The DeatschWerks 6-02-0116-B adapter provides a reliable, leak-free transition from an 8AN ORB (O-Ring Boss) port to a standard 3/8-inch male EFI quick connect fitting. This 180-degree straight adapter is a critical component for plumbing modern EFI fuel systems, allowing for a secure interface between fuel rails, regulators, or pumps and push-to-connect fuel lines.

Precision-machined for exact tolerances, this adapter features a durable matte black anodized finish to resist corrosion in harsh engine bay environments. Each fitting includes a high-quality O-ring to ensure a positive seal against the ORB port seat right out of the box.

• Manufacturer Part Number: 6-02-0116-B
• Fitting End A: 8AN ORB Male
• Fitting End B: 3/8" Male EFI Quick Connect
• Angle: 180-Degree (Straight)
• Material: Aluminum
• Finish: Matte Black Anodized
• Included Hardware: Viton O-ring

The DeatschWerks 6-02-0115-B adapter provides a precision-engineered solution for integrating custom fuel systems with standard 3/8-inch EFI quick-connect lines. This fitting threads directly into components featuring an 8AN ORB (O-Ring Boss) port, such as aftermarket fuel rails, regulators, or pumps, converting them to a male quick-disconnect post for a secure, leak-free connection.

• Connection: 8AN ORB Male to 3/8" Male EFI Quick Connect
• Material: High-grade aluminum with a durable matte black anodized finish
• Seal: Includes high-quality O-ring to ensure a reliable 8AN ORB seal
• Function: Adapts fuel system components to OEM-style quick-connect plumbing
• Part Number: 6-02-0115-B

The DeatschWerks 6-02-0114-B adapter allows for a direct, secure connection between a -6AN ORB (O-Ring Boss) port and a 5/16-inch EFI quick-connect male fitting. Designed for high-performance fuel system plumbing, this adapter is essential for integrating modern EFI lines with aftermarket fuel rails, regulators, or pump hangers that utilize ORB ports.

Constructed with a durable matte black anodized finish, this fitting provides excellent corrosion resistance and a clean aesthetic for engine bay plumbing. The inclusion of the O-ring ensures a reliable, leak-free seal at the ORB interface without the need for thread sealant.

• MPN: 6-02-0114-B
• Fitting A: 6AN ORB Male
• Fitting B: 5/16" EFI Quick Connect Male
• Finish: Anodized Matte Black
• Included Hardware: O-Ring

This DeatschWerks compression adapter provides a reliable, high-pressure transition from 3/8-inch OD hardlines to a standard 6AN male flare. Designed for automotive fuel, oil, and coolant systems, this fitting allows for a secure connection to factory hardlines without the need for specialized flaring tools. The included olive (ferrule) insert ensures a leak-free seal even under the vibrations of a performance environment.

• Connection Type: 6AN Male Flare to 3/8" Hardline Compression
• Finish: Anodized Matte Black for superior corrosion resistance and durability
• Hardware included: Comes with one (1) brass olive insert for a complete installation
• Material: Precision-machined aluminum construction
• Manufacturer Part Number: 6-02-0109-B

The DeatschWerks 6AN Male Flare to 5/16" Hardline Compression Adapter (6-02-0108-B) provides a secure, leak-free transition from factory hard fuel lines to high-performance AN plumbing. This adapter is specifically engineered for fuel system upgrades where flaring the original line is not practical or desired. The compression-style design allows for a reliable mechanical connection to the hardline without requiring specialized flaring tools.

Constructed for durability and precision, this fitting features a stealthy matte black anodized finish for superior corrosion resistance and a clean look in the engine bay or chassis. Each adapter includes the necessary olive insert to ensure a tight, dependable seal upon installation.

• Connection Type: 6AN Male Flare to 5/16" Hardline
• Fitting Style: Compression Adapter
• Finish: Anodized Matte Black
• Hardware Included: 1 Olive Insert
• Manufacturer Part Number: 6-02-0108-B

The DeatschWerks 6-02-0103 adapter provides a reliable solution for integrating high-performance -6AN plumbing with factory EFI fuel systems. This specialized fitting features a 3/8-inch female EFI quick-connect port, allowing it to snap directly onto standard male fuel hard lines found on many modern fuel-injected vehicles.

By converting the factory hard line to a standard -6AN male flare, this adapter simplifies the installation of aftermarket fuel rails, surge tanks, and pressure regulators without requiring permanent modifications or flaring of the vehicle's original fuel system. It is an essential component for plumbing high-flow fuel setups that require a transition from hard lines to flexible braided hoses.

• Manufacturer Part Number: 6-02-0103
• Connection Type A: -6AN Male Flare
• Connection Type B: 3/8" Female EFI Quick Connect
• Compatible with standard 3/8" male EFI hard line posts
• Designed for high-pressure fuel applications

Ensure a leak-free seal and maintain consistent fuel rail pressure with the DeatschWerks Subaru Side Feed Injector O-Ring Kit. This 8-piece hardware set is specifically engineered to replace worn or brittle factory seals on Subaru side-feed injectors, providing a precise fit for high-performance or stock fueling applications. Each kit contains the necessary upper and lower seals to service a complete set of four injectors, preventing fuel leaks and ensuring reliable engine performance.

• Designed specifically for Subaru side-feed fuel injector housings
• Includes (4) Top O-Rings and (4) Bottom O-Rings for a complete set
• Engineered from fuel-resistant elastomers for maximum service life
• Direct-fit replacement for OE injector seals
• Manufacturer Part Number: 2-002-4

Ensure a reliable, leak-free seal for your fuel system with the DeatschWerks Subaru Top Feed Injector O-Ring Kit. This 12-piece service set is specifically designed for maintaining or installing top-feed fuel injectors, providing the necessary components to replace worn or flattened factory seals that can cause vacuum leaks or fuel seepage at the rail and intake manifold junctions.

• Complete service kit for four top-feed fuel injectors
• Includes 4 top O-rings, 4 bottom O-rings, and 4 grommets/spacers
• Designed for precise fitment with Subaru top-feed applications
• Replaces critical seals during injector cleaning, testing, or upgrades
• Manufacturer Part Number: 2-001-4

This PureFlow AirDog/AirDog II Suction Tube Kit provides the essential components for reliably drawing fuel from your vehicle's fuel tank. Designed specifically for use with PureFlow AirDog and AirDog II lift pump systems, this kit ensures a consistent and uninterrupted fuel supply to your fuel filtration and delivery system.

A critical component for proper lift pump function, the suction tube kit helps prevent fuel starvation, ensuring your engine receives the clean, steady fuel flow it needs for optimal performance. This kit is a direct fit for compatible AirDog systems.

• Manufacturer Part Number: 901-01-0351-QC

Fits 2011-2019 Ford Power Stroke trucks equipped with the 6.7L diesel engine.

The Exergy Performance Improved Stock Inlet Metering Valve, also referred to as the Fuel Control Actuator (FCA) or MPROP, is an essential upgrade for the Bosch CP4 high-pressure fuel pump. This component regulates the volume of fuel entering the pump's compression chambers, ensuring stable rail pressure and consistent engine performance.

Engineered as a direct replacement for the factory unit, the E05 40105 is designed to address reliability concerns associated with the original equipment. It provides precise metering and improved resistance to debris, helping to safeguard your fuel system against the catastrophic failures often found in high-mileage CP4 pumps.

• Direct-fit replacement for the factory inlet metering valve
• Improved design for enhanced durability and debris resistance
• Maintains precise fuel pressure regulation for the 6.7L Power Stroke
• Genuine Exergy Performance component
• Manufacturer Part Number: E05 40105

The Cobb EBCS 1/4in EWG Fitting Upgrade Kit (EWG-FITTING-UPGRADE-KIT) provides the necessary hardware to transition your Cobb Electronic Boost Control Solenoid to larger diameter vacuum lines. Specifically engineered for external wastegate (EWG) configurations, this kit replaces standard small-diameter fittings with 1/4" barb connections to ensure consistent signal delivery and improved boost response in high-performance applications.

• Precision-machined fittings for a secure, leak-free seal
• Includes 1/4" barb fittings optimized for external wastegate reference lines
• Designed specifically for use with Cobb Electronic Boost Control Solenoids (EBCS)
• Facilitates higher flow for more precise wastegate actuation
• Manufacturer Part Number: EWG-FITTING-UPGRADE-KIT