructed with durable cast aluminum end tanks, this intercooler optimizes airflow while offering a significant 40% reduction in pressure drop. This allows your turbocharger to work more efficiently, delivering more density to the engine with less strain. Designed as a direct-fit upgrade, it bolts onto factory mounting points and retains the OEM bumper crash bar, requiring no vehicle modifications for installation.

• High-efficiency bar-and-plate core construction
• Durable cast aluminum end tanks for improved airflow
• 40% less pressure drop than the factory cooler
• Reduces intake temperatures by more than 15%
• Bolt-on installation requires no trimming or modifications
• Maintains factory bumper crash bar compatibility
• Sleek black finish for a stealth appearance
• Includes Mishimoto Lifetime Warranty
• MPN: MMINT-SRT4-03BK

Fits 2016-2018 Ford Focus RS (2.3L).

Optimize your vehicle's charge air system with the Mishimoto Performance Intercooler Kit. Engineered as a direct-fit solution, this kit utilizes a robust bar-and-plate core to provide a 36% increase in internal core volume and a 214% increase in external fin surface area over the factory unit. These improvements result in a 40% reduction in air outlet temperatures and proven gains of 7hp and 8ft-lbs of torque.

This comprehensive kit (MPN: MMINT-RS-16KBK) also includes the Mishimoto performance intercooler piping. The hot-side pipe features a 40% increase in internal volume and is specifically shaped to direct airflow over the stock PTU cooler. The cold-side pipe is constructed from 5-layer wire-reinforced silicone for superior durability under high boost levels, collectively reducing pressure drop by up to 46% compared to stock piping.

• Direct-fit for 2016-2018 Ford Focus RS 2.3L EcoBoost
• 80% increase in overall core size over stock
• 36% increase in internal core volume and 214% increase in external fin surface area
• Includes high-flow hot-side and cold-side piping kits
• Reduces pressure drop by 46% (cold-side) and 45% (hot-side)
• Bar-and-plate construction with a sleek black finish
• Manufacturer Part Number: MMINT-RS-16KBK
• Mishimoto Lifetime Warranty included