Turbo Upgrade; Incl. Turbo/Lower Intake Manifold/Exhaust Heat Shield/EGR Inlet Tube/Exhaust Outlet Tubes/Intake Shields/Turbo Oil Line/Hardware;

• Incl. Lower Intake Manifold/Exhaust Heatshield/EGR Inlet Tube
• Incl. Intake Shields/Turbo Oil Line/All Gaskets Including EGR
• Incl. Turbo Outlet Clamps/Exhaust Outlet Tubes
• Incl. All Fasteners/Spacers/Studs
• Incl. Turbocharger Assembly
• Made in the USA

This Part Fits:

Turbo Upgrade; High Performance Turbocharger; 50mm Wheel Turbine Wheel;

• Pairs Well With The Ford Performance M-6250-23EBH Camshafts
• Compressor Wheel Increased From 60mm To 63mm
• Compressor Housing Volute Is Enlarged
• 50mm Wheel Turbine Wheel

This Part Fits:

With a stronger mounting provision, these Variable Cam Timing (VCT) solenoids are more robust for racing applications, and offer increased strength over OEM solenoids

• For Comp. Pumps w/Gear Sets see PN M-6600-50CJ or M-6600-M52
• Produced By OEM Manufacturer To Minimum Allowable Tolerances
• Works Well w/5.0L Coyote Oil Pump Install Kit M-6600-A50PKIT
• Requires Installation in Factory Oil Pump
• Made in the USA

This Part Fits:

Ford Performance Parts is pleased to announce our supercharger kit for the 2024 5.0L Mustang GT and Dark Horse. Developed by Whipple Superchargers in partnership with Ford Performance Engineering, this kit delivers on performance. The Ford Performance package delivers 810 HP @ 7,500 RPM and 615 lb.-ft. of torque @ 4,800 RPM for active exhaust equipped Mustangs. (10 HP less for non-active exhaust).

• Ford Performance EXCLUSIVE 3yr/36k mile warranty when installed by a Ford dealer or ASE certified technician
• Factory strut tower brace is NOT compatible with the FPP supercharger kit
• Warranty when registered through the Ford Performance Parts Tech-line
• Engineered and tested to Ford Motor Company's rigorous standards
• Engineered and tested to Ford Motor Companys rigorous standards
• Whipple exclusive inverted twin screw design
• Ford Performance Exclusive Calibration
• Tomahawk calibration delivery tool
• Patented Dual Pass Intercooler
• Premium Fuel Required

This Part Fits:

Ford Performance Parts is pleased to announce the 2021-2022 F150 5.0L Supercharger kit. In partnership with Whipple Superchargers, the Ford Performance kit produces 700hp at 6,500 RPM and 590 lb./ft of torque at 5,000 RPM.

• 3 Year/36k Mile FPP Warranty When Installed By A Ford Dealer Or ASE Certified Technician
• Engineered And Tested To Ford 100k Mile Standards
• Features The Gen 5 x 3.0L Whipple Supercharger
• Whipple Exclusive Inverted Twin-Screw Design
• Ford Performance Exclusive Calibration
• Tomahawk Calibration Tool Included
• Patented Dual Pass Intercooler
• Fits 4x2 And 4x4 Vehicles
• Premium Fuel Required

This Part Fits:

The Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 04.5-10 Duramax diesels. It comes with a Fleece Performance 63mm FMW compressor wheel and 66mm high flow turbine wheel. This drop-in replacement turbo is guaranteed to enhance your driving experience. You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at 625 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket. Stock Appearing: 100% Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost. Proven Technology: These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that. Powerful Yet Responsive: These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. Exclusive FMW Wheel Technology: Forged Milled Wheels are Stronger than Billet Faster Spool-Up Increased Throttle Response Broader Torque Curve

This Part Fits:

Kit Contents: FPE-CTDT-KIT, FPE-CRTFL-S3S4, FPE-6.7CR-COOL-PLUGTurbo Stud Kit, T4 Turbo Gasket

This Part Fits:

Fleece Performance 89-07 Dodge 5.9L Cummins S300-S400 Turbo Installation Kit

This Part Fits:

Fleece Performance cast aluminum turbo discharge adapter for S400 turbochargers. Easily adapts your turbocharger compressor cover to a 3" charge air cooler hose. Kit Includes: 90 degree cast aluminum discharge adapter (3" OD) S400 v-band compressor outlet clamp O-ring for 90 discharge adapter

This Part Fits:

Amplify your driving experience with a Fleece Performance Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel. This turbo is capable of supporting 650HP, without sacrificing any drivability. Enjoy smooth and quick throttle response with big top end power. Whether it's towing, racing, sled pulling, or just driving to work the Cheetah will get the job done. Cheetah Turbocharger Benefits: Drop-In Replacement Fleece Performance Exclusive FMW Compressor Wheel Technology Max Rear Wheel HP Rating: 650HP A 2015-2019 Powerstroke turbocharger must be returned in order to obtain a core refund. Call us at 317-286-3573 or email cores@fleeceperformance.com with any questions.

This Part Fits:

The 63mm FMW Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 2011-2016 Duramax diesels. It comes with a Fleece Performance Engineered 63mm FMW compressor wheel and high flow Cheetah turbine wheel. This drop-in replacement turbo is guaranteed to enhance your driving experience. You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at 650 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket. Aftermarket tuning and aftermarket high flow exhaust are required for installation of this turbo. Stock Appearing: 100% Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost. Proven Technology: These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that. Powerful Yet Responsive: These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. FPE Exclusive FMW Wheel Technology: Forged Milled Wheels are Stronger than Billet Faster Spool-Up Increased Throttle Response Broader Torque Curve 2.5" Work Stock Legal The Ultimate Drop-In Replacement Performance Turbocharger

This Part Fits:

Wake up your 2001-2004 LB7 with the drop in replacement Fleece Performance LB7 Cheetah Turbocharger. Featuring a Fleece Performance custom 63mm billet compressor wheel and high flow Inconel turbine wheel, this turbo can power your truck all the way up to 625RWHP! 100% Drop in Replacement Includes Installation Kit and LB7 High Flow Intake Horn No Core Charge! FITMENT: For Federal Emissions equipped vehicles ONLY, does not fit California delivered vehicles.

This Part Fits:

Fleece Performance Cheetah turbochargers set the industry standard for power, quality, and reliability. Designed as a stock appearing, drop-in replacement turbocharger capable of much more! With our exclusive 63mm compressor wheel and Inconel turbine wheel technology, you’ll enjoy smooth throttle response, big top-end power, and that classic Cheetah sound!The Cheetah Features:Drop-in ready - maintains all OEM factory turbocharger functions including exhaust brakeBrand new - no core charge or core to return Supports up to 650 RWHP1-Year Limited WarrantyEO# D-834-19Included with the Cheetah: EGR tube gasket to intake bridge (qty 1) EGR coolant pipe gasket (qty 1)PCV to compressor cover (qty 1)Gasket; coolant feed, coolant return, oil feed (qty 3)Turbine housing to catalyst (qty 1)Oil drain gasket (qty 2)Pedestal gasket (qty 1)Application NotesThis turbocharger is sold without an actuator and requires the use of the vehicle's original actuator, or applicable replacement actuator. Key GM part numbers by model year are: 2017-2019 L5P: Actuator part number 12723306, 12683993, or 126839822020-2023 L5P: Actuator part number 12723081 or 12707578This turbocharger replaces OEM part numbers 12723305 (MY 2017-2019) and 12723083 (MY 2020-2023)

• Drop-in ready - maintains all OEM factory turbocharger functions including exhaust brake
• Brand new - no core charge or core to return
• Supports up to 650 RWHP
• 1-Year Limited Warranty

This Part Fits:

Fleece Performance Cheetah Turbochargers set the industry standard for power, quality, and reliability. The Cheetah series does not require an expensive kit, just bolt it on and go. Designed as a stock appearing, drop in replacement turbo capable of much more!. With our exclusive FMW compressor wheel and inconel turbine wheel technology, you'll enjoy smooth throttle response and big top-end power. Cheetah Turbocharger Benefits: Fleece Performance Exclusive FMW Compressor Wheel Technology. Capable of supporting vehicle modifications up to 650 RWHP

This Part Fits:

Complete installation kit for VGT style turbochargers on the 2019-2024 RAM with 6.7L Cummins. Kit Includes: Turbocharger exhaust inlet gasket Turbocharger oil drain gasket Turbocharger cooling port 16mm sealing washers (4) Turbocharger mounting studs (4) Turbocharger mounting nuts (4)

This Part Fits:

Complete installation kit for VGT style turbochargers on the 2007.5-2018 RAM with 6.7L Cummins. Kit Includes: Turbocharger exhaust inlet gasket Turbocharger oil drain gasket Turbocharger cooling port 16mm sealing washers (4) Turbocharger mounting studs (4) Turbocharger mounting nuts (4)

This Part Fits: